bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers

Move the Apple drivers into driver/net/ethernet/apple/ and make the
necessary Kconfig and Makefile changes.

CC: Paul Mackerras <paulus@samba.org>
CC: Paul Mackerras <paulus@au.ibm.com>
CC: Russell Nelson <nelson@crynwr.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 634 deletions

diff --git a/drivers/net/mac89x0.c b/drivers/net/mac89x0.c
deleted file mode 100644
index 669b317974a..00000000000
--- a/drivers/net/mac89x0.c
+++ /dev/null
@@ -1,634 +0,0 @@
-/* mac89x0.c: A Crystal Semiconductor CS89[02]0 driver for linux. */
-/*
-	Written 1996 by Russell Nelson, with reference to skeleton.c
-	written 1993-1994 by Donald Becker.
-
-	This software may be used and distributed according to the terms
-	of the GNU General Public License, incorporated herein by reference.
-
-	The author may be reached at nelson@crynwr.com, Crynwr
-	Software, 11 Grant St., Potsdam, NY 13676
-
-  Changelog:
-
-  Mike Cruse        : mcruse@cti-ltd.com
-                    : Changes for Linux 2.0 compatibility.
-                    : Added dev_id parameter in net_interrupt(),
-                    : request_irq() and free_irq(). Just NULL for now.
-
-  Mike Cruse        : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros
-                    : in net_open() and net_close() so kerneld would know
-                    : that the module is in use and wouldn't eject the
-                    : driver prematurely.
-
-  Mike Cruse        : Rewrote init_module() and cleanup_module using 8390.c
-                    : as an example. Disabled autoprobing in init_module(),
-                    : not a good thing to do to other devices while Linux
-                    : is running from all accounts.
-
-  Alan Cox          : Removed 1.2 support, added 2.1 extra counters.
-
-  David Huggins-Daines <dhd@debian.org>
-
-  Split this off into mac89x0.c, and gutted it of all parts which are
-  not relevant to the existing CS8900 cards on the Macintosh
-  (i.e. basically the Daynaport CS and LC cards).  To be precise:
-
-    * Removed all the media-detection stuff, because these cards are
-    TP-only.
-
-    * Lobotomized the ISA interrupt bogosity, because these cards use
-    a hardwired NuBus interrupt and a magic ISAIRQ value in the card.
-
-    * Basically eliminated everything not relevant to getting the
-    cards minimally functioning on the Macintosh.
-
-  I might add that these cards are badly designed even from the Mac
-  standpoint, in that Dayna, in their infinite wisdom, used NuBus slot
-  I/O space and NuBus interrupts for these cards, but neglected to
-  provide anything even remotely resembling a NuBus ROM.  Therefore we
-  have to probe for them in a brain-damaged ISA-like fashion.
-
-  Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 11/01/2001
-  check kmalloc and release the allocated memory on failure in
-  mac89x0_probe and in init_module
-  use local_irq_{save,restore}(flags) in net_get_stat, not just
-  local_irq_{dis,en}able()
-*/
-
-static char *version =
-"cs89x0.c:v1.02 11/26/96 Russell Nelson <nelson@crynwr.com>\n";
-
-/* ======================= configure the driver here ======================= */
-
-/* use 0 for production, 1 for verification, >2 for debug */
-#ifndef NET_DEBUG
-#define NET_DEBUG 0
-#endif
-
-/* ======================= end of configuration ======================= */
-
-
-/* Always include 'config.h' first in case the user wants to turn on
-   or override something. */
-#include <linux/module.h>
-
-/*
-  Sources:
-
-	Crynwr packet driver epktisa.
-
-	Crystal Semiconductor data sheets.
