Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1752 insertions, 0 deletions

diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c
new file mode 100644
index 00000000000..fc8e7947b33
--- /dev/null
+++ b/drivers/net/eexpress.c
@@ -0,0 +1,1752 @@
+/* Intel EtherExpress 16 device driver for Linux
+ *
+ * Written by John Sullivan, 1995
+ *  based on original code by Donald Becker, with changes by
+ *  Alan Cox and Pauline Middelink.
+ *
+ * Support for 8-bit mode by Zoltan Szilagyi <zoltans@cs.arizona.edu>
+ *
+ * Many modifications, and currently maintained, by
+ *  Philip Blundell <philb@gnu.org>
+ * Added the Compaq LTE  Alan Cox <alan@redhat.com>
+ * Added MCA support Adam Fritzler <mid@auk.cx>
+ *
+ * Note - this driver is experimental still - it has problems on faster
+ * machines. Someone needs to sit down and go through it line by line with
+ * a databook...
+ */
+
+/* The EtherExpress 16 is a fairly simple card, based on a shared-memory
+ * design using the i82586 Ethernet coprocessor.  It bears no relationship,
+ * as far as I know, to the similarly-named "EtherExpress Pro" range.
+ *
+ * Historically, Linux support for these cards has been very bad.  However,
+ * things seem to be getting better slowly.
+ */
+
+/* If your card is confused about what sort of interface it has (eg it
+ * persistently reports "10baseT" when none is fitted), running 'SOFTSET /BART'
+ * or 'SOFTSET /LISA' from DOS seems to help.
+ */
+
+/* Here's the scoop on memory mapping.
+ *
+ * There are three ways to access EtherExpress card memory: either using the
+ * shared-memory mapping, or using PIO through the dataport, or using PIO
+ * through the "shadow memory" ports.
+ *
+ * The shadow memory system works by having the card map some of its memory
+ * as follows:
+ *
+ * (the low five bits of the SMPTR are ignored)
+ *
+ *  base+0x4000..400f      memory at SMPTR+0..15
+ *  base+0x8000..800f      memory at SMPTR+16..31
+ *  base+0xc000..c007      dubious stuff (memory at SMPTR+16..23 apparently)
+ *  base+0xc008..c00f      memory at 0x0008..0x000f
+ *
+ * This last set (the one at c008) is particularly handy because the SCB
+ * lives at 0x0008.  So that set of ports gives us easy random access to data
+ * in the SCB without having to mess around setting up pointers and the like.
+ * We always use this method to access the SCB (via the scb_xx() functions).
+ *
+ * Dataport access works by aiming the appropriate (read or write) pointer
+ * at the first address you're interested in, and then reading or writing from
+ * the dataport.  The pointers auto-increment after each transfer.  We use
+ * this for data transfer.
+ *
+ * We don't use the shared-memory system because it allegedly doesn't work on
+ * all cards, and because it's a bit more prone to go wrong (it's one more
+ * thing to configure...).
+ */
+
+/* Known bugs:
+ *
+ * - The card seems to want to give us two interrupts every time something
+ *   happens, where just one would be better.
+ */
+
+/*
+ *
+ * Note by Zoltan Szilagyi 10-12-96:
+ *
+ * I've succeeded in eliminating the "CU wedged" messages, and hence the
+ * lockups, which were only occurring with cards running in 8-bit mode ("force
+ * 8-bit operation" in Intel's SoftSet utility). This version of the driver
+ * sets the 82586 and the ASIC to 8-bit mode at startup; it also stops the
+ * CU before submitting a packet for transmission, and then restarts it as soon
+ * as the process of handing the packet is complete. This is definitely an
+ * unnecessary slowdown if the card is running in 16-bit mode; therefore one
+ * should detect 16-bit vs 8-bit mode from the EEPROM settings and act 
+ * accordingly. In 8-bit mode with this bugfix I'm getting about 150 K/s for
+ * ftp's, which is significantly better than I get in DOS, so the overhead of
+ * stopping and restarting the CU with each transmit is not prohibitive in
+ * practice.
+ *
+ * Update by David Woodhouse 11/5/99:
+ *
+ * I've seen "CU wedged" messages in 16-bit mode, on the Alpha architecture.
+ * I assume that this is because 16-bit accesses are actually handled as two
+ * 8-bit accesses.
+ */
+
+#ifdef __alpha__
+#define LOCKUP16 1
+#endif
+#ifndef LOCKUP16
+#define LOCKUP16 0
+#endif
+  
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/string.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/mca-legacy.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#ifndef NET_DEBUG
+#define NET_DEBUG 4
+#endif
+
+#include "eexpress.h"
+
+#define EEXP_IO_EXTENT  16
+
+/*
+ * Private data declarations
+ */
+
+struct net_local
+{
+	struct net_device_stats stats;
+	unsigned long last_tx;       /* jiffies when last transmit started */
+	unsigned long init_time;     /* jiffies when eexp_hw_init586 called */
+	unsigned short rx_first;     /* first rx buf, same as RX_BUF_START */
+	unsigned short rx_last;      /* last rx buf */
+	unsigned short rx_ptr;       /* first rx buf to look at */
+	unsigned short tx_head;      /* next free tx buf */
+	unsigned short tx_reap;      /* first in-use tx buf */
+	unsigned short tx_tail;      /* previous tx buf to tx_head */
+	unsigned short tx_link;      /* last known-executing tx buf */
+	unsigned short last_tx_restart;   /* set to tx_link when we
+					     restart the CU */
+	unsigned char started;
+	unsigned short rx_buf_start;
+	unsigned short rx_buf_end;
+	unsigned short num_tx_bufs;
+	unsigned short num_rx_bufs;
+	unsigned char width;         /* 0 for 16bit, 1 for 8bit */
+	unsigned char was_promisc;
+	unsigned char old_mc_count;
+	spinlock_t lock;
+};
+
+/* This is the code and data that is downloaded to the EtherExpress card's
+ * memory at boot time.
