Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1687 insertions, 0 deletions

diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
new file mode 100644
index 00000000000..81ebaedaa24
--- /dev/null
+++ b/drivers/net/epic100.c
@@ -0,0 +1,1687 @@
+/* epic100.c: A SMC 83c170 EPIC/100 Fast Ethernet driver for Linux. */
+/*
+	Written/copyright 1997-2001 by Donald Becker.
+
+	This software may be used and distributed according to the terms of
+	the GNU General Public License (GPL), incorporated herein by reference.
+	Drivers based on or derived from this code fall under the GPL and must
+	retain the authorship, copyright and license notice.  This file is not
+	a complete program and may only be used when the entire operating
+	system is licensed under the GPL.
+
+	This driver is for the SMC83c170/175 "EPIC" series, as used on the
+	SMC EtherPower II 9432 PCI adapter, and several CardBus cards.
+
+	The author may be reached as becker@scyld.com, or C/O
+	Scyld Computing Corporation
+	410 Severn Ave., Suite 210
+	Annapolis MD 21403
+
+	Information and updates available at
+	http://www.scyld.com/network/epic100.html
+
+	---------------------------------------------------------------------
+	
+	Linux kernel-specific changes:
+	
+	LK1.1.2 (jgarzik):
+	* Merge becker version 1.09 (4/08/2000)
+
+	LK1.1.3:
+	* Major bugfix to 1.09 driver (Francis Romieu)
+	
+	LK1.1.4 (jgarzik):
+	* Merge becker test version 1.09 (5/29/2000)
+
+	LK1.1.5:
+	* Fix locking (jgarzik)
+	* Limit 83c175 probe to ethernet-class PCI devices (rgooch)
+
+	LK1.1.6:
+	* Merge becker version 1.11
+	* Move pci_enable_device before any PCI BAR len checks
+
+	LK1.1.7:
+	* { fill me in }
+
+	LK1.1.8:
+	* ethtool driver info support (jgarzik)
+
+	LK1.1.9:
+	* ethtool media get/set support (jgarzik)
+
+	LK1.1.10:
+	* revert MII transceiver init change (jgarzik)
+
+	LK1.1.11:
+	* implement ETHTOOL_[GS]SET, _NWAY_RST, _[GS]MSGLVL, _GLINK (jgarzik)
+	* replace some MII-related magic numbers with constants
+
+	LK1.1.12:
+	* fix power-up sequence
+
+	LK1.1.13:
+	* revert version 1.1.12, power-up sequence "fix"
+
+	LK1.1.14 (Kryzsztof Halasa):
+	* fix spurious bad initializations
+	* pound phy a la SMSC's app note on the subject
+	
+	AC1.1.14ac
+	* fix power up/down for ethtool that broke in 1.11
+
+*/
+
+#define DRV_NAME        "epic100"
+#define DRV_VERSION     "1.11+LK1.1.14+AC1.1.14"
+#define DRV_RELDATE     "June 2, 2004"
+
+/* The user-configurable values.
+   These may be modified when a driver module is loaded.*/
+
+static int debug = 1;			/* 1 normal messages, 0 quiet .. 7 verbose. */
+
+/* Used to pass the full-duplex flag, etc. */
+#define MAX_UNITS 8		/* More are supported, limit only on options */
+static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+   Setting to > 1518 effectively disables this feature. */
+static int rx_copybreak;
+
+/* Operational parameters that are set at compile time. */
+
+/* Keep the ring sizes a power of two for operational efficiency.
+   The compiler will convert <unsigned>'%'<2^N> into a bit mask.
+   Making the Tx ring too large decreases the effectiveness of channel
+   bonding and packet priority.
+   There are no ill effects from too-large receive rings. */
+#define TX_RING_SIZE	256
+#define TX_QUEUE_LEN	240		/* Limit ring entries actually used.  */
+#define RX_RING_SIZE	256
+#define TX_TOTAL_SIZE	TX_RING_SIZE*sizeof(struct epic_tx_desc)
+#define RX_TOTAL_SIZE	RX_RING_SIZE*sizeof(struct epic_rx_desc)
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT  (2*HZ)
+
+#define PKT_BUF_SZ		1536			/* Size of each temporary Rx buffer.*/
+
+/* Bytes transferred to chip before transmission starts. */
+/* Initial threshold, increased on underflow, rounded down to 4 byte units. */
+#define TX_FIFO_THRESH 256
+#define RX_FIFO_THRESH 1		/* 0-3, 0==32, 64,96, or 3==128 bytes  */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+/* These identify the driver base version and may not be removed. */
+static char version[] __devinitdata =
+DRV_NAME ".c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>\n";
+static char version2[] __devinitdata =
+"  http://www.scyld.com/network/epic100.html\n";
+static char version3[] __devinitdata =
+"  (unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("SMC 83c170 EPIC series Ethernet driver");
+MODULE_LICENSE("GPL");
+
+module_param(debug, int, 0);
+module_param(rx_copybreak, int, 0);
+module_param_array(options, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+MODULE_PARM_DESC(debug, "EPIC/100 debug level (0-5)");
+MODULE_PARM_DESC(options, "EPIC/100: Bits 0-3: media type, bit 4: full duplex");
+MODULE_PARM_DESC(rx_copybreak, "EPIC/100 copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(full_duplex, "EPIC/100 full duplex setting(s) (1)");
+
+/*
+				Theory of Operation
+
+I. Board Compatibility
+
+This device driver is designed for the SMC "EPIC/100", the SMC
+single-chip Ethernet controllers for PCI.  This chip is used on
+the SMC EtherPower II boards.
+
+II. Board-specific settings
+
+PCI bus devices are configured by the system at boot time, so no jumpers
+need to be set on the board.  The system BIOS will assign the
+PCI INTA signal to a (preferably otherwise unused) system IRQ line.
+Note: Kernel versions earlier than 1.3.73 do not support shared PCI
+interrupt lines.
