Merge ../linux-2.6 by hand

16 files changed, 4028 insertions, 2801 deletions

diff --git a/drivers/net/ibm_emac/Makefile b/drivers/net/ibm_emac/Makefile
index 7f583a333c2..f98ddf0e807 100644
--- a/drivers/net/ibm_emac/Makefile
+++ b/drivers/net/ibm_emac/Makefile
@@ -1,12 +1,11 @@
 #
-# Makefile for the IBM PPC4xx EMAC controllers
+# Makefile for the PowerPC 4xx on-chip ethernet driver
 #
 
 obj-$(CONFIG_IBM_EMAC) += ibm_emac.o
 
-ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o
-
-# Only need this if you want to see additional debug messages
-ifeq ($(CONFIG_IBM_EMAC_ERRMSG), y)
-ibm_emac-objs += ibm_emac_debug.o
-endif
+ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o 
+ibm_emac-$(CONFIG_IBM_EMAC_ZMII) += ibm_emac_zmii.o
+ibm_emac-$(CONFIG_IBM_EMAC_RGMII) += ibm_emac_rgmii.o
+ibm_emac-$(CONFIG_IBM_EMAC_TAH) += ibm_emac_tah.o
+ibm_emac-$(CONFIG_IBM_EMAC_DEBUG) += ibm_emac_debug.o
diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h
index 15d5a0e8286..28c476f28c2 100644
--- a/drivers/net/ibm_emac/ibm_emac.h
+++ b/drivers/net/ibm_emac/ibm_emac.h
@@ -1,110 +1,142 @@
 /*
- * ibm_emac.h
+ * drivers/net/ibm_emac/ibm_emac.h
  *
+ * Register definitions for PowerPC 4xx on-chip ethernet contoller
  *
- *      Armin Kuster akuster@mvista.com
- *      June, 2002
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
  *
- * Copyright 2002 MontaVista Softare Inc.
+ * Based on original work by
+ *      Matt Porter <mporter@kernel.crashing.org>
+ *      Armin Kuster <akuster@mvista.com>
+ * 	Copyright 2002-2004 MontaVista Software Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
+ *
  */
+#ifndef __IBM_EMAC_H_
+#define __IBM_EMAC_H_
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+/* This is a simple check to prevent use of this driver on non-tested SoCs */
+#if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \
+    !defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \
+    !defined(CONFIG_440EP) && !defined(CONFIG_NP405H)
+#error	"Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK"
+#endif
+
+/* EMAC registers 		Write Access rules */
+struct emac_regs {
+	u32 mr0;		/* special 	*/
+	u32 mr1;		/* Reset 	*/
+	u32 tmr0;		/* special 	*/
+	u32 tmr1;		/* special 	*/
+	u32 rmr;		/* Reset 	*/
+	u32 isr;		/* Always 	*/
+	u32 iser;		/* Reset 	*/
+	u32 iahr;		/* Reset, R, T 	*/
+	u32 ialr;		/* Reset, R, T 	*/
+	u32 vtpid;		/* Reset, R, T 	*/
+	u32 vtci;		/* Reset, R, T 	*/
+	u32 ptr;		/* Reset,    T 	*/
+	u32 iaht1;		/* Reset, R	*/
+	u32 iaht2;		/* Reset, R	*/
+	u32 iaht3;		/* Reset, R	*/
+	u32 iaht4;		/* Reset, R	*/
+	u32 gaht1;		/* Reset, R	*/
+	u32 gaht2;		/* Reset, R	*/
+	u32 gaht3;		/* Reset, R	*/
+	u32 gaht4;		/* Reset, R	*/
+	u32 lsah;
+	u32 lsal;
+	u32 ipgvr;		/* Reset,    T 	*/
+	u32 stacr;		/* special 	*/
+	u32 trtr;		/* special 	*/
+	u32 rwmr;		/* Reset 	*/
+	u32 octx;
+	u32 ocrx;
+	u32 ipcr;
+};
+
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_ETHTOOL_REGS_VER		0
+#define EMAC_ETHTOOL_REGS_SIZE		(sizeof(struct emac_regs) - sizeof(u32))
+#else
+#define EMAC_ETHTOOL_REGS_VER		1
+#define EMAC_ETHTOOL_REGS_SIZE		sizeof(struct emac_regs)
+#endif
 
-#ifndef _IBM_EMAC_H_
-#define _IBM_EMAC_H_
-/* General defines needed for the driver */
+/* EMACx_MR0 */
+#define EMAC_MR0_RXI			0x80000000
+#define EMAC_MR0_TXI			0x40000000
+#define EMAC_MR0_SRST			0x20000000
+#define EMAC_MR0_TXE			0x10000000
+#define EMAC_MR0_RXE			0x08000000
+#define EMAC_MR0_WKE			0x04000000
 
-/* Emac */
-typedef struct emac_regs {
-	u32 em0mr0;
-	u32 em0mr1;
-	u32 em0tmr0;
-	u32 em0tmr1;
-	u32 em0rmr;
-	u32 em0isr;
-	u32 em0iser;
-	u32 em0iahr;
-	u32 em0ialr;
-	u32 em0vtpid;
-	u32 em0vtci;
-	u32 em0ptr;
-	u32 em0iaht1;
-	u32 em0iaht2;
-	u32 em0iaht3;
-	u32 em0iaht4;
-	u32 em0gaht1;
-	u32 em0gaht2;
-	u32 em0gaht3;
-	u32 em0gaht4;
-	u32 em0lsah;
-	u32 em0lsal;
-	u32 em0ipgvr;
-	u32 em0stacr;
-	u32 em0trtr;
-	u32 em0rwmr;
-} emac_t;
+/* EMACx_MR1 */
+#define EMAC_MR1_FDE			0x80000000
+#define EMAC_MR1_ILE			0x40000000
+#define EMAC_MR1_VLE			0x20000000
+#define EMAC_MR1_EIFC			0x10000000
+#define EMAC_MR1_APP			0x08000000
+#define EMAC_MR1_IST			0x01000000
 
-/* MODE REG 0 */
-#define EMAC_M0_RXI			0x80000000
-#define EMAC_M0_TXI			0x40000000
-#define EMAC_M0_SRST			0x20000000
-#define EMAC_M0_TXE			0x10000000
-#define EMAC_M0_RXE			0x08000000
-#define EMAC_M0_WKE			0x04000000
+#define EMAC_MR1_MF_MASK		0x00c00000
+#define EMAC_MR1_MF_10			0x00000000
+#define EMAC_MR1_MF_100			0x00400000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_MR1_MF_1000		0x00000000
+#define EMAC_MR1_MF_1000GPCS		0x00000000
+#define EMAC_MR1_MF_IPPA(id)		0x00000000
+#else
+#define EMAC_MR1_MF_1000		0x00800000
+#define EMAC_MR1_MF_1000GPCS		0x00c00000
+#define EMAC_MR1_MF_IPPA(id)		(((id) & 0x1f) << 6)
+#endif
 
-/* MODE Reg 1 */
-#define EMAC_M1_FDE			0x80000000
-#define EMAC_M1_ILE			0x40000000
-#define EMAC_M1_VLE			0x20000000
-#define EMAC_M1_EIFC			0x10000000
-#define EMAC_M1_APP			0x08000000
-#define EMAC_M1_AEMI			0x02000000
-#define EMAC_M1_IST			0x01000000
-#define EMAC_M1_MF_1000GPCS		0x00c00000	/* Internal GPCS */
-#define EMAC_M1_MF_1000MBPS		0x00800000	/* External GPCS */
-#define EMAC_M1_MF_100MBPS		0x00400000
-#define EMAC_M1_RFS_16K                 0x00280000	/* 000 for 512 byte */
-#define EMAC_M1_TR			0x00008000
-#ifdef CONFIG_IBM_EMAC4
-#define EMAC_M1_RFS_8K                  0x00200000
-#define EMAC_M1_RFS_4K                  0x00180000
-#define EMAC_M1_RFS_2K                  0x00100000
-#define EMAC_M1_RFS_1K                  0x00080000
-#define EMAC_M1_TX_FIFO_16K             0x00050000	/* 0's for 512 byte */
-#define EMAC_M1_TX_FIFO_8K              0x00040000
-#define EMAC_M1_TX_FIFO_4K              0x00030000
-#define EMAC_M1_TX_FIFO_2K              0x00020000
-#define EMAC_M1_TX_FIFO_1K              0x00010000
-#define EMAC_M1_TX_TR                   0x00008000
-#define EMAC_M1_TX_MWSW                 0x00001000	/* 0 wait for status */
-#define EMAC_M1_JUMBO_ENABLE            0x00000800	/* Upt to 9Kr status */
-#define EMAC_M1_OPB_CLK_66              0x00000008	/* 66Mhz */
-#define EMAC_M1_OPB_CLK_83              0x00000010	/* 83Mhz */
-#define EMAC_M1_OPB_CLK_100             0x00000018	/* 100Mhz */
-#define EMAC_M1_OPB_CLK_100P            0x00000020	/* 100Mhz+ */
-#else				/* CONFIG_IBM_EMAC4 */
-#define EMAC_M1_RFS_4K			0x00300000	/* ~4k for 512 byte */
-#define EMAC_M1_RFS_2K			0x00200000
-#define EMAC_M1_RFS_1K			0x00100000
-#define EMAC_M1_TX_FIFO_2K		0x00080000	/* 0's for 512 byte */
-#define EMAC_M1_TX_FIFO_1K		0x00040000
-#define EMAC_M1_TR0_DEPEND		0x00010000	/* 0'x for single packet */
-#define EMAC_M1_TR1_DEPEND		0x00004000
-#define EMAC_M1_TR1_MULTI		0x00002000
-#define EMAC_M1_JUMBO_ENABLE		0x00001000
-#endif				/* CONFIG_IBM_EMAC4 */
-#define EMAC_M1_BASE			(EMAC_M1_TX_FIFO_2K | \
-					EMAC_M1_APP | \
-					EMAC_M1_TR | EMAC_M1_VLE)
+#define EMAC_TX_FIFO_SIZE		2048
 
-/* Transmit Mode Register 0 */
-#define EMAC_TMR0_GNP0			0x80000000
-#define EMAC_TMR0_GNP1			0x40000000
-#define EMAC_TMR0_GNPD			0x20000000
-#define EMAC_TMR0_FC			0x10000000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_MR1_RFS_4K			0x00300000
+#define EMAC_MR1_RFS_16K		0x00000000
+#define EMAC_RX_FIFO_SIZE(gige)		4096
+#define EMAC_MR1_TFS_2K			0x00080000
+#define EMAC_MR1_TR0_MULT		0x00008000
+#define EMAC_MR1_JPSM			0x00000000
+#define EMAC_MR1_BASE(opb)		(EMAC_MR1_TFS_2K | EMAC_MR1_TR0_MULT)
+#else
+#define EMAC_MR1_RFS_4K			0x00180000
+#define EMAC_MR1_RFS_16K		0x00280000
+#define EMAC_RX_FIFO_SIZE(gige)		((gige) ? 16384 : 4096)
+#define EMAC_MR1_TFS_2K			0x00020000
+#define EMAC_MR1_TR			0x00008000
+#define EMAC_MR1_MWSW_001		0x00001000
+#define EMAC_MR1_JPSM			0x00000800
+#define EMAC_MR1_OBCI_MASK		0x00000038
+#define EMAC_MR1_OBCI_50		0x00000000
+#define EMAC_MR1_OBCI_66		0x00000008
+#define EMAC_MR1_OBCI_83		0x00000010
+#define EMAC_MR1_OBCI_100		0x00000018
+#define EMAC_MR1_OBCI_100P		0x00000020
+#define EMAC_MR1_OBCI(freq)		((freq) <= 50  ? EMAC_MR1_OBCI_50 : \
+					 (freq) <= 66  ? EMAC_MR1_OBCI_66 : \
+					 (freq) <= 83  ? EMAC_MR1_OBCI_83 : \
+					 (freq) <= 100 ? EMAC_MR1_OBCI_100 : EMAC_MR1_OBCI_100P)
+#define EMAC_MR1_BASE(opb)		(EMAC_MR1_TFS_2K | EMAC_MR1_TR | \
+					 EMAC_MR1_MWSW_001 | EMAC_MR1_OBCI(opb))
+#endif
+
+/* EMACx_TMR0 */
+#define EMAC_TMR0_GNP			0x80000000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_TMR0_DEFAULT		0x00000000	
+#else
 #define EMAC_TMR0_TFAE_2_32		0x00000001
 #define EMAC_TMR0_TFAE_4_64		0x00000002
 #define EMAC_TMR0_TFAE_8_128		0x00000003
@@ -112,14 +144,36 @@ typedef struct emac_regs {
 #define EMAC_TMR0_TFAE_32_512		0x00000005
 #define EMAC_TMR0_TFAE_64_1024		0x00000006
 #define EMAC_TMR0_TFAE_128_2048		0x00000007
+#define EMAC_TMR0_DEFAULT		EMAC_TMR0_TFAE_2_32
+#endif
+#define EMAC_TMR0_XMIT			(EMAC_TMR0_GNP | EMAC_TMR0_DEFAULT)
+
+/* EMACx_TMR1 */
+
+/* IBM manuals are not very clear here. 
+ * This is my interpretation of how things are. --ebs
+ */
+#if defined(CONFIG_40x)
+#define EMAC_FIFO_ENTRY_SIZE		8
+#define EMAC_MAL_BURST_SIZE		(16 * 4)
+#else
+#define EMAC_FIFO_ENTRY_SIZE		16
+#define EMAC_MAL_BURST_SIZE		(64 * 4)
+#endif
+
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_TMR1(l,h)			(((l) << 27) | (((h) & 0xff) << 16))
+#else
+#define EMAC_TMR1(l,h)			(((l) << 27) | (((h) & 0x3ff) << 14))
+#endif
 
-/* Receive Mode Register */
+/* EMACx_RMR */
 #define EMAC_RMR_SP			0x80000000
 #define EMAC_RMR_SFCS			0x40000000
-#define EMAC_RMR_ARRP			0x20000000
-#define EMAC_RMR_ARP			0x10000000
-#define EMAC_RMR_AROP			0x08000000
-#define EMAC_RMR_ARPI			0x04000000
+#define EMAC_RMR_RRP			0x20000000
+#define EMAC_RMR_RFP			0x10000000
+#define EMAC_RMR_ROP			0x08000000
+#define EMAC_RMR_RPIR			0x04000000
 #define EMAC_RMR_PPP			0x02000000
 #define EMAC_RMR_PME			0x01000000
 #define EMAC_RMR_PMME			0x00800000
@@ -127,6 +181,9 @@ typedef struct emac_regs {
 #define EMAC_RMR_MIAE			0x00200000
 #define EMAC_RMR_BAE			0x00100000
 #define EMAC_RMR_MAE			0x00080000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_RMR_BASE			0x00000000
+#else
 #define EMAC_RMR_RFAF_2_32		0x00000001
 #define EMAC_RMR_RFAF_4_64		0x00000002
 #define EMAC_RMR_RFAF_8_128		0x00000003
@@ -134,9 +191,21 @@ typedef struct emac_regs {
 #define EMAC_RMR_RFAF_32_512		0x00000005
 #define EMAC_RMR_RFAF_64_1024		0x00000006
 #define EMAC_RMR_RFAF_128_2048		0x00000007
-#define EMAC_RMR_BASE			(EMAC_RMR_IAE | EMAC_RMR_BAE)
+#define EMAC_RMR_BASE			EMAC_RMR_RFAF_128_2048
+#endif
 
-/* Interrupt Status & enable Regs */
+/* EMACx_ISR & EMACx_ISER */
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_ISR_TXPE			0x00000000
+#define EMAC_ISR_RXPE			0x00000000
+#define EMAC_ISR_TXUE			0x00000000
+#define EMAC_ISR_RXOE			0x00000000
+#else
+#define EMAC_ISR_TXPE			0x20000000
+#define EMAC_ISR_RXPE			0x10000000
+#define EMAC_ISR_TXUE			0x08000000
+#define EMAC_ISR_RXOE			0x04000000
+#endif
 #define EMAC_ISR_OVR			0x02000000
 #define EMAC_ISR_PP			0x01000000
 #define EMAC_ISR_BP			0x00800000
@@ -147,53 +216,62 @@ typedef struct emac_regs {
 #define EMAC_ISR_PTLE			0x00040000
 #define EMAC_ISR_ORE			0x00020000
 #define EMAC_ISR_IRE			0x00010000
-#define EMAC_ISR_DBDM			0x00000200
-#define EMAC_ISR_DB0			0x00000100
-#define EMAC_ISR_SE0			0x00000080
-#define EMAC_ISR_TE0			0x00000040
-#define EMAC_ISR_DB1			0x00000020
-#define EMAC_ISR_SE1			0x00000010
-#define EMAC_ISR_TE1			0x00000008
+#define EMAC_ISR_SQE			0x00000080
+#define EMAC_ISR_TE			0x00000040
 #define EMAC_ISR_MOS			0x00000002
 #define EMAC_ISR_MOF			0x00000001
 
-/* STA CONTROL REG */
+/* EMACx_STACR */
+#define EMAC_STACR_PHYD_MASK		0xffff
+#define EMAC_STACR_PHYD_SHIFT		16
 #define EMAC_STACR_OC			0x00008000
 #define EMAC_STACR_PHYE			0x00004000
-#define EMAC_STACR_WRITE		0x00002000
-#define EMAC_STACR_READ			0x00001000
-#define EMAC_STACR_CLK_83MHZ		0x00000800	/* 0's for 50Mhz */
-#define EMAC_STACR_CLK_66MHZ		0x00000400
-#define EMAC_STACR_CLK_100MHZ		0x00000C00
+#define EMAC_STACR_STAC_MASK		0x00003000
+#define EMAC_STACR_STAC_READ		0x00001000
+#define EMAC_STACR_STAC_WRITE		0x00002000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_STACR_OPBC_MASK		0x00000C00
+#define EMAC_STACR_OPBC_50		0x00000000
+#define EMAC_STACR_OPBC_66		0x00000400
+#define EMAC_STACR_OPBC_83		0x00000800
+#define EMAC_STACR_OPBC_100		0x00000C00
+#define EMAC_STACR_OPBC(freq)		((freq) <= 50 ? EMAC_STACR_OPBC_50 : \
+					 (freq) <= 66 ? EMAC_STACR_OPBC_66 : \
+					 (freq) <= 83 ? EMAC_STACR_OPBC_83 : EMAC_STACR_OPBC_100)
+#define EMAC_STACR_BASE(opb)		EMAC_STACR_OPBC(opb)
+#else
+#define EMAC_STACR_BASE(opb)		0x00000000
+#endif
+#define EMAC_STACR_PCDA_MASK		0x1f
+#define EMAC_STACR_PCDA_SHIFT		5
+#define EMAC_STACR_PRA_MASK		0x1f
+
+/* EMACx_TRTR */
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_TRTR_SHIFT			27
+#else
+#define EMAC_TRTR_SHIFT			24
+#endif
+#define EMAC_TRTR(size)			((((size) >> 6) - 1) << EMAC_TRTR_SHIFT)
 
-/* Transmit Request Threshold Register */
-#define EMAC_TRTR_1600			0x18000000	/* 0's for 64 Bytes */
-#define EMAC_TRTR_1024			0x0f000000
-#define EMAC_TRTR_512			0x07000000
-#define EMAC_TRTR_256			0x03000000
-#define EMAC_TRTR_192			0x10000000
-#define EMAC_TRTR_128			0x01000000
+/* EMACx_RWMR */
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_RWMR(l,h)			(((l) << 23) | ( ((h) & 0x1ff) << 7))	
+#else
+#define EMAC_RWMR(l,h)			(((l) << 22) | ( ((h) & 0x3ff) << 6))	
+#endif
 
+/* EMAC specific TX descriptor control fields (write access) */
 #define EMAC_TX_CTRL_GFCS		0x0200
 #define EMAC_TX_CTRL_GP			0x0100
 #define EMAC_TX_CTRL_ISA		0x0080
 #define EMAC_TX_CTRL_RSA		0x0040
 #define EMAC_TX_CTRL_IVT		0x0020
 #define EMAC_TX_CTRL_RVT		0x0010
-#define EMAC_TX_CTRL_TAH_CSUM		0x000e	/* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG4		0x000a	/* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG3		0x0008	/* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG2		0x0006	/* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG1		0x0004	/* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG0		0x0002	/* TAH only */
-#define EMAC_TX_CTRL_TAH_DIS		0x0000	/* TAH only */
+#define EMAC_TX_CTRL_TAH_CSUM		0x000e
 
-#define EMAC_TX_CTRL_DFLT ( \
-	MAL_TX_CTRL_INTR | EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP )
-
-/* madmal transmit status / Control bits */
+/* EMAC specific TX descriptor status fields (read access) */
 #define EMAC_TX_ST_BFCS			0x0200
-#define EMAC_TX_ST_BPP			0x0100
 #define EMAC_TX_ST_LCS			0x0080
 #define EMAC_TX_ST_ED			0x0040
 #define EMAC_TX_ST_EC			0x0020
@@ -202,8 +280,16 @@ typedef struct emac_regs {
 #define EMAC_TX_ST_SC			0x0004
 #define EMAC_TX_ST_UR			0x0002
 #define EMAC_TX_ST_SQE			0x0001
+#if !defined(CONFIG_IBM_EMAC_TAH)
+#define EMAC_IS_BAD_TX(v)		((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \
+					 EMAC_TX_ST_EC | EMAC_TX_ST_LC | \
+					 EMAC_TX_ST_MC | EMAC_TX_ST_UR))
+#else
+#define EMAC_IS_BAD_TX(v)		((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \
+					 EMAC_TX_ST_EC | EMAC_TX_ST_LC))
+#endif					 
 
-/* madmal receive status / Control bits */
+/* EMAC specific RX descriptor status fields (read access) */
 #define EMAC_RX_ST_OE			0x0200
 #define EMAC_RX_ST_PP			0x0100
 #define EMAC_RX_ST_BP			0x0080
@@ -214,54 +300,10 @@ typedef struct emac_regs {
 #define EMAC_RX_ST_PTL			0x0004
 #define EMAC_RX_ST_ORE			0x0002
 #define EMAC_RX_ST_IRE			0x0001
-#define EMAC_BAD_RX_PACKET		0x02ff
-#define EMAC_CSUM_VER_ERROR		0x0003
-
-/* identify a bad rx packet dependent on emac features */
-#ifdef CONFIG_IBM_EMAC4
-#define EMAC_IS_BAD_RX_PACKET(desc) \
-	(((desc & (EMAC_BAD_RX_PACKET & ~EMAC_CSUM_VER_ERROR)) || \
-	((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_ORE) || \
-	((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_IRE)))
-#else
-#define EMAC_IS_BAD_RX_PACKET(desc) \
-	 (desc & EMAC_BAD_RX_PACKET)
-#endif
-
-/* SoC implementation specific EMAC register defaults */
-#if defined(CONFIG_440GP)
-#define EMAC_RWMR_DEFAULT		0x80009000
-#define EMAC_TMR0_DEFAULT		0x00000000
-#define EMAC_TMR1_DEFAULT		0xf8640000
-#elif defined(CONFIG_440GX)
-#define EMAC_RWMR_DEFAULT		0x1000a200
-#define EMAC_TMR0_DEFAULT		EMAC_TMR0_TFAE_2_32
-#define EMAC_TMR1_DEFAULT		0xa00f0000
-#elif defined(CONFIG_440SP)
-#define EMAC_RWMR_DEFAULT		0x08002000
-#define EMAC_TMR0_DEFAULT		EMAC_TMR0_TFAE_128_2048
-#define EMAC_TMR1_DEFAULT		0xf8200000
-#else
-#define EMAC_RWMR_DEFAULT		0x0f002000
-#define EMAC_TMR0_DEFAULT		0x00000000
-#define EMAC_TMR1_DEFAULT		0x380f0000
-#endif				/* CONFIG_440GP */
-
-/* Revision specific EMAC register defaults */
-#ifdef CONFIG_IBM_EMAC4
-#define EMAC_M1_DEFAULT			(EMAC_M1_BASE | \
-					EMAC_M1_OPB_CLK_83 | \
-					EMAC_M1_TX_MWSW)
-#define EMAC_RMR_DEFAULT		(EMAC_RMR_BASE | \
-					EMAC_RMR_RFAF_128_2048)
-#define EMAC_TMR0_XMIT			(EMAC_TMR0_GNP0 | \
-					EMAC_TMR0_DEFAULT)
-#define EMAC_TRTR_DEFAULT		EMAC_TRTR_1024
-#else				/* !CONFIG_IBM_EMAC4 */
-#define EMAC_M1_DEFAULT			EMAC_M1_BASE
-#define EMAC_RMR_DEFAULT		EMAC_RMR_BASE
-#define EMAC_TMR0_XMIT			EMAC_TMR0_GNP0
-#define EMAC_TRTR_DEFAULT		EMAC_TRTR_1600
-#endif				/* CONFIG_IBM_EMAC4 */
-
-#endif
+#define EMAC_RX_TAH_BAD_CSUM		0x0003
+#define EMAC_BAD_RX_MASK		(EMAC_RX_ST_OE | EMAC_RX_ST_BP | \
+					 EMAC_RX_ST_RP | EMAC_RX_ST_SE | \
+					 EMAC_RX_ST_AE | EMAC_RX_ST_BFCS | \
+					 EMAC_RX_ST_PTL | EMAC_RX_ST_ORE | \
+					 EMAC_RX_ST_IRE )
+#endif /* __IBM_EMAC_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
index 14e9b6315f2..943fbd1546f 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -1,13 +1,14 @@
 /*
- * ibm_emac_core.c
+ * drivers/net/ibm_emac/ibm_emac_core.c
  *
- * Ethernet driver for the built in ethernet on the IBM 4xx PowerPC
- * processors.
- * 
- * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Driver for PowerPC 4xx on-chip ethernet controller.
  *
- * Based on original work by
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
  *
+ * Based on original work by
+ * 	Matt Porter <mporter@kernel.crashing.org>
+ *	(c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
  *      Armin Kuster <akuster@mvista.com>
  * 	Johnnie Peters <jpeters@mvista.com>
  *
@@ -15,29 +16,24 @@
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
- * TODO
- *       - Check for races in the "remove" code path
- *       - Add some Power Management to the MAC and the PHY
- *       - Audit remaining of non-rewritten code (--BenH)
- *       - Cleanup message display using msglevel mecanism
- *       - Address all errata
- *       - Audit all register update paths to ensure they
- *         are being written post soft reset if required.
+ *
  */
+
+#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ptrace.h>
 #include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/types.h>
-#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/crc32.h>
 #include <linux/ethtool.h>
 #include <linux/mii.h>
 #include <linux/bitops.h>
@@ -45,1691 +41,1893 @@
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/dma.h>
-#include <asm/irq.h>
 #include <asm/uaccess.h>
 #include <asm/ocp.h>
 
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/crc32.h>
-
 #include "ibm_emac_core.h"
-
-//#define MDIO_DEBUG(fmt) printk fmt
-#define MDIO_DEBUG(fmt)
-
-//#define LINK_DEBUG(fmt) printk fmt
-#define LINK_DEBUG(fmt)
-
-//#define PKT_DEBUG(fmt) printk fmt
-#define PKT_DEBUG(fmt)
-
-#define DRV_NAME        "emac"
-#define DRV_VERSION     "2.0"
-#define DRV_AUTHOR      "Benjamin Herrenschmidt <benh@kernel.crashing.org>"
-#define DRV_DESC        "IBM EMAC Ethernet driver"
+#include "ibm_emac_debug.h"
 
 /*
- * When mdio_idx >= 0, contains a list of emac ocp_devs
- * that have had their initialization deferred until the
- * common MDIO controller has been initialized.
+ * Lack of dma_unmap_???? calls is intentional.
+ *
+ * API-correct usage requires additional support state information to be 
+ * maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to
+ * EMAC design (e.g. TX buffer passed from network stack can be split into
+ * several BDs, dma_map_single/dma_map_page can be used to map particular BD),
+ * maintaining such information will add additional overhead.
+ * Current DMA API implementation for 4xx processors only ensures cache coherency
+ * and dma_unmap_???? routines are empty and are likely to stay this way.
+ * I decided to omit dma_unmap_??? calls because I don't want to add additional
+ * complexity just for the sake of following some abstract API, when it doesn't
+ * add any real benefit to the driver. I understand that this decision maybe 
+ * controversial, but I really tried to make code API-correct and efficient 
+ * at the same time and didn't come up with code I liked :(.                --ebs
  */
-LIST_HEAD(emac_init_list);
 
-MODULE_AUTHOR(DRV_AUTHOR);
+#define DRV_NAME        "emac"
+#define DRV_VERSION     "3.53"
+#define DRV_DESC        "PPC 4xx OCP EMAC driver"
+
 MODULE_DESCRIPTION(DRV_DESC);
+MODULE_AUTHOR
+    ("Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>");
 MODULE_LICENSE("GPL");
 
-static int skb_res = SKB_RES;
-module_param(skb_res, int, 0444);
-MODULE_PARM_DESC(skb_res, "Amount of data to reserve on skb buffs\n"
-		 "The 405 handles a misaligned IP header fine but\n"
-		 "this can help if you are routing to a tunnel or a\n"
-		 "device that needs aligned data. 0..2");
-
-#define RGMII_PRIV(ocpdev) ((struct ibm_ocp_rgmii*)ocp_get_drvdata(ocpdev))
+/* minimum number of free TX descriptors required to wake up TX process */
+#define EMAC_TX_WAKEUP_THRESH		(NUM_TX_BUFF / 4)
 
-static unsigned int rgmii_enable[] = {
-	RGMII_RTBI,
-	RGMII_RGMII,
-	RGMII_TBI,
-	RGMII_GMII
-};
+/* If packet size is less than this number, we allocate small skb and copy packet 
+ * contents into it instead of just sending original big skb up
+ */
+#define EMAC_RX_COPY_THRESH		CONFIG_IBM_EMAC_RX_COPY_THRESHOLD
 
-static unsigned int rgmii_speed_mask[] = {
-	RGMII_MII2_SPDMASK,
-	RGMII_MII3_SPDMASK
-};
+/* Since multiple EMACs share MDIO lines in various ways, we need
+ * to avoid re-using the same PHY ID in cases where the arch didn't
+ * setup precise phy_map entries
+ */
+static u32 busy_phy_map;
 
-static unsigned int rgmii_speed100[] = {
-	RGMII_MII2_100MB,
-	RGMII_MII3_100MB
-};
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && (defined(CONFIG_405EP) || defined(CONFIG_440EP))
+/* 405EP has "EMAC to PHY Control Register" (CPC0_EPCTL) which can help us
+ * with PHY RX clock problem.
+ * 440EP has more sane SDR0_MFR register implementation than 440GX, which
+ * also allows controlling each EMAC clock
+ */
+static inline void EMAC_RX_CLK_TX(int idx)
+{
+	unsigned long flags;
+	local_irq_save(flags);
 
-static unsigned int rgmii_speed1000[] = {
-	RGMII_MII2_1000MB,
-	RGMII_MII3_1000MB
-};
+#if defined(CONFIG_405EP)
+	mtdcr(0xf3, mfdcr(0xf3) | (1 << idx));
+#else /* CONFIG_440EP */
+	SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) | (0x08000000 >> idx));
+#endif
 
-#define ZMII_PRIV(ocpdev) ((struct ibm_ocp_zmii*)ocp_get_drvdata(ocpdev))
+	local_irq_restore(flags);
+}
 
-static unsigned int zmii_enable[][4] = {
-	{ZMII_SMII0, ZMII_RMII0, ZMII_MII0,
-	 ~(ZMII_MDI1 | ZMII_MDI2 | ZMII_MDI3)},
-	{ZMII_SMII1, ZMII_RMII1, ZMII_MII1,
-	 ~(ZMII_MDI0 | ZMII_MDI2 | ZMII_MDI3)},
-	{ZMII_SMII2, ZMII_RMII2, ZMII_MII2,
-	 ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI3)},
-	{ZMII_SMII3, ZMII_RMII3, ZMII_MII3, ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI2)}
-};
+static inline void EMAC_RX_CLK_DEFAULT(int idx)
+{
+	unsigned long flags;
+	local_irq_save(flags);
 
-static unsigned int mdi_enable[] = {
-	ZMII_MDI0,
-	ZMII_MDI1,
-	ZMII_MDI2,
-	ZMII_MDI3
-};
+#if defined(CONFIG_405EP)
+	mtdcr(0xf3, mfdcr(0xf3) & ~(1 << idx));
+#else /* CONFIG_440EP */
+	SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~(0x08000000 >> idx));
+#endif
 
-static unsigned int zmii_speed = 0x0;
-static unsigned int zmii_speed100[] = {
-	ZMII_MII0_100MB,
-	ZMII_MII1_100MB,
-	ZMII_MII2_100MB,
-	ZMII_MII3_100MB
-};
+	local_irq_restore(flags);
+}
+#else
+#define EMAC_RX_CLK_TX(idx)		((void)0)
+#define EMAC_RX_CLK_DEFAULT(idx)	((void)0)
+#endif
 
-/* Since multiple EMACs share MDIO lines in various ways, we need
- * to avoid re-using the same PHY ID in cases where the arch didn't
- * setup precise phy_map entries
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && defined(CONFIG_440GX)
+/* We can switch Ethernet clock to the internal source through SDR0_MFR[ECS],
+ * unfortunately this is less flexible than 440EP case, because it's a global 
+ * setting for all EMACs, therefore we do this clock trick only during probe.
  */
-static u32 busy_phy_map = 0;
+#define EMAC_CLK_INTERNAL		SDR_WRITE(DCRN_SDR_MFR, \
+					    SDR_READ(DCRN_SDR_MFR) | 0x08000000)
+#define EMAC_CLK_EXTERNAL		SDR_WRITE(DCRN_SDR_MFR, \
+					    SDR_READ(DCRN_SDR_MFR) & ~0x08000000)
+#else
+#define EMAC_CLK_INTERNAL		((void)0)
+#define EMAC_CLK_EXTERNAL		((void)0)
+#endif
 
-/* If EMACs share a common MDIO device, this points to it */
-static struct net_device *mdio_ndev = NULL;
+/* I don't want to litter system log with timeout errors 
+ * when we have brain-damaged PHY.
+ */
+static inline void emac_report_timeout_error(struct ocp_enet_private *dev,
+					     const char *error)
+{
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX)
+	DBG("%d: %s" NL, dev->def->index, error);
+#else
+	if (net_ratelimit())
+		printk(KERN_ERR "emac%d: %s\n", dev->def->index, error);
+#endif
+}
 
-struct emac_def_dev {
-	struct list_head link;
-	struct ocp_device *ocpdev;
-	struct ibm_ocp_mal *mal;
+/* PHY polling intervals */
+#define PHY_POLL_LINK_ON	HZ
+#define PHY_POLL_LINK_OFF	(HZ / 5)
+
+/* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */
+static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = {
+	"rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum",
+	"tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom",
+	"rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu",
+	"rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet",
+	"rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error",
+	"rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range",
+	"rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun",
+	"rx_bad_packet", "rx_runt_packet", "rx_short_event",
+	"rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long",
+	"rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors",
+	"tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral",
+	"tx_bd_excessive_collisions", "tx_bd_late_collision",
+	"tx_bd_multple_collisions", "tx_bd_single_collision",
+	"tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe",
+	"tx_errors"
 };
 
-static struct net_device_stats *emac_stats(struct net_device *dev)
+static irqreturn_t emac_irq(int irq, void *dev_instance, struct pt_regs *regs);
+static void emac_clean_tx_ring(struct ocp_enet_private *dev);
+
+static inline int emac_phy_supports_gige(int phy_mode)
 {
-	struct ocp_enet_private *fep = dev->priv;
-	return &fep->stats;
-};
+	return  phy_mode == PHY_MODE_GMII ||
+		phy_mode == PHY_MODE_RGMII ||
+		phy_mode == PHY_MODE_TBI ||
+		phy_mode == PHY_MODE_RTBI;
+}
 
-static int
-emac_init_rgmii(struct ocp_device *rgmii_dev, int input, int phy_mode)
+static inline int emac_phy_gpcs(int phy_mode)
 {
-	struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(rgmii_dev);
-	const char *mode_name[] = { "RTBI", "RGMII", "TBI", "GMII" };
-	int mode = -1;
+	return  phy_mode == PHY_MODE_TBI ||
+		phy_mode == PHY_MODE_RTBI;
+}
 
-	if (!rgmii) {
-		rgmii = kmalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL);
+static inline void emac_tx_enable(struct ocp_enet_private *dev)
+{
+	struct emac_regs *p = dev->emacp;
+	unsigned long flags;
+	u32 r;
 
-		if (rgmii == NULL) {
-			printk(KERN_ERR
-			       "rgmii%d: Out of memory allocating RGMII structure!\n",
-			       rgmii_dev->def->index);
-			return -ENOMEM;
-		}
+	local_irq_save(flags);
 
-		memset(rgmii, 0, sizeof(*rgmii));
+	DBG("%d: tx_enable" NL, dev->def->index);
 
-		rgmii->base =
-		    (struct rgmii_regs *)ioremap(rgmii_dev->def->paddr,
-						 sizeof(*rgmii->base));
-		if (rgmii->base == NULL) {
-			printk(KERN_ERR
-			       "rgmii%d: Cannot ioremap bridge registers!\n",
-			       rgmii_dev->def->index);
+	r = in_be32(&p->mr0);
+	if (!(r & EMAC_MR0_TXE))
+		out_be32(&p->mr0, r | EMAC_MR0_TXE);
+	local_irq_restore(flags);
+}
 
-			kfree(rgmii);
-			return -ENOMEM;
-		}
-		ocp_set_drvdata(rgmii_dev, rgmii);
-	}
+static void emac_tx_disable(struct ocp_enet_private *dev)
+{
+	struct emac_regs *p = dev->emacp;
+	unsigned long flags;
+	u32 r;
 