+ */
+
+static unsigned short start_code[] = {
+/* 0x0000 */
+	0x0001,                 /* ISCP: busy - cleared after reset */
+	0x0008,0x0000,0x0000,   /* offset,address (lo,hi) of SCB */
+
+	0x0000,0x0000,          /* SCB: status, commands */
+	0x0000,0x0000,          /* links to first command block,
+				   first receive descriptor */
+	0x0000,0x0000,          /* CRC error, alignment error counts */
+	0x0000,0x0000,          /* out of resources, overrun error counts */
+
+	0x0000,0x0000,          /* pad */
+	0x0000,0x0000,
+
+/* 0x20 -- start of 82586 CU program */
+#define CONF_LINK 0x20
+	0x0000,Cmd_Config,      
+	0x0032,                 /* link to next command */
+	0x080c,                 /* 12 bytes follow : fifo threshold=8 */
+	0x2e40,                 /* don't rx bad frames
+				 * SRDY/ARDY => ext. sync. : preamble len=8
+	                         * take addresses from data buffers
+				 * 6 bytes/address
+				 */
+	0x6000,                 /* default backoff method & priority
+				 * interframe spacing = 0x60 */
+	0xf200,                 /* slot time=0x200 
+				 * max collision retry = 0xf */
+#define CONF_PROMISC  0x2e
+	0x0000,                 /* no HDLC : normal CRC : enable broadcast 
+				 * disable promiscuous/multicast modes */
+	0x003c,                 /* minimum frame length = 60 octets) */
+
+	0x0000,Cmd_SetAddr,
+	0x003e,                 /* link to next command */
+#define CONF_HWADDR  0x38
+	0x0000,0x0000,0x0000,   /* hardware address placed here */
+
+	0x0000,Cmd_MCast,
+	0x0076,                 /* link to next command */
+#define CONF_NR_MULTICAST 0x44
+	0x0000,                 /* number of multicast addresses */
+#define CONF_MULTICAST 0x46
+	0x0000, 0x0000, 0x0000, /* some addresses */
+	0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000,
+
+#define CONF_DIAG_RESULT  0x76
+	0x0000, Cmd_Diag,
+	0x007c,                 /* link to next command */
+
+	0x0000,Cmd_TDR|Cmd_INT,
+	0x0084,
+#define CONF_TDR_RESULT  0x82
+	0x0000,
+
+	0x0000,Cmd_END|Cmd_Nop, /* end of configure sequence */
+	0x0084                  /* dummy link */
+};
+
+/* maps irq number to EtherExpress magic value */
+static char irqrmap[] = { 0,0,1,2,3,4,0,0,0,1,5,6,0,0,0,0 };
+
+#ifdef CONFIG_MCA_LEGACY
+/* mapping of the first four bits of the second POS register */
+static unsigned short mca_iomap[] = {
+	0x270, 0x260, 0x250, 0x240, 0x230, 0x220, 0x210, 0x200,
+	0x370, 0x360, 0x350, 0x340, 0x330, 0x320, 0x310, 0x300
+};
+/* bits 5-7 of the second POS register */
+static char mca_irqmap[] = { 12, 9, 3, 4, 5, 10, 11, 15 };
+#endif 
+
+/*
+ * Prototypes for Linux interface
+ */
+
+static int eexp_open(struct net_device *dev);
+static int eexp_close(struct net_device *dev);
+static void eexp_timeout(struct net_device *dev);
+static struct net_device_stats *eexp_stats(struct net_device *dev);
+static int eexp_xmit(struct sk_buff *buf, struct net_device *dev);
+
+static irqreturn_t eexp_irq(int irq, void *dev_addr, struct pt_regs *regs);
+static void eexp_set_multicast(struct net_device *dev);
+
+/*
+ * Prototypes for hardware access functions
+ */
+
+static void eexp_hw_rx_pio(struct net_device *dev);
+static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf,
+		       unsigned short len);
+static int eexp_hw_probe(struct net_device *dev,unsigned short ioaddr);
+static unsigned short eexp_hw_readeeprom(unsigned short ioaddr,
+					 unsigned char location);
+
+static unsigned short eexp_hw_lasttxstat(struct net_device *dev);
+static void eexp_hw_txrestart(struct net_device *dev);
+
+static void eexp_hw_txinit    (struct net_device *dev);
+static void eexp_hw_rxinit    (struct net_device *dev);
+
+static void eexp_hw_init586   (struct net_device *dev);
+static void eexp_setup_filter (struct net_device *dev);
+
+static char *eexp_ifmap[]={"AUI", "BNC", "RJ45"};
+enum eexp_iftype {AUI=0, BNC=1, TPE=2};
+
+#define STARTED_RU      2
+#define STARTED_CU      1
+
+/*
+ * Primitive hardware access functions.
+ */
+
+static inline unsigned short scb_status(struct net_device *dev)
+{
+	return inw(dev->base_addr + 0xc008);
+}
+
+static inline unsigned short scb_rdcmd(struct net_device *dev)
+{
+	return inw(dev->base_addr + 0xc00a);
+}
+
+static inline void scb_command(struct net_device *dev, unsigned short cmd)
+{
+	outw(cmd, dev->base_addr + 0xc00a);
+}
+
+static inline void scb_wrcbl(struct net_device *dev, unsigned short val)
+{
+	outw(val, dev->base_addr + 0xc00c);
+}
+
+static inline void scb_wrrfa(struct net_device *dev, unsigned short val)
+{
+	outw(val, dev->base_addr + 0xc00e);
+}
+
+static inline void set_loopback(struct net_device *dev)
+{
+	outb(inb(dev->base_addr + Config) | 2, dev->base_addr + Config);
+}
+
+static inline void clear_loopback(struct net_device *dev)
+{
+	outb(inb(dev->base_addr + Config) & ~2, dev->base_addr + Config);
+}
+
+static inline unsigned short int SHADOW(short int addr)
+{
+	addr &= 0x1f;
+	if (addr > 0xf) addr += 0x3ff0;
+	return addr + 0x4000;
+}
+
+/*
+ * Linux interface
+ */
+
+/*
+ * checks for presence of EtherExpress card
+ */
+
+static int __init do_express_probe(struct net_device *dev)
+{
+	unsigned short *port;
+	static unsigned short ports[] = { 0x240,0x300,0x310,0x270,0x320,0x340,0 };
+	unsigned short ioaddr = dev->base_addr;
+	int dev_irq = dev->irq;
+	int err;
+
+	SET_MODULE_OWNER(dev);
+
+	dev->if_port = 0xff; /* not set */
+
+#ifdef CONFIG_MCA_LEGACY
+	if (MCA_bus) {
+		int slot = 0;
+
+		/*
+		 * Only find one card at a time.  Subsequent calls
+		 * will find others, however, proper multicard MCA
+		 * probing and setup can't be done with the
+		 * old-style Space.c init routines.  -- ASF
+		 */
+		while (slot != MCA_NOTFOUND) {
+			int pos0, pos1;
+			
+			slot = mca_find_unused_adapter(0x628B, slot);
+			if (slot == MCA_NOTFOUND)
+				break;
+
+			pos0 = mca_read_stored_pos(slot, 2);
+			pos1 = mca_read_stored_pos(slot, 3);
+			ioaddr = mca_iomap[pos1&0xf];
+
+			dev->irq = mca_irqmap[(pos1>>4)&0x7];
+			
+			/*
+			 * XXX: Transciever selection is done
+			 * differently on the MCA version.  
+			 * How to get it to select something
+			 * other than external/AUI is currently
+			 * unknown.  This code is just for looks. -- ASF
+			 */
+			if ((pos0 & 0x7) == 0x1)
+				dev->if_port = AUI;
+			else if ((pos0 & 0x7) == 0x5) {
+				if (pos1 & 0x80)
+					dev->if_port = BNC;
+				else
+					dev->if_port = TPE;
+			}
+
+			mca_set_adapter_name(slot, "Intel EtherExpress 16 MCA");
+			mca_set_adapter_procfn(slot, NULL, dev);
+			mca_mark_as_used(slot);
+
+			break;
+		}
+	}
+#endif
+	if (ioaddr&0xfe00) {
+		if (!request_region(ioaddr, EEXP_IO_EXTENT, "EtherExpress"))
+			return -EBUSY;
+		err = eexp_hw_probe(dev,ioaddr);
+		release_region(ioaddr, EEXP_IO_EXTENT);
+		return err;
+	} else if (ioaddr)
+		return -ENXIO;
+
+	for (port=&ports[0] ; *port ; port++ )
+	{
+		unsigned short sum = 0;
+		int i;
+		if (!request_region(*port, EEXP_IO_EXTENT, "EtherExpress"))
+			continue;
+		for ( i=0 ; i<4 ; i++ )
+		{
+			unsigned short t;
+			t = inb(*port + ID_PORT);
+			sum |= (t>>4) << ((t & 0x03)<<2);
+		}
+		if (sum==0xbaba && !eexp_hw_probe(dev,*port)) {
+			release_region(*port, EEXP_IO_EXTENT);
+			return 0;
+		}
+		release_region(*port, EEXP_IO_EXTENT);
+		dev->irq = dev_irq;
+	}
+	return -ENODEV;
+}
+
+#ifndef MODULE
+struct net_device * __init express_probe(int unit)
+{
+	struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
+	int err;
+
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	sprintf(dev->name, "eth%d", unit);
+	netdev_boot_setup_check(dev);
+
+	err = do_express_probe(dev);
+	if (!err) {
+		err = register_netdev(dev);
+		if (!err)
+			return dev;
+	}
+	free_netdev(dev);
+	return ERR_PTR(err);
+}
+#endif
+
+/*
+ * open and initialize the adapter, ready for use
+ */
+
+static int eexp_open(struct net_device *dev)
+{
+	int ret;
+	unsigned short ioaddr = dev->base_addr;
+	struct net_local *lp = netdev_priv(dev);
+
+#if NET_DEBUG > 6
+	printk(KERN_DEBUG "%s: eexp_open()\n", dev->name);
+#endif
+
+	if (!dev->irq || !irqrmap[dev->irq])
+		return -ENXIO;
+
+	ret = request_irq(dev->irq,&eexp_irq,0,dev->name,dev);
+	if (ret) return ret;
+
+	if (!request_region(ioaddr, EEXP_IO_EXTENT, "EtherExpress")) {
+		printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
+			, ioaddr);
+		goto err_out1;
+	}
+	if (!request_region(ioaddr+0x4000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
+		printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
+			, ioaddr+0x4000);
+		goto err_out2;
+	}
+	if (!request_region(ioaddr+0x8000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
+		printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
+			, ioaddr+0x8000);
+		goto err_out3;
+	}
+	if (!request_region(ioaddr+0xc000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
+		printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
+			, ioaddr+0xc000);
+		goto err_out4;
+	}
+	
+	if (lp->width) {
+		printk("%s: forcing ASIC to 8-bit mode\n", dev->name);
+		outb(inb(dev->base_addr+Config)&~4, dev->base_addr+Config);
+	}
+
+	eexp_hw_init586(dev);
+	netif_start_queue(dev);
+#if NET_DEBUG > 6
+	printk(KERN_DEBUG "%s: leaving eexp_open()\n", dev->name);
+#endif
+	return 0;
+
+	err_out4:
+		release_region(ioaddr+0x8000, EEXP_IO_EXTENT);
+	err_out3:
+		release_region(ioaddr+0x4000, EEXP_IO_EXTENT);
+	err_out2:
+		release_region(ioaddr, EEXP_IO_EXTENT);
+	err_out1:
+		free_irq(dev->irq, dev);
+		return -EBUSY;
+}
+
+/*
+ * close and disable the interface, leaving the 586 in reset.
