Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:
 "Noteworthy changes this time around:

   1) Multicast rejoin support for team driver, from Jiri Pirko.

   2) Centralize and simplify TCP RTT measurement handling in order to
      reduce the impact of bad RTO seeding from SYN/ACKs.  Also, when
      both timestamps and local RTT measurements are available prefer
      the later because there are broken middleware devices which
      scramble the timestamp.

      From Yuchung Cheng.

   3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel
      memory consumed to queue up unsend user data.  From Eric Dumazet.

   4) Add a "physical port ID" abstraction for network devices, from
      Jiri Pirko.

   5) Add a "suppress" operation to influence fib_rules lookups, from
      Stefan Tomanek.

   6) Add a networking development FAQ, from Paul Gortmaker.

   7) Extend the information provided by tcp_probe and add ipv6 support,
      from Daniel Borkmann.

   8) Use RCU locking more extensively in openvswitch data paths, from
      Pravin B Shelar.

   9) Add SCTP support to openvswitch, from Joe Stringer.

  10) Add EF10 chip support to SFC driver, from Ben Hutchings.

  11) Add new SYNPROXY netfilter target, from Patrick McHardy.

  12) Compute a rate approximation for sending in TCP sockets, and use
      this to more intelligently coalesce TSO frames.  Furthermore, add
      a new packet scheduler which takes advantage of this estimate when
      available.  From Eric Dumazet.

  13) Allow AF_PACKET fanouts with random selection, from Daniel
      Borkmann.

  14) Add ipv6 support to vxlan driver, from Cong Wang"

Resolved conflicts as per discussion.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits)
  openvswitch: Fix alignment of struct sw_flow_key.
  netfilter: Fix build errors with xt_socket.c
  tcp: Add missing braces to do_tcp_setsockopt
  caif: Add missing braces to multiline if in cfctrl_linkup_request
  bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize
  vxlan: Fix kernel panic on device delete.
  net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls
  net: mvneta: properly disable HW PHY polling and ensure adjust_link() works
  icplus: Use netif_running to determine device state
  ethernet/arc/arc_emac: Fix huge delays in large file copies
  tuntap: orphan frags before trying to set tx timestamp
  tuntap: purge socket error queue on detach
  qlcnic: use standard NAPI weights
  ipv6:introduce function to find route for redirect
  bnx2x: VF RSS support - VF side
  bnx2x: VF RSS support - PF side
  vxlan: Notify drivers for listening UDP port changes
  net: usbnet: update addr_assign_type if appropriate
  driver/net: enic: update enic maintainers and driver
  driver/net: enic: Exposing symbols for Cisco's low latency driver
  ...

1 files changed, 43 insertions, 90 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 24e2e7aafda..0e1b973659b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -311,9 +311,6 @@ static int ixgbe_set_settings(struct net_device *netdev,
 		 * this function does not support duplex forcing, but can
 		 * limit the advertising of the adapter to the specified speed
 		 */
-		if (ecmd->autoneg == AUTONEG_DISABLE)
-			return -EINVAL;
-
 		if (ecmd->advertising & ~ecmd->supported)
 			return -EINVAL;
 
@@ -355,10 +352,11 @@ static void ixgbe_get_pauseparam(struct net_device *netdev,
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
 
-	if (hw->fc.disable_fc_autoneg)
-		pause->autoneg = 0;
-	else
+	if (ixgbe_device_supports_autoneg_fc(hw) &&
+	    !hw->fc.disable_fc_autoneg)
 		pause->autoneg = 1;
+	else
+		pause->autoneg = 0;
 
 	if (hw->fc.current_mode == ixgbe_fc_rx_pause) {
 		pause->rx_pause = 1;
@@ -384,7 +382,7 @@ static int ixgbe_set_pauseparam(struct net_device *netdev,
 
