Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 194 insertions, 0 deletions

diff --git a/drivers/net/irda/smsc-ircc2.h b/drivers/net/irda/smsc-ircc2.h
new file mode 100644
index 00000000000..458611cc0d4
--- /dev/null
+++ b/drivers/net/irda/smsc-ircc2.h
@@ -0,0 +1,194 @@
+/*********************************************************************
+ * $Id: smsc-ircc2.h,v 1.12.2.1 2002/10/27 10:52:37 dip Exp $               
+ *
+ * Description:   Definitions for the SMC IrCC chipset
+ * Status:        Experimental.
+ * Author:        Daniele Peri (peri@csai.unipa.it)
+ *
+ *     Copyright (c) 2002      Daniele Peri
+ *     All Rights Reserved.
+ *
+ * Based on smc-ircc.h:
+ * 
+ *     Copyright (c) 1999-2000, Dag Brattli <dagb@cs.uit.no>
+ *     Copyright (c) 1998-1999, Thomas Davis (tadavis@jps.net>
+ *     All Rights Reserved
+ *
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+#ifndef SMSC_IRCC2_H
+#define SMSC_IRCC2_H
+
+/* DMA modes needed */
+#define DMA_TX_MODE                0x08    /* Mem to I/O, ++, demand. */
+#define DMA_RX_MODE                0x04    /* I/O to mem, ++, demand. */
+
+/* Master Control Register */
+#define IRCC_MASTER                0x07
+#define   IRCC_MASTER_POWERDOWN	   0x80
+#define   IRCC_MASTER_RESET        0x40
+#define   IRCC_MASTER_INT_EN       0x20
+#define   IRCC_MASTER_ERROR_RESET  0x10
+
+/* Register block 0 */
+
+/* Interrupt Identification */
+#define IRCC_IIR					0x01
+#define   IRCC_IIR_ACTIVE_FRAME		0x80
+#define   IRCC_IIR_EOM				0x40
+#define   IRCC_IIR_RAW_MODE			0x20
+#define   IRCC_IIR_FIFO				0x10
+
+/* Interrupt Enable */
+#define IRCC_IER					0x02
+#define   IRCC_IER_ACTIVE_FRAME		0x80
+#define   IRCC_IER_EOM				0x40
+#define   IRCC_IER_RAW_MODE			0x20
+#define   IRCC_IER_FIFO				0x10
+
+/* Line Status Register */
+#define IRCC_LSR					0x03
+#define   IRCC_LSR_UNDERRUN			0x80
+#define   IRCC_LSR_OVERRUN			0x40
+#define   IRCC_LSR_FRAME_ERROR		0x20
+#define   IRCC_LSR_SIZE_ERROR		0x10
+#define   IRCC_LSR_CRC_ERROR		0x80
+#define   IRCC_LSR_FRAME_ABORT		0x40
+
+/* Line Status Address Register */
+#define IRCC_LSAR					0x03
+#define IRCC_LSAR_ADDRESS_MASK		0x07
+
+/* Line Control Register A */
+#define IRCC_LCR_A                 0x04
+#define   IRCC_LCR_A_FIFO_RESET    0x80
+#define   IRCC_LCR_A_FAST          0x40
+#define   IRCC_LCR_A_GP_DATA       0x20
+#define   IRCC_LCR_A_RAW_TX        0x10
+#define   IRCC_LCR_A_RAW_RX        0x08
+#define   IRCC_LCR_A_ABORT         0x04
+#define   IRCC_LCR_A_DATA_DONE     0x02
+
+/* Line Control Register B */
+#define IRCC_LCR_B                 0x05
+#define   IRCC_LCR_B_SCE_DISABLED  0x00
+#define   IRCC_LCR_B_SCE_TRANSMIT  0x40
+#define   IRCC_LCR_B_SCE_RECEIVE   0x80
+#define   IRCC_LCR_B_SCE_UNDEFINED 0xc0
+#define   IRCC_LCR_B_SIP_ENABLE	   0x20
+#define   IRCC_LCR_B_BRICK_WALL    0x10
+
+/* Bus Status Register */
+#define IRCC_BSR                   0x06
+#define   IRCC_BSR_NOT_EMPTY	   0x80
+#define   IRCC_BSR_FIFO_FULL	   0x40
+#define   IRCC_BSR_TIMEOUT	   0x20
+
+/* Register block 1 */
+
+#define IRCC_FIFO_THRESHOLD			0x02
+
+#define IRCC_SCE_CFGA				0x00
+#define   IRCC_CFGA_AUX_IR			0x80
+#define   IRCC_CFGA_HALF_DUPLEX		0x04