+
+III. Driver operation
+
+IIIa. Ring buffers
+
+IVb. References
+
+http://www.smsc.com/main/datasheets/83c171.pdf
+http://www.smsc.com/main/datasheets/83c175.pdf
+http://scyld.com/expert/NWay.html
+http://www.national.com/pf/DP/DP83840A.html
+
+IVc. Errata
+
+*/
+
+
+enum pci_id_flags_bits {
+        /* Set PCI command register bits before calling probe1(). */
+        PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4,
+        /* Read and map the single following PCI BAR. */
+        PCI_ADDR0=0<<4, PCI_ADDR1=1<<4, PCI_ADDR2=2<<4, PCI_ADDR3=3<<4,
+        PCI_ADDR_64BITS=0x100, PCI_NO_ACPI_WAKE=0x200, PCI_NO_MIN_LATENCY=0x400,
+};
+
+enum chip_capability_flags { MII_PWRDWN=1, TYPE2_INTR=2, NO_MII=4 };
+
+#define EPIC_TOTAL_SIZE 0x100
+#define USE_IO_OPS 1
+#ifdef USE_IO_OPS
+#define EPIC_IOTYPE PCI_USES_MASTER|PCI_USES_IO|PCI_ADDR0
+#else
+#define EPIC_IOTYPE PCI_USES_MASTER|PCI_USES_MEM|PCI_ADDR1
+#endif
+
+typedef enum {
+	SMSC_83C170_0,
+	SMSC_83C170,
+	SMSC_83C175,
+} chip_t;
+
+
+struct epic_chip_info {
+	const char *name;
+	enum pci_id_flags_bits pci_flags;
+        int io_size;                            /* Needed for I/O region check or ioremap(). */
+        int drv_flags;                          /* Driver use, intended as capability flags. */
+};
+
+
+/* indexed by chip_t */
+static struct epic_chip_info pci_id_tbl[] = {
+	{ "SMSC EPIC/100 83c170",
+	 EPIC_IOTYPE, EPIC_TOTAL_SIZE, TYPE2_INTR | NO_MII | MII_PWRDWN },
+	{ "SMSC EPIC/100 83c170",
+	 EPIC_IOTYPE, EPIC_TOTAL_SIZE, TYPE2_INTR },
+	{ "SMSC EPIC/C 83c175",
+	 EPIC_IOTYPE, EPIC_TOTAL_SIZE, TYPE2_INTR | MII_PWRDWN },
+};
+
+
+static struct pci_device_id epic_pci_tbl[] = {
+	{ 0x10B8, 0x0005, 0x1092, 0x0AB4, 0, 0, SMSC_83C170_0 },
+	{ 0x10B8, 0x0005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SMSC_83C170 },
+	{ 0x10B8, 0x0006, PCI_ANY_ID, PCI_ANY_ID,
+	  PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, SMSC_83C175 },
+	{ 0,}
+};
+MODULE_DEVICE_TABLE (pci, epic_pci_tbl);
+
+	
+#ifndef USE_IO_OPS
+#undef inb
+#undef inw
+#undef inl
+#undef outb
+#undef outw
+#undef outl
+#define inb readb
+#define inw readw
+#define inl readl
+#define outb writeb
+#define outw writew
+#define outl writel
+#endif
+
+/* Offsets to registers, using the (ugh) SMC names. */
+enum epic_registers {
+  COMMAND=0, INTSTAT=4, INTMASK=8, GENCTL=0x0C, NVCTL=0x10, EECTL=0x14,
+  PCIBurstCnt=0x18,
+  TEST1=0x1C, CRCCNT=0x20, ALICNT=0x24, MPCNT=0x28,	/* Rx error counters. */
+  MIICtrl=0x30, MIIData=0x34, MIICfg=0x38,
+  LAN0=64,						/* MAC address. */
+  MC0=80,						/* Multicast filter table. */
+  RxCtrl=96, TxCtrl=112, TxSTAT=0x74,
+  PRxCDAR=0x84, RxSTAT=0xA4, EarlyRx=0xB0, PTxCDAR=0xC4, TxThresh=0xDC,
+};
+
+/* Interrupt register bits, using my own meaningful names. */
+enum IntrStatus {
+	TxIdle=0x40000, RxIdle=0x20000, IntrSummary=0x010000,
+	PCIBusErr170=0x7000, PCIBusErr175=0x1000, PhyEvent175=0x8000,
+	RxStarted=0x0800, RxEarlyWarn=0x0400, CntFull=0x0200, TxUnderrun=0x0100,
+	TxEmpty=0x0080, TxDone=0x0020, RxError=0x0010,
+	RxOverflow=0x0008, RxFull=0x0004, RxHeader=0x0002, RxDone=0x0001,
+};
+enum CommandBits {
+	StopRx=1, StartRx=2, TxQueued=4, RxQueued=8,
+	StopTxDMA=0x20, StopRxDMA=0x40, RestartTx=0x80,
+};
+
+#define EpicRemoved	0xffffffff	/* Chip failed or removed (CardBus) */
+
+#define EpicNapiEvent	(TxEmpty | TxDone | \
+			 RxDone | RxStarted | RxEarlyWarn | RxOverflow | RxFull)
+#define EpicNormalEvent	(0x0000ffff & ~EpicNapiEvent)
+
+static u16 media2miictl[16] = {
+	0, 0x0C00, 0x0C00, 0x2000,  0x0100, 0x2100, 0, 0,
+	0, 0, 0, 0,  0, 0, 0, 0 };
+
+/* The EPIC100 Rx and Tx buffer descriptors. */
+
+struct epic_tx_desc {
+	u32 txstatus;
+	u32 bufaddr;
+	u32 buflength;
+	u32 next;
+};
+
+struct epic_rx_desc {
+	u32 rxstatus;
+	u32 bufaddr;
+	u32 buflength;
+	u32 next;
+};
+
+enum desc_status_bits {
+	DescOwn=0x8000,
+};
+
+#define PRIV_ALIGN	15 	/* Required alignment mask */
+struct epic_private {
+	struct epic_rx_desc *rx_ring;
+	struct epic_tx_desc *tx_ring;
+	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
+	struct sk_buff* tx_skbuff[TX_RING_SIZE];
+	/* The addresses of receive-in-place skbuffs. */
+	struct sk_buff* rx_skbuff[RX_RING_SIZE];
+
+	dma_addr_t tx_ring_dma;
+	dma_addr_t rx_ring_dma;
+
+	/* Ring pointers. */
+	spinlock_t lock;				/* Group with Tx control cache line. */
+	spinlock_t napi_lock;
+	unsigned int reschedule_in_poll;
+	unsigned int cur_tx, dirty_tx;
+
+	unsigned int cur_rx, dirty_rx;
+	u32 irq_mask;
+	unsigned int rx_buf_sz;				/* Based on MTU+slack. */
+
+	struct pci_dev *pci_dev;			/* PCI bus location. */
+	int chip_id, chip_flags;
+
+	struct net_device_stats stats;
+	struct timer_list timer;			/* Media selection timer. */
+	int tx_threshold;
+	unsigned char mc_filter[8];
+	signed char phys[4];				/* MII device addresses. */
+	u16 advertising;					/* NWay media advertisement */
+	int mii_phy_cnt;
+	struct mii_if_info mii;
+	unsigned int tx_full:1;				/* The Tx queue is full. */
+	unsigned int default_port:4;		/* Last dev->if_port value. */
+};
+
+static int epic_open(struct net_device *dev);
+static int read_eeprom(long ioaddr, int location);
+static int mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *dev, int phy_id, int loc, int val);
+static void epic_restart(struct net_device *dev);
+static void epic_timer(unsigned long data);
+static void epic_tx_timeout(struct net_device *dev);
+static void epic_init_ring(struct net_device *dev);
+static int epic_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static int epic_rx(struct net_device *dev, int budget);
+static int epic_poll(struct net_device *dev, int *budget);
+static irqreturn_t epic_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static struct ethtool_ops netdev_ethtool_ops;
+static int epic_close(struct net_device *dev);
+static struct net_device_stats *epic_get_stats(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+
+
+
+static int __devinit epic_init_one (struct pci_dev *pdev,
+				    const struct pci_device_id *ent)
+{
+	static int card_idx = -1;
+	long ioaddr;
+	int chip_idx = (int) ent->driver_data;
+	int irq;
+	struct net_device *dev;
+	struct epic_private *ep;
+	int i, ret, option = 0, duplex = 0;
+	void *ring_space;
+	dma_addr_t ring_dma;
+
+/* when built into the kernel, we only print version if device is found */
+#ifndef MODULE
+	static int printed_version;