-
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/string.h>
-#include <linux/nubus.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-#include <linux/gfp.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/hwtest.h>
-#include <asm/macints.h>
-
-#include "cs89x0.h"
-
-static unsigned int net_debug = NET_DEBUG;
-
-/* Information that need to be kept for each board. */
-struct net_local {
-	int chip_type;		/* one of: CS8900, CS8920, CS8920M */
-	char chip_revision;	/* revision letter of the chip ('A'...) */
-	int send_cmd;		/* the propercommand used to send a packet. */
-	int rx_mode;
-	int curr_rx_cfg;
-        int send_underrun;      /* keep track of how many underruns in a row we get */
-	struct sk_buff *skb;
-};
-
-/* Index to functions, as function prototypes. */
-
-#if 0
-extern void reset_chip(struct net_device *dev);
-#endif
-static int net_open(struct net_device *dev);
-static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t net_interrupt(int irq, void *dev_id);
-static void set_multicast_list(struct net_device *dev);
-static void net_rx(struct net_device *dev);
-static int net_close(struct net_device *dev);
-static struct net_device_stats *net_get_stats(struct net_device *dev);
-static int set_mac_address(struct net_device *dev, void *addr);
-
-
-/* Example routines you must write ;->. */
-#define tx_done(dev) 1
-
-/* For reading/writing registers ISA-style */
-static inline int
-readreg_io(struct net_device *dev, int portno)
-{
-	nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
-	return swab16(nubus_readw(dev->base_addr + DATA_PORT));
-}
-
-static inline void
-writereg_io(struct net_device *dev, int portno, int value)
-{
-	nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
-	nubus_writew(swab16(value), dev->base_addr + DATA_PORT);
-}
-
-/* These are for reading/writing registers in shared memory */
-static inline int
-readreg(struct net_device *dev, int portno)
-{
-	return swab16(nubus_readw(dev->mem_start + portno));
-}
-
-static inline void
-writereg(struct net_device *dev, int portno, int value)
-{
-	nubus_writew(swab16(value), dev->mem_start + portno);
-}
-
-static const struct net_device_ops mac89x0_netdev_ops = {
-	.ndo_open		= net_open,
-	.ndo_stop		= net_close,
-	.ndo_start_xmit		= net_send_packet,
-	.ndo_get_stats		= net_get_stats,
-	.ndo_set_multicast_list	= set_multicast_list,
-	.ndo_set_mac_address	= set_mac_address,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_change_mtu		= eth_change_mtu,
-};
-
-/* Probe for the CS8900 card in slot E.  We won't bother looking
-   anywhere else until we have a really good reason to do so. */
-struct net_device * __init mac89x0_probe(int unit)
-{
-	struct net_device *dev;
-	static int once_is_enough;
-	struct net_local *lp;
-	static unsigned version_printed;
-	int i, slot;
-	unsigned rev_type = 0;
-	unsigned long ioaddr;
-	unsigned short sig;
-	int err = -ENODEV;
-
-	if (!MACH_IS_MAC)
-		return ERR_PTR(-ENODEV);
-
-	dev = alloc_etherdev(sizeof(struct net_local));
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	if (unit >= 0) {
-		sprintf(dev->name, "eth%d", unit);
-		netdev_boot_setup_check(dev);
-	}
-
-	if (once_is_enough)
-		goto out;
-	once_is_enough = 1;
-
-	/* We might have to parameterize this later */
-	slot = 0xE;
-	/* Get out now if there's a real NuBus card in slot E */
