phy subsystem: more cleanups

- unexport symbols never used outside of home module
- remove dead code
- remove CONFIG_PHYCONTROL, make it unconditionally enabled

1 files changed, 11 insertions, 186 deletions

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 934065dd637..d3e43631b89 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -40,21 +40,9 @@
 #include <asm/uaccess.h>
 
 static void phy_timer(unsigned long data);
-
-/* Convenience function to print out the current phy status
- */
-void phy_print_status(struct phy_device *phydev)
-{
-	pr_info("%s: Link is %s", phydev->dev.bus_id,
-			phydev->link ? "Up" : "Down");
-	if (phydev->link)
-		printk(" - %d/%s", phydev->speed,
-				DUPLEX_FULL == phydev->duplex ?
-				"Full" : "Half");
-
-	printk("\n");
-}
-EXPORT_SYMBOL(phy_print_status);
+static int phy_disable_interrupts(struct phy_device *phydev);
+static void phy_sanitize_settings(struct phy_device *phydev);
+static int phy_stop_interrupts(struct phy_device *phydev);
 
 
 /* Convenience functions for reading/writing a given PHY
@@ -133,7 +121,7 @@ static inline int phy_aneg_done(struct phy_device *phydev)
  *   and to PHY_FORCING if auto-negotiation is disabled. Unless
  *   the PHY is currently HALTED.
  */
-int phy_start_aneg(struct phy_device *phydev)
+static int phy_start_aneg(struct phy_device *phydev)
 {
 	int err;
 
@@ -161,8 +149,6 @@ out_unlock:
 	spin_unlock(&phydev->lock);
 	return err;
 }
-EXPORT_SYMBOL(phy_start_aneg);
-
 
 /* A structure for mapping a particular speed and duplex
  * combination to a particular SUPPORTED and ADVERTISED value */
@@ -255,7 +241,7 @@ static inline int phy_find_valid(int idx, u32 features)
  *   duplexes.  Drop down by one in this order:  1000/FULL,
  *   1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF
  */
-void phy_sanitize_settings(struct phy_device *phydev)
+static void phy_sanitize_settings(struct phy_device *phydev)
 {
 	u32 features = phydev->supported;
 	int idx;
@@ -270,7 +256,6 @@ void phy_sanitize_settings(struct phy_device *phydev)
 	phydev->speed = settings[idx].speed;
 	phydev->duplex = settings[idx].duplex;
 }
-EXPORT_SYMBOL(phy_sanitize_settings);
 
 /* phy_force_reduction
  *
@@ -477,48 +462,22 @@ void phy_error(struct phy_device *phydev)
 	spin_unlock(&phydev->lock);
 }
 
-#ifdef CONFIG_PHYCONTROL
-
-static void phy_change(void *data);
-
-/* phy_interrupt
- *
- * description: When a PHY interrupt occurs, the handler disables
- * interrupts, and schedules a work task to clear the interrupt.
- */
-static irqreturn_t phy_interrupt(int irq, void *phy_dat, struct pt_regs *regs)
-{
-	struct phy_device *phydev = phy_dat;
-
-	/* The MDIO bus is not allowed to be written in interrupt
-	 * context, so we need to disable the irq here.  A work
-	 * queue will write the PHY to disable and clear the
-	 * interrupt, and then reenable the irq line. */
-	disable_irq_nosync(irq);
-
-	schedule_work(&phydev->phy_queue);
-
-	return IRQ_HANDLED;
-}
-
-/* Enable the interrupts from the PHY side */
-int phy_enable_interrupts(struct phy_device *phydev)
+static int phy_stop_interrupts(struct phy_device *phydev)
 {
 	int err;
 
-	err = phy_clear_interrupt(phydev);
+	err = phy_disable_interrupts(phydev);
 
-	if (err < 0)
-		return err;
+	if (err)
+		phy_error(phydev);
 
-	err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
+	free_irq(phydev->irq, phydev);
 
 	return err;
 }
-EXPORT_SYMBOL(phy_enable_interrupts);
 
