ni5010: Move the Racal-Interlan (Micom) driver

Moves the Racal-Interlan driver into drivers/net/ethernet/racal/ and
make the necessary Kconfig and Makefile changes.

CC: "Jan-Pascal van Best" <janpascal@vanbest.org>
CC: Andreas Mohr <andi@lisas.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 771 deletions

diff --git a/drivers/net/ni5010.c b/drivers/net/ni5010.c
deleted file mode 100644
index 4d3f2e2b28b..00000000000
--- a/drivers/net/ni5010.c
+++ /dev/null
@@ -1,771 +0,0 @@
-/*	ni5010.c: A network driver for the MiCom-Interlan NI5010 ethercard.
- *
- *	Copyright 1996,1997,2006 Jan-Pascal van Best and Andreas Mohr.
- *
- *	This software may be used and distributed according to the terms
- *	of the GNU General Public License, incorporated herein by reference.
- *
- * 	The authors may be reached as:
- *		janpascal@vanbest.org		andi@lisas.de
- *
- *	Sources:
- * 	 	Donald Becker's "skeleton.c"
- *  		Crynwr ni5010 packet driver
- *
- *	Changes:
- *		v0.0: First test version
- *		v0.1: First working version
- *		v0.2:
- *		v0.3->v0.90: Now demand setting io and irq when loading as module
- *	970430	v0.91: modified for Linux 2.1.14
- *		v0.92: Implemented Andreas' (better) NI5010 probe
- *	970503	v0.93: Fixed auto-irq failure on warm reboot (JB)
- *	970623	v1.00: First kernel version (AM)
- *	970814	v1.01: Added detection of onboard receive buffer size (AM)
- *	060611	v1.02: slight cleanup: email addresses, driver modernization.
- *	Bugs:
- *		- not SMP-safe (no locking of I/O accesses)
- *		- Note that you have to patch ifconfig for the new /proc/net/dev
- *		format. It gives incorrect stats otherwise.
- *
- *	To do:
- *		Fix all bugs :-)
- *		Move some stuff to chipset_init()
- *		Handle xmt errors other than collisions
- *		Complete merge with Andreas' driver
- *		Implement ring buffers (Is this useful? You can't squeeze
- *			too many packet in a 2k buffer!)
- *		Implement DMA (Again, is this useful? Some docs say DMA is
- *			slower than programmed I/O)
- *
- *	Compile with:
- *		gcc -O2 -fomit-frame-pointer -m486 -D__KERNEL__ \
- *			-DMODULE -c ni5010.c
- *
- *	Insert with e.g.:
- *		insmod ni5010.ko io=0x300 irq=5
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include "ni5010.h"
-
-static const char boardname[] = "NI5010";
-static char version[] __initdata =
-	"ni5010.c: v1.02 20060611 Jan-Pascal van Best and Andreas Mohr\n";
-
-/* bufsize_rcv == 0 means autoprobing */
-static unsigned int bufsize_rcv;
-
-#define JUMPERED_INTERRUPTS	/* IRQ line jumpered on board */
-#undef JUMPERED_DMA		/* No DMA used */
-#undef FULL_IODETECT		/* Only detect in portlist */
-
-#ifndef FULL_IODETECT
-/* A zero-terminated list of I/O addresses to be probed. */
-static unsigned int ports[] __initdata =
-	{ 0x300, 0x320, 0x340, 0x360, 0x380, 0x3a0, 0 };
-#endif
-
-/* Use 0 for production, 1 for verification, >2 for debug */
-#ifndef NI5010_DEBUG
-#define NI5010_DEBUG 0
-#endif
-
-/* Information that needs to be kept for each board. */
-struct ni5010_local {
-	int o_pkt_size;
-	spinlock_t lock;
-};
-
-/* Index to functions, as function prototypes. */
-
-static int	ni5010_probe1(struct net_device *dev, int ioaddr);
-static int	ni5010_open(struct net_device *dev);