-	if (nubus_find_slot(slot, NULL) != NULL)
-		goto out;
-
-	/* The pseudo-ISA bits always live at offset 0x300 (gee,
-           wonder why...) */
-	ioaddr = (unsigned long)
-		nubus_slot_addr(slot) | (((slot&0xf) << 20) + DEFAULTIOBASE);
-	{
-		unsigned long flags;
-		int card_present;
-
-		local_irq_save(flags);
-		card_present = (hwreg_present((void*) ioaddr+4) &&
-				hwreg_present((void*) ioaddr + DATA_PORT));
-		local_irq_restore(flags);
-
-		if (!card_present)
-			goto out;
-	}
-
-	nubus_writew(0, ioaddr + ADD_PORT);
-	sig = nubus_readw(ioaddr + DATA_PORT);
-	if (sig != swab16(CHIP_EISA_ID_SIG))
-		goto out;
-
-	/* Initialize the net_device structure. */
-	lp = netdev_priv(dev);
-
-	/* Fill in the 'dev' fields. */
-	dev->base_addr = ioaddr;
-	dev->mem_start = (unsigned long)
-		nubus_slot_addr(slot) | (((slot&0xf) << 20) + MMIOBASE);
-	dev->mem_end = dev->mem_start + 0x1000;
-
-	/* Turn on shared memory */
-	writereg_io(dev, PP_BusCTL, MEMORY_ON);
-
-	/* get the chip type */
-	rev_type = readreg(dev, PRODUCT_ID_ADD);
-	lp->chip_type = rev_type &~ REVISON_BITS;
-	lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
-
-	/* Check the chip type and revision in order to set the correct send command
-	CS8920 revision C and CS8900 revision F can use the faster send. */
-	lp->send_cmd = TX_AFTER_381;
-	if (lp->chip_type == CS8900 && lp->chip_revision >= 'F')
-		lp->send_cmd = TX_NOW;
-	if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
-		lp->send_cmd = TX_NOW;
-
-	if (net_debug && version_printed++ == 0)
-		printk(version);
-
-	printk(KERN_INFO "%s: cs89%c0%s rev %c found at %#8lx",
-	       dev->name,
-	       lp->chip_type==CS8900?'0':'2',
-	       lp->chip_type==CS8920M?"M":"",
-	       lp->chip_revision,
-	       dev->base_addr);
-
-	/* Try to read the MAC address */
-	if ((readreg(dev, PP_SelfST) & (EEPROM_PRESENT | EEPROM_OK)) == 0) {
-		printk("\nmac89x0: No EEPROM, giving up now.\n");
-		goto out1;
-        } else {
-                for (i = 0; i < ETH_ALEN; i += 2) {
-			/* Big-endian (why??!) */
-			unsigned short s = readreg(dev, PP_IA + i);
-                        dev->dev_addr[i] = s >> 8;
-                        dev->dev_addr[i+1] = s & 0xff;
-                }
-        }
-
-	dev->irq = SLOT2IRQ(slot);
-
-	/* print the IRQ and ethernet address. */
-
-	printk(" IRQ %d ADDR %pM\n", dev->irq, dev->dev_addr);
-
-	dev->netdev_ops		= &mac89x0_netdev_ops;
-
-	err = register_netdev(dev);
-	if (err)
-		goto out1;
-	return NULL;
-out1:
-	nubus_writew(0, dev->base_addr + ADD_PORT);
-out:
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-
-#if 0
-/* This is useful for something, but I don't know what yet. */
-void __init reset_chip(struct net_device *dev)
-{
-	int reset_start_time;
-
-	writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
-
-	/* wait 30 ms */
-	msleep_interruptible(30);
-
-	/* Wait until the chip is reset */
-	reset_start_time = jiffies;
-	while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
-		;
-}
-#endif
-
-/* Open/initialize the board.  This is called (in the current kernel)
-   sometime after booting when the 'ifconfig' program is run.
-
-   This routine should set everything up anew at each open, even
-   registers that "should" only need to be set once at boot, so that
-   there is non-reboot way to recover if something goes wrong.