+ */
+
+static int eexp_close(struct net_device *dev)
+{
+	unsigned short ioaddr = dev->base_addr;
+	struct net_local *lp = netdev_priv(dev);
+
+	int irq = dev->irq;
+
+	netif_stop_queue(dev);
+	
+	outb(SIRQ_dis|irqrmap[irq],ioaddr+SET_IRQ);
+	lp->started = 0;
+	scb_command(dev, SCB_CUsuspend|SCB_RUsuspend);
+	outb(0,ioaddr+SIGNAL_CA);
+	free_irq(irq,dev);
+	outb(i586_RST,ioaddr+EEPROM_Ctrl);
+	release_region(ioaddr, EEXP_IO_EXTENT);
+	release_region(ioaddr+0x4000, 16);
+	release_region(ioaddr+0x8000, 16);
+	release_region(ioaddr+0xc000, 16);
+
+	return 0;
+}
+
+/*
+ * Return interface stats
+ */
+
+static struct net_device_stats *eexp_stats(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+
+	return &lp->stats;
+}
+
+/*
+ * This gets called when a higher level thinks we are broken.  Check that
+ * nothing has become jammed in the CU.
+ */
+
+static void unstick_cu(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	unsigned short ioaddr = dev->base_addr;
+
+	if (lp->started)
+	{
+		if ((jiffies - dev->trans_start)>50)
+		{
+			if (lp->tx_link==lp->last_tx_restart)
+			{
+				unsigned short boguscount=200,rsst;
+				printk(KERN_WARNING "%s: Retransmit timed out, status %04x, resetting...\n",
+				       dev->name, scb_status(dev));
+				eexp_hw_txinit(dev);
+				lp->last_tx_restart = 0;
+				scb_wrcbl(dev, lp->tx_link);
+				scb_command(dev, SCB_CUstart);
+				outb(0,ioaddr+SIGNAL_CA);
+				while (!SCB_complete(rsst=scb_status(dev)))
+				{
+					if (!--boguscount)
+					{
+						boguscount=200;
+						printk(KERN_WARNING "%s: Reset timed out status %04x, retrying...\n",
+						       dev->name,rsst);
+						scb_wrcbl(dev, lp->tx_link);
+						scb_command(dev, SCB_CUstart);
+						outb(0,ioaddr+SIGNAL_CA);
+					}
+				}
+				netif_wake_queue(dev);
+			}
+			else
+			{
+				unsigned short status = scb_status(dev);
+				if (SCB_CUdead(status))
+				{
+					unsigned short txstatus = eexp_hw_lasttxstat(dev);
+					printk(KERN_WARNING "%s: Transmit timed out, CU not active status %04x %04x, restarting...\n",
+					       dev->name, status, txstatus);
+					eexp_hw_txrestart(dev);
+				}
+				else
+				{
+					unsigned short txstatus = eexp_hw_lasttxstat(dev);
+					if (netif_queue_stopped(dev) && !txstatus)
+					{
+						printk(KERN_WARNING "%s: CU wedged, status %04x %04x, resetting...\n",
+						       dev->name,status,txstatus);
+						eexp_hw_init586(dev);
+						netif_wake_queue(dev);
+					}
+					else
+					{
+						printk(KERN_WARNING "%s: transmit timed out\n", dev->name);
+					}
+				}
+			}
+		}
+	}
+	else
+	{
+		if ((jiffies-lp->init_time)>10)
+		{
+			unsigned short status = scb_status(dev);
+			printk(KERN_WARNING "%s: i82586 startup timed out, status %04x, resetting...\n",
+			       dev->name, status);
+			eexp_hw_init586(dev);
+			netif_wake_queue(dev);
+		}
+	}
+}
+
+static void eexp_timeout(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+#ifdef CONFIG_SMP
+	unsigned long flags;
+#endif
+	int status;
+	
+	disable_irq(dev->irq);
+
+	/*
+	 *	Best would be to use synchronize_irq(); spin_lock() here
+	 *	lets make it work first..
+	 */
+	 
+#ifdef CONFIG_SMP
+	spin_lock_irqsave(&lp->lock, flags);
+#endif
+
+	status = scb_status(dev);
+	unstick_cu(dev);
+	printk(KERN_INFO "%s: transmit timed out, %s?\n", dev->name,
+	       (SCB_complete(status)?"lost interrupt":
+		"board on fire"));
+	lp->stats.tx_errors++;
+	lp->last_tx = jiffies;
+	if (!SCB_complete(status)) {
+		scb_command(dev, SCB_CUabort);
+		outb(0,dev->base_addr+SIGNAL_CA);
+	}
+	netif_wake_queue(dev);	
+#ifdef CONFIG_SMP
+	spin_unlock_irqrestore(&lp->lock, flags);
+#endif
+}
+
+/*
+ * Called to transmit a packet, or to allow us to right ourselves
+ * if the kernel thinks we've died.
+ */
+static int eexp_xmit(struct sk_buff *buf, struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	short length = buf->len;
+#ifdef CONFIG_SMP
+	unsigned long flags;
+#endif
+
+#if NET_DEBUG > 6
+	printk(KERN_DEBUG "%s: eexp_xmit()\n", dev->name);
+#endif
+
+	if (buf->len < ETH_ZLEN) {
+		buf = skb_padto(buf, ETH_ZLEN);
+		if (buf == NULL)
+			return 0;
+		length = ETH_ZLEN;
+	}
+
+	disable_irq(dev->irq);
+
+	/*
+	 *	Best would be to use synchronize_irq(); spin_lock() here
+	 *	lets make it work first..
+	 */
+	 
+#ifdef CONFIG_SMP
+	spin_lock_irqsave(&lp->lock, flags);
+#endif
+  
+	{
+		unsigned short *data = (unsigned short *)buf->data;
+
+		lp->stats.tx_bytes += length;
+
+	        eexp_hw_tx_pio(dev,data,length);
+	}
+	dev_kfree_skb(buf);
+#ifdef CONFIG_SMP
+	spin_unlock_irqrestore(&lp->lock, flags);
+#endif
+	enable_irq(dev->irq);
+	return 0;
+}
+
+/*
+ * Handle an EtherExpress interrupt
+ * If we've finished initializing, start the RU and CU up.