-static int	ni5010_send_packet(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t ni5010_interrupt(int irq, void *dev_id);
-static void	ni5010_rx(struct net_device *dev);
-static void	ni5010_timeout(struct net_device *dev);
-static int	ni5010_close(struct net_device *dev);
-static void 	ni5010_set_multicast_list(struct net_device *dev);
-static void	reset_receiver(struct net_device *dev);
-
-static int	process_xmt_interrupt(struct net_device *dev);
-#define tx_done(dev) 1
-static void	hardware_send_packet(struct net_device *dev, char *buf, int length, int pad);
-static void 	chipset_init(struct net_device *dev, int startp);
-static void	dump_packet(void *buf, int len);
-static void 	ni5010_show_registers(struct net_device *dev);
-
-static int io;
-static int irq;
-
-struct net_device * __init ni5010_probe(int unit)
-{
-	struct net_device *dev = alloc_etherdev(sizeof(struct ni5010_local));
-	int *port;
-	int err = 0;
-
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	if (unit >= 0) {
-		sprintf(dev->name, "eth%d", unit);
-		netdev_boot_setup_check(dev);
-		io = dev->base_addr;
-		irq = dev->irq;
-	}
-
-	PRINTK2((KERN_DEBUG "%s: Entering ni5010_probe\n", dev->name));
-
-	if (io > 0x1ff)	{	/* Check a single specified location. */
-		err = ni5010_probe1(dev, io);
-	} else if (io != 0) {	/* Don't probe at all. */
-		err = -ENXIO;
-	} else {
-#ifdef FULL_IODETECT
-		for (io=0x200; io<0x400 && ni5010_probe1(dev, io) ; io+=0x20)
-			;
-		if (io == 0x400)
-			err = -ENODEV;
-
-#else
-		for (port = ports; *port && ni5010_probe1(dev, *port); port++)
-			;
-		if (!*port)
-			err = -ENODEV;
-#endif	/* FULL_IODETECT */
-	}
-	if (err)
-		goto out;
-	err = register_netdev(dev);
-	if (err)
-		goto out1;
-	return dev;
-out1:
-	release_region(dev->base_addr, NI5010_IO_EXTENT);
-out:
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-
-static inline int rd_port(int ioaddr)
-{
-	inb(IE_RBUF);
-	return inb(IE_SAPROM);
-}
-
-static void __init trigger_irq(int ioaddr)
-{
-		outb(0x00, EDLC_RESET);	/* Clear EDLC hold RESET state */
-		outb(0x00, IE_RESET);	/* Board reset */
-		outb(0x00, EDLC_XMASK);	/* Disable all Xmt interrupts */
-		outb(0x00, EDLC_RMASK); /* Disable all Rcv interrupt */
-		outb(0xff, EDLC_XCLR);	/* Clear all pending Xmt interrupts */
-		outb(0xff, EDLC_RCLR);	/* Clear all pending Rcv interrupts */
-		/*
-		 * Transmit packet mode: Ignore parity, Power xcvr,
-		 * 	Enable loopback
-		 */
-		outb(XMD_IG_PAR | XMD_T_MODE | XMD_LBC, EDLC_XMODE);
-		outb(RMD_BROADCAST, EDLC_RMODE); /* Receive normal&broadcast */
-		outb(XM_ALL, EDLC_XMASK);	/* Enable all Xmt interrupts */
-		udelay(50);			/* FIXME: Necessary? */
-		outb(MM_EN_XMT|MM_MUX, IE_MMODE); /* Start transmission */
-}
-
-static const struct net_device_ops ni5010_netdev_ops = {
-	.ndo_open		= ni5010_open,
-	.ndo_stop		= ni5010_close,
-	.ndo_start_xmit		= ni5010_send_packet,
-	.ndo_set_multicast_list	= ni5010_set_multicast_list,
-	.ndo_tx_timeout		= ni5010_timeout,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_mac_addr,
-	.ndo_change_mtu		= eth_change_mtu,
-};
-
-/*
- *      This is the real probe routine.  Linux has a history of friendly device
- *      probes on the ISA bus.  A good device probes avoids doing writes, and
- *      verifies that the correct device exists and functions.
