Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking update from David Miller:

 1) Checkpoint/restarted TCP sockets now can properly propagate the TCP
    timestamp offset.  From Andrey Vagin.

 2) VMWARE VM VSOCK layer, from Andy King.

 3) Much improved support for virtual functions and SR-IOV in bnx2x,
    from Ariel ELior.

 4) All protocols on ipv4 and ipv6 are now network namespace aware, and
    all the compatability checks for initial-namespace-only protocols is
    removed.  Thanks to Tom Parkin for helping deal with the last major
    holdout, L2TP.

 5) IPV6 support in netpoll and network namespace support in pktgen,
    from Cong Wang.

 6) Multiple Registration Protocol (MRP) and Multiple VLAN Registration
    Protocol (MVRP) support, from David Ward.

 7) Compute packet lengths more accurately in the packet scheduler, from
    Eric Dumazet.

 8) Use per-task page fragment allocator in skb_append_datato_frags(),
    also from Eric Dumazet.

 9) Add support for connection tracking labels in netfilter, from
    Florian Westphal.

10) Fix default multicast group joining on ipv6, and add anti-spoofing
    checks to 6to4 and 6rd.  From Hannes Frederic Sowa.

11) Make ipv4/ipv6 fragmentation memory limits more reasonable in modern
    times, rearrange inet frag datastructures for better cacheline
    locality, and move more operations outside of locking.  From Jesper
    Dangaard Brouer.

12) Instead of strict master <--> slave relationships, allow arbitrary
    scenerios with "upper device lists".  From Jiri Pirko.

13) Improve rate limiting accuracy in TBF and act_police, also from Jiri
    Pirko.

14) Add a BPF filter netfilter match target, from Willem de Bruijn.

15) Orphan and delete a bunch of pre-historic networking drivers from
    Paul Gortmaker.

16) Add TSO support for GRE tunnels, from Pravin B SHelar.  Although
    this still needs some minor bug fixing before it's %100 correct in
    all cases.

17) Handle unresolved IPSEC states like ARP, with a resolution packet
    queue.  From Steffen Klassert.

18) Remove TCP Appropriate Byte Count support (ABC), from Stephen
    Hemminger.  This was long overdue.

19) Support SO_REUSEPORT, from Tom Herbert.

20) Allow locking a socket BPF filter, so that it cannot change after a
    process drops capabilities.

21) Add VLAN filtering to bridge, from Vlad Yasevich.

22) Bring ipv6 on-par with ipv4 and do not cache neighbour entries in
    the ipv6 routes, from YOSHIFUJI Hideaki.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1538 commits)
  ipv6: fix race condition regarding dst->expires and dst->from.
  net: fix a wrong assignment in skb_split()
  ip_gre: remove an extra dst_release()
  ppp: set qdisc_tx_busylock to avoid LOCKDEP splat
  atl1c: restore buffer state
  net: fix a build failure when !CONFIG_PROC_FS
  net: ipv4: fix waring -Wunused-variable
  net: proc: fix build failed when procfs is not configured
  Revert "xen: netback: remove redundant xenvif_put"
  net: move procfs code to net/core/net-procfs.c
  qmi_wwan, cdc-ether: add ADU960S
  bonding: set sysfs device_type to 'bond'
  bonding: fix bond_release_all inconsistencies
  b44: use netdev_alloc_skb_ip_align()
  xen: netback: remove redundant xenvif_put
  net: fec: Do a sanity check on the gpio number
  ip_gre: propogate target device GSO capability to the tunnel device
  ip_gre: allow CSUM capable devices to handle packets
  bonding: Fix initialize after use for 3ad machine state spinlock
  bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate()
  ...

1 files changed, 577 insertions, 122 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 643c883dd79..a177b8b65c4 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2012 Intel Corporation.
+  Copyright(c) 1999 - 2013 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -42,7 +42,6 @@
 #include <linux/slab.h>
 #include <net/checksum.h>
 #include <net/ip6_checksum.h>
-#include <linux/mii.h>
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
 #include <linux/cpu.h>
@@ -56,7 +55,7 @@
 
 #define DRV_EXTRAVERSION "-k"
 
-#define DRV_VERSION "2.1.4" DRV_EXTRAVERSION
+#define DRV_VERSION "2.2.14" DRV_EXTRAVERSION
 char e1000e_driver_name[] = "e1000e";
 const char e1000e_driver_version[] = DRV_VERSION;
 
@@ -87,20 +86,7 @@ struct e1000_reg_info {
 	char *name;
 };
 
-#define E1000_RDFH	0x02410	/* Rx Data FIFO Head - RW */
-#define E1000_RDFT	0x02418	/* Rx Data FIFO Tail - RW */
-#define E1000_RDFHS	0x02420	/* Rx Data FIFO Head Saved - RW */
-#define E1000_RDFTS	0x02428	/* Rx Data FIFO Tail Saved - RW */
-#define E1000_RDFPC	0x02430	/* Rx Data FIFO Packet Count - RW */
-
-#define E1000_TDFH	0x03410	/* Tx Data FIFO Head - RW */
-#define E1000_TDFT	0x03418	/* Tx Data FIFO Tail - RW */
-#define E1000_TDFHS	0x03420	/* Tx Data FIFO Head Saved - RW */
-#define E1000_TDFTS	0x03428	/* Tx Data FIFO Tail Saved - RW */
-#define E1000_TDFPC	0x03430	/* Tx Data FIFO Packet Count - RW */
-
 static const struct e1000_reg_info e1000_reg_info_tbl[] = {
-
 	/* General Registers */
 	{E1000_CTRL, "CTRL"},
 	{E1000_STATUS, "STATUS"},
@@ -488,20 +474,87 @@ static int e1000_desc_unused(struct e1000_ring *ring)
 }
 