+ * If we've already started, reap tx buffers, handle any received packets,
+ * check to make sure we've not become wedged.
+ */
+
+/*
+ * Handle an EtherExpress interrupt
+ * If we've finished initializing, start the RU and CU up.
+ * If we've already started, reap tx buffers, handle any received packets,
+ * check to make sure we've not become wedged.
+ */
+
+static unsigned short eexp_start_irq(struct net_device *dev,
+				     unsigned short status)
+{
+	unsigned short ack_cmd = SCB_ack(status);
+	struct net_local *lp = netdev_priv(dev);
+	unsigned short ioaddr = dev->base_addr;
+	if ((dev->flags & IFF_UP) && !(lp->started & STARTED_CU)) {
+		short diag_status, tdr_status;
+		while (SCB_CUstat(status)==2)
+			status = scb_status(dev);
+#if NET_DEBUG > 4
+		printk("%s: CU went non-active (status %04x)\n",
+		       dev->name, status);
+#endif
+
+		outw(CONF_DIAG_RESULT & ~31, ioaddr + SM_PTR);
+		diag_status = inw(ioaddr + SHADOW(CONF_DIAG_RESULT));
+		if (diag_status & 1<<11) {
+			printk(KERN_WARNING "%s: 82586 failed self-test\n", 
+			       dev->name);
+		} else if (!(diag_status & 1<<13)) {
+			printk(KERN_WARNING "%s: 82586 self-test failed to complete\n", dev->name);
+		}
+
+		outw(CONF_TDR_RESULT & ~31, ioaddr + SM_PTR);
+		tdr_status = inw(ioaddr + SHADOW(CONF_TDR_RESULT));
+		if (tdr_status & (TDR_SHORT|TDR_OPEN)) {
+			printk(KERN_WARNING "%s: TDR reports cable %s at %d tick%s\n", dev->name, (tdr_status & TDR_SHORT)?"short":"broken", tdr_status & TDR_TIME, ((tdr_status & TDR_TIME) != 1) ? "s" : "");
+		} 
+		else if (tdr_status & TDR_XCVRPROBLEM) {
+			printk(KERN_WARNING "%s: TDR reports transceiver problem\n", dev->name);
+		}
+		else if (tdr_status & TDR_LINKOK) {
+#if NET_DEBUG > 4
+			printk(KERN_DEBUG "%s: TDR reports link OK\n", dev->name);
+#endif
+		} else {
+			printk("%s: TDR is ga-ga (status %04x)\n", dev->name,
+			       tdr_status);
+		}
+			
+		lp->started |= STARTED_CU;
+		scb_wrcbl(dev, lp->tx_link);
+		/* if the RU isn't running, start it now */
+		if (!(lp->started & STARTED_RU)) {
+			ack_cmd |= SCB_RUstart;
+			scb_wrrfa(dev, lp->rx_buf_start);
+			lp->rx_ptr = lp->rx_buf_start;
+			lp->started |= STARTED_RU;
+		}
+		ack_cmd |= SCB_CUstart | 0x2000;
+	}
+
+	if ((dev->flags & IFF_UP) && !(lp->started & STARTED_RU) && SCB_RUstat(status)==4) 
+		lp->started|=STARTED_RU;
+
+	return ack_cmd;
+}
+
+static void eexp_cmd_clear(struct net_device *dev)
+{
+	unsigned long int oldtime = jiffies;
+	while (scb_rdcmd(dev) && ((jiffies-oldtime)<10));
+	if (scb_rdcmd(dev)) {
+		printk("%s: command didn't clear\n", dev->name);
+	}
+}
+	
+static irqreturn_t eexp_irq(int irq, void *dev_info, struct pt_regs *regs)
+{
+	struct net_device *dev = dev_info;
+	struct net_local *lp;
+	unsigned short ioaddr,status,ack_cmd;
+	unsigned short old_read_ptr, old_write_ptr;
+
+	if (dev==NULL)
+	{
+		printk(KERN_WARNING "eexpress: irq %d for unknown device\n",
+		       irq);
+		return IRQ_NONE;
+	}
+
+	lp = netdev_priv(dev);
+	ioaddr = dev->base_addr;
+
+	spin_lock(&lp->lock);
+
+	old_read_ptr = inw(ioaddr+READ_PTR);
+	old_write_ptr = inw(ioaddr+WRITE_PTR);
+
+	outb(SIRQ_dis|irqrmap[irq],ioaddr+SET_IRQ);
+
+	
+	status = scb_status(dev);
+
+#if NET_DEBUG > 4
+	printk(KERN_DEBUG "%s: interrupt (status %x)\n", dev->name, status);
+#endif
+
+	if (lp->started == (STARTED_CU | STARTED_RU)) {
+
+		do {
+			eexp_cmd_clear(dev);
+
+			ack_cmd = SCB_ack(status);
+			scb_command(dev, ack_cmd);
+			outb(0,ioaddr+SIGNAL_CA);
+
+			eexp_cmd_clear(dev);
+
+			if (SCB_complete(status)) {
+				if (!eexp_hw_lasttxstat(dev)) {
+					printk("%s: tx interrupt but no status\n", dev->name);
+				}
+			}
+			
+			if (SCB_rxdframe(status)) 
+				eexp_hw_rx_pio(dev);
+
+			status = scb_status(dev);
+		} while (status & 0xc000);
+
+		if (SCB_RUdead(status)) 
+		{
+			printk(KERN_WARNING "%s: RU stopped: status %04x\n",
+			       dev->name,status);
+#if 0
+			printk(KERN_WARNING "%s: cur_rfd=%04x, cur_rbd=%04x\n", dev->name, lp->cur_rfd, lp->cur_rbd);
+			outw(lp->cur_rfd, ioaddr+READ_PTR);
+			printk(KERN_WARNING "%s: [%04x]\n", dev->name, inw(ioaddr+DATAPORT));
+			outw(lp->cur_rfd+6, ioaddr+READ_PTR);
+			printk(KERN_WARNING "%s: rbd is %04x\n", dev->name, rbd= inw(ioaddr+DATAPORT));
+			outw(rbd, ioaddr+READ_PTR);
+			printk(KERN_WARNING "%s: [%04x %04x] ", dev->name, inw(ioaddr+DATAPORT), inw(ioaddr+DATAPORT));
+			outw(rbd+8, ioaddr+READ_PTR);
+			printk("[%04x]\n", inw(ioaddr+DATAPORT));
+#endif
+			lp->stats.rx_errors++;
+#if 1
+		        eexp_hw_rxinit(dev);
+#else
+			lp->cur_rfd = lp->first_rfd;
+#endif
+			scb_wrrfa(dev, lp->rx_buf_start);
+			scb_command(dev, SCB_RUstart);
+			outb(0,ioaddr+SIGNAL_CA);
+		} 
+	} else {
+		if (status & 0x8000) 
+			ack_cmd = eexp_start_irq(dev, status);
+		else
+			ack_cmd = SCB_ack(status);
+		scb_command(dev, ack_cmd);
+		outb(0,ioaddr+SIGNAL_CA);
+	}
+
+	eexp_cmd_clear(dev);
+
+	outb(SIRQ_en|irqrmap[irq],ioaddr+SET_IRQ); 
+
+#if NET_DEBUG > 6 
+	printk("%s: leaving eexp_irq()\n", dev->name);
+#endif
+	outw(old_read_ptr, ioaddr+READ_PTR);
+	outw(old_write_ptr, ioaddr+WRITE_PTR);
+	
+	spin_unlock(&lp->lock);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Hardware access functions
+ */
+
+/*
+ * Set the cable type to use.
+ */
+
+static void eexp_hw_set_interface(struct net_device *dev)
+{
+	unsigned char oldval = inb(dev->base_addr + 0x300e);
+	oldval &= ~0x82;
+	switch (dev->if_port) {
+	case TPE:
+		oldval |= 0x2;
+	case BNC:
+		oldval |= 0x80;
+		break;
+	}
+	outb(oldval, dev->base_addr+0x300e);
+	mdelay(20);
+}
+
+/*
+ * Check all the receive buffers, and hand any received packets
+ * to the upper levels. Basic sanity check on each frame
+ * descriptor, though we don't bother trying to fix broken ones.