- */
-
-static int __init ni5010_probe1(struct net_device *dev, int ioaddr)
-{
-	static unsigned version_printed;
-	struct ni5010_local *lp;
-	int i;
-	unsigned int data = 0;
-	int boguscount = 40;
-	int err = -ENODEV;
-
-	dev->base_addr = ioaddr;
-	dev->irq = irq;
-
-	if (!request_region(ioaddr, NI5010_IO_EXTENT, boardname))
-		return -EBUSY;
-
-	/*
-	 * This is no "official" probe method, I've rather tested which
-	 * probe works best with my seven NI5010 cards
-	 * (they have very different serial numbers)
-	 * Suggestions or failure reports are very, very welcome !
-	 * But I think it is a relatively good probe method
-	 * since it doesn't use any "outb"
-	 * It should be nearly 100% reliable !
-	 * well-known WARNING: this probe method (like many others)
-	 * will hang the system if a NE2000 card region is probed !
-	 *
-	 *   - Andreas
-	 */
-
- 	PRINTK2((KERN_DEBUG "%s: entering ni5010_probe1(%#3x)\n",
- 		dev->name, ioaddr));
-
-	if (inb(ioaddr+0) == 0xff)
-		goto out;
-
-	while ( (rd_port(ioaddr) & rd_port(ioaddr) & rd_port(ioaddr) &
-		 rd_port(ioaddr) & rd_port(ioaddr) & rd_port(ioaddr)) != 0xff)
-	{
-		if (boguscount-- == 0)
-			goto out;
-	}
-
-	PRINTK2((KERN_DEBUG "%s: I/O #1 passed!\n", dev->name));
-
-	for (i=0; i<32; i++)
-		if ( (data = rd_port(ioaddr)) != 0xff) break;
-	if (data==0xff)
-		goto out;
-
-	PRINTK2((KERN_DEBUG "%s: I/O #2 passed!\n", dev->name));
-
-	if ((data != SA_ADDR0) || (rd_port(ioaddr) != SA_ADDR1) ||
-	    (rd_port(ioaddr) != SA_ADDR2))
-		goto out;
-
-	for (i=0; i<4; i++)
-		rd_port(ioaddr);
-
-	if ( (rd_port(ioaddr) != NI5010_MAGICVAL1) ||
-	     (rd_port(ioaddr) != NI5010_MAGICVAL2) )
-		goto out;
-
-	PRINTK2((KERN_DEBUG "%s: I/O #3 passed!\n", dev->name));
-
-	if (NI5010_DEBUG && version_printed++ == 0)
-		printk(KERN_INFO "%s", version);
-
-	printk("NI5010 ethercard probe at 0x%x: ", ioaddr);
-
-	dev->base_addr = ioaddr;
-
-	for (i=0; i<6; i++) {
-		outw(i, IE_GP);
-		dev->dev_addr[i] = inb(IE_SAPROM);
-	}
-	printk("%pM ", dev->dev_addr);
-
-	PRINTK2((KERN_DEBUG "%s: I/O #4 passed!\n", dev->name));
-
-#ifdef JUMPERED_INTERRUPTS
-	if (dev->irq == 0xff)
-		;
-	else if (dev->irq < 2) {
-		unsigned long irq_mask;
-
-		PRINTK2((KERN_DEBUG "%s: I/O #5 passed!\n", dev->name));
-
-		irq_mask = probe_irq_on();
-		trigger_irq(ioaddr);
-		mdelay(20);
-		dev->irq = probe_irq_off(irq_mask);
-
-		PRINTK2((KERN_DEBUG "%s: I/O #6 passed!\n", dev->name));
-
-		if (dev->irq == 0) {
-			err = -EAGAIN;
-			printk(KERN_WARNING "%s: no IRQ found!\n", dev->name);
-			goto out;
-		}
-		PRINTK2((KERN_DEBUG "%s: I/O #7 passed!\n", dev->name));
-	} else if (dev->irq == 2) {
-		dev->irq = 9;
-	}
-#endif	/* JUMPERED_INTERRUPTS */