+	if (!printed_version++)
+		printk (KERN_INFO "%s" KERN_INFO "%s" KERN_INFO "%s",
+			version, version2, version3);
+#endif
+	
+	card_idx++;
+	
+	ret = pci_enable_device(pdev);
+	if (ret)
+		goto out;
+	irq = pdev->irq;
+
+	if (pci_resource_len(pdev, 0) < pci_id_tbl[chip_idx].io_size) {
+		printk (KERN_ERR "card %d: no PCI region space\n", card_idx);
+		ret = -ENODEV;
+		goto err_out_disable;
+	}
+	
+	pci_set_master(pdev);
+
+	ret = pci_request_regions(pdev, DRV_NAME);
+	if (ret < 0)
+		goto err_out_disable;
+
+	ret = -ENOMEM;
+
+	dev = alloc_etherdev(sizeof (*ep));
+	if (!dev) {
+		printk (KERN_ERR "card %d: no memory for eth device\n", card_idx);
+		goto err_out_free_res;
+	}
+	SET_MODULE_OWNER(dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+#ifdef USE_IO_OPS
+	ioaddr = pci_resource_start (pdev, 0);
+#else
+	ioaddr = pci_resource_start (pdev, 1);
+	ioaddr = (long) ioremap (ioaddr, pci_resource_len (pdev, 1));
+	if (!ioaddr) {
+		printk (KERN_ERR DRV_NAME " %d: ioremap failed\n", card_idx);
+		goto err_out_free_netdev;
+	}
+#endif
+
+	pci_set_drvdata(pdev, dev);
+	ep = dev->priv;
+	ep->mii.dev = dev;
+	ep->mii.mdio_read = mdio_read;
+	ep->mii.mdio_write = mdio_write;
+	ep->mii.phy_id_mask = 0x1f;
+	ep->mii.reg_num_mask = 0x1f;
+
+	ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma);
+	if (!ring_space)
+		goto err_out_iounmap;
+	ep->tx_ring = (struct epic_tx_desc *)ring_space;
+	ep->tx_ring_dma = ring_dma;
+
+	ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma);
+	if (!ring_space)
+		goto err_out_unmap_tx;
+	ep->rx_ring = (struct epic_rx_desc *)ring_space;
+	ep->rx_ring_dma = ring_dma;
+
+	if (dev->mem_start) {
+		option = dev->mem_start;
+		duplex = (dev->mem_start & 16) ? 1 : 0;
+	} else if (card_idx >= 0  &&  card_idx < MAX_UNITS) {
+		if (options[card_idx] >= 0)
+			option = options[card_idx];
+		if (full_duplex[card_idx] >= 0)
+			duplex = full_duplex[card_idx];
+	}
+
+	dev->base_addr = ioaddr;
+	dev->irq = irq;
+
+	spin_lock_init(&ep->lock);
+	spin_lock_init(&ep->napi_lock);
+	ep->reschedule_in_poll = 0;
+
+	/* Bring the chip out of low-power mode. */
+	outl(0x4200, ioaddr + GENCTL);
+	/* Magic?!  If we don't set this bit the MII interface won't work. */
+	/* This magic is documented in SMSC app note 7.15 */
+	for (i = 16; i > 0; i--)
+		outl(0x0008, ioaddr + TEST1);
+
+	/* Turn on the MII transceiver. */
+	outl(0x12, ioaddr + MIICfg);
+	if (chip_idx == 1)
+		outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
+	outl(0x0200, ioaddr + GENCTL);
+
+	/* Note: the '175 does not have a serial EEPROM. */
+	for (i = 0; i < 3; i++)
+		((u16 *)dev->dev_addr)[i] = le16_to_cpu(inw(ioaddr + LAN0 + i*4));
+
+	if (debug > 2) {
+		printk(KERN_DEBUG DRV_NAME "(%s): EEPROM contents\n",
+		       pci_name(pdev));
+		for (i = 0; i < 64; i++)
+			printk(" %4.4x%s", read_eeprom(ioaddr, i),
+				   i % 16 == 15 ? "\n" : "");
+	}
+
+	ep->pci_dev = pdev;
+	ep->chip_id = chip_idx;
+	ep->chip_flags = pci_id_tbl[chip_idx].drv_flags;
+	ep->irq_mask = 
+		(ep->chip_flags & TYPE2_INTR ?  PCIBusErr175 : PCIBusErr170)
+		 | CntFull | TxUnderrun | EpicNapiEvent;
+
+	/* Find the connected MII xcvrs.
+	   Doing this in open() would allow detecting external xcvrs later, but
+	   takes much time and no cards have external MII. */
+	{
+		int phy, phy_idx = 0;
+		for (phy = 1; phy < 32 && phy_idx < sizeof(ep->phys); phy++) {
+			int mii_status = mdio_read(dev, phy, MII_BMSR);
+			if (mii_status != 0xffff  &&  mii_status != 0x0000) {
+				ep->phys[phy_idx++] = phy;
+				printk(KERN_INFO DRV_NAME "(%s): MII transceiver #%d control "
+					   "%4.4x status %4.4x.\n",
+					   pci_name(pdev), phy, mdio_read(dev, phy, 0), mii_status);
+			}
+		}
+		ep->mii_phy_cnt = phy_idx;
+		if (phy_idx != 0) {
+			phy = ep->phys[0];
+			ep->mii.advertising = mdio_read(dev, phy, MII_ADVERTISE);
+			printk(KERN_INFO DRV_NAME "(%s): Autonegotiation advertising %4.4x link "
+				   "partner %4.4x.\n",
+				   pci_name(pdev), ep->mii.advertising, mdio_read(dev, phy, 5));
+		} else if ( ! (ep->chip_flags & NO_MII)) {
+			printk(KERN_WARNING DRV_NAME "(%s): ***WARNING***: No MII transceiver found!\n",
+			       pci_name(pdev));
+			/* Use the known PHY address of the EPII. */
+			ep->phys[0] = 3;
+		}
+		ep->mii.phy_id = ep->phys[0];
+	}
+
+	/* Turn off the MII xcvr (175 only!), leave the chip in low-power mode. */
+	if (ep->chip_flags & MII_PWRDWN)
+		outl(inl(ioaddr + NVCTL) & ~0x483C, ioaddr + NVCTL);
+	outl(0x0008, ioaddr + GENCTL);
+
+	/* The lower four bits are the media type. */
+	if (duplex) {
+		ep->mii.force_media = ep->mii.full_duplex = 1;
+		printk(KERN_INFO DRV_NAME "(%s):  Forced full duplex operation requested.\n",
+		       pci_name(pdev));
+	}
+	dev->if_port = ep->default_port = option;
+
+	/* The Epic-specific entries in the device structure. */
+	dev->open = &epic_open;
+	dev->hard_start_xmit = &epic_start_xmit;
+	dev->stop = &epic_close;
+	dev->get_stats = &epic_get_stats;
+	dev->set_multicast_list = &set_rx_mode;
+	dev->do_ioctl = &netdev_ioctl;
+	dev->ethtool_ops = &netdev_ethtool_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
+	dev->tx_timeout = &epic_tx_timeout;
+	dev->poll = epic_poll;
+	dev->weight = 64;
+
+	ret = register_netdev(dev);
+	if (ret < 0)
+		goto err_out_unmap_rx;
+
+	printk(KERN_INFO "%s: %s at %#lx, IRQ %d, ",
+		   dev->name, pci_id_tbl[chip_idx].name, ioaddr, dev->irq);
+	for (i = 0; i < 5; i++)
+		printk("%2.2x:", dev->dev_addr[i]);
+	printk("%2.2x.\n", dev->dev_addr[i]);
+
+out:
+	return ret;
+
+err_out_unmap_rx:
+	pci_free_consistent(pdev, RX_TOTAL_SIZE, ep->rx_ring, ep->rx_ring_dma);
+err_out_unmap_tx:
+	pci_free_consistent(pdev, TX_TOTAL_SIZE, ep->tx_ring, ep->tx_ring_dma);
+err_out_iounmap:
+#ifndef USE_IO_OPS
+	iounmap(ioaddr);
+err_out_free_netdev:
+#endif
+	free_netdev(dev);
+err_out_free_res:
+	pci_release_regions(pdev);
+err_out_disable:
+	pci_disable_device(pdev);
+	goto out;
+}
+
+/* Serial EEPROM section. */
+
+/*  EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK	0x04	/* EEPROM shift clock. */
+#define EE_CS			0x02	/* EEPROM chip select. */
+#define EE_DATA_WRITE	0x08	/* EEPROM chip data in. */
+#define EE_WRITE_0		0x01
+#define EE_WRITE_1		0x09
+#define EE_DATA_READ	0x10	/* EEPROM chip data out. */
+#define EE_ENB			(0x0001 | EE_CS)
+
+/* Delay between EEPROM clock transitions.
+   This serves to flush the operation to the PCI bus.