-	if (phy_mode) {
-		switch (phy_mode) {
-		case PHY_MODE_GMII:
-			mode = GMII;
-			break;
-		case PHY_MODE_TBI:
-			mode = TBI;
-			break;
-		case PHY_MODE_RTBI:
-			mode = RTBI;
-			break;
-		case PHY_MODE_RGMII:
-		default:
-			mode = RGMII;
-		}
-		rgmii->base->fer &= ~RGMII_FER_MASK(input);
-		rgmii->base->fer |= rgmii_enable[mode] << (4 * input);
-	} else {
-		switch ((rgmii->base->fer & RGMII_FER_MASK(input)) >> (4 *
-								       input)) {
-		case RGMII_RTBI:
-			mode = RTBI;
-			break;
-		case RGMII_RGMII:
-			mode = RGMII;
-			break;
-		case RGMII_TBI:
-			mode = TBI;
-			break;
-		case RGMII_GMII:
-			mode = GMII;
-		}
-	}
+	local_irq_save(flags);
+
+	DBG("%d: tx_disable" NL, dev->def->index);
 
-	/* Set mode to RGMII if nothing valid is detected */
-	if (mode < 0)
-		mode = RGMII;
+	r = in_be32(&p->mr0);
+	if (r & EMAC_MR0_TXE) {
+		int n = 300;
+		out_be32(&p->mr0, r & ~EMAC_MR0_TXE);
+		while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n)
+			--n;
+		if (unlikely(!n))
+			emac_report_timeout_error(dev, "TX disable timeout");
+	}
+	local_irq_restore(flags);
+}
 
-	printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n",
-	       rgmii_dev->def->index, input, mode_name[mode]);
+static void emac_rx_enable(struct ocp_enet_private *dev)
+{
+	struct emac_regs *p = dev->emacp;
+	unsigned long flags;
+	u32 r;
 
-	rgmii->mode[input] = mode;
-	rgmii->users++;
+	local_irq_save(flags);
+	if (unlikely(dev->commac.rx_stopped))
+		goto out;
 
-	return 0;
+	DBG("%d: rx_enable" NL, dev->def->index);
+
+	r = in_be32(&p->mr0);
+	if (!(r & EMAC_MR0_RXE)) {
+		if (unlikely(!(r & EMAC_MR0_RXI))) {
+			/* Wait if previous async disable is still in progress */
+			int n = 100;
+			while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n)
+				--n;
+			if (unlikely(!n))
+				emac_report_timeout_error(dev,
+							  "RX disable timeout");
+		}
+		out_be32(&p->mr0, r | EMAC_MR0_RXE);
+	}
+      out:
+	local_irq_restore(flags);
 }
 
-static void
-emac_rgmii_port_speed(struct ocp_device *ocpdev, int input, int speed)
+static void emac_rx_disable(struct ocp_enet_private *dev)
 {
-	struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev);
-	unsigned int rgmii_speed;
-
-	rgmii_speed = in_be32(&rgmii->base->ssr);
+	struct emac_regs *p = dev->emacp;
+	unsigned long flags;
+	u32 r;
 
-	rgmii_speed &= ~rgmii_speed_mask[input];
+	local_irq_save(flags);
 
-	if (speed == 1000)
-		rgmii_speed |= rgmii_speed1000[input];
-	else if (speed == 100)
-		rgmii_speed |= rgmii_speed100[input];
+	DBG("%d: rx_disable" NL, dev->def->index);
 
-	out_be32(&rgmii->base->ssr, rgmii_speed);
+	r = in_be32(&p->mr0);
+	if (r & EMAC_MR0_RXE) {
+		int n = 300;
+		out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
+		while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n)
+			--n;
+		if (unlikely(!n))
+			emac_report_timeout_error(dev, "RX disable timeout");
+	}
+	local_irq_restore(flags);
 }
 
-static void emac_close_rgmii(struct ocp_device *ocpdev)
+static inline void emac_rx_disable_async(struct ocp_enet_private *dev)
 {
-	struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev);
-	BUG_ON(!rgmii || rgmii->users == 0);
+	struct emac_regs *p = dev->emacp;
+	unsigned long flags;
+	u32 r;
 
-	if (!--rgmii->users) {
-		ocp_set_drvdata(ocpdev, NULL);
-		iounmap((void *)rgmii->base);
-		kfree(rgmii);
-	}
+	local_irq_save(flags);
+
+	DBG("%d: rx_disable_async" NL, dev->def->index);
+
+	r = in_be32(&p->mr0);
+	if (r & EMAC_MR0_RXE)
+		out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
+	local_irq_restore(flags);
 }
 
-static int emac_init_zmii(struct ocp_device *zmii_dev, int input, int phy_mode)
+static int emac_reset(struct ocp_enet_private *dev)
 {
-	struct ibm_ocp_zmii *zmii = ZMII_PRIV(zmii_dev);
-	const char *mode_name[] = { "SMII", "RMII", "MII" };
-	int mode = -1;
+	struct emac_regs *p = dev->emacp;
+	unsigned long flags;
+	int n = 20;
 
-	if (!zmii) {
-		zmii = kmalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
-		if (zmii == NULL) {
-			printk(KERN_ERR
-			       "zmii%d: Out of memory allocating ZMII structure!\n",
-			       zmii_dev->def->index);
-			return -ENOMEM;
-		}
-		memset(zmii, 0, sizeof(*zmii));
+	DBG("%d: reset" NL, dev->def->index);
 
-		zmii->base =
-		    (struct zmii_regs *)ioremap(zmii_dev->def->paddr,
-						sizeof(*zmii->base));
-		if (zmii->base == NULL) {
-			printk(KERN_ERR
-			       "zmii%d: Cannot ioremap bridge registers!\n",
-			       zmii_dev->def->index);
+	local_irq_save(flags);
 
-			kfree(zmii);
-			return -ENOMEM;
-		}
-		ocp_set_drvdata(zmii_dev, zmii);
+	if (!dev->reset_failed) {
+		/* 40x erratum suggests stopping RX channel before reset,
+		 * we stop TX as well
+		 */
+		emac_rx_disable(dev);
+		emac_tx_disable(dev);
 	}
 
-	if (phy_mode) {
-		switch (phy_mode) {
-		case PHY_MODE_MII:
-			mode = MII;
-			break;
-		case PHY_MODE_RMII:
-			mode = RMII;
-			break;
-		case PHY_MODE_SMII:
-		default:
-			mode = SMII;
-		}
-		zmii->base->fer &= ~ZMII_FER_MASK(input);
-		zmii->base->fer |= zmii_enable[input][mode];
+	out_be32(&p->mr0, EMAC_MR0_SRST);
+	while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n)
+		--n;
+	local_irq_restore(flags);
+
+	if (n) {
+		dev->reset_failed = 0;
+		return 0;
 	} else {
-		switch ((zmii->base->fer & ZMII_FER_MASK(input)) << (4 * input)) {
-		case ZMII_MII0:
-			mode = MII;
-			break;
-		case ZMII_RMII0:
-			mode = RMII;
-			break;
-		case ZMII_SMII0:
-			mode = SMII;
-		}
+		emac_report_timeout_error(dev, "reset timeout");
+		dev->reset_failed = 1;
+		return -ETIMEDOUT;
 	}
+}
 
-	/* Set mode to SMII if nothing valid is detected */
-	if (mode < 0)
-		mode = SMII;
+static void emac_hash_mc(struct ocp_enet_private *dev)
+{
+	struct emac_regs *p = dev->emacp;
+	u16 gaht[4] = { 0 };
+	struct dev_mc_list *dmi;
 
-	printk(KERN_NOTICE "zmii%d: input %d in %s mode\n",
-	       zmii_dev->def->index, input, mode_name[mode]);
+	DBG("%d: hash_mc %d" NL, dev->def->index, dev->ndev->mc_count);
 
-	zmii->mode[input] = mode;
-	zmii->users++;
+	for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) {
+		int bit;
+		DBG2("%d: mc %02x:%02x:%02x:%02x:%02x:%02x" NL,
+		     dev->def->index,
+		     dmi->dmi_addr[0], dmi->dmi_addr[1], dmi->dmi_addr[2],
+		     dmi->dmi_addr[3], dmi->dmi_addr[4], dmi->dmi_addr[5]);
 
-	return 0;
+		bit = 63 - (ether_crc(ETH_ALEN, dmi->dmi_addr) >> 26);
+		gaht[bit >> 4] |= 0x8000 >> (bit & 0x0f);
+	}
+	out_be32(&p->gaht1, gaht[0]);
+	out_be32(&p->gaht2, gaht[1]);
+	out_be32(&p->gaht3, gaht[2]);
+	out_be32(&p->gaht4, gaht[3]);
 }
 
-static void emac_enable_zmii_port(struct ocp_device *ocpdev, int input)
+static inline u32 emac_iff2rmr(struct net_device *ndev)
 {
-	u32 mask;
-	struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
+	u32 r = EMAC_RMR_SP | EMAC_RMR_SFCS | EMAC_RMR_IAE | EMAC_RMR_BAE |
+	    EMAC_RMR_BASE;
 
-	mask = in_be32(&zmii->base->fer);
-	mask &= zmii_enable[input][MDI];	/* turn all non enabled MDI's off */
-	mask |= zmii_enable[input][zmii->mode[input]] | mdi_enable[input];
-	out_be32(&zmii->base->fer, mask);
+	if (ndev->flags & IFF_PROMISC)
+		r |= EMAC_RMR_PME;
+	else if (ndev->flags & IFF_ALLMULTI || ndev->mc_count > 32)
+		r |= EMAC_RMR_PMME;
+	else if (ndev->mc_count > 0)
+		r |= EMAC_RMR_MAE;
+
+	return r;
 }
 
-static void
-emac_zmii_port_speed(struct ocp_device *ocpdev, int input, int speed)
+static inline int emac_opb_mhz(void)
 {
-	struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
-
-	if (speed == 100)
-		zmii_speed |= zmii_speed100[input];
-	else
-		zmii_speed &= ~zmii_speed100[input];
-
-	out_be32(&zmii->base->ssr, zmii_speed);
+	return (ocp_sys_info.opb_bus_freq + 500000) / 1000000;
 }
 
-static void emac_close_zmii(struct ocp_device *ocpdev)
+/* BHs disabled */
+static int emac_configure(struct ocp_enet_private *dev)
 {
-	struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
-	BUG_ON(!zmii || zmii->users == 0);
+	struct emac_regs *p = dev->emacp;
+	struct net_device *ndev = dev->ndev;
+	int gige;
+	u32 r;
 
-	if (!--zmii->users) {
-		ocp_set_drvdata(ocpdev, NULL);
-		iounmap((void *)zmii->base);
-		kfree(zmii);
-	}
-}
+	DBG("%d: configure" NL, dev->def->index);
 
-int emac_phy_read(struct net_device *dev, int mii_id, int reg)
-{
-	int count;
-	uint32_t stacr;
-	struct ocp_enet_private *fep = dev->priv;
-	emac_t *emacp = fep->emacp;
+	if (emac_reset(dev) < 0)
+		return -ETIMEDOUT;
 
-	MDIO_DEBUG(("%s: phy_read, id: 0x%x, reg: 0x%x\n", dev->name, mii_id,
-		    reg));
+	tah_reset(dev->tah_dev);
 
-	/* Enable proper ZMII port */
-	if (fep->zmii_dev)
-		emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input);
+	/* Mode register */
+	r = EMAC_MR1_BASE(emac_opb_mhz()) | EMAC_MR1_VLE | EMAC_MR1_IST;
+	if (dev->phy.duplex == DUPLEX_FULL)
+		r |= EMAC_MR1_FDE;
+	switch (dev->phy.speed) {
+	case SPEED_1000:
+		if (emac_phy_gpcs(dev->phy.mode)) {
+			r |= EMAC_MR1_MF_1000GPCS |
+			    EMAC_MR1_MF_IPPA(dev->phy.address);
 
-	/* Use the EMAC that has the MDIO port */
-	if (fep->mdio_dev) {
-		dev = fep->mdio_dev;
-		fep = dev->priv;
-		emacp = fep->emacp;
+			/* Put some arbitrary OUI, Manuf & Rev IDs so we can
+			 * identify this GPCS PHY later.
+			 */
+			out_be32(&p->ipcr, 0xdeadbeef);
+		} else
+			r |= EMAC_MR1_MF_1000;
+		r |= EMAC_MR1_RFS_16K;
+		gige = 1;
+		
+		if (dev->ndev->mtu > ETH_DATA_LEN)
+			r |= EMAC_MR1_JPSM;
+		break;
+	case SPEED_100:
+		r |= EMAC_MR1_MF_100;
+		/* Fall through */
+	default:
+		r |= EMAC_MR1_RFS_4K;
+		gige = 0;
+		break;
 	}
 
-	count = 0;
-	while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
-					&& (count++ < MDIO_DELAY))
-		udelay(1);
-	MDIO_DEBUG((" (count was %d)\n", count));
+	if (dev->rgmii_dev)
+		rgmii_set_speed(dev->rgmii_dev, dev->rgmii_input,
+				dev->phy.speed);
+	else
+		zmii_set_speed(dev->zmii_dev, dev->zmii_input, dev->phy.speed);
 
-	if ((stacr & EMAC_STACR_OC) == 0) {
-		printk(KERN_WARNING "%s: PHY read timeout #1!\n", dev->name);
-		return -1;
+#if !defined(CONFIG_40x)
+	/* on 40x erratum forces us to NOT use integrated flow control, 
+	 * let's hope it works on 44x ;)
+	 */
+	if (dev->phy.duplex == DUPLEX_FULL) {
+		if (dev->phy.pause)
+			r |= EMAC_MR1_EIFC | EMAC_MR1_APP;
+		else if (dev->phy.asym_pause)
+			r |= EMAC_MR1_APP;
 	}
+#endif
+	out_be32(&p->mr1, r);
+
+	/* Set individual MAC address */
+	out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]);
+	out_be32(&p->ialr, (ndev->dev_addr[2] << 24) |
+		 (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) |
+		 ndev->dev_addr[5]);
+
+	/* VLAN Tag Protocol ID */
+	out_be32(&p->vtpid, 0x8100);
+
+	/* Receive mode register */
+	r = emac_iff2rmr(ndev);
+	if (r & EMAC_RMR_MAE)
+		emac_hash_mc(dev);
+	out_be32(&p->rmr, r);
+
+	/* FIFOs thresholds */
+	r = EMAC_TMR1((EMAC_MAL_BURST_SIZE / EMAC_FIFO_ENTRY_SIZE) + 1,
+		      EMAC_TX_FIFO_SIZE / 2 / EMAC_FIFO_ENTRY_SIZE);
+	out_be32(&p->tmr1, r);
+	out_be32(&p->trtr, EMAC_TRTR(EMAC_TX_FIFO_SIZE / 2));
+
+	/* PAUSE frame is sent when RX FIFO reaches its high-water mark,
+	   there should be still enough space in FIFO to allow the our link
+	   partner time to process this frame and also time to send PAUSE 
+	   frame itself.
+
+	   Here is the worst case scenario for the RX FIFO "headroom"
+	   (from "The Switch Book") (100Mbps, without preamble, inter-frame gap):
+
+	   1) One maximum-length frame on TX                    1522 bytes
+	   2) One PAUSE frame time                                64 bytes
+	   3) PAUSE frame decode time allowance                   64 bytes
+	   4) One maximum-length frame on RX                    1522 bytes
+	   5) Round-trip propagation delay of the link (100Mb)    15 bytes
+	   ----------       
+	   3187 bytes
+
+	   I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes)
+	   low-water mark  to RX_FIFO_SIZE / 8 (512 bytes)
+	 */
+	r = EMAC_RWMR(EMAC_RX_FIFO_SIZE(gige) / 8 / EMAC_FIFO_ENTRY_SIZE,
+		      EMAC_RX_FIFO_SIZE(gige) / 4 / EMAC_FIFO_ENTRY_SIZE);
+	out_be32(&p->rwmr, r);
+
+	/* Set PAUSE timer to the maximum */
+	out_be32(&p->ptr, 0xffff);
+
+	/* IRQ sources */
+	out_be32(&p->iser, EMAC_ISR_TXPE | EMAC_ISR_RXPE | /* EMAC_ISR_TXUE |
+		 EMAC_ISR_RXOE | */ EMAC_ISR_OVR | EMAC_ISR_BP | EMAC_ISR_SE |
+		 EMAC_ISR_ALE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE |
+		 EMAC_ISR_IRE | EMAC_ISR_TE);
+		 
+	/* We need to take GPCS PHY out of isolate mode after EMAC reset */
+	if (emac_phy_gpcs(dev->phy.mode)) 
+		mii_reset_phy(&dev->phy);
+		 
+	return 0;
+}
 
-	/* Clear the speed bits and make a read request to the PHY */
-	stacr = ((EMAC_STACR_READ | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
-	stacr |= ((mii_id & 0x1F) << 5);
+/* BHs disabled */
+static void emac_reinitialize(struct ocp_enet_private *dev)
+{
+	DBG("%d: reinitialize" NL, dev->def->index);
 
-	out_be32(&emacp->em0stacr, stacr);
+	if (!emac_configure(dev)) {
+		emac_tx_enable(dev);
+		emac_rx_enable(dev);
+	}
+}
 
-	count = 0;
-	while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
-					&& (count++ < MDIO_DELAY))
-		udelay(1);
-	MDIO_DEBUG((" (count was %d)\n", count));
+/* BHs disabled */
+static void emac_full_tx_reset(struct net_device *ndev)
+{
+	struct ocp_enet_private *dev = ndev->priv;
+	struct ocp_func_emac_data *emacdata = dev->def->additions;
 
-	if ((stacr & EMAC_STACR_OC) == 0) {
-		printk(KERN_WARNING "%s: PHY read timeout #2!\n", dev->name);
-		return -1;
-	}
+	DBG("%d: full_tx_reset" NL, dev->def->index);
 
-	/* Check for a read error */
-	if (stacr & EMAC_STACR_PHYE) {
-		MDIO_DEBUG(("EMAC MDIO PHY error !\n"));
-		return -1;
-	}
+	emac_tx_disable(dev);
+	mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan);
+	emac_clean_tx_ring(dev);
+	dev->tx_cnt = dev->tx_slot = dev->ack_slot = 0;
 
-	MDIO_DEBUG((" -> 0x%x\n", stacr >> 16));
+	emac_configure(dev);
 
-	return (stacr >> 16);
+	mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan);
+	emac_tx_enable(dev);
+	emac_rx_enable(dev);
+
+	netif_wake_queue(ndev);
 }
 
-void emac_phy_write(struct net_device *dev, int mii_id, int reg, int data)
+static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg)
 {
-	int count;
-	uint32_t stacr;
-	struct ocp_enet_private *fep = dev->priv;
-	emac_t *emacp = fep->emacp;
+	struct emac_regs *p = dev->emacp;
+	u32 r;
+	int n;
 
-	MDIO_DEBUG(("%s phy_write, id: 0x%x, reg: 0x%x, data: 0x%x\n",
-		    dev->name, mii_id, reg, data));
+	DBG2("%d: mdio_read(%02x,%02x)" NL, dev->def->index, id, reg);
 
-	/* Enable proper ZMII port */
-	if (fep->zmii_dev)
-		emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input);
+	/* Enable proper MDIO port */
+	zmii_enable_mdio(dev->zmii_dev, dev->zmii_input);
 
-	/* Use the EMAC that has the MDIO port */
-	if (fep->mdio_dev) {
-		dev = fep->mdio_dev;
-		fep = dev->priv;
-		emacp = fep->emacp;
+	/* Wait for management interface to become idle */
+	n = 10;
+	while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+		udelay(1);
+		if (!--n)
+			goto to;
 	}
 
-	count = 0;
-	while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
-					&& (count++ < MDIO_DELAY))
+	/* Issue read command */
+	out_be32(&p->stacr,
+		 EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ |
+		 (reg & EMAC_STACR_PRA_MASK)
+		 | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT));
+
+	/* Wait for read to complete */
+	n = 100;
+	while (!((r = in_be32(&p->stacr)) & EMAC_STACR_OC)) {
 		udelay(1);
-	MDIO_DEBUG((" (count was %d)\n", count));
+		if (!--n)
+			goto to;
+	}
 
-	if ((stacr & EMAC_STACR_OC) == 0) {
-		printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
-		return;
+	if (unlikely(r & EMAC_STACR_PHYE)) {
+		DBG("%d: mdio_read(%02x, %02x) failed" NL, dev->def->index,
+		    id, reg);
+		return -EREMOTEIO;
 	}
 
-	/* Clear the speed bits and make a read request to the PHY */
+	r = ((r >> EMAC_STACR_PHYD_SHIFT) & EMAC_STACR_PHYD_MASK);
+	DBG2("%d: mdio_read -> %04x" NL, dev->def->index, r);
+	return r;
+      to:
+	DBG("%d: MII management interface timeout (read)" NL, dev->def->index);
+	return -ETIMEDOUT;
+}
 
-	stacr = ((EMAC_STACR_WRITE | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
-	stacr |= ((mii_id & 0x1f) << 5) | ((data & 0xffff) << 16);
+static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg,
+			      u16 val)
+{
+	struct emac_regs *p = dev->emacp;
+	int n;
 
-	out_be32(&emacp->em0stacr, stacr);
+	DBG2("%d: mdio_write(%02x,%02x,%04x)" NL, dev->def->index, id, reg,
+	     val);
 
-	count = 0;
-	while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
-					&& (count++ < MDIO_DELAY))
+	/* Enable proper MDIO port */
+	zmii_enable_mdio(dev->zmii_dev, dev->zmii_input);
+
+	/* Wait for management interface to be idle */
+	n = 10;
+	while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
 		udelay(1);
-	MDIO_DEBUG((" (count was %d)\n", count));
+		if (!--n)
+			goto to;
+	}
 
-	if ((stacr & EMAC_STACR_OC) == 0)
-		printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
+	/* Issue write command */
+	out_be32(&p->stacr,
+		 EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE |
+		 (reg & EMAC_STACR_PRA_MASK) |
+		 ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) |
+		 (val << EMAC_STACR_PHYD_SHIFT));
 
-	/* Check for a write error */
-	if ((stacr & EMAC_STACR_PHYE) != 0) {
-		MDIO_DEBUG(("EMAC MDIO PHY error !\n"));
+	/* Wait for write to complete */
+	n = 100;
+	while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+		udelay(1);
+		if (!--n)
+			goto to;
 	}
+	return;
+      to:
+	DBG("%d: MII management interface timeout (write)" NL, dev->def->index);
 }
 
-static void emac_txeob_dev(void *param, u32 chanmask)
+static int emac_mdio_read(struct net_device *ndev, int id, int reg)
 {
-	struct net_device *dev = param;
-	struct ocp_enet_private *fep = dev->priv;
-	unsigned long flags;
-
-	spin_lock_irqsave(&fep->lock, flags);
-
-	PKT_DEBUG(("emac_txeob_dev() entry, tx_cnt: %d\n", fep->tx_cnt));
-
-	while (fep->tx_cnt &&
-	       !(fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_READY)) {
+	struct ocp_enet_private *dev = ndev->priv;
+	int res;
+
+	local_bh_disable();
+	res = __emac_mdio_read(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id,
+			       (u8) reg);
+	local_bh_enable();
+	return res;
+}
 
-		if (fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_LAST) {
-			/* Tell the system the transmit completed. */
-			dma_unmap_single(&fep->ocpdev->dev,
-					 fep->tx_desc[fep->ack_slot].data_ptr,
-					 fep->tx_desc[fep->ack_slot].data_len,
-					 DMA_TO_DEVICE);
-			dev_kfree_skb_irq(fep->tx_skb[fep->ack_slot]);
+static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val)
+{
+	struct ocp_enet_private *dev = ndev->priv;
 
-			if (fep->tx_desc[fep->ack_slot].ctrl &
-			    (EMAC_TX_ST_EC | EMAC_TX_ST_MC | EMAC_TX_ST_SC))
-				fep->stats.collisions++;
-		}
+	local_bh_disable();
+	__emac_mdio_write(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id,
+			  (u8) reg, (u16) val);
+	local_bh_enable();
+}
 
-		fep->tx_skb[fep->ack_slot] = (struct sk_buff *)NULL;
-		if (++fep->ack_slot == NUM_TX_BUFF)
-			fep->ack_slot = 0;
+/* BHs disabled */
+static void emac_set_multicast_list(struct net_device *ndev)
+{
+	struct ocp_enet_private *dev = ndev->priv;
+	struct emac_regs *p = dev->emacp;
+	u32 rmr = emac_iff2rmr(ndev);
+
+	DBG("%d: multicast %08x" NL, dev->def->index, rmr);
+	BUG_ON(!netif_running(dev->ndev));
+
+	/* I decided to relax register access rules here to avoid
+	 * full EMAC reset.
+	 *
+	 * There is a real problem with EMAC4 core if we use MWSW_001 bit 
+	 * in MR1 register and do a full EMAC reset.
+	 * One TX BD status update is delayed and, after EMAC reset, it 
+	 * never happens, resulting in TX hung (it'll be recovered by TX 
+	 * timeout handler eventually, but this is just gross).
+	 * So we either have to do full TX reset or try to cheat here :)
+	 *
+	 * The only required change is to RX mode register, so I *think* all
+	 * we need is just to stop RX channel. This seems to work on all
+	 * tested SoCs.                                                --ebs
+	 */
+	emac_rx_disable(dev);
+	if (rmr & EMAC_RMR_MAE)
+		emac_hash_mc(dev);
+	out_be32(&p->rmr, rmr);
+	emac_rx_enable(dev);
+}
 
-		fep->tx_cnt--;
+/* BHs disabled */
+static int emac_resize_rx_ring(struct ocp_enet_private *dev, int new_mtu)
+{
+	struct ocp_func_emac_data *emacdata = dev->def->additions;
+	int rx_sync_size = emac_rx_sync_size(new_mtu);
+	int rx_skb_size = emac_rx_skb_size(new_mtu);
+	int i, ret = 0;
+
+	emac_rx_disable(dev);
+	mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+
+	if (dev->rx_sg_skb) {
+		++dev->estats.rx_dropped_resize;
+		dev_kfree_skb(dev->rx_sg_skb);
+		dev->rx_sg_skb = NULL;
 	}
-	if (fep->tx_cnt < NUM_TX_BUFF)
-		netif_wake_queue(dev);
 
-	PKT_DEBUG(("emac_txeob_dev() exit, tx_cnt: %d\n", fep->tx_cnt));
+	/* Make a first pass over RX ring and mark BDs ready, dropping 
+	 * non-processed packets on the way. We need this as a separate pass
+	 * to simplify error recovery in the case of allocation failure later.
+	 */
+	for (i = 0; i < NUM_RX_BUFF; ++i) {
+		if (dev->rx_desc[i].ctrl & MAL_RX_CTRL_FIRST)
+			++dev->estats.rx_dropped_resize;
 
-	spin_unlock_irqrestore(&fep->lock, flags);
-}
+		dev->rx_desc[i].data_len = 0;
+		dev->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY |
+		    (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
+	}
 
-/*
-  Fill/Re-fill the rx chain with valid ctrl/ptrs.
-  This function will fill from rx_slot up to the parm end.
-  So to completely fill the chain pre-set rx_slot to 0 and
-  pass in an end of 0.
- */
-static void emac_rx_fill(struct net_device *dev, int end)
-{
-	int i;
-	struct ocp_enet_private *fep = dev->priv;
-
-	i = fep->rx_slot;
-	do {
-		/* We don't want the 16 bytes skb_reserve done by dev_alloc_skb,
-		 * it breaks our cache line alignement. However, we still allocate
-		 * +16 so that we end up allocating the exact same size as
-		 * dev_alloc_skb() would do.
-		 * Also, because of the skb_res, the max DMA size we give to EMAC
-		 * is slighly wrong, causing it to potentially DMA 2 more bytes
-		 * from a broken/oversized packet. These 16 bytes will take care
-		 * that we don't walk on somebody else toes with that.
-		 */
-		fep->rx_skb[i] =
-		    alloc_skb(fep->rx_buffer_size + 16, GFP_ATOMIC);
-
-		if (fep->rx_skb[i] == NULL) {
-			/* Keep rx_slot here, the next time clean/fill is called
-			 * we will try again before the MAL wraps back here
-			 * If the MAL tries to use this descriptor with
-			 * the EMPTY bit off it will cause the
-			 * rxde interrupt.  That is where we will
-			 * try again to allocate an sk_buff.
-			 */
-			break;
+	/* Reallocate RX ring only if bigger skb buffers are required */
+	if (rx_skb_size <= dev->rx_skb_size)
+		goto skip;
 
+	/* Second pass, allocate new skbs */
+	for (i = 0; i < NUM_RX_BUFF; ++i) {
+		struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC);
+		if (!skb) {
+			ret = -ENOMEM;
+			goto oom;
 		}
 
-		if (skb_res)
-			skb_reserve(fep->rx_skb[i], skb_res);
+		BUG_ON(!dev->rx_skb[i]);
+		dev_kfree_skb(dev->rx_skb[i]);
 
-		/* We must NOT dma_map_single the cache line right after the
-		 * buffer, so we must crop our sync size to account for the
-		 * reserved space
-		 */
-		fep->rx_desc[i].data_ptr =
-		    (unsigned char *)dma_map_single(&fep->ocpdev->dev,
-						    (void *)fep->rx_skb[i]->
-						    data,
-						    fep->rx_buffer_size -
-						    skb_res, DMA_FROM_DEVICE);
-
-		/*
-		 * Some 4xx implementations use the previously
-		 * reserved bits in data_len to encode the MS
-		 * 4-bits of a 36-bit physical address (ERPN)
-		 * This must be initialized.
-		 */
-		fep->rx_desc[i].data_len = 0;
-		fep->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR |
-		    (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
+		skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
+		dev->rx_desc[i].data_ptr =
+		    dma_map_single(dev->ldev, skb->data - 2, rx_sync_size,
+				   DMA_FROM_DEVICE) + 2;
+		dev->rx_skb[i] = skb;
+	}
+      skip:
+	/* Check if we need to change "Jumbo" bit in MR1 */
+	if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) {
+		/* This is to prevent starting RX channel in emac_rx_enable() */
+		dev->commac.rx_stopped = 1;
+
+		dev->ndev->mtu = new_mtu;
+		emac_full_tx_reset(dev->ndev);
+	}
 
-	} while ((i = (i + 1) % NUM_RX_BUFF) != end);
+	mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(new_mtu));
+      oom:
+	/* Restart RX */
+	dev->commac.rx_stopped = dev->rx_slot = 0;
+	mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+	emac_rx_enable(dev);
 
-	fep->rx_slot = i;
+	return ret;
 }
 
-static void
-emac_rx_csum(struct net_device *dev, unsigned short ctrl, struct sk_buff *skb)
+/* Process ctx, rtnl_lock semaphore */
+static int emac_change_mtu(struct net_device *ndev, int new_mtu)
 {
-	struct ocp_enet_private *fep = dev->priv;
+	struct ocp_enet_private *dev = ndev->priv;
+	int ret = 0;
 
-	/* Exit if interface has no TAH engine */
-	if (!fep->tah_dev) {
-		skb->ip_summed = CHECKSUM_NONE;
-		return;
-	}
+	if (new_mtu < EMAC_MIN_MTU || new_mtu > EMAC_MAX_MTU)
+		return -EINVAL;
 
-	/* Check for TCP/UDP/IP csum error */
-	if (ctrl & EMAC_CSUM_VER_ERROR) {
-		/* Let the stack verify checksum errors */
-		skb->ip_summed = CHECKSUM_NONE;
-/*		adapter->hw_csum_err++; */
-	} else {
-		/* Csum is good */
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
-/*		adapter->hw_csum_good++; */
-	}
-}
+	DBG("%d: change_mtu(%d)" NL, dev->def->index, new_mtu);
 
-static int emac_rx_clean(struct net_device *dev)
-{
-	int i, b, bnum = 0, buf[6];
-	int error, frame_length;
-	struct ocp_enet_private *fep = dev->priv;
-	unsigned short ctrl;
+	local_bh_disable();
+	if (netif_running(ndev)) {
+		/* Check if we really need to reinitalize RX ring */
+		if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu))
+			ret = emac_resize_rx_ring(dev, new_mtu);
+	}
 
-	i = fep->rx_slot;
+	if (!ret) {
+		ndev->mtu = new_mtu;
+		dev->rx_skb_size = emac_rx_skb_size(new_mtu);
+		dev->rx_sync_size = emac_rx_sync_size(new_mtu);
+	}	
+	local_bh_enable();
 
-	PKT_DEBUG(("emac_rx_clean() entry, rx_slot: %d\n", fep->rx_slot));
+	return ret;
+}
 
-	do {
-		if (fep->rx_skb[i] == NULL)
-			continue;	/*we have already handled the packet but haved failed to alloc */
-		/* 
-		   since rx_desc is in uncached mem we don't keep reading it directly 
-		   we pull out a local copy of ctrl and do the checks on the copy.
-		 */
-		ctrl = fep->rx_desc[i].ctrl;
-		if (ctrl & MAL_RX_CTRL_EMPTY)
-			break;	/*we don't have any more ready packets */
-
-		if (EMAC_IS_BAD_RX_PACKET(ctrl)) {
-			fep->stats.rx_errors++;
-			fep->stats.rx_dropped++;
-
-			if (ctrl & EMAC_RX_ST_OE)
-				fep->stats.rx_fifo_errors++;
-			if (ctrl & EMAC_RX_ST_AE)
-				fep->stats.rx_frame_errors++;
-			if (ctrl & EMAC_RX_ST_BFCS)
-				fep->stats.rx_crc_errors++;
-			if (ctrl & (EMAC_RX_ST_RP | EMAC_RX_ST_PTL |
-				    EMAC_RX_ST_ORE | EMAC_RX_ST_IRE))
-				fep->stats.rx_length_errors++;
-		} else {
-			if ((ctrl & (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) ==
-			    (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) {
-				/* Single descriptor packet */
-				emac_rx_csum(dev, ctrl, fep->rx_skb[i]);
-				/* Send the skb up the chain. */
-				frame_length = fep->rx_desc[i].data_len - 4;
-				skb_put(fep->rx_skb[i], frame_length);
-				fep->rx_skb[i]->dev = dev;
-				fep->rx_skb[i]->protocol =
-				    eth_type_trans(fep->rx_skb[i], dev);
-				error = netif_rx(fep->rx_skb[i]);
-
-				if ((error == NET_RX_DROP) ||
-				    (error == NET_RX_BAD)) {
-					fep->stats.rx_dropped++;
-				} else {
-					fep->stats.rx_packets++;
-					fep->stats.rx_bytes += frame_length;
-				}
-				fep->rx_skb[i] = NULL;
-			} else {
-				/* Multiple descriptor packet */
-				if (ctrl & MAL_RX_CTRL_FIRST) {
-					if (fep->rx_desc[(i + 1) % NUM_RX_BUFF].
-					    ctrl & MAL_RX_CTRL_EMPTY)
-						break;
-					bnum = 0;
-					buf[bnum] = i;
-					++bnum;
-					continue;
-				}
-				if (((ctrl & MAL_RX_CTRL_FIRST) !=
-				     MAL_RX_CTRL_FIRST) &&
-				    ((ctrl & MAL_RX_CTRL_LAST) !=
-				     MAL_RX_CTRL_LAST)) {
-					if (fep->rx_desc[(i + 1) %
-							 NUM_RX_BUFF].ctrl &
-					    MAL_RX_CTRL_EMPTY) {
-						i = buf[0];
-						break;
-					}
-					buf[bnum] = i;
-					++bnum;
-					continue;
-				}
-				if (ctrl & MAL_RX_CTRL_LAST) {
-					buf[bnum] = i;
-					++bnum;
-					skb_put(fep->rx_skb[buf[0]],
-						fep->rx_desc[buf[0]].data_len);
-					for (b = 1; b < bnum; b++) {
-						/*
-						 * MAL is braindead, we need
-						 * to copy the remainder
-						 * of the packet from the
-						 * latter descriptor buffers
-						 * to the first skb. Then
-						 * dispose of the source
-						 * skbs.
-						 *
-						 * Once the stack is fixed
-						 * to handle frags on most
-						 * protocols we can generate
-						 * a fragmented skb with
-						 * no copies.
-						 */
-						memcpy(fep->rx_skb[buf[0]]->
-						       data +
-						       fep->rx_skb[buf[0]]->len,
-						       fep->rx_skb[buf[b]]->
-						       data,
-						       fep->rx_desc[buf[b]].
-						       data_len);
-						skb_put(fep->rx_skb[buf[0]],
-							fep->rx_desc[buf[b]].
-							data_len);
-						dma_unmap_single(&fep->ocpdev->
-								 dev,
-								 fep->
-								 rx_desc[buf
-									 [b]].
-								 data_ptr,
-								 fep->
-								 rx_desc[buf
-									 [b]].
-								 data_len,
-								 DMA_FROM_DEVICE);
-						dev_kfree_skb(fep->
-							      rx_skb[buf[b]]);
-					}
-					emac_rx_csum(dev, ctrl,
-						     fep->rx_skb[buf[0]]);
-
-					fep->rx_skb[buf[0]]->dev = dev;
-					fep->rx_skb[buf[0]]->protocol =
-					    eth_type_trans(fep->rx_skb[buf[0]],
-							   dev);
-					error = netif_rx(fep->rx_skb[buf[0]]);
-
-					if ((error == NET_RX_DROP)
-					    || (error == NET_RX_BAD)) {
-						fep->stats.rx_dropped++;
-					} else {
-						fep->stats.rx_packets++;
-						fep->stats.rx_bytes +=
-						    fep->rx_skb[buf[0]]->len;
-					}
-					for (b = 0; b < bnum; b++)
-						fep->rx_skb[buf[b]] = NULL;
-				}
-			}
+static void emac_clean_tx_ring(struct ocp_enet_private *dev)
+{
+	int i;
+	for (i = 0; i < NUM_TX_BUFF; ++i) {
+		if (dev->tx_skb[i]) {
+			dev_kfree_skb(dev->tx_skb[i]);
+			dev->tx_skb[i] = NULL;
+			if (dev->tx_desc[i].ctrl & MAL_TX_CTRL_READY)
+				++dev->estats.tx_dropped;
 		}
-	} while ((i = (i + 1) % NUM_RX_BUFF) != fep->rx_slot);
-
-	PKT_DEBUG(("emac_rx_clean() exit, rx_slot: %d\n", fep->rx_slot));
-
-	return i;
+		dev->tx_desc[i].ctrl = 0;
+		dev->tx_desc[i].data_ptr = 0;
+	}
 }
 