-	PRINTK2((KERN_DEBUG "%s: I/O #9 passed!\n", dev->name));
-
-	/* DMA is not supported (yet?), so no use detecting it */
-	lp = netdev_priv(dev);
-
-	spin_lock_init(&lp->lock);
-
-	PRINTK2((KERN_DEBUG "%s: I/O #10 passed!\n", dev->name));
-
-/* get the size of the onboard receive buffer
- * higher addresses than bufsize are wrapped into real buffer
- * i.e. data for offs. 0x801 is written to 0x1 with a 2K onboard buffer
- */
-	if (!bufsize_rcv) {
-        	outb(1, IE_MMODE);      /* Put Rcv buffer on system bus */
-        	outw(0, IE_GP);		/* Point GP at start of packet */
-        	outb(0, IE_RBUF);	/* set buffer byte 0 to 0 */
-        	for (i = 1; i < 0xff; i++) {
-                	outw(i << 8, IE_GP); /* Point GP at packet size to be tested */
-                	outb(i, IE_RBUF);
-                	outw(0x0, IE_GP); /* Point GP at start of packet */
-                	data = inb(IE_RBUF);
-                	if (data == i) break;
-        	}
-		bufsize_rcv = i << 8;
-        	outw(0, IE_GP);		/* Point GP at start of packet */
-        	outb(0, IE_RBUF);	/* set buffer byte 0 to 0 again */
-	}
-        printk("-> bufsize rcv/xmt=%d/%d\n", bufsize_rcv, NI5010_BUFSIZE);
-
-	dev->netdev_ops		= &ni5010_netdev_ops;
-	dev->watchdog_timeo	= HZ/20;
-
-	dev->flags &= ~IFF_MULTICAST;	/* Multicast doesn't work */
-
-	/* Shut up the ni5010 */
-	outb(0, EDLC_RMASK);	/* Mask all receive interrupts */
-	outb(0, EDLC_XMASK);	/* Mask all xmit interrupts */
-	outb(0xff, EDLC_RCLR);	/* Kill all pending rcv interrupts */
-	outb(0xff, EDLC_XCLR); 	/* Kill all pending xmt interrupts */
-
-	printk(KERN_INFO "%s: NI5010 found at 0x%x, using IRQ %d", dev->name, ioaddr, dev->irq);
-	if (dev->dma)
-		printk(" & DMA %d", dev->dma);
-	printk(".\n");
-	return 0;
-out:
-	release_region(dev->base_addr, NI5010_IO_EXTENT);
-	return err;
-}
-
-/*
- * Open/initialize the board.  This is called (in the current kernel)
- * sometime after booting when the 'ifconfig' program is run.
- *
- * This routine should set everything up anew at each open, even
- * registers that "should" only need to be set once at boot, so that
- * there is a non-reboot way to recover if something goes wrong.
- */
-
-static int ni5010_open(struct net_device *dev)
-{
-	int ioaddr = dev->base_addr;
-	int i;
-
-	PRINTK2((KERN_DEBUG "%s: entering ni5010_open()\n", dev->name));
-
-	if (request_irq(dev->irq, ni5010_interrupt, 0, boardname, dev)) {
-		printk(KERN_WARNING "%s: Cannot get irq %#2x\n", dev->name, dev->irq);
-		return -EAGAIN;
-	}
-	PRINTK3((KERN_DEBUG "%s: passed open() #1\n", dev->name));
-        /*
-         * Always allocate the DMA channel after the IRQ,
-         * and clean up on failure.