-   */
-static int
-net_open(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	int i;
-
-	/* Disable the interrupt for now */
-	writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) & ~ENABLE_IRQ);
-
-	/* Grab the interrupt */
-	if (request_irq(dev->irq, net_interrupt, 0, "cs89x0", dev))
-		return -EAGAIN;
-
-	/* Set up the IRQ - Apparently magic */
-	if (lp->chip_type == CS8900)
-		writereg(dev, PP_CS8900_ISAINT, 0);
-	else
-		writereg(dev, PP_CS8920_ISAINT, 0);
-
-	/* set the Ethernet address */
-	for (i=0; i < ETH_ALEN/2; i++)
-		writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
-
-	/* Turn on both receive and transmit operations */
-	writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
-
-	/* Receive only error free packets addressed to this card */
-	lp->rx_mode = 0;
-	writereg(dev, PP_RxCTL, DEF_RX_ACCEPT);
-
-	lp->curr_rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL;
-
-	writereg(dev, PP_RxCFG, lp->curr_rx_cfg);
-
-	writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL |
-	       TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
-
-	writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL |
-		 TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
-
-	/* now that we've got our act together, enable everything */
-	writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) | ENABLE_IRQ);
-	netif_start_queue(dev);
-	return 0;
-}
-
-static int
-net_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-
-	if (net_debug > 3)
-		printk("%s: sent %d byte packet of type %x\n",
-		       dev->name, skb->len,
-		       (skb->data[ETH_ALEN+ETH_ALEN] << 8)
-		       | skb->data[ETH_ALEN+ETH_ALEN+1]);
-
-	/* keep the upload from being interrupted, since we
-	   ask the chip to start transmitting before the
-	   whole packet has been completely uploaded. */
-	local_irq_save(flags);
-	netif_stop_queue(dev);
-
-	/* initiate a transmit sequence */
-	writereg(dev, PP_TxCMD, lp->send_cmd);
-	writereg(dev, PP_TxLength, skb->len);
-
-	/* Test to see if the chip has allocated memory for the packet */
-	if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
-		/* Gasp!  It hasn't.  But that shouldn't happen since
-		   we're waiting for TxOk, so return 1 and requeue this packet. */
-		local_irq_restore(flags);
-		return NETDEV_TX_BUSY;
-	}
-
-	/* Write the contents of the packet */
-	skb_copy_from_linear_data(skb, (void *)(dev->mem_start + PP_TxFrame),
-				  skb->len+1);
-
-	local_irq_restore(flags);
-	dev_kfree_skb (skb);
-
-	return NETDEV_TX_OK;
-}
-
-/* The typical workload of the driver:
-   Handle the network interface interrupts. */
-static irqreturn_t net_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct net_local *lp;
-	int ioaddr, status;
-
-	if (dev == NULL) {
-		printk ("net_interrupt(): irq %d for unknown device.\n", irq);
-		return IRQ_NONE;
-	}
-
-	ioaddr = dev->base_addr;
-	lp = netdev_priv(dev);
-
-	/* we MUST read all the events out of the ISQ, otherwise we'll never
-           get interrupted again.  As a consequence, we can't have any limit
-           on the number of times we loop in the interrupt handler.  The
-           hardware guarantees that eventually we'll run out of events.  Of
-           course, if you're on a slow machine, and packets are arriving
-           faster than you can read them off, you're screwed.  Hasta la
-           vista, baby!  */
-	while ((status = swab16(nubus_readw(dev->base_addr + ISQ_PORT)))) {
-		if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status);
-		switch(status & ISQ_EVENT_MASK) {
-		case ISQ_RECEIVER_EVENT:
-			/* Got a packet(s). */
-			net_rx(dev);
-			break;
-		case ISQ_TRANSMITTER_EVENT:
-			dev->stats.tx_packets++;
-			netif_wake_queue(dev);
-			if ((status & TX_OK) == 0)
-				dev->stats.tx_errors++;
-			if (status & TX_LOST_CRS)
-				dev->stats.tx_carrier_errors++;
-			if (status & TX_SQE_ERROR)
-				dev->stats.tx_heartbeat_errors++;
-			if (status & TX_LATE_COL)
-				dev->stats.tx_window_errors++;
-			if (status & TX_16_COL)
-				dev->stats.tx_aborted_errors++;
-			break;
-		case ISQ_BUFFER_EVENT:
-			if (status & READY_FOR_TX) {
-				/* we tried to transmit a packet earlier,
-                                   but inexplicably ran out of buffers.