-static void emac_rxeob_dev(void *param, u32 chanmask)
+static void emac_clean_rx_ring(struct ocp_enet_private *dev)
 {
-	struct net_device *dev = param;
-	struct ocp_enet_private *fep = dev->priv;
-	unsigned long flags;
-	int n;
+	int i;
+	for (i = 0; i < NUM_RX_BUFF; ++i)
+		if (dev->rx_skb[i]) {
+			dev->rx_desc[i].ctrl = 0;
+			dev_kfree_skb(dev->rx_skb[i]);
+			dev->rx_skb[i] = NULL;
+			dev->rx_desc[i].data_ptr = 0;
+		}
 
-	spin_lock_irqsave(&fep->lock, flags);
-	if ((n = emac_rx_clean(dev)) != fep->rx_slot)
-		emac_rx_fill(dev, n);
-	spin_unlock_irqrestore(&fep->lock, flags);
+	if (dev->rx_sg_skb) {
+		dev_kfree_skb(dev->rx_sg_skb);
+		dev->rx_sg_skb = NULL;
+	}
 }
 
-/*
- * This interrupt should never occurr, we don't program
- * the MAL for contiunous mode.
- */
-static void emac_txde_dev(void *param, u32 chanmask)
+static inline int emac_alloc_rx_skb(struct ocp_enet_private *dev, int slot,
+				    int flags)
 {
-	struct net_device *dev = param;
-	struct ocp_enet_private *fep = dev->priv;
+	struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags);
+	if (unlikely(!skb))
+		return -ENOMEM;
 
-	printk(KERN_WARNING "%s: transmit descriptor error\n", dev->name);
+	dev->rx_skb[slot] = skb;
+	dev->rx_desc[slot].data_len = 0;
 
-	emac_mac_dump(dev);
-	emac_mal_dump(dev);
+	skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
+	dev->rx_desc[slot].data_ptr = 
+	    dma_map_single(dev->ldev, skb->data - 2, dev->rx_sync_size, 
+			   DMA_FROM_DEVICE) + 2;
+	barrier();
+	dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
+	    (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
 
-	/* Reenable the transmit channel */
-	mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
+	return 0;
 }
 
-/*
- * This interrupt should be very rare at best.  This occurs when
- * the hardware has a problem with the receive descriptors.  The manual
- * states that it occurs when the hardware cannot the receive descriptor
- * empty bit is not set.  The recovery mechanism will be to
- * traverse through the descriptors, handle any that are marked to be
- * handled and reinitialize each along the way.  At that point the driver
- * will be restarted.
- */
-static void emac_rxde_dev(void *param, u32 chanmask)
+static void emac_print_link_status(struct ocp_enet_private *dev)
 {
-	struct net_device *dev = param;
-	struct ocp_enet_private *fep = dev->priv;
-	unsigned long flags;
-
-	if (net_ratelimit()) {
-		printk(KERN_WARNING "%s: receive descriptor error\n",
-		       fep->ndev->name);
+	if (netif_carrier_ok(dev->ndev))
+		printk(KERN_INFO "%s: link is up, %d %s%s\n",
+		       dev->ndev->name, dev->phy.speed,
+		       dev->phy.duplex == DUPLEX_FULL ? "FDX" : "HDX",
+		       dev->phy.pause ? ", pause enabled" :
+		       dev->phy.asym_pause ? ", assymetric pause enabled" : "");
+	else
+		printk(KERN_INFO "%s: link is down\n", dev->ndev->name);
+}
 
-		emac_mac_dump(dev);
-		emac_mal_dump(dev);
-		emac_desc_dump(dev);
+/* Process ctx, rtnl_lock semaphore */
+static int emac_open(struct net_device *ndev)
+{
+	struct ocp_enet_private *dev = ndev->priv;
+	struct ocp_func_emac_data *emacdata = dev->def->additions;
+	int err, i;
+
+	DBG("%d: open" NL, dev->def->index);
+
+	/* Setup error IRQ handler */
+	err = request_irq(dev->def->irq, emac_irq, 0, "EMAC", dev);
+	if (err) {
+		printk(KERN_ERR "%s: failed to request IRQ %d\n",
+		       ndev->name, dev->def->irq);
+		return err;
 	}
 
-	/* Disable RX channel */
-	spin_lock_irqsave(&fep->lock, flags);
-	mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
-
-	/* For now, charge the error against all emacs */
-	fep->stats.rx_errors++;
-
-	/* so do we have any good packets still? */
-	emac_rx_clean(dev);
-
-	/* When the interface is restarted it resets processing to the
-	 *  first descriptor in the table.
-	 */
-
-	fep->rx_slot = 0;
-	emac_rx_fill(dev, 0);
+	/* Allocate RX ring */
+	for (i = 0; i < NUM_RX_BUFF; ++i)
+		if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) {
+			printk(KERN_ERR "%s: failed to allocate RX ring\n",
+			       ndev->name);
+			goto oom;
+		}
 
-	set_mal_dcrn(fep->mal, DCRN_MALRXEOBISR, fep->commac.rx_chan_mask);
-	set_mal_dcrn(fep->mal, DCRN_MALRXDEIR, fep->commac.rx_chan_mask);
+	local_bh_disable();
+	dev->tx_cnt = dev->tx_slot = dev->ack_slot = dev->rx_slot =
+	    dev->commac.rx_stopped = 0;
+	dev->rx_sg_skb = NULL;
+
+	if (dev->phy.address >= 0) {
+		int link_poll_interval;
+		if (dev->phy.def->ops->poll_link(&dev->phy)) {
+			dev->phy.def->ops->read_link(&dev->phy);
+			EMAC_RX_CLK_DEFAULT(dev->def->index);
+			netif_carrier_on(dev->ndev);
+			link_poll_interval = PHY_POLL_LINK_ON;
+		} else {
+			EMAC_RX_CLK_TX(dev->def->index);
+			netif_carrier_off(dev->ndev);
+			link_poll_interval = PHY_POLL_LINK_OFF;
+		}
+		mod_timer(&dev->link_timer, jiffies + link_poll_interval);
+		emac_print_link_status(dev);
+	} else
+		netif_carrier_on(dev->ndev);
+
+	emac_configure(dev);
+	mal_poll_add(dev->mal, &dev->commac);
+	mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan);
+	mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(ndev->mtu));
+	mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+	emac_tx_enable(dev);
+	emac_rx_enable(dev);
+	netif_start_queue(ndev);
+	local_bh_enable();
 
-	/* Reenable the receive channels */
-	mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
-	spin_unlock_irqrestore(&fep->lock, flags);
+	return 0;
+      oom:
+	emac_clean_rx_ring(dev);
+	free_irq(dev->def->irq, dev);
+	return -ENOMEM;
 }
 
-static irqreturn_t
-emac_mac_irq(int irq, void *dev_instance, struct pt_regs *regs)
+/* BHs disabled */
+static int emac_link_differs(struct ocp_enet_private *dev)
 {
-	struct net_device *dev = dev_instance;
-	struct ocp_enet_private *fep = dev->priv;
-	emac_t *emacp = fep->emacp;
-	unsigned long tmp_em0isr;
+	u32 r = in_be32(&dev->emacp->mr1);
 
-	/* EMAC interrupt */
-	tmp_em0isr = in_be32(&emacp->em0isr);
-	if (tmp_em0isr & (EMAC_ISR_TE0 | EMAC_ISR_TE1)) {
-		/* This error is a hard transmit error - could retransmit */
-		fep->stats.tx_errors++;
+	int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF;
+	int speed, pause, asym_pause;
 
-		/* Reenable the transmit channel */
-		mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
+	if (r & (EMAC_MR1_MF_1000 | EMAC_MR1_MF_1000GPCS))
+		speed = SPEED_1000;
+	else if (r & EMAC_MR1_MF_100)
+		speed = SPEED_100;
+	else
+		speed = SPEED_10;
 
-	} else {
-		fep->stats.rx_errors++;
+	switch (r & (EMAC_MR1_EIFC | EMAC_MR1_APP)) {
+	case (EMAC_MR1_EIFC | EMAC_MR1_APP):
+		pause = 1;
+		asym_pause = 0;
+		break;
+	case EMAC_MR1_APP:
+		pause = 0;
+		asym_pause = 1;
+		break;
+	default:
+		pause = asym_pause = 0;
 	}
-
-	if (tmp_em0isr & EMAC_ISR_RP)
-		fep->stats.rx_length_errors++;
-	if (tmp_em0isr & EMAC_ISR_ALE)
-		fep->stats.rx_frame_errors++;
-	if (tmp_em0isr & EMAC_ISR_BFCS)
-		fep->stats.rx_crc_errors++;
-	if (tmp_em0isr & EMAC_ISR_PTLE)
-		fep->stats.rx_length_errors++;
-	if (tmp_em0isr & EMAC_ISR_ORE)
-		fep->stats.rx_length_errors++;
-	if (tmp_em0isr & EMAC_ISR_TE0)
-		fep->stats.tx_aborted_errors++;
-
-	emac_err_dump(dev, tmp_em0isr);
-
-	out_be32(&emacp->em0isr, tmp_em0isr);
-
-	return IRQ_HANDLED;
+	return speed != dev->phy.speed || duplex != dev->phy.duplex ||
+	    pause != dev->phy.pause || asym_pause != dev->phy.asym_pause;
 }
 
-static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
+/* BHs disabled */
+static void emac_link_timer(unsigned long data)
 {
-	unsigned short ctrl;
-	unsigned long flags;
-	struct ocp_enet_private *fep = dev->priv;
-	emac_t *emacp = fep->emacp;
-	int len = skb->len;
-	unsigned int offset = 0, size, f, tx_slot_first;
-	unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
+	struct ocp_enet_private *dev = (struct ocp_enet_private *)data;
+	int link_poll_interval;
 
-	spin_lock_irqsave(&fep->lock, flags);
+	DBG2("%d: link timer" NL, dev->def->index);
 
-	len -= skb->data_len;
+	if (dev->phy.def->ops->poll_link(&dev->phy)) {
+		if (!netif_carrier_ok(dev->ndev)) {
+			EMAC_RX_CLK_DEFAULT(dev->def->index);
 
-	if ((fep->tx_cnt + nr_frags + len / DESC_BUF_SIZE + 1) > NUM_TX_BUFF) {
-		PKT_DEBUG(("emac_start_xmit() stopping queue\n"));
-		netif_stop_queue(dev);
-		spin_unlock_irqrestore(&fep->lock, flags);
-		return -EBUSY;
-	}
+			/* Get new link parameters */
+			dev->phy.def->ops->read_link(&dev->phy);
 
-	tx_slot_first = fep->tx_slot;
+			if (dev->tah_dev || emac_link_differs(dev))
+				emac_full_tx_reset(dev->ndev);
 
-	while (len) {
-		size = min(len, DESC_BUF_SIZE);
-
-		fep->tx_desc[fep->tx_slot].data_len = (short)size;
-		fep->tx_desc[fep->tx_slot].data_ptr =
-		    (unsigned char *)dma_map_single(&fep->ocpdev->dev,
-						    (void *)((unsigned int)skb->
-							     data + offset),
-						    size, DMA_TO_DEVICE);
-
-		ctrl = EMAC_TX_CTRL_DFLT;
-		if (fep->tx_slot != tx_slot_first)
-			ctrl |= MAL_TX_CTRL_READY;
-		if ((NUM_TX_BUFF - 1) == fep->tx_slot)
-			ctrl |= MAL_TX_CTRL_WRAP;
-		if (!nr_frags && (len == size)) {
-			ctrl |= MAL_TX_CTRL_LAST;
-			fep->tx_skb[fep->tx_slot] = skb;
+			netif_carrier_on(dev->ndev);
+			emac_print_link_status(dev);
+		}
+		link_poll_interval = PHY_POLL_LINK_ON;
+	} else {
+		if (netif_carrier_ok(dev->ndev)) {
+			EMAC_RX_CLK_TX(dev->def->index);
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX)
+			emac_reinitialize(dev);
+#endif
+			netif_carrier_off(dev->ndev);
+			emac_print_link_status(dev);
 		}
-		if (skb->ip_summed == CHECKSUM_HW)
-			ctrl |= EMAC_TX_CTRL_TAH_CSUM;
 
-		fep->tx_desc[fep->tx_slot].ctrl = ctrl;
+		/* Retry reset if the previous attempt failed.
+		 * This is needed mostly for CONFIG_IBM_EMAC_PHY_RX_CLK_FIX
+		 * case, but I left it here because it shouldn't trigger for
+		 * sane PHYs anyway.
+		 */
+		if (unlikely(dev->reset_failed))
+			emac_reinitialize(dev);
 
-		len -= size;
-		offset += size;
+		link_poll_interval = PHY_POLL_LINK_OFF;
+	}
+	mod_timer(&dev->link_timer, jiffies + link_poll_interval);
+}
 
-		/* Bump tx count */
-		if (++fep->tx_cnt == NUM_TX_BUFF)
-			netif_stop_queue(dev);
+/* BHs disabled */
+static void emac_force_link_update(struct ocp_enet_private *dev)
+{
+	netif_carrier_off(dev->ndev);
+	if (timer_pending(&dev->link_timer))
+		mod_timer(&dev->link_timer, jiffies + PHY_POLL_LINK_OFF);
+}
 
-		/* Next descriptor */
-		if (++fep->tx_slot == NUM_TX_BUFF)
-			fep->tx_slot = 0;
-	}
+/* Process ctx, rtnl_lock semaphore */
+static int emac_close(struct net_device *ndev)
+{
+	struct ocp_enet_private *dev = ndev->priv;
+	struct ocp_func_emac_data *emacdata = dev->def->additions;
 
-	for (f = 0; f < nr_frags; f++) {
-		struct skb_frag_struct *frag;
+	DBG("%d: close" NL, dev->def->index);
 
-		frag = &skb_shinfo(skb)->frags[f];
-		len = frag->size;
-		offset = 0;
-
-		while (len) {
-			size = min(len, DESC_BUF_SIZE);
-
-			dma_map_page(&fep->ocpdev->dev,
-				     frag->page,
-				     frag->page_offset + offset,
-				     size, DMA_TO_DEVICE);
-
-			ctrl = EMAC_TX_CTRL_DFLT | MAL_TX_CTRL_READY;
-			if ((NUM_TX_BUFF - 1) == fep->tx_slot)
-				ctrl |= MAL_TX_CTRL_WRAP;
-			if ((f == (nr_frags - 1)) && (len == size)) {
-				ctrl |= MAL_TX_CTRL_LAST;
-				fep->tx_skb[fep->tx_slot] = skb;
-			}
+	local_bh_disable();
 
-			if (skb->ip_summed == CHECKSUM_HW)
-				ctrl |= EMAC_TX_CTRL_TAH_CSUM;
+	if (dev->phy.address >= 0)
+		del_timer_sync(&dev->link_timer);
 
-			fep->tx_desc[fep->tx_slot].data_len = (short)size;
-			fep->tx_desc[fep->tx_slot].data_ptr =
-			    (char *)((page_to_pfn(frag->page) << PAGE_SHIFT) +
-				     frag->page_offset + offset);
-			fep->tx_desc[fep->tx_slot].ctrl = ctrl;
+	netif_stop_queue(ndev);
+	emac_rx_disable(dev);
+	emac_tx_disable(dev);
+	mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+	mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan);
+	mal_poll_del(dev->mal, &dev->commac);
+	local_bh_enable();
 
-			len -= size;
-			offset += size;
+	emac_clean_tx_ring(dev);
+	emac_clean_rx_ring(dev);
+	free_irq(dev->def->irq, dev);
 
-			/* Bump tx count */
-			if (++fep->tx_cnt == NUM_TX_BUFF)
-				netif_stop_queue(dev);
+	return 0;
+}
 
-			/* Next descriptor */
-			if (++fep->tx_slot == NUM_TX_BUFF)
-				fep->tx_slot = 0;
-		}
+static inline u16 emac_tx_csum(struct ocp_enet_private *dev,
+			       struct sk_buff *skb)
+{
+#if defined(CONFIG_IBM_EMAC_TAH)
+	if (skb->ip_summed == CHECKSUM_HW) {
+		++dev->stats.tx_packets_csum;
+		return EMAC_TX_CTRL_TAH_CSUM;
 	}
+#endif
+	return 0;
+}
 
-	/*
-	 * Deferred set READY on first descriptor of packet to
-	 * avoid TX MAL race.
-	 */
-	fep->tx_desc[tx_slot_first].ctrl |= MAL_TX_CTRL_READY;
-
-	/* Send the packet out. */
-	out_be32(&emacp->em0tmr0, EMAC_TMR0_XMIT);
+static inline int emac_xmit_finish(struct ocp_enet_private *dev, int len)
+{
+	struct emac_regs *p = dev->emacp;
+	struct net_device *ndev = dev->ndev;
 
-	fep->stats.tx_packets++;
-	fep->stats.tx_bytes += skb->len;
+	/* Send the packet out */
+	out_be32(&p->tmr0, EMAC_TMR0_XMIT);
 
-	PKT_DEBUG(("emac_start_xmit() exitn"));
+	if (unlikely(++dev->tx_cnt == NUM_TX_BUFF)) {
+		netif_stop_queue(ndev);
+		DBG2("%d: stopped TX queue" NL, dev->def->index);
+	}
 
-	spin_unlock_irqrestore(&fep->lock, flags);
+	ndev->trans_start = jiffies;
+	++dev->stats.tx_packets;
+	dev->stats.tx_bytes += len;
 
 	return 0;
 }
 
-static int emac_adjust_to_link(struct ocp_enet_private *fep)
+/* BHs disabled */
+static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
-	emac_t *emacp = fep->emacp;
-	unsigned long mode_reg;
-	int full_duplex, speed;
+	struct ocp_enet_private *dev = ndev->priv;
+	unsigned int len = skb->len;
+	int slot;
 
-	full_duplex = 0;
-	speed = SPEED_10;
+	u16 ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY |
+	    MAL_TX_CTRL_LAST | emac_tx_csum(dev, skb);
 
-	/* set mode register 1 defaults */
-	mode_reg = EMAC_M1_DEFAULT;
-
-	/* Read link mode on PHY */
-	if (fep->phy_mii.def->ops->read_link(&fep->phy_mii) == 0) {
-		/* If an error occurred, we don't deal with it yet */
-		full_duplex = (fep->phy_mii.duplex == DUPLEX_FULL);
-		speed = fep->phy_mii.speed;
+	slot = dev->tx_slot++;
+	if (dev->tx_slot == NUM_TX_BUFF) {
+		dev->tx_slot = 0;
+		ctrl |= MAL_TX_CTRL_WRAP;
 	}
 
+	DBG2("%d: xmit(%u) %d" NL, dev->def->index, len, slot);
 
-	/* set speed (default is 10Mb) */
-	switch (speed) {
-	case SPEED_1000:
-		mode_reg |= EMAC_M1_RFS_16K;
-		if (fep->rgmii_dev) {
-			struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(fep->rgmii_dev);
-
-			if ((rgmii->mode[fep->rgmii_input] == RTBI)
-			    || (rgmii->mode[fep->rgmii_input] == TBI))
-				mode_reg |= EMAC_M1_MF_1000GPCS;
-			else
-				mode_reg |= EMAC_M1_MF_1000MBPS;
-
-			emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
-					      1000);
-		}
-		break;
-	case SPEED_100:
-		mode_reg |= EMAC_M1_MF_100MBPS | EMAC_M1_RFS_4K;
-		if (fep->rgmii_dev)
-			emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
-					      100);
-		if (fep->zmii_dev)
-			emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input,
-					     100);
-		break;
-	case SPEED_10:
-	default:
-		mode_reg = (mode_reg & ~EMAC_M1_MF_100MBPS) | EMAC_M1_RFS_4K;
-		if (fep->rgmii_dev)
-			emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
-					      10);
-		if (fep->zmii_dev)
-			emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input,
-					     10);
-	}
-
-	if (full_duplex)
-		mode_reg |= EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_IST;
-	else
-		mode_reg &= ~(EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_ILE);
+	dev->tx_skb[slot] = skb;
+	dev->tx_desc[slot].data_ptr = dma_map_single(dev->ldev, skb->data, len,
+						     DMA_TO_DEVICE);
+	dev->tx_desc[slot].data_len = (u16) len;
+	barrier();
+	dev->tx_desc[slot].ctrl = ctrl;
 
-	LINK_DEBUG(("%s: adjust to link, speed: %d, duplex: %d, opened: %d\n",
-		    fep->ndev->name, speed, full_duplex, fep->opened));
-
-	printk(KERN_INFO "%s: Speed: %d, %s duplex.\n",
-	       fep->ndev->name, speed, full_duplex ? "Full" : "Half");
-	if (fep->opened)
-		out_be32(&emacp->em0mr1, mode_reg);
-
-	return 0;
+	return emac_xmit_finish(dev, len);
 }
 
-static int emac_set_mac_address(struct net_device *ndev, void *p)
+#if defined(CONFIG_IBM_EMAC_TAH)
+static inline int emac_xmit_split(struct ocp_enet_private *dev, int slot,
+				  u32 pd, int len, int last, u16 base_ctrl)
 {
-	struct ocp_enet_private *fep = ndev->priv;
-	emac_t *emacp = fep->emacp;
-	struct sockaddr *addr = p;
+	while (1) {
+		u16 ctrl = base_ctrl;
+		int chunk = min(len, MAL_MAX_TX_SIZE);
+		len -= chunk;
 
-	if (!is_valid_ether_addr(addr->sa_data))
-		return -EADDRNOTAVAIL;
+		slot = (slot + 1) % NUM_TX_BUFF;
 
-	memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
+		if (last && !len)
+			ctrl |= MAL_TX_CTRL_LAST;
+		if (slot == NUM_TX_BUFF - 1)
+			ctrl |= MAL_TX_CTRL_WRAP;
 
-	/* set the high address */
-	out_be32(&emacp->em0iahr,
-		 (fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]);
+		dev->tx_skb[slot] = NULL;
+		dev->tx_desc[slot].data_ptr = pd;
+		dev->tx_desc[slot].data_len = (u16) chunk;
+		dev->tx_desc[slot].ctrl = ctrl;
+		++dev->tx_cnt;
 
-	/* set the low address */
-	out_be32(&emacp->em0ialr,
-		 (fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16)
-		 | (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]);
+		if (!len)
+			break;
 
-	return 0;
+		pd += chunk;
+	}
+	return slot;
 }
 
-static int emac_change_mtu(struct net_device *dev, int new_mtu)
+/* BHs disabled (SG version for TAH equipped EMACs) */
+static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev)
 {
-	struct ocp_enet_private *fep = dev->priv;
-	int old_mtu = dev->mtu;
-	unsigned long mode_reg;
-	emac_t *emacp = fep->emacp;
-	u32 em0mr0;
-	int i, full;
-	unsigned long flags;
+	struct ocp_enet_private *dev = ndev->priv;
+	int nr_frags = skb_shinfo(skb)->nr_frags;
+	int len = skb->len, chunk;
+	int slot, i;
+	u16 ctrl;
+	u32 pd;
 
-	if ((new_mtu < EMAC_MIN_MTU) || (new_mtu > EMAC_MAX_MTU)) {
-		printk(KERN_ERR
-		       "emac: Invalid MTU setting, MTU must be between %d and %d\n",
-		       EMAC_MIN_MTU, EMAC_MAX_MTU);
-		return -EINVAL;
-	}
+	/* This is common "fast" path */
+	if (likely(!nr_frags && len <= MAL_MAX_TX_SIZE))
+		return emac_start_xmit(skb, ndev);
 
-	if (old_mtu != new_mtu && netif_running(dev)) {
-		/* Stop rx engine */
-		em0mr0 = in_be32(&emacp->em0mr0);
-		out_be32(&emacp->em0mr0, em0mr0 & ~EMAC_M0_RXE);
-
-		/* Wait for descriptors to be empty */
-		do {
-			full = 0;
-			for (i = 0; i < NUM_RX_BUFF; i++)
-				if (!(fep->rx_desc[i].ctrl & MAL_RX_CTRL_EMPTY)) {
-					printk(KERN_NOTICE
-					       "emac: RX ring is still full\n");
-					full = 1;
-				}
-		} while (full);
-
-		spin_lock_irqsave(&fep->lock, flags);
-
-		mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
-
-		/* Destroy all old rx skbs */
-		for (i = 0; i < NUM_RX_BUFF; i++) {
-			dma_unmap_single(&fep->ocpdev->dev,
-					 fep->rx_desc[i].data_ptr,
-					 fep->rx_desc[i].data_len,
-					 DMA_FROM_DEVICE);
-			dev_kfree_skb(fep->rx_skb[i]);
-			fep->rx_skb[i] = NULL;
-		}
+	len -= skb->data_len;
 
-		/* Set new rx_buffer_size, jumbo cap, and advertise new mtu */
-		mode_reg = in_be32(&emacp->em0mr1);
-		if (new_mtu > ENET_DEF_MTU_SIZE) {
-			mode_reg |= EMAC_M1_JUMBO_ENABLE;
-			fep->rx_buffer_size = EMAC_MAX_FRAME;
-		} else {
-			mode_reg &= ~EMAC_M1_JUMBO_ENABLE;
-			fep->rx_buffer_size = ENET_DEF_BUF_SIZE;
-		}
-		dev->mtu = new_mtu;
-		out_be32(&emacp->em0mr1, mode_reg);
+	/* Note, this is only an *estimation*, we can still run out of empty
+	 * slots because of the additional fragmentation into
+	 * MAL_MAX_TX_SIZE-sized chunks
+	 */
+	if (unlikely(dev->tx_cnt + nr_frags + mal_tx_chunks(len) > NUM_TX_BUFF))
+		goto stop_queue;
+
+	ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY |
+	    emac_tx_csum(dev, skb);
+	slot = dev->tx_slot;
+
+	/* skb data */
+	dev->tx_skb[slot] = NULL;
+	chunk = min(len, MAL_MAX_TX_SIZE);
+	dev->tx_desc[slot].data_ptr = pd =
+	    dma_map_single(dev->ldev, skb->data, len, DMA_TO_DEVICE);
+	dev->tx_desc[slot].data_len = (u16) chunk;
+	len -= chunk;
+	if (unlikely(len))
+		slot = emac_xmit_split(dev, slot, pd + chunk, len, !nr_frags,
+				       ctrl);
+	/* skb fragments */
+	for (i = 0; i < nr_frags; ++i) {
+		struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
+		len = frag->size;
 
-		/* Re-init rx skbs */
-		fep->rx_slot = 0;
-		emac_rx_fill(dev, 0);
+		if (unlikely(dev->tx_cnt + mal_tx_chunks(len) >= NUM_TX_BUFF))
+			goto undo_frame;
 
-		/* Restart the rx engine */
-		mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
-		out_be32(&emacp->em0mr0, em0mr0 | EMAC_M0_RXE);
+		pd = dma_map_page(dev->ldev, frag->page, frag->page_offset, len,
+				  DMA_TO_DEVICE);
 
-		spin_unlock_irqrestore(&fep->lock, flags);
+		slot = emac_xmit_split(dev, slot, pd, len, i == nr_frags - 1,
+				       ctrl);
 	}
 
-	return 0;
-}
+	DBG2("%d: xmit_sg(%u) %d - %d" NL, dev->def->index, skb->len,
+	     dev->tx_slot, slot);
 
-static void __emac_set_multicast_list(struct net_device *dev)
-{
-	struct ocp_enet_private *fep = dev->priv;
-	emac_t *emacp = fep->emacp;
-	u32 rmr = in_be32(&emacp->em0rmr);
+	/* Attach skb to the last slot so we don't release it too early */
+	dev->tx_skb[slot] = skb;
 
-	/* First clear all special bits, they can be set later */
-	rmr &= ~(EMAC_RMR_PME | EMAC_RMR_PMME | EMAC_RMR_MAE);
+	/* Send the packet out */
+	if (dev->tx_slot == NUM_TX_BUFF - 1)
+		ctrl |= MAL_TX_CTRL_WRAP;
+	barrier();
+	dev->tx_desc[dev->tx_slot].ctrl = ctrl;
+	dev->tx_slot = (slot + 1) % NUM_TX_BUFF;
 
-	if (dev->flags & IFF_PROMISC) {
-		rmr |= EMAC_RMR_PME;
-	} else if (dev->flags & IFF_ALLMULTI || 32 < dev->mc_count) {
-		/*
-		 * Must be setting up to use multicast
-		 * Now check for promiscuous multicast
-		 */
-		rmr |= EMAC_RMR_PMME;
-	} else if (dev->flags & IFF_MULTICAST && 0 < dev->mc_count) {
-		unsigned short em0gaht[4] = { 0, 0, 0, 0 };
-		struct dev_mc_list *dmi;
-
-		/* Need to hash on the multicast address. */
-		for (dmi = dev->mc_list; dmi; dmi = dmi->next) {
-			unsigned long mc_crc;
-			unsigned int bit_number;
-
-			mc_crc = ether_crc(6, (char *)dmi->dmi_addr);
-			bit_number = 63 - (mc_crc >> 26);	/* MSB: 0 LSB: 63 */
-			em0gaht[bit_number >> 4] |=
-			    0x8000 >> (bit_number & 0x0f);
-		}
-		emacp->em0gaht1 = em0gaht[0];
-		emacp->em0gaht2 = em0gaht[1];
-		emacp->em0gaht3 = em0gaht[2];
-		emacp->em0gaht4 = em0gaht[3];
+	return emac_xmit_finish(dev, skb->len);
 
-		/* Turn on multicast addressing */
-		rmr |= EMAC_RMR_MAE;
+      undo_frame:
+	/* Well, too bad. Our previous estimation was overly optimistic. 
+	 * Undo everything.
+	 */
+	while (slot != dev->tx_slot) {
+		dev->tx_desc[slot].ctrl = 0;
+		--dev->tx_cnt;
+		if (--slot < 0)
+			slot = NUM_TX_BUFF - 1;
 	}
-	out_be32(&emacp->em0rmr, rmr);
+	++dev->estats.tx_undo;
+
+      stop_queue:
+	netif_stop_queue(ndev);
+	DBG2("%d: stopped TX queue" NL, dev->def->index);
+	return 1;
 }
+#else
+# define emac_start_xmit_sg	emac_start_xmit
+#endif	/* !defined(CONFIG_IBM_EMAC_TAH) */
 
-static int emac_init_tah(struct ocp_enet_private *fep)
+/* BHs disabled */
+static void emac_parse_tx_error(struct ocp_enet_private *dev, u16 ctrl)
 {
-	tah_t *tahp;
+	struct ibm_emac_error_stats *st = &dev->estats;
+	DBG("%d: BD TX error %04x" NL, dev->def->index, ctrl);
+
+	++st->tx_bd_errors;
+	if (ctrl & EMAC_TX_ST_BFCS)
+		++st->tx_bd_bad_fcs;
+	if (ctrl & EMAC_TX_ST_LCS)
+		++st->tx_bd_carrier_loss;
+	if (ctrl & EMAC_TX_ST_ED)
+		++st->tx_bd_excessive_deferral;
+	if (ctrl & EMAC_TX_ST_EC)
+		++st->tx_bd_excessive_collisions;
+	if (ctrl & EMAC_TX_ST_LC)
+		++st->tx_bd_late_collision;
+	if (ctrl & EMAC_TX_ST_MC)
+		++st->tx_bd_multple_collisions;
+	if (ctrl & EMAC_TX_ST_SC)
+		++st->tx_bd_single_collision;
+	if (ctrl & EMAC_TX_ST_UR)
+		++st->tx_bd_underrun;
+	if (ctrl & EMAC_TX_ST_SQE)
+		++st->tx_bd_sqe;
+}
 
-	/* Initialize TAH and enable checksum verification */
-	tahp = (tah_t *) ioremap(fep->tah_dev->def->paddr, sizeof(*tahp));
+static void emac_poll_tx(void *param)
+{
+	struct ocp_enet_private *dev = param;
+	DBG2("%d: poll_tx, %d %d" NL, dev->def->index, dev->tx_cnt,
+	     dev->ack_slot);
+
+	if (dev->tx_cnt) {
+		u16 ctrl;
+		int slot = dev->ack_slot, n = 0;
+	      again:
+		ctrl = dev->tx_desc[slot].ctrl;
+		if (!(ctrl & MAL_TX_CTRL_READY)) {
+			struct sk_buff *skb = dev->tx_skb[slot];
+			++n;
+
+			if (skb) {
+				dev_kfree_skb(skb);
+				dev->tx_skb[slot] = NULL;
+			}
+			slot = (slot + 1) % NUM_TX_BUFF;
 
-	if (tahp == NULL) {
-		printk(KERN_ERR "tah%d: Cannot ioremap TAH registers!\n",
-		       fep->tah_dev->def->index);
+			if (unlikely(EMAC_IS_BAD_TX(ctrl)))
+				emac_parse_tx_error(dev, ctrl);
 
-		return -ENOMEM;
-	}
-
-	out_be32(&tahp->tah_mr, TAH_MR_SR);
+			if (--dev->tx_cnt)
+				goto again;
+		}
+		if (n) {
+			dev->ack_slot = slot;
+			if (netif_queue_stopped(dev->ndev) &&
+			    dev->tx_cnt < EMAC_TX_WAKEUP_THRESH)
+				netif_wake_queue(dev->ndev);
 
-	/* wait for reset to complete */
-	while (in_be32(&tahp->tah_mr) & TAH_MR_SR) ;
+			DBG2("%d: tx %d pkts" NL, dev->def->index, n);
+		}
+	}
+}
 
-	/* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
-	out_be32(&tahp->tah_mr,
-		 TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
-		 TAH_MR_DIG);
+static inline void emac_recycle_rx_skb(struct ocp_enet_private *dev, int slot,
+				       int len)
+{
+	struct sk_buff *skb = dev->rx_skb[slot];
+	DBG2("%d: recycle %d %d" NL, dev->def->index, slot, len);
 
-	iounmap(tahp);
+	if (len) 
+		dma_map_single(dev->ldev, skb->data - 2, 
+			       EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE);
 
-	return 0;
+	dev->rx_desc[slot].data_len = 0;
+	barrier();
+	dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
+	    (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
 }
 
-static void emac_init_rings(struct net_device *dev)
+static void emac_parse_rx_error(struct ocp_enet_private *dev, u16 ctrl)
 {
-	struct ocp_enet_private *ep = dev->priv;
-	int loop;
+	struct ibm_emac_error_stats *st = &dev->estats;
+	DBG("%d: BD RX error %04x" NL, dev->def->index, ctrl);
+
+	++st->rx_bd_errors;
+	if (ctrl & EMAC_RX_ST_OE)
+		++st->rx_bd_overrun;
+	if (ctrl & EMAC_RX_ST_BP)
+		++st->rx_bd_bad_packet;
+	if (ctrl & EMAC_RX_ST_RP)
+		++st->rx_bd_runt_packet;
+	if (ctrl & EMAC_RX_ST_SE)
+		++st->rx_bd_short_event;
+	if (ctrl & EMAC_RX_ST_AE)
+		++st->rx_bd_alignment_error;
+	if (ctrl & EMAC_RX_ST_BFCS)
+		++st->rx_bd_bad_fcs;
+	if (ctrl & EMAC_RX_ST_PTL)
+		++st->rx_bd_packet_too_long;
+	if (ctrl & EMAC_RX_ST_ORE)
+		++st->rx_bd_out_of_range;
+	if (ctrl & EMAC_RX_ST_IRE)
+		++st->rx_bd_in_range;
+}
 
-	ep->tx_desc = (struct mal_descriptor *)((char *)ep->mal->tx_virt_addr +
-						(ep->mal_tx_chan *
-						 MAL_DT_ALIGN));
-	ep->rx_desc =
-	    (struct mal_descriptor *)((char *)ep->mal->rx_virt_addr +
-				      (ep->mal_rx_chan * MAL_DT_ALIGN));
+static inline void emac_rx_csum(struct ocp_enet_private *dev,
+				struct sk_buff *skb, u16 ctrl)
+{
+#if defined(CONFIG_IBM_EMAC_TAH)
+	if (!ctrl && dev->tah_dev) {
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+		++dev->stats.rx_packets_csum;
+	}
+#endif
+}
 
-	/* Fill in the transmit descriptor ring. */
-	for (loop = 0; loop < NUM_TX_BUFF; loop++) {
-		if (ep->tx_skb[loop]) {
-			dma_unmap_single(&ep->ocpdev->dev,
-					 ep->tx_desc[loop].data_ptr,
-					 ep->tx_desc[loop].data_len,
-					 DMA_TO_DEVICE);
-			dev_kfree_skb_irq(ep->tx_skb[loop]);
+static inline int emac_rx_sg_append(struct ocp_enet_private *dev, int slot)
+{
+	if (likely(dev->rx_sg_skb != NULL)) {
+		int len = dev->rx_desc[slot].data_len;
+		int tot_len = dev->rx_sg_skb->len + len;
+
+		if (unlikely(tot_len + 2 > dev->rx_skb_size)) {
+			++dev->estats.rx_dropped_mtu;
+			dev_kfree_skb(dev->rx_sg_skb);
+			dev->rx_sg_skb = NULL;
+		} else {
+			cacheable_memcpy(dev->rx_sg_skb->tail,
+					 dev->rx_skb[slot]->data, len);
+			skb_put(dev->rx_sg_skb, len);
+			emac_recycle_rx_skb(dev, slot, len);
+			return 0;
 		}
-		ep->tx_skb[loop] = NULL;
-		ep->tx_desc[loop].ctrl = 0;
-		ep->tx_desc[loop].data_len = 0;
-		ep->tx_desc[loop].data_ptr = NULL;
-	}
-	ep->tx_desc[loop - 1].ctrl |= MAL_TX_CTRL_WRAP;
-
-	/* Format the receive descriptor ring. */
-	ep->rx_slot = 0;
-	/* Default is MTU=1500 + Ethernet overhead */
-	ep->rx_buffer_size = dev->mtu + ENET_HEADER_SIZE + ENET_FCS_SIZE;
-	emac_rx_fill(dev, 0);
-	if (ep->rx_slot != 0) {
-		printk(KERN_ERR
-		       "%s: Not enough mem for RxChain durning Open?\n",
-		       dev->name);
-		/*We couldn't fill the ring at startup?
-		 *We could clean up and fail to open but right now we will try to
-		 *carry on. It may be a sign of a bad NUM_RX_BUFF value
-		 */
 	}
-
-	ep->tx_cnt = 0;
-	ep->tx_slot = 0;
-	ep->ack_slot = 0;
+	emac_recycle_rx_skb(dev, slot, 0);
+	return -1;
 }
 