 /* Disable the PHY interrupts from the PHY side */
-int phy_disable_interrupts(struct phy_device *phydev)
+static int phy_disable_interrupts(struct phy_device *phydev)
 {
 	int err;
 
@@ -541,140 +500,6 @@ phy_err:
 
 	return err;
 }
-EXPORT_SYMBOL(phy_disable_interrupts);
-
-/* phy_start_interrupts
- *
- * description: Request the interrupt for the given PHY.  If
- *   this fails, then we set irq to PHY_POLL.
- *   Otherwise, we enable the interrupts in the PHY.
- *   Returns 0 on success.
- *   This should only be called with a valid IRQ number.
- */
-int phy_start_interrupts(struct phy_device *phydev)
-{
-	int err = 0;
-
-	INIT_WORK(&phydev->phy_queue, phy_change, phydev);
-
-	if (request_irq(phydev->irq, phy_interrupt,
-				SA_SHIRQ,
-				"phy_interrupt",
-				phydev) < 0) {
-		printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n",
-				phydev->bus->name,
-				phydev->irq);
-		phydev->irq = PHY_POLL;
-		return 0;
-	}
-
-	err = phy_enable_interrupts(phydev);
-
-	return err;
-}
-EXPORT_SYMBOL(phy_start_interrupts);
-
-int phy_stop_interrupts(struct phy_device *phydev)
-{
-	int err;
-
-	err = phy_disable_interrupts(phydev);
-
-	if (err)
-		phy_error(phydev);
-
-	free_irq(phydev->irq, phydev);
-
-	return err;
-}
-EXPORT_SYMBOL(phy_stop_interrupts);
-
-
-/* Scheduled by the phy_interrupt/timer to handle PHY changes */
-static void phy_change(void *data)
-{
-	int err;
-	struct phy_device *phydev = data;
-
-	err = phy_disable_interrupts(phydev);
-
-	if (err)
-		goto phy_err;
-
-	spin_lock(&phydev->lock);
-	if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
-		phydev->state = PHY_CHANGELINK;
-	spin_unlock(&phydev->lock);
-
-	enable_irq(phydev->irq);
-
-	/* Reenable interrupts */
-	err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
-
-	if (err)
-		goto irq_enable_err;
-
-	return;
-
-irq_enable_err:
-	disable_irq(phydev->irq);
-phy_err:
-	phy_error(phydev);
-}
-
-/* Bring down the PHY link, and stop checking the status. */
-void phy_stop(struct phy_device *phydev)
-{
-	spin_lock(&phydev->lock);
-
-	if (PHY_HALTED == phydev->state)
-		goto out_unlock;
-
-	if (phydev->irq != PHY_POLL) {
-		/* Clear any pending interrupts */
-		phy_clear_interrupt(phydev);
-
-		/* Disable PHY Interrupts */
-		phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
-	}
-
-	phydev->state = PHY_HALTED;
-
-out_unlock:
-	spin_unlock(&phydev->lock);
-}
-
-
-/* phy_start
- *
- * description: Indicates the attached device's readiness to
- *   handle PHY-related work.  Used during startup to start the
- *   PHY, and after a call to phy_stop() to resume operation.
- *   Also used to indicate the MDIO bus has cleared an error
- *   condition.
- */
-void phy_start(struct phy_device *phydev)
-{
-	spin_lock(&phydev->lock);
-
-	switch (phydev->state) {
-		case PHY_STARTING:
-			phydev->state = PHY_PENDING;
-			break;
-		case PHY_READY:
-			phydev->state = PHY_UP;
-			break;
-		case PHY_HALTED:
-			phydev->state = PHY_RESUMING;
-		default:
-			break;
-	}
-	spin_unlock(&phydev->lock);
-}
-EXPORT_SYMBOL(phy_stop);
-EXPORT_SYMBOL(phy_start);
-
-#endif /* CONFIG_PHYCONTROL */
 
 /* PHY timer which handles the state machine */
 static void phy_timer(unsigned long data)