 /**
+ * e1000e_systim_to_hwtstamp - convert system time value to hw time stamp
+ * @adapter: board private structure
+ * @hwtstamps: time stamp structure to update
+ * @systim: unsigned 64bit system time value.
+ *
+ * Convert the system time value stored in the RX/TXSTMP registers into a
+ * hwtstamp which can be used by the upper level time stamping functions.
+ *
+ * The 'systim_lock' spinlock is used to protect the consistency of the
+ * system time value. This is needed because reading the 64 bit time
+ * value involves reading two 32 bit registers. The first read latches the
+ * value.
+ **/
+static void e1000e_systim_to_hwtstamp(struct e1000_adapter *adapter,
+				      struct skb_shared_hwtstamps *hwtstamps,
+				      u64 systim)
+{
+	u64 ns;
+	unsigned long flags;
+
+	spin_lock_irqsave(&adapter->systim_lock, flags);
+	ns = timecounter_cyc2time(&adapter->tc, systim);
+	spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
+	memset(hwtstamps, 0, sizeof(*hwtstamps));
+	hwtstamps->hwtstamp = ns_to_ktime(ns);
+}
+
+/**
+ * e1000e_rx_hwtstamp - utility function which checks for Rx time stamp
+ * @adapter: board private structure
+ * @status: descriptor extended error and status field
+ * @skb: particular skb to include time stamp
+ *
+ * If the time stamp is valid, convert it into the timecounter ns value
+ * and store that result into the shhwtstamps structure which is passed
+ * up the network stack.
+ **/
+static void e1000e_rx_hwtstamp(struct e1000_adapter *adapter, u32 status,
+			       struct sk_buff *skb)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u64 rxstmp;
+
+	if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP) ||
+	    !(status & E1000_RXDEXT_STATERR_TST) ||
+	    !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID))
+		return;
+
+	/* The Rx time stamp registers contain the time stamp.  No other
+	 * received packet will be time stamped until the Rx time stamp
+	 * registers are read.  Because only one packet can be time stamped
+	 * at a time, the register values must belong to this packet and
+	 * therefore none of the other additional attributes need to be
+	 * compared.
+	 */
+	rxstmp = (u64)er32(RXSTMPL);
+	rxstmp |= (u64)er32(RXSTMPH) << 32;
+	e1000e_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), rxstmp);
+
+	adapter->flags2 &= ~FLAG2_CHECK_RX_HWTSTAMP;
+}
+
+/**
  * e1000_receive_skb - helper function to handle Rx indications
  * @adapter: board private structure
- * @status: descriptor status field as written by hardware
+ * @staterr: descriptor extended error and status field as written by hardware
  * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
  * @skb: pointer to sk_buff to be indicated to stack
  **/
 static void e1000_receive_skb(struct e1000_adapter *adapter,
 			      struct net_device *netdev, struct sk_buff *skb,
-			      u8 status, __le16 vlan)
+			      u32 staterr, __le16 vlan)
 {
 	u16 tag = le16_to_cpu(vlan);
+
+	e1000e_rx_hwtstamp(adapter, staterr, skb);
+
 	skb->protocol = eth_type_trans(skb, netdev);
 
-	if (status & E1000_RXD_STAT_VP)
+	if (staterr & E1000_RXD_STAT_VP)
 		__vlan_hwaccel_put_tag(skb, tag);
 
 	napi_gro_receive(&adapter->napi, skb);
@@ -765,7 +818,7 @@ static void e1000_alloc_jumbo_rx_buffers(struct e1000_ring *rx_ring,
 	struct e1000_buffer *buffer_info;
 	struct sk_buff *skb;
 	unsigned int i;
-	unsigned int bufsz = 256 - 16 /* for skb_reserve */;
+	unsigned int bufsz = 256 - 16;	/* for skb_reserve */
 
 	i = rx_ring->next_to_use;
 	buffer_info = &rx_ring->buffer_info[i];
@@ -1050,9 +1103,9 @@ static void e1000_print_hw_hang(struct work_struct *work)
 	adapter->tx_hang_recheck = false;
 	netif_stop_queue(netdev);
 
-	e1e_rphy(hw, PHY_STATUS, &phy_status);
-	e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status);
-	e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status);
+	e1e_rphy(hw, MII_BMSR, &phy_status);
+	e1e_rphy(hw, MII_STAT1000, &phy_1000t_status);
+	e1e_rphy(hw, MII_ESTATUS, &phy_ext_status);
 
 	pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status);
 
@@ -1092,6 +1145,41 @@ static void e1000_print_hw_hang(struct work_struct *work)
 }
 
 /**
+ * e1000e_tx_hwtstamp_work - check for Tx time stamp
+ * @work: pointer to work struct
+ *
+ * This work function polls the TSYNCTXCTL valid bit to determine when a
+ * timestamp has been taken for the current stored skb.  The timestamp must
+ * be for this skb because only one such packet is allowed in the queue.
+ */
+static void e1000e_tx_hwtstamp_work(struct work_struct *work)
+{
+	struct e1000_adapter *adapter = container_of(work, struct e1000_adapter,
+						     tx_hwtstamp_work);
+	struct e1000_hw *hw = &adapter->hw;
+
+	if (!adapter->tx_hwtstamp_skb)
+		return;
+
+	if (er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID) {
+		struct skb_shared_hwtstamps shhwtstamps;
+		u64 txstmp;
+
+		txstmp = er32(TXSTMPL);
+		txstmp |= (u64)er32(TXSTMPH) << 32;
+
+		e1000e_systim_to_hwtstamp(adapter, &shhwtstamps, txstmp);
+
+		skb_tstamp_tx(adapter->tx_hwtstamp_skb, &shhwtstamps);
+		dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
+		adapter->tx_hwtstamp_skb = NULL;
+	} else {
+		/* reschedule to check later */
+		schedule_work(&adapter->tx_hwtstamp_work);
+	}
+}
+
+/**
  * e1000_clean_tx_irq - Reclaim resources after transmit completes
  * @tx_ring: Tx descriptor ring
  *
@@ -1345,8 +1433,8 @@ copydone:
 			   cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
 			adapter->rx_hdr_split++;
 