-         */
-#ifdef JUMPERED_DMA
-        if (request_dma(dev->dma, cardname)) {
-		printk(KERN_WARNING "%s: Cannot get dma %#2x\n", dev->name, dev->dma);
-                free_irq(dev->irq, NULL);
-                return -EAGAIN;
-        }
-#endif	/* JUMPERED_DMA */
-
-	PRINTK3((KERN_DEBUG "%s: passed open() #2\n", dev->name));
-	/* Reset the hardware here.  Don't forget to set the station address. */
-
-	outb(RS_RESET, EDLC_RESET);	/* Hold up EDLC_RESET while configing board */
-	outb(0, IE_RESET);		/* Hardware reset of ni5010 board */
-	outb(XMD_LBC, EDLC_XMODE);	/* Only loopback xmits */
-
-	PRINTK3((KERN_DEBUG "%s: passed open() #3\n", dev->name));
-	/* Set the station address */
-	for(i = 0;i < 6; i++) {
-		outb(dev->dev_addr[i], EDLC_ADDR + i);
-	}
-
-	PRINTK3((KERN_DEBUG "%s: Initialising ni5010\n", dev->name));
-	outb(0, EDLC_XMASK);	/* No xmit interrupts for now */
-	outb(XMD_IG_PAR | XMD_T_MODE | XMD_LBC, EDLC_XMODE);
-				/* Normal packet xmit mode */
-	outb(0xff, EDLC_XCLR);	/* Clear all pending xmit interrupts */
-	outb(RMD_BROADCAST, EDLC_RMODE);
-				/* Receive broadcast and normal packets */
-	reset_receiver(dev);	/* Ready ni5010 for receiving packets */
-
-	outb(0, EDLC_RESET);	/* Un-reset the ni5010 */
-
-	netif_start_queue(dev);
-
-	if (NI5010_DEBUG) ni5010_show_registers(dev);
-
-	PRINTK((KERN_DEBUG "%s: open successful\n", dev->name));
-     	return 0;
-}
-
-static void reset_receiver(struct net_device *dev)
-{
-	int ioaddr = dev->base_addr;
-
-	PRINTK3((KERN_DEBUG "%s: resetting receiver\n", dev->name));
-	outw(0, IE_GP);		/* Receive packet at start of buffer */
-	outb(0xff, EDLC_RCLR);	/* Clear all pending rcv interrupts */
-	outb(0, IE_MMODE);	/* Put EDLC to rcv buffer */
-	outb(MM_EN_RCV, IE_MMODE); /* Enable rcv */
-	outb(0xff, EDLC_RMASK);	/* Enable all rcv interrupts */
-}
-
-static void ni5010_timeout(struct net_device *dev)
-{
-	printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
-		   tx_done(dev) ? "IRQ conflict" : "network cable problem");
-	/* Try to restart the adaptor. */
-	/* FIXME: Give it a real kick here */
-	chipset_init(dev, 1);
-	dev->trans_start = jiffies; /* prevent tx timeout */
-	netif_wake_queue(dev);
-}
-
-static int ni5010_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
-	int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
-
-	PRINTK2((KERN_DEBUG "%s: entering ni5010_send_packet\n", dev->name));
-
-	/*
-         * Block sending
-	 */
-
-	netif_stop_queue(dev);
-	hardware_send_packet(dev, (unsigned char *)skb->data, skb->len, length-skb->len);
-	dev_kfree_skb (skb);
-	return NETDEV_TX_OK;
-}
-
-/*
- * The typical workload of the driver:
- * Handle the network interface interrupts.