-static void emac_reset_configure(struct ocp_enet_private *fep)
+/* BHs disabled */
+static int emac_poll_rx(void *param, int budget)
 {
-	emac_t *emacp = fep->emacp;
-	int i;
-
-	mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
-	mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
+	struct ocp_enet_private *dev = param;
+	int slot = dev->rx_slot, received = 0;
 
-	/*
-	 * Check for a link, some PHYs don't provide a clock if
-	 * no link is present.  Some EMACs will not come out of
-	 * soft reset without a PHY clock present.
-	 */
-	if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) {
-		/* Reset the EMAC */
-		out_be32(&emacp->em0mr0, EMAC_M0_SRST);
-		udelay(20);
-		for (i = 0; i < 100; i++) {
-			if ((in_be32(&emacp->em0mr0) & EMAC_M0_SRST) == 0)
-				break;
-			udelay(10);
-		}
-
-		if (i >= 100) {
-			printk(KERN_ERR "%s: Cannot reset EMAC\n",
-			       fep->ndev->name);
-			return;
-		}
-	}
+	DBG2("%d: poll_rx(%d)" NL, dev->def->index, budget);
 
-	/* Switch IRQs off for now */
-	out_be32(&emacp->em0iser, 0);
+      again:
+	while (budget > 0) {
+		int len;
+		struct sk_buff *skb;
+		u16 ctrl = dev->rx_desc[slot].ctrl;
 
-	/* Configure MAL rx channel */
-	mal_set_rcbs(fep->mal, fep->mal_rx_chan, DESC_BUF_SIZE_REG);
+		if (ctrl & MAL_RX_CTRL_EMPTY)
+			break;
 
-	/* set the high address */
-	out_be32(&emacp->em0iahr,
-		 (fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]);
+		skb = dev->rx_skb[slot];
+		barrier();
+		len = dev->rx_desc[slot].data_len;
 
-	/* set the low address */
-	out_be32(&emacp->em0ialr,
-		 (fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16)
-		 | (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]);
+		if (unlikely(!MAL_IS_SINGLE_RX(ctrl)))
+			goto sg;
 
-	/* Adjust to link */
-	if (netif_carrier_ok(fep->ndev))
-		emac_adjust_to_link(fep);
+		ctrl &= EMAC_BAD_RX_MASK;
+		if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) {
+			emac_parse_rx_error(dev, ctrl);
+			++dev->estats.rx_dropped_error;
+			emac_recycle_rx_skb(dev, slot, 0);
+			len = 0;
+			goto next;
+		}
 
-	/* enable broadcast/individual address and RX FIFO defaults */
-	out_be32(&emacp->em0rmr, EMAC_RMR_DEFAULT);
+		if (len && len < EMAC_RX_COPY_THRESH) {
+			struct sk_buff *copy_skb =
+			    alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC);
+			if (unlikely(!copy_skb))
+				goto oom;
+
+			skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2);
+			cacheable_memcpy(copy_skb->data - 2, skb->data - 2,
+					 len + 2);
+			emac_recycle_rx_skb(dev, slot, len);
+			skb = copy_skb;
+		} else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC)))
+			goto oom;
+
+		skb_put(skb, len);
+	      push_packet:
+		skb->dev = dev->ndev;
+		skb->protocol = eth_type_trans(skb, dev->ndev);
+		emac_rx_csum(dev, skb, ctrl);
+
+		if (unlikely(netif_receive_skb(skb) == NET_RX_DROP))
+			++dev->estats.rx_dropped_stack;
+	      next:
+		++dev->stats.rx_packets;
+	      skip:
+		dev->stats.rx_bytes += len;
+		slot = (slot + 1) % NUM_RX_BUFF;
+		--budget;
+		++received;
+		continue;
+	      sg:
+		if (ctrl & MAL_RX_CTRL_FIRST) {
+			BUG_ON(dev->rx_sg_skb);
+			if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) {
+				DBG("%d: rx OOM %d" NL, dev->def->index, slot);
+				++dev->estats.rx_dropped_oom;
+				emac_recycle_rx_skb(dev, slot, 0);
+			} else {
+				dev->rx_sg_skb = skb;
+				skb_put(skb, len);
+			}
+		} else if (!emac_rx_sg_append(dev, slot) &&
+			   (ctrl & MAL_RX_CTRL_LAST)) {
+
+			skb = dev->rx_sg_skb;
+			dev->rx_sg_skb = NULL;
+
+			ctrl &= EMAC_BAD_RX_MASK;
+			if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) {
+				emac_parse_rx_error(dev, ctrl);
+				++dev->estats.rx_dropped_error;
+				dev_kfree_skb(skb);
+				len = 0;
+			} else
+				goto push_packet;
+		}
+		goto skip;
+	      oom:
+		DBG("%d: rx OOM %d" NL, dev->def->index, slot);
+		/* Drop the packet and recycle skb */
+		++dev->estats.rx_dropped_oom;
+		emac_recycle_rx_skb(dev, slot, 0);
+		goto next;
+	}
 
-	/* set transmit request threshold register */
-	out_be32(&emacp->em0trtr, EMAC_TRTR_DEFAULT);
+	if (received) {
+		DBG2("%d: rx %d BDs" NL, dev->def->index, received);
+		dev->rx_slot = slot;
+	}
 
-	/* Reconfigure multicast */
-	__emac_set_multicast_list(fep->ndev);
+	if (unlikely(budget && dev->commac.rx_stopped)) {
+		struct ocp_func_emac_data *emacdata = dev->def->additions;
 
-	/* Set receiver/transmitter defaults */
-	out_be32(&emacp->em0rwmr, EMAC_RWMR_DEFAULT);
-	out_be32(&emacp->em0tmr0, EMAC_TMR0_DEFAULT);
-	out_be32(&emacp->em0tmr1, EMAC_TMR1_DEFAULT);
+		barrier();
+		if (!(dev->rx_desc[slot].ctrl & MAL_RX_CTRL_EMPTY)) {
+			DBG2("%d: rx restart" NL, dev->def->index);
+			received = 0;
+			goto again;
+		}
 
-	/* set frame gap */
-	out_be32(&emacp->em0ipgvr, CONFIG_IBM_EMAC_FGAP);
-	
-	/* set VLAN Tag Protocol Identifier */
-	out_be32(&emacp->em0vtpid, 0x8100);
+		if (dev->rx_sg_skb) {
+			DBG2("%d: dropping partial rx packet" NL,
+			     dev->def->index);
+			++dev->estats.rx_dropped_error;
+			dev_kfree_skb(dev->rx_sg_skb);
+			dev->rx_sg_skb = NULL;
+		}
 
-	/* Init ring buffers */
-	emac_init_rings(fep->ndev);
+		dev->commac.rx_stopped = 0;
+		mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+		emac_rx_enable(dev);
+		dev->rx_slot = 0;
+	}
+	return received;
 }
 
-static void emac_kick(struct ocp_enet_private *fep)
+/* BHs disabled */
+static int emac_peek_rx(void *param)
 {
-	emac_t *emacp = fep->emacp;
-	unsigned long emac_ier;
-
-	emac_ier = EMAC_ISR_PP | EMAC_ISR_BP | EMAC_ISR_RP |
-	    EMAC_ISR_SE | EMAC_ISR_PTLE | EMAC_ISR_ALE |
-	    EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE;
+	struct ocp_enet_private *dev = param;
+	return !(dev->rx_desc[dev->rx_slot].ctrl & MAL_RX_CTRL_EMPTY);
+}
 
-	out_be32(&emacp->em0iser, emac_ier);
+/* BHs disabled */
+static int emac_peek_rx_sg(void *param)
+{
+	struct ocp_enet_private *dev = param;
+	int slot = dev->rx_slot;
+	while (1) {
+		u16 ctrl = dev->rx_desc[slot].ctrl;
+		if (ctrl & MAL_RX_CTRL_EMPTY)
+			return 0;
+		else if (ctrl & MAL_RX_CTRL_LAST)
+			return 1;
 
-	/* enable all MAL transmit and receive channels */
-	mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
-	mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
+		slot = (slot + 1) % NUM_RX_BUFF;
 
-	/* set transmit and receive enable */
-	out_be32(&emacp->em0mr0, EMAC_M0_TXE | EMAC_M0_RXE);
+		/* I'm just being paranoid here :) */
+		if (unlikely(slot == dev->rx_slot))
+			return 0;
+	}
 }
 
-static void
-emac_start_link(struct ocp_enet_private *fep, struct ethtool_cmd *ep)
+/* Hard IRQ */
+static void emac_rxde(void *param)
 {
-	u32 advertise;
-	int autoneg;
-	int forced_speed;
-	int forced_duplex;
+	struct ocp_enet_private *dev = param;
+	++dev->estats.rx_stopped;
+	emac_rx_disable_async(dev);
+}
 
-	/* Default advertise */
-	advertise = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
-	    ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
-	    ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full;
-	autoneg = fep->want_autoneg;
-	forced_speed = fep->phy_mii.speed;
-	forced_duplex = fep->phy_mii.duplex;
+/* Hard IRQ */
+static irqreturn_t emac_irq(int irq, void *dev_instance, struct pt_regs *regs)
+{
+	struct ocp_enet_private *dev = dev_instance;
+	struct emac_regs *p = dev->emacp;
+	struct ibm_emac_error_stats *st = &dev->estats;
+
+	u32 isr = in_be32(&p->isr);
+	out_be32(&p->isr, isr);
+
+	DBG("%d: isr = %08x" NL, dev->def->index, isr);
+
+	if (isr & EMAC_ISR_TXPE)
+		++st->tx_parity;
+	if (isr & EMAC_ISR_RXPE)
+		++st->rx_parity;
+	if (isr & EMAC_ISR_TXUE)
+		++st->tx_underrun;
+	if (isr & EMAC_ISR_RXOE)
+		++st->rx_fifo_overrun;
+	if (isr & EMAC_ISR_OVR)
+		++st->rx_overrun;
+	if (isr & EMAC_ISR_BP)
+		++st->rx_bad_packet;
+	if (isr & EMAC_ISR_RP)
+		++st->rx_runt_packet;
+	if (isr & EMAC_ISR_SE)
+		++st->rx_short_event;
+	if (isr & EMAC_ISR_ALE)
+		++st->rx_alignment_error;
+	if (isr & EMAC_ISR_BFCS)
+		++st->rx_bad_fcs;
+	if (isr & EMAC_ISR_PTLE)
+		++st->rx_packet_too_long;
+	if (isr & EMAC_ISR_ORE)
+		++st->rx_out_of_range;
+	if (isr & EMAC_ISR_IRE)
+		++st->rx_in_range;
+	if (isr & EMAC_ISR_SQE)
+		++st->tx_sqe;
+	if (isr & EMAC_ISR_TE)
+		++st->tx_errors;
 
-	/* Setup link parameters */
-	if (ep) {
-		if (ep->autoneg == AUTONEG_ENABLE) {
-			advertise = ep->advertising;
-			autoneg = 1;
-		} else {
-			autoneg = 0;
-			forced_speed = ep->speed;
-			forced_duplex = ep->duplex;
-		}
-	}
+	return IRQ_HANDLED;
+}
 
-	/* Configure PHY & start aneg */
-	fep->want_autoneg = autoneg;
-	if (autoneg) {
-		LINK_DEBUG(("%s: start link aneg, advertise: 0x%x\n",
-			    fep->ndev->name, advertise));
-		fep->phy_mii.def->ops->setup_aneg(&fep->phy_mii, advertise);
-	} else {
-		LINK_DEBUG(("%s: start link forced, speed: %d, duplex: %d\n",
-			    fep->ndev->name, forced_speed, forced_duplex));
-		fep->phy_mii.def->ops->setup_forced(&fep->phy_mii, forced_speed,
-						    forced_duplex);
-	}
-	fep->timer_ticks = 0;
-	mod_timer(&fep->link_timer, jiffies + HZ);
+static struct net_device_stats *emac_stats(struct net_device *ndev)
+{
+	struct ocp_enet_private *dev = ndev->priv;
+	struct ibm_emac_stats *st = &dev->stats;
+	struct ibm_emac_error_stats *est = &dev->estats;
+	struct net_device_stats *nst = &dev->nstats;
+
+	DBG2("%d: stats" NL, dev->def->index);
+
+	/* Compute "legacy" statistics */
+	local_irq_disable();
+	nst->rx_packets = (unsigned long)st->rx_packets;
+	nst->rx_bytes = (unsigned long)st->rx_bytes;
+	nst->tx_packets = (unsigned long)st->tx_packets;
+	nst->tx_bytes = (unsigned long)st->tx_bytes;
+	nst->rx_dropped = (unsigned long)(est->rx_dropped_oom +
+					  est->rx_dropped_error +
+					  est->rx_dropped_resize +
+					  est->rx_dropped_mtu);
+	nst->tx_dropped = (unsigned long)est->tx_dropped;
+
+	nst->rx_errors = (unsigned long)est->rx_bd_errors;
+	nst->rx_fifo_errors = (unsigned long)(est->rx_bd_overrun +
+					      est->rx_fifo_overrun +
+					      est->rx_overrun);
+	nst->rx_frame_errors = (unsigned long)(est->rx_bd_alignment_error +
+					       est->rx_alignment_error);
+	nst->rx_crc_errors = (unsigned long)(est->rx_bd_bad_fcs +
+					     est->rx_bad_fcs);
+	nst->rx_length_errors = (unsigned long)(est->rx_bd_runt_packet +
+						est->rx_bd_short_event +
+						est->rx_bd_packet_too_long +
+						est->rx_bd_out_of_range +
+						est->rx_bd_in_range +
+						est->rx_runt_packet +
+						est->rx_short_event +
+						est->rx_packet_too_long +
+						est->rx_out_of_range +
+						est->rx_in_range);
+
+	nst->tx_errors = (unsigned long)(est->tx_bd_errors + est->tx_errors);
+	nst->tx_fifo_errors = (unsigned long)(est->tx_bd_underrun +
+					      est->tx_underrun);
+	nst->tx_carrier_errors = (unsigned long)est->tx_bd_carrier_loss;
+	nst->collisions = (unsigned long)(est->tx_bd_excessive_deferral +
+					  est->tx_bd_excessive_collisions +
+					  est->tx_bd_late_collision +
+					  est->tx_bd_multple_collisions);
+	local_irq_enable();
+	return nst;
 }
 
-static void emac_link_timer(unsigned long data)
+static void emac_remove(struct ocp_device *ocpdev)
 {
-	struct ocp_enet_private *fep = (struct ocp_enet_private *)data;
-	int link;
+	struct ocp_enet_private *dev = ocp_get_drvdata(ocpdev);
 
-	if (fep->going_away)
-		return;
+	DBG("%d: remove" NL, dev->def->index);
 
-	spin_lock_irq(&fep->lock);
+	ocp_set_drvdata(ocpdev, 0);
+	unregister_netdev(dev->ndev);
 
-	link = fep->phy_mii.def->ops->poll_link(&fep->phy_mii);
-	LINK_DEBUG(("%s: poll_link: %d\n", fep->ndev->name, link));
+	tah_fini(dev->tah_dev);
+	rgmii_fini(dev->rgmii_dev, dev->rgmii_input);
+	zmii_fini(dev->zmii_dev, dev->zmii_input);
 
-	if (link == netif_carrier_ok(fep->ndev)) {
-		if (!link && fep->want_autoneg && (++fep->timer_ticks) > 10)
-			emac_start_link(fep, NULL);
-		goto out;
-	}
-	printk(KERN_INFO "%s: Link is %s\n", fep->ndev->name,
-	       link ? "Up" : "Down");
-	if (link) {
-		netif_carrier_on(fep->ndev);
-		/* Chip needs a full reset on config change. That sucks, so I
-		 * should ultimately move that to some tasklet to limit
-		 * latency peaks caused by this code
-		 */
-		emac_reset_configure(fep);
-		if (fep->opened)
-			emac_kick(fep);
-	} else {
-		fep->timer_ticks = 0;
-		netif_carrier_off(fep->ndev);
-	}
-      out:
-	mod_timer(&fep->link_timer, jiffies + HZ);
-	spin_unlock_irq(&fep->lock);
+	emac_dbg_register(dev->def->index, 0);
+
+	mal_unregister_commac(dev->mal, &dev->commac);
+	iounmap((void *)dev->emacp);
+	kfree(dev->ndev);
 }
 
-static void emac_set_multicast_list(struct net_device *dev)
-{
-	struct ocp_enet_private *fep = dev->priv;
+static struct mal_commac_ops emac_commac_ops = {
+	.poll_tx = &emac_poll_tx,
+	.poll_rx = &emac_poll_rx,
+	.peek_rx = &emac_peek_rx,
+	.rxde = &emac_rxde,
+};
 
-	spin_lock_irq(&fep->lock);
-	__emac_set_multicast_list(dev);
-	spin_unlock_irq(&fep->lock);
-}
+static struct mal_commac_ops emac_commac_sg_ops = {
+	.poll_tx = &emac_poll_tx,
+	.poll_rx = &emac_poll_rx,
+	.peek_rx = &emac_peek_rx_sg,
+	.rxde = &emac_rxde,
+};
 
-static int emac_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
+/* Ethtool support */
+static int emac_ethtool_get_settings(struct net_device *ndev,
+				     struct ethtool_cmd *cmd)
 {
-	struct ocp_enet_private *fep = ndev->priv;
+	struct ocp_enet_private *dev = ndev->priv;
 
-	cmd->supported = fep->phy_mii.def->features;
+	cmd->supported = dev->phy.features;
 	cmd->port = PORT_MII;
-	cmd->transceiver = XCVR_EXTERNAL;
-	cmd->phy_address = fep->mii_phy_addr;
-	spin_lock_irq(&fep->lock);
-	cmd->autoneg = fep->want_autoneg;
-	cmd->speed = fep->phy_mii.speed;
-	cmd->duplex = fep->phy_mii.duplex;
-	spin_unlock_irq(&fep->lock);
+	cmd->phy_address = dev->phy.address;
+	cmd->transceiver =
+	    dev->phy.address >= 0 ? XCVR_EXTERNAL : XCVR_INTERNAL;
+
+	local_bh_disable();
+	cmd->advertising = dev->phy.advertising;
+	cmd->autoneg = dev->phy.autoneg;
+	cmd->speed = dev->phy.speed;
+	cmd->duplex = dev->phy.duplex;
+	local_bh_enable();
+
 	return 0;
 }
 
-static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
+static int emac_ethtool_set_settings(struct net_device *ndev,
+				     struct ethtool_cmd *cmd)
 {
-	struct ocp_enet_private *fep = ndev->priv;
-	unsigned long features = fep->phy_mii.def->features;
+	struct ocp_enet_private *dev = ndev->priv;
+	u32 f = dev->phy.features;
 
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
+	DBG("%d: set_settings(%d, %d, %d, 0x%08x)" NL, dev->def->index,
+	    cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising);
 
+	/* Basic sanity checks */
+	if (dev->phy.address < 0)
+		return -EOPNOTSUPP;
 	if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
 		return -EINVAL;
 	if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
 		return -EINVAL;
 	if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL)
 		return -EINVAL;
-	if (cmd->autoneg == AUTONEG_DISABLE)
+
+	if (cmd->autoneg == AUTONEG_DISABLE) {
 		switch (cmd->speed) {
 		case SPEED_10:
-			if (cmd->duplex == DUPLEX_HALF &&
-			    (features & SUPPORTED_10baseT_Half) == 0)
+			if (cmd->duplex == DUPLEX_HALF
+			    && !(f & SUPPORTED_10baseT_Half))
 				return -EINVAL;
-			if (cmd->duplex == DUPLEX_FULL &&
-			    (features & SUPPORTED_10baseT_Full) == 0)
+			if (cmd->duplex == DUPLEX_FULL
+			    && !(f & SUPPORTED_10baseT_Full))
 				return -EINVAL;
 			break;
 		case SPEED_100:
-			if (cmd->duplex == DUPLEX_HALF &&
-			    (features & SUPPORTED_100baseT_Half) == 0)
+			if (cmd->duplex == DUPLEX_HALF
+			    && !(f & SUPPORTED_100baseT_Half))
 				return -EINVAL;
-			if (cmd->duplex == DUPLEX_FULL &&
-			    (features & SUPPORTED_100baseT_Full) == 0)
+			if (cmd->duplex == DUPLEX_FULL
+			    && !(f & SUPPORTED_100baseT_Full))
 				return -EINVAL;
 			break;
 		case SPEED_1000:
-			if (cmd->duplex == DUPLEX_HALF &&
-			    (features & SUPPORTED_1000baseT_Half) == 0)
+			if (cmd->duplex == DUPLEX_HALF
+			    && !(f & SUPPORTED_1000baseT_Half))
 				return -EINVAL;
-			if (cmd->duplex == DUPLEX_FULL &&
-			    (features & SUPPORTED_1000baseT_Full) == 0)
+			if (cmd->duplex == DUPLEX_FULL
+			    && !(f & SUPPORTED_1000baseT_Full))
 				return -EINVAL;
 			break;
 		default:
 			return -EINVAL;
-	} else if ((features & SUPPORTED_Autoneg) == 0)
-		return -EINVAL;
-	spin_lock_irq(&fep->lock);
-	emac_start_link(fep, cmd);
-	spin_unlock_irq(&fep->lock);
+		}
+
+		local_bh_disable();
+		dev->phy.def->ops->setup_forced(&dev->phy, cmd->speed,
+						cmd->duplex);
+
+	} else {
+		if (!(f & SUPPORTED_Autoneg))
+			return -EINVAL;
+
+		local_bh_disable();
+		dev->phy.def->ops->setup_aneg(&dev->phy,
+					      (cmd->advertising & f) |
+					      (dev->phy.advertising &
+					       (ADVERTISED_Pause |
+						ADVERTISED_Asym_Pause)));
+	}
+	emac_force_link_update(dev);
+	local_bh_enable();
+
 	return 0;
 }
 
-static void
-emac_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info)
+static void emac_ethtool_get_ringparam(struct net_device *ndev,
+				       struct ethtool_ringparam *rp)
 {
-	struct ocp_enet_private *fep = ndev->priv;
-
-	strcpy(info->driver, DRV_NAME);
-	strcpy(info->version, DRV_VERSION);
-	info->fw_version[0] = '\0';
-	sprintf(info->bus_info, "IBM EMAC %d", fep->ocpdev->def->index);
-	info->regdump_len = 0;
+	rp->rx_max_pending = rp->rx_pending = NUM_RX_BUFF;
+	rp->tx_max_pending = rp->tx_pending = NUM_TX_BUFF;
 }
 
-static int emac_nway_reset(struct net_device *ndev)
+static void emac_ethtool_get_pauseparam(struct net_device *ndev,
+					struct ethtool_pauseparam *pp)
 {
-	struct ocp_enet_private *fep = ndev->priv;
+	struct ocp_enet_private *dev = ndev->priv;
+
+	local_bh_disable();
+	if ((dev->phy.features & SUPPORTED_Autoneg) &&
+	    (dev->phy.advertising & (ADVERTISED_Pause | ADVERTISED_Asym_Pause)))
+		pp->autoneg = 1;
+
+	if (dev->phy.duplex == DUPLEX_FULL) {
+		if (dev->phy.pause)
+			pp->rx_pause = pp->tx_pause = 1;
+		else if (dev->phy.asym_pause)
+			pp->tx_pause = 1;
+	}
+	local_bh_enable();
+}
 
-	if (!fep->want_autoneg)
-		return -EINVAL;
-	spin_lock_irq(&fep->lock);
-	emac_start_link(fep, NULL);
-	spin_unlock_irq(&fep->lock);
-	return 0;
+static u32 emac_ethtool_get_rx_csum(struct net_device *ndev)
+{
+	struct ocp_enet_private *dev = ndev->priv;
+	return dev->tah_dev != 0;
 }
 
-static u32 emac_get_link(struct net_device *ndev)
+static int emac_get_regs_len(struct ocp_enet_private *dev)
 {
-	return netif_carrier_ok(ndev);
+	return sizeof(struct emac_ethtool_regs_subhdr) + EMAC_ETHTOOL_REGS_SIZE;
 }
 
-static struct ethtool_ops emac_ethtool_ops = {
-	.get_settings = emac_get_settings,
-	.set_settings = emac_set_settings,
-	.get_drvinfo = emac_get_drvinfo,
-	.nway_reset = emac_nway_reset,
-	.get_link = emac_get_link
-};
+static int emac_ethtool_get_regs_len(struct net_device *ndev)
+{
+	struct ocp_enet_private *dev = ndev->priv;
+	return sizeof(struct emac_ethtool_regs_hdr) +
+	    emac_get_regs_len(dev) + mal_get_regs_len(dev->mal) +
+	    zmii_get_regs_len(dev->zmii_dev) +
+	    rgmii_get_regs_len(dev->rgmii_dev) +
+	    tah_get_regs_len(dev->tah_dev);
+}
 
-static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+static void *emac_dump_regs(struct ocp_enet_private *dev, void *buf)
 {
-	struct ocp_enet_private *fep = dev->priv;
-	uint16_t *data = (uint16_t *) & rq->ifr_ifru;
+	struct emac_ethtool_regs_subhdr *hdr = buf;
 
-	switch (cmd) {
-	case SIOCGMIIPHY:
-		data[0] = fep->mii_phy_addr;
-		/* Fall through */
-	case SIOCGMIIREG:
-		data[3] = emac_phy_read(dev, fep->mii_phy_addr, data[1]);
-		return 0;
-	case SIOCSMIIREG:
-		if (!capable(CAP_NET_ADMIN))
-			return -EPERM;
+	hdr->version = EMAC_ETHTOOL_REGS_VER;
+	hdr->index = dev->def->index;
+	memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE);
+	return ((void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE);
+}
 
-		emac_phy_write(dev, fep->mii_phy_addr, data[1], data[2]);
-		return 0;
-	default:
-		return -EOPNOTSUPP;
+static void emac_ethtool_get_regs(struct net_device *ndev,
+				  struct ethtool_regs *regs, void *buf)
+{
+	struct ocp_enet_private *dev = ndev->priv;
+	struct emac_ethtool_regs_hdr *hdr = buf;
+
+	hdr->components = 0;
+	buf = hdr + 1;
+
+	local_irq_disable();
+	buf = mal_dump_regs(dev->mal, buf);
+	buf = emac_dump_regs(dev, buf);
+	if (dev->zmii_dev) {
+		hdr->components |= EMAC_ETHTOOL_REGS_ZMII;
+		buf = zmii_dump_regs(dev->zmii_dev, buf);
 	}
+	if (dev->rgmii_dev) {
+		hdr->components |= EMAC_ETHTOOL_REGS_RGMII;
+		buf = rgmii_dump_regs(dev->rgmii_dev, buf);
+	}
+	if (dev->tah_dev) {
+		hdr->components |= EMAC_ETHTOOL_REGS_TAH;
+		buf = tah_dump_regs(dev->tah_dev, buf);
+	}
+	local_irq_enable();
 }
 
-static int emac_open(struct net_device *dev)
+static int emac_ethtool_nway_reset(struct net_device *ndev)
 {
-	struct ocp_enet_private *fep = dev->priv;
-	int rc;
+	struct ocp_enet_private *dev = ndev->priv;
+	int res = 0;
 
-	spin_lock_irq(&fep->lock);
+	DBG("%d: nway_reset" NL, dev->def->index);
 
-	fep->opened = 1;
-	netif_carrier_off(dev);
+	if (dev->phy.address < 0)
+		return -EOPNOTSUPP;
 
-	/* Reset & configure the chip */
-	emac_reset_configure(fep);
+	local_bh_disable();
+	if (!dev->phy.autoneg) {
+		res = -EINVAL;
+		goto out;
+	}
 
-	spin_unlock_irq(&fep->lock);
+	dev->phy.def->ops->setup_aneg(&dev->phy, dev->phy.advertising);
+	emac_force_link_update(dev);
 
-	/* Request our interrupt lines */
-	rc = request_irq(dev->irq, emac_mac_irq, 0, "IBM EMAC MAC", dev);
-	if (rc != 0) {
-		printk("dev->irq %d failed\n", dev->irq);
-		goto bail;
-	}
-	/* Kick the chip rx & tx channels into life */
-	spin_lock_irq(&fep->lock);
-	emac_kick(fep);
-	spin_unlock_irq(&fep->lock);
+      out:
+	local_bh_enable();
+	return res;
+}
 
-	netif_start_queue(dev);
-      bail:
-	return rc;
+static int emac_ethtool_get_stats_count(struct net_device *ndev)
+{
+	return EMAC_ETHTOOL_STATS_COUNT;
 }
 
-static int emac_close(struct net_device *dev)
+static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset,
+				     u8 * buf)
 {
-	struct ocp_enet_private *fep = dev->priv;
-	emac_t *emacp = fep->emacp;
+	if (stringset == ETH_SS_STATS)
+		memcpy(buf, &emac_stats_keys, sizeof(emac_stats_keys));
+}
 
-	/* XXX Stop IRQ emitting here */
-	spin_lock_irq(&fep->lock);
-	fep->opened = 0;
-	mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
-	mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
-	netif_carrier_off(dev);
-	netif_stop_queue(dev);
+static void emac_ethtool_get_ethtool_stats(struct net_device *ndev,
+					   struct ethtool_stats *estats,
+					   u64 * tmp_stats)
+{
+	struct ocp_enet_private *dev = ndev->priv;
+	local_irq_disable();
+	memcpy(tmp_stats, &dev->stats, sizeof(dev->stats));
+	tmp_stats += sizeof(dev->stats) / sizeof(u64);
+	memcpy(tmp_stats, &dev->estats, sizeof(dev->estats));
+	local_irq_enable();
+}
 
-	/*
-	 * Check for a link, some PHYs don't provide a clock if
-	 * no link is present.  Some EMACs will not come out of
-	 * soft reset without a PHY clock present.
-	 */
-	if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) {
-		out_be32(&emacp->em0mr0, EMAC_M0_SRST);
-		udelay(10);
+static void emac_ethtool_get_drvinfo(struct net_device *ndev,
+				     struct ethtool_drvinfo *info)
+{
+	struct ocp_enet_private *dev = ndev->priv;
 
-		if (emacp->em0mr0 & EMAC_M0_SRST) {
-			/*not sure what to do here hopefully it clears before another open */
-			printk(KERN_ERR
-			       "%s: Phy SoftReset didn't clear, no link?\n",
-			       dev->name);
-		}
-	}
+	strcpy(info->driver, "ibm_emac");
+	strcpy(info->version, DRV_VERSION);
+	info->fw_version[0] = '\0';
+	sprintf(info->bus_info, "PPC 4xx EMAC %d", dev->def->index);
+	info->n_stats = emac_ethtool_get_stats_count(ndev);
+	info->regdump_len = emac_ethtool_get_regs_len(ndev);
+}
 
-	/* Free the irq's */
-	free_irq(dev->irq, dev);
+static struct ethtool_ops emac_ethtool_ops = {
+	.get_settings = emac_ethtool_get_settings,
+	.set_settings = emac_ethtool_set_settings,
+	.get_drvinfo = emac_ethtool_get_drvinfo,
 
-	spin_unlock_irq(&fep->lock);
+	.get_regs_len = emac_ethtool_get_regs_len,
+	.get_regs = emac_ethtool_get_regs,
 
-	return 0;
-}
+	.nway_reset = emac_ethtool_nway_reset,
 
-static void emac_remove(struct ocp_device *ocpdev)
-{
-	struct net_device *dev = ocp_get_drvdata(ocpdev);
-	struct ocp_enet_private *ep = dev->priv;
-
-	/* FIXME: locking, races, ... */
-	ep->going_away = 1;
-	ocp_set_drvdata(ocpdev, NULL);
-	if (ep->rgmii_dev)
-		emac_close_rgmii(ep->rgmii_dev);
-	if (ep->zmii_dev)
-		emac_close_zmii(ep->zmii_dev);
-
-	unregister_netdev(dev);
-	del_timer_sync(&ep->link_timer);
-	mal_unregister_commac(ep->mal, &ep->commac);
-	iounmap((void *)ep->emacp);
-	kfree(dev);
-}
-
-struct mal_commac_ops emac_commac_ops = {
-	.txeob = &emac_txeob_dev,
-	.txde = &emac_txde_dev,
-	.rxeob = &emac_rxeob_dev,
-	.rxde = &emac_rxde_dev,
+	.get_ringparam = emac_ethtool_get_ringparam,
+	.get_pauseparam = emac_ethtool_get_pauseparam,
+
+	.get_rx_csum = emac_ethtool_get_rx_csum,
+
+	.get_strings = emac_ethtool_get_strings,
+	.get_stats_count = emac_ethtool_get_stats_count,
+	.get_ethtool_stats = emac_ethtool_get_ethtool_stats,
+
+	.get_link = ethtool_op_get_link,
+	.get_tx_csum = ethtool_op_get_tx_csum,
+	.get_sg = ethtool_op_get_sg,
 };
 
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void emac_netpoll(struct net_device *ndev)
+static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
 {
-	emac_rxeob_dev((void *)ndev, 0);
-	emac_txeob_dev((void *)ndev, 0);
+	struct ocp_enet_private *dev = ndev->priv;
+	uint16_t *data = (uint16_t *) & rq->ifr_ifru;
+
+	DBG("%d: ioctl %08x" NL, dev->def->index, cmd);
+
+	if (dev->phy.address < 0)
+		return -EOPNOTSUPP;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+	case SIOCDEVPRIVATE:
+		data[0] = dev->phy.address;
+		/* Fall through */
+	case SIOCGMIIREG:
+	case SIOCDEVPRIVATE + 1:
+		data[3] = emac_mdio_read(ndev, dev->phy.address, data[1]);
+		return 0;
+
+	case SIOCSMIIREG:
+	case SIOCDEVPRIVATE + 2:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		emac_mdio_write(ndev, dev->phy.address, data[1], data[2]);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
 }
-#endif
 
-static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal)
+static int __init emac_probe(struct ocp_device *ocpdev)
 {
-	int deferred_init = 0;
-	int rc = 0, i;
+	struct ocp_func_emac_data *emacdata = ocpdev->def->additions;
 	struct net_device *ndev;
-	struct ocp_enet_private *ep;
-	struct ocp_func_emac_data *emacdata;
-	int commac_reg = 0;
-	u32 phy_map;
+	struct ocp_device *maldev;
+	struct ocp_enet_private *dev;
+	int err, i;
+
+	DBG("%d: probe" NL, ocpdev->def->index);
 
-	emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions;
 	if (!emacdata) {
 		printk(KERN_ERR "emac%d: Missing additional data!\n",
 		       ocpdev->def->index);
@@ -1738,304 +1936,312 @@ static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal)
 
 	/* Allocate our net_device structure */
 	ndev = alloc_etherdev(sizeof(struct ocp_enet_private));
-	if (ndev == NULL) {
-		printk(KERN_ERR
-		       "emac%d: Could not allocate ethernet device.\n",
+	if (!ndev) {
+		printk(KERN_ERR "emac%d: could not allocate ethernet device!\n",
 		       ocpdev->def->index);
 		return -ENOMEM;
 	}
-	ep = ndev->priv;
-	ep->ndev = ndev;
-	ep->ocpdev = ocpdev;
-	ndev->irq = ocpdev->def->irq;
-	ep->wol_irq = emacdata->wol_irq;
-	if (emacdata->mdio_idx >= 0) {
-		if (emacdata->mdio_idx == ocpdev->def->index) {
-			/* Set the common MDIO net_device */
-			mdio_ndev = ndev;
-			deferred_init = 1;
-		}
-		ep->mdio_dev = mdio_ndev;
-	} else {
-		ep->mdio_dev = ndev;
-	}
+	dev = ndev->priv;
+	dev->ndev = ndev;
+	dev->ldev = &ocpdev->dev;
+	dev->def = ocpdev->def;
+	SET_MODULE_OWNER(ndev);
 
-	ocp_set_drvdata(ocpdev, ndev);
-
-	spin_lock_init(&ep->lock);
-
-	/* Fill out MAL informations and register commac */
-	ep->mal = mal;
-	ep->mal_tx_chan = emacdata->mal_tx_chan;
-	ep->mal_rx_chan = emacdata->mal_rx_chan;
-	ep->commac.ops = &emac_commac_ops;
-	ep->commac.dev = ndev;
-	ep->commac.tx_chan_mask = MAL_CHAN_MASK(ep->mal_tx_chan);
-	ep->commac.rx_chan_mask = MAL_CHAN_MASK(ep->mal_rx_chan);
-	rc = mal_register_commac(ep->mal, &ep->commac);
-	if (rc != 0)
-		goto bail;
-	commac_reg = 1;
-
-	/* Map our MMIOs */
-	ep->emacp = (emac_t *) ioremap(ocpdev->def->paddr, sizeof(emac_t));
-
-	/* Check if we need to attach to a ZMII */
-	if (emacdata->zmii_idx >= 0) {
-		ep->zmii_input = emacdata->zmii_mux;
-		ep->zmii_dev =
-		    ocp_find_device(OCP_ANY_ID, OCP_FUNC_ZMII,
-				    emacdata->zmii_idx);
-		if (ep->zmii_dev == NULL)
-			printk(KERN_WARNING
-			       "emac%d: ZMII %d requested but not found !\n",
-			       ocpdev->def->index, emacdata->zmii_idx);
-		else if ((rc =
-			  emac_init_zmii(ep->zmii_dev, ep->zmii_input,
-					 emacdata->phy_mode)) != 0)
-			goto bail;
+	/* Find MAL device we are connected to */
+	maldev =
+	    ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_MAL, emacdata->mal_idx);
+	if (!maldev) {
+		printk(KERN_ERR "emac%d: unknown mal%d device!\n",
+		       dev->def->index, emacdata->mal_idx);
+		err = -ENODEV;
+		goto out;
+	}
+	dev->mal = ocp_get_drvdata(maldev);
+	if (!dev->mal) {
+		printk(KERN_ERR "emac%d: mal%d hasn't been initialized yet!\n",
+		       dev->def->index, emacdata->mal_idx);
+		err = -ENODEV;
+		goto out;
 	}
 
