Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream

Conflicts:

	drivers/uwb/wlp/eda.c

1 files changed, 0 insertions, 2401 deletions

diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
deleted file mode 100644
index e3e26c595fa..00000000000
--- a/drivers/net/eepro100.c
+++ /dev/null
@@ -1,2401 +0,0 @@
-/* drivers/net/eepro100.c: An Intel i82557-559 Ethernet driver for Linux. */
-/*
-	Written 1996-1999 by Donald Becker.
-
-	The driver also contains updates by different kernel developers
-	(see incomplete list below).
-	Current maintainer is Andrey V. Savochkin <saw@saw.sw.com.sg>.
-	Please use this email address and linux-kernel mailing list for bug reports.
-
-	This software may be used and distributed according to the terms
-	of the GNU General Public License, incorporated herein by reference.
-
-	This driver is for the Intel EtherExpress Pro100 (Speedo3) design.
-	It should work with all i82557/558/559 boards.
-
-	Version history:
-	1998 Apr - 2000 Feb  Andrey V. Savochkin <saw@saw.sw.com.sg>
-		Serious fixes for multicast filter list setting, TX timeout routine;
-		RX ring refilling logic;  other stuff
-	2000 Feb  Jeff Garzik <jgarzik@pobox.com>
-		Convert to new PCI driver interface
-	2000 Mar 24  Dragan Stancevic <visitor@valinux.com>
-		Disabled FC and ER, to avoid lockups when when we get FCP interrupts.
-	2000 Jul 17 Goutham Rao <goutham.rao@intel.com>
-		PCI DMA API fixes, adding pci_dma_sync_single calls where neccesary
-	2000 Aug 31 David Mosberger <davidm@hpl.hp.com>
-		rx_align support: enables rx DMA without causing unaligned accesses.
-*/
-
-static const char * const version =
-"eepro100.c:v1.09j-t 9/29/99 Donald Becker\n"
-"eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others\n";
-
-/* A few user-configurable values that apply to all boards.
-   First set is undocumented and spelled per Intel recommendations. */
-
-static int congenb /* = 0 */; /* Enable congestion control in the DP83840. */
-static int txfifo = 8;		/* Tx FIFO threshold in 4 byte units, 0-15 */
-static int rxfifo = 8;		/* Rx FIFO threshold, default 32 bytes. */
-/* Tx/Rx DMA burst length, 0-127, 0 == no preemption, tx==128 -> disabled. */
-static int txdmacount = 128;
-static int rxdmacount /* = 0 */;
-
-#if defined(__ia64__) || defined(__alpha__) || defined(__sparc__) || defined(__mips__) || \
-	defined(__arm__)
-  /* align rx buffers to 2 bytes so that IP header is aligned */
-# define rx_align(skb)		skb_reserve((skb), 2)
-# define RxFD_ALIGNMENT		__attribute__ ((aligned (2), packed))
-#else
-# define rx_align(skb)
-# define RxFD_ALIGNMENT
-#endif
-
-/* Set the copy breakpoint for the copy-only-tiny-buffer Rx method.
-   Lower values use more memory, but are faster. */
-static int rx_copybreak = 200;
-
-/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-static int max_interrupt_work = 20;
-
-/* Maximum number of multicast addresses to filter (vs. rx-all-multicast) */
-static int multicast_filter_limit = 64;
-
-/* 'options' is used to pass a transceiver override or full-duplex flag
-   e.g. "options=16" for FD, "options=32" for 100mbps-only. */
-static int full_duplex[] = {-1, -1, -1, -1, -1, -1, -1, -1};
-static int options[] = {-1, -1, -1, -1, -1, -1, -1, -1};
-
-/* A few values that may be tweaked. */
-/* The ring sizes should be a power of two for efficiency. */
-#define TX_RING_SIZE	64
-#define RX_RING_SIZE	64
-/* How much slots multicast filter setup may take.
-   Do not descrease without changing set_rx_mode() implementaion. */
-#define TX_MULTICAST_SIZE   2
-#define TX_MULTICAST_RESERV (TX_MULTICAST_SIZE*2)
-/* Actual number of TX packets queued, must be
-   <= TX_RING_SIZE-TX_MULTICAST_RESERV. */
-#define TX_QUEUE_LIMIT  (TX_RING_SIZE-TX_MULTICAST_RESERV)
-/* Hysteresis marking queue as no longer full. */
-#define TX_QUEUE_UNFULL (TX_QUEUE_LIMIT-4)
-
-/* Operational parameters that usually are not changed. */
-
-/* Time in jiffies before concluding the transmitter is hung. */
-#define TX_TIMEOUT		(2*HZ)
-/* Size of an pre-allocated Rx buffer: <Ethernet MTU> + slack.*/
-#define PKT_BUF_SZ		1536