+ */
+
+static void eexp_hw_rx_pio(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	unsigned short rx_block = lp->rx_ptr;
+	unsigned short boguscount = lp->num_rx_bufs;
+	unsigned short ioaddr = dev->base_addr;
+	unsigned short status;
+
+#if NET_DEBUG > 6
+	printk(KERN_DEBUG "%s: eexp_hw_rx()\n", dev->name);
+#endif
+
+ 	do {
+ 		unsigned short rfd_cmd, rx_next, pbuf, pkt_len;
+  
+		outw(rx_block, ioaddr + READ_PTR);
+		status = inw(ioaddr + DATAPORT);
+
+		if (FD_Done(status))
+		{
+			rfd_cmd = inw(ioaddr + DATAPORT);
+			rx_next = inw(ioaddr + DATAPORT);
+			pbuf = inw(ioaddr + DATAPORT);
+ 
+			outw(pbuf, ioaddr + READ_PTR);
+			pkt_len = inw(ioaddr + DATAPORT);
+
+			if (rfd_cmd!=0x0000)
+  			{
+				printk(KERN_WARNING "%s: rfd_cmd not zero:0x%04x\n",
+				       dev->name, rfd_cmd);
+				continue;
+			}
+			else if (pbuf!=rx_block+0x16)
+			{
+				printk(KERN_WARNING "%s: rfd and rbd out of sync 0x%04x 0x%04x\n", 
+				       dev->name, rx_block+0x16, pbuf);
+				continue;
+			}
+			else if ((pkt_len & 0xc000)!=0xc000) 
+			{
+				printk(KERN_WARNING "%s: EOF or F not set on received buffer (%04x)\n",
+				       dev->name, pkt_len & 0xc000);
+  				continue;
+  			}
+  			else if (!FD_OK(status)) 
+			{
+				lp->stats.rx_errors++;
+				if (FD_CRC(status))
+					lp->stats.rx_crc_errors++;
+				if (FD_Align(status))
+					lp->stats.rx_frame_errors++;
+				if (FD_Resrc(status))
+					lp->stats.rx_fifo_errors++;
+				if (FD_DMA(status))
+					lp->stats.rx_over_errors++;
+				if (FD_Short(status))
+					lp->stats.rx_length_errors++;
+			}
+			else
+			{
+				struct sk_buff *skb;
+				pkt_len &= 0x3fff;
+				skb = dev_alloc_skb(pkt_len+16);
+				if (skb == NULL)
+				{
+					printk(KERN_WARNING "%s: Memory squeeze, dropping packet\n",dev->name);
+					lp->stats.rx_dropped++;
+					break;
+				}
+				skb->dev = dev;
+				skb_reserve(skb, 2);
+				outw(pbuf+10, ioaddr+READ_PTR);
+			        insw(ioaddr+DATAPORT, skb_put(skb,pkt_len),(pkt_len+1)>>1);
+				skb->protocol = eth_type_trans(skb,dev);
+				netif_rx(skb);
+				dev->last_rx = jiffies;
+				lp->stats.rx_packets++;
+				lp->stats.rx_bytes += pkt_len;
+			}
+			outw(rx_block, ioaddr+WRITE_PTR);
+			outw(0, ioaddr+DATAPORT);
+			outw(0, ioaddr+DATAPORT);
+			rx_block = rx_next;
+		}
+	} while (FD_Done(status) && boguscount--);
+	lp->rx_ptr = rx_block;
+}
+
+/*
+ * Hand a packet to the card for transmission
+ * If we get here, we MUST have already checked
+ * to make sure there is room in the transmit
+ * buffer region.
+ */
+
+static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf,
+		       unsigned short len)
+{
+	struct net_local *lp = netdev_priv(dev);
+	unsigned short ioaddr = dev->base_addr;
+
+	if (LOCKUP16 || lp->width) {
+		/* Stop the CU so that there is no chance that it
+		   jumps off to a bogus address while we are writing the
+		   pointer to the next transmit packet in 8-bit mode -- 
+		   this eliminates the "CU wedged" errors in 8-bit mode.
+		   (Zoltan Szilagyi 10-12-96) */ 
+		scb_command(dev, SCB_CUsuspend);
+		outw(0xFFFF, ioaddr+SIGNAL_CA);
+	}
+
+ 	outw(lp->tx_head, ioaddr + WRITE_PTR);
+
+	outw(0x0000, ioaddr + DATAPORT);
+        outw(Cmd_INT|Cmd_Xmit, ioaddr + DATAPORT);
+	outw(lp->tx_head+0x08, ioaddr + DATAPORT);
+	outw(lp->tx_head+0x0e, ioaddr + DATAPORT);
+
+	outw(0x0000, ioaddr + DATAPORT);
+	outw(0x0000, ioaddr + DATAPORT);
+	outw(lp->tx_head+0x08, ioaddr + DATAPORT);
+
+	outw(0x8000|len, ioaddr + DATAPORT);
+	outw(-1, ioaddr + DATAPORT);
+	outw(lp->tx_head+0x16, ioaddr + DATAPORT);
+	outw(0, ioaddr + DATAPORT);
+
+        outsw(ioaddr + DATAPORT, buf, (len+1)>>1);
+
+	outw(lp->tx_tail+0xc, ioaddr + WRITE_PTR);
+	outw(lp->tx_head, ioaddr + DATAPORT);
+
+	dev->trans_start = jiffies;
+	lp->tx_tail = lp->tx_head;
+	if (lp->tx_head==TX_BUF_START+((lp->num_tx_bufs-1)*TX_BUF_SIZE))
+		lp->tx_head = TX_BUF_START;
+	else
+		lp->tx_head += TX_BUF_SIZE;
+	if (lp->tx_head != lp->tx_reap)
+		netif_wake_queue(dev);
+		
+	if (LOCKUP16 || lp->width) {
+		/* Restart the CU so that the packet can actually
+		   be transmitted. (Zoltan Szilagyi 10-12-96) */
+		scb_command(dev, SCB_CUresume);
+		outw(0xFFFF, ioaddr+SIGNAL_CA);
+	}
+
+	lp->stats.tx_packets++;
+	lp->last_tx = jiffies;
+}
+
+/*
+ * Sanity check the suspected EtherExpress card
+ * Read hardware address, reset card, size memory and initialize buffer
+ * memory pointers. These are held in dev->priv, in case someone has more
+ * than one card in a machine.
+ */
+
+static int __init eexp_hw_probe(struct net_device *dev, unsigned short ioaddr)
+{
+	unsigned short hw_addr[3];
+	unsigned char buswidth;
+	unsigned int memory_size;
+	int i;
+	unsigned short xsum = 0;
+	struct net_local *lp = netdev_priv(dev);
+
+	printk("%s: EtherExpress 16 at %#x ",dev->name,ioaddr);
+
+	outb(ASIC_RST, ioaddr+EEPROM_Ctrl);
+	outb(0, ioaddr+EEPROM_Ctrl);
+	udelay(500);
+	outb(i586_RST, ioaddr+EEPROM_Ctrl);
+
+	hw_addr[0] = eexp_hw_readeeprom(ioaddr,2);
+	hw_addr[1] = eexp_hw_readeeprom(ioaddr,3);
+	hw_addr[2] = eexp_hw_readeeprom(ioaddr,4);
+
+	/* Standard Address or Compaq LTE Address */
+	if (!((hw_addr[2]==0x00aa && ((hw_addr[1] & 0xff00)==0x0000)) ||
+	      (hw_addr[2]==0x0080 && ((hw_addr[1] & 0xff00)==0x5F00)))) 
+	{
+		printk(" rejected: invalid address %04x%04x%04x\n",
+			hw_addr[2],hw_addr[1],hw_addr[0]);
+		return -ENODEV;
+	}
+
+	/* Calculate the EEPROM checksum.  Carry on anyway if it's bad,
+	 * though.