-	/* Check if we need to attach to a RGMII */
-	if (emacdata->rgmii_idx >= 0) {
-		ep->rgmii_input = emacdata->rgmii_mux;
-		ep->rgmii_dev =
-		    ocp_find_device(OCP_ANY_ID, OCP_FUNC_RGMII,
-				    emacdata->rgmii_idx);
-		if (ep->rgmii_dev == NULL)
-			printk(KERN_WARNING
-			       "emac%d: RGMII %d requested but not found !\n",
-			       ocpdev->def->index, emacdata->rgmii_idx);
-		else if ((rc =
-			  emac_init_rgmii(ep->rgmii_dev, ep->rgmii_input,
-					  emacdata->phy_mode)) != 0)
-			goto bail;
+	/* Register with MAL */
+	dev->commac.ops = &emac_commac_ops;
+	dev->commac.dev = dev;
+	dev->commac.tx_chan_mask = MAL_CHAN_MASK(emacdata->mal_tx_chan);
+	dev->commac.rx_chan_mask = MAL_CHAN_MASK(emacdata->mal_rx_chan);
+	err = mal_register_commac(dev->mal, &dev->commac);
+	if (err) {
+		printk(KERN_ERR "emac%d: failed to register with mal%d!\n",
+		       dev->def->index, emacdata->mal_idx);
+		goto out;
+	}
+	dev->rx_skb_size = emac_rx_skb_size(ndev->mtu);
+	dev->rx_sync_size = emac_rx_sync_size(ndev->mtu);
+
+	/* Get pointers to BD rings */
+	dev->tx_desc =
+	    dev->mal->bd_virt + mal_tx_bd_offset(dev->mal,
+						 emacdata->mal_tx_chan);
+	dev->rx_desc =
+	    dev->mal->bd_virt + mal_rx_bd_offset(dev->mal,
+						 emacdata->mal_rx_chan);
+
+	DBG("%d: tx_desc %p" NL, ocpdev->def->index, dev->tx_desc);
+	DBG("%d: rx_desc %p" NL, ocpdev->def->index, dev->rx_desc);
+
+	/* Clean rings */
+	memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor));
+	memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor));
+
+	/* If we depend on another EMAC for MDIO, check whether it was probed already */
+	if (emacdata->mdio_idx >= 0 && emacdata->mdio_idx != ocpdev->def->index) {
+		struct ocp_device *mdiodev =
+		    ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC,
+				    emacdata->mdio_idx);
+		if (!mdiodev) {
+			printk(KERN_ERR "emac%d: unknown emac%d device!\n",
+			       dev->def->index, emacdata->mdio_idx);
+			err = -ENODEV;
+			goto out2;
+		}
+		dev->mdio_dev = ocp_get_drvdata(mdiodev);
+		if (!dev->mdio_dev) {
+			printk(KERN_ERR
+			       "emac%d: emac%d hasn't been initialized yet!\n",
+			       dev->def->index, emacdata->mdio_idx);
+			err = -ENODEV;
+			goto out2;
+		}
 	}
 
-	/* Check if we need to attach to a TAH */
-	if (emacdata->tah_idx >= 0) {
-		ep->tah_dev =
-		    ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH,
-				    emacdata->tah_idx);
-		if (ep->tah_dev == NULL)
-			printk(KERN_WARNING
-			       "emac%d: TAH %d requested but not found !\n",
-			       ocpdev->def->index, emacdata->tah_idx);
-		else if ((rc = emac_init_tah(ep)) != 0)
-			goto bail;
+	/* Attach to ZMII, if needed */
+	if ((err = zmii_attach(dev)) != 0)
+		goto out2;
+
+	/* Attach to RGMII, if needed */
+	if ((err = rgmii_attach(dev)) != 0)
+		goto out3;
+
+	/* Attach to TAH, if needed */
+	if ((err = tah_attach(dev)) != 0)
+		goto out4;
+
+	/* Map EMAC regs */
+	dev->emacp =
+	    (struct emac_regs *)ioremap(dev->def->paddr,
+					sizeof(struct emac_regs));
+	if (!dev->emacp) {
+		printk(KERN_ERR "emac%d: could not ioremap device registers!\n",
+		       dev->def->index);
+		err = -ENOMEM;
+		goto out5;
 	}
 
-	if (deferred_init) {
-		if (!list_empty(&emac_init_list)) {
-			struct list_head *entry;
-			struct emac_def_dev *ddev;
+	/* Fill in MAC address */
+	for (i = 0; i < 6; ++i)
+		ndev->dev_addr[i] = emacdata->mac_addr[i];
 
-			list_for_each(entry, &emac_init_list) {
-				ddev =
-				    list_entry(entry, struct emac_def_dev,
-					       link);
-				emac_init_device(ddev->ocpdev, ddev->mal);
-			}
+	/* Set some link defaults before we can find out real parameters */
+	dev->phy.speed = SPEED_100;
+	dev->phy.duplex = DUPLEX_FULL;
+	dev->phy.autoneg = AUTONEG_DISABLE;
+	dev->phy.pause = dev->phy.asym_pause = 0;
+	init_timer(&dev->link_timer);
+	dev->link_timer.function = emac_link_timer;
+	dev->link_timer.data = (unsigned long)dev;
+
+	/* Find PHY if any */
+	dev->phy.dev = ndev;
+	dev->phy.mode = emacdata->phy_mode;
+	if (emacdata->phy_map != 0xffffffff) {
+		u32 phy_map = emacdata->phy_map | busy_phy_map;
+		u32 adv;
+
+		DBG("%d: PHY maps %08x %08x" NL, dev->def->index,
+		    emacdata->phy_map, busy_phy_map);
+
+		EMAC_RX_CLK_TX(dev->def->index);
+
+		dev->phy.mdio_read = emac_mdio_read;
+		dev->phy.mdio_write = emac_mdio_write;
+
+		/* Configure EMAC with defaults so we can at least use MDIO
+		 * This is needed mostly for 440GX
+		 */
+		if (emac_phy_gpcs(dev->phy.mode)) {
+			/* XXX
+			 * Make GPCS PHY address equal to EMAC index.
+			 * We probably should take into account busy_phy_map
+			 * and/or phy_map here.
+			 */
+			dev->phy.address = dev->def->index;
 		}
-	}
+		
+		emac_configure(dev);
 
-	/* Init link monitoring timer */
-	init_timer(&ep->link_timer);
-	ep->link_timer.function = emac_link_timer;
-	ep->link_timer.data = (unsigned long)ep;
-	ep->timer_ticks = 0;
-
-	/* Fill up the mii_phy structure */
-	ep->phy_mii.dev = ndev;
-	ep->phy_mii.mdio_read = emac_phy_read;
-	ep->phy_mii.mdio_write = emac_phy_write;
-	ep->phy_mii.mode = emacdata->phy_mode;
-
-	/* Find PHY */
-	phy_map = emacdata->phy_map | busy_phy_map;
-	for (i = 0; i <= 0x1f; i++, phy_map >>= 1) {
-		if ((phy_map & 0x1) == 0) {
-			int val = emac_phy_read(ndev, i, MII_BMCR);
-			if (val != 0xffff && val != -1)
-				break;
+		for (i = 0; i < 0x20; phy_map >>= 1, ++i)
+			if (!(phy_map & 1)) {
+				int r;
+				busy_phy_map |= 1 << i;
+
+				/* Quick check if there is a PHY at the address */
+				r = emac_mdio_read(dev->ndev, i, MII_BMCR);
+				if (r == 0xffff || r < 0)
+					continue;
+				if (!mii_phy_probe(&dev->phy, i))
+					break;
+			}
+		if (i == 0x20) {
+			printk(KERN_WARNING "emac%d: can't find PHY!\n",
+			       dev->def->index);
+			goto out6;
 		}
-	}
-	if (i == 0x20) {
-		printk(KERN_WARNING "emac%d: Can't find PHY.\n",
-		       ocpdev->def->index);
-		rc = -ENODEV;
-		goto bail;
-	}
-	busy_phy_map |= 1 << i;
-	ep->mii_phy_addr = i;
-	rc = mii_phy_probe(&ep->phy_mii, i);
-	if (rc) {
-		printk(KERN_WARNING "emac%d: Failed to probe PHY type.\n",
-		       ocpdev->def->index);
-		rc = -ENODEV;
-		goto bail;
-	}
-	
-	/* Disable any PHY features not supported by the platform */
-	ep->phy_mii.def->features &= ~emacdata->phy_feat_exc;
 
-	/* Setup initial PHY config & startup aneg */
-	if (ep->phy_mii.def->ops->init)
-		ep->phy_mii.def->ops->init(&ep->phy_mii);
-	netif_carrier_off(ndev);
-	if (ep->phy_mii.def->features & SUPPORTED_Autoneg)
-		ep->want_autoneg = 1;
-	else {
-		ep->want_autoneg = 0;
+		/* Init PHY */
+		if (dev->phy.def->ops->init)
+			dev->phy.def->ops->init(&dev->phy);
 		
-		/* Select highest supported speed/duplex */
-		if (ep->phy_mii.def->features & SUPPORTED_1000baseT_Full) {
-			ep->phy_mii.speed = SPEED_1000;
-			ep->phy_mii.duplex = DUPLEX_FULL;
-		} else if (ep->phy_mii.def->features & 
-			   SUPPORTED_1000baseT_Half) {
-			ep->phy_mii.speed = SPEED_1000;
-			ep->phy_mii.duplex = DUPLEX_HALF;
-		} else if (ep->phy_mii.def->features & 
-			   SUPPORTED_100baseT_Full) {
-			ep->phy_mii.speed = SPEED_100;
-			ep->phy_mii.duplex = DUPLEX_FULL;
-		} else if (ep->phy_mii.def->features & 
-			   SUPPORTED_100baseT_Half) {
-			ep->phy_mii.speed = SPEED_100;
-			ep->phy_mii.duplex = DUPLEX_HALF;
-		} else if (ep->phy_mii.def->features & 
-			   SUPPORTED_10baseT_Full) {
-			ep->phy_mii.speed = SPEED_10;
-			ep->phy_mii.duplex = DUPLEX_FULL;
+		/* Disable any PHY features not supported by the platform */
+		dev->phy.def->features &= ~emacdata->phy_feat_exc;
+
+		/* Setup initial link parameters */
+		if (dev->phy.features & SUPPORTED_Autoneg) {
+			adv = dev->phy.features;
+#if !defined(CONFIG_40x)
+			adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
+#endif
+			/* Restart autonegotiation */
+			dev->phy.def->ops->setup_aneg(&dev->phy, adv);
 		} else {
-			ep->phy_mii.speed = SPEED_10;
-			ep->phy_mii.duplex = DUPLEX_HALF;
+			u32 f = dev->phy.def->features;
+			int speed = SPEED_10, fd = DUPLEX_HALF;
+
+			/* Select highest supported speed/duplex */
+			if (f & SUPPORTED_1000baseT_Full) {
+				speed = SPEED_1000;
+				fd = DUPLEX_FULL;
+			} else if (f & SUPPORTED_1000baseT_Half)
+				speed = SPEED_1000;
+			else if (f & SUPPORTED_100baseT_Full) {
+				speed = SPEED_100;
+				fd = DUPLEX_FULL;
+			} else if (f & SUPPORTED_100baseT_Half)
+				speed = SPEED_100;
+			else if (f & SUPPORTED_10baseT_Full)
+				fd = DUPLEX_FULL;
+
+			/* Force link parameters */
+			dev->phy.def->ops->setup_forced(&dev->phy, speed, fd);
 		}
-	}
-	emac_start_link(ep, NULL);
+	} else {
+		emac_reset(dev);
 
-	/* read the MAC Address */
-	for (i = 0; i < 6; i++)
-		ndev->dev_addr[i] = emacdata->mac_addr[i];
+		/* PHY-less configuration.
+		 * XXX I probably should move these settings to emacdata
+		 */
+		dev->phy.address = -1;
+		dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII;
+		dev->phy.pause = 1;
+	}
 
 	/* Fill in the driver function table */
 	ndev->open = &emac_open;
-	ndev->hard_start_xmit = &emac_start_xmit;
+	if (dev->tah_dev) {
+		ndev->hard_start_xmit = &emac_start_xmit_sg;
+		ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+	} else
+		ndev->hard_start_xmit = &emac_start_xmit;
+	ndev->tx_timeout = &emac_full_tx_reset;
+	ndev->watchdog_timeo = 5 * HZ;
 	ndev->stop = &emac_close;
 	ndev->get_stats = &emac_stats;
-	if (emacdata->jumbo)
-		ndev->change_mtu = &emac_change_mtu;
-	ndev->set_mac_address = &emac_set_mac_address;
 	ndev->set_multicast_list = &emac_set_multicast_list;
 	ndev->do_ioctl = &emac_ioctl;
+	if (emac_phy_supports_gige(emacdata->phy_mode)) {
+		ndev->change_mtu = &emac_change_mtu;
+		dev->commac.ops = &emac_commac_sg_ops;
+	}
 	SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops);
-	if (emacdata->tah_idx >= 0)
-		ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	ndev->poll_controller = emac_netpoll;
-#endif
 
-	SET_MODULE_OWNER(ndev);
+	netif_carrier_off(ndev);
+	netif_stop_queue(ndev);
+
+	err = register_netdev(ndev);
+	if (err) {
+		printk(KERN_ERR "emac%d: failed to register net device (%d)!\n",
+		       dev->def->index, err);
+		goto out6;
+	}
 
-	rc = register_netdev(ndev);
-	if (rc != 0)
-		goto bail;
+	ocp_set_drvdata(ocpdev, dev);
 
-	printk("%s: IBM emac, MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
-	       ndev->name,
+	printk("%s: emac%d, MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+	       ndev->name, dev->def->index,
 	       ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2],
 	       ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]);
-	printk(KERN_INFO "%s: Found %s PHY (0x%02x)\n",
-	       ndev->name, ep->phy_mii.def->name, ep->mii_phy_addr);
 
-      bail:
-	if (rc && commac_reg)
-		mal_unregister_commac(ep->mal, &ep->commac);
-	if (rc && ndev)
-		kfree(ndev);
+	if (dev->phy.address >= 0)
+		printk("%s: found %s PHY (0x%02x)\n", ndev->name,
+		       dev->phy.def->name, dev->phy.address);
 
-	return rc;
-}
-
-static int emac_probe(struct ocp_device *ocpdev)
-{
-	struct ocp_device *maldev;
-	struct ibm_ocp_mal *mal;
-	struct ocp_func_emac_data *emacdata;
-
-	emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions;
-	if (emacdata == NULL) {
-		printk(KERN_ERR "emac%d: Missing additional datas !\n",
-		       ocpdev->def->index);
-		return -ENODEV;
-	}
-
-	/* Get the MAL device  */
-	maldev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_MAL, emacdata->mal_idx);
-	if (maldev == NULL) {
-		printk("No maldev\n");
-		return -ENODEV;
-	}
-	/*
-	 * Get MAL driver data, it must be here due to link order.
-	 * When the driver is modularized, symbol dependencies will
-	 * ensure the MAL driver is already present if built as a
-	 * module.
-	 */
-	mal = (struct ibm_ocp_mal *)ocp_get_drvdata(maldev);
-	if (mal == NULL) {
-		printk("No maldrv\n");
-		return -ENODEV;
-	}
-
-	/* If we depend on another EMAC for MDIO, wait for it to show up */
-	if (emacdata->mdio_idx >= 0 &&
-	    (emacdata->mdio_idx != ocpdev->def->index) && !mdio_ndev) {
-		struct emac_def_dev *ddev;
-		/* Add this index to the deferred init table */
-		ddev = kmalloc(sizeof(struct emac_def_dev), GFP_KERNEL);
-		ddev->ocpdev = ocpdev;
-		ddev->mal = mal;
-		list_add_tail(&ddev->link, &emac_init_list);
-	} else {
-		emac_init_device(ocpdev, mal);
-	}
+	emac_dbg_register(dev->def->index, dev);
 
 	return 0;
+      out6:
+	iounmap((void *)dev->emacp);
+      out5:
+	tah_fini(dev->tah_dev);
+      out4:
+	rgmii_fini(dev->rgmii_dev, dev->rgmii_input);
+      out3:
+	zmii_fini(dev->zmii_dev, dev->zmii_input);
+      out2:
+	mal_unregister_commac(dev->mal, &dev->commac);
+      out:
+	kfree(ndev);
+	return err;
 }
 
-/* Structure for a device driver */
 static struct ocp_device_id emac_ids[] = {
-	{.vendor = OCP_ANY_ID,.function = OCP_FUNC_EMAC},
-	{.vendor = OCP_VENDOR_INVALID}
+	{ .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_EMAC },
+	{ .vendor = OCP_VENDOR_INVALID}
 };
 
 static struct ocp_driver emac_driver = {
 	.name = "emac",
 	.id_table = emac_ids,
-
 	.probe = emac_probe,
 	.remove = emac_remove,
 };
 
 static int __init emac_init(void)
 {
-	printk(KERN_INFO DRV_NAME ": " DRV_DESC ", version " DRV_VERSION "\n");
-	printk(KERN_INFO "Maintained by " DRV_AUTHOR "\n");
+	printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n");
+
+	DBG(": init" NL);
 
-	if (skb_res > 2) {
-		printk(KERN_WARNING "Invalid skb_res: %d, cropping to 2\n",
-		       skb_res);
-		skb_res = 2;
+	if (mal_init())
+		return -ENODEV;
+
+	EMAC_CLK_INTERNAL;
+	if (ocp_register_driver(&emac_driver)) {
+		EMAC_CLK_EXTERNAL;
+		ocp_unregister_driver(&emac_driver);
+		mal_exit();
+		return -ENODEV;
 	}
+	EMAC_CLK_EXTERNAL;
 
-	return ocp_register_driver(&emac_driver);
+	emac_init_debug();
+	return 0;
 }
 
 static void __exit emac_exit(void)
 {
+	DBG(": exit" NL);
 	ocp_unregister_driver(&emac_driver);
+	mal_exit();
+	emac_fini_debug();
 }
 
 module_init(emac_init);
diff --git a/drivers/net/ibm_emac/ibm_emac_core.h b/drivers/net/ibm_emac/ibm_emac_core.h
index 97e6e1ea8c8..e9b44d030ac 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.h
+++ b/drivers/net/ibm_emac/ibm_emac_core.h
@@ -1,146 +1,221 @@
 /*
- * ibm_emac_core.h
+ * drivers/net/ibm_emac/ibm_emac_core.h
  *
- * Ethernet driver for the built in ethernet on the IBM 405 PowerPC
- * processor.
+ * Driver for PowerPC 4xx on-chip ethernet controller.
  *
- *      Armin Kuster akuster@mvista.com
- *      Sept, 2001
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
  *
- *      Orignial driver
- *         Johnnie Peters
- *         jpeters@mvista.com
- *
- * Copyright 2000 MontaVista Softare Inc.
+ * Based on original work by
+ *      Armin Kuster <akuster@mvista.com>
+ * 	Johnnie Peters <jpeters@mvista.com>
+ *      Copyright 2000, 2001 MontaVista Softare Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
+ *
  */
+#ifndef __IBM_EMAC_CORE_H_
+#define __IBM_EMAC_CORE_H_
 
-#ifndef _IBM_EMAC_CORE_H_
-#define _IBM_EMAC_CORE_H_
-
+#include <linux/config.h>
 #include <linux/netdevice.h>
+#include <linux/dma-mapping.h>
 #include <asm/ocp.h>
-#include <asm/mmu.h>		/* For phys_addr_t */
 
 #include "ibm_emac.h"
 #include "ibm_emac_phy.h"
-#include "ibm_emac_rgmii.h"
 #include "ibm_emac_zmii.h"
+#include "ibm_emac_rgmii.h"
 #include "ibm_emac_mal.h"
 #include "ibm_emac_tah.h"
 
-#ifndef CONFIG_IBM_EMAC_TXB
-#define NUM_TX_BUFF		64
-#define NUM_RX_BUFF		64
-#else
-#define NUM_TX_BUFF		CONFIG_IBM_EMAC_TXB
-#define NUM_RX_BUFF		CONFIG_IBM_EMAC_RXB
-#endif
+#define NUM_TX_BUFF			CONFIG_IBM_EMAC_TXB
+#define NUM_RX_BUFF			CONFIG_IBM_EMAC_RXB
 
-/* This does 16 byte alignment, exactly what we need.
- * The packet length includes FCS, but we don't want to
- * include that when passing upstream as it messes up
- * bridging applications.
- */
-#ifndef CONFIG_IBM_EMAC_SKBRES
-#define SKB_RES 2
-#else
-#define SKB_RES CONFIG_IBM_EMAC_SKBRES
+/* Simple sanity check */
+#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
+#error Invalid number of buffer descriptors (greater than 256)
 #endif
 
-/* Note about alignement. alloc_skb() returns a cache line
- * aligned buffer. However, dev_alloc_skb() will add 16 more
- * bytes and "reserve" them, so our buffer will actually end
- * on a half cache line. What we do is to use directly
- * alloc_skb, allocate 16 more bytes to match the total amount
- * allocated by dev_alloc_skb(), but we don't reserve.
+// XXX
+#define EMAC_MIN_MTU			46
+#define EMAC_MAX_MTU			9000
+
+/* Maximum L2 header length (VLAN tagged, no FCS) */
+#define EMAC_MTU_OVERHEAD		(6 * 2 + 2 + 4)
+
+/* RX BD size for the given MTU */
+static inline int emac_rx_size(int mtu)
+{
+	if (mtu > ETH_DATA_LEN)
+		return MAL_MAX_RX_SIZE;
+	else
+		return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
+}
+
+#define EMAC_DMA_ALIGN(x)		ALIGN((x), dma_get_cache_alignment())
+
+#define EMAC_RX_SKB_HEADROOM		\
+	EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM)
+
+/* Size of RX skb for the given MTU */
+static inline int emac_rx_skb_size(int mtu)
+{
+	int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
+	return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM;
+}
+
+/* RX DMA sync size */
+static inline int emac_rx_sync_size(int mtu)
+{
+	return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2);
+}
+
+/* Driver statistcs is split into two parts to make it more cache friendly:
+ *   - normal statistics (packet count, etc)
+ *   - error statistics
+ *
+ * When statistics is requested by ethtool, these parts are concatenated,
+ * normal one goes first.
+ *
+ * Please, keep these structures in sync with emac_stats_keys.
  */
-#define MAX_NUM_BUF_DESC	255
-#define DESC_BUF_SIZE		4080	/* max 4096-16 */
-#define DESC_BUF_SIZE_REG	(DESC_BUF_SIZE / 16)
-
-/* Transmitter timeout. */
-#define TX_TIMEOUT		(2*HZ)
-
-/* MDIO latency delay */
-#define MDIO_DELAY		250
-
-/* Power managment shift registers */
-#define IBM_CPM_EMMII	0	/* Shift value for MII */
-#define IBM_CPM_EMRX	1	/* Shift value for recv */
-#define IBM_CPM_EMTX	2	/* Shift value for MAC */
-#define IBM_CPM_EMAC(x)	(((x)>>IBM_CPM_EMMII) | ((x)>>IBM_CPM_EMRX) | ((x)>>IBM_CPM_EMTX))
-
-#define ENET_HEADER_SIZE	14
-#define ENET_FCS_SIZE		4
-#define ENET_DEF_MTU_SIZE	1500
-#define ENET_DEF_BUF_SIZE	(ENET_DEF_MTU_SIZE + ENET_HEADER_SIZE + ENET_FCS_SIZE)
-#define EMAC_MIN_FRAME		64
-#define EMAC_MAX_FRAME		9018
-#define EMAC_MIN_MTU		(EMAC_MIN_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE)
-#define EMAC_MAX_MTU		(EMAC_MAX_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE)
-
-#ifdef CONFIG_IBM_EMAC_ERRMSG
-void emac_serr_dump_0(struct net_device *dev);
-void emac_serr_dump_1(struct net_device *dev);
-void emac_err_dump(struct net_device *dev, int em0isr);
-void emac_phy_dump(struct net_device *);
-void emac_desc_dump(struct net_device *);
-void emac_mac_dump(struct net_device *);
-void emac_mal_dump(struct net_device *);
-#else
-#define emac_serr_dump_0(dev) do { } while (0)
-#define emac_serr_dump_1(dev) do { } while (0)
-#define emac_err_dump(dev,x) do { } while (0)
-#define emac_phy_dump(dev) do { } while (0)
-#define emac_desc_dump(dev) do { } while (0)
-#define emac_mac_dump(dev) do { } while (0)
-#define emac_mal_dump(dev) do { } while (0)
-#endif
+
+/* Normal TX/RX Statistics */
+struct ibm_emac_stats {
+	u64 rx_packets;
+	u64 rx_bytes;
+	u64 tx_packets;
+	u64 tx_bytes;
+	u64 rx_packets_csum;
+	u64 tx_packets_csum;
+};
+
+/* Error statistics */
+struct ibm_emac_error_stats {
+	u64 tx_undo;
+
+	/* Software RX Errors */
+	u64 rx_dropped_stack;
+	u64 rx_dropped_oom;
+	u64 rx_dropped_error;
+	u64 rx_dropped_resize;
+	u64 rx_dropped_mtu;
+	u64 rx_stopped;
+	/* BD reported RX errors */
+	u64 rx_bd_errors;
+	u64 rx_bd_overrun;
+	u64 rx_bd_bad_packet;
+	u64 rx_bd_runt_packet;
+	u64 rx_bd_short_event;
+	u64 rx_bd_alignment_error;
+	u64 rx_bd_bad_fcs;
+	u64 rx_bd_packet_too_long;
+	u64 rx_bd_out_of_range;
+	u64 rx_bd_in_range;
+	/* EMAC IRQ reported RX errors */
+	u64 rx_parity;
+	u64 rx_fifo_overrun;
+	u64 rx_overrun;
+	u64 rx_bad_packet;
+	u64 rx_runt_packet;
+	u64 rx_short_event;
+	u64 rx_alignment_error;
+	u64 rx_bad_fcs;
+	u64 rx_packet_too_long;
+	u64 rx_out_of_range;
+	u64 rx_in_range;
+
+	/* Software TX Errors */
+	u64 tx_dropped;
+	/* BD reported TX errors */
+	u64 tx_bd_errors;
+	u64 tx_bd_bad_fcs;
+	u64 tx_bd_carrier_loss;
+	u64 tx_bd_excessive_deferral;
+	u64 tx_bd_excessive_collisions;
+	u64 tx_bd_late_collision;
+	u64 tx_bd_multple_collisions;
+	u64 tx_bd_single_collision;
+	u64 tx_bd_underrun;
+	u64 tx_bd_sqe;
+	/* EMAC IRQ reported TX errors */
+	u64 tx_parity;
+	u64 tx_underrun;
+	u64 tx_sqe;
+	u64 tx_errors;
+};
+
+#define EMAC_ETHTOOL_STATS_COUNT	((sizeof(struct ibm_emac_stats) + \
+					  sizeof(struct ibm_emac_error_stats)) \
+					 / sizeof(u64))
 
 struct ocp_enet_private {
-	struct sk_buff *tx_skb[NUM_TX_BUFF];
-	struct sk_buff *rx_skb[NUM_RX_BUFF];
-	struct mal_descriptor *tx_desc;
-	struct mal_descriptor *rx_desc;
-	struct mal_descriptor *rx_dirty;
-	struct net_device_stats stats;
-	int tx_cnt;
-	int rx_slot;
-	int dirty_rx;
-	int tx_slot;
-	int ack_slot;
-	int rx_buffer_size;
-
-	struct mii_phy phy_mii;
-	int mii_phy_addr;
-	int want_autoneg;
-	int timer_ticks;
-	struct timer_list link_timer;
-	struct net_device *mdio_dev;
-
-	struct ocp_device *rgmii_dev;
-	int rgmii_input;
-
-	struct ocp_device *zmii_dev;
-	int zmii_input;
-
-	struct ibm_ocp_mal *mal;
-	int mal_tx_chan, mal_rx_chan;
-	struct mal_commac commac;
-
-	struct ocp_device *tah_dev;
-
-	int opened;
-	int going_away;
-	int wol_irq;
-	emac_t *emacp;
-	struct ocp_device *ocpdev;
-	struct net_device *ndev;
-	spinlock_t lock;
+	struct net_device		*ndev;		/* 0 */
+	struct emac_regs		*emacp;
+	
+	struct mal_descriptor		*tx_desc;
+	int				tx_cnt;
+	int				tx_slot;
+	int				ack_slot;
+
+	struct mal_descriptor		*rx_desc;
+	int				rx_slot;
+	struct sk_buff			*rx_sg_skb;	/* 1 */
+	int 				rx_skb_size;
+	int				rx_sync_size;
+
+	struct ibm_emac_stats 		stats;
+	struct ocp_device		*tah_dev;
+
+	struct ibm_ocp_mal		*mal;
+	struct mal_commac		commac;
+
+	struct sk_buff			*tx_skb[NUM_TX_BUFF];
+	struct sk_buff			*rx_skb[NUM_RX_BUFF];
+
+	struct ocp_device		*zmii_dev;
+	int				zmii_input;
+	struct ocp_enet_private		*mdio_dev;
+	struct ocp_device		*rgmii_dev;
+	int				rgmii_input;
+
+	struct ocp_def			*def;
+
+	struct mii_phy			phy;
+	struct timer_list		link_timer;
+	int				reset_failed;
+
+	struct ibm_emac_error_stats	estats;
+	struct net_device_stats		nstats;
+
+	struct device*			ldev;
 };
-#endif				/* _IBM_EMAC_CORE_H_ */
+
+/* Ethtool get_regs complex data.
+ * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH 
+ * when available.
+ * 
+ * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr, 
+ * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
+ * Each register component is preceded with emac_ethtool_regs_subhdr.
+ * Order of the optional headers follows their relative bit posititions 
+ * in emac_ethtool_regs_hdr.components
+ */
+#define EMAC_ETHTOOL_REGS_ZMII		0x00000001
+#define EMAC_ETHTOOL_REGS_RGMII		0x00000002
+#define EMAC_ETHTOOL_REGS_TAH		0x00000004
+
+struct emac_ethtool_regs_hdr {
+	u32 components;
+};
+
+struct emac_ethtool_regs_subhdr {
+	u32 version;
+	u32 index;
+};
+
+#endif				/* __IBM_EMAC_CORE_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_debug.c b/drivers/net/ibm_emac/ibm_emac_debug.c
index c8512046cf8..75d3b863904 100644
--- a/drivers/net/ibm_emac/ibm_emac_debug.c
+++ b/drivers/net/ibm_emac/ibm_emac_debug.c
@@ -1,224 +1,213 @@
 /*
- * ibm_ocp_debug.c
+ * drivers/net/ibm_emac/ibm_emac_debug.c
  *
- * This has all the debug routines that where in *_enet.c
+ * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
  *
- *      Armin Kuster akuster@mvista.com
- *      April , 2002
- *
- * Copyright 2002 MontaVista Softare Inc.
+ * Copyright (c) 2004, 2005 Zultys Technologies
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
+ *
  */
-
 #include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
+#include <linux/sysrq.h>
 #include <asm/io.h>
-#include "ibm_ocp_mal.h"
-#include "ibm_ocp_zmii.h"
-#include "ibm_ocp_enet.h"
 
-extern int emac_phy_read(struct net_device *dev, int mii_id, int reg);
+#include "ibm_emac_core.h"
+
+static void emac_desc_dump(int idx, struct ocp_enet_private *p)
+{
+	int i;
+	printk("** EMAC%d TX BDs **\n"
+	       " tx_cnt = %d tx_slot = %d ack_slot = %d\n",
+	       idx, p->tx_cnt, p->tx_slot, p->ack_slot);
+	for (i = 0; i < NUM_TX_BUFF / 2; ++i)
+		printk
+		    ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n",
+		     i, p->tx_desc[i].data_ptr, p->tx_skb[i] ? 'V' : ' ',
+		     p->tx_desc[i].ctrl, p->tx_desc[i].data_len,
+		     NUM_TX_BUFF / 2 + i,
+		     p->tx_desc[NUM_TX_BUFF / 2 + i].data_ptr,
+		     p->tx_skb[NUM_TX_BUFF / 2 + i] ? 'V' : ' ',
+		     p->tx_desc[NUM_TX_BUFF / 2 + i].ctrl,
+		     p->tx_desc[NUM_TX_BUFF / 2 + i].data_len);
+
+	printk("** EMAC%d RX BDs **\n"
+	       " rx_slot = %d rx_stopped = %d rx_skb_size = %d rx_sync_size = %d\n"
+	       " rx_sg_skb = 0x%p\n",
+	       idx, p->rx_slot, p->commac.rx_stopped, p->rx_skb_size,
+	       p->rx_sync_size, p->rx_sg_skb);
+	for (i = 0; i < NUM_RX_BUFF / 2; ++i)
+		printk
+		    ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n",
+		     i, p->rx_desc[i].data_ptr, p->rx_skb[i] ? 'V' : ' ',
+		     p->rx_desc[i].ctrl, p->rx_desc[i].data_len,
+		     NUM_RX_BUFF / 2 + i,
+		     p->rx_desc[NUM_RX_BUFF / 2 + i].data_ptr,
+		     p->rx_skb[NUM_RX_BUFF / 2 + i] ? 'V' : ' ',
+		     p->rx_desc[NUM_RX_BUFF / 2 + i].ctrl,
+		     p->rx_desc[NUM_RX_BUFF / 2 + i].data_len);
+}
+
+static void emac_mac_dump(int idx, struct ocp_enet_private *dev)
+{
+	struct emac_regs *p = dev->emacp;
+
+	printk("** EMAC%d registers **\n"
+	       "MR0 = 0x%08x MR1 = 0x%08x TMR0 = 0x%08x TMR1 = 0x%08x\n"
+	       "RMR = 0x%08x ISR = 0x%08x ISER = 0x%08x\n"
+	       "IAR = %04x%08x VTPID = 0x%04x VTCI = 0x%04x\n"
+	       "IAHT: 0x%04x 0x%04x 0x%04x 0x%04x "
+	       "GAHT: 0x%04x 0x%04x 0x%04x 0x%04x\n"
+	       "LSA = %04x%08x IPGVR = 0x%04x\n"
+	       "STACR = 0x%08x TRTR = 0x%08x RWMR = 0x%08x\n"
+	       "OCTX = 0x%08x OCRX = 0x%08x IPCR = 0x%08x\n",
+	       idx, in_be32(&p->mr0), in_be32(&p->mr1),
+	       in_be32(&p->tmr0), in_be32(&p->tmr1),
+	       in_be32(&p->rmr), in_be32(&p->isr), in_be32(&p->iser),
+	       in_be32(&p->iahr), in_be32(&p->ialr), in_be32(&p->vtpid),
+	       in_be32(&p->vtci),
+	       in_be32(&p->iaht1), in_be32(&p->iaht2), in_be32(&p->iaht3),
+	       in_be32(&p->iaht4),
+	       in_be32(&p->gaht1), in_be32(&p->gaht2), in_be32(&p->gaht3),
+	       in_be32(&p->gaht4),
+	       in_be32(&p->lsah), in_be32(&p->lsal), in_be32(&p->ipgvr),
+	       in_be32(&p->stacr), in_be32(&p->trtr), in_be32(&p->rwmr),
+	       in_be32(&p->octx), in_be32(&p->ocrx), in_be32(&p->ipcr)
+	    );
+
+	emac_desc_dump(idx, dev);
+}
+
+static void emac_mal_dump(struct ibm_ocp_mal *mal)
+{
+	struct ocp_func_mal_data *maldata = mal->def->additions;
+	int i;
+
+	printk("** MAL%d Registers **\n"
+	       "CFG = 0x%08x ESR = 0x%08x IER = 0x%08x\n"
+	       "TX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n"
+	       "RX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n",
+	       mal->def->index,
+	       get_mal_dcrn(mal, MAL_CFG), get_mal_dcrn(mal, MAL_ESR),
+	       get_mal_dcrn(mal, MAL_IER),
+	       get_mal_dcrn(mal, MAL_TXCASR), get_mal_dcrn(mal, MAL_TXCARR),
+	       get_mal_dcrn(mal, MAL_TXEOBISR), get_mal_dcrn(mal, MAL_TXDEIR),
+	       get_mal_dcrn(mal, MAL_RXCASR), get_mal_dcrn(mal, MAL_RXCARR),
+	       get_mal_dcrn(mal, MAL_RXEOBISR), get_mal_dcrn(mal, MAL_RXDEIR)
+	    );
+
+	printk("TX|");
+	for (i = 0; i < maldata->num_tx_chans; ++i) {
+		if (i && !(i % 4))
+			printk("\n   ");
+		printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_TXCTPR(i)));
+	}
+	printk("\nRX|");
+	for (i = 0; i < maldata->num_rx_chans; ++i) {
+		if (i && !(i % 4))
+			printk("\n   ");
+		printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_RXCTPR(i)));
+	}
+	printk("\n   ");
+	for (i = 0; i < maldata->num_rx_chans; ++i) {
+		u32 r = get_mal_dcrn(mal, MAL_RCBS(i));
+		if (i && !(i % 3))
+			printk("\n   ");
+		printk("RCBS%d = 0x%08x (%d) ", i, r, r * 16);
+	}
+	printk("\n");
+}
+
+static struct ocp_enet_private *__emacs[4];
+static struct ibm_ocp_mal *__mals[1];
 
-void emac_phy_dump(struct net_device *dev)
+void emac_dbg_register(int idx, struct ocp_enet_private *dev)
 {
-	struct ocp_enet_private *fep = dev->priv;
-	unsigned long i;
-	uint data;
-
-	printk(KERN_DEBUG " Prepare for Phy dump....\n");
-	for (i = 0; i < 0x1A; i++) {
-		data = emac_phy_read(dev, fep->mii_phy_addr, i);
-		printk(KERN_DEBUG "Phy reg 0x%lx ==> %4x\n", i, data);
-		if (i == 0x07)
-			i = 0x0f;
+	unsigned long flags;
+
+	if (idx >= sizeof(__emacs) / sizeof(__emacs[0])) {
+		printk(KERN_WARNING
+		       "invalid index %d when registering EMAC for debugging\n",
+		       idx);
+		return;
 	}
+
+	local_irq_save(flags);
+	__emacs[idx] = dev;
+	local_irq_restore(flags);
 }
 