-		e1000_receive_skb(adapter, netdev, skb,
-				  staterr, rx_desc->wb.middle.vlan);
+		e1000_receive_skb(adapter, netdev, skb, staterr,
+				  rx_desc->wb.middle.vlan);
 
 next_desc:
 		rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
@@ -1645,7 +1733,7 @@ static void e1000e_downshift_workaround(struct work_struct *work)
  * @irq: interrupt number
  * @data: pointer to a network interface device structure
  **/
-static irqreturn_t e1000_intr_msi(int irq, void *data)
+static irqreturn_t e1000_intr_msi(int __always_unused irq, void *data)
 {
 	struct net_device *netdev = data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -1671,7 +1759,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
 			/* disable receives */
 			u32 rctl = er32(RCTL);
 			ew32(RCTL, rctl & ~E1000_RCTL_EN);
-			adapter->flags |= FLAG_RX_RESTART_NOW;
+			adapter->flags |= FLAG_RESTART_NOW;
 		}
 		/* guard against interrupt when we're going down */
 		if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -1711,7 +1799,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
  * @irq: interrupt number
  * @data: pointer to a network interface device structure
  **/
-static irqreturn_t e1000_intr(int irq, void *data)
+static irqreturn_t e1000_intr(int __always_unused irq, void *data)
 {
 	struct net_device *netdev = data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -1751,7 +1839,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
 			/* disable receives */
 			rctl = er32(RCTL);
 			ew32(RCTL, rctl & ~E1000_RCTL_EN);
-			adapter->flags |= FLAG_RX_RESTART_NOW;
+			adapter->flags |= FLAG_RESTART_NOW;
 		}
 		/* guard against interrupt when we're going down */
 		if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -1786,7 +1874,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t e1000_msix_other(int irq, void *data)
+static irqreturn_t e1000_msix_other(int __always_unused irq, void *data)
 {
 	struct net_device *netdev = data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -1818,8 +1906,7 @@ no_link_interrupt:
 	return IRQ_HANDLED;
 }
 
-
-static irqreturn_t e1000_intr_msix_tx(int irq, void *data)
+static irqreturn_t e1000_intr_msix_tx(int __always_unused irq, void *data)
 {
 	struct net_device *netdev = data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -1837,7 +1924,7 @@ static irqreturn_t e1000_intr_msix_tx(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t e1000_intr_msix_rx(int irq, void *data)
+static irqreturn_t e1000_intr_msix_rx(int __always_unused irq, void *data)
 {
 	struct net_device *netdev = data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -1924,7 +2011,6 @@ static void e1000_configure_msix(struct e1000_adapter *adapter)
 	ctrl_ext |= E1000_CTRL_EXT_PBA_CLR;
 
 	/* Auto-Mask Other interrupts upon ICR read */
-#define E1000_EIAC_MASK_82574   0x01F00000
 	ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER);
 	ctrl_ext |= E1000_CTRL_EXT_EIAME;
 	ew32(CTRL_EXT, ctrl_ext);
@@ -2394,9 +2480,7 @@ void e1000e_free_rx_resources(struct e1000_ring *rx_ring)
  *      while increasing bulk throughput.  This functionality is controlled
  *      by the InterruptThrottleRate module parameter.
  **/
-static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
-				     u16 itr_setting, int packets,
-				     int bytes)
+static unsigned int e1000_update_itr(u16 itr_setting, int packets, int bytes)
 {
 	unsigned int retval = itr_setting;
 
@@ -2441,7 +2525,6 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
 
 static void e1000_set_itr(struct e1000_adapter *adapter)
 {
-	struct e1000_hw *hw = &adapter->hw;
 	u16 current_itr;
 	u32 new_itr = adapter->itr;
 
@@ -2457,18 +2540,16 @@ static void e1000_set_itr(struct e1000_adapter *adapter)
 		goto set_itr_now;
 	}
 
-	adapter->tx_itr = e1000_update_itr(adapter,
-				    adapter->tx_itr,
-				    adapter->total_tx_packets,
-				    adapter->total_tx_bytes);
+	adapter->tx_itr = e1000_update_itr(adapter->tx_itr,
+					   adapter->total_tx_packets,
+					   adapter->total_tx_bytes);
 	/* conservative mode (itr 3) eliminates the lowest_latency setting */
 	if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
 		adapter->tx_itr = low_latency;
 
-	adapter->rx_itr = e1000_update_itr(adapter,
-				    adapter->rx_itr,
-				    adapter->total_rx_packets,
-				    adapter->total_rx_bytes);
+	adapter->rx_itr = e1000_update_itr(adapter->rx_itr,
+					   adapter->total_rx_packets,
+					   adapter->total_rx_bytes);
 	/* conservative mode (itr 3) eliminates the lowest_latency setting */
 	if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
 		adapter->rx_itr = low_latency;
@@ -2504,10 +2585,7 @@ set_itr_now:
 		if (adapter->msix_entries)
 			adapter->rx_ring->set_itr = 1;
 		else
-			if (new_itr)
-				ew32(ITR, 1000000000 / (new_itr * 256));
-			else
-				ew32(ITR, 0);
+			e1000e_write_itr(adapter, new_itr);
 	}
 }
 
@@ -3049,7 +3127,7 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 
 	ew32(RCTL, rctl);
 	/* just started the receive unit, no need to restart */
-	adapter->flags &= ~FLAG_RX_RESTART_NOW;
+	adapter->flags &= ~FLAG_RESTART_NOW;
 }
 
