Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

12 files changed, 3896 insertions, 0 deletions

diff --git a/drivers/net/ibm_emac/Makefile b/drivers/net/ibm_emac/Makefile
new file mode 100644
index 00000000000..7f583a333c2
--- /dev/null
+++ b/drivers/net/ibm_emac/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the IBM PPC4xx EMAC controllers
+#
+
+obj-$(CONFIG_IBM_EMAC) += ibm_emac.o
+
+ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o
+
+# Only need this if you want to see additional debug messages
+ifeq ($(CONFIG_IBM_EMAC_ERRMSG), y)
+ibm_emac-objs += ibm_emac_debug.o
+endif
diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h
new file mode 100644
index 00000000000..15d5a0e8286
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac.h
@@ -0,0 +1,267 @@
+/*
+ * ibm_emac.h
+ *
+ *
+ *      Armin Kuster akuster@mvista.com
+ *      June, 2002
+ *
+ * Copyright 2002 MontaVista Softare Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _IBM_EMAC_H_
+#define _IBM_EMAC_H_
+/* General defines needed for the driver */
+
+/* Emac */
+typedef struct emac_regs {
+	u32 em0mr0;
+	u32 em0mr1;
+	u32 em0tmr0;
+	u32 em0tmr1;
+	u32 em0rmr;
+	u32 em0isr;
+	u32 em0iser;
+	u32 em0iahr;
+	u32 em0ialr;
+	u32 em0vtpid;
+	u32 em0vtci;
+	u32 em0ptr;
+	u32 em0iaht1;
+	u32 em0iaht2;
+	u32 em0iaht3;
+	u32 em0iaht4;
+	u32 em0gaht1;
+	u32 em0gaht2;
+	u32 em0gaht3;
+	u32 em0gaht4;
+	u32 em0lsah;
+	u32 em0lsal;
+	u32 em0ipgvr;
+	u32 em0stacr;
+	u32 em0trtr;
+	u32 em0rwmr;
+} emac_t;
+
+/* MODE REG 0 */
+#define EMAC_M0_RXI			0x80000000
+#define EMAC_M0_TXI			0x40000000
+#define EMAC_M0_SRST			0x20000000
+#define EMAC_M0_TXE			0x10000000
+#define EMAC_M0_RXE			0x08000000
+#define EMAC_M0_WKE			0x04000000
+
+/* MODE Reg 1 */
+#define EMAC_M1_FDE			0x80000000
+#define EMAC_M1_ILE			0x40000000
+#define EMAC_M1_VLE			0x20000000
+#define EMAC_M1_EIFC			0x10000000
+#define EMAC_M1_APP			0x08000000
+#define EMAC_M1_AEMI			0x02000000
+#define EMAC_M1_IST			0x01000000
+#define EMAC_M1_MF_1000GPCS		0x00c00000	/* Internal GPCS */
+#define EMAC_M1_MF_1000MBPS		0x00800000	/* External GPCS */
+#define EMAC_M1_MF_100MBPS		0x00400000
+#define EMAC_M1_RFS_16K                 0x00280000	/* 000 for 512 byte */
+#define EMAC_M1_TR			0x00008000
+#ifdef CONFIG_IBM_EMAC4
+#define EMAC_M1_RFS_8K                  0x00200000
+#define EMAC_M1_RFS_4K                  0x00180000
+#define EMAC_M1_RFS_2K                  0x00100000
+#define EMAC_M1_RFS_1K                  0x00080000
+#define EMAC_M1_TX_FIFO_16K             0x00050000	/* 0's for 512 byte */
+#define EMAC_M1_TX_FIFO_8K              0x00040000
+#define EMAC_M1_TX_FIFO_4K              0x00030000
+#define EMAC_M1_TX_FIFO_2K              0x00020000
+#define EMAC_M1_TX_FIFO_1K              0x00010000
+#define EMAC_M1_TX_TR                   0x00008000
+#define EMAC_M1_TX_MWSW                 0x00001000	/* 0 wait for status */
+#define EMAC_M1_JUMBO_ENABLE            0x00000800	/* Upt to 9Kr status */
+#define EMAC_M1_OPB_CLK_66              0x00000008	/* 66Mhz */
+#define EMAC_M1_OPB_CLK_83              0x00000010	/* 83Mhz */
+#define EMAC_M1_OPB_CLK_100             0x00000018	/* 100Mhz */
+#define EMAC_M1_OPB_CLK_100P            0x00000020	/* 100Mhz+ */
+#else				/* CONFIG_IBM_EMAC4 */
+#define EMAC_M1_RFS_4K			0x00300000	/* ~4k for 512 byte */