-void emac_desc_dump(struct net_device *dev)
+void mal_dbg_register(int idx, struct ibm_ocp_mal *mal)
 {
-	struct ocp_enet_private *fep = dev->priv;
-	int curr_slot;
-
-	printk(KERN_DEBUG
-	       "dumping the receive descriptors:  current slot is %d\n",
-	       fep->rx_slot);
-	for (curr_slot = 0; curr_slot < NUM_RX_BUFF; curr_slot++) {
-		printk(KERN_DEBUG
-		       "Desc %02d: status 0x%04x, length %3d, addr 0x%x\n",
-		       curr_slot, fep->rx_desc[curr_slot].ctrl,
-		       fep->rx_desc[curr_slot].data_len,
-		       (unsigned int)fep->rx_desc[curr_slot].data_ptr);
+	unsigned long flags;
+
+	if (idx >= sizeof(__mals) / sizeof(__mals[0])) {
+		printk(KERN_WARNING
+		       "invalid index %d when registering MAL for debugging\n",
+		       idx);
+		return;
 	}
+
+	local_irq_save(flags);
+	__mals[idx] = mal;
+	local_irq_restore(flags);
 }
 
-void emac_mac_dump(struct net_device *dev)
+void emac_dbg_dump_all(void)
 {
-	struct ocp_enet_private *fep = dev->priv;
-	volatile emac_t *emacp = fep->emacp;
-
-	printk(KERN_DEBUG "EMAC DEBUG ********** \n");
-	printk(KERN_DEBUG "EMAC_M0  ==> 0x%x\n", in_be32(&emacp->em0mr0));
-	printk(KERN_DEBUG "EMAC_M1  ==> 0x%x\n", in_be32(&emacp->em0mr1));
-	printk(KERN_DEBUG "EMAC_TXM0==> 0x%x\n", in_be32(&emacp->em0tmr0));
-	printk(KERN_DEBUG "EMAC_TXM1==> 0x%x\n", in_be32(&emacp->em0tmr1));
-	printk(KERN_DEBUG "EMAC_RXM ==> 0x%x\n", in_be32(&emacp->em0rmr));
-	printk(KERN_DEBUG "EMAC_ISR ==> 0x%x\n", in_be32(&emacp->em0isr));
-	printk(KERN_DEBUG "EMAC_IER ==> 0x%x\n", in_be32(&emacp->em0iser));
-	printk(KERN_DEBUG "EMAC_IAH ==> 0x%x\n", in_be32(&emacp->em0iahr));
-	printk(KERN_DEBUG "EMAC_IAL ==> 0x%x\n", in_be32(&emacp->em0ialr));
-	printk(KERN_DEBUG "EMAC_VLAN_TPID_REG ==> 0x%x\n",
-	       in_be32(&emacp->em0vtpid));
+	unsigned int i;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	for (i = 0; i < sizeof(__mals) / sizeof(__mals[0]); ++i)
+		if (__mals[i])
+			emac_mal_dump(__mals[i]);
+
+	for (i = 0; i < sizeof(__emacs) / sizeof(__emacs[0]); ++i)
+		if (__emacs[i])
+			emac_mac_dump(i, __emacs[i]);
+
+	local_irq_restore(flags);
 }
 
-void emac_mal_dump(struct net_device *dev)
+#if defined(CONFIG_MAGIC_SYSRQ)
+static void emac_sysrq_handler(int key, struct pt_regs *pt_regs,
+			       struct tty_struct *tty)
 {
-	struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal;
-
-	printk(KERN_DEBUG " MAL DEBUG ********** \n");
-	printk(KERN_DEBUG " MCR      ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALCR));
-	printk(KERN_DEBUG " ESR      ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALESR));
-	printk(KERN_DEBUG " IER      ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALIER));
-#ifdef CONFIG_40x
-	printk(KERN_DEBUG " DBR      ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALDBR));
-#endif				/* CONFIG_40x */
-	printk(KERN_DEBUG " TXCASR   ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCASR));
-	printk(KERN_DEBUG " TXCARR   ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCARR));
-	printk(KERN_DEBUG " TXEOBISR ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALTXEOBISR));
-	printk(KERN_DEBUG " TXDEIR   ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALTXDEIR));
-	printk(KERN_DEBUG " RXCASR   ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCASR));
-	printk(KERN_DEBUG " RXCARR   ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCARR));
-	printk(KERN_DEBUG " RXEOBISR ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALRXEOBISR));
-	printk(KERN_DEBUG " RXDEIR   ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALRXDEIR));
-	printk(KERN_DEBUG " TXCTP0R  ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP0R));
-	printk(KERN_DEBUG " TXCTP1R  ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP1R));
-	printk(KERN_DEBUG " TXCTP2R  ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP2R));
-	printk(KERN_DEBUG " TXCTP3R  ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP3R));
-	printk(KERN_DEBUG " RXCTP0R  ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCTP0R));
-	printk(KERN_DEBUG " RXCTP1R  ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCTP1R));
-	printk(KERN_DEBUG " RCBS0    ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALRCBS0));
-	printk(KERN_DEBUG " RCBS1    ==> 0x%x\n",
-	       (unsigned int)get_mal_dcrn(mal, DCRN_MALRCBS1));
+	emac_dbg_dump_all();
 }
 
-void emac_serr_dump_0(struct net_device *dev)
+static struct sysrq_key_op emac_sysrq_op = {
+	.handler = emac_sysrq_handler,
+	.help_msg = "emaC",
+	.action_msg = "Show EMAC(s) status",
+};
+
+int __init emac_init_debug(void)
 {
-	struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal;
-	unsigned long int mal_error, plb_error, plb_addr;
-
-	mal_error = get_mal_dcrn(mal, DCRN_MALESR);
-	printk(KERN_DEBUG "ppc405_eth_serr: %s channel %ld \n",
-	       (mal_error & 0x40000000) ? "Receive" :
-	       "Transmit", (mal_error & 0x3e000000) >> 25);
-	printk(KERN_DEBUG "  -----  latched error  -----\n");
-	if (mal_error & MALESR_DE)
-		printk(KERN_DEBUG "  DE: descriptor error\n");
-	if (mal_error & MALESR_OEN)
-		printk(KERN_DEBUG "  ONE: OPB non-fullword error\n");
-	if (mal_error & MALESR_OTE)
-		printk(KERN_DEBUG "  OTE: OPB timeout error\n");
-	if (mal_error & MALESR_OSE)
-		printk(KERN_DEBUG "  OSE: OPB slave error\n");
-
-	if (mal_error & MALESR_PEIN) {
-		plb_error = mfdcr(DCRN_PLB0_BESR);
-		printk(KERN_DEBUG
-		       "  PEIN: PLB error, PLB0_BESR is 0x%x\n",
-		       (unsigned int)plb_error);
-		plb_addr = mfdcr(DCRN_PLB0_BEAR);
-		printk(KERN_DEBUG
-		       "  PEIN: PLB error, PLB0_BEAR is 0x%x\n",
-		       (unsigned int)plb_addr);
-	}
+	return register_sysrq_key('c', &emac_sysrq_op);
 }
 
-void emac_serr_dump_1(struct net_device *dev)
+void __exit emac_fini_debug(void)
 {
-	struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal;
-	int mal_error = get_mal_dcrn(mal, DCRN_MALESR);
-
-	printk(KERN_DEBUG "  -----  cumulative errors  -----\n");
-	if (mal_error & MALESR_DEI)
-		printk(KERN_DEBUG "  DEI: descriptor error interrupt\n");
-	if (mal_error & MALESR_ONEI)
-		printk(KERN_DEBUG "  OPB non-fullword error interrupt\n");
-	if (mal_error & MALESR_OTEI)
-		printk(KERN_DEBUG "  OTEI: timeout error interrupt\n");
-	if (mal_error & MALESR_OSEI)
-		printk(KERN_DEBUG "  OSEI: slave error interrupt\n");
-	if (mal_error & MALESR_PBEI)
-		printk(KERN_DEBUG "  PBEI: PLB bus error interrupt\n");
+	unregister_sysrq_key('c', &emac_sysrq_op);
 }
 
-void emac_err_dump(struct net_device *dev, int em0isr)
+#else
+int __init emac_init_debug(void)
+{
+	return 0;
+}
+void __exit emac_fini_debug(void)
 {
-	printk(KERN_DEBUG "%s: on-chip ethernet error:\n", dev->name);
-
-	if (em0isr & EMAC_ISR_OVR)
-		printk(KERN_DEBUG "  OVR: overrun\n");
-	if (em0isr & EMAC_ISR_PP)
-		printk(KERN_DEBUG "  PP: control pause packet\n");
-	if (em0isr & EMAC_ISR_BP)
-		printk(KERN_DEBUG "  BP: packet error\n");
-	if (em0isr & EMAC_ISR_RP)
-		printk(KERN_DEBUG "  RP: runt packet\n");
-	if (em0isr & EMAC_ISR_SE)
-		printk(KERN_DEBUG "  SE: short event\n");
-	if (em0isr & EMAC_ISR_ALE)
-		printk(KERN_DEBUG "  ALE: odd number of nibbles in packet\n");
-	if (em0isr & EMAC_ISR_BFCS)
-		printk(KERN_DEBUG "  BFCS: bad FCS\n");
-	if (em0isr & EMAC_ISR_PTLE)
-		printk(KERN_DEBUG "  PTLE: oversized packet\n");
-	if (em0isr & EMAC_ISR_ORE)
-		printk(KERN_DEBUG
-		       "  ORE: packet length field > max allowed LLC\n");
-	if (em0isr & EMAC_ISR_IRE)
-		printk(KERN_DEBUG "  IRE: In Range error\n");
-	if (em0isr & EMAC_ISR_DBDM)
-		printk(KERN_DEBUG "  DBDM: xmit error or SQE\n");
-	if (em0isr & EMAC_ISR_DB0)
-		printk(KERN_DEBUG "  DB0: xmit error or SQE on TX channel 0\n");
-	if (em0isr & EMAC_ISR_SE0)
-		printk(KERN_DEBUG
-		       "  SE0: Signal Quality Error test failure from TX channel 0\n");
-	if (em0isr & EMAC_ISR_TE0)
-		printk(KERN_DEBUG "  TE0: xmit channel 0 aborted\n");
-	if (em0isr & EMAC_ISR_DB1)
-		printk(KERN_DEBUG "  DB1: xmit error or SQE on TX channel \n");
-	if (em0isr & EMAC_ISR_SE1)
-		printk(KERN_DEBUG
-		       "  SE1: Signal Quality Error test failure from TX channel 1\n");
-	if (em0isr & EMAC_ISR_TE1)
-		printk(KERN_DEBUG "  TE1: xmit channel 1 aborted\n");
-	if (em0isr & EMAC_ISR_MOS)
-		printk(KERN_DEBUG "  MOS\n");
-	if (em0isr & EMAC_ISR_MOF)
-		printk(KERN_DEBUG "  MOF\n");
-
-	emac_mac_dump(dev);
-	emac_mal_dump(dev);
 }
+#endif				/* CONFIG_MAGIC_SYSRQ */
diff --git a/drivers/net/ibm_emac/ibm_emac_debug.h b/drivers/net/ibm_emac/ibm_emac_debug.h
new file mode 100644
index 00000000000..e85fbe0a8da
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_debug.h
@@ -0,0 +1,63 @@
+/*
+ * drivers/net/ibm_emac/ibm_ocp_debug.h
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __IBM_EMAC_DEBUG_H_
+#define __IBM_EMAC_DEBUG_H_
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include "ibm_emac_core.h"
+#include "ibm_emac_mal.h"
+
+#if defined(CONFIG_IBM_EMAC_DEBUG)
+void emac_dbg_register(int idx, struct ocp_enet_private *dev);
+void mal_dbg_register(int idx, struct ibm_ocp_mal *mal);
+int emac_init_debug(void) __init;
+void emac_fini_debug(void) __exit;
+void emac_dbg_dump_all(void);
+# define DBG_LEVEL		1
+#else
+# define emac_dbg_register(x,y) ((void)0)
+# define mal_dbg_register(x,y)	((void)0)
+# define emac_init_debug()	((void)0)
+# define emac_fini_debug()	((void)0)
+# define emac_dbg_dump_all()	((void)0)
+# define DBG_LEVEL		0
+#endif
+
+#if DBG_LEVEL > 0
+#  define DBG(f,x...)		printk("emac" f, ##x)
+#  define MAL_DBG(f,x...)	printk("mal" f, ##x)
+#  define ZMII_DBG(f,x...)	printk("zmii" f, ##x)
+#  define RGMII_DBG(f,x...)	printk("rgmii" f, ##x)
+#  define NL			"\n"
+#else
+#  define DBG(f,x...)		((void)0)
+#  define MAL_DBG(f,x...)	((void)0)
+#  define ZMII_DBG(f,x...)	((void)0)
+#  define RGMII_DBG(f,x...)	((void)0)
+#endif
+#if DBG_LEVEL > 1
+#  define DBG2(f,x...) 		DBG(f, ##x)
+#  define MAL_DBG2(f,x...) 	MAL_DBG(f, ##x)
+#  define ZMII_DBG2(f,x...) 	ZMII_DBG(f, ##x)
+#  define RGMII_DBG2(f,x...) 	RGMII_DBG(f, ##x)
+#else
+#  define DBG2(f,x...) 		((void)0)
+#  define MAL_DBG2(f,x...) 	((void)0)
+#  define ZMII_DBG2(f,x...) 	((void)0)
+#  define RGMII_DBG2(f,x...) 	((void)0)
+#endif
+
+#endif				/* __IBM_EMAC_DEBUG_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.c b/drivers/net/ibm_emac/ibm_emac_mal.c
index e59f57f363c..da88d43081c 100644
--- a/drivers/net/ibm_emac/ibm_emac_mal.c
+++ b/drivers/net/ibm_emac/ibm_emac_mal.c
@@ -1,436 +1,565 @@
 /*
- * ibm_ocp_mal.c
+ * drivers/net/ibm_emac/ibm_emac_mal.c
  *
- *      Armin Kuster akuster@mvista.com
- *      Juen, 2002
+ * Memory Access Layer (MAL) support
+ * 
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
  *
- * Copyright 2002 MontaVista Softare Inc.
+ * Based on original work by
+ *      Benjamin Herrenschmidt <benh@kernel.crashing.org>,
+ *      David Gibson <hermes@gibson.dropbear.id.au>,
+ *
+ *      Armin Kuster <akuster@mvista.com>
+ *      Copyright 2002 MontaVista Softare Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
+ *
  */
-
 #include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/netdevice.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/io.h>
-#include <asm/irq.h>
 #include <asm/ocp.h>
 
+#include "ibm_emac_core.h"
 #include "ibm_emac_mal.h"
+#include "ibm_emac_debug.h"
 
-// Locking: Should we share a lock with the client ? The client could provide
-// a lock pointer (optionally) in the commac structure... I don't think this is
-// really necessary though
-
-/* This lock protects the commac list. On today UP implementations, it's
- * really only used as IRQ protection in mal_{register,unregister}_commac()
- */
-static DEFINE_RWLOCK(mal_list_lock);
-
-int mal_register_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+int __init mal_register_commac(struct ibm_ocp_mal *mal,
+			       struct mal_commac *commac)
 {
 	unsigned long flags;
+	local_irq_save(flags);
 
-	write_lock_irqsave(&mal_list_lock, flags);
+	MAL_DBG("%d: reg(%08x, %08x)" NL, mal->def->index,
+		commac->tx_chan_mask, commac->rx_chan_mask);
 
-	/* Don't let multiple commacs claim the same channel */
+	/* Don't let multiple commacs claim the same channel(s) */
 	if ((mal->tx_chan_mask & commac->tx_chan_mask) ||
 	    (mal->rx_chan_mask & commac->rx_chan_mask)) {
-		write_unlock_irqrestore(&mal_list_lock, flags);
+		local_irq_restore(flags);
+		printk(KERN_WARNING "mal%d: COMMAC channels conflict!\n",
+		       mal->def->index);
 		return -EBUSY;
 	}
 
 	mal->tx_chan_mask |= commac->tx_chan_mask;
 	mal->rx_chan_mask |= commac->rx_chan_mask;
+	list_add(&commac->list, &mal->list);
 
-	list_add(&commac->list, &mal->commac);
-
-	write_unlock_irqrestore(&mal_list_lock, flags);
-
+	local_irq_restore(flags);
 	return 0;
 }
 
-int mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+void __exit mal_unregister_commac(struct ibm_ocp_mal *mal,
+				  struct mal_commac *commac)
 {
 	unsigned long flags;
+	local_irq_save(flags);
 
-	write_lock_irqsave(&mal_list_lock, flags);
+	MAL_DBG("%d: unreg(%08x, %08x)" NL, mal->def->index,
+		commac->tx_chan_mask, commac->rx_chan_mask);
 
 	mal->tx_chan_mask &= ~commac->tx_chan_mask;
 	mal->rx_chan_mask &= ~commac->rx_chan_mask;
-
 	list_del_init(&commac->list);
 
-	write_unlock_irqrestore(&mal_list_lock, flags);
-
-	return 0;
+	local_irq_restore(flags);
 }
 
 int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size)
 {
-	switch (channel) {
-	case 0:
-		set_mal_dcrn(mal, DCRN_MALRCBS0, size);
-		break;
-#ifdef DCRN_MALRCBS1
-	case 1:
-		set_mal_dcrn(mal, DCRN_MALRCBS1, size);
-		break;
-#endif
-#ifdef DCRN_MALRCBS2
-	case 2:
-		set_mal_dcrn(mal, DCRN_MALRCBS2, size);
-		break;
-#endif
-#ifdef DCRN_MALRCBS3
-	case 3:
-		set_mal_dcrn(mal, DCRN_MALRCBS3, size);
-		break;
-#endif
-	default:
+	struct ocp_func_mal_data *maldata = mal->def->additions;
+	BUG_ON(channel < 0 || channel >= maldata->num_rx_chans ||
+	       size > MAL_MAX_RX_SIZE);
+
+	MAL_DBG("%d: set_rbcs(%d, %lu)" NL, mal->def->index, channel, size);
+
+	if (size & 0xf) {
+		printk(KERN_WARNING
+		       "mal%d: incorrect RX size %lu for the channel %d\n",
+		       mal->def->index, size, channel);
 		return -EINVAL;
 	}
 
+	set_mal_dcrn(mal, MAL_RCBS(channel), size >> 4);
 	return 0;
 }
 
-static irqreturn_t mal_serr(int irq, void *dev_instance, struct pt_regs *regs)
+int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel)
 {
-	struct ibm_ocp_mal *mal = dev_instance;
-	unsigned long mal_error;
+	struct ocp_func_mal_data *maldata = mal->def->additions;
+	BUG_ON(channel < 0 || channel >= maldata->num_tx_chans);
+	return channel * NUM_TX_BUFF;
+}
 
-	/*
-	 * This SERR applies to one of the devices on the MAL, here we charge
-	 * it against the first EMAC registered for the MAL.
-	 */
+int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel)
+{
+	struct ocp_func_mal_data *maldata = mal->def->additions;
+	BUG_ON(channel < 0 || channel >= maldata->num_rx_chans);
+	return maldata->num_tx_chans * NUM_TX_BUFF + channel * NUM_RX_BUFF;
+}
 
-	mal_error = get_mal_dcrn(mal, DCRN_MALESR);
+void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel)
+{
+	local_bh_disable();
+	MAL_DBG("%d: enable_tx(%d)" NL, mal->def->index, channel);
+	set_mal_dcrn(mal, MAL_TXCASR,
+		     get_mal_dcrn(mal, MAL_TXCASR) | MAL_CHAN_MASK(channel));
+	local_bh_enable();
+}
 
-	printk(KERN_ERR "%s: System Error (MALESR=%lx)\n",
-	       "MAL" /* FIXME: get the name right */ , mal_error);
+void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel)
+{
+	set_mal_dcrn(mal, MAL_TXCARR, MAL_CHAN_MASK(channel));
+	MAL_DBG("%d: disable_tx(%d)" NL, mal->def->index, channel);
+}
 
-	/* FIXME: decipher error */
-	/* DIXME: distribute to commacs, if possible */
+void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel)
+{
+	local_bh_disable();
+	MAL_DBG("%d: enable_rx(%d)" NL, mal->def->index, channel);
+	set_mal_dcrn(mal, MAL_RXCASR,
+		     get_mal_dcrn(mal, MAL_RXCASR) | MAL_CHAN_MASK(channel));
+	local_bh_enable();
+}
 
-	/* Clear the error status register */
-	set_mal_dcrn(mal, DCRN_MALESR, mal_error);
+void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel)
+{
+	set_mal_dcrn(mal, MAL_RXCARR, MAL_CHAN_MASK(channel));
+	MAL_DBG("%d: disable_rx(%d)" NL, mal->def->index, channel);
+}
 
-	return IRQ_HANDLED;
+void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+{
+	local_bh_disable();
+	MAL_DBG("%d: poll_add(%p)" NL, mal->def->index, commac);
+	list_add_tail(&commac->poll_list, &mal->poll_list);
+	local_bh_enable();
 }
 
-static irqreturn_t mal_txeob(int irq, void *dev_instance, struct pt_regs *regs)
+void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+{
+	local_bh_disable();
+	MAL_DBG("%d: poll_del(%p)" NL, mal->def->index, commac);
+	list_del(&commac->poll_list);
+	local_bh_enable();
+}
+
+/* synchronized by mal_poll() */
+static inline void mal_enable_eob_irq(struct ibm_ocp_mal *mal)
+{
+	MAL_DBG2("%d: enable_irq" NL, mal->def->index);
+	set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) | MAL_CFG_EOPIE);
+}
+
+/* synchronized by __LINK_STATE_RX_SCHED bit in ndev->state */
+static inline void mal_disable_eob_irq(struct ibm_ocp_mal *mal)
+{
+	set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) & ~MAL_CFG_EOPIE);
+	MAL_DBG2("%d: disable_irq" NL, mal->def->index);
+}
+
+static irqreturn_t mal_serr(int irq, void *dev_instance, struct pt_regs *regs)
 {
 	struct ibm_ocp_mal *mal = dev_instance;
-	struct list_head *l;
-	unsigned long isr;
+	u32 esr = get_mal_dcrn(mal, MAL_ESR);
 
-	isr = get_mal_dcrn(mal, DCRN_MALTXEOBISR);
-	set_mal_dcrn(mal, DCRN_MALTXEOBISR, isr);
+	/* Clear the error status register */
+	set_mal_dcrn(mal, MAL_ESR, esr);
 
-	read_lock(&mal_list_lock);
-	list_for_each(l, &mal->commac) {
-		struct mal_commac *mc = list_entry(l, struct mal_commac, list);
+	MAL_DBG("%d: SERR %08x" NL, mal->def->index, esr);
 
-		if (isr & mc->tx_chan_mask) {
-			mc->ops->txeob(mc->dev, isr & mc->tx_chan_mask);
+	if (esr & MAL_ESR_EVB) {
+		if (esr & MAL_ESR_DE) {
+			/* We ignore Descriptor error,
+			 * TXDE or RXDE interrupt will be generated anyway.
+			 */
+			return IRQ_HANDLED;
 		}
+
+		if (esr & MAL_ESR_PEIN) {
+			/* PLB error, it's probably buggy hardware or
+			 * incorrect physical address in BD (i.e. bug)
+			 */
+			if (net_ratelimit())
+				printk(KERN_ERR
+				       "mal%d: system error, PLB (ESR = 0x%08x)\n",
+				       mal->def->index, esr);
+			return IRQ_HANDLED;
+		}
+
+		/* OPB error, it's probably buggy hardware or incorrect EBC setup */
+		if (net_ratelimit())
+			printk(KERN_ERR
+			       "mal%d: system error, OPB (ESR = 0x%08x)\n",
+			       mal->def->index, esr);
 	}
-	read_unlock(&mal_list_lock);
+	return IRQ_HANDLED;
+}
+
+static inline void mal_schedule_poll(struct ibm_ocp_mal *mal)
+{
+	if (likely(netif_rx_schedule_prep(&mal->poll_dev))) {
+		MAL_DBG2("%d: schedule_poll" NL, mal->def->index);
+		mal_disable_eob_irq(mal);
+		__netif_rx_schedule(&mal->poll_dev);
+	} else
+		MAL_DBG2("%d: already in poll" NL, mal->def->index);
+}
 
+static irqreturn_t mal_txeob(int irq, void *dev_instance, struct pt_regs *regs)
+{
+	struct ibm_ocp_mal *mal = dev_instance;
+	u32 r = get_mal_dcrn(mal, MAL_TXEOBISR);
+	MAL_DBG2("%d: txeob %08x" NL, mal->def->index, r);
+	mal_schedule_poll(mal);
+	set_mal_dcrn(mal, MAL_TXEOBISR, r);
 	return IRQ_HANDLED;
 }
 
 static irqreturn_t mal_rxeob(int irq, void *dev_instance, struct pt_regs *regs)
 {
 	struct ibm_ocp_mal *mal = dev_instance;
-	struct list_head *l;
-	unsigned long isr;
+	u32 r = get_mal_dcrn(mal, MAL_RXEOBISR);
+	MAL_DBG2("%d: rxeob %08x" NL, mal->def->index, r);
+	mal_schedule_poll(mal);
+	set_mal_dcrn(mal, MAL_RXEOBISR, r);
+	return IRQ_HANDLED;
+}
 
-	isr = get_mal_dcrn(mal, DCRN_MALRXEOBISR);
-	set_mal_dcrn(mal, DCRN_MALRXEOBISR, isr);
+static irqreturn_t mal_txde(int irq, void *dev_instance, struct pt_regs *regs)
+{
+	struct ibm_ocp_mal *mal = dev_instance;
+	u32 deir = get_mal_dcrn(mal, MAL_TXDEIR);
+	set_mal_dcrn(mal, MAL_TXDEIR, deir);
 
-	read_lock(&mal_list_lock);
-	list_for_each(l, &mal->commac) {
-		struct mal_commac *mc = list_entry(l, struct mal_commac, list);
+	MAL_DBG("%d: txde %08x" NL, mal->def->index, deir);
 
-		if (isr & mc->rx_chan_mask) {
-			mc->ops->rxeob(mc->dev, isr & mc->rx_chan_mask);
-		}
-	}
-	read_unlock(&mal_list_lock);
+	if (net_ratelimit())
+		printk(KERN_ERR
+		       "mal%d: TX descriptor error (TXDEIR = 0x%08x)\n",
+		       mal->def->index, deir);
 
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t mal_txde(int irq, void *dev_instance, struct pt_regs *regs)
+static irqreturn_t mal_rxde(int irq, void *dev_instance, struct pt_regs *regs)
 {
 	struct ibm_ocp_mal *mal = dev_instance;
 	struct list_head *l;
-	unsigned long deir;
+	u32 deir = get_mal_dcrn(mal, MAL_RXDEIR);
 
-	deir = get_mal_dcrn(mal, DCRN_MALTXDEIR);
+	MAL_DBG("%d: rxde %08x" NL, mal->def->index, deir);
 
-	/* FIXME: print which MAL correctly */
-	printk(KERN_WARNING "%s: Tx descriptor error (MALTXDEIR=%lx)\n",
-	       "MAL", deir);
-
-	read_lock(&mal_list_lock);
-	list_for_each(l, &mal->commac) {
+	list_for_each(l, &mal->list) {
 		struct mal_commac *mc = list_entry(l, struct mal_commac, list);
-
-		if (deir & mc->tx_chan_mask) {
-			mc->ops->txde(mc->dev, deir & mc->tx_chan_mask);
+		if (deir & mc->rx_chan_mask) {
+			mc->rx_stopped = 1;
+			mc->ops->rxde(mc->dev);
 		}
 	}
-	read_unlock(&mal_list_lock);
+
+	mal_schedule_poll(mal);
+	set_mal_dcrn(mal, MAL_RXDEIR, deir);
 
 	return IRQ_HANDLED;
 }
 
-/*
- * This interrupt should be very rare at best.  This occurs when
- * the hardware has a problem with the receive descriptors.  The manual
- * states that it occurs when the hardware cannot the receive descriptor
- * empty bit is not set.  The recovery mechanism will be to
- * traverse through the descriptors, handle any that are marked to be
- * handled and reinitialize each along the way.  At that point the driver
- * will be restarted.
- */
-static irqreturn_t mal_rxde(int irq, void *dev_instance, struct pt_regs *regs)
+static int mal_poll(struct net_device *ndev, int *budget)
 {
-	struct ibm_ocp_mal *mal = dev_instance;
+	struct ibm_ocp_mal *mal = ndev->priv;
 	struct list_head *l;
-	unsigned long deir;
-
-	deir = get_mal_dcrn(mal, DCRN_MALRXDEIR);
+	int rx_work_limit = min(ndev->quota, *budget), received = 0, done;
+
+	MAL_DBG2("%d: poll(%d) %d ->" NL, mal->def->index, *budget,
+		 rx_work_limit);
+      again:
+	/* Process TX skbs */
+	list_for_each(l, &mal->poll_list) {
+		struct mal_commac *mc =
+		    list_entry(l, struct mal_commac, poll_list);
+		mc->ops->poll_tx(mc->dev);
+	}
 
-	/*
-	 * This really is needed.  This case encountered in stress testing.
+	/* Process RX skbs.
+	 * We _might_ need something more smart here to enforce polling fairness.
 	 */
-	if (deir == 0)
-		return IRQ_HANDLED;
-
-	/* FIXME: print which MAL correctly */
-	printk(KERN_WARNING "%s: Rx descriptor error (MALRXDEIR=%lx)\n",
-	       "MAL", deir);
-
-	read_lock(&mal_list_lock);
-	list_for_each(l, &mal->commac) {
-		struct mal_commac *mc = list_entry(l, struct mal_commac, list);
+	list_for_each(l, &mal->poll_list) {
+		struct mal_commac *mc =
+		    list_entry(l, struct mal_commac, poll_list);
+		int n = mc->ops->poll_rx(mc->dev, rx_work_limit);
+		if (n) {
+			received += n;
+			rx_work_limit -= n;
+			if (rx_work_limit <= 0) {
+				done = 0;
+				goto more_work;	// XXX What if this is the last one ?
+			}
+		}
+	}
 
-		if (deir & mc->rx_chan_mask) {
-			mc->ops->rxde(mc->dev, deir & mc->rx_chan_mask);
+	/* We need to disable IRQs to protect from RXDE IRQ here */
+	local_irq_disable();
+	__netif_rx_complete(ndev);
+	mal_enable_eob_irq(mal);
+	local_irq_enable();
+
+	done = 1;
+
+	/* Check for "rotting" packet(s) */
+	list_for_each(l, &mal->poll_list) {
+		struct mal_commac *mc =
+		    list_entry(l, struct mal_commac, poll_list);
+		if (unlikely(mc->ops->peek_rx(mc->dev) || mc->rx_stopped)) {
+			MAL_DBG2("%d: rotting packet" NL, mal->def->index);
+			if (netif_rx_reschedule(ndev, received))
+				mal_disable_eob_irq(mal);
+			else
+				MAL_DBG2("%d: already in poll list" NL,
+					 mal->def->index);
+
+			if (rx_work_limit > 0)
+				goto again;
+			else
+				goto more_work;
 		}
+		mc->ops->poll_tx(mc->dev);
 	}
-	read_unlock(&mal_list_lock);
 
-	return IRQ_HANDLED;
+      more_work:
+	ndev->quota -= received;
+	*budget -= received;
+
+	MAL_DBG2("%d: poll() %d <- %d" NL, mal->def->index, *budget,
+		 done ? 0 : 1);
+	return done ? 0 : 1;
+}
+
+static void mal_reset(struct ibm_ocp_mal *mal)
+{
+	int n = 10;
+	MAL_DBG("%d: reset" NL, mal->def->index);
+
+	set_mal_dcrn(mal, MAL_CFG, MAL_CFG_SR);
+
+	/* Wait for reset to complete (1 system clock) */
+	while ((get_mal_dcrn(mal, MAL_CFG) & MAL_CFG_SR) && n)
+		--n;
+
+	if (unlikely(!n))
+		printk(KERN_ERR "mal%d: reset timeout\n", mal->def->index);
+}
+
+int mal_get_regs_len(struct ibm_ocp_mal *mal)
+{
+	return sizeof(struct emac_ethtool_regs_subhdr) +
+	    sizeof(struct ibm_mal_regs);
+}
+
+void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf)
+{
+	struct emac_ethtool_regs_subhdr *hdr = buf;
+	struct ibm_mal_regs *regs = (struct ibm_mal_regs *)(hdr + 1);
+	struct ocp_func_mal_data *maldata = mal->def->additions;
+	int i;
+
+	hdr->version = MAL_VERSION;
+	hdr->index = mal->def->index;
+
+	regs->tx_count = maldata->num_tx_chans;
+	regs->rx_count = maldata->num_rx_chans;
+
+	regs->cfg = get_mal_dcrn(mal, MAL_CFG);
+	regs->esr = get_mal_dcrn(mal, MAL_ESR);
+	regs->ier = get_mal_dcrn(mal, MAL_IER);
+	regs->tx_casr = get_mal_dcrn(mal, MAL_TXCASR);
+	regs->tx_carr = get_mal_dcrn(mal, MAL_TXCARR);
+	regs->tx_eobisr = get_mal_dcrn(mal, MAL_TXEOBISR);
+	regs->tx_deir = get_mal_dcrn(mal, MAL_TXDEIR);
+	regs->rx_casr = get_mal_dcrn(mal, MAL_RXCASR);
+	regs->rx_carr = get_mal_dcrn(mal, MAL_RXCARR);
+	regs->rx_eobisr = get_mal_dcrn(mal, MAL_RXEOBISR);
+	regs->rx_deir = get_mal_dcrn(mal, MAL_RXDEIR);
+
+	for (i = 0; i < regs->tx_count; ++i)
+		regs->tx_ctpr[i] = get_mal_dcrn(mal, MAL_TXCTPR(i));
+
+	for (i = 0; i < regs->rx_count; ++i) {
+		regs->rx_ctpr[i] = get_mal_dcrn(mal, MAL_RXCTPR(i));
+		regs->rcbs[i] = get_mal_dcrn(mal, MAL_RCBS(i));
+	}
+	return regs + 1;
 }
 
 static int __init mal_probe(struct ocp_device *ocpdev)
 {
-	struct ibm_ocp_mal *mal = NULL;
+	struct ibm_ocp_mal *mal;
 	struct ocp_func_mal_data *maldata;
-	int err = 0;
+	int err = 0, i, bd_size;
+
+	MAL_DBG("%d: probe" NL, ocpdev->def->index);
 
-	maldata = (struct ocp_func_mal_data *)ocpdev->def->additions;
+	maldata = ocpdev->def->additions;
 	if (maldata == NULL) {
-		printk(KERN_ERR "mal%d: Missing additional datas !\n",
+		printk(KERN_ERR "mal%d: missing additional data!\n",
 		       ocpdev->def->index);
 		return -ENODEV;
 	}
 
-	mal = kmalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL);
-	if (mal == NULL) {
+	mal = kzalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL);
+	if (!mal) {
 		printk(KERN_ERR
-		       "mal%d: Out of memory allocating MAL structure !\n",
+		       "mal%d: out of memory allocating MAL structure!\n",
 		       ocpdev->def->index);
 		return -ENOMEM;
 	}
-	memset(mal, 0, sizeof(*mal));
-
-	switch (ocpdev->def->index) {
-	case 0:
-		mal->dcrbase = DCRN_MAL_BASE;
-		break;
-#ifdef DCRN_MAL1_BASE
-	case 1:
-		mal->dcrbase = DCRN_MAL1_BASE;
-		break;
-#endif
-	default:
-		BUG();
-	}
-
-	/**************************/
+	mal->dcrbase = maldata->dcr_base;
+	mal->def = ocpdev->def;
 
-	INIT_LIST_HEAD(&mal->commac);
+	INIT_LIST_HEAD(&mal->poll_list);
+	set_bit(__LINK_STATE_START, &mal->poll_dev.state);
+	mal->poll_dev.weight = CONFIG_IBM_EMAC_POLL_WEIGHT;
+	mal->poll_dev.poll = mal_poll;
+	mal->poll_dev.priv = mal;
+	atomic_set(&mal->poll_dev.refcnt, 1);
 
-	set_mal_dcrn(mal, DCRN_MALRXCARR, 0xFFFFFFFF);
-	set_mal_dcrn(mal, DCRN_MALTXCARR, 0xFFFFFFFF);
+	INIT_LIST_HEAD(&mal->list);
 
-	set_mal_dcrn(mal, DCRN_MALCR, MALCR_MMSR);	/* 384 */
-	/* FIXME: Add delay */
+	/* Load power-on reset defaults */
+	mal_reset(mal);
 
 	/* Set the MAL configuration register */
-	set_mal_dcrn(mal, DCRN_MALCR,
-		     MALCR_PLBB | MALCR_OPBBL | MALCR_LEA |
-		     MALCR_PLBLT_DEFAULT);
-
-	/* It would be nice to allocate buffers separately for each
-	 * channel, but we can't because the channels share the upper
-	 * 13 bits of address lines.  Each channels buffer must also
-	 * be 4k aligned, so we allocate 4k for each channel.  This is
-	 * inefficient FIXME: do better, if possible */
-	mal->tx_virt_addr = dma_alloc_coherent(&ocpdev->dev,
-					       MAL_DT_ALIGN *
-					       maldata->num_tx_chans,
-					       &mal->tx_phys_addr, GFP_KERNEL);
-	if (mal->tx_virt_addr == NULL) {
+	set_mal_dcrn(mal, MAL_CFG, MAL_CFG_DEFAULT | MAL_CFG_PLBB |
+		     MAL_CFG_OPBBL | MAL_CFG_LEA);
+
+	mal_enable_eob_irq(mal);
+
+	/* Allocate space for BD rings */
+	BUG_ON(maldata->num_tx_chans <= 0 || maldata->num_tx_chans > 32);
+	BUG_ON(maldata->num_rx_chans <= 0 || maldata->num_rx_chans > 32);
+	bd_size = sizeof(struct mal_descriptor) *
+	    (NUM_TX_BUFF * maldata->num_tx_chans +
+	     NUM_RX_BUFF * maldata->num_rx_chans);
+	mal->bd_virt =
+	    dma_alloc_coherent(&ocpdev->dev, bd_size, &mal->bd_dma, GFP_KERNEL);
+
+	if (!mal->bd_virt) {
 		printk(KERN_ERR
-		       "mal%d: Out of memory allocating MAL descriptors !\n",
-		       ocpdev->def->index);
+		       "mal%d: out of memory allocating RX/TX descriptors!\n",
+		       mal->def->index);
 		err = -ENOMEM;
 		goto fail;
 	}
+	memset(mal->bd_virt, 0, bd_size);
 