+	 */
+	for (i = 0; i < 64; i++)
+		xsum += eexp_hw_readeeprom(ioaddr, i);
+	if (xsum != 0xbaba)
+		printk(" (bad EEPROM xsum 0x%02x)", xsum);
+
+	dev->base_addr = ioaddr;
+	for ( i=0 ; i<6 ; i++ )
+		dev->dev_addr[i] = ((unsigned char *)hw_addr)[5-i];
+
+	{
+		static char irqmap[]={0, 9, 3, 4, 5, 10, 11, 0};
+		unsigned short setupval = eexp_hw_readeeprom(ioaddr,0);
+
+		/* Use the IRQ from EEPROM if none was given */
+		if (!dev->irq)
+			dev->irq = irqmap[setupval>>13];
+
+		if (dev->if_port == 0xff) {
+			dev->if_port = !(setupval & 0x1000) ? AUI :
+				eexp_hw_readeeprom(ioaddr,5) & 0x1 ? TPE : BNC;
+		}
+
+		buswidth = !((setupval & 0x400) >> 10);
+	}
+
+	memset(lp, 0, sizeof(struct net_local));
+	spin_lock_init(&lp->lock);
+
+ 	printk("(IRQ %d, %s connector, %d-bit bus", dev->irq, 
+ 	       eexp_ifmap[dev->if_port], buswidth?8:16);
+ 
+	if (!request_region(dev->base_addr + 0x300e, 1, "EtherExpress"))
+		return -EBUSY;
+
+ 	eexp_hw_set_interface(dev);
+ 
+	release_region(dev->base_addr + 0x300e, 1);
+  
+	/* Find out how much RAM we have on the card */
+	outw(0, dev->base_addr + WRITE_PTR);
+	for (i = 0; i < 32768; i++)
+		outw(0, dev->base_addr + DATAPORT);
+
+        for (memory_size = 0; memory_size < 64; memory_size++)
+	{
+		outw(memory_size<<10, dev->base_addr + READ_PTR);
+		if (inw(dev->base_addr+DATAPORT))
+			break;
+		outw(memory_size<<10, dev->base_addr + WRITE_PTR);
+		outw(memory_size | 0x5000, dev->base_addr+DATAPORT);
+		outw(memory_size<<10, dev->base_addr + READ_PTR);
+		if (inw(dev->base_addr+DATAPORT) != (memory_size | 0x5000))
+			break;
+	}
+
+	/* Sort out the number of buffers.  We may have 16, 32, 48 or 64k
+	 * of RAM to play with.
+	 */
+	lp->num_tx_bufs = 4;
+	lp->rx_buf_end = 0x3ff6;
+	switch (memory_size)
+	{
+	case 64:
+		lp->rx_buf_end += 0x4000;
+	case 48:
+		lp->num_tx_bufs += 4;
+		lp->rx_buf_end += 0x4000;
+	case 32:
+		lp->rx_buf_end += 0x4000;
+	case 16:
+		printk(", %dk RAM)\n", memory_size);
+		break;
+	default:
+		printk(") bad memory size (%dk).\n", memory_size);
+		return -ENODEV;
+		break;
+	}
+
+	lp->rx_buf_start = TX_BUF_START + (lp->num_tx_bufs*TX_BUF_SIZE);
+	lp->width = buswidth;
+
+	dev->open = eexp_open;
+	dev->stop = eexp_close;
+	dev->hard_start_xmit = eexp_xmit;
+	dev->get_stats = eexp_stats;
+	dev->set_multicast_list = &eexp_set_multicast;
+	dev->tx_timeout = eexp_timeout;
+	dev->watchdog_timeo = 2*HZ;
+	return 0;
+}
+
+/*
+ * Read a word from the EtherExpress on-board serial EEPROM.
+ * The EEPROM contains 64 words of 16 bits.
+ */
+static unsigned short __init eexp_hw_readeeprom(unsigned short ioaddr,
+						    unsigned char location)
+{
+	unsigned short cmd = 0x180|(location&0x7f);
+	unsigned short rval = 0,wval = EC_CS|i586_RST;
+	int i;
+
+	outb(EC_CS|i586_RST,ioaddr+EEPROM_Ctrl);
+	for (i=0x100 ; i ; i>>=1 )
+	{
+		if (cmd&i)
+			wval |= EC_Wr;
+		else
+			wval &= ~EC_Wr;
+
+		outb(wval,ioaddr+EEPROM_Ctrl);
+		outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
+		eeprom_delay();
+		outb(wval,ioaddr+EEPROM_Ctrl);
+		eeprom_delay();
+	}
+	wval &= ~EC_Wr;
+	outb(wval,ioaddr+EEPROM_Ctrl);
+	for (i=0x8000 ; i ; i>>=1 )
+	{
+		outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
+		eeprom_delay();
+		if (inb(ioaddr+EEPROM_Ctrl)&EC_Rd)
+			rval |= i;
+		outb(wval,ioaddr+EEPROM_Ctrl);
+		eeprom_delay();
+	}
+	wval &= ~EC_CS;
+	outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
+	eeprom_delay();
+	outb(wval,ioaddr+EEPROM_Ctrl);
+	eeprom_delay();
+	return rval;
+}
+
+/*
+ * Reap tx buffers and return last transmit status.
+ * if ==0 then either:
+ *    a) we're not transmitting anything, so why are we here?
+ *    b) we've died.
+ * otherwise, Stat_Busy(return) means we've still got some packets
+ * to transmit, Stat_Done(return) means our buffers should be empty
+ * again
+ */
+
+static unsigned short eexp_hw_lasttxstat(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	unsigned short tx_block = lp->tx_reap;
+	unsigned short status;
+
+	if (!netif_queue_stopped(dev) && lp->tx_head==lp->tx_reap)
+		return 0x0000;
+
+	do
+	{
+		outw(tx_block & ~31, dev->base_addr + SM_PTR);
+		status = inw(dev->base_addr + SHADOW(tx_block));
+		if (!Stat_Done(status))
+		{
+			lp->tx_link = tx_block;
+			return status;
+		}
+		else
+		{
+			lp->last_tx_restart = 0;
+			lp->stats.collisions += Stat_NoColl(status);
+			if (!Stat_OK(status))
+			{
+				char *whatsup = NULL;
+				lp->stats.tx_errors++;
+  				if (Stat_Abort(status)) 
+  					lp->stats.tx_aborted_errors++;
+				if (Stat_TNoCar(status)) {
+					whatsup = "aborted, no carrier";
+					lp->stats.tx_carrier_errors++;
+				}
+				if (Stat_TNoCTS(status)) {
+					whatsup = "aborted, lost CTS";
+  					lp->stats.tx_carrier_errors++;
+				}
+				if (Stat_TNoDMA(status)) {
+					whatsup = "FIFO underran";
+  					lp->stats.tx_fifo_errors++;
+				}
+				if (Stat_TXColl(status)) {
+					whatsup = "aborted, too many collisions";
+					lp->stats.tx_aborted_errors++;
+				}
+				if (whatsup)
+					printk(KERN_INFO "%s: transmit %s\n",
+					       dev->name, whatsup);
+			}
+			else
+				lp->stats.tx_packets++;
+		}
+		if (tx_block == TX_BUF_START+((lp->num_tx_bufs-1)*TX_BUF_SIZE))
+			lp->tx_reap = tx_block = TX_BUF_START;
+		else
+			lp->tx_reap = tx_block += TX_BUF_SIZE;
+		netif_wake_queue(dev);
+	}
+	while (lp->tx_reap != lp->tx_head);
+
+	lp->tx_link = lp->tx_tail + 0x08;
+
+	return status;
+}
+
+/*
+ * This should never happen. It is called when some higher routine detects
+ * that the CU has stopped, to try to restart it from the last packet we knew
+ * we were working on, or the idle loop if we had finished for the time.
