diff options
| author | Joe Perches <joe@perches.com> | 2009-12-03 07:58:21 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2009-12-03 13:18:01 -0800 |
| commit | 8e95a2026f3b43f7c3d676adaccd2de9532e8dcc (patch) | |
| tree | 3733318168cd512480b6db58c5c16d1c8847f0b7 /drivers/net/lance.c | |
| parent | 3454f835837609d60b29a266e3bd9d701073b060 (diff) | |
drivers/net: Move && and || to end of previous line
Only files where David Miller is the primary git-signer.
wireless, wimax, ixgbe, etc are not modified.
Compile tested x86 allyesconfig only
Not all files compiled (not x86 compatible)
Added a few > 80 column lines, which I ignored.
Existing checkpatch complaints ignored.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/lance.c')
| -rw-r--r-- | drivers/net/lance.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/drivers/net/lance.c b/drivers/net/lance.c index 7b2c42992c3..8d7d3d4625f 100644 --- a/drivers/net/lance.c +++ b/drivers/net/lance.c @@ -493,14 +493,14 @@ static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int static const short ioaddr_table[] = { 0x300, 0x320, 0x340, 0x360}; int hp_port = (readl(bios + 1) & 1) ? 0x499 : 0x99; /* We can have boards other than the built-in! Verify this is on-board. */ - if ((inb(hp_port) & 0xc0) == 0x80 - && ioaddr_table[inb(hp_port) & 3] == ioaddr) + if ((inb(hp_port) & 0xc0) == 0x80 && + ioaddr_table[inb(hp_port) & 3] == ioaddr) hp_builtin = hp_port; } iounmap(bios); /* We also recognize the HP Vectra on-board here, but check below. */ - hpJ2405A = (inb(ioaddr) == 0x08 && inb(ioaddr+1) == 0x00 - && inb(ioaddr+2) == 0x09); + hpJ2405A = (inb(ioaddr) == 0x08 && inb(ioaddr+1) == 0x00 && + inb(ioaddr+2) == 0x09); /* Reset the LANCE. */ reset_val = inw(ioaddr+LANCE_RESET); /* Reset the LANCE */ @@ -1035,8 +1035,8 @@ static irqreturn_t lance_interrupt(int irq, void *dev_id) spin_lock (&lp->devlock); outw(0x00, dev->base_addr + LANCE_ADDR); - while ((csr0 = inw(dev->base_addr + LANCE_DATA)) & 0x8600 - && --boguscnt >= 0) { + while ((csr0 = inw(dev->base_addr + LANCE_DATA)) & 0x8600 && + --boguscnt >= 0) { /* Acknowledge all of the current interrupt sources ASAP. */ outw(csr0 & ~0x004f, dev->base_addr + LANCE_DATA); |