 /**
@@ -3144,18 +3222,23 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 		rxcsum &= ~E1000_RXCSUM_TUOFL;
 	ew32(RXCSUM, rxcsum);
 
-	if (adapter->hw.mac.type == e1000_pch2lan) {
-		/* With jumbo frames, excessive C-state transition
-		 * latencies result in dropped transactions.
-		 */
-		if (adapter->netdev->mtu > ETH_DATA_LEN) {
+	/* With jumbo frames, excessive C-state transition latencies result
+	 * in dropped transactions.
+	 */
+	if (adapter->netdev->mtu > ETH_DATA_LEN) {
+		u32 lat =
+		    ((er32(PBA) & E1000_PBA_RXA_MASK) * 1024 -
+		     adapter->max_frame_size) * 8 / 1000;
+
+		if (adapter->flags & FLAG_IS_ICH) {
 			u32 rxdctl = er32(RXDCTL(0));
 			ew32(RXDCTL(0), rxdctl | 0x3);
-			pm_qos_update_request(&adapter->netdev->pm_qos_req, 55);
-		} else {
-			pm_qos_update_request(&adapter->netdev->pm_qos_req,
-					      PM_QOS_DEFAULT_VALUE);
 		}
+
+		pm_qos_update_request(&adapter->netdev->pm_qos_req, lat);
+	} else {
+		pm_qos_update_request(&adapter->netdev->pm_qos_req,
+				      PM_QOS_DEFAULT_VALUE);
 	}
 
 	/* Enable Receives */
@@ -3344,6 +3427,241 @@ static void e1000e_setup_rss_hash(struct e1000_adapter *adapter)
 }
 