+ */
+
+#define eeprom_delay()	inl(ee_addr)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD	(5 << 6)
+#define EE_READ64_CMD	(6 << 6)
+#define EE_READ256_CMD	(6 << 8)
+#define EE_ERASE_CMD	(7 << 6)
+
+static void epic_disable_int(struct net_device *dev, struct epic_private *ep)
+{
+	long ioaddr = dev->base_addr;
+
+	outl(0x00000000, ioaddr + INTMASK);
+}
+
+static inline void __epic_pci_commit(long ioaddr)
+{
+#ifndef USE_IO_OPS
+	inl(ioaddr + INTMASK);
+#endif
+}
+
+static inline void epic_napi_irq_off(struct net_device *dev,
+				     struct epic_private *ep)
+{
+	long ioaddr = dev->base_addr;
+
+	outl(ep->irq_mask & ~EpicNapiEvent, ioaddr + INTMASK);
+	__epic_pci_commit(ioaddr);
+}
+
+static inline void epic_napi_irq_on(struct net_device *dev,
+				    struct epic_private *ep)
+{
+	long ioaddr = dev->base_addr;
+
+	/* No need to commit possible posted write */
+	outl(ep->irq_mask | EpicNapiEvent, ioaddr + INTMASK);
+}
+
+static int __devinit read_eeprom(long ioaddr, int location)
+{
+	int i;
+	int retval = 0;
+	long ee_addr = ioaddr + EECTL;
+	int read_cmd = location |
+		(inl(ee_addr) & 0x40 ? EE_READ64_CMD : EE_READ256_CMD);
+
+	outl(EE_ENB & ~EE_CS, ee_addr);
+	outl(EE_ENB, ee_addr);
+
+	/* Shift the read command bits out. */
+	for (i = 12; i >= 0; i--) {
+		short dataval = (read_cmd & (1 << i)) ? EE_WRITE_1 : EE_WRITE_0;
+		outl(EE_ENB | dataval, ee_addr);
+		eeprom_delay();
+		outl(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
+		eeprom_delay();
+	}
+	outl(EE_ENB, ee_addr);
+
+	for (i = 16; i > 0; i--) {
+		outl(EE_ENB | EE_SHIFT_CLK, ee_addr);
+		eeprom_delay();
+		retval = (retval << 1) | ((inl(ee_addr) & EE_DATA_READ) ? 1 : 0);
+		outl(EE_ENB, ee_addr);
+		eeprom_delay();
+	}
+
+	/* Terminate the EEPROM access. */
+	outl(EE_ENB & ~EE_CS, ee_addr);
+	return retval;
+}
+
+#define MII_READOP		1
+#define MII_WRITEOP		2
+static int mdio_read(struct net_device *dev, int phy_id, int location)
+{
+	long ioaddr = dev->base_addr;
+	int read_cmd = (phy_id << 9) | (location << 4) | MII_READOP;
+	int i;
+
+	outl(read_cmd, ioaddr + MIICtrl);
+	/* Typical operation takes 25 loops. */
+	for (i = 400; i > 0; i--) {
+		barrier();
+		if ((inl(ioaddr + MIICtrl) & MII_READOP) == 0) {
+			/* Work around read failure bug. */
+			if (phy_id == 1 && location < 6
+				&& inw(ioaddr + MIIData) == 0xffff) {
+				outl(read_cmd, ioaddr + MIICtrl);
+				continue;
+			}
+			return inw(ioaddr + MIIData);
+		}
+	}
+	return 0xffff;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
+{
+	long ioaddr = dev->base_addr;
+	int i;
+
+	outw(value, ioaddr + MIIData);
+	outl((phy_id << 9) | (loc << 4) | MII_WRITEOP, ioaddr + MIICtrl);
+	for (i = 10000; i > 0; i--) { 
+		barrier();
+		if ((inl(ioaddr + MIICtrl) & MII_WRITEOP) == 0)
+			break;
+	}
+	return;
+}
+
+
+static int epic_open(struct net_device *dev)
+{
+	struct epic_private *ep = dev->priv;
+	long ioaddr = dev->base_addr;
+	int i;
+	int retval;
+
+	/* Soft reset the chip. */
+	outl(0x4001, ioaddr + GENCTL);
+
+	if ((retval = request_irq(dev->irq, &epic_interrupt, SA_SHIRQ, dev->name, dev)))
+		return retval;
+
+	epic_init_ring(dev);
+
+	outl(0x4000, ioaddr + GENCTL);
+	/* This magic is documented in SMSC app note 7.15 */
+	for (i = 16; i > 0; i--)
+		outl(0x0008, ioaddr + TEST1);
+
+	/* Pull the chip out of low-power mode, enable interrupts, and set for
+	   PCI read multiple.  The MIIcfg setting and strange write order are
+	   required by the details of which bits are reset and the transceiver
+	   wiring on the Ositech CardBus card.
+	*/
+#if 0
+	outl(dev->if_port == 1 ? 0x13 : 0x12, ioaddr + MIICfg);
+#endif
+	if (ep->chip_flags & MII_PWRDWN)
+		outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
+
+#if defined(__powerpc__) || defined(__sparc__)		/* Big endian */
+	outl(0x4432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
+	inl(ioaddr + GENCTL);
+	outl(0x0432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
+#else
+	outl(0x4412 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
+	inl(ioaddr + GENCTL);
+	outl(0x0412 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
+#endif
+
+	udelay(20); /* Looks like EPII needs that if you want reliable RX init. FIXME: pci posting bug? */
+	
+	for (i = 0; i < 3; i++)
+		outl(cpu_to_le16(((u16*)dev->dev_addr)[i]), ioaddr + LAN0 + i*4);
+
+	ep->tx_threshold = TX_FIFO_THRESH;
+	outl(ep->tx_threshold, ioaddr + TxThresh);
+
+	if (media2miictl[dev->if_port & 15]) {
+		if (ep->mii_phy_cnt)
+			mdio_write(dev, ep->phys[0], MII_BMCR, media2miictl[dev->if_port&15]);
+		if (dev->if_port == 1) {
+			if (debug > 1)
+				printk(KERN_INFO "%s: Using the 10base2 transceiver, MII "
+					   "status %4.4x.\n",
+					   dev->name, mdio_read(dev, ep->phys[0], MII_BMSR));
+		}
+	} else {
+		int mii_lpa = mdio_read(dev, ep->phys[0], MII_LPA);
+		if (mii_lpa != 0xffff) {
+			if ((mii_lpa & LPA_100FULL) || (mii_lpa & 0x01C0) == LPA_10FULL)
+				ep->mii.full_duplex = 1;
+			else if (! (mii_lpa & LPA_LPACK))
+				mdio_write(dev, ep->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART);
+			if (debug > 1)
+				printk(KERN_INFO "%s: Setting %s-duplex based on MII xcvr %d"
+					   " register read of %4.4x.\n", dev->name,
+					   ep->mii.full_duplex ? "full" : "half",
+					   ep->phys[0], mii_lpa);
+		}
+	}
+
+	outl(ep->mii.full_duplex ? 0x7F : 0x79, ioaddr + TxCtrl);
+	outl(ep->rx_ring_dma, ioaddr + PRxCDAR);
+	outl(ep->tx_ring_dma, ioaddr + PTxCDAR);
+
+	/* Start the chip's Rx process. */
+	set_rx_mode(dev);
+	outl(StartRx | RxQueued, ioaddr + COMMAND);
+
+	netif_start_queue(dev);
+
+	/* Enable interrupts by setting the interrupt mask. */
+	outl((ep->chip_flags & TYPE2_INTR ? PCIBusErr175 : PCIBusErr170)
+		 | CntFull | TxUnderrun 
+		 | RxError | RxHeader | EpicNapiEvent, ioaddr + INTMASK);
+
+	if (debug > 1)
+		printk(KERN_DEBUG "%s: epic_open() ioaddr %lx IRQ %d status %4.4x "
+			   "%s-duplex.\n",
+			   dev->name, ioaddr, dev->irq, (int)inl(ioaddr + GENCTL),
+			   ep->mii.full_duplex ? "full" : "half");
+
+	/* Set the timer to switch to check for link beat and perhaps switch
+	   to an alternate media type. */
+	init_timer(&ep->timer);
+	ep->timer.expires = jiffies + 3*HZ;
+	ep->timer.data = (unsigned long)dev;
+	ep->timer.function = &epic_timer;				/* timer handler */
+	add_timer(&ep->timer);
+
+	return 0;
+}
+
+/* Reset the chip to recover from a PCI transaction error.
