qlcnic: remove dead code

This driver has several pieces of dead code (found by running
make namespacecheck). This patch removes them.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 0 insertions, 176 deletions

diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index 42a288348ac..a1fabdc10b5 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -1323,19 +1323,12 @@ netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
 void qlcnic_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring);
 
 /* Management functions */
-int qlcnic_set_mac_address(struct qlcnic_adapter *, u8*);
 int qlcnic_get_mac_address(struct qlcnic_adapter *, u8*);
 int qlcnic_get_nic_info(struct qlcnic_adapter *, struct qlcnic_info *, u8);
 int qlcnic_set_nic_info(struct qlcnic_adapter *, struct qlcnic_info *);
 int qlcnic_get_pci_info(struct qlcnic_adapter *, struct qlcnic_pci_info*);
-int qlcnic_reset_partition(struct qlcnic_adapter *, u8);
 
 /*  eSwitch management functions */
-int qlcnic_get_eswitch_capabilities(struct qlcnic_adapter *, u8,
-				struct qlcnic_eswitch *);
-int qlcnic_get_eswitch_status(struct qlcnic_adapter *, u8,
-				struct qlcnic_eswitch *);
-int qlcnic_toggle_eswitch(struct qlcnic_adapter *, u8, u8);
 int qlcnic_config_switch_port(struct qlcnic_adapter *,
 				struct qlcnic_esw_func_cfg *);
 int qlcnic_get_eswitch_port_config(struct qlcnic_adapter *,
diff --git a/drivers/net/qlcnic/qlcnic_ctx.c b/drivers/net/qlcnic/qlcnic_ctx.c
index 75e3b19e35e..1cdc05dade6 100644
--- a/drivers/net/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/qlcnic/qlcnic_ctx.c
@@ -556,32 +556,6 @@ void qlcnic_free_hw_resources(struct qlcnic_adapter *adapter)
 	}
 }
 
-/* Set MAC address of a NIC partition */
-int qlcnic_set_mac_address(struct qlcnic_adapter *adapter, u8* mac)
-{
-	int err = 0;
-	u32 arg1, arg2, arg3;
-
-	arg1 = adapter->ahw.pci_func | BIT_9;
-	arg2 = mac[0] | (mac[1] << 8) | (mac[2] << 16) | (mac[3] << 24);
-	arg3 = mac[4] | (mac[5] << 16);
-
-	err = qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
-			adapter->fw_hal_version,
-			arg1,
-			arg2,
-			arg3,
-			QLCNIC_CDRP_CMD_MAC_ADDRESS);
-
-	if (err != QLCNIC_RCODE_SUCCESS) {
-		dev_err(&adapter->pdev->dev,
-			"Failed to set mac address%d\n", err);
-		err = -EIO;
-	}
-
-	return err;
-}
 
 /* Get MAC address of a NIC partition */
 int qlcnic_get_mac_address(struct qlcnic_adapter *adapter, u8 *mac)
@@ -764,149 +738,6 @@ int qlcnic_get_pci_info(struct qlcnic_adapter *adapter,
 	return err;
 }
 