- */
-static irqreturn_t ni5010_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct ni5010_local *lp;
-	int ioaddr, status;
-	int xmit_was_error = 0;
-
-	PRINTK2((KERN_DEBUG "%s: entering ni5010_interrupt\n", dev->name));
-
-	ioaddr = dev->base_addr;
-	lp = netdev_priv(dev);
-
-	spin_lock(&lp->lock);
-	status = inb(IE_ISTAT);
-	PRINTK3((KERN_DEBUG "%s: IE_ISTAT = %#02x\n", dev->name, status));
-
-        if ((status & IS_R_INT) == 0) ni5010_rx(dev);
-
-        if ((status & IS_X_INT) == 0) {
-                xmit_was_error = process_xmt_interrupt(dev);
-        }
-
-        if ((status & IS_DMA_INT) == 0) {
-                PRINTK((KERN_DEBUG "%s: DMA complete (?)\n", dev->name));
-                outb(0, IE_DMA_RST); /* Reset DMA int */
-        }
-
-	if (!xmit_was_error)
-		reset_receiver(dev);
-	spin_unlock(&lp->lock);
-	return IRQ_HANDLED;
-}
-
-
-static void dump_packet(void *buf, int len)
-{
-	int i;
-
-	printk(KERN_DEBUG "Packet length = %#4x\n", len);
-	for (i = 0; i < len; i++){
-		if (i % 16 == 0) printk(KERN_DEBUG "%#4.4x", i);
-		if (i % 2 == 0) printk(" ");
-		printk("%2.2x", ((unsigned char *)buf)[i]);
-		if (i % 16 == 15) printk("\n");
-	}
-	printk("\n");
-}
-
-/* We have a good packet, get it out of the buffer. */
-static void ni5010_rx(struct net_device *dev)
-{
-	int ioaddr = dev->base_addr;
-	unsigned char rcv_stat;
-	struct sk_buff *skb;
-	int i_pkt_size;
-
-	PRINTK2((KERN_DEBUG "%s: entering ni5010_rx()\n", dev->name));
-
-	rcv_stat = inb(EDLC_RSTAT);
-	PRINTK3((KERN_DEBUG "%s: EDLC_RSTAT = %#2x\n", dev->name, rcv_stat));
-
-	if ( (rcv_stat & RS_VALID_BITS) != RS_PKT_OK) {
-		PRINTK((KERN_INFO "%s: receive error.\n", dev->name));
-		dev->stats.rx_errors++;
-		if (rcv_stat & RS_RUNT) dev->stats.rx_length_errors++;
-		if (rcv_stat & RS_ALIGN) dev->stats.rx_frame_errors++;
-		if (rcv_stat & RS_CRC_ERR) dev->stats.rx_crc_errors++;
-		if (rcv_stat & RS_OFLW) dev->stats.rx_fifo_errors++;
-        	outb(0xff, EDLC_RCLR); /* Clear the interrupt */
-		return;
-	}
-
-        outb(0xff, EDLC_RCLR);  /* Clear the interrupt */
-
-	i_pkt_size = inw(IE_RCNT);
-	if (i_pkt_size > ETH_FRAME_LEN || i_pkt_size < 10 ) {
-		PRINTK((KERN_DEBUG "%s: Packet size error, packet size = %#4.4x\n",
-			dev->name, i_pkt_size));
-		dev->stats.rx_errors++;
-		dev->stats.rx_length_errors++;
-		return;
-	}
-
-	/* Malloc up new buffer. */
-	skb = dev_alloc_skb(i_pkt_size + 3);
-	if (skb == NULL) {
-		printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name);
-		dev->stats.rx_dropped++;
-		return;
-	}
-
-	skb_reserve(skb, 2);
-
-	/* Read packet into buffer */
-        outb(MM_MUX, IE_MMODE); /* Rcv buffer to system bus */
-	outw(0, IE_GP);	/* Seek to beginning of packet */
-	insb(IE_RBUF, skb_put(skb, i_pkt_size), i_pkt_size);
-
-	if (NI5010_DEBUG >= 4)
-		dump_packet(skb->data, skb->len);
-
-	skb->protocol = eth_type_trans(skb,dev);
-	netif_rx(skb);
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += i_pkt_size;
-
-	PRINTK2((KERN_DEBUG "%s: Received packet, size=%#4.4x\n",