+#define EMAC_M1_RFS_2K			0x00200000
+#define EMAC_M1_RFS_1K			0x00100000
+#define EMAC_M1_TX_FIFO_2K		0x00080000	/* 0's for 512 byte */
+#define EMAC_M1_TX_FIFO_1K		0x00040000
+#define EMAC_M1_TR0_DEPEND		0x00010000	/* 0'x for single packet */
+#define EMAC_M1_TR1_DEPEND		0x00004000
+#define EMAC_M1_TR1_MULTI		0x00002000
+#define EMAC_M1_JUMBO_ENABLE		0x00001000
+#endif				/* CONFIG_IBM_EMAC4 */
+#define EMAC_M1_BASE			(EMAC_M1_TX_FIFO_2K | \
+					EMAC_M1_APP | \
+					EMAC_M1_TR | EMAC_M1_VLE)
+
+/* Transmit Mode Register 0 */
+#define EMAC_TMR0_GNP0			0x80000000
+#define EMAC_TMR0_GNP1			0x40000000
+#define EMAC_TMR0_GNPD			0x20000000
+#define EMAC_TMR0_FC			0x10000000
+#define EMAC_TMR0_TFAE_2_32		0x00000001
+#define EMAC_TMR0_TFAE_4_64		0x00000002
+#define EMAC_TMR0_TFAE_8_128		0x00000003
+#define EMAC_TMR0_TFAE_16_256		0x00000004
+#define EMAC_TMR0_TFAE_32_512		0x00000005
+#define EMAC_TMR0_TFAE_64_1024		0x00000006
+#define EMAC_TMR0_TFAE_128_2048		0x00000007
+
+/* Receive Mode Register */
+#define EMAC_RMR_SP			0x80000000
+#define EMAC_RMR_SFCS			0x40000000
+#define EMAC_RMR_ARRP			0x20000000
+#define EMAC_RMR_ARP			0x10000000
+#define EMAC_RMR_AROP			0x08000000
+#define EMAC_RMR_ARPI			0x04000000
+#define EMAC_RMR_PPP			0x02000000
+#define EMAC_RMR_PME			0x01000000
+#define EMAC_RMR_PMME			0x00800000
+#define EMAC_RMR_IAE			0x00400000
+#define EMAC_RMR_MIAE			0x00200000
+#define EMAC_RMR_BAE			0x00100000
+#define EMAC_RMR_MAE			0x00080000
+#define EMAC_RMR_RFAF_2_32		0x00000001
+#define EMAC_RMR_RFAF_4_64		0x00000002
+#define EMAC_RMR_RFAF_8_128		0x00000003
+#define EMAC_RMR_RFAF_16_256		0x00000004
+#define EMAC_RMR_RFAF_32_512		0x00000005
+#define EMAC_RMR_RFAF_64_1024		0x00000006
+#define EMAC_RMR_RFAF_128_2048		0x00000007
+#define EMAC_RMR_BASE			(EMAC_RMR_IAE | EMAC_RMR_BAE)
+
+/* Interrupt Status & enable Regs */
+#define EMAC_ISR_OVR			0x02000000
+#define EMAC_ISR_PP			0x01000000
+#define EMAC_ISR_BP			0x00800000
+#define EMAC_ISR_RP			0x00400000
+#define EMAC_ISR_SE			0x00200000
+#define EMAC_ISR_ALE			0x00100000
+#define EMAC_ISR_BFCS			0x00080000
+#define EMAC_ISR_PTLE			0x00040000
+#define EMAC_ISR_ORE			0x00020000
+#define EMAC_ISR_IRE			0x00010000
+#define EMAC_ISR_DBDM			0x00000200
+#define EMAC_ISR_DB0			0x00000100
+#define EMAC_ISR_SE0			0x00000080
+#define EMAC_ISR_TE0			0x00000040
+#define EMAC_ISR_DB1			0x00000020
+#define EMAC_ISR_SE1			0x00000010
+#define EMAC_ISR_TE1			0x00000008
+#define EMAC_ISR_MOS			0x00000002
+#define EMAC_ISR_MOF			0x00000001
+
+/* STA CONTROL REG */
+#define EMAC_STACR_OC			0x00008000
+#define EMAC_STACR_PHYE			0x00004000
+#define EMAC_STACR_WRITE		0x00002000
+#define EMAC_STACR_READ			0x00001000
+#define EMAC_STACR_CLK_83MHZ		0x00000800	/* 0's for 50Mhz */
+#define EMAC_STACR_CLK_66MHZ		0x00000400
+#define EMAC_STACR_CLK_100MHZ		0x00000C00
+
+/* Transmit Request Threshold Register */
+#define EMAC_TRTR_1600			0x18000000	/* 0's for 64 Bytes */
+#define EMAC_TRTR_1024			0x0f000000
+#define EMAC_TRTR_512			0x07000000
+#define EMAC_TRTR_256			0x03000000
+#define EMAC_TRTR_192			0x10000000
+#define EMAC_TRTR_128			0x01000000
+
+#define EMAC_TX_CTRL_GFCS		0x0200
+#define EMAC_TX_CTRL_GP			0x0100
+#define EMAC_TX_CTRL_ISA		0x0080
+#define EMAC_TX_CTRL_RSA		0x0040
+#define EMAC_TX_CTRL_IVT		0x0020