-	/* God, oh, god, I hate DCRs */
-	set_mal_dcrn(mal, DCRN_MALTXCTP0R, mal->tx_phys_addr);
-#ifdef DCRN_MALTXCTP1R
-	if (maldata->num_tx_chans > 1)
-		set_mal_dcrn(mal, DCRN_MALTXCTP1R,
-			     mal->tx_phys_addr + MAL_DT_ALIGN);
-#endif				/* DCRN_MALTXCTP1R */
-#ifdef DCRN_MALTXCTP2R
-	if (maldata->num_tx_chans > 2)
-		set_mal_dcrn(mal, DCRN_MALTXCTP2R,
-			     mal->tx_phys_addr + 2 * MAL_DT_ALIGN);
-#endif				/* DCRN_MALTXCTP2R */
-#ifdef DCRN_MALTXCTP3R
-	if (maldata->num_tx_chans > 3)
-		set_mal_dcrn(mal, DCRN_MALTXCTP3R,
-			     mal->tx_phys_addr + 3 * MAL_DT_ALIGN);
-#endif				/* DCRN_MALTXCTP3R */
-#ifdef DCRN_MALTXCTP4R
-	if (maldata->num_tx_chans > 4)
-		set_mal_dcrn(mal, DCRN_MALTXCTP4R,
-			     mal->tx_phys_addr + 4 * MAL_DT_ALIGN);
-#endif				/* DCRN_MALTXCTP4R */
-#ifdef DCRN_MALTXCTP5R
-	if (maldata->num_tx_chans > 5)
-		set_mal_dcrn(mal, DCRN_MALTXCTP5R,
-			     mal->tx_phys_addr + 5 * MAL_DT_ALIGN);
-#endif				/* DCRN_MALTXCTP5R */
-#ifdef DCRN_MALTXCTP6R
-	if (maldata->num_tx_chans > 6)
-		set_mal_dcrn(mal, DCRN_MALTXCTP6R,
-			     mal->tx_phys_addr + 6 * MAL_DT_ALIGN);
-#endif				/* DCRN_MALTXCTP6R */
-#ifdef DCRN_MALTXCTP7R
-	if (maldata->num_tx_chans > 7)
-		set_mal_dcrn(mal, DCRN_MALTXCTP7R,
-			     mal->tx_phys_addr + 7 * MAL_DT_ALIGN);
-#endif				/* DCRN_MALTXCTP7R */
-
-	mal->rx_virt_addr = dma_alloc_coherent(&ocpdev->dev,
-					       MAL_DT_ALIGN *
-					       maldata->num_rx_chans,
-					       &mal->rx_phys_addr, GFP_KERNEL);
-
-	set_mal_dcrn(mal, DCRN_MALRXCTP0R, mal->rx_phys_addr);
-#ifdef DCRN_MALRXCTP1R
-	if (maldata->num_rx_chans > 1)
-		set_mal_dcrn(mal, DCRN_MALRXCTP1R,
-			     mal->rx_phys_addr + MAL_DT_ALIGN);
-#endif				/* DCRN_MALRXCTP1R */
-#ifdef DCRN_MALRXCTP2R
-	if (maldata->num_rx_chans > 2)
-		set_mal_dcrn(mal, DCRN_MALRXCTP2R,
-			     mal->rx_phys_addr + 2 * MAL_DT_ALIGN);
-#endif				/* DCRN_MALRXCTP2R */
-#ifdef DCRN_MALRXCTP3R
-	if (maldata->num_rx_chans > 3)
-		set_mal_dcrn(mal, DCRN_MALRXCTP3R,
-			     mal->rx_phys_addr + 3 * MAL_DT_ALIGN);
-#endif				/* DCRN_MALRXCTP3R */
+	for (i = 0; i < maldata->num_tx_chans; ++i)
+		set_mal_dcrn(mal, MAL_TXCTPR(i), mal->bd_dma +
+			     sizeof(struct mal_descriptor) *
+			     mal_tx_bd_offset(mal, i));
+
+	for (i = 0; i < maldata->num_rx_chans; ++i)
+		set_mal_dcrn(mal, MAL_RXCTPR(i), mal->bd_dma +
+			     sizeof(struct mal_descriptor) *
+			     mal_rx_bd_offset(mal, i));
 
 	err = request_irq(maldata->serr_irq, mal_serr, 0, "MAL SERR", mal);
 	if (err)
-		goto fail;
-	err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE ", mal);
+		goto fail2;
+	err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE", mal);
 	if (err)
-		goto fail;
+		goto fail3;
 	err = request_irq(maldata->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal);
 	if (err)
-		goto fail;
+		goto fail4;
 	err = request_irq(maldata->rxde_irq, mal_rxde, 0, "MAL RX DE", mal);
 	if (err)
-		goto fail;
+		goto fail5;
 	err = request_irq(maldata->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal);
 	if (err)
-		goto fail;
+		goto fail6;
 
-	set_mal_dcrn(mal, DCRN_MALIER,
-		     MALIER_DE | MALIER_NE | MALIER_TE |
-		     MALIER_OPBE | MALIER_PLBE);
+	/* Enable all MAL SERR interrupt sources */
+	set_mal_dcrn(mal, MAL_IER, MAL_IER_EVENTS);
 
-	/* Advertise me to the rest of the world */
+	/* Advertise this instance to the rest of the world */
 	ocp_set_drvdata(ocpdev, mal);
 
-	printk(KERN_INFO "mal%d: Initialized, %d tx channels, %d rx channels\n",
-	       ocpdev->def->index, maldata->num_tx_chans,
-	       maldata->num_rx_chans);
+	mal_dbg_register(mal->def->index, mal);
 
+	printk(KERN_INFO "mal%d: initialized, %d TX channels, %d RX channels\n",
+	       mal->def->index, maldata->num_tx_chans, maldata->num_rx_chans);
 	return 0;
 
+      fail6:
+	free_irq(maldata->rxde_irq, mal);
+      fail5:
+	free_irq(maldata->txeob_irq, mal);
+      fail4:
+	free_irq(maldata->txde_irq, mal);
+      fail3:
+	free_irq(maldata->serr_irq, mal);
+      fail2:
+	dma_free_coherent(&ocpdev->dev, bd_size, mal->bd_virt, mal->bd_dma);
       fail:
-	/* FIXME: dispose requested IRQs ! */
-	if (err && mal)
-		kfree(mal);
+	kfree(mal);
 	return err;
 }
 
 static void __exit mal_remove(struct ocp_device *ocpdev)
 {
 	struct ibm_ocp_mal *mal = ocp_get_drvdata(ocpdev);
-	struct ocp_func_mal_data *maldata = ocpdev->def->additions;
+	struct ocp_func_mal_data *maldata = mal->def->additions;
+
+	MAL_DBG("%d: remove" NL, mal->def->index);
 
-	BUG_ON(!maldata);
+	/* Syncronize with scheduled polling, 
+	   stolen from net/core/dev.c:dev_close() 
+	 */
+	clear_bit(__LINK_STATE_START, &mal->poll_dev.state);
+	netif_poll_disable(&mal->poll_dev);
+
+	if (!list_empty(&mal->list)) {
+		/* This is *very* bad */
+		printk(KERN_EMERG
+		       "mal%d: commac list is not empty on remove!\n",
+		       mal->def->index);
+	}
 
 	ocp_set_drvdata(ocpdev, NULL);
 
-	/* FIXME: shut down the MAL, deal with dependency with emac */
 	free_irq(maldata->serr_irq, mal);
 	free_irq(maldata->txde_irq, mal);
 	free_irq(maldata->txeob_irq, mal);
 	free_irq(maldata->rxde_irq, mal);
 	free_irq(maldata->rxeob_irq, mal);
 
-	if (mal->tx_virt_addr)
-		dma_free_coherent(&ocpdev->dev,
-				  MAL_DT_ALIGN * maldata->num_tx_chans,
-				  mal->tx_virt_addr, mal->tx_phys_addr);
+	mal_reset(mal);
 
-	if (mal->rx_virt_addr)
-		dma_free_coherent(&ocpdev->dev,
-				  MAL_DT_ALIGN * maldata->num_rx_chans,
-				  mal->rx_virt_addr, mal->rx_phys_addr);
+	mal_dbg_register(mal->def->index, NULL);
+
+	dma_free_coherent(&ocpdev->dev,
+			  sizeof(struct mal_descriptor) *
+			  (NUM_TX_BUFF * maldata->num_tx_chans +
+			   NUM_RX_BUFF * maldata->num_rx_chans), mal->bd_virt,
+			  mal->bd_dma);
 
 	kfree(mal);
 }
 
 /* Structure for a device driver */
 static struct ocp_device_id mal_ids[] = {
-	{.vendor = OCP_ANY_ID,.function = OCP_FUNC_MAL},
-	{.vendor = OCP_VENDOR_INVALID}
+	{ .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_MAL },
+	{ .vendor = OCP_VENDOR_INVALID}
 };
 
 static struct ocp_driver mal_driver = {
@@ -441,23 +570,14 @@ static struct ocp_driver mal_driver = {
 	.remove = mal_remove,
 };
 
-static int __init init_mals(void)
+int __init mal_init(void)
 {
-	int rc;
-
-	rc = ocp_register_driver(&mal_driver);
-	if (rc < 0) {
-		ocp_unregister_driver(&mal_driver);
-		return -ENODEV;
-	}
-
-	return 0;
+	MAL_DBG(": init" NL);
+	return ocp_register_driver(&mal_driver);
 }
 
-static void __exit exit_mals(void)
+void __exit mal_exit(void)
 {
+	MAL_DBG(": exit" NL);
 	ocp_unregister_driver(&mal_driver);
 }
-
-module_init(init_mals);
-module_exit(exit_mals);
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h
index dd9f0dabc6e..15b0bdae26a 100644
--- a/drivers/net/ibm_emac/ibm_emac_mal.h
+++ b/drivers/net/ibm_emac/ibm_emac_mal.h
@@ -1,131 +1,267 @@
-#ifndef _IBM_EMAC_MAL_H
-#define _IBM_EMAC_MAL_H
+/*
+ * drivers/net/ibm_emac/ibm_emac_mal.h
+ *
+ * Memory Access Layer (MAL) support
+ * 
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ *      Armin Kuster <akuster@mvista.com>
+ *      Copyright 2002 MontaVista Softare Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __IBM_EMAC_MAL_H_
+#define __IBM_EMAC_MAL_H_
 
+#include <linux/config.h>
+#include <linux/init.h>
 #include <linux/list.h>
+#include <linux/netdevice.h>
 
-#define MAL_DT_ALIGN	(4096)	/* Alignment for each channel's descriptor table */
+#include <asm/io.h>
 
-#define MAL_CHAN_MASK(chan)	(0x80000000 >> (chan))
+/*
+ * These MAL "versions" probably aren't the real versions IBM uses for these 
+ * MAL cores, I assigned them just to make #ifdefs in this file nicer and 
+ * reflect the fact that 40x and 44x have slightly different MALs. --ebs
+ */
+#if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \
+    defined(CONFIG_440EP) || defined(CONFIG_NP405H)
+#define MAL_VERSION		1
+#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#define MAL_VERSION		2
+#else
+#error "Unknown SoC, please check chip manual and choose MAL 'version'"
+#endif
+
+/* MALx DCR registers */
+#define	MAL_CFG			0x00
+#define	  MAL_CFG_SR		0x80000000
+#define   MAL_CFG_PLBB		0x00004000
+#define   MAL_CFG_OPBBL		0x00000080
+#define   MAL_CFG_EOPIE		0x00000004
+#define   MAL_CFG_LEA		0x00000002
+#define   MAL_CFG_SD		0x00000001
+#if MAL_VERSION == 1
+#define   MAL_CFG_PLBP_MASK	0x00c00000
+#define   MAL_CFG_PLBP_10	0x00800000
+#define   MAL_CFG_GA		0x00200000
+#define   MAL_CFG_OA		0x00100000
+#define   MAL_CFG_PLBLE		0x00080000
+#define   MAL_CFG_PLBT_MASK	0x00078000
+#define   MAL_CFG_DEFAULT	(MAL_CFG_PLBP_10 | MAL_CFG_PLBT_MASK)
+#elif MAL_VERSION == 2
+#define   MAL_CFG_RPP_MASK	0x00c00000
+#define   MAL_CFG_RPP_10	0x00800000
+#define   MAL_CFG_RMBS_MASK	0x00300000
+#define   MAL_CFG_WPP_MASK	0x000c0000
+#define   MAL_CFG_WPP_10	0x00080000
+#define   MAL_CFG_WMBS_MASK	0x00030000
+#define   MAL_CFG_PLBLE		0x00008000
+#define   MAL_CFG_DEFAULT	(MAL_CFG_RMBS_MASK | MAL_CFG_WMBS_MASK | \
+				 MAL_CFG_RPP_10 | MAL_CFG_WPP_10)
+#else
+#error "Unknown MAL version"
+#endif
+
+#define MAL_ESR			0x01
+#define   MAL_ESR_EVB		0x80000000
+#define   MAL_ESR_CIDT		0x40000000
+#define   MAL_ESR_CID_MASK	0x3e000000
+#define   MAL_ESR_CID_SHIFT	25
+#define   MAL_ESR_DE		0x00100000
+#define   MAL_ESR_OTE		0x00040000
+#define   MAL_ESR_OSE		0x00020000
+#define   MAL_ESR_PEIN		0x00010000
+#define   MAL_ESR_DEI		0x00000010
+#define   MAL_ESR_OTEI		0x00000004
+#define   MAL_ESR_OSEI		0x00000002
+#define   MAL_ESR_PBEI		0x00000001
+#if MAL_VERSION == 1
+#define   MAL_ESR_ONE		0x00080000
+#define   MAL_ESR_ONEI		0x00000008
+#elif MAL_VERSION == 2
+#define   MAL_ESR_PTE		0x00800000
+#define   MAL_ESR_PRE		0x00400000
+#define   MAL_ESR_PWE		0x00200000
+#define   MAL_ESR_PTEI		0x00000080
+#define   MAL_ESR_PREI		0x00000040
+#define   MAL_ESR_PWEI		0x00000020
+#else
+#error "Unknown MAL version"
+#endif
+
+#define MAL_IER			0x02
+#define   MAL_IER_DE		0x00000010
+#define   MAL_IER_OTE		0x00000004
+#define   MAL_IER_OE		0x00000002
+#define   MAL_IER_PE		0x00000001
+#if MAL_VERSION == 1
+#define   MAL_IER_NWE		0x00000008
+#define   MAL_IER_SOC_EVENTS	MAL_IER_NWE
+#elif MAL_VERSION == 2
+#define   MAL_IER_PT		0x00000080
+#define   MAL_IER_PRE		0x00000040
+#define   MAL_IER_PWE		0x00000020
+#define   MAL_IER_SOC_EVENTS	(MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE)
+#else
+#error "Unknown MAL version"
+#endif
+#define   MAL_IER_EVENTS	(MAL_IER_SOC_EVENTS | MAL_IER_OTE | \
+				 MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE)
+
+#define MAL_TXCASR		0x04
+#define MAL_TXCARR		0x05
+#define MAL_TXEOBISR		0x06
+#define MAL_TXDEIR		0x07
+#define MAL_RXCASR		0x10
+#define MAL_RXCARR		0x11
+#define MAL_RXEOBISR		0x12
+#define MAL_RXDEIR		0x13
+#define MAL_TXCTPR(n)		((n) + 0x20)
+#define MAL_RXCTPR(n)		((n) + 0x40)
+#define MAL_RCBS(n)		((n) + 0x60)
+
+/* In reality MAL can handle TX buffers up to 4095 bytes long, 
+ * but this isn't a good round number :) 		 --ebs
+ */
+#define MAL_MAX_TX_SIZE		4080
+#define MAL_MAX_RX_SIZE		4080
+
+static inline int mal_rx_size(int len)
+{
+	len = (len + 0xf) & ~0xf;
+	return len > MAL_MAX_RX_SIZE ? MAL_MAX_RX_SIZE : len;
+}
+
+static inline int mal_tx_chunks(int len)
+{
+	return (len + MAL_MAX_TX_SIZE - 1) / MAL_MAX_TX_SIZE;
+}
+
+#define MAL_CHAN_MASK(n)	(0x80000000 >> (n))
 
 /* MAL Buffer Descriptor structure */
 struct mal_descriptor {
-	unsigned short ctrl;	/* MAL / Commac status control bits */
-	short data_len;		/* Max length is 4K-1 (12 bits)     */
-	unsigned char *data_ptr;	/* pointer to actual data buffer    */
-} __attribute__ ((packed));
+	u16 ctrl;		/* MAL / Commac status control bits */
+	u16 data_len;		/* Max length is 4K-1 (12 bits)     */
+	u32 data_ptr;		/* pointer to actual data buffer    */
+};
 
 /* the following defines are for the MadMAL status and control registers. */
 /* MADMAL transmit and receive status/control bits  */
-#define MAL_RX_CTRL_EMPTY		0x8000
-#define MAL_RX_CTRL_WRAP		0x4000
-#define MAL_RX_CTRL_CM			0x2000
-#define MAL_RX_CTRL_LAST		0x1000
-#define MAL_RX_CTRL_FIRST		0x0800
-#define MAL_RX_CTRL_INTR		0x0400
-
-#define MAL_TX_CTRL_READY		0x8000
-#define MAL_TX_CTRL_WRAP		0x4000
-#define MAL_TX_CTRL_CM			0x2000
-#define MAL_TX_CTRL_LAST		0x1000
-#define MAL_TX_CTRL_INTR		0x0400
+#define MAL_RX_CTRL_EMPTY	0x8000
+#define MAL_RX_CTRL_WRAP	0x4000
+#define MAL_RX_CTRL_CM		0x2000
+#define MAL_RX_CTRL_LAST	0x1000
+#define MAL_RX_CTRL_FIRST	0x0800
+#define MAL_RX_CTRL_INTR	0x0400
+#define MAL_RX_CTRL_SINGLE	(MAL_RX_CTRL_LAST | MAL_RX_CTRL_FIRST)
+#define MAL_IS_SINGLE_RX(ctrl)	(((ctrl) & MAL_RX_CTRL_SINGLE) == MAL_RX_CTRL_SINGLE)
+
+#define MAL_TX_CTRL_READY	0x8000
+#define MAL_TX_CTRL_WRAP	0x4000
+#define MAL_TX_CTRL_CM		0x2000
+#define MAL_TX_CTRL_LAST	0x1000
+#define MAL_TX_CTRL_INTR	0x0400
 
 struct mal_commac_ops {
-	void (*txeob) (void *dev, u32 chanmask);
-	void (*txde) (void *dev, u32 chanmask);
-	void (*rxeob) (void *dev, u32 chanmask);
-	void (*rxde) (void *dev, u32 chanmask);
+	void	(*poll_tx) (void *dev);
+	int	(*poll_rx) (void *dev, int budget);
+	int	(*peek_rx) (void *dev);
+	void	(*rxde) (void *dev);
 };
 
 struct mal_commac {
-	struct mal_commac_ops *ops;
-	void *dev;
-	u32 tx_chan_mask, rx_chan_mask;
-	struct list_head list;
+	struct mal_commac_ops	*ops;
+	void			*dev;
+	struct list_head	poll_list;
+	int			rx_stopped;
+
+	u32			tx_chan_mask;
+	u32			rx_chan_mask;
+	struct list_head	list;
 };
 
 struct ibm_ocp_mal {
-	int dcrbase;
+	int			dcrbase;
 
-	struct list_head commac;
-	u32 tx_chan_mask, rx_chan_mask;
+	struct list_head	poll_list;
+	struct net_device	poll_dev;
 
-	dma_addr_t tx_phys_addr;
-	struct mal_descriptor *tx_virt_addr;
+	struct list_head	list;
+	u32			tx_chan_mask;
+	u32			rx_chan_mask;
 
-	dma_addr_t rx_phys_addr;
-	struct mal_descriptor *rx_virt_addr;
-};
+	dma_addr_t		bd_dma;
+	struct mal_descriptor	*bd_virt;
 
-#define GET_MAL_STANZA(base,dcrn) \
-	case base: \
-		x = mfdcr(dcrn(base)); \
-		break;
-
-#define SET_MAL_STANZA(base,dcrn, val) \
-	case base: \
-		mtdcr(dcrn(base), (val)); \
-		break;
-
-#define GET_MAL0_STANZA(dcrn) GET_MAL_STANZA(DCRN_MAL_BASE,dcrn)
-#define SET_MAL0_STANZA(dcrn,val) SET_MAL_STANZA(DCRN_MAL_BASE,dcrn,val)
-
-#ifdef DCRN_MAL1_BASE
-#define GET_MAL1_STANZA(dcrn) GET_MAL_STANZA(DCRN_MAL1_BASE,dcrn)
-#define SET_MAL1_STANZA(dcrn,val) SET_MAL_STANZA(DCRN_MAL1_BASE,dcrn,val)
-#else				/* ! DCRN_MAL1_BASE */
-#define GET_MAL1_STANZA(dcrn)
-#define SET_MAL1_STANZA(dcrn,val)
-#endif
+	struct ocp_def		*def;
+};
 
-#define get_mal_dcrn(mal, dcrn) ({ \
-	u32 x; \
-	switch ((mal)->dcrbase) { \
-		GET_MAL0_STANZA(dcrn) \
-		GET_MAL1_STANZA(dcrn) \
-	default: \
-		x = 0; \
-		BUG(); \
-	} \
-x; })
-
-#define set_mal_dcrn(mal, dcrn, val) do { \
-	switch ((mal)->dcrbase) { \
-		SET_MAL0_STANZA(dcrn,val) \
-		SET_MAL1_STANZA(dcrn,val) \
-	default: \
-		BUG(); \
-	} } while (0)
-
-static inline void mal_enable_tx_channels(struct ibm_ocp_mal *mal, u32 chanmask)
+static inline u32 get_mal_dcrn(struct ibm_ocp_mal *mal, int reg)
 {
-	set_mal_dcrn(mal, DCRN_MALTXCASR,
-		     get_mal_dcrn(mal, DCRN_MALTXCASR) | chanmask);
+	return mfdcr(mal->dcrbase + reg);
 }
 
-static inline void mal_disable_tx_channels(struct ibm_ocp_mal *mal,
-					   u32 chanmask)
+static inline void set_mal_dcrn(struct ibm_ocp_mal *mal, int reg, u32 val)
 {
-	set_mal_dcrn(mal, DCRN_MALTXCARR, chanmask);
+	mtdcr(mal->dcrbase + reg, val);
 }
 
-static inline void mal_enable_rx_channels(struct ibm_ocp_mal *mal, u32 chanmask)
-{
-	set_mal_dcrn(mal, DCRN_MALRXCASR,
-		     get_mal_dcrn(mal, DCRN_MALRXCASR) | chanmask);
-}
+/* Register MAL devices */
+int mal_init(void) __init;
+void mal_exit(void) __exit;
 
-static inline void mal_disable_rx_channels(struct ibm_ocp_mal *mal,
-					   u32 chanmask)
-{
-	set_mal_dcrn(mal, DCRN_MALRXCARR, chanmask);
-}
+int mal_register_commac(struct ibm_ocp_mal *mal,
+			struct mal_commac *commac) __init;
+void mal_unregister_commac(struct ibm_ocp_mal *mal,
+			   struct mal_commac *commac) __exit;
+int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size);
+
+/* Returns BD ring offset for a particular channel
+   (in 'struct mal_descriptor' elements)
+*/
+int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel);
+int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel);
+
+void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel);
+void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel);
+void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel);
+void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel);
 
-extern int mal_register_commac(struct ibm_ocp_mal *mal,
-			       struct mal_commac *commac);
-extern int mal_unregister_commac(struct ibm_ocp_mal *mal,
-				 struct mal_commac *commac);
+/* Add/remove EMAC to/from MAL polling list */
+void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac);
+void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac);
+
+/* Ethtool MAL registers */
+struct ibm_mal_regs {
+	u32 tx_count;
+	u32 rx_count;
+
+	u32 cfg;
+	u32 esr;
+	u32 ier;
+	u32 tx_casr;
+	u32 tx_carr;
+	u32 tx_eobisr;
+	u32 tx_deir;
+	u32 rx_casr;
+	u32 rx_carr;
+	u32 rx_eobisr;
+	u32 rx_deir;
+	u32 tx_ctpr[32];
+	u32 rx_ctpr[32];
+	u32 rcbs[32];
+};
 
-extern int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel,
-			unsigned long size);
+int mal_get_regs_len(struct ibm_ocp_mal *mal);
+void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf);
 
-#endif				/* _IBM_EMAC_MAL_H */
+#endif				/* __IBM_EMAC_MAL_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_phy.c b/drivers/net/ibm_emac/ibm_emac_phy.c
index 14213f090e9..a27e49cfe43 100644
--- a/drivers/net/ibm_emac/ibm_emac_phy.c
+++ b/drivers/net/ibm_emac/ibm_emac_phy.c
@@ -1,96 +1,80 @@
 /*
- * ibm_ocp_phy.c
+ * drivers/net/ibm_emac/ibm_emac_phy.c
  *
- * PHY drivers for the ibm ocp ethernet driver. Borrowed
- * from sungem_phy.c, though I only kept the generic MII
+ * Driver for PowerPC 4xx on-chip ethernet controller, PHY support.
+ * Borrowed from sungem_phy.c, though I only kept the generic MII
  * driver for now.
  * 
  * This file should be shared with other drivers or eventually
  * merged as the "low level" part of miilib
  * 
  * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
+ * (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net>
  *
  */
-
 #include <linux/config.h>
-
 #include <linux/module.h>
-
 #include <linux/kernel.h>
-#include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/netdevice.h>
-#include <linux/etherdevice.h>
 #include <linux/mii.h>
 #include <linux/ethtool.h>
 #include <linux/delay.h>
 
+#include <asm/ocp.h>
+
 #include "ibm_emac_phy.h"
 
-static int reset_one_mii_phy(struct mii_phy *phy, int phy_id)
+static inline int phy_read(struct mii_phy *phy, int reg)
+{
+	return phy->mdio_read(phy->dev, phy->address, reg);
+}
+
+static inline void phy_write(struct mii_phy *phy, int reg, int val)
 {
-	u16 val;
+	phy->mdio_write(phy->dev, phy->address, reg, val);
+}
+
+int mii_reset_phy(struct mii_phy *phy)
+{
+	int val;
 	int limit = 10000;
 
-	val = __phy_read(phy, phy_id, MII_BMCR);
+	val = phy_read(phy, MII_BMCR);
 	val &= ~BMCR_ISOLATE;
 	val |= BMCR_RESET;
-	__phy_write(phy, phy_id, MII_BMCR, val);
+	phy_write(phy, MII_BMCR, val);
 
-	udelay(100);
+	udelay(300);
 
 	while (limit--) {
-		val = __phy_read(phy, phy_id, MII_BMCR);
-		if ((val & BMCR_RESET) == 0)
+		val = phy_read(phy, MII_BMCR);
+		if (val >= 0 && (val & BMCR_RESET) == 0)
 			break;
 		udelay(10);
 	}
 	if ((val & BMCR_ISOLATE) && limit > 0)
-		__phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE);
-
-	return (limit <= 0);
-}
-
-static int cis8201_init(struct mii_phy *phy)
-{
-	u16 epcr;
-
-	epcr = phy_read(phy, MII_CIS8201_EPCR);
-	epcr &= ~EPCR_MODE_MASK;
-
-	switch (phy->mode) {
-	case PHY_MODE_TBI:
-		epcr |= EPCR_TBI_MODE;
-		break;
-	case PHY_MODE_RTBI:
-		epcr |= EPCR_RTBI_MODE;
-		break;
-	case PHY_MODE_GMII:
-		epcr |= EPCR_GMII_MODE;
-		break;
-	case PHY_MODE_RGMII:
-	default:
-		epcr |= EPCR_RGMII_MODE;
-	}
+		phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
 
-	phy_write(phy, MII_CIS8201_EPCR, epcr);
-
-	return 0;
+	return limit <= 0;
 }
 
 static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
 {
-	u16 ctl, adv;
+	int ctl, adv;
 
-	phy->autoneg = 1;
+	phy->autoneg = AUTONEG_ENABLE;
 	phy->speed = SPEED_10;
 	phy->duplex = DUPLEX_HALF;
-	phy->pause = 0;
+	phy->pause = phy->asym_pause = 0;
 	phy->advertising = advertise;
 
 	/* Setup standard advertise */
 	adv = phy_read(phy, MII_ADVERTISE);
-	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
+	if (adv < 0)
+		return adv;
+	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
+		 ADVERTISE_PAUSE_ASYM);
 	if (advertise & ADVERTISED_10baseT_Half)
 		adv |= ADVERTISE_10HALF;
 	if (advertise & ADVERTISED_10baseT_Full)
@@ -99,8 +83,25 @@ static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
 		adv |= ADVERTISE_100HALF;
 	if (advertise & ADVERTISED_100baseT_Full)
 		adv |= ADVERTISE_100FULL;
+	if (advertise & ADVERTISED_Pause)
+		adv |= ADVERTISE_PAUSE_CAP;
+	if (advertise & ADVERTISED_Asym_Pause)
+		adv |= ADVERTISE_PAUSE_ASYM;
 	phy_write(phy, MII_ADVERTISE, adv);
 
+	if (phy->features &
+	    (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
+		adv = phy_read(phy, MII_CTRL1000);
+		if (adv < 0)
+			return adv;
+		adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+		if (advertise & ADVERTISED_1000baseT_Full)
+			adv |= ADVERTISE_1000FULL;
+		if (advertise & ADVERTISED_1000baseT_Half)
+			adv |= ADVERTISE_1000HALF;
+		phy_write(phy, MII_CTRL1000, adv);
+	}
+
 	/* Start/Restart aneg */
 	ctl = phy_read(phy, MII_BMCR);
 	ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
@@ -111,14 +112,16 @@ static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
 
 static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
 {
-	u16 ctl;
+	int ctl;
 
-	phy->autoneg = 0;
+	phy->autoneg = AUTONEG_DISABLE;
 	phy->speed = speed;
 	phy->duplex = fd;
-	phy->pause = 0;
+	phy->pause = phy->asym_pause = 0;
 
 	ctl = phy_read(phy, MII_BMCR);
+	if (ctl < 0)
+		return ctl;
 	ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE);
 
 	/* First reset the PHY */
@@ -132,6 +135,8 @@ static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
 		ctl |= BMCR_SPEED100;
 		break;
 	case SPEED_1000:
+		ctl |= BMCR_SPEED1000;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -144,112 +149,143 @@ static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
 
 static int genmii_poll_link(struct mii_phy *phy)
 {
-	u16 status;
+	int status;
 
-	(void)phy_read(phy, MII_BMSR);
+	/* Clear latched value with dummy read */
+	phy_read(phy, MII_BMSR);
 	status = phy_read(phy, MII_BMSR);
-	if ((status & BMSR_LSTATUS) == 0)
+	if (status < 0 || (status & BMSR_LSTATUS) == 0)
 		return 0;
-	if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE))
+	if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE))
 		return 0;
 	return 1;
 }
 
-#define	MII_CIS8201_ACSR	0x1c
-#define  ACSR_DUPLEX_STATUS	0x0020
-#define  ACSR_SPEED_1000BASET	0x0010
-#define  ACSR_SPEED_100BASET	0x0008
-
-static int cis8201_read_link(struct mii_phy *phy)
+static int genmii_read_link(struct mii_phy *phy)
 {
-	u16 acsr;
+	if (phy->autoneg == AUTONEG_ENABLE) {
+		int glpa = 0;
+		int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
+		if (lpa < 0)
+			return lpa;
+
+		if (phy->features &
+		    (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
+			int adv = phy_read(phy, MII_CTRL1000);
+			glpa = phy_read(phy, MII_STAT1000);
+
+			if (glpa < 0 || adv < 0)
+				return adv;
+
+			glpa &= adv << 2;
+		}
+
+		phy->speed = SPEED_10;
+		phy->duplex = DUPLEX_HALF;
+		phy->pause = phy->asym_pause = 0;
+
+		if (glpa & (LPA_1000FULL | LPA_1000HALF)) {
+			phy->speed = SPEED_1000;
+			if (glpa & LPA_1000FULL)
+				phy->duplex = DUPLEX_FULL;
+		} else if (lpa & (LPA_100FULL | LPA_100HALF)) {
+			phy->speed = SPEED_100;
+			if (lpa & LPA_100FULL)
+				phy->duplex = DUPLEX_FULL;
+		} else if (lpa & LPA_10FULL)
+			phy->duplex = DUPLEX_FULL;
 
-	if (phy->autoneg) {
-		acsr = phy_read(phy, MII_CIS8201_ACSR);
+		if (phy->duplex == DUPLEX_FULL) {
+			phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+			phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+		}
+	} else {
+		int bmcr = phy_read(phy, MII_BMCR);
+		if (bmcr < 0)
+			return bmcr;
 
-		if (acsr & ACSR_DUPLEX_STATUS)
+		if (bmcr & BMCR_FULLDPLX)
 			phy->duplex = DUPLEX_FULL;
 		else
 			phy->duplex = DUPLEX_HALF;
-		if (acsr & ACSR_SPEED_1000BASET) {
+		if (bmcr & BMCR_SPEED1000)
 			phy->speed = SPEED_1000;
-		} else if (acsr & ACSR_SPEED_100BASET)
+		else if (bmcr & BMCR_SPEED100)
 			phy->speed = SPEED_100;
 		else
 			phy->speed = SPEED_10;
-		phy->pause = 0;
-	}
-	/* On non-aneg, we assume what we put in BMCR is the speed,
-	 * though magic-aneg shouldn't prevent this case from occurring
-	 */
 
+		phy->pause = phy->asym_pause = 0;
+	}
 	return 0;
 }
 
-static int genmii_read_link(struct mii_phy *phy)
+/* Generic implementation for most 10/100/1000 PHYs */
+static struct mii_phy_ops generic_phy_ops = {
+	.setup_aneg	= genmii_setup_aneg,
+	.setup_forced	= genmii_setup_forced,
+	.poll_link	= genmii_poll_link,
+	.read_link	= genmii_read_link
+};
+
+static struct mii_phy_def genmii_phy_def = {
+	.phy_id		= 0x00000000,
+	.phy_id_mask	= 0x00000000,
+	.name		= "Generic MII",
+	.ops		= &generic_phy_ops
+};
+
+/* CIS8201 */
+#define MII_CIS8201_EPCR	0x17
+#define  EPCR_MODE_MASK		0x3000
+#define  EPCR_GMII_MODE		0x0000
+#define  EPCR_RGMII_MODE	0x1000
+#define  EPCR_TBI_MODE		0x2000
+#define  EPCR_RTBI_MODE		0x3000
+
+static int cis8201_init(struct mii_phy *phy)
 {
-	u16 lpa;
+	int epcr;
 
-	if (phy->autoneg) {
-		lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
+	epcr = phy_read(phy, MII_CIS8201_EPCR);
+	if (epcr < 0)
+		return epcr;
 
-		phy->speed = SPEED_10;
-		phy->duplex = DUPLEX_HALF;
-		phy->pause = 0;
+	epcr &= ~EPCR_MODE_MASK;
 
-		if (lpa & (LPA_100FULL | LPA_100HALF)) {
-			phy->speed = SPEED_100;
-			if (lpa & LPA_100FULL)
-				phy->duplex = DUPLEX_FULL;
-		} else if (lpa & LPA_10FULL)
-			phy->duplex = DUPLEX_FULL;
+	switch (phy->mode) {
+	case PHY_MODE_TBI:
+		epcr |= EPCR_TBI_MODE;
+		break;
+	case PHY_MODE_RTBI:
+		epcr |= EPCR_RTBI_MODE;
+		break;
+	case PHY_MODE_GMII:
+		epcr |= EPCR_GMII_MODE;
+		break;
+	case PHY_MODE_RGMII:
+	default:
+		epcr |= EPCR_RGMII_MODE;
 	}
-	/* On non-aneg, we assume what we put in BMCR is the speed,
-	 * though magic-aneg shouldn't prevent this case from occurring
-	 */
+
+	phy_write(phy, MII_CIS8201_EPCR, epcr);
 
 	return 0;
 }
 
-#define MII_BASIC_FEATURES	(SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
-				 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
-				 SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII)
-#define MII_GBIT_FEATURES	(MII_BASIC_FEATURES | \
-				 SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
-
-/* CIS8201 phy ops */
 static struct mii_phy_ops cis8201_phy_ops = {
-	init:cis8201_init,
-	setup_aneg:genmii_setup_aneg,
-	setup_forced:genmii_setup_forced,
-	poll_link:genmii_poll_link,
-	read_link:cis8201_read_link
-};
-
-/* Generic implementation for most 10/100 PHYs */
-static struct mii_phy_ops generic_phy_ops = {
-	setup_aneg:genmii_setup_aneg,
-	setup_forced:genmii_setup_forced,
-	poll_link:genmii_poll_link,
-	read_link:genmii_read_link
+	.init		= cis8201_init,
+	.setup_aneg	= genmii_setup_aneg,
+	.setup_forced	= genmii_setup_forced,
+	.poll_link	= genmii_poll_link,
+	.read_link	= genmii_read_link
 };
 
 static struct mii_phy_def cis8201_phy_def = {
-	phy_id:0x000fc410,
-	phy_id_mask:0x000ffff0,
-	name:"CIS8201 Gigabit Ethernet",
-	features:MII_GBIT_FEATURES,
-	magic_aneg:0,
-	ops:&cis8201_phy_ops
-};
-
-static struct mii_phy_def genmii_phy_def = {
-	phy_id:0x00000000,
-	phy_id_mask:0x00000000,
-	name:"Generic MII",
-	features:MII_BASIC_FEATURES,
-	magic_aneg:0,
-	ops:&generic_phy_ops
+	.phy_id		= 0x000fc410,
+	.phy_id_mask	= 0x000ffff0,
+	.name		= "CIS8201 Gigabit Ethernet",
+	.ops		= &cis8201_phy_ops
 };
 
 static struct mii_phy_def *mii_phy_table[] = {
@@ -258,39 +294,60 @@ static struct mii_phy_def *mii_phy_table[] = {
 	NULL
 };
 