-		dev->name, i_pkt_size));
-}
-
-static int process_xmt_interrupt(struct net_device *dev)
-{
-	struct ni5010_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-	int xmit_stat;
-
-	PRINTK2((KERN_DEBUG "%s: entering process_xmt_interrupt\n", dev->name));
-
-	xmit_stat = inb(EDLC_XSTAT);
-	PRINTK3((KERN_DEBUG "%s: EDLC_XSTAT = %2.2x\n", dev->name, xmit_stat));
-
-	outb(0, EDLC_XMASK);	/* Disable xmit IRQ's */
-	outb(0xff, EDLC_XCLR);	/* Clear all pending xmit IRQ's */
-
-	if (xmit_stat & XS_COLL){
-		PRINTK((KERN_DEBUG "%s: collision detected, retransmitting\n",
-			dev->name));
-		outw(NI5010_BUFSIZE - lp->o_pkt_size, IE_GP);
-		/* outb(0, IE_MMODE); */ /* xmt buf on sysbus FIXME: needed ? */
-		outb(MM_EN_XMT | MM_MUX, IE_MMODE);
-		outb(XM_ALL, EDLC_XMASK); /* Enable xmt IRQ's */
-		dev->stats.collisions++;
-		return 1;
-	}
-
-	/* FIXME: handle other xmt error conditions */
-
-	dev->stats.tx_packets++;
-	dev->stats.tx_bytes += lp->o_pkt_size;
-	netif_wake_queue(dev);
-
-	PRINTK2((KERN_DEBUG "%s: sent packet, size=%#4.4x\n",
-		dev->name, lp->o_pkt_size));
-
-	return 0;
-}
-
-/* The inverse routine to ni5010_open(). */
-static int ni5010_close(struct net_device *dev)
-{
-	int ioaddr = dev->base_addr;
-
-	PRINTK2((KERN_DEBUG "%s: entering ni5010_close\n", dev->name));
-#ifdef JUMPERED_INTERRUPTS
-	free_irq(dev->irq, NULL);
-#endif
-	/* Put card in held-RESET state */
-	outb(0, IE_MMODE);
-	outb(RS_RESET, EDLC_RESET);
-
-	netif_stop_queue(dev);
-
-	PRINTK((KERN_DEBUG "%s: %s closed down\n", dev->name, boardname));
-	return 0;
-
-}
-
-/* Set or clear the multicast filter for this adaptor.
-   num_addrs == -1      Promiscuous mode, receive all packets
-   num_addrs == 0       Normal mode, clear multicast list
-   num_addrs > 0        Multicast mode, receive normal and MC packets, and do
-                        best-effort filtering.
-*/
-static void ni5010_set_multicast_list(struct net_device *dev)
-{
-	short ioaddr = dev->base_addr;
-
-	PRINTK2((KERN_DEBUG "%s: entering set_multicast_list\n", dev->name));
-
-	if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
-	    !netdev_mc_empty(dev)) {
-		outb(RMD_PROMISC, EDLC_RMODE); /* Enable promiscuous mode */
-		PRINTK((KERN_DEBUG "%s: Entering promiscuous mode\n", dev->name));
-	} else {
-		PRINTK((KERN_DEBUG "%s: Entering broadcast mode\n", dev->name));
-		outb(RMD_BROADCAST, EDLC_RMODE);  /* Disable promiscuous mode, use normal mode */
-	}
-}
-
-static void hardware_send_packet(struct net_device *dev, char *buf, int length, int pad)
-{
-	struct ni5010_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-	unsigned long flags;
-	unsigned int buf_offs;
-
-	PRINTK2((KERN_DEBUG "%s: entering hardware_send_packet\n", dev->name));
-
-        if (length > ETH_FRAME_LEN) {
-                PRINTK((KERN_WARNING "%s: packet too large, not possible\n",
-                        dev->name));
-                return;
-        }
-
-	if (NI5010_DEBUG) ni5010_show_registers(dev);
-
-	if (inb(IE_ISTAT) & IS_EN_XMT) {