 /**
+ * e1000e_get_base_timinca - get default SYSTIM time increment attributes
+ * @adapter: board private structure
+ * @timinca: pointer to returned time increment attributes
+ *
+ * Get attributes for incrementing the System Time Register SYSTIML/H at
+ * the default base frequency, and set the cyclecounter shift value.
+ **/
+s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 incvalue, incperiod, shift;
+
+	/* Make sure clock is enabled on I217 before checking the frequency */
+	if ((hw->mac.type == e1000_pch_lpt) &&
+	    !(er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) &&
+	    !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_ENABLED)) {
+		u32 fextnvm7 = er32(FEXTNVM7);
+
+		if (!(fextnvm7 & (1 << 0))) {
+			ew32(FEXTNVM7, fextnvm7 | (1 << 0));
+			e1e_flush();
+		}
+	}
+
+	switch (hw->mac.type) {
+	case e1000_pch2lan:
+	case e1000_pch_lpt:
+		/* On I217, the clock frequency is 25MHz or 96MHz as
+		 * indicated by the System Clock Frequency Indication
+		 */
+		if ((hw->mac.type != e1000_pch_lpt) ||
+		    (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) {
+			/* Stable 96MHz frequency */
+			incperiod = INCPERIOD_96MHz;
+			incvalue = INCVALUE_96MHz;
+			shift = INCVALUE_SHIFT_96MHz;
+			adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz;
+			break;
+		}
+		/* fall-through */
+	case e1000_82574:
+	case e1000_82583:
+		/* Stable 25MHz frequency */
+		incperiod = INCPERIOD_25MHz;
+		incvalue = INCVALUE_25MHz;
+		shift = INCVALUE_SHIFT_25MHz;
+		adapter->cc.shift = shift;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	*timinca = ((incperiod << E1000_TIMINCA_INCPERIOD_SHIFT) |
+		    ((incvalue << shift) & E1000_TIMINCA_INCVALUE_MASK));
+
+	return 0;
+}
+
+/**
+ * e1000e_config_hwtstamp - configure the hwtstamp registers and enable/disable
+ * @adapter: board private structure
+ *
+ * Outgoing time stamping can be enabled and disabled. Play nice and
+ * disable it when requested, although it shouldn't cause any overhead
+ * when no packet needs it. At most one packet in the queue may be
+ * marked for time stamping, otherwise it would be impossible to tell
+ * for sure to which packet the hardware time stamp belongs.
+ *
+ * Incoming time stamping has to be configured via the hardware filters.
+ * Not all combinations are supported, in particular event type has to be
+ * specified. Matching the kind of event packet is not supported, with the
+ * exception of "all V2 events regardless of level 2 or 4".
+ **/
+static int e1000e_config_hwtstamp(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct hwtstamp_config *config = &adapter->hwtstamp_config;
+	u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
+	u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
+	u32 rxmtrl = 0;
+	u16 rxudp = 0;
+	bool is_l4 = false;
+	bool is_l2 = false;
+	u32 regval;
+	s32 ret_val;
+
+	if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
+		return -EINVAL;
+
+	/* flags reserved for future extensions - must be zero */
+	if (config->flags)
+		return -EINVAL;
+
+	switch (config->tx_type) {
+	case HWTSTAMP_TX_OFF:
+		tsync_tx_ctl = 0;
+		break;
+	case HWTSTAMP_TX_ON:
+		break;
+	default:
+		return -ERANGE;
+	}
+
+	switch (config->rx_filter) {
+	case HWTSTAMP_FILTER_NONE:
+		tsync_rx_ctl = 0;
+		break;
+	case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
+		rxmtrl = E1000_RXMTRL_PTP_V1_SYNC_MESSAGE;
+		is_l4 = true;
+		break;
+	case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
+		rxmtrl = E1000_RXMTRL_PTP_V1_DELAY_REQ_MESSAGE;
+		is_l4 = true;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+		/* Also time stamps V2 L2 Path Delay Request/Response */
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2;
+		rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE;
+		is_l2 = true;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+		/* Also time stamps V2 L2 Path Delay Request/Response. */
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2;
+		rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE;
+		is_l2 = true;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+		/* Hardware cannot filter just V2 L4 Sync messages;
+		 * fall-through to V2 (both L2 and L4) Sync.
+		 */
+	case HWTSTAMP_FILTER_PTP_V2_SYNC:
+		/* Also time stamps V2 Path Delay Request/Response. */
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
+		rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE;
+		is_l2 = true;
+		is_l4 = true;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+		/* Hardware cannot filter just V2 L4 Delay Request messages;
+		 * fall-through to V2 (both L2 and L4) Delay Request.
+		 */
+	case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+		/* Also time stamps V2 Path Delay Request/Response. */
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
+		rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE;
+		is_l2 = true;
+		is_l4 = true;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+		/* Hardware cannot filter just V2 L4 or L2 Event messages;
+		 * fall-through to all V2 (both L2 and L4) Events.
+		 */
+	case HWTSTAMP_FILTER_PTP_V2_EVENT:
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2;
+		config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
+		is_l2 = true;
+		is_l4 = true;
+		break;
+	case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+		/* For V1, the hardware can only filter Sync messages or
+		 * Delay Request messages but not both so fall-through to
+		 * time stamp all packets.
+		 */
+	case HWTSTAMP_FILTER_ALL:
+		is_l2 = true;
+		is_l4 = true;
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
+		config->rx_filter = HWTSTAMP_FILTER_ALL;
+		break;
+	default:
+		return -ERANGE;
+	}
+
+	/* enable/disable Tx h/w time stamping */
+	regval = er32(TSYNCTXCTL);
+	regval &= ~E1000_TSYNCTXCTL_ENABLED;
+	regval |= tsync_tx_ctl;
+	ew32(TSYNCTXCTL, regval);
+	if ((er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) !=
+	    (regval & E1000_TSYNCTXCTL_ENABLED)) {
+		e_err("Timesync Tx Control register not set as expected\n");
+		return -EAGAIN;
+	}
+
+	/* enable/disable Rx h/w time stamping */
+	regval = er32(TSYNCRXCTL);
+	regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK);
+	regval |= tsync_rx_ctl;
+	ew32(TSYNCRXCTL, regval);
+	if ((er32(TSYNCRXCTL) & (E1000_TSYNCRXCTL_ENABLED |
+				 E1000_TSYNCRXCTL_TYPE_MASK)) !=
+	    (regval & (E1000_TSYNCRXCTL_ENABLED |
+		       E1000_TSYNCRXCTL_TYPE_MASK))) {
+		e_err("Timesync Rx Control register not set as expected\n");
+		return -EAGAIN;
+	}
+
+	/* L2: define ethertype filter for time stamped packets */
+	if (is_l2)
+		rxmtrl |= ETH_P_1588;
+
+	/* define which PTP packets get time stamped */
+	ew32(RXMTRL, rxmtrl);
+
+	/* Filter by destination port */
+	if (is_l4) {
+		rxudp = PTP_EV_PORT;
+		cpu_to_be16s(&rxudp);
+	}
+	ew32(RXUDP, rxudp);
+
+	e1e_flush();
+
+	/* Clear TSYNCRXCTL_VALID & TSYNCTXCTL_VALID bit */
+	er32(RXSTMPH);
+	er32(TXSTMPH);
+
+	/* Get and set the System Time Register SYSTIM base frequency */
+	ret_val = e1000e_get_base_timinca(adapter, &regval);
+	if (ret_val)
+		return ret_val;
+	ew32(TIMINCA, regval);
+
+	/* reset the ns time counter */
+	timecounter_init(&adapter->tc, &adapter->cc,
+			 ktime_to_ns(ktime_get_real()));
+
+	return 0;
+}
+
+/**
  * e1000_configure - configure the hardware for Rx and Tx
  * @adapter: private board structure
  **/
@@ -3509,14 +3827,17 @@ void e1000e_reset(struct e1000_adapter *adapter)
 		break;
 	case e1000_pch2lan:
 	case e1000_pch_lpt:
-		fc->high_water = 0x05C20;
-		fc->low_water = 0x05048;
-		fc->pause_time = 0x0650;
 		fc->refresh_time = 0x0400;
-		if (adapter->netdev->mtu > ETH_DATA_LEN) {
-			pba = 14;
-			ew32(PBA, pba);
+
+		if (adapter->netdev->mtu <= ETH_DATA_LEN) {
+			fc->high_water = 0x05C20;
+			fc->low_water = 0x05048;
+			fc->pause_time = 0x0650;
+			break;
 		}
+
+		fc->high_water = ((pba << 10) * 9 / 10) & E1000_FCRTH_RTH;
+		fc->low_water = ((pba << 10) * 8 / 10) & E1000_FCRTL_RTL;
 		break;
 	}
 
@@ -3569,6 +3890,9 @@ void e1000e_reset(struct e1000_adapter *adapter)
 
 	e1000e_reset_adaptive(hw);
 
+	/* initialize systim and reset the ns time counter */
+	e1000e_config_hwtstamp(adapter);
+
 	if (!netif_running(adapter->netdev) &&
 	    !test_bit(__E1000_TESTING, &adapter->state)) {
 		e1000_power_down_phy(adapter);
@@ -3705,6 +4029,24 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter)
 }
 
 /**
+ * e1000e_cyclecounter_read - read raw cycle counter (used by time counter)
+ * @cc: cyclecounter structure
+ **/
+static cycle_t e1000e_cyclecounter_read(const struct cyclecounter *cc)
+{
+	struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter,
+						     cc);
+	struct e1000_hw *hw = &adapter->hw;
+	cycle_t systim;
+
+	/* latch SYSTIMH on read of SYSTIML */
+	systim = (cycle_t)er32(SYSTIML);
+	systim |= (cycle_t)er32(SYSTIMH) << 32;
+
+	return systim;
+}
+
+/**
  * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
  * @adapter: board private structure to initialize
  *
@@ -3730,6 +4072,17 @@ static int e1000_sw_init(struct e1000_adapter *adapter)
 	if (e1000_alloc_queues(adapter))
 		return -ENOMEM;
 