+#define EMAC_TX_CTRL_RVT		0x0010
+#define EMAC_TX_CTRL_TAH_CSUM		0x000e	/* TAH only */
+#define EMAC_TX_CTRL_TAH_SEG4		0x000a	/* TAH only */
+#define EMAC_TX_CTRL_TAH_SEG3		0x0008	/* TAH only */
+#define EMAC_TX_CTRL_TAH_SEG2		0x0006	/* TAH only */
+#define EMAC_TX_CTRL_TAH_SEG1		0x0004	/* TAH only */
+#define EMAC_TX_CTRL_TAH_SEG0		0x0002	/* TAH only */
+#define EMAC_TX_CTRL_TAH_DIS		0x0000	/* TAH only */
+
+#define EMAC_TX_CTRL_DFLT ( \
+	MAL_TX_CTRL_INTR | EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP )
+
+/* madmal transmit status / Control bits */
+#define EMAC_TX_ST_BFCS			0x0200
+#define EMAC_TX_ST_BPP			0x0100
+#define EMAC_TX_ST_LCS			0x0080
+#define EMAC_TX_ST_ED			0x0040
+#define EMAC_TX_ST_EC			0x0020
+#define EMAC_TX_ST_LC			0x0010
+#define EMAC_TX_ST_MC			0x0008
+#define EMAC_TX_ST_SC			0x0004
+#define EMAC_TX_ST_UR			0x0002
+#define EMAC_TX_ST_SQE			0x0001
+
+/* madmal receive status / Control bits */
+#define EMAC_RX_ST_OE			0x0200
+#define EMAC_RX_ST_PP			0x0100
+#define EMAC_RX_ST_BP			0x0080
+#define EMAC_RX_ST_RP			0x0040
+#define EMAC_RX_ST_SE			0x0020
+#define EMAC_RX_ST_AE			0x0010
+#define EMAC_RX_ST_BFCS			0x0008
+#define EMAC_RX_ST_PTL			0x0004
+#define EMAC_RX_ST_ORE			0x0002
+#define EMAC_RX_ST_IRE			0x0001
+#define EMAC_BAD_RX_PACKET		0x02ff
+#define EMAC_CSUM_VER_ERROR		0x0003
+
+/* identify a bad rx packet dependent on emac features */
+#ifdef CONFIG_IBM_EMAC4
+#define EMAC_IS_BAD_RX_PACKET(desc) \
+	(((desc & (EMAC_BAD_RX_PACKET & ~EMAC_CSUM_VER_ERROR)) || \
+	((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_ORE) || \
+	((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_IRE)))
+#else
+#define EMAC_IS_BAD_RX_PACKET(desc) \
+	 (desc & EMAC_BAD_RX_PACKET)
+#endif
+
+/* SoC implementation specific EMAC register defaults */
+#if defined(CONFIG_440GP)
+#define EMAC_RWMR_DEFAULT		0x80009000
+#define EMAC_TMR0_DEFAULT		0x00000000
+#define EMAC_TMR1_DEFAULT		0xf8640000
+#elif defined(CONFIG_440GX)
+#define EMAC_RWMR_DEFAULT		0x1000a200
+#define EMAC_TMR0_DEFAULT		EMAC_TMR0_TFAE_2_32
+#define EMAC_TMR1_DEFAULT		0xa00f0000
+#elif defined(CONFIG_440SP)
+#define EMAC_RWMR_DEFAULT		0x08002000
+#define EMAC_TMR0_DEFAULT		EMAC_TMR0_TFAE_128_2048
+#define EMAC_TMR1_DEFAULT		0xf8200000
+#else
+#define EMAC_RWMR_DEFAULT		0x0f002000
+#define EMAC_TMR0_DEFAULT		0x00000000
+#define EMAC_TMR1_DEFAULT		0x380f0000
+#endif				/* CONFIG_440GP */
+
+/* Revision specific EMAC register defaults */
+#ifdef CONFIG_IBM_EMAC4
+#define EMAC_M1_DEFAULT			(EMAC_M1_BASE | \
+					EMAC_M1_OPB_CLK_83 | \
+					EMAC_M1_TX_MWSW)
+#define EMAC_RMR_DEFAULT		(EMAC_RMR_BASE | \
+					EMAC_RMR_RFAF_128_2048)
+#define EMAC_TMR0_XMIT			(EMAC_TMR0_GNP0 | \
+					EMAC_TMR0_DEFAULT)
+#define EMAC_TRTR_DEFAULT		EMAC_TRTR_1024
+#else				/* !CONFIG_IBM_EMAC4 */
+#define EMAC_M1_DEFAULT			EMAC_M1_BASE
+#define EMAC_RMR_DEFAULT		EMAC_RMR_BASE
+#define EMAC_TMR0_XMIT			EMAC_TMR0_GNP0
+#define EMAC_TRTR_DEFAULT		EMAC_TRTR_1600
+#endif				/* CONFIG_IBM_EMAC4 */
+
+#endif
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
new file mode 100644
index 00000000000..ab44358ddbf
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -0,0 +1,2012 @@
+/*
+ * ibm_emac_core.c
+ *
+ * Ethernet driver for the built in ethernet on the IBM 4xx PowerPC
+ * processors.