+   This may occur at interrupt time. */
+static void epic_pause(struct net_device *dev)
+{
+	long ioaddr = dev->base_addr;
+	struct epic_private *ep = dev->priv;
+
+	netif_stop_queue (dev);
+	
+	/* Disable interrupts by clearing the interrupt mask. */
+	outl(0x00000000, ioaddr + INTMASK);
+	/* Stop the chip's Tx and Rx DMA processes. */
+	outw(StopRx | StopTxDMA | StopRxDMA, ioaddr + COMMAND);
+
+	/* Update the error counts. */
+	if (inw(ioaddr + COMMAND) != 0xffff) {
+		ep->stats.rx_missed_errors += inb(ioaddr + MPCNT);
+		ep->stats.rx_frame_errors += inb(ioaddr + ALICNT);
+		ep->stats.rx_crc_errors += inb(ioaddr + CRCCNT);
+	}
+
+	/* Remove the packets on the Rx queue. */
+	epic_rx(dev, RX_RING_SIZE);
+}
+
+static void epic_restart(struct net_device *dev)
+{
+	long ioaddr = dev->base_addr;
+	struct epic_private *ep = dev->priv;
+	int i;
+
+	/* Soft reset the chip. */
+	outl(0x4001, ioaddr + GENCTL);
+
+	printk(KERN_DEBUG "%s: Restarting the EPIC chip, Rx %d/%d Tx %d/%d.\n",
+		   dev->name, ep->cur_rx, ep->dirty_rx, ep->dirty_tx, ep->cur_tx);
+	udelay(1);
+
+	/* This magic is documented in SMSC app note 7.15 */
+	for (i = 16; i > 0; i--)
+		outl(0x0008, ioaddr + TEST1);
+
+#if defined(__powerpc__) || defined(__sparc__)		/* Big endian */
+	outl(0x0432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
+#else
+	outl(0x0412 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
+#endif
+	outl(dev->if_port == 1 ? 0x13 : 0x12, ioaddr + MIICfg);
+	if (ep->chip_flags & MII_PWRDWN)
+		outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
+
+	for (i = 0; i < 3; i++)
+		outl(cpu_to_le16(((u16*)dev->dev_addr)[i]), ioaddr + LAN0 + i*4);
+
+	ep->tx_threshold = TX_FIFO_THRESH;
+	outl(ep->tx_threshold, ioaddr + TxThresh);
+	outl(ep->mii.full_duplex ? 0x7F : 0x79, ioaddr + TxCtrl);
+	outl(ep->rx_ring_dma + (ep->cur_rx%RX_RING_SIZE)*
+		sizeof(struct epic_rx_desc), ioaddr + PRxCDAR);
+	outl(ep->tx_ring_dma + (ep->dirty_tx%TX_RING_SIZE)*
+		 sizeof(struct epic_tx_desc), ioaddr + PTxCDAR);
+
+	/* Start the chip's Rx process. */
+	set_rx_mode(dev);
+	outl(StartRx | RxQueued, ioaddr + COMMAND);
+
+	/* Enable interrupts by setting the interrupt mask. */
+	outl((ep->chip_flags & TYPE2_INTR ? PCIBusErr175 : PCIBusErr170)
+		 | CntFull | TxUnderrun
+		 | RxError | RxHeader | EpicNapiEvent, ioaddr + INTMASK);
+
+	printk(KERN_DEBUG "%s: epic_restart() done, cmd status %4.4x, ctl %4.4x"
+		   " interrupt %4.4x.\n",
+		   dev->name, (int)inl(ioaddr + COMMAND), (int)inl(ioaddr + GENCTL),
+		   (int)inl(ioaddr + INTSTAT));
+	return;
+}
+
+static void check_media(struct net_device *dev)
+{
+	struct epic_private *ep = dev->priv;
+	long ioaddr = dev->base_addr;
+	int mii_lpa = ep->mii_phy_cnt ? mdio_read(dev, ep->phys[0], MII_LPA) : 0;
+	int negotiated = mii_lpa & ep->mii.advertising;
+	int duplex = (negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040;
+
+	if (ep->mii.force_media)
+		return;
+	if (mii_lpa == 0xffff)		/* Bogus read */
+		return;
+	if (ep->mii.full_duplex != duplex) {
+		ep->mii.full_duplex = duplex;
+		printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d link"
+			   " partner capability of %4.4x.\n", dev->name,
+			   ep->mii.full_duplex ? "full" : "half", ep->phys[0], mii_lpa);
+		outl(ep->mii.full_duplex ? 0x7F : 0x79, ioaddr + TxCtrl);
+	}
+}
+
+static void epic_timer(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct epic_private *ep = dev->priv;
+	long ioaddr = dev->base_addr;
+	int next_tick = 5*HZ;
+
+	if (debug > 3) {
+		printk(KERN_DEBUG "%s: Media monitor tick, Tx status %8.8x.\n",
+			   dev->name, (int)inl(ioaddr + TxSTAT));
+		printk(KERN_DEBUG "%s: Other registers are IntMask %4.4x "
+			   "IntStatus %4.4x RxStatus %4.4x.\n",
+			   dev->name, (int)inl(ioaddr + INTMASK),
+			   (int)inl(ioaddr + INTSTAT), (int)inl(ioaddr + RxSTAT));
+	}
+
+	check_media(dev);
+
+	ep->timer.expires = jiffies + next_tick;
+	add_timer(&ep->timer);
+}
+
+static void epic_tx_timeout(struct net_device *dev)
+{
+	struct epic_private *ep = dev->priv;
+	long ioaddr = dev->base_addr;
+
+	if (debug > 0) {
+		printk(KERN_WARNING "%s: Transmit timeout using MII device, "
+			   "Tx status %4.4x.\n",
+			   dev->name, (int)inw(ioaddr + TxSTAT));
+		if (debug > 1) {
+			printk(KERN_DEBUG "%s: Tx indices: dirty_tx %d, cur_tx %d.\n",
+				   dev->name, ep->dirty_tx, ep->cur_tx);
+		}
+	}
+	if (inw(ioaddr + TxSTAT) & 0x10) {		/* Tx FIFO underflow. */
+		ep->stats.tx_fifo_errors++;
+		outl(RestartTx, ioaddr + COMMAND);
+	} else {
+		epic_restart(dev);
+		outl(TxQueued, dev->base_addr + COMMAND);
+	}
+
+	dev->trans_start = jiffies;
+	ep->stats.tx_errors++;
+	if (!ep->tx_full)
+		netif_wake_queue(dev);
+}
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void epic_init_ring(struct net_device *dev)
+{
+	struct epic_private *ep = dev->priv;
+	int i;
+
+	ep->tx_full = 0;
+	ep->dirty_tx = ep->cur_tx = 0;
+	ep->cur_rx = ep->dirty_rx = 0;
+	ep->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
+
+	/* Initialize all Rx descriptors. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		ep->rx_ring[i].rxstatus = 0;
+		ep->rx_ring[i].buflength = cpu_to_le32(ep->rx_buf_sz);
+		ep->rx_ring[i].next = ep->rx_ring_dma + 
+				      (i+1)*sizeof(struct epic_rx_desc);
+		ep->rx_skbuff[i] = NULL;
+	}
+	/* Mark the last entry as wrapping the ring. */
+	ep->rx_ring[i-1].next = ep->rx_ring_dma;
+
+	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		struct sk_buff *skb = dev_alloc_skb(ep->rx_buf_sz);
+		ep->rx_skbuff[i] = skb;
+		if (skb == NULL)
+			break;
+		skb->dev = dev;			/* Mark as being used by this device. */
+		skb_reserve(skb, 2);	/* 16 byte align the IP header. */
+		ep->rx_ring[i].bufaddr = pci_map_single(ep->pci_dev, 
+			skb->tail, ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
+		ep->rx_ring[i].rxstatus = cpu_to_le32(DescOwn);
+	}
+	ep->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
+
+	/* The Tx buffer descriptor is filled in as needed, but we
+	   do need to clear the ownership bit. */
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		ep->tx_skbuff[i] = NULL;
+		ep->tx_ring[i].txstatus = 0x0000;
+		ep->tx_ring[i].next = ep->tx_ring_dma + 