+	/* Setup hardware time stamping cyclecounter */
+	if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) {
+		adapter->cc.read = e1000e_cyclecounter_read;
+		adapter->cc.mask = CLOCKSOURCE_MASK(64);
+		adapter->cc.mult = 1;
+		/* cc.shift set in e1000e_get_base_tininca() */
+
+		spin_lock_init(&adapter->systim_lock);
+		INIT_WORK(&adapter->tx_hwtstamp_work, e1000e_tx_hwtstamp_work);
+	}
+
 	/* Explicitly disable IRQ since the NIC can be in any state. */
 	e1000_irq_disable(adapter);
 
@@ -3742,7 +4095,7 @@ static int e1000_sw_init(struct e1000_adapter *adapter)
  * @irq: interrupt number
  * @data: pointer to a network interface device structure
  **/
-static irqreturn_t e1000_intr_msi_test(int irq, void *data)
+static irqreturn_t e1000_intr_msi_test(int __always_unused irq, void *data)
 {
 	struct net_device *netdev = data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -3913,10 +4266,8 @@ static int e1000_open(struct net_device *netdev)
 		e1000_update_mng_vlan(adapter);
 
 	/* DMA latency requirement to workaround jumbo issue */
-	if (adapter->hw.mac.type == e1000_pch2lan)
-		pm_qos_add_request(&adapter->netdev->pm_qos_req,
-				   PM_QOS_CPU_DMA_LATENCY,
-				   PM_QOS_DEFAULT_VALUE);
+	pm_qos_add_request(&adapter->netdev->pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
+			   PM_QOS_DEFAULT_VALUE);
 
 	/* before we allocate an interrupt, we must be ready to handle it.
 	 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
@@ -4024,8 +4375,7 @@ static int e1000_close(struct net_device *netdev)
 	    !test_bit(__E1000_TESTING, &adapter->state))
 		e1000e_release_hw_control(adapter);
 
-	if (adapter->hw.mac.type == e1000_pch2lan)
-		pm_qos_remove_request(&adapter->netdev->pm_qos_req);
+	pm_qos_remove_request(&adapter->netdev->pm_qos_req);
 
 	pm_runtime_put_sync(&pdev->dev);
 
@@ -4312,14 +4662,14 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 	    (adapter->hw.phy.media_type == e1000_media_type_copper)) {
 		int ret_val;
 
-		ret_val  = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr);
-		ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr);
-		ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise);
-		ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa);
-		ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion);
-		ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000);
-		ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
-		ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
+		ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr);
+		ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr);
+		ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise);
+		ret_val |= e1e_rphy(hw, MII_LPA, &phy->lpa);
+		ret_val |= e1e_rphy(hw, MII_EXPANSION, &phy->expansion);
+		ret_val |= e1e_rphy(hw, MII_CTRL1000, &phy->ctrl1000);
+		ret_val |= e1e_rphy(hw, MII_STAT1000, &phy->stat1000);
+		ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus);
 		if (ret_val)
 			e_warn("Error reading PHY register\n");
 	} else {
@@ -4346,9 +4696,8 @@ static void e1000_print_link_info(struct e1000_adapter *adapter)
 	u32 ctrl = er32(CTRL);
 
 	/* Link status message must follow this format for user tools */
-	printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
-		adapter->netdev->name,
-		adapter->link_speed,
+	pr_info("%s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
+		adapter->netdev->name, adapter->link_speed,
 		adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half",
 		(ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE) ? "Rx/Tx" :
 		(ctrl & E1000_CTRL_RFCE) ? "Rx" :
@@ -4401,11 +4750,11 @@ static void e1000e_enable_receives(struct e1000_adapter *adapter)
 {
 	/* make sure the receive unit is started */
 	if ((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
-	    (adapter->flags & FLAG_RX_RESTART_NOW)) {
+	    (adapter->flags & FLAG_RESTART_NOW)) {
 		struct e1000_hw *hw = &adapter->hw;
 		u32 rctl = er32(RCTL);
 		ew32(RCTL, rctl | E1000_RCTL_EN);
-		adapter->flags &= ~FLAG_RX_RESTART_NOW;
+		adapter->flags &= ~FLAG_RESTART_NOW;
 	}
 }
 
@@ -4481,6 +4830,13 @@ static void e1000_watchdog_task(struct work_struct *work)
 						   &adapter->link_speed,
 						   &adapter->link_duplex);
 			e1000_print_link_info(adapter);
+
+			/* check if SmartSpeed worked */
+			e1000e_check_downshift(hw);
+			if (phy->speed_downgraded)
+				netdev_warn(netdev,
+					    "Link Speed was downgraded by SmartSpeed\n");
+
 			/* On supported PHYs, check for duplex mismatch only
 			 * if link has autonegotiated at 10/100 half
 			 */
@@ -4492,9 +4848,9 @@ static void e1000_watchdog_task(struct work_struct *work)
 			    (adapter->link_duplex == HALF_DUPLEX)) {
 				u16 autoneg_exp;
 
-				e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp);
+				e1e_rphy(hw, MII_EXPANSION, &autoneg_exp);
 
-				if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS))
+				if (!(autoneg_exp & EXPANSION_NWAY))
 					e_info("Autonegotiated half duplex but link partner cannot autoneg.  Try forcing full duplex if link gets many collisions.\n");
 			}
 
@@ -4567,15 +4923,22 @@ static void e1000_watchdog_task(struct work_struct *work)
 			adapter->link_speed = 0;
 			adapter->link_duplex = 0;
 			/* Link status message must follow this format */
-			printk(KERN_INFO "e1000e: %s NIC Link is Down\n",
-			       adapter->netdev->name);
+			pr_info("%s NIC Link is Down\n", adapter->netdev->name);
 			netif_carrier_off(netdev);
 			if (!test_bit(__E1000_DOWN, &adapter->state))
 				mod_timer(&adapter->phy_info_timer,
 					  round_jiffies(jiffies + 2 * HZ));
 