+ * 
+ * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
+ * Based on original work by
+ *
+ *      Armin Kuster <akuster@mvista.com>
+ * 	Johnnie Peters <jpeters@mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ * TODO
+ *       - Check for races in the "remove" code path
+ *       - Add some Power Management to the MAC and the PHY
+ *       - Audit remaining of non-rewritten code (--BenH)
+ *       - Cleanup message display using msglevel mecanism
+ *       - Address all errata
+ *       - Audit all register update paths to ensure they
+ *         are being written post soft reset if required.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/bitops.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/ocp.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/crc32.h>
+
+#include "ibm_emac_core.h"
+
+//#define MDIO_DEBUG(fmt) printk fmt
+#define MDIO_DEBUG(fmt)
+
+//#define LINK_DEBUG(fmt) printk fmt
+#define LINK_DEBUG(fmt)
+
+//#define PKT_DEBUG(fmt) printk fmt
+#define PKT_DEBUG(fmt)
+
+#define DRV_NAME        "emac"
+#define DRV_VERSION     "2.0"
+#define DRV_AUTHOR      "Benjamin Herrenschmidt <benh@kernel.crashing.org>"
+#define DRV_DESC        "IBM EMAC Ethernet driver"
+
+/*
+ * When mdio_idx >= 0, contains a list of emac ocp_devs
+ * that have had their initialization deferred until the
+ * common MDIO controller has been initialized.
+ */
+LIST_HEAD(emac_init_list);
+
+MODULE_AUTHOR(DRV_AUTHOR);
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_LICENSE("GPL");
+
+static int skb_res = SKB_RES;
+module_param(skb_res, int, 0444);
+MODULE_PARM_DESC(skb_res, "Amount of data to reserve on skb buffs\n"
+		 "The 405 handles a misaligned IP header fine but\n"
+		 "this can help if you are routing to a tunnel or a\n"
+		 "device that needs aligned data. 0..2");
+
+#define RGMII_PRIV(ocpdev) ((struct ibm_ocp_rgmii*)ocp_get_drvdata(ocpdev))
+
+static unsigned int rgmii_enable[] = {
+	RGMII_RTBI,
+	RGMII_RGMII,
+	RGMII_TBI,
+	RGMII_GMII
+};
+
+static unsigned int rgmii_speed_mask[] = {
+	RGMII_MII2_SPDMASK,
+	RGMII_MII3_SPDMASK
+};
+
+static unsigned int rgmii_speed100[] = {
+	RGMII_MII2_100MB,
+	RGMII_MII3_100MB
+};
+
+static unsigned int rgmii_speed1000[] = {
+	RGMII_MII2_1000MB,
+	RGMII_MII3_1000MB
+};
+
+#define ZMII_PRIV(ocpdev) ((struct ibm_ocp_zmii*)ocp_get_drvdata(ocpdev))
+
+static unsigned int zmii_enable[][4] = {
+	{ZMII_SMII0, ZMII_RMII0, ZMII_MII0,
+	 ~(ZMII_MDI1 | ZMII_MDI2 | ZMII_MDI3)},
+	{ZMII_SMII1, ZMII_RMII1, ZMII_MII1,
+	 ~(ZMII_MDI0 | ZMII_MDI2 | ZMII_MDI3)},
+	{ZMII_SMII2, ZMII_RMII2, ZMII_MII2,
+	 ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI3)},
+	{ZMII_SMII3, ZMII_RMII3, ZMII_MII3, ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI2)}
+};
+
+static unsigned int mdi_enable[] = {
+	ZMII_MDI0,
+	ZMII_MDI1,
+	ZMII_MDI2,
+	ZMII_MDI3
+};
+
+static unsigned int zmii_speed = 0x0;
+static unsigned int zmii_speed100[] = {
+	ZMII_MII0_100MB,
+	ZMII_MII1_100MB,
+	ZMII_MII2_100MB,
+	ZMII_MII3_100MB
+};
+
+/* Since multiple EMACs share MDIO lines in various ways, we need
+ * to avoid re-using the same PHY ID in cases where the arch didn't
+ * setup precise phy_map entries
+ */
+static u32 busy_phy_map = 0;
+
+/* If EMACs share a common MDIO device, this points to it */
+static struct net_device *mdio_ndev = NULL;
+
+struct emac_def_dev {
+	struct list_head link;
+	struct ocp_device *ocpdev;
+	struct ibm_ocp_mal *mal;
+};
+
+static struct net_device_stats *emac_stats(struct net_device *dev)
+{
+	struct ocp_enet_private *fep = dev->priv;
+	return &fep->stats;
+};
+
+static int
+emac_init_rgmii(struct ocp_device *rgmii_dev, int input, int phy_mode)
+{
+	struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(rgmii_dev);
+	const char *mode_name[] = { "RTBI", "RGMII", "TBI", "GMII" };
+	int mode = -1;
+
+	if (!rgmii) {
+		rgmii = kmalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL);
+
+		if (rgmii == NULL) {
+			printk(KERN_ERR
+			       "rgmii%d: Out of memory allocating RGMII structure!\n",
