diff options
| author | PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> | 2009-04-09 22:28:15 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2009-04-11 02:48:01 -0700 |
| commit | 553b449784e27bb7244c41aa27397d29f213e5a3 (patch) | |
| tree | 041c34e3d1524ffd530c3a196e7846370a8b5d5a /drivers/net/ixgbe/ixgbe_phy.c | |
| parent | 04f165ef4f18444854865d44a3359618480060af (diff) | |
ixgbe: Remove unnecessary PHY reset, properly identify multispeed fiber modules
This patch does two things:
1) On 82599, the PHY is emedded in the MAC. On 82598, the SFP+ NIC has an external PHY. The reset in the SFP+ setup patch for 82598 is unnecessary on 82599, and adds extra dead time to device initialization. This removes that PHY reset for 82599 only.
2) On 82599, the SFP+ modules are multispeed fiber modules (10G/1G). We need to make sure to identify them properly for the remaining init sections to properly set them up.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_phy.c')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.c | 11 |
1 files changed, 11 insertions, 0 deletions
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 14e9606aa3b..6f11df756da 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -552,6 +552,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) { s32 status = IXGBE_ERR_PHY_ADDR_INVALID; u32 vendor_oui = 0; + enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type; u8 identifier = 0; u8 comp_codes_1g = 0; u8 comp_codes_10g = 0; @@ -620,6 +621,16 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) hw->phy.sfp_type = ixgbe_sfp_type_unknown; } + if (hw->phy.sfp_type != stored_sfp_type) + hw->phy.sfp_setup_needed = true; + + /* Determine if the SFP+ PHY is dual speed or not. */ + if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && + (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || + ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) && + (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE))) + hw->phy.multispeed_fiber = true; + /* Determine PHY vendor */ if (hw->phy.type == ixgbe_phy_unknown) { hw->phy.id = identifier; |