-			if (adapter->flags & FLAG_RX_NEEDS_RESTART)
-				schedule_work(&adapter->reset_task);
+			/* The link is lost so the controller stops DMA.
+			 * If there is queued Tx work that cannot be done
+			 * or if on an 8000ES2LAN which requires a Rx packet
+			 * buffer work-around on link down event, reset the
+			 * controller to flush the Tx/Rx packet buffers.
+			 * (Do the reset outside of interrupt context).
+			 */
+			if ((adapter->flags & FLAG_RX_NEEDS_RESTART) ||
+			    (e1000_desc_unused(tx_ring) + 1 < tx_ring->count))
+				adapter->flags |= FLAG_RESTART_NOW;
 			else
 				pm_schedule_suspend(netdev->dev.parent,
 							LINK_TIMEOUT);
@@ -4597,20 +4960,14 @@ link_up:
 	adapter->gotc_old = adapter->stats.gotc;
 	spin_unlock(&adapter->stats64_lock);
 
-	e1000e_update_adaptive(&adapter->hw);
-
-	if (!netif_carrier_ok(netdev) &&
-	    (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) {
-		/* We've lost link, so the controller stops DMA,
-		 * but we've got queued Tx work that's never going
-		 * to get done, so reset controller to flush Tx.
-		 * (Do the reset outside of interrupt context).
-		 */
+	if (adapter->flags & FLAG_RESTART_NOW) {
 		schedule_work(&adapter->reset_task);
 		/* return immediately since reset is imminent */
 		return;
 	}
 
+	e1000e_update_adaptive(&adapter->hw);
+
 	/* Simple mode for Interrupt Throttle Rate (ITR) */
 	if (adapter->itr_setting == 4) {
 		/* Symmetric Tx/Rx gets a reduced ITR=2000;
@@ -4647,6 +5004,17 @@ link_up:
 	if (adapter->flags2 & FLAG2_CHECK_PHY_HANG)
 		e1000e_check_82574_phy_workaround(adapter);
 
+	/* Clear valid timestamp stuck in RXSTMPL/H due to a Rx error */
+	if (adapter->hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE) {
+		if ((adapter->flags2 & FLAG2_CHECK_RX_HWTSTAMP) &&
+		    (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID)) {
+			er32(RXSTMPH);
+			adapter->rx_hwtstamp_cleared++;
+		} else {
+			adapter->flags2 |= FLAG2_CHECK_RX_HWTSTAMP;
+		}
+	}
+
 	/* Reset the timer */
 	if (!test_bit(__E1000_DOWN, &adapter->state))
 		mod_timer(&adapter->watchdog_timer,
@@ -4658,6 +5026,7 @@ link_up:
 #define E1000_TX_FLAGS_TSO		0x00000004
 #define E1000_TX_FLAGS_IPV4		0x00000008
 #define E1000_TX_FLAGS_NO_FCS		0x00000010
+#define E1000_TX_FLAGS_HWTSTAMP		0x00000020
 #define E1000_TX_FLAGS_VLAN_MASK	0xffff0000
 #define E1000_TX_FLAGS_VLAN_SHIFT	16
 
@@ -4916,6 +5285,11 @@ static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count)
 	if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS))
 		txd_lower &= ~(E1000_TXD_CMD_IFCS);
 
+	if (unlikely(tx_flags & E1000_TX_FLAGS_HWTSTAMP)) {
+		txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
+		txd_upper |= E1000_TXD_EXTCMD_TSTAMP;
+	}
+
 	i = tx_ring->next_to_use;
 
 	do {
@@ -4964,12 +5338,11 @@ static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
 	struct e1000_hw *hw =  &adapter->hw;
 	u16 length, offset;
 
-	if (vlan_tx_tag_present(skb)) {
-		if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
-		    (adapter->hw.mng_cookie.status &
-			E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
-			return 0;
-	}
+	if (vlan_tx_tag_present(skb) &&
+	    !((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
+	      (adapter->hw.mng_cookie.status &
+	       E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
+		return 0;
 
 	if (skb->len <= MINIMUM_DHCP_PACKET_SIZE)
 		return 0;
@@ -5140,7 +5513,15 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 	count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit,
 			     nr_frags);
 	if (count) {
-		skb_tx_timestamp(skb);
+		if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+			     !adapter->tx_hwtstamp_skb)) {
+			skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+			tx_flags |= E1000_TX_FLAGS_HWTSTAMP;
+			adapter->tx_hwtstamp_skb = skb_get(skb);
+			schedule_work(&adapter->tx_hwtstamp_work);
+		} else {
+			skb_tx_timestamp(skb);
+		}
 
 		netdev_sent_queue(netdev, skb->len);
 		e1000_tx_queue(tx_ring, tx_flags, count);
@@ -5180,10 +5561,9 @@ static void e1000_reset_task(struct work_struct *work)
 	if (test_bit(__E1000_DOWN, &adapter->state))
 		return;
 
-	if (!((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
-	      (adapter->flags & FLAG_RX_RESTART_NOW))) {
+	if (!(adapter->flags & FLAG_RESTART_NOW)) {
 		e1000e_dump(adapter);
-		e_err("Reset adapter\n");
+		e_err("Reset adapter unexpectedly\n");
 	}
 	e1000e_reinit_locked(adapter);
 }
@@ -5369,6 +5749,61 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
 	return 0;
 }
 