+			       rgmii_dev->def->index);
+			return -ENOMEM;
+		}
+
+		memset(rgmii, 0, sizeof(*rgmii));
+
+		rgmii->base =
+		    (struct rgmii_regs *)ioremap(rgmii_dev->def->paddr,
+						 sizeof(*rgmii->base));
+		if (rgmii->base == NULL) {
+			printk(KERN_ERR
+			       "rgmii%d: Cannot ioremap bridge registers!\n",
+			       rgmii_dev->def->index);
+
+			kfree(rgmii);
+			return -ENOMEM;
+		}
+		ocp_set_drvdata(rgmii_dev, rgmii);
+	}
+
+	if (phy_mode) {
+		switch (phy_mode) {
+		case PHY_MODE_GMII:
+			mode = GMII;
+			break;
+		case PHY_MODE_TBI:
+			mode = TBI;
+			break;
+		case PHY_MODE_RTBI:
+			mode = RTBI;
+			break;
+		case PHY_MODE_RGMII:
+		default:
+			mode = RGMII;
+		}
+		rgmii->base->fer &= ~RGMII_FER_MASK(input);
+		rgmii->base->fer |= rgmii_enable[mode] << (4 * input);
+	} else {
+		switch ((rgmii->base->fer & RGMII_FER_MASK(input)) >> (4 *
+								       input)) {
+		case RGMII_RTBI:
+			mode = RTBI;
+			break;
+		case RGMII_RGMII:
+			mode = RGMII;
+			break;
+		case RGMII_TBI:
+			mode = TBI;
+			break;
+		case RGMII_GMII:
+			mode = GMII;
+		}
+	}
+
+	/* Set mode to RGMII if nothing valid is detected */
+	if (mode < 0)
+		mode = RGMII;
+
+	printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n",
+	       rgmii_dev->def->index, input, mode_name[mode]);
+
+	rgmii->mode[input] = mode;
+	rgmii->users++;
+
+	return 0;
+}
+
+static void
+emac_rgmii_port_speed(struct ocp_device *ocpdev, int input, int speed)
+{
+	struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev);
+	unsigned int rgmii_speed;
+
+	rgmii_speed = in_be32(&rgmii->base->ssr);
+
+	rgmii_speed &= ~rgmii_speed_mask[input];
+
+	if (speed == 1000)
+		rgmii_speed |= rgmii_speed1000[input];
+	else if (speed == 100)
+		rgmii_speed |= rgmii_speed100[input];
+
+	out_be32(&rgmii->base->ssr, rgmii_speed);
+}
+
+static void emac_close_rgmii(struct ocp_device *ocpdev)
+{
+	struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev);
+	BUG_ON(!rgmii || rgmii->users == 0);
+
+	if (!--rgmii->users) {
+		ocp_set_drvdata(ocpdev, NULL);
+		iounmap((void *)rgmii->base);
+		kfree(rgmii);
+	}
+}
+
+static int emac_init_zmii(struct ocp_device *zmii_dev, int input, int phy_mode)
+{
+	struct ibm_ocp_zmii *zmii = ZMII_PRIV(zmii_dev);
+	const char *mode_name[] = { "SMII", "RMII", "MII" };
+	int mode = -1;
+
+	if (!zmii) {
+		zmii = kmalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
+		if (zmii == NULL) {
+			printk(KERN_ERR
+			       "zmii%d: Out of memory allocating ZMII structure!\n",
+			       zmii_dev->def->index);
+			return -ENOMEM;
+		}
+		memset(zmii, 0, sizeof(*zmii));
+
+		zmii->base =
+		    (struct zmii_regs *)ioremap(zmii_dev->def->paddr,
+						sizeof(*zmii->base));
+		if (zmii->base == NULL) {
+			printk(KERN_ERR
+			       "zmii%d: Cannot ioremap bridge registers!\n",
+			       zmii_dev->def->index);
+
+			kfree(zmii);
+			return -ENOMEM;
+		}
+		ocp_set_drvdata(zmii_dev, zmii);
+	}
+
+	if (phy_mode) {
+		switch (phy_mode) {
+		case PHY_MODE_MII:
+			mode = MII;
+			break;
+		case PHY_MODE_RMII:
+			mode = RMII;
+			break;
+		case PHY_MODE_SMII:
+		default:
+			mode = SMII;
+		}
+		zmii->base->fer &= ~ZMII_FER_MASK(input);
+		zmii->base->fer |= zmii_enable[input][mode];
+	} else {
+		switch ((zmii->base->fer & ZMII_FER_MASK(input)) << (4 * input)) {
+		case ZMII_MII0:
+			mode = MII;
+			break;
+		case ZMII_RMII0:
+			mode = RMII;
+			break;
+		case ZMII_SMII0:
+			mode = SMII;
+		}
+	}
+
+	/* Set mode to SMII if nothing valid is detected */
+	if (mode < 0)
+		mode = SMII;
+
+	printk(KERN_NOTICE "zmii%d: input %d in %s mode\n",
+	       zmii_dev->def->index, input, mode_name[mode]);
+
+	zmii->mode[input] = mode;
+	zmii->users++;
+
+	return 0;
+}
+
+static void emac_enable_zmii_port(struct ocp_device *ocpdev, int input)
+{
+	u32 mask;
+	struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
+
+	mask = in_be32(&zmii->base->fer);
+	mask &= zmii_enable[input][MDI];	/* turn all non enabled MDI's off */
+	mask |= zmii_enable[input][zmii->mode[input]] | mdi_enable[input];