-                                   That shouldn't happen since we only ever
-                                   load one packet.  Shrug.  Do the right
-                                   thing anyway. */
-				netif_wake_queue(dev);
-			}
-			if (status & TX_UNDERRUN) {
-				if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
-                                lp->send_underrun++;
-                                if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
-                                else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
-                        }
-			break;
-		case ISQ_RX_MISS_EVENT:
-			dev->stats.rx_missed_errors += (status >> 6);
-			break;
-		case ISQ_TX_COL_EVENT:
-			dev->stats.collisions += (status >> 6);
-			break;
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-/* We have a good packet(s), get it/them out of the buffers. */
-static void
-net_rx(struct net_device *dev)
-{
-	struct sk_buff *skb;
-	int status, length;
-
-	status = readreg(dev, PP_RxStatus);
-	if ((status & RX_OK) == 0) {
-		dev->stats.rx_errors++;
-		if (status & RX_RUNT)
-				dev->stats.rx_length_errors++;
-		if (status & RX_EXTRA_DATA)
-				dev->stats.rx_length_errors++;
-		if ((status & RX_CRC_ERROR) &&
-		    !(status & (RX_EXTRA_DATA|RX_RUNT)))
-			/* per str 172 */
-			dev->stats.rx_crc_errors++;
-		if (status & RX_DRIBBLE)
-				dev->stats.rx_frame_errors++;
-		return;
-	}
-
-	length = readreg(dev, PP_RxLength);
-	/* Malloc up new buffer. */
-	skb = alloc_skb(length, GFP_ATOMIC);
-	if (skb == NULL) {
-		printk("%s: Memory squeeze, dropping packet.\n", dev->name);
-		dev->stats.rx_dropped++;
-		return;
-	}
-	skb_put(skb, length);
-
-	skb_copy_to_linear_data(skb, (void *)(dev->mem_start + PP_RxFrame),
-				length);
-
-	if (net_debug > 3)printk("%s: received %d byte packet of type %x\n",
-                                 dev->name, length,
-                                 (skb->data[ETH_ALEN+ETH_ALEN] << 8)
-				 | skb->data[ETH_ALEN+ETH_ALEN+1]);
-
-        skb->protocol=eth_type_trans(skb,dev);
-	netif_rx(skb);
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += length;
-}
-
-/* The inverse routine to net_open(). */
-static int
-net_close(struct net_device *dev)
-{
-
-	writereg(dev, PP_RxCFG, 0);
-	writereg(dev, PP_TxCFG, 0);
-	writereg(dev, PP_BufCFG, 0);
-	writereg(dev, PP_BusCTL, 0);
-
-	netif_stop_queue(dev);
-
-	free_irq(dev->irq, dev);
-
-	/* Update the statistics here. */
-
-	return 0;
-
-}
-
-/* Get the current statistics.	This may be called with the card open or
-   closed. */
-static struct net_device_stats *
-net_get_stats(struct net_device *dev)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	/* Update the statistics from the device registers. */
-	dev->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6);
-	dev->stats.collisions += (readreg(dev, PP_TxCol) >> 6);
-	local_irq_restore(flags);
-
-	return &dev->stats;
-}
-
-static void set_multicast_list(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-
-	if(dev->flags&IFF_PROMISC)
-	{
-		lp->rx_mode = RX_ALL_ACCEPT;
-	} else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) {
-		/* The multicast-accept list is initialized to accept-all, and we
-		   rely on higher-level filtering for now. */
-		lp->rx_mode = RX_MULTCAST_ACCEPT;
-	}
-	else
-		lp->rx_mode = 0;
-
-	writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
-
-	/* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */
-	writereg(dev, PP_RxCFG, lp->curr_rx_cfg |
-	     (lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
-}
-
-
-static int set_mac_address(struct net_device *dev, void *addr)
-{
-	int i;
-	printk("%s: Setting MAC address to ", dev->name);
-	for (i = 0; i < 6; i++)
-		printk(" %2.2x", dev->dev_addr[i] = ((unsigned char *)addr)[i]);
-	printk(".\n");
-	/* set the Ethernet address */
-	for (i=0; i < ETH_ALEN/2; i++)
-		writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
-
-	return 0;
-}
-
-#ifdef MODULE
-
-static struct net_device *dev_cs89x0;
-static int debug;
-
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "CS89[02]0 debug level (0-5)");
-MODULE_LICENSE("GPL");
-
-int __init
-init_module(void)
-{
-	net_debug = debug;
-        dev_cs89x0 = mac89x0_probe(-1);
-	if (IS_ERR(dev_cs89x0)) {
-                printk(KERN_WARNING "mac89x0.c: No card found\n");
-		return PTR_ERR(dev_cs89x0);
-	}
-	return 0;
-}
-
-void
-cleanup_module(void)
-{
-	unregister_netdev(dev_cs89x0);
-	nubus_writew(0, dev_cs89x0->base_addr + ADD_PORT);
-	free_netdev(dev_cs89x0);
-}
-#endif /* MODULE */