+#define   IRCC_CFGA_TX_POLARITY		0x02
+#define   IRCC_CFGA_RX_POLARITY		0x01
+
+#define   IRCC_CFGA_COM				0x00
+#define		IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK	0x87
+#define   	IRCC_CFGA_IRDA_SIR_A	0x08
+#define   	IRCC_CFGA_ASK_SIR		0x10
+#define   	IRCC_CFGA_IRDA_SIR_B	0x18
+#define   	IRCC_CFGA_IRDA_HDLC		0x20
+#define		IRCC_CFGA_IRDA_4PPM		0x28
+#define		IRCC_CFGA_CONSUMER		0x30
+#define		IRCC_CFGA_RAW_IR		0x38
+#define     IRCC_CFGA_OTHER			0x40
+
+#define IRCC_IR_HDLC               0x04
+#define IRCC_IR_4PPM               0x01
+#define IRCC_IR_CONSUMER           0x02
+
+#define IRCC_SCE_CFGB	           0x01
+#define IRCC_CFGB_LOOPBACK         0x20
+#define IRCC_CFGB_LPBCK_TX_CRC	   0x10
+#define IRCC_CFGB_NOWAIT	   0x08
+#define IRCC_CFGB_STRING_MOVE	   0x04
+#define IRCC_CFGB_DMA_BURST 	   0x02
+#define IRCC_CFGB_DMA_ENABLE	   0x01
+
+#define IRCC_CFGB_MUX_COM          0x00
+#define IRCC_CFGB_MUX_IR           0x40
+#define IRCC_CFGB_MUX_AUX          0x80
+#define IRCC_CFGB_MUX_INACTIVE	   0xc0
+
+/* Register block 3 - Identification Registers! */
+#define IRCC_ID_HIGH	           0x00   /* 0x10 */
+#define IRCC_ID_LOW	           0x01   /* 0xB8 */
+#define IRCC_CHIP_ID 	           0x02   /* 0xF1 */
+#define IRCC_VERSION	           0x03   /* 0x01 */
+#define IRCC_INTERFACE	           0x04   /* low 4 = DMA, high 4 = IRQ */
+#define 	IRCC_INTERFACE_DMA_MASK	0x0F   /* low 4 = DMA, high 4 = IRQ */
+#define 	IRCC_INTERFACE_IRQ_MASK	0xF0   /* low 4 = DMA, high 4 = IRQ */
+
+/* Register block 4 - IrDA */
+#define IRCC_CONTROL               0x00
+#define IRCC_BOF_COUNT_LO          0x01 /* Low byte */
+#define IRCC_BOF_COUNT_HI          0x00 /* High nibble (bit 0-3) */
+#define IRCC_BRICKWALL_CNT_LO      0x02 /* Low byte */
+#define IRCC_BRICKWALL_CNT_HI      0x03 /* High nibble (bit 4-7) */
+#define IRCC_TX_SIZE_LO            0x04 /* Low byte */
+#define IRCC_TX_SIZE_HI            0x03 /* High nibble (bit 0-3) */
+#define IRCC_RX_SIZE_HI            0x05 /* High nibble (bit 0-3) */
+#define IRCC_RX_SIZE_LO            0x06 /* Low byte */
+
+#define IRCC_1152                  0x80
+#define IRCC_CRC                   0x40
+
+/* Register block 5 - IrDA */
+#define IRCC_ATC					0x00
+#define 	IRCC_ATC_nPROGREADY		0x80
+#define 	IRCC_ATC_SPEED			0x40
+#define 	IRCC_ATC_ENABLE			0x20
+#define 	IRCC_ATC_MASK			0xE0
+
+
+#define IRCC_IRHALFDUPLEX_TIMEOUT	0x01
+
+#define IRCC_SCE_TX_DELAY_TIMER		0x02
+
+/*
+ * Other definitions
+ */
+
+#define SMSC_IRCC2_MAX_SIR_SPEED		115200
+#define SMSC_IRCC2_FIR_CHIP_IO_EXTENT 	8
+#define SMSC_IRCC2_SIR_CHIP_IO_EXTENT 	8
+#define SMSC_IRCC2_FIFO_SIZE			16
+#define SMSC_IRCC2_FIFO_THRESHOLD		64
+/* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
+#define SMSC_IRCC2_RX_BUFF_TRUESIZE		14384
+#define SMSC_IRCC2_TX_BUFF_TRUESIZE		14384
+#define SMSC_IRCC2_MIN_TURN_TIME		0x07
+#define SMSC_IRCC2_WINDOW_SIZE			0x07
+/* Maximum wait for hw transmitter to finish */
+#define SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US	1000	/* 1 ms */
+/* Maximum wait for ATC transceiver programming to finish */
+#define SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES 1
+#endif /* SMSC_IRCC2_H */