+	out_be32(&zmii->base->fer, mask);
+}
+
+static void
+emac_zmii_port_speed(struct ocp_device *ocpdev, int input, int speed)
+{
+	struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
+
+	if (speed == 100)
+		zmii_speed |= zmii_speed100[input];
+	else
+		zmii_speed &= ~zmii_speed100[input];
+
+	out_be32(&zmii->base->ssr, zmii_speed);
+}
+
+static void emac_close_zmii(struct ocp_device *ocpdev)
+{
+	struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
+	BUG_ON(!zmii || zmii->users == 0);
+
+	if (!--zmii->users) {
+		ocp_set_drvdata(ocpdev, NULL);
+		iounmap((void *)zmii->base);
+		kfree(zmii);
+	}
+}
+
+int emac_phy_read(struct net_device *dev, int mii_id, int reg)
+{
+	int count;
+	uint32_t stacr;
+	struct ocp_enet_private *fep = dev->priv;
+	emac_t *emacp = fep->emacp;
+
+	MDIO_DEBUG(("%s: phy_read, id: 0x%x, reg: 0x%x\n", dev->name, mii_id,
+		    reg));
+
+	/* Enable proper ZMII port */
+	if (fep->zmii_dev)
+		emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input);
+
+	/* Use the EMAC that has the MDIO port */
+	if (fep->mdio_dev) {
+		dev = fep->mdio_dev;
+		fep = dev->priv;
+		emacp = fep->emacp;
+	}
+
+	count = 0;
+	while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
+					&& (count++ < MDIO_DELAY))
+		udelay(1);
+	MDIO_DEBUG((" (count was %d)\n", count));
+
+	if ((stacr & EMAC_STACR_OC) == 0) {
+		printk(KERN_WARNING "%s: PHY read timeout #1!\n", dev->name);
+		return -1;
+	}
+
+	/* Clear the speed bits and make a read request to the PHY */
+	stacr = ((EMAC_STACR_READ | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
+	stacr |= ((mii_id & 0x1F) << 5);
+
+	out_be32(&emacp->em0stacr, stacr);
+
+	count = 0;
+	while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
+					&& (count++ < MDIO_DELAY))
+		udelay(1);
+	MDIO_DEBUG((" (count was %d)\n", count));
+
+	if ((stacr & EMAC_STACR_OC) == 0) {
+		printk(KERN_WARNING "%s: PHY read timeout #2!\n", dev->name);
+		return -1;
+	}
+
+	/* Check for a read error */
+	if (stacr & EMAC_STACR_PHYE) {
+		MDIO_DEBUG(("EMAC MDIO PHY error !\n"));
+		return -1;
+	}
+
+	MDIO_DEBUG((" -> 0x%x\n", stacr >> 16));
+
+	return (stacr >> 16);
+}
+
+void emac_phy_write(struct net_device *dev, int mii_id, int reg, int data)
+{
+	int count;
+	uint32_t stacr;
+	struct ocp_enet_private *fep = dev->priv;
+	emac_t *emacp = fep->emacp;
+
+	MDIO_DEBUG(("%s phy_write, id: 0x%x, reg: 0x%x, data: 0x%x\n",
+		    dev->name, mii_id, reg, data));
+
+	/* Enable proper ZMII port */
+	if (fep->zmii_dev)
+		emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input);
+
+	/* Use the EMAC that has the MDIO port */
+	if (fep->mdio_dev) {
+		dev = fep->mdio_dev;
+		fep = dev->priv;
+		emacp = fep->emacp;
+	}
+
+	count = 0;
+	while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
+					&& (count++ < MDIO_DELAY))
+		udelay(1);
+	MDIO_DEBUG((" (count was %d)\n", count));
+
+	if ((stacr & EMAC_STACR_OC) == 0) {
+		printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
+		return;
+	}
+
+	/* Clear the speed bits and make a read request to the PHY */
+
+	stacr = ((EMAC_STACR_WRITE | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
+	stacr |= ((mii_id & 0x1f) << 5) | ((data & 0xffff) << 16);
+
+	out_be32(&emacp->em0stacr, stacr);
+
+	count = 0;
+	while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
+					&& (count++ < MDIO_DELAY))
+		udelay(1);
+	MDIO_DEBUG((" (count was %d)\n", count));
+
+	if ((stacr & EMAC_STACR_OC) == 0)
+		printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
+
+	/* Check for a write error */
+	if ((stacr & EMAC_STACR_PHYE) != 0) {
+		MDIO_DEBUG(("EMAC MDIO PHY error !\n"));
+	}
+}
+
+static void emac_txeob_dev(void *param, u32 chanmask)
+{
+	struct net_device *dev = param;
+	struct ocp_enet_private *fep = dev->priv;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fep->lock, flags);
+
+	PKT_DEBUG(("emac_txeob_dev() entry, tx_cnt: %d\n", fep->tx_cnt));
+
+	while (fep->tx_cnt &&
+	       !(fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_READY)) {
+