+/**
+ * e1000e_hwtstamp_ioctl - control hardware time stamping
+ * @netdev: network interface device structure
+ * @ifreq: interface request
+ *
+ * Outgoing time stamping can be enabled and disabled. Play nice and
+ * disable it when requested, although it shouldn't cause any overhead
+ * when no packet needs it. At most one packet in the queue may be
+ * marked for time stamping, otherwise it would be impossible to tell
+ * for sure to which packet the hardware time stamp belongs.
+ *
+ * Incoming time stamping has to be configured via the hardware filters.
+ * Not all combinations are supported, in particular event type has to be
+ * specified. Matching the kind of event packet is not supported, with the
+ * exception of "all V2 events regardless of level 2 or 4".
+ **/
+static int e1000e_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct hwtstamp_config config;
+	int ret_val;
+
+	if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+		return -EFAULT;
+
+	adapter->hwtstamp_config = config;
+
+	ret_val = e1000e_config_hwtstamp(adapter);
+	if (ret_val)
+		return ret_val;
+
+	config = adapter->hwtstamp_config;
+
+	switch (config.rx_filter) {
+	case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+	case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+	case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+		/* With V2 type filters which specify a Sync or Delay Request,
+		 * Path Delay Request/Response messages are also time stamped
+		 * by hardware so notify the caller the requested packets plus
+		 * some others are time stamped.
+		 */
+		config.rx_filter = HWTSTAMP_FILTER_SOME;
+		break;
+	default:
+		break;
+	}
+
+	return copy_to_user(ifr->ifr_data, &config,
+			    sizeof(config)) ? -EFAULT : 0;
+}
+
 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 {
 	switch (cmd) {
@@ -5376,6 +5811,8 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 	case SIOCGMIIREG:
 	case SIOCSMIIREG:
 		return e1000_mii_ioctl(netdev, ifr, cmd);
+	case SIOCSHWTSTAMP:
+		return e1000e_hwtstamp_ioctl(netdev, ifr);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -5386,7 +5823,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 i, mac_reg;
 	u16 phy_reg, wuc_enable;
-	int retval = 0;
+	int retval;
 
 	/* copy MAC RARs to PHY RARs */
 	e1000_copy_rx_addrs_to_phy_ich8lan(hw);
@@ -5600,14 +6037,21 @@ static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
 #else
 static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
 {
+	u16 aspm_ctl = 0;
+
+	if (state & PCIE_LINK_STATE_L0S)
+		aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L0S;
+	if (state & PCIE_LINK_STATE_L1)
+		aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L1;
+
 	/* Both device and parent should have the same ASPM setting.
 	 * Disable ASPM in downstream component first and then upstream.
 	 */
-	pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, state);
+	pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_ctl);
 
 	if (pdev->bus->self)
 		pcie_capability_clear_word(pdev->bus->self, PCI_EXP_LNKCTL,
-					   state);
+					   aspm_ctl);
 }
 #endif
 static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
@@ -5792,7 +6236,7 @@ static void e1000_shutdown(struct pci_dev *pdev)
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 
-static irqreturn_t e1000_intr_msix(int irq, void *data)
+static irqreturn_t e1000_intr_msix(int __always_unused irq, void *data)
 {
 	struct net_device *netdev = data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -5956,7 +6400,6 @@ static void e1000_io_resume(struct pci_dev *pdev)
 	 */
 	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000e_get_hw_control(adapter);
-
 }
 
 static void e1000_print_device_info(struct e1000_adapter *adapter)
@@ -6114,8 +6557,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	err = pci_request_selected_regions_exclusive(pdev,
-	                                  pci_select_bars(pdev, IORESOURCE_MEM),
-	                                  e1000e_driver_name);
+					  pci_select_bars(pdev, IORESOURCE_MEM),
+					  e1000e_driver_name);
 	if (err)
 		goto err_pci_reg;
 
@@ -6274,11 +6717,10 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			"NVM Read Error while reading MAC address\n");
 
 	memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
-	memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
 
-	if (!is_valid_ether_addr(netdev->perm_addr)) {
+	if (!is_valid_ether_addr(netdev->dev_addr)) {
 		dev_err(&pdev->dev, "Invalid MAC Address: %pM\n",
-			netdev->perm_addr);
+			netdev->dev_addr);
 		err = -EIO;
 		goto err_eeprom;
 	}
@@ -6364,6 +6806,9 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* carrier off reporting is important to ethtool even BEFORE open */
 	netif_carrier_off(netdev);
 
+	/* init PTP hardware clock */
+	e1000e_ptp_init(adapter);
+
 	e1000_print_device_info(adapter);
 
 	if (pci_dev_run_wake(pdev))
@@ -6412,6 +6857,8 @@ static void e1000_remove(struct pci_dev *pdev)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	bool down = test_bit(__E1000_DOWN, &adapter->state);
 
+	e1000e_ptp_remove(adapter);
+
 	/* The timers may be rescheduled, so explicitly disable them
 	 * from being rescheduled.
 	 */
@@ -6426,6 +6873,14 @@ static void e1000_remove(struct pci_dev *pdev)
 	cancel_work_sync(&adapter->update_phy_task);
 	cancel_work_sync(&adapter->print_hang_task);
 
+	if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) {
+		cancel_work_sync(&adapter->tx_hwtstamp_work);
+		if (adapter->tx_hwtstamp_skb) {
+			dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
+			adapter->tx_hwtstamp_skb = NULL;
+		}
+	}
+
 	if (!(netdev->flags & IFF_UP))
 		e1000_power_down_phy(adapter);
 
@@ -6578,7 +7033,7 @@ static int __init e1000_init_module(void)
 	int ret;
 	pr_info("Intel(R) PRO/1000 Network Driver - %s\n",
 		e1000e_driver_version);
-	pr_info("Copyright(c) 1999 - 2012 Intel Corporation.\n");
+	pr_info("Copyright(c) 1999 - 2013 Intel Corporation.\n");
 	ret = pci_register_driver(&e1000_driver);
 
 	return ret;