 	/* some devices do not support autoneg of link flow control */
 	if ((pause->autoneg == AUTONEG_ENABLE) &&
-	    (ixgbe_device_supports_autoneg_fc(hw) != 0))
+	    !ixgbe_device_supports_autoneg_fc(hw))
 		return -EINVAL;
 
 	fc.disable_fc_autoneg = (pause->autoneg != AUTONEG_ENABLE);
@@ -1048,7 +1046,7 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev,
 		data[i] = (ixgbe_gstrings_stats[i].sizeof_stat ==
 		           sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
 	}
-	for (j = 0; j < IXGBE_NUM_RX_QUEUES; j++) {
+	for (j = 0; j < netdev->num_tx_queues; j++) {
 		ring = adapter->tx_ring[j];
 		if (!ring) {
 			data[i] = 0;
@@ -1140,11 +1138,11 @@ static void ixgbe_get_strings(struct net_device *netdev, u32 stringset,
 			sprintf(p, "tx_queue_%u_bytes", i);
 			p += ETH_GSTRING_LEN;
 #ifdef LL_EXTENDED_STATS
-			sprintf(p, "tx_q_%u_napi_yield", i);
+			sprintf(p, "tx_queue_%u_ll_napi_yield", i);
 			p += ETH_GSTRING_LEN;
-			sprintf(p, "tx_q_%u_misses", i);
+			sprintf(p, "tx_queue_%u_ll_misses", i);
 			p += ETH_GSTRING_LEN;
-			sprintf(p, "tx_q_%u_cleaned", i);
+			sprintf(p, "tx_queue_%u_ll_cleaned", i);
 			p += ETH_GSTRING_LEN;
 #endif /* LL_EXTENDED_STATS */
 		}
@@ -1154,11 +1152,11 @@ static void ixgbe_get_strings(struct net_device *netdev, u32 stringset,
 			sprintf(p, "rx_queue_%u_bytes", i);
 			p += ETH_GSTRING_LEN;
 #ifdef LL_EXTENDED_STATS
-			sprintf(p, "rx_q_%u_ll_poll_yield", i);
+			sprintf(p, "rx_queue_%u_ll_poll_yield", i);
 			p += ETH_GSTRING_LEN;
-			sprintf(p, "rx_q_%u_misses", i);
+			sprintf(p, "rx_queue_%u_ll_misses", i);
 			p += ETH_GSTRING_LEN;
-			sprintf(p, "rx_q_%u_cleaned", i);
+			sprintf(p, "rx_queue_%u_ll_cleaned", i);
 			p += ETH_GSTRING_LEN;
 #endif /* LL_EXTENDED_STATS */
 		}
@@ -1884,11 +1882,12 @@ static void ixgbe_diag_test(struct net_device *netdev,
                             struct ethtool_test *eth_test, u64 *data)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
-	struct ixgbe_hw *hw = &adapter->hw;
 	bool if_running = netif_running(netdev);
 
 	set_bit(__IXGBE_TESTING, &adapter->state);
 	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+		struct ixgbe_hw *hw = &adapter->hw;
+
 		if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
 			int i;
 			for (i = 0; i < adapter->num_vfs; i++) {
@@ -1912,21 +1911,18 @@ static void ixgbe_diag_test(struct net_device *netdev,
 		/* Offline tests */
 		e_info(hw, "offline testing starting\n");
 
-		if (if_running)
-			/* indicate we're in test mode */
-			dev_close(netdev);
-
-		/* bringing adapter down disables SFP+ optics */
-		if (hw->mac.ops.enable_tx_laser)
-			hw->mac.ops.enable_tx_laser(hw);
-
 		/* Link test performed before hardware reset so autoneg doesn't
 		 * interfere with test result
 		 */
 		if (ixgbe_link_test(adapter, &data[4]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
-		ixgbe_reset(adapter);
+		if (if_running)
+			/* indicate we're in test mode */
+			dev_close(netdev);
+		else
+			ixgbe_reset(adapter);
+
 		e_info(hw, "register testing starting\n");
 		if (ixgbe_reg_test(adapter, &data[0]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1963,13 +1959,11 @@ skip_loopback:
 		clear_bit(__IXGBE_TESTING, &adapter->state);
 		if (if_running)
 			dev_open(netdev);
+		else if (hw->mac.ops.disable_tx_laser)
+			hw->mac.ops.disable_tx_laser(hw);
 	} else {
 		e_info(hw, "online testing starting\n");
 
-		/* if adapter is down, SFP+ optics will be disabled */
-		if (!if_running && hw->mac.ops.enable_tx_laser)
-			hw->mac.ops.enable_tx_laser(hw);
-
 		/* Online tests */
 		if (ixgbe_link_test(adapter, &data[4]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1983,9 +1977,6 @@ skip_loopback:
 		clear_bit(__IXGBE_TESTING, &adapter->state);
 	}
 