+		if (fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_LAST) {
+			/* Tell the system the transmit completed. */
+			dma_unmap_single(&fep->ocpdev->dev,
+					 fep->tx_desc[fep->ack_slot].data_ptr,
+					 fep->tx_desc[fep->ack_slot].data_len,
+					 DMA_TO_DEVICE);
+			dev_kfree_skb_irq(fep->tx_skb[fep->ack_slot]);
+
+			if (fep->tx_desc[fep->ack_slot].ctrl &
+			    (EMAC_TX_ST_EC | EMAC_TX_ST_MC | EMAC_TX_ST_SC))
+				fep->stats.collisions++;
+		}
+
+		fep->tx_skb[fep->ack_slot] = (struct sk_buff *)NULL;
+		if (++fep->ack_slot == NUM_TX_BUFF)
+			fep->ack_slot = 0;
+
+		fep->tx_cnt--;
+	}
+	if (fep->tx_cnt < NUM_TX_BUFF)
+		netif_wake_queue(dev);
+
+	PKT_DEBUG(("emac_txeob_dev() exit, tx_cnt: %d\n", fep->tx_cnt));
+
+	spin_unlock_irqrestore(&fep->lock, flags);
+}
+
+/*
+  Fill/Re-fill the rx chain with valid ctrl/ptrs.
+  This function will fill from rx_slot up to the parm end.
+  So to completely fill the chain pre-set rx_slot to 0 and
+  pass in an end of 0.
+ */
+static void emac_rx_fill(struct net_device *dev, int end)
+{
+	int i;
+	struct ocp_enet_private *fep = dev->priv;
+
+	i = fep->rx_slot;
+	do {
+		/* We don't want the 16 bytes skb_reserve done by dev_alloc_skb,
+		 * it breaks our cache line alignement. However, we still allocate
+		 * +16 so that we end up allocating the exact same size as
+		 * dev_alloc_skb() would do.
+		 * Also, because of the skb_res, the max DMA size we give to EMAC
+		 * is slighly wrong, causing it to potentially DMA 2 more bytes
+		 * from a broken/oversized packet. These 16 bytes will take care
+		 * that we don't walk on somebody else toes with that.
+		 */
+		fep->rx_skb[i] =
+		    alloc_skb(fep->rx_buffer_size + 16, GFP_ATOMIC);
+
+		if (fep->rx_skb[i] == NULL) {
+			/* Keep rx_slot here, the next time clean/fill is called
+			 * we will try again before the MAL wraps back here
+			 * If the MAL tries to use this descriptor with
+			 * the EMPTY bit off it will cause the
+			 * rxde interrupt.  That is where we will
+			 * try again to allocate an sk_buff.
+			 */
+			break;
+
+		}
+
+		if (skb_res)
+			skb_reserve(fep->rx_skb[i], skb_res);
+
+		/* We must NOT dma_map_single the cache line right after the
+		 * buffer, so we must crop our sync size to account for the
+		 * reserved space
+		 */
+		fep->rx_desc[i].data_ptr =
+		    (unsigned char *)dma_map_single(&fep->ocpdev->dev,
+						    (void *)fep->rx_skb[i]->
+						    data,
+						    fep->rx_buffer_size -
+						    skb_res, DMA_FROM_DEVICE);
+
+		/*
+		 * Some 4xx implementations use the previously
+		 * reserved bits in data_len to encode the MS
+		 * 4-bits of a 36-bit physical address (ERPN)
+		 * This must be initialized.
+		 */
+		fep->rx_desc[i].data_len = 0;
+		fep->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR |
+		    (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
+
+	} while ((i = (i + 1) % NUM_RX_BUFF) != end);
+
+	fep->rx_slot = i;
+}
+
+static void
+emac_rx_csum(struct net_device *dev, unsigned short ctrl, struct sk_buff *skb)
+{
+	struct ocp_enet_private *fep = dev->priv;
+
+	/* Exit if interface has no TAH engine */
+	if (!fep->tah_dev) {
+		skb->ip_summed = CHECKSUM_NONE;
+		return;
+	}
+
+	/* Check for TCP/UDP/IP csum error */
+	if (ctrl & EMAC_CSUM_VER_ERROR) {
+		/* Let the stack verify checksum errors */
+		skb->ip_summed = CHECKSUM_NONE;
+/*		adapter->hw_csum_err++; */
+	} else {
+		/* Csum is good */
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+/*		adapter->hw_csum_good++; */
+	}
+}
+
+static int emac_rx_clean(struct net_device *dev)
+{
+	int i, b, bnum = 0, buf[6];
+	int error, frame_length;
+	struct ocp_enet_private *fep = dev->priv;
+	unsigned short ctrl;
+
+	i = fep->rx_slot;
+
+	PKT_DEBUG(("emac_rx_clean() entry, rx_slot: %d\n", fep->rx_slot));
+
+	do {
+		if (fep->rx_skb[i] == NULL)
+			continue;	/*we have already handled the packet but haved failed to alloc */
+		/* 
+		   since rx_desc is in uncached mem we don't keep reading it directly 
+		   we pull out a local copy of ctrl and do the checks on the copy.