+ */
+
+static void eexp_hw_txrestart(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	unsigned short ioaddr = dev->base_addr;
+
+	lp->last_tx_restart = lp->tx_link;
+	scb_wrcbl(dev, lp->tx_link);
+	scb_command(dev, SCB_CUstart);
+	outb(0,ioaddr+SIGNAL_CA);
+
+	{
+		unsigned short boguscount=50,failcount=5;
+		while (!scb_status(dev))
+		{
+			if (!--boguscount)
+			{
+				if (--failcount)
+				{
+					printk(KERN_WARNING "%s: CU start timed out, status %04x, cmd %04x\n", dev->name, scb_status(dev), scb_rdcmd(dev));
+				        scb_wrcbl(dev, lp->tx_link);
+					scb_command(dev, SCB_CUstart);
+					outb(0,ioaddr+SIGNAL_CA);
+					boguscount = 100;
+				}
+				else
+				{
+					printk(KERN_WARNING "%s: Failed to restart CU, resetting board...\n",dev->name);
+					eexp_hw_init586(dev);
+					netif_wake_queue(dev);
+					return;
+				}
+			}
+		}
+	}
+}
+
+/*
+ * Writes down the list of transmit buffers into card memory.  Each
+ * entry consists of an 82586 transmit command, followed by a jump
+ * pointing to itself.  When we want to transmit a packet, we write
+ * the data into the appropriate transmit buffer and then modify the
+ * preceding jump to point at the new transmit command.  This means that
+ * the 586 command unit is continuously active.
+ */
+
+static void eexp_hw_txinit(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	unsigned short tx_block = TX_BUF_START;
+	unsigned short curtbuf;
+	unsigned short ioaddr = dev->base_addr;
+
+	for ( curtbuf=0 ; curtbuf<lp->num_tx_bufs ; curtbuf++ )
+	{
+		outw(tx_block, ioaddr + WRITE_PTR);
+
+	        outw(0x0000, ioaddr + DATAPORT);
+		outw(Cmd_INT|Cmd_Xmit, ioaddr + DATAPORT);
+		outw(tx_block+0x08, ioaddr + DATAPORT);
+		outw(tx_block+0x0e, ioaddr + DATAPORT);
+
+		outw(0x0000, ioaddr + DATAPORT);
+		outw(0x0000, ioaddr + DATAPORT);
+		outw(tx_block+0x08, ioaddr + DATAPORT);
+
+		outw(0x8000, ioaddr + DATAPORT);
+		outw(-1, ioaddr + DATAPORT);
+		outw(tx_block+0x16, ioaddr + DATAPORT);
+		outw(0x0000, ioaddr + DATAPORT);
+
+		tx_block += TX_BUF_SIZE;
+	}
+	lp->tx_head = TX_BUF_START;
+	lp->tx_reap = TX_BUF_START;
+	lp->tx_tail = tx_block - TX_BUF_SIZE;
+	lp->tx_link = lp->tx_tail + 0x08;
+	lp->rx_buf_start = tx_block;
+
+}
+
+/*
+ * Write the circular list of receive buffer descriptors to card memory.
+ * The end of the list isn't marked, which means that the 82586 receive
+ * unit will loop until buffers become available (this avoids it giving us
+ * "out of resources" messages).
+ */
+
+static void eexp_hw_rxinit(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	unsigned short rx_block = lp->rx_buf_start;
+	unsigned short ioaddr = dev->base_addr;
+
+	lp->num_rx_bufs = 0;
+	lp->rx_first = lp->rx_ptr = rx_block;
+	do
+	{
+		lp->num_rx_bufs++;
+
+		outw(rx_block, ioaddr + WRITE_PTR);
+
+		outw(0, ioaddr + DATAPORT);  outw(0, ioaddr+DATAPORT);
+		outw(rx_block + RX_BUF_SIZE, ioaddr+DATAPORT);
+		outw(0xffff, ioaddr+DATAPORT);
+
+		outw(0x0000, ioaddr+DATAPORT);
+		outw(0xdead, ioaddr+DATAPORT);
+		outw(0xdead, ioaddr+DATAPORT);
+		outw(0xdead, ioaddr+DATAPORT);
+		outw(0xdead, ioaddr+DATAPORT);
+		outw(0xdead, ioaddr+DATAPORT);
+		outw(0xdead, ioaddr+DATAPORT);
+
+		outw(0x0000, ioaddr+DATAPORT);
+		outw(rx_block + RX_BUF_SIZE + 0x16, ioaddr+DATAPORT);
+		outw(rx_block + 0x20, ioaddr+DATAPORT);
+		outw(0, ioaddr+DATAPORT);
+		outw(RX_BUF_SIZE-0x20, ioaddr+DATAPORT);
+
+		lp->rx_last = rx_block;
+		rx_block += RX_BUF_SIZE;
+	} while (rx_block <= lp->rx_buf_end-RX_BUF_SIZE);
+
+
+	/* Make first Rx frame descriptor point to first Rx buffer
+           descriptor */
+	outw(lp->rx_first + 6, ioaddr+WRITE_PTR);
+	outw(lp->rx_first + 0x16, ioaddr+DATAPORT);
+
+	/* Close Rx frame descriptor ring */
+  	outw(lp->rx_last + 4, ioaddr+WRITE_PTR);
+  	outw(lp->rx_first, ioaddr+DATAPORT);
+  
+	/* Close Rx buffer descriptor ring */
+	outw(lp->rx_last + 0x16 + 2, ioaddr+WRITE_PTR);
+	outw(lp->rx_first + 0x16, ioaddr+DATAPORT);
+	
+}
+
+/*
+ * Un-reset the 586, and start the configuration sequence. We don't wait for
+ * this to finish, but allow the interrupt handler to start the CU and RU for
+ * us.  We can't start the receive/transmission system up before we know that
+ * the hardware is configured correctly.