-int mii_phy_probe(struct mii_phy *phy, int mii_id)
+int mii_phy_probe(struct mii_phy *phy, int address)
 {
-	int rc;
-	u32 id;
 	struct mii_phy_def *def;
 	int i;
+	u32 id;
 
-	phy->autoneg = 0;
+	phy->autoneg = AUTONEG_DISABLE;
 	phy->advertising = 0;
-	phy->mii_id = mii_id;
-	phy->speed = 0;
-	phy->duplex = 0;
-	phy->pause = 0;
-
-	/* Take PHY out of isloate mode and reset it. */
-	rc = reset_one_mii_phy(phy, mii_id);
-	if (rc)
+	phy->address = address;
+	phy->speed = SPEED_10;
+	phy->duplex = DUPLEX_HALF;
+	phy->pause = phy->asym_pause = 0;
+
+	/* Take PHY out of isolate mode and reset it. */
+	if (mii_reset_phy(phy))
 		return -ENODEV;
 
 	/* Read ID and find matching entry */
-	id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2))
-	    & 0xfffffff0;
+	id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2);
 	for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
 		if ((id & def->phy_id_mask) == def->phy_id)
 			break;
 	/* Should never be NULL (we have a generic entry), but... */
-	if (def == NULL)
+	if (!def)
 		return -ENODEV;
 
 	phy->def = def;
 
+	/* Determine PHY features if needed */
+	phy->features = def->features;
+	if (!phy->features) {
+		u16 bmsr = phy_read(phy, MII_BMSR);
+		if (bmsr & BMSR_ANEGCAPABLE)
+			phy->features |= SUPPORTED_Autoneg;
+		if (bmsr & BMSR_10HALF)
+			phy->features |= SUPPORTED_10baseT_Half;
+		if (bmsr & BMSR_10FULL)
+			phy->features |= SUPPORTED_10baseT_Full;
+		if (bmsr & BMSR_100HALF)
+			phy->features |= SUPPORTED_100baseT_Half;
+		if (bmsr & BMSR_100FULL)
+			phy->features |= SUPPORTED_100baseT_Full;
+		if (bmsr & BMSR_ESTATEN) {
+			u16 esr = phy_read(phy, MII_ESTATUS);
+			if (esr & ESTATUS_1000_TFULL)
+				phy->features |= SUPPORTED_1000baseT_Full;
+			if (esr & ESTATUS_1000_THALF)
+				phy->features |= SUPPORTED_1000baseT_Half;
+		}
+		phy->features |= SUPPORTED_MII;
+	}
+
 	/* Setup default advertising */
-	phy->advertising = def->features;
+	phy->advertising = phy->features;
 
 	return 0;
 }
diff --git a/drivers/net/ibm_emac/ibm_emac_phy.h b/drivers/net/ibm_emac/ibm_emac_phy.h
index 61afbea9656..a70e0fea54c 100644
--- a/drivers/net/ibm_emac/ibm_emac_phy.h
+++ b/drivers/net/ibm_emac/ibm_emac_phy.h
@@ -1,65 +1,25 @@
-
 /*
- * ibm_emac_phy.h
- *
+ * drivers/net/ibm_emac/ibm_emac_phy.h
  *
- *      Benjamin Herrenschmidt <benh@kernel.crashing.org>
- *      February 2003
+ * Driver for PowerPC 4xx on-chip ethernet controller, PHY support
  *
- * This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * February 2003
  *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR   IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT,  INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
+ * Minor additions by Eugene Surovegin <ebs@ebshome.net>, 2004
  *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  *
  * This file basically duplicates sungem_phy.{c,h} with different PHYs
  * supported. I'm looking into merging that in a single mii layer more
  * flexible than mii.c 
  */
 
-#ifndef _IBM_EMAC_PHY_H_
-#define _IBM_EMAC_PHY_H_
-
-/*
- * PHY mode settings
- * Used for multi-mode capable PHYs
- */
-#define PHY_MODE_NA	0
-#define PHY_MODE_MII	1
-#define PHY_MODE_RMII	2
-#define PHY_MODE_SMII	3
-#define PHY_MODE_RGMII	4
-#define PHY_MODE_TBI	5
-#define PHY_MODE_GMII	6
-#define PHY_MODE_RTBI	7
-#define PHY_MODE_SGMII	8
-
-/*
- * PHY specific registers/values
- */
-
-/* CIS8201 */
-#define MII_CIS8201_EPCR	0x17
-#define EPCR_MODE_MASK		0x3000
-#define EPCR_GMII_MODE		0x0000
-#define EPCR_RGMII_MODE		0x1000
-#define EPCR_TBI_MODE		0x2000
-#define EPCR_RTBI_MODE		0x3000
+#ifndef _IBM_OCP_PHY_H_
+#define _IBM_OCP_PHY_H_
 
 struct mii_phy;
 
@@ -77,7 +37,8 @@ struct mii_phy_ops {
 struct mii_phy_def {
 	u32 phy_id;		/* Concatenated ID1 << 16 | ID2 */
 	u32 phy_id_mask;	/* Significant bits */
-	u32 features;		/* Ethtool SUPPORTED_* defines */
+	u32 features;		/* Ethtool SUPPORTED_* defines or 
+				   0 for autodetect */
 	int magic_aneg;		/* Autoneg does all speed test for us */
 	const char *name;
 	const struct mii_phy_ops *ops;
@@ -86,8 +47,11 @@ struct mii_phy_def {
 /* An instance of a PHY, partially borrowed from mii_if_info */
 struct mii_phy {
 	struct mii_phy_def *def;
-	int advertising;
-	int mii_id;
+	u32 advertising;	/* Ethtool ADVERTISED_* defines */
+	u32 features;		/* Copied from mii_phy_def.features 
+				   or determined automaticaly */
+	int address;		/* PHY address */
+	int mode;		/* PHY mode */
 
 	/* 1: autoneg enabled, 0: disabled */
 	int autoneg;
@@ -98,40 +62,19 @@ struct mii_phy {
 	int speed;
 	int duplex;
 	int pause;
-
-	/* PHY mode - if needed */
-	int mode;
+	int asym_pause;
 
 	/* Provided by host chip */
 	struct net_device *dev;
-	int (*mdio_read) (struct net_device * dev, int mii_id, int reg);
-	void (*mdio_write) (struct net_device * dev, int mii_id, int reg,
+	int (*mdio_read) (struct net_device * dev, int addr, int reg);
+	void (*mdio_write) (struct net_device * dev, int addr, int reg,
 			    int val);
 };
 
 /* Pass in a struct mii_phy with dev, mdio_read and mdio_write
  * filled, the remaining fields will be filled on return
  */
-extern int mii_phy_probe(struct mii_phy *phy, int mii_id);
-
-static inline int __phy_read(struct mii_phy *phy, int id, int reg)
-{
-	return phy->mdio_read(phy->dev, id, reg);
-}
-
-static inline void __phy_write(struct mii_phy *phy, int id, int reg, int val)
-{
-	phy->mdio_write(phy->dev, id, reg, val);
-}
-
-static inline int phy_read(struct mii_phy *phy, int reg)
-{
-	return phy->mdio_read(phy->dev, phy->mii_id, reg);
-}
-
-static inline void phy_write(struct mii_phy *phy, int reg, int val)
-{
-	phy->mdio_write(phy->dev, phy->mii_id, reg, val);
-}
+int mii_phy_probe(struct mii_phy *phy, int address);
+int mii_reset_phy(struct mii_phy *phy);
 
-#endif				/* _IBM_EMAC_PHY_H_ */
+#endif				/* _IBM_OCP_PHY_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.c b/drivers/net/ibm_emac/ibm_emac_rgmii.c
new file mode 100644
index 00000000000..f0b1ffb2dbb
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_rgmii.c
@@ -0,0 +1,201 @@
+/*
+ * drivers/net/ibm_emac/ibm_emac_rgmii.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ * 	Matt Porter <mporter@kernel.crashing.org>
+ * 	Copyright 2004 MontaVista Software, Inc.
+ * 
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/ethtool.h>
+#include <asm/io.h>
+
+#include "ibm_emac_core.h"
+#include "ibm_emac_debug.h"
+
+/* RGMIIx_FER */
+#define RGMII_FER_MASK(idx)	(0x7 << ((idx) * 4))
+#define RGMII_FER_RTBI(idx)	(0x4 << ((idx) * 4))
+#define RGMII_FER_RGMII(idx)	(0x5 << ((idx) * 4))
+#define RGMII_FER_TBI(idx)	(0x6 << ((idx) * 4))
+#define RGMII_FER_GMII(idx)	(0x7 << ((idx) * 4))
+
+/* RGMIIx_SSR */
+#define RGMII_SSR_MASK(idx)	(0x7 << ((idx) * 8))
+#define RGMII_SSR_100(idx)	(0x2 << ((idx) * 8))
+#define RGMII_SSR_1000(idx)	(0x4 << ((idx) * 8))
+
+/* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */
+static inline int rgmii_valid_mode(int phy_mode)
+{
+	return  phy_mode == PHY_MODE_GMII ||
+		phy_mode == PHY_MODE_RGMII ||
+		phy_mode == PHY_MODE_TBI ||
+		phy_mode == PHY_MODE_RTBI;
+}
+
+static inline const char *rgmii_mode_name(int mode)
+{
+	switch (mode) {
+	case PHY_MODE_RGMII:
+		return "RGMII";
+	case PHY_MODE_TBI:
+		return "TBI";
+	case PHY_MODE_GMII:
+		return "GMII";
+	case PHY_MODE_RTBI:
+		return "RTBI";
+	default:
+		BUG();
+	}
+}
+
+static inline u32 rgmii_mode_mask(int mode, int input)
+{
+	switch (mode) {
+	case PHY_MODE_RGMII:
+		return RGMII_FER_RGMII(input);
+	case PHY_MODE_TBI:
+		return RGMII_FER_TBI(input);
+	case PHY_MODE_GMII:
+		return RGMII_FER_GMII(input);
+	case PHY_MODE_RTBI:
+		return RGMII_FER_RTBI(input);
+	default:
+		BUG();
+	}
+}
+
+static int __init rgmii_init(struct ocp_device *ocpdev, int input, int mode)
+{
+	struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+	struct rgmii_regs *p;
+
+	RGMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, mode);
+
+	if (!dev) {
+		dev = kzalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL);
+		if (!dev) {
+			printk(KERN_ERR
+			       "rgmii%d: couldn't allocate device structure!\n",
+			       ocpdev->def->index);
+			return -ENOMEM;
+		}
+
+		p = (struct rgmii_regs *)ioremap(ocpdev->def->paddr,
+						 sizeof(struct rgmii_regs));
+		if (!p) {
+			printk(KERN_ERR
+			       "rgmii%d: could not ioremap device registers!\n",
+			       ocpdev->def->index);
+			kfree(dev);
+			return -ENOMEM;
+		}
+
+		dev->base = p;
+		ocp_set_drvdata(ocpdev, dev);
+
+		/* Disable all inputs by default */
+		out_be32(&p->fer, 0);
+	} else
+		p = dev->base;
+
+	/* Enable this input */
+	out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input));
+
+	printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n",
+	       ocpdev->def->index, input, rgmii_mode_name(mode));
+
+	++dev->users;
+	return 0;
+}
+
+int __init rgmii_attach(void *emac)
+{
+	struct ocp_enet_private *dev = emac;
+	struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+	/* Check if we need to attach to a RGMII */
+	if (emacdata->rgmii_idx >= 0 && rgmii_valid_mode(emacdata->phy_mode)) {
+		dev->rgmii_input = emacdata->rgmii_mux;
+		dev->rgmii_dev =
+		    ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_RGMII,
+				    emacdata->rgmii_idx);
+		if (!dev->rgmii_dev) {
+			printk(KERN_ERR "emac%d: unknown rgmii%d!\n",
+			       dev->def->index, emacdata->rgmii_idx);
+			return -ENODEV;
+		}
+		if (rgmii_init
+		    (dev->rgmii_dev, dev->rgmii_input, emacdata->phy_mode)) {
+			printk(KERN_ERR
+			       "emac%d: rgmii%d initialization failed!\n",
+			       dev->def->index, emacdata->rgmii_idx);
+			return -ENODEV;
+		}
+	}
+	return 0;
+}
+
+void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
+{
+	struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+	u32 ssr = in_be32(&dev->base->ssr) & ~RGMII_SSR_MASK(input);
+
+	RGMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
+
+	if (speed == SPEED_1000)
+		ssr |= RGMII_SSR_1000(input);
+	else if (speed == SPEED_100)
+		ssr |= RGMII_SSR_100(input);
+
+	out_be32(&dev->base->ssr, ssr);
+}
+
+void __exit __rgmii_fini(struct ocp_device *ocpdev, int input)
+{
+	struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+	BUG_ON(!dev || dev->users == 0);
+
+	RGMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
+
+	/* Disable this input */
+	out_be32(&dev->base->fer,
+		 in_be32(&dev->base->fer) & ~RGMII_FER_MASK(input));
+
+	if (!--dev->users) {
+		/* Free everything if this is the last user */
+		ocp_set_drvdata(ocpdev, NULL);
+		iounmap((void *)dev->base);
+		kfree(dev);
+	}
+}
+
+int __rgmii_get_regs_len(struct ocp_device *ocpdev)
+{
+	return sizeof(struct emac_ethtool_regs_subhdr) +
+	    sizeof(struct rgmii_regs);
+}
+
+void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf)
+{
+	struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+	struct emac_ethtool_regs_subhdr *hdr = buf;
+	struct rgmii_regs *regs = (struct rgmii_regs *)(hdr + 1);
+
+	hdr->version = 0;
+	hdr->index = ocpdev->def->index;
+	memcpy_fromio(regs, dev->base, sizeof(struct rgmii_regs));
+	return regs + 1;
+}
diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.h b/drivers/net/ibm_emac/ibm_emac_rgmii.h
index 49f188f4ea6..a1ffb8a44ff 100644
--- a/drivers/net/ibm_emac/ibm_emac_rgmii.h
+++ b/drivers/net/ibm_emac/ibm_emac_rgmii.h
@@ -1,5 +1,7 @@
 /*
- * Defines for the IBM RGMII bridge
+ * drivers/net/ibm_emac/ibm_emac_rgmii.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
  *
  * Based on ocp_zmii.h/ibm_emac_zmii.h
  * Armin Kuster akuster@mvista.com
@@ -7,6 +9,9 @@
  * Copyright 2004 MontaVista Software, Inc.
  * Matt Porter <mporter@kernel.crashing.org>
  *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
@@ -19,47 +24,42 @@
 #include <linux/config.h>
 
 /* RGMII bridge */
-typedef struct rgmii_regs {
+struct rgmii_regs {
 	u32 fer;		/* Function enable register */
 	u32 ssr;		/* Speed select register */
-} rgmii_t;
-
-#define RGMII_INPUTS			4
+};
 
 /* RGMII device */
 struct ibm_ocp_rgmii {
 	struct rgmii_regs *base;
-	int mode[RGMII_INPUTS];
 	int users;		/* number of EMACs using this RGMII bridge */
 };
 
-/* Fuctional Enable Reg */
-#define RGMII_FER_MASK(x)		(0x00000007 << (4*x))
-#define RGMII_RTBI			0x00000004
-#define RGMII_RGMII			0x00000005
-#define RGMII_TBI  			0x00000006
-#define RGMII_GMII 			0x00000007
-
-/* Speed Selection reg */
+#ifdef CONFIG_IBM_EMAC_RGMII
+int rgmii_attach(void *emac) __init;
 
-#define RGMII_SP2_100	0x00000002
-#define RGMII_SP2_1000	0x00000004
-#define RGMII_SP3_100	0x00000200
-#define RGMII_SP3_1000	0x00000400
+void __rgmii_fini(struct ocp_device *ocpdev, int input) __exit;
+static inline void rgmii_fini(struct ocp_device *ocpdev, int input)
+{
+	if (ocpdev)
+		__rgmii_fini(ocpdev, input);
+}
 
-#define RGMII_MII2_SPDMASK	 0x00000007
-#define RGMII_MII3_SPDMASK	 0x00000700
+void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed);
 
-#define RGMII_MII2_100MB	 RGMII_SP2_100 & ~RGMII_SP2_1000
-#define RGMII_MII2_1000MB 	 RGMII_SP2_1000 & ~RGMII_SP2_100
-#define RGMII_MII2_10MB		 ~(RGMII_SP2_100 | RGMII_SP2_1000)
-#define RGMII_MII3_100MB	 RGMII_SP3_100 & ~RGMII_SP3_1000
-#define RGMII_MII3_1000MB 	 RGMII_SP3_1000 & ~RGMII_SP3_100
-#define RGMII_MII3_10MB		 ~(RGMII_SP3_100 | RGMII_SP3_1000)
+int __rgmii_get_regs_len(struct ocp_device *ocpdev);
+static inline int rgmii_get_regs_len(struct ocp_device *ocpdev)
+{
+	return ocpdev ? __rgmii_get_regs_len(ocpdev) : 0;
+}
 
-#define RTBI		0
-#define RGMII		1
-#define TBI		2
-#define GMII		3
+void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf);
+#else
+# define rgmii_attach(x)	0
+# define rgmii_fini(x,y)	((void)0)
+# define rgmii_set_speed(x,y,z)	((void)0)
+# define rgmii_get_regs_len(x)	0
+# define rgmii_dump_regs(x,buf)	(buf)
+#endif				/* !CONFIG_IBM_EMAC_RGMII */
 
 #endif				/* _IBM_EMAC_RGMII_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_tah.c b/drivers/net/ibm_emac/ibm_emac_tah.c
new file mode 100644
index 00000000000..af08afc22f9
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_tah.c
@@ -0,0 +1,111 @@
+/*
+ * drivers/net/ibm_emac/ibm_emac_tah.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
+ *
+ * Copyright 2004 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <asm/io.h>
+
+#include "ibm_emac_core.h"
+
+static int __init tah_init(struct ocp_device *ocpdev)
+{
+	struct tah_regs *p;
+
+	if (ocp_get_drvdata(ocpdev)) {
+		printk(KERN_ERR "tah%d: already in use!\n", ocpdev->def->index);
+		return -EBUSY;
+	}
+
+	/* Initialize TAH and enable IPv4 checksum verification, no TSO yet */
+	p = (struct tah_regs *)ioremap(ocpdev->def->paddr, sizeof(*p));
+	if (!p) {
+		printk(KERN_ERR "tah%d: could not ioremap device registers!\n",
+		       ocpdev->def->index);
+		return -ENOMEM;
+	}
+	ocp_set_drvdata(ocpdev, p);
+	__tah_reset(ocpdev);
+
+	return 0;
+}
+
+int __init tah_attach(void *emac)
+{
+	struct ocp_enet_private *dev = emac;
+	struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+	/* Check if we need to attach to a TAH */
+	if (emacdata->tah_idx >= 0) {
+		dev->tah_dev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH,
+					       emacdata->tah_idx);
+		if (!dev->tah_dev) {
+			printk(KERN_ERR "emac%d: unknown tah%d!\n",
+			       dev->def->index, emacdata->tah_idx);
+			return -ENODEV;
+		}
+		if (tah_init(dev->tah_dev)) {
+			printk(KERN_ERR
+			       "emac%d: tah%d initialization failed!\n",
+			       dev->def->index, emacdata->tah_idx);
+			return -ENODEV;
+		}
+	}
+	return 0;
+}
+
+void __exit __tah_fini(struct ocp_device *ocpdev)
+{
+	struct tah_regs *p = ocp_get_drvdata(ocpdev);
+	BUG_ON(!p);
+	ocp_set_drvdata(ocpdev, NULL);
+	iounmap((void *)p);
+}
+
+void __tah_reset(struct ocp_device *ocpdev)
+{
+	struct tah_regs *p = ocp_get_drvdata(ocpdev);
+	int n;
+
+	/* Reset TAH */
+	out_be32(&p->mr, TAH_MR_SR);
+	n = 100;
+	while ((in_be32(&p->mr) & TAH_MR_SR) && n)
+		--n;
+
+	if (unlikely(!n))
+		printk(KERN_ERR "tah%d: reset timeout\n", ocpdev->def->index);
+
+	/* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
+	out_be32(&p->mr,
+		 TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
+		 TAH_MR_DIG);
+}
+
+int __tah_get_regs_len(struct ocp_device *ocpdev)
+{
+	return sizeof(struct emac_ethtool_regs_subhdr) +
+	    sizeof(struct tah_regs);
+}
+
+void *tah_dump_regs(struct ocp_device *ocpdev, void *buf)
+{
+	struct tah_regs *dev = ocp_get_drvdata(ocpdev);
+	struct emac_ethtool_regs_subhdr *hdr = buf;
+	struct tah_regs *regs = (struct tah_regs *)(hdr + 1);
+
+	hdr->version = 0;
+	hdr->index = ocpdev->def->index;
+	memcpy_fromio(regs, dev, sizeof(struct tah_regs));
+	return regs + 1;
+}
diff --git a/drivers/net/ibm_emac/ibm_emac_tah.h b/drivers/net/ibm_emac/ibm_emac_tah.h
index ecfc6980552..9299b5dd7eb 100644
--- a/drivers/net/ibm_emac/ibm_emac_tah.h
+++ b/drivers/net/ibm_emac/ibm_emac_tah.h
@@ -1,9 +1,13 @@
 /*
- * Defines for the IBM TAH
+ * drivers/net/ibm_emac/ibm_emac_tah.h
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
  *
  * Copyright 2004 MontaVista Software, Inc.
  * Matt Porter <mporter@kernel.crashing.org>
  *
+ * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
+ *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
@@ -13,36 +17,72 @@
 #ifndef _IBM_EMAC_TAH_H
 #define _IBM_EMAC_TAH_H
 
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ocp.h>
+
 /* TAH */
-typedef struct tah_regs {
-	u32 tah_revid;
+struct tah_regs {
+	u32 revid;
 	u32 pad[3];
-	u32 tah_mr;
-	u32 tah_ssr0;
-	u32 tah_ssr1;
-	u32 tah_ssr2;
-	u32 tah_ssr3;
-	u32 tah_ssr4;
-	u32 tah_ssr5;
-	u32 tah_tsr;
-} tah_t;
+	u32 mr;
+	u32 ssr0;
+	u32 ssr1;
+	u32 ssr2;
+	u32 ssr3;
+	u32 ssr4;
+	u32 ssr5;
+	u32 tsr;
+};
 
 /* TAH engine */
-#define TAH_MR_CVR			0x80000000
-#define TAH_MR_SR			0x40000000
-#define TAH_MR_ST_256			0x01000000
-#define TAH_MR_ST_512			0x02000000
-#define TAH_MR_ST_768			0x03000000
-#define TAH_MR_ST_1024			0x04000000
-#define TAH_MR_ST_1280			0x05000000
-#define TAH_MR_ST_1536			0x06000000
-#define TAH_MR_TFS_16KB			0x00000000
-#define TAH_MR_TFS_2KB			0x00200000
-#define TAH_MR_TFS_4KB			0x00400000
-#define TAH_MR_TFS_6KB			0x00600000
-#define TAH_MR_TFS_8KB			0x00800000
-#define TAH_MR_TFS_10KB			0x00a00000
-#define TAH_MR_DTFP			0x00100000
-#define TAH_MR_DIG			0x00080000
+#define TAH_MR_CVR		0x80000000
+#define TAH_MR_SR		0x40000000
+#define TAH_MR_ST_256		0x01000000
+#define TAH_MR_ST_512		0x02000000
+#define TAH_MR_ST_768		0x03000000
+#define TAH_MR_ST_1024		0x04000000
+#define TAH_MR_ST_1280		0x05000000
+#define TAH_MR_ST_1536		0x06000000
+#define TAH_MR_TFS_16KB		0x00000000
+#define TAH_MR_TFS_2KB		0x00200000
+#define TAH_MR_TFS_4KB		0x00400000
+#define TAH_MR_TFS_6KB		0x00600000
+#define TAH_MR_TFS_8KB		0x00800000
+#define TAH_MR_TFS_10KB		0x00a00000
+#define TAH_MR_DTFP		0x00100000
+#define TAH_MR_DIG		0x00080000
+
+#ifdef CONFIG_IBM_EMAC_TAH
+int tah_attach(void *emac) __init;
+
+void __tah_fini(struct ocp_device *ocpdev) __exit;
+static inline void tah_fini(struct ocp_device *ocpdev)
+{
+	if (ocpdev)
+		__tah_fini(ocpdev);
+}
+
+void __tah_reset(struct ocp_device *ocpdev);
+static inline void tah_reset(struct ocp_device *ocpdev)
+{
+	if (ocpdev)
+		__tah_reset(ocpdev);
+}
+
+int __tah_get_regs_len(struct ocp_device *ocpdev);
+static inline int tah_get_regs_len(struct ocp_device *ocpdev)
+{
+	return ocpdev ? __tah_get_regs_len(ocpdev) : 0;
+}
+
+void *tah_dump_regs(struct ocp_device *ocpdev, void *buf);
+#else
+# define tah_attach(x)		0
+# define tah_fini(x)		((void)0)
+# define tah_reset(x)		((void)0)
+# define tah_get_regs_len(x)	0
+# define tah_dump_regs(x,buf)	(buf)
+#endif				/* !CONFIG_IBM_EMAC_TAH */
 
 #endif				/* _IBM_EMAC_TAH_H */
diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.c b/drivers/net/ibm_emac/ibm_emac_zmii.c
new file mode 100644
index 00000000000..35c1185079e
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_zmii.c
@@ -0,0 +1,255 @@
+/*
+ * drivers/net/ibm_emac/ibm_emac_zmii.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ *      Armin Kuster <akuster@mvista.com>
+ * 	Copyright 2001 MontaVista Softare Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/ethtool.h>
+#include <asm/io.h>
+
+#include "ibm_emac_core.h"
+#include "ibm_emac_debug.h"
+
+/* ZMIIx_FER */
+#define ZMII_FER_MDI(idx)	(0x80000000 >> ((idx) * 4))
+#define ZMII_FER_MDI_ALL	(ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \
+				 ZMII_FER_MDI(2) | ZMII_FER_MDI(3))
+
+#define ZMII_FER_SMII(idx)	(0x40000000 >> ((idx) * 4))
+#define ZMII_FER_RMII(idx)	(0x20000000 >> ((idx) * 4))
+#define ZMII_FER_MII(idx)	(0x10000000 >> ((idx) * 4))
+
+/* ZMIIx_SSR */
+#define ZMII_SSR_SCI(idx)	(0x40000000 >> ((idx) * 4))
+#define ZMII_SSR_FSS(idx)	(0x20000000 >> ((idx) * 4))
+#define ZMII_SSR_SP(idx)	(0x10000000 >> ((idx) * 4))
+
+/* ZMII only supports MII, RMII and SMII 
+ * we also support autodetection for backward compatibility
+ */
+static inline int zmii_valid_mode(int mode)
+{
+	return  mode == PHY_MODE_MII ||
+		mode == PHY_MODE_RMII ||
+		mode == PHY_MODE_SMII ||
+		mode == PHY_MODE_NA;
+}
+
+static inline const char *zmii_mode_name(int mode)
+{
+	switch (mode) {
+	case PHY_MODE_MII:
+		return "MII";
+	case PHY_MODE_RMII:
+		return "RMII";
+	case PHY_MODE_SMII:
+		return "SMII";
+	default:
+		BUG();
+	}
+}
+
+static inline u32 zmii_mode_mask(int mode, int input)
+{
+	switch (mode) {
+	case PHY_MODE_MII:
+		return ZMII_FER_MII(input);
+	case PHY_MODE_RMII:
+		return ZMII_FER_RMII(input);
+	case PHY_MODE_SMII:
+		return ZMII_FER_SMII(input);
+	default:
+		return 0;
+	}
+}
+
+static int __init zmii_init(struct ocp_device *ocpdev, int input, int *mode)
+{
+	struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+	struct zmii_regs *p;
+
+	ZMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, *mode);
+
+	if (!dev) {
+		dev = kzalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
+		if (!dev) {
+			printk(KERN_ERR
+			       "zmii%d: couldn't allocate device structure!\n",
+			       ocpdev->def->index);
+			return -ENOMEM;
+		}
+		dev->mode = PHY_MODE_NA;
+
+		p = (struct zmii_regs *)ioremap(ocpdev->def->paddr,
+						sizeof(struct zmii_regs));
+		if (!p) {
+			printk(KERN_ERR
+			       "zmii%d: could not ioremap device registers!\n",
+			       ocpdev->def->index);
+			kfree(dev);
+			return -ENOMEM;
+		}
+		dev->base = p;
+		ocp_set_drvdata(ocpdev, dev);
+		
+		/* We may need FER value for autodetection later */
+		dev->fer_save = in_be32(&p->fer);
+
+		/* Disable all inputs by default */
+		out_be32(&p->fer, 0);
+	} else
+		p = dev->base;
+
+	if (!zmii_valid_mode(*mode)) {
+		/* Probably an EMAC connected to RGMII, 
+		 * but it still may need ZMII for MDIO 
+		 */
+		goto out;
+	}
+
+	/* Autodetect ZMII mode if not specified.
+	 * This is only for backward compatibility with the old driver.
+	 * Please, always specify PHY mode in your board port to avoid
+	 * any surprises.
+	 */
+	if (dev->mode == PHY_MODE_NA) {
+		if (*mode == PHY_MODE_NA) {
+			u32 r = dev->fer_save;
+
+			ZMII_DBG("%d: autodetecting mode, FER = 0x%08x" NL,
+				 ocpdev->def->index, r);
+			
+			if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1)))
+				dev->mode = PHY_MODE_MII;
+			else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1)))
+				dev->mode = PHY_MODE_RMII;
+			else
+				dev->mode = PHY_MODE_SMII;
+		} else
+			dev->mode = *mode;
+
+		printk(KERN_NOTICE "zmii%d: bridge in %s mode\n",
+		       ocpdev->def->index, zmii_mode_name(dev->mode));
+	} else {
+		/* All inputs must use the same mode */
+		if (*mode != PHY_MODE_NA && *mode != dev->mode) {
+			printk(KERN_ERR
+			       "zmii%d: invalid mode %d specified for input %d\n",
+			       ocpdev->def->index, *mode, input);
+			return -EINVAL;
+		}
+	}
+
+	/* Report back correct PHY mode, 
+	 * it may be used during PHY initialization.
+	 */
+	*mode = dev->mode;
+
+	/* Enable this input */
+	out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input));
+      out:
+	++dev->users;
+	return 0;
+}
+
+int __init zmii_attach(void *emac)
+{
+	struct ocp_enet_private *dev = emac;
+	struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+	if (emacdata->zmii_idx >= 0) {
+		dev->zmii_input = emacdata->zmii_mux;
+		dev->zmii_dev =
+		    ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII,
+				    emacdata->zmii_idx);
+		if (!dev->zmii_dev) {
+			printk(KERN_ERR "emac%d: unknown zmii%d!\n",
+			       dev->def->index, emacdata->zmii_idx);
+			return -ENODEV;
+		}
+		if (zmii_init
+		    (dev->zmii_dev, dev->zmii_input, &emacdata->phy_mode)) {
+			printk(KERN_ERR
+			       "emac%d: zmii%d initialization failed!\n",
+			       dev->def->index, emacdata->zmii_idx);
+			return -ENODEV;
+		}
+	}
+	return 0;
+}
+
+void __zmii_enable_mdio(struct ocp_device *ocpdev, int input)
+{
+	struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+	u32 fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL;
+
+	ZMII_DBG2("%d: mdio(%d)" NL, ocpdev->def->index, input);
+
+	out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input));
+}
+
+void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
+{
+	struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+	u32 ssr = in_be32(&dev->base->ssr);
+
+	ZMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
+
+	if (speed == SPEED_100)
+		ssr |= ZMII_SSR_SP(input);
+	else
+		ssr &= ~ZMII_SSR_SP(input);
+
+	out_be32(&dev->base->ssr, ssr);
+}
+
+void __exit __zmii_fini(struct ocp_device *ocpdev, int input)
+{
+	struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+	BUG_ON(!dev || dev->users == 0);
+
+	ZMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
+
+	/* Disable this input */
+	out_be32(&dev->base->fer,
+		 in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input));
+
+	if (!--dev->users) {
+		/* Free everything if this is the last user */
+		ocp_set_drvdata(ocpdev, NULL);
+		iounmap((void *)dev->base);
+		kfree(dev);
+	}
+}
+
+int __zmii_get_regs_len(struct ocp_device *ocpdev)
+{
+	return sizeof(struct emac_ethtool_regs_subhdr) +
+	    sizeof(struct zmii_regs);
+}
+
+void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf)
+{
+	struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+	struct emac_ethtool_regs_subhdr *hdr = buf;
+	struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1);
+
+	hdr->version = 0;
+	hdr->index = ocpdev->def->index;
+	memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs));
+	return regs + 1;
+}
diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.h b/drivers/net/ibm_emac/ibm_emac_zmii.h
index 6f6cd2a39e3..0bb26062c0a 100644
--- a/drivers/net/ibm_emac/ibm_emac_zmii.h
+++ b/drivers/net/ibm_emac/ibm_emac_zmii.h
@@ -1,23 +1,27 @@
 /*
- * ocp_zmii.h
+ * drivers/net/ibm_emac/ibm_emac_zmii.h
  *
- * Defines for the IBM ZMII bridge
+ * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
  *
- *      Armin Kuster akuster@mvista.com
- *      Dec, 2001
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
  *
- * Copyright 2001 MontaVista Softare Inc.
+ * Based on original work by
+ *      Armin Kuster <akuster@mvista.com>
+ * 	Copyright 2001 MontaVista Softare Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
+ *
  */
-
 #ifndef _IBM_EMAC_ZMII_H_
 #define _IBM_EMAC_ZMII_H_
 
 #include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ocp.h>
 
 /* ZMII bridge registers */
 struct zmii_regs {
@@ -26,68 +30,54 @@ struct zmii_regs {
 	u32 smiirs;		/* SMII status reg */
 };
 
-#define ZMII_INPUTS	4
-
 /* ZMII device */
 struct ibm_ocp_zmii {
 	struct zmii_regs *base;
-	int mode[ZMII_INPUTS];
+	int mode;		/* subset of PHY_MODE_XXXX */
 	int users;		/* number of EMACs using this ZMII bridge */
+	u32 fer_save;		/* FER value left by firmware */
 };
 
-/* Fuctional Enable Reg */
-
-#define ZMII_FER_MASK(x)	(0xf0000000 >> (4*x))
-
-#define ZMII_MDI0	0x80000000
-#define ZMII_SMII0	0x40000000
-#define ZMII_RMII0	0x20000000
-#define ZMII_MII0	0x10000000
-#define ZMII_MDI1	0x08000000
-#define ZMII_SMII1	0x04000000
-#define ZMII_RMII1	0x02000000
-#define ZMII_MII1	0x01000000
-#define ZMII_MDI2	0x00800000
-#define ZMII_SMII2	0x00400000
-#define ZMII_RMII2	0x00200000
-#define ZMII_MII2	0x00100000
-#define ZMII_MDI3	0x00080000
-#define ZMII_SMII3	0x00040000
-#define ZMII_RMII3	0x00020000
-#define ZMII_MII3	0x00010000
+#ifdef CONFIG_IBM_EMAC_ZMII
+int zmii_attach(void *emac) __init;
 
-/* Speed Selection reg */
+void __zmii_fini(struct ocp_device *ocpdev, int input) __exit;
+static inline void zmii_fini(struct ocp_device *ocpdev, int input)
+{
+	if (ocpdev)
+		__zmii_fini(ocpdev, input);
+}
 
-#define ZMII_SCI0	0x40000000
-#define ZMII_FSS0	0x20000000
-#define ZMII_SP0	0x10000000
-#define ZMII_SCI1	0x04000000
-#define ZMII_FSS1	0x02000000
-#define ZMII_SP1	0x01000000
-#define ZMII_SCI2	0x00400000
-#define ZMII_FSS2	0x00200000
-#define ZMII_SP2	0x00100000
-#define ZMII_SCI3	0x00040000
-#define ZMII_FSS3	0x00020000
-#define ZMII_SP3	0x00010000
+void __zmii_enable_mdio(struct ocp_device *ocpdev, int input);
+static inline void zmii_enable_mdio(struct ocp_device *ocpdev, int input)
+{
+	if (ocpdev)
+		__zmii_enable_mdio(ocpdev, input);
+}
 
-#define ZMII_MII0_100MB	ZMII_SP0
-#define ZMII_MII0_10MB	~ZMII_SP0
-#define ZMII_MII1_100MB	ZMII_SP1
-#define ZMII_MII1_10MB	~ZMII_SP1
-#define ZMII_MII2_100MB	ZMII_SP2
-#define ZMII_MII2_10MB	~ZMII_SP2
-#define ZMII_MII3_100MB	ZMII_SP3
-#define ZMII_MII3_10MB	~ZMII_SP3
+void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed);
+static inline void zmii_set_speed(struct ocp_device *ocpdev, int input,
+				  int speed)
+{
+	if (ocpdev)
+		__zmii_set_speed(ocpdev, input, speed);
+}
 
-/* SMII Status reg */
+int __zmii_get_regs_len(struct ocp_device *ocpdev);
+static inline int zmii_get_regs_len(struct ocp_device *ocpdev)
+{
+	return ocpdev ? __zmii_get_regs_len(ocpdev) : 0;
+}
 
-#define ZMII_STS0 0xFF000000	/* EMAC0 smii status mask */
-#define ZMII_STS1 0x00FF0000	/* EMAC1 smii status mask */
+void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf);
 
-#define SMII	0
-#define RMII	1
-#define MII	2
-#define MDI	3
+#else
+# define zmii_attach(x)		0
+# define zmii_fini(x,y)		((void)0)
+# define zmii_enable_mdio(x,y)	((void)0)
+# define zmii_set_speed(x,y,z)	((void)0)
+# define zmii_get_regs_len(x)	0
+# define zmii_dump_regs(x,buf)	(buf)
+#endif				/* !CONFIG_IBM_EMAC_ZMII */
 
 #endif				/* _IBM_EMAC_ZMII_H_ */