-/* Reset a NIC partition */
-
-int qlcnic_reset_partition(struct qlcnic_adapter *adapter, u8 func_no)
-{
-	int err = -EIO;
-
-	if (adapter->op_mode != QLCNIC_MGMT_FUNC)
-		return err;
-
-	err = qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
-			adapter->fw_hal_version,
-			func_no,
-			0,
-			0,
-			QLCNIC_CDRP_CMD_RESET_NPAR);
-
-	if (err != QLCNIC_RCODE_SUCCESS) {
-		dev_err(&adapter->pdev->dev,
-			"Failed to issue reset partition%d\n", err);
-		err = -EIO;
-	}
-
-	return err;
-}
-
-/* Get eSwitch Capabilities */
-int qlcnic_get_eswitch_capabilities(struct qlcnic_adapter *adapter, u8 port,
-					struct qlcnic_eswitch *eswitch)
-{
-	int err = -EIO;
-	u32 arg1, arg2;
-
-	if (adapter->op_mode == QLCNIC_NON_PRIV_FUNC)
-		return err;
-
-	err = qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
-			adapter->fw_hal_version,
-			port,
-			0,
-			0,
-			QLCNIC_CDRP_CMD_GET_ESWITCH_CAPABILITY);
-
-	if (err == QLCNIC_RCODE_SUCCESS) {
-		arg1 = QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
-		arg2 = QLCRD32(adapter, QLCNIC_ARG2_CRB_OFFSET);
-
-		eswitch->port = arg1 & 0xf;
-		eswitch->max_ucast_filters = LSW(arg2);
-		eswitch->max_active_vlans = MSW(arg2) & 0xfff;
-		if (arg1 & BIT_6)
-			eswitch->flags |= QLCNIC_SWITCH_VLAN_FILTERING;
-		if (arg1 & BIT_7)
-			eswitch->flags |= QLCNIC_SWITCH_PROMISC_MODE;
-		if (arg1 & BIT_8)
-			eswitch->flags |= QLCNIC_SWITCH_PORT_MIRRORING;
-	} else {
-		dev_err(&adapter->pdev->dev,
-			"Failed to get eswitch capabilities%d\n", err);
-	}
-
-	return err;
-}
-
-/* Get current status of eswitch */
-int qlcnic_get_eswitch_status(struct qlcnic_adapter *adapter, u8 port,
-				struct qlcnic_eswitch *eswitch)
-{
-	int err = -EIO;
-	u32 arg1, arg2;
-
-	if (adapter->op_mode != QLCNIC_MGMT_FUNC)
-		return err;
-
-	err = qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
-			adapter->fw_hal_version,
-			port,
-			0,
-			0,
-			QLCNIC_CDRP_CMD_GET_ESWITCH_STATUS);
-
-	if (err == QLCNIC_RCODE_SUCCESS) {
-		arg1 = QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
-		arg2 = QLCRD32(adapter, QLCNIC_ARG2_CRB_OFFSET);
-
-		eswitch->port = arg1 & 0xf;
-		eswitch->active_vports = LSB(arg2);
-		eswitch->active_ucast_filters = MSB(arg2);
-		eswitch->active_vlans = LSB(MSW(arg2));
-		if (arg1 & BIT_6)
-			eswitch->flags |= QLCNIC_SWITCH_VLAN_FILTERING;
-		if (arg1 & BIT_8)
-			eswitch->flags |= QLCNIC_SWITCH_PORT_MIRRORING;
-
-	} else {
-		dev_err(&adapter->pdev->dev,
-			"Failed to get eswitch status%d\n", err);
-	}
-
-	return err;
-}
-
-/* Enable/Disable eSwitch */
-int qlcnic_toggle_eswitch(struct qlcnic_adapter *adapter, u8 id, u8 enable)
-{
-	int err = -EIO;
-	u32 arg1, arg2;
-	struct qlcnic_eswitch *eswitch;
-
-	if (adapter->op_mode != QLCNIC_MGMT_FUNC)
-		return err;
-
-	eswitch = &adapter->eswitch[id];
-	if (!eswitch)
-		return err;
-
-	arg1 = eswitch->port | (enable ? BIT_4 : 0);
-	arg2 = eswitch->active_vports | (eswitch->max_ucast_filters << 8) |
-		(eswitch->max_active_vlans << 16);
-	err = qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
-			adapter->fw_hal_version,
-			arg1,
-			arg2,
-			0,
-			QLCNIC_CDRP_CMD_TOGGLE_ESWITCH);
-
-	if (err != QLCNIC_RCODE_SUCCESS) {
-		dev_err(&adapter->pdev->dev,
-			"Failed to enable eswitch%d\n", eswitch->port);
-		eswitch->flags &= ~QLCNIC_SWITCH_ENABLE;
-		err = -EIO;
-	} else {
-		eswitch->flags |= QLCNIC_SWITCH_ENABLE;
-		dev_info(&adapter->pdev->dev,
-			"Enabled eSwitch for port %d\n", eswitch->port);
-	}
-
-	return err;
-}
-
 /* Configure eSwitch for port mirroring */
 int qlcnic_config_port_mirroring(struct qlcnic_adapter *adapter, u8 id,
 				u8 enable_mirroring, u8 pci_func)