+			(i+1)*sizeof(struct epic_tx_desc);
+	}
+	ep->tx_ring[i-1].next = ep->tx_ring_dma;
+	return;
+}
+
+static int epic_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct epic_private *ep = dev->priv;
+	int entry, free_count;
+	u32 ctrl_word;
+	unsigned long flags;
+	
+	if (skb->len < ETH_ZLEN) {
+		skb = skb_padto(skb, ETH_ZLEN);
+		if (skb == NULL)
+			return 0;
+	}
+
+	/* Caution: the write order is important here, set the field with the
+	   "ownership" bit last. */
+
+	/* Calculate the next Tx descriptor entry. */
+	spin_lock_irqsave(&ep->lock, flags);
+	free_count = ep->cur_tx - ep->dirty_tx;
+	entry = ep->cur_tx % TX_RING_SIZE;
+
+	ep->tx_skbuff[entry] = skb;
+	ep->tx_ring[entry].bufaddr = pci_map_single(ep->pci_dev, skb->data, 
+		 			            skb->len, PCI_DMA_TODEVICE);
+	if (free_count < TX_QUEUE_LEN/2) {/* Typical path */
+		ctrl_word = cpu_to_le32(0x100000); /* No interrupt */
+	} else if (free_count == TX_QUEUE_LEN/2) {
+		ctrl_word = cpu_to_le32(0x140000); /* Tx-done intr. */
+	} else if (free_count < TX_QUEUE_LEN - 1) {
+		ctrl_word = cpu_to_le32(0x100000); /* No Tx-done intr. */
+	} else {
+		/* Leave room for an additional entry. */
+		ctrl_word = cpu_to_le32(0x140000); /* Tx-done intr. */
+		ep->tx_full = 1;
+	}
+	ep->tx_ring[entry].buflength = ctrl_word | cpu_to_le32(skb->len);
+	ep->tx_ring[entry].txstatus =
+		((skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN) << 16)
+		| cpu_to_le32(DescOwn);
+
+	ep->cur_tx++;
+	if (ep->tx_full)
+		netif_stop_queue(dev);
+
+	spin_unlock_irqrestore(&ep->lock, flags);
+	/* Trigger an immediate transmit demand. */
+	outl(TxQueued, dev->base_addr + COMMAND);
+
+	dev->trans_start = jiffies;
+	if (debug > 4)
+		printk(KERN_DEBUG "%s: Queued Tx packet size %d to slot %d, "
+			   "flag %2.2x Tx status %8.8x.\n",
+			   dev->name, (int)skb->len, entry, ctrl_word,
+			   (int)inl(dev->base_addr + TxSTAT));
+
+	return 0;
+}
+
+static void epic_tx_error(struct net_device *dev, struct epic_private *ep,
+			  int status)
+{
+	struct net_device_stats *stats = &ep->stats;
+
+#ifndef final_version
+	/* There was an major error, log it. */
+	if (debug > 1)
+		printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
+		       dev->name, status);
+#endif
+	stats->tx_errors++;
+	if (status & 0x1050)
+		stats->tx_aborted_errors++;
+	if (status & 0x0008)
+		stats->tx_carrier_errors++;
+	if (status & 0x0040)
+		stats->tx_window_errors++;
+	if (status & 0x0010)
+		stats->tx_fifo_errors++;
+}
+
+static void epic_tx(struct net_device *dev, struct epic_private *ep)
+{
+	unsigned int dirty_tx, cur_tx;
+
+	/*
+	 * Note: if this lock becomes a problem we can narrow the locked
+	 * region at the cost of occasionally grabbing the lock more times.
+	 */
+	cur_tx = ep->cur_tx;
+	for (dirty_tx = ep->dirty_tx; cur_tx - dirty_tx > 0; dirty_tx++) {
+		struct sk_buff *skb;
+		int entry = dirty_tx % TX_RING_SIZE;
+		int txstatus = le32_to_cpu(ep->tx_ring[entry].txstatus);
+
+		if (txstatus & DescOwn)
+			break;	/* It still hasn't been Txed */
+
+		if (likely(txstatus & 0x0001)) {
+			ep->stats.collisions += (txstatus >> 8) & 15;
+			ep->stats.tx_packets++;
+			ep->stats.tx_bytes += ep->tx_skbuff[entry]->len;
+		} else
+			epic_tx_error(dev, ep, txstatus);
+
+		/* Free the original skb. */
+		skb = ep->tx_skbuff[entry];
+		pci_unmap_single(ep->pci_dev, ep->tx_ring[entry].bufaddr, 
+				 skb->len, PCI_DMA_TODEVICE);
+		dev_kfree_skb_irq(skb);
+		ep->tx_skbuff[entry] = NULL;
+	}
+
+#ifndef final_version
+	if (cur_tx - dirty_tx > TX_RING_SIZE) {
+		printk(KERN_WARNING
+		       "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
+		       dev->name, dirty_tx, cur_tx, ep->tx_full);
+		dirty_tx += TX_RING_SIZE;
+	}
+#endif
+	ep->dirty_tx = dirty_tx;
+	if (ep->tx_full && cur_tx - dirty_tx < TX_QUEUE_LEN - 4) {
+		/* The ring is no longer full, allow new TX entries. */
+		ep->tx_full = 0;
+		netif_wake_queue(dev);
+	}
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+   after the Tx thread. */
+static irqreturn_t epic_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
+{
+	struct net_device *dev = dev_instance;
+	struct epic_private *ep = dev->priv;
+	long ioaddr = dev->base_addr;
+	unsigned int handled = 0;
+	int status;
+
+	status = inl(ioaddr + INTSTAT);
+	/* Acknowledge all of the current interrupt sources ASAP. */
+	outl(status & EpicNormalEvent, ioaddr + INTSTAT);
+
+	if (debug > 4) {
+		printk(KERN_DEBUG "%s: Interrupt, status=%#8.8x new "
+				   "intstat=%#8.8x.\n", dev->name, status,
+				   (int)inl(ioaddr + INTSTAT));
+	}
+
+	if ((status & IntrSummary) == 0)
+		goto out;
+
+	handled = 1;
+
+	if ((status & EpicNapiEvent) && !ep->reschedule_in_poll) {
+		spin_lock(&ep->napi_lock);
+		if (netif_rx_schedule_prep(dev)) {
+			epic_napi_irq_off(dev, ep);
+			__netif_rx_schedule(dev);
+		} else
+			ep->reschedule_in_poll++;
+		spin_unlock(&ep->napi_lock);
+	}
+	status &= ~EpicNapiEvent;
+
+	/* Check uncommon events all at once. */
+	if (status & (CntFull | TxUnderrun | PCIBusErr170 | PCIBusErr175)) {
+		if (status == EpicRemoved)
+			goto out;
+
+		/* Always update the error counts to avoid overhead later. */
+		ep->stats.rx_missed_errors += inb(ioaddr + MPCNT);
+		ep->stats.rx_frame_errors += inb(ioaddr + ALICNT);
+		ep->stats.rx_crc_errors += inb(ioaddr + CRCCNT);
+
+		if (status & TxUnderrun) { /* Tx FIFO underflow. */
+			ep->stats.tx_fifo_errors++;
+			outl(ep->tx_threshold += 128, ioaddr + TxThresh);
+			/* Restart the transmit process. */
+			outl(RestartTx, ioaddr + COMMAND);
+		}
+		if (status & PCIBusErr170) {
+			printk(KERN_ERR "%s: PCI Bus Error! status %4.4x.\n",
+					 dev->name, status);
+			epic_pause(dev);
+			epic_restart(dev);
+		}
+		/* Clear all error sources. */
+		outl(status & 0x7f18, ioaddr + INTSTAT);
+	}
+
+out:
+	if (debug > 3) {
+		printk(KERN_DEBUG "%s: exit interrupt, intr_status=%#4.4x.\n",
+				   dev->name, status);
+	}
+
+	return IRQ_RETVAL(handled);
+}
+
+static int epic_rx(struct net_device *dev, int budget)
+{
+	struct epic_private *ep = dev->priv;
+	int entry = ep->cur_rx % RX_RING_SIZE;
+	int rx_work_limit = ep->dirty_rx + RX_RING_SIZE - ep->cur_rx;