-		PRINTK((KERN_WARNING "%s: sending packet while already transmitting, not possible\n",
-			dev->name));
-		return;
-	}
-
-	if (NI5010_DEBUG > 3) dump_packet(buf, length);
-
-	buf_offs = NI5010_BUFSIZE - length - pad;
-
-	spin_lock_irqsave(&lp->lock, flags);
-	lp->o_pkt_size = length + pad;
-
-	outb(0, EDLC_RMASK);	/* Mask all receive interrupts */
-	outb(0, IE_MMODE);	/* Put Xmit buffer on system bus */
-	outb(0xff, EDLC_RCLR);	/* Clear out pending rcv interrupts */
-
-	outw(buf_offs, IE_GP); /* Point GP at start of packet */
-	outsb(IE_XBUF, buf, length); /* Put data in buffer */
-	while(pad--)
-		outb(0, IE_XBUF);
-
-	outw(buf_offs, IE_GP); /* Rewrite where packet starts */
-
-	/* should work without that outb() (Crynwr used it) */
-	/*outb(MM_MUX, IE_MMODE);*/ /* Xmt buffer to EDLC bus */
-	outb(MM_EN_XMT | MM_MUX, IE_MMODE); /* Begin transmission */
-	outb(XM_ALL, EDLC_XMASK); /* Cause interrupt after completion or fail */
-
-	spin_unlock_irqrestore(&lp->lock, flags);
-
-	netif_wake_queue(dev);
-
-	if (NI5010_DEBUG) ni5010_show_registers(dev);
-}
-
-static void chipset_init(struct net_device *dev, int startp)
-{
-	/* FIXME: Move some stuff here */
-	PRINTK3((KERN_DEBUG "%s: doing NOTHING in chipset_init\n", dev->name));
-}
-
-static void ni5010_show_registers(struct net_device *dev)
-{
-	int ioaddr = dev->base_addr;
-
-	PRINTK3((KERN_DEBUG "%s: XSTAT %#2.2x\n", dev->name, inb(EDLC_XSTAT)));
-	PRINTK3((KERN_DEBUG "%s: XMASK %#2.2x\n", dev->name, inb(EDLC_XMASK)));
-	PRINTK3((KERN_DEBUG "%s: RSTAT %#2.2x\n", dev->name, inb(EDLC_RSTAT)));
-	PRINTK3((KERN_DEBUG "%s: RMASK %#2.2x\n", dev->name, inb(EDLC_RMASK)));
-	PRINTK3((KERN_DEBUG "%s: RMODE %#2.2x\n", dev->name, inb(EDLC_RMODE)));
-	PRINTK3((KERN_DEBUG "%s: XMODE %#2.2x\n", dev->name, inb(EDLC_XMODE)));
-	PRINTK3((KERN_DEBUG "%s: ISTAT %#2.2x\n", dev->name, inb(IE_ISTAT)));
-}
-
-#ifdef MODULE
-static struct net_device *dev_ni5010;
-
-module_param(io, int, 0);
-module_param(irq, int, 0);
-MODULE_PARM_DESC(io, "ni5010 I/O base address");
-MODULE_PARM_DESC(irq, "ni5010 IRQ number");
-
-static int __init ni5010_init_module(void)
-{
-	PRINTK2((KERN_DEBUG "%s: entering init_module\n", boardname));
-	/*
-	if(io <= 0 || irq == 0){
-	   	printk(KERN_WARNING "%s: Autoprobing not allowed for modules.\n", boardname);
-		printk(KERN_WARNING "%s: Set symbols 'io' and 'irq'\n", boardname);
-	   	return -EINVAL;
-	}
-	*/
-	if (io <= 0){
-		printk(KERN_WARNING "%s: Autoprobing for modules is hazardous, trying anyway..\n", boardname);
-	}
-
-	PRINTK2((KERN_DEBUG "%s: init_module irq=%#2x, io=%#3x\n", boardname, irq, io));
-	dev_ni5010 = ni5010_probe(-1);
-	if (IS_ERR(dev_ni5010))
-		return PTR_ERR(dev_ni5010);
-        return 0;
-}
-
-static void __exit ni5010_cleanup_module(void)
-{
-	PRINTK2((KERN_DEBUG "%s: entering cleanup_module\n", boardname));
-	unregister_netdev(dev_ni5010);
-	release_region(dev_ni5010->base_addr, NI5010_IO_EXTENT);
-	free_netdev(dev_ni5010);
-}
-module_init(ni5010_init_module);
-module_exit(ni5010_cleanup_module);
-#endif /* MODULE */
-MODULE_LICENSE("GPL");