+ */
+
+static void eexp_hw_init586(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	unsigned short ioaddr = dev->base_addr;
+	int i;
+
+#if NET_DEBUG > 6
+	printk("%s: eexp_hw_init586()\n", dev->name);
+#endif
+
+	lp->started = 0;
+
+	set_loopback(dev);
+
+	outb(SIRQ_dis|irqrmap[dev->irq],ioaddr+SET_IRQ);
+
+	/* Download the startup code */
+	outw(lp->rx_buf_end & ~31, ioaddr + SM_PTR);
+	outw(lp->width?0x0001:0x0000, ioaddr + 0x8006);
+	outw(0x0000, ioaddr + 0x8008);
+	outw(0x0000, ioaddr + 0x800a);
+	outw(0x0000, ioaddr + 0x800c);
+	outw(0x0000, ioaddr + 0x800e);
+
+	for (i = 0; i < (sizeof(start_code)); i+=32) {
+		int j;
+		outw(i, ioaddr + SM_PTR);
+		for (j = 0; j < 16; j+=2)
+			outw(start_code[(i+j)/2],
+			     ioaddr+0x4000+j);
+		for (j = 0; j < 16; j+=2)
+			outw(start_code[(i+j+16)/2],
+			     ioaddr+0x8000+j);
+	}
+
+	/* Do we want promiscuous mode or multicast? */
+	outw(CONF_PROMISC & ~31, ioaddr+SM_PTR);
+	i = inw(ioaddr+SHADOW(CONF_PROMISC));
+	outw((dev->flags & IFF_PROMISC)?(i|1):(i & ~1), 
+	     ioaddr+SHADOW(CONF_PROMISC));
+	lp->was_promisc = dev->flags & IFF_PROMISC;
+#if 0
+	eexp_setup_filter(dev);
+#endif
+
+	/* Write our hardware address */
+	outw(CONF_HWADDR & ~31, ioaddr+SM_PTR);
+	outw(((unsigned short *)dev->dev_addr)[0], ioaddr+SHADOW(CONF_HWADDR));
+	outw(((unsigned short *)dev->dev_addr)[1], 
+	     ioaddr+SHADOW(CONF_HWADDR+2));
+	outw(((unsigned short *)dev->dev_addr)[2],
+	     ioaddr+SHADOW(CONF_HWADDR+4));
+
+	eexp_hw_txinit(dev);
+	eexp_hw_rxinit(dev);
+
+	outb(0,ioaddr+EEPROM_Ctrl);
+	mdelay(5);
+
+	scb_command(dev, 0xf000);
+	outb(0,ioaddr+SIGNAL_CA);
+
+	outw(0, ioaddr+SM_PTR);
+
+	{
+		unsigned short rboguscount=50,rfailcount=5;
+		while (inw(ioaddr+0x4000))
+		{
+			if (!--rboguscount)
+			{
+				printk(KERN_WARNING "%s: i82586 reset timed out, kicking...\n",
+					dev->name);
+				scb_command(dev, 0);
+				outb(0,ioaddr+SIGNAL_CA);
+				rboguscount = 100;
+				if (!--rfailcount)
+				{
+					printk(KERN_WARNING "%s: i82586 not responding, giving up.\n",
+						dev->name);
+					return;
+				}
+			}
+		}
+	}
+
+        scb_wrcbl(dev, CONF_LINK);
+	scb_command(dev, 0xf000|SCB_CUstart);
+	outb(0,ioaddr+SIGNAL_CA);
+
+	{
+		unsigned short iboguscount=50,ifailcount=5;
+		while (!scb_status(dev))
+		{
+			if (!--iboguscount)
+			{
+				if (--ifailcount)
+				{
+					printk(KERN_WARNING "%s: i82586 initialization timed out, status %04x, cmd %04x\n",
+						dev->name, scb_status(dev), scb_rdcmd(dev));
+					scb_wrcbl(dev, CONF_LINK);
+				        scb_command(dev, 0xf000|SCB_CUstart);
+					outb(0,ioaddr+SIGNAL_CA);
+					iboguscount = 100;
+				}
+				else
+				{
+					printk(KERN_WARNING "%s: Failed to initialize i82586, giving up.\n",dev->name);
+					return;
+				}
+			}
+		}
+	}
+
+	clear_loopback(dev);
+	outb(SIRQ_en|irqrmap[dev->irq],ioaddr+SET_IRQ);
+
+	lp->init_time = jiffies;
+#if NET_DEBUG > 6
+        printk("%s: leaving eexp_hw_init586()\n", dev->name);
+#endif
+	return;
+}
+
+static void eexp_setup_filter(struct net_device *dev)
+{
+	struct dev_mc_list *dmi = dev->mc_list;
+	unsigned short ioaddr = dev->base_addr;
+	int count = dev->mc_count;
+	int i;
+	if (count > 8) {
+		printk(KERN_INFO "%s: too many multicast addresses (%d)\n",
+		       dev->name, count);
+		count = 8;
+	}
+	
+	outw(CONF_NR_MULTICAST & ~31, ioaddr+SM_PTR);
+	outw(count, ioaddr+SHADOW(CONF_NR_MULTICAST));
+	for (i = 0; i < count; i++) {
+		unsigned short *data = (unsigned short *)dmi->dmi_addr;
+		if (!dmi) {
+			printk(KERN_INFO "%s: too few multicast addresses\n", dev->name);
+			break;
+		}
+		if (dmi->dmi_addrlen != ETH_ALEN) {
+			printk(KERN_INFO "%s: invalid multicast address length given.\n", dev->name);
+			continue;
+		}
+		outw((CONF_MULTICAST+(6*i)) & ~31, ioaddr+SM_PTR);
+		outw(data[0], ioaddr+SHADOW(CONF_MULTICAST+(6*i)));
+		outw((CONF_MULTICAST+(6*i)+2) & ~31, ioaddr+SM_PTR);
+		outw(data[1], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+2));
+		outw((CONF_MULTICAST+(6*i)+4) & ~31, ioaddr+SM_PTR);
+		outw(data[2], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+4));
+	}
+}
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ */
+static void
+eexp_set_multicast(struct net_device *dev)
+{
+        unsigned short ioaddr = dev->base_addr;
+        struct net_local *lp = netdev_priv(dev);
+        int kick = 0, i;
+        if ((dev->flags & IFF_PROMISC) != lp->was_promisc) {
+                outw(CONF_PROMISC & ~31, ioaddr+SM_PTR);
+                i = inw(ioaddr+SHADOW(CONF_PROMISC));
+                outw((dev->flags & IFF_PROMISC)?(i|1):(i & ~1),
+                     ioaddr+SHADOW(CONF_PROMISC));
+                lp->was_promisc = dev->flags & IFF_PROMISC;
+                kick = 1;
+        }
+        if (!(dev->flags & IFF_PROMISC)) {
+                eexp_setup_filter(dev);
+                if (lp->old_mc_count != dev->mc_count) {
+                        kick = 1;
+                        lp->old_mc_count = dev->mc_count;
+                }
+        }
+        if (kick) {
+                unsigned long oj;
+                scb_command(dev, SCB_CUsuspend);
+                outb(0, ioaddr+SIGNAL_CA);
+                outb(0, ioaddr+SIGNAL_CA);
+#if 0
+                printk("%s: waiting for CU to go suspended\n", dev->name);
+#endif
+                oj = jiffies;
+                while ((SCB_CUstat(scb_status(dev)) == 2) &&
+                       ((jiffies-oj) < 2000));
+		if (SCB_CUstat(scb_status(dev)) == 2)
+			printk("%s: warning, CU didn't stop\n", dev->name);
+                lp->started &= ~(STARTED_CU);
+                scb_wrcbl(dev, CONF_LINK);
+                scb_command(dev, SCB_CUstart);
+                outb(0, ioaddr+SIGNAL_CA);
+        }
+}
+
+
+/*
+ * MODULE stuff
+ */
+
+#ifdef MODULE
+
+#define EEXP_MAX_CARDS     4    /* max number of cards to support */
+
+static struct net_device *dev_eexp[EEXP_MAX_CARDS];
+static int irq[EEXP_MAX_CARDS];
+static int io[EEXP_MAX_CARDS];
+
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(io, "EtherExpress 16 I/O base address(es)");
+MODULE_PARM_DESC(irq, "EtherExpress 16 IRQ number(s)");
+MODULE_LICENSE("GPL");
+
+
+/* Ideally the user would give us io=, irq= for every card.  If any parameters
+ * are specified, we verify and then use them.  If no parameters are given, we
+ * autoprobe for one card only.
+ */
+int init_module(void)
+{
+	struct net_device *dev;
+	int this_dev, found = 0;
+
+	for (this_dev = 0; this_dev < EEXP_MAX_CARDS; this_dev++) {
+		dev = alloc_etherdev(sizeof(struct net_local));
+		dev->irq = irq[this_dev];
+		dev->base_addr = io[this_dev];
+		if (io[this_dev] == 0) {
+			if (this_dev)
+				break;
+			printk(KERN_NOTICE "eexpress.c: Module autoprobe not recommended, give io=xx.\n");
+		}
+		if (do_express_probe(dev) == 0 && register_netdev(dev) == 0) {
+			dev_eexp[this_dev] = dev;
+			found++;
+			continue;
+		}
+		printk(KERN_WARNING "eexpress.c: Failed to register card at 0x%x.\n", io[this_dev]);
+		free_netdev(dev);
+		break;
+	}
+	if (found)
+		return 0;
+	return -ENXIO;
+}
+
+void cleanup_module(void)
+{
+	int this_dev;
+
+	for (this_dev = 0; this_dev < EEXP_MAX_CARDS; this_dev++) {
+		struct net_device *dev = dev_eexp[this_dev];
+		if (dev) {
+			unregister_netdev(dev);
+			free_netdev(dev);
+		}
+	}
+}
+#endif
+
+/*
+ * Local Variables:
+ *  c-file-style: "linux"
+ *  tab-width: 8
+ * End:
+ */