-	/* if adapter was down, ensure SFP+ optics are disabled again */
-	if (!if_running && hw->mac.ops.disable_tx_laser)
-		hw->mac.ops.disable_tx_laser(hw);
 skip_ol_tests:
 	msleep_interruptible(4 * 1000);
 }
@@ -2909,33 +2900,21 @@ static int ixgbe_get_module_info(struct net_device *dev,
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 status;
 	u8 sff8472_rev, addr_mode;
-	int ret_val = 0;
 	bool page_swap = false;
 
-	/* avoid concurent i2c reads */
-	while (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
-		msleep(100);
-
-	/* used by the service task */
-	set_bit(__IXGBE_READ_I2C, &adapter->state);
-
 	/* Check whether we support SFF-8472 or not */
 	status = hw->phy.ops.read_i2c_eeprom(hw,
 					     IXGBE_SFF_SFF_8472_COMP,
 					     &sff8472_rev);
-	if (status != 0) {
-		ret_val = -EIO;
-		goto err_out;
-	}
+	if (status != 0)
+		return -EIO;
 
 	/* addressing mode is not supported */
 	status = hw->phy.ops.read_i2c_eeprom(hw,
 					     IXGBE_SFF_SFF_8472_SWAP,
 					     &addr_mode);
-	if (status != 0) {
-		ret_val = -EIO;
-		goto err_out;
-	}
+	if (status != 0)
+		return -EIO;
 
 	if (addr_mode & IXGBE_SFF_ADDRESSING_MODE) {
 		e_err(drv, "Address change required to access page 0xA2, but not supported. Please report the module type to the driver maintainers.\n");
@@ -2952,9 +2931,7 @@ static int ixgbe_get_module_info(struct net_device *dev,
 		modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
 	}
 
-err_out:
-	clear_bit(__IXGBE_READ_I2C, &adapter->state);
-	return ret_val;
+	return 0;
 }
 
 static int ixgbe_get_module_eeprom(struct net_device *dev,
@@ -2966,51 +2943,27 @@ static int ixgbe_get_module_eeprom(struct net_device *dev,
 	u32 status = IXGBE_ERR_PHY_ADDR_INVALID;
 	u8 databyte = 0xFF;
 	int i = 0;
-	int ret_val = 0;
 
-	/* ixgbe_get_module_info is called before this function in all
-	 * cases, so we do not need any checks we already do above,
-	 * and can trust ee->len to be a known value.
-	 */
+	if (ee->len == 0)
+		return -EINVAL;
 
-	while (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
-		msleep(100);
-	set_bit(__IXGBE_READ_I2C, &adapter->state);
-
-	/* Read the first block, SFF-8079 */
-	for (i = 0; i < ETH_MODULE_SFF_8079_LEN; i++) {
-		status = hw->phy.ops.read_i2c_eeprom(hw, i, &databyte);
-		if (status != 0) {
-			/* Error occured while reading module */
-			ret_val = -EIO;
-			goto err_out;
-		}
-		data[i] = databyte;
-	}
+	for (i = ee->offset; i < ee->offset + ee->len; i++) {
+		/* I2C reads can take long time */
+		if (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+			return -EBUSY;
 
-	/* If the second block is requested, check if SFF-8472 is supported. */
-	if (ee->len == ETH_MODULE_SFF_8472_LEN) {
-		if (data[IXGBE_SFF_SFF_8472_COMP] == IXGBE_SFF_SFF_8472_UNSUP)
-			return -EOPNOTSUPP;
-
-		/* Read the second block, SFF-8472 */
-		for (i = ETH_MODULE_SFF_8079_LEN;
-		     i < ETH_MODULE_SFF_8472_LEN; i++) {
-			status = hw->phy.ops.read_i2c_sff8472(hw,
-				i - ETH_MODULE_SFF_8079_LEN, &databyte);
-			if (status != 0) {
-				/* Error occured while reading module */
-				ret_val = -EIO;
-				goto err_out;
-			}
-			data[i] = databyte;
-		}
-	}
+		if (i < ETH_MODULE_SFF_8079_LEN)
+			status = hw->phy.ops.read_i2c_eeprom(hw, i, &databyte);
+		else
+			status = hw->phy.ops.read_i2c_sff8472(hw, i, &databyte);
 
-err_out:
-	clear_bit(__IXGBE_READ_I2C, &adapter->state);
+		if (status != 0)
+			return -EIO;
 
-	return ret_val;
+		data[i - ee->offset] = databyte;
+	}
+
+	return 0;
 }
 
 static const struct ethtool_ops ixgbe_ethtool_ops = {