+		 */
+		ctrl = fep->rx_desc[i].ctrl;
+		if (ctrl & MAL_RX_CTRL_EMPTY)
+			break;	/*we don't have any more ready packets */
+
+		if (EMAC_IS_BAD_RX_PACKET(ctrl)) {
+			fep->stats.rx_errors++;
+			fep->stats.rx_dropped++;
+
+			if (ctrl & EMAC_RX_ST_OE)
+				fep->stats.rx_fifo_errors++;
+			if (ctrl & EMAC_RX_ST_AE)
+				fep->stats.rx_frame_errors++;
+			if (ctrl & EMAC_RX_ST_BFCS)
+				fep->stats.rx_crc_errors++;
+			if (ctrl & (EMAC_RX_ST_RP | EMAC_RX_ST_PTL |
+				    EMAC_RX_ST_ORE | EMAC_RX_ST_IRE))
+				fep->stats.rx_length_errors++;
+		} else {
+			if ((ctrl & (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) ==
+			    (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) {
+				/* Single descriptor packet */
+				emac_rx_csum(dev, ctrl, fep->rx_skb[i]);
+				/* Send the skb up the chain. */
+				frame_length = fep->rx_desc[i].data_len - 4;
+				skb_put(fep->rx_skb[i], frame_length);
+				fep->rx_skb[i]->dev = dev;
+				fep->rx_skb[i]->protocol =
+				    eth_type_trans(fep->rx_skb[i], dev);
+				error = netif_rx(fep->rx_skb[i]);
+
+				if ((error == NET_RX_DROP) ||
+				    (error == NET_RX_BAD)) {
+					fep->stats.rx_dropped++;
+				} else {
+					fep->stats.rx_packets++;
+					fep->stats.rx_bytes += frame_length;
+				}
+				fep->rx_skb[i] = NULL;
+			} else {
+				/* Multiple descriptor packet */
+				if (ctrl & MAL_RX_CTRL_FIRST) {
+					if (fep->rx_desc[(i + 1) % NUM_RX_BUFF].
+					    ctrl & MAL_RX_CTRL_EMPTY)
+						break;
+					bnum = 0;
+					buf[bnum] = i;
+					++bnum;
+					continue;
+				}
+				if (((ctrl & MAL_RX_CTRL_FIRST) !=
+				     MAL_RX_CTRL_FIRST) &&
+				    ((ctrl & MAL_RX_CTRL_LAST) !=
+				     MAL_RX_CTRL_LAST)) {
+					if (fep->rx_desc[(i + 1) %
+							 NUM_RX_BUFF].ctrl &
+					    MAL_RX_CTRL_EMPTY) {
+						i = buf[0];
+						break;
+					}
+					buf[bnum] = i;
+					++bnum;
+					continue;
+				}
+				if (ctrl & MAL_RX_CTRL_LAST) {
+					buf[bnum] = i;
+					++bnum;
+					skb_put(fep->rx_skb[buf[0]],
+						fep->rx_desc[buf[0]].data_len);
+					for (b = 1; b < bnum; b++) {
+						/*
+						 * MAL is braindead, we need
+						 * to copy the remainder
+						 * of the packet from the
+						 * latter descriptor buffers
+						 * to the first skb. Then
+						 * dispose of the source
+						 * skbs.
+						 *
+						 * Once the stack is fixed
+						 * to handle frags on most
+						 * protocols we can generate
+						 * a fragmented skb with
+						 * no copies.
+						 */
+						memcpy(fep->rx_skb[buf[0]]->
+						       data +
+						       fep->rx_skb[buf[0]]->len,
+						       fep->rx_skb[buf[b]]->
+						       data,
+						       fep->rx_desc[buf[b]].
+						       data_len);
+						skb_put(fep->rx_skb[buf[0]],
+							fep->rx_desc[buf[b]].
+							data_len);
+						dma_unmap_single(&fep->ocpdev->
+								 dev,
+								 fep->
+								 rx_desc[buf
+									 [b]].
+								 data_ptr,
+								 fep->
+								 rx_desc[buf
+									 [b]].
+								 data_len,
+								 DMA_FROM_DEVICE);
+						dev_kfree_skb(fep->
+							      rx_skb[buf[b]]);
+					}
+					emac_rx_c