+	int work_done = 0;
+
+	if (debug > 4)
+		printk(KERN_DEBUG " In epic_rx(), entry %d %8.8x.\n", entry,
+			   ep->rx_ring[entry].rxstatus);
+
+	if (rx_work_limit > budget)
+		rx_work_limit = budget;
+
+	/* If we own the next entry, it's a new packet. Send it up. */
+	while ((ep->rx_ring[entry].rxstatus & cpu_to_le32(DescOwn)) == 0) {
+		int status = le32_to_cpu(ep->rx_ring[entry].rxstatus);
+
+		if (debug > 4)
+			printk(KERN_DEBUG "  epic_rx() status was %8.8x.\n", status);
+		if (--rx_work_limit < 0)
+			break;
+		if (status & 0x2006) {
+			if (debug > 2)
+				printk(KERN_DEBUG "%s: epic_rx() error status was %8.8x.\n",
+					   dev->name, status);
+			if (status & 0x2000) {
+				printk(KERN_WARNING "%s: Oversized Ethernet frame spanned "
+					   "multiple buffers, status %4.4x!\n", dev->name, status);
+				ep->stats.rx_length_errors++;
+			} else if (status & 0x0006)
+				/* Rx Frame errors are counted in hardware. */
+				ep->stats.rx_errors++;
+		} else {
+			/* Malloc up new buffer, compatible with net-2e. */
+			/* Omit the four octet CRC from the length. */
+			short pkt_len = (status >> 16) - 4;
+			struct sk_buff *skb;
+
+			if (pkt_len > PKT_BUF_SZ - 4) {
+				printk(KERN_ERR "%s: Oversized Ethernet frame, status %x "
+					   "%d bytes.\n",
+					   dev->name, status, pkt_len);
+				pkt_len = 1514;
+			}
+			/* Check if the packet is long enough to accept without copying
+			   to a minimally-sized skbuff. */
+			if (pkt_len < rx_copybreak
+				&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+				skb->dev = dev;
+				skb_reserve(skb, 2);	/* 16 byte align the IP header */
+				pci_dma_sync_single_for_cpu(ep->pci_dev,
+							    ep->rx_ring[entry].bufaddr,
+							    ep->rx_buf_sz,
+							    PCI_DMA_FROMDEVICE);
+				eth_copy_and_sum(skb, ep->rx_skbuff[entry]->tail, pkt_len, 0);
+				skb_put(skb, pkt_len);
+				pci_dma_sync_single_for_device(ep->pci_dev,
+							       ep->rx_ring[entry].bufaddr,
+							       ep->rx_buf_sz,
+							       PCI_DMA_FROMDEVICE);
+			} else {
+				pci_unmap_single(ep->pci_dev, 
+					ep->rx_ring[entry].bufaddr, 
+					ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
+				skb_put(skb = ep->rx_skbuff[entry], pkt_len);
+				ep->rx_skbuff[entry] = NULL;
+			}
+			skb->protocol = eth_type_trans(skb, dev);
+			netif_receive_skb(skb);
+			dev->last_rx = jiffies;
+			ep->stats.rx_packets++;
+			ep->stats.rx_bytes += pkt_len;
+		}
+		work_done++;
+		entry = (++ep->cur_rx) % RX_RING_SIZE;
+	}
+
+	/* Refill the Rx ring buffers. */
+	for (; ep->cur_rx - ep->dirty_rx > 0; ep->dirty_rx++) {
+		entry = ep->dirty_rx % RX_RING_SIZE;
+		if (ep->rx_skbuff[entry] == NULL) {
+			struct sk_buff *skb;
+			skb = ep->rx_skbuff[entry] = dev_alloc_skb(ep->rx_buf_sz);
+			if (skb == NULL)
+				break;
+			skb->dev = dev;			/* Mark as being used by this device. */
+			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+			ep->rx_ring[entry].bufaddr = pci_map_single(ep->pci_dev, 
+				skb->tail, ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
+			work_done++;
+		}
+		ep->rx_ring[entry].rxstatus = cpu_to_le32(DescOwn);
+	}
+	return work_done;
+}
+
+static void epic_rx_err(struct net_device *dev, struct epic_private *ep)
+{
+	long ioaddr = dev->base_addr;
+	int status;
+
+	status = inl(ioaddr + INTSTAT);
+
+	if (status == EpicRemoved)
+		return;
+	if (status & RxOverflow) 	/* Missed a Rx frame. */
+		ep->stats.rx_errors++;
+	if (status & (RxOverflow | RxFull))
+		outw(RxQueued, ioaddr + COMMAND);
+}
+
+static int epic_poll(struct net_device *dev, int *budget)
+{
+	struct epic_private *ep = dev->priv;
+	int work_done, orig_budget;
+	long ioaddr = dev->base_addr;
+
+	orig_budget = (*budget > dev->quota) ? dev->quota : *budget;
+
+rx_action:
+
+	epic_tx(dev, ep);
+
+	work_done = epic_rx(dev, *budget);
+
+	epic_rx_err(dev, ep);
+
+	*budget -= work_done;
+	dev->quota -= work_done;
+
+	if (netif_running(dev) && (work_done < orig_budget)) {
+		unsigned long flags;
+		int more;
+
+		/* A bit baroque but it avoids a (space hungry) spin_unlock */
+
+		spin_lock_irqsave(&ep->napi_lock, flags);
+
+		more = ep->reschedule_in_poll;
+		if (!more) {
+			__netif_rx_complete(dev);
+			outl(EpicNapiEvent, ioaddr + INTSTAT);
+			epic_napi_irq_on(dev, ep);
+		} else
+			ep->reschedule_in_poll--;
+
+		spin_unlock_irqrestore(&ep->napi_lock, flags);
+
+		if (more)
+			goto rx_action;
+	}
+
+	return (work_done >= orig_budget);
+}
+
+static int epic_close(struct net_device *dev)
+{
+	long ioaddr = dev->base_addr;
+	struct epic_private *ep = dev->priv;
+	struct sk_buff *skb;
+	int i;
+
+	netif_stop_queue(dev);
+
+	if (debug > 1)
+		printk(KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
+			   dev->name, (int)inl(ioaddr + INTSTAT));
+
+	del_timer_sync(&ep->timer);
+
+	epic_disable_int(dev, ep);
+
+	free_irq(dev->irq, dev);
+
+	epic_pause(dev);
+
+	/* Free all the skbuffs in the Rx queue. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		skb = ep->rx_skbuff[i];
+		ep->rx_skbuff[i] = NULL;
+		ep->rx_ring[i].rxstatus = 0;		/* Not owned by Epic chip. */
+		ep->rx_ring[i].buflength = 0;
+		if (skb) {
+			pci_unmap_single(ep->pci_dev, ep->rx_ring[i].bufaddr, 
+				 	 ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
+			dev_kfree_skb(skb);
+		}
+		ep->rx_ring[i].bufaddr = 0xBADF00D0; /* An invalid address. */
+	}
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		skb = ep->tx_skbuff[i];
+		ep->tx_skbuff[i] = NULL;
+		if (!skb)
+			continue;
+		pci_unmap_single(ep->pci_dev, ep->tx_ring[i].bufaddr, 
+				 skb->len, PCI_DMA_TODEVICE);
+		dev_kfree_skb(skb);
+	}
+
+	/* Green! Leave the chip in low-power mode. */
+	outl(0x0008, ioaddr + GENCTL);
+
+	return 0;
+}
+
+static struct net_device_stats *epic_get_stats(struct net_device *dev)
+{
+	struct epic_private *ep = dev->priv;
+	long ioaddr = dev->base_addr;
+
+	if (netif_running(dev)) {
+		/* Update the error counts. */
+		ep->stats.rx_missed_errors += inb(ioaddr + MPCNT);
+		ep->stats.rx_frame_errors += inb(ioaddr + ALICNT);
+		ep->stats.rx_crc_errors += inb(ioaddr + CRCCNT);
+	}
+
+	return &ep->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+   Note that we only use exclusion around actually queueing the
+   new frame, not around filling ep->setup_frame.  This is non-deterministic
+   when re-entered but still correct. */
+
+static void set_rx_mode(struct net_device *dev)
+{
+	long ioaddr = dev->base_addr;
+	struct epic_private *ep = dev->priv;
+	unsigned char mc_filter[8];		 /* Multicast hash filter */
+	int i;
+
+	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
+		outl(0x002C, ioaddr + RxCtrl);
+		/* Unconditionally log net taps. */
+		printk(KERN_INFO "%s: Promiscuous mode enabled.\n", dev->name);
+		memset(mc_filter, 0xff, sizeof(mc_filter));
+	} else if ((dev->mc_count > 0)  ||  (dev->flags & IFF_ALLMULTI)) {
+		/* There is apparently a chip bug, so the multicast filter
+		   is never enabled. */
+		/* Too many to filter perfectly -- accept all multicasts. */
+		memset(mc_filter, 0xff, sizeof(mc_filter));
+		outl(0x000C, ioaddr + RxCtrl);
+	} else if (dev->mc_count == 0) {
+		outl(0x0004, ioaddr + RxCtrl);
+		return;
+	} else {					/* Never executed, for now. */
+		struct dev_mc_list *mclist;
+
+		memset(mc_filter, 0, sizeof(mc_filter));
+		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+			 i++, mclist = mclist->next) {
+			unsigned int bit_nr =
+				ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x3f;
+			mc_filter[bit_nr >> 3] |= (1 << bit_nr);
+		}
+	}
+	/* ToDo: perhaps we need to stop the Tx and Rx process here? */
+	if (memcmp(mc_filter, ep->mc_filter, sizeof(mc_filter))) {
+		for (i = 0; i < 4; i++)
+			outw(((u16 *)mc_filter)[i], ioaddr + MC0 + i*4);
+		memcpy(ep->mc_filter, mc_filter, sizeof(mc_filter));
+	}
+	return;
+}
+
+static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct epic_private *np = dev->priv;
+
+	strcpy (info->driver, DRV_NAME);
+	strcpy (info->version, DRV_VERSION);
+	strcpy (info->bus_info, pci_name(np->pci_dev));
+}
+
+static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct epic_private *np = dev->priv;
+	int rc;
+
+	spin_lock_irq(&np->lock);
+	rc = mii_ethtool_gset(&np->mii, cmd);
+	spin_unlock_irq(&np->lock);
+
+	return rc;
+}
+
+static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct epic_private *np = dev->priv;
+	int rc;
+
+	spin_lock_irq(&np->lock);
+	rc = mii_ethtool_sset(&np->mii, cmd);
+	spin_unlock_irq(&np->lock);
+
+	return rc;
+}
+
+static int netdev_nway_reset(struct net_device *dev)
+{
+	struct epic_private *np = dev->priv;
+	return mii_nway_restart(&np->mii);
+}
+
+static u32 netdev_get_link(struct net_device *dev)
+{
+	struct epic_private *np = dev->priv;
+	return mii_link_ok(&np->mii);
+}
+
+static u32 netdev_get_msglevel(struct net_device *dev)
+{
+	return debug;
+}
+
+static void netdev_set_msglevel(struct net_device *dev, u32 value)
+{
+	debug = value;
+}
+
+static int ethtool_begin(struct net_device *dev)
+{
+	unsigned long ioaddr = dev->base_addr;
+	/* power-up, if interface is down */
+	if (! netif_running(dev)) {
+		outl(0x0200, ioaddr + GENCTL);
+		outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
+	}
+	return 0;
+}
+
+static void ethtool_complete(struct net_device *dev)
+{
+	unsigned long ioaddr = dev->base_addr;
+	/* power-down, if interface is down */
+	if (! netif_running(dev)) {
+		outl(0x0008, ioaddr + GENCTL);
+		outl((inl(ioaddr + NVCTL) & ~0x483C) | 0x0000, ioaddr + NVCTL);
+	}
+}
+
+static struct ethtool_ops netdev_ethtool_ops = {
+	.get_drvinfo		= netdev_get_drvinfo,
+	.get_settings		= netdev_get_settings,
+	.set_settings		= netdev_set_settings,
+	.nway_reset		= netdev_nway_reset,
+	.get_link		= netdev_get_link,
+	.get_msglevel		= netdev_get_msglevel,
+	.set_msglevel		= netdev_set_msglevel,
+	.get_sg			= ethtool_op_get_sg,
+	.get_tx_csum		= ethtool_op_get_tx_csum,
+	.begin			= ethtool_begin,
+	.complete		= ethtool_complete
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct epic_private *np = dev->priv;
+	long ioaddr = dev->base_addr;
+	struct mii_ioctl_data *data = if_mii(rq);
+	int rc;
+
+	/* power-up, if interface is down */
+	if (! netif_running(dev)) {
+		outl(0x0200, ioaddr + GENCTL);
+		outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
+	}
+
+	/* all non-ethtool ioctls (the SIOC[GS]MIIxxx ioctls) */
+	spin_lock_irq(&np->lock);
+	rc = generic_mii_ioctl(&np->mii, data, cmd, NULL);
+	spin_unlock_irq(&np->lock);
+
+	/* power-down, if interface is down */
+	if (! netif_running(dev)) {
+		outl(0x0008, ioaddr + GENCTL);
+		outl((inl(ioaddr + NVCTL) & ~0x483C) | 0x0000, ioaddr + NVCTL);
+	}
+	return rc;
+}
+
+
+static void __devexit epic_remove_one (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct epic_private *ep = dev->priv;
+	
+	pci_free_consistent(pdev, TX_TOTAL_SIZE, ep->tx_ring, ep->tx_ring_dma);
+	pci_free_consistent(pdev, RX_TOTAL_SIZE, ep->rx_ring, ep->rx_ring_dma);
+	unregister_netdev(dev);
+#ifndef USE_IO_OPS
+	iounmap((void*) dev->base_addr);
+#endif
+	pci_release_regions(pdev);
+	free_netdev(dev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+	/* pci_power_off(pdev, -1); */
+}
+
+
+#ifdef CONFIG_PM
+
+static int epic_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	long ioaddr = dev->base_addr;
+
+	if (!netif_running(dev))
+		return 0;
+	epic_pause(dev);
+	/* Put the chip into low-power mode. */
+	outl(0x0008, ioaddr + GENCTL);
+	/* pci_power_off(pdev, -1); */
+	return 0;
+}
+
+
+static int epic_resume (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	if (!netif_running(dev))
+		return 0;
+	epic_restart(dev);
+	/* pci_power_on(pdev); */
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+
+static struct pci_driver epic_driver = {
+	.name		= DRV_NAME,
+	.id_table	= epic_pci_tbl,
+	.probe		= epic_init_one,
+	.remove		= __devexit_p(epic_remove_one),
+#ifdef CONFIG_PM
+	.suspend	= epic_suspend,
+	.resume		= epic_resume,
+#endif /* CONFIG_PM */
+};
+
+
+static int __init epic_init (void)
+{
+/* when a module, this is printed whether or not devices are found in probe */
+#ifdef MODULE
+	printk (KERN_INFO "%s" KERN_INFO "%s" KERN_INFO "%s",
+		version, version2, version3);
+#endif
+
+	return pci_module_init (&epic_driver);
+}
+
+
+static void __exit epic_cleanup (void)
+{
+	pci_unregister_driver (&epic_driver);
+}
+
+
+module_init(epic_init);
+module_exit(epic_cleanup);