-
-#include <linux/module.h>
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/mii.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/irq.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/rtnetlink.h>
-#include <linux/skbuff.h>
-#include <linux/ethtool.h>
-
-static int use_io;
-static int debug = -1;
-#define DEBUG_DEFAULT		(NETIF_MSG_DRV		| \
-				 NETIF_MSG_HW		| \
-				 NETIF_MSG_RX_ERR	| \
-				 NETIF_MSG_TX_ERR)
-#define DEBUG			((debug >= 0) ? (1<<debug)-1 : DEBUG_DEFAULT)
-
-
-MODULE_AUTHOR("Maintainer: Andrey V. Savochkin <saw@saw.sw.com.sg>");
-MODULE_DESCRIPTION("Intel i82557/i82558/i82559 PCI EtherExpressPro driver");
-MODULE_LICENSE("GPL");
-module_param(use_io, int, 0);
-module_param(debug, int, 0);
-module_param_array(options, int, NULL, 0);
-module_param_array(full_duplex, int, NULL, 0);
-module_param(congenb, int, 0);
-module_param(txfifo, int, 0);
-module_param(rxfifo, int, 0);
-module_param(txdmacount, int, 0);
-module_param(rxdmacount, int, 0);
-module_param(rx_copybreak, int, 0);
-module_param(max_interrupt_work, int, 0);
-module_param(multicast_filter_limit, int, 0);
-MODULE_PARM_DESC(debug, "debug level (0-6)");
-MODULE_PARM_DESC(options, "Bits 0-3: transceiver type, bit 4: full duplex, bit 5: 100Mbps");
-MODULE_PARM_DESC(full_duplex, "full duplex setting(s) (1)");
-MODULE_PARM_DESC(congenb, "Enable congestion control (1)");
-MODULE_PARM_DESC(txfifo, "Tx FIFO threshold in 4 byte units, (0-15)");
-MODULE_PARM_DESC(rxfifo, "Rx FIFO threshold in 4 byte units, (0-15)");
-MODULE_PARM_DESC(txdmacount, "Tx DMA burst length; 128 - disable (0-128)");
-MODULE_PARM_DESC(rxdmacount, "Rx DMA burst length; 128 - disable (0-128)");
-MODULE_PARM_DESC(rx_copybreak, "copy breakpoint for copy-only-tiny-frames");
-MODULE_PARM_DESC(max_interrupt_work, "maximum events handled per interrupt");
-MODULE_PARM_DESC(multicast_filter_limit, "maximum number of filtered multicast addresses");
-
-#define RUN_AT(x) (jiffies + (x))
-
-#define netdevice_start(dev)
-#define netdevice_stop(dev)
-#define netif_set_tx_timeout(dev, tf, tm) \
-								do { \
-									(dev)->tx_timeout = (tf); \
-									(dev)->watchdog_timeo = (tm); \
-								} while(0)
-
-
-
-/*
-				Theory of Operation
-
-I. Board Compatibility
-
-This device driver is designed for the Intel i82557 "Speedo3" chip, Intel's
-single-chip fast Ethernet controller for PCI, as used on the Intel
-EtherExpress Pro 100 adapter.
-
-II. Board-specific settings
-
-PCI bus devices are configured by the system at boot time, so no jumpers
-need to be set on the board.  The system BIOS should be set to assign the
-PCI INTA signal to an otherwise unused system IRQ line.  While it's
-possible to share PCI interrupt lines, it negatively impacts performance and
-only recent kernels support it.
-
-III. Driver operation
-
-IIIA. General
-The Speedo3 is very similar to other Intel network chips, that is to say
-"apparently designed on a different planet".  This chips retains the complex
-Rx and Tx descriptors and multiple buffers pointers as previous chips, but
-also has simplified Tx and Rx buffer modes.  This driver uses the "flexible"
-Tx mode, but in a simplified lower-overhead manner: it associates only a
-single buffer descriptor with each frame descriptor.
-
-Despite the extra space overhead in each receive skbuff, the driver must use
-the simplified Rx buffer mode to assure that only a single data buffer is
-associated with each RxFD. The driver implements this by reserving space
-for the Rx descriptor at the head of each Rx skbuff.
-
-The Speedo-3 has receive and command unit base addresses that are added to
-almost all descriptor pointers.  The driver sets these to zero, so that all
-pointer fields are absolute addresses.
-
-The System Control Block (SCB) of some previous Intel chips exists on the
-chip in both PCI I/O and memory space.  This driver uses the I/O space
-registers, but might switch to memory mapped mode to better support non-x86
-processors.
-
-IIIB. Transmit structure
-
-The driver must use the complex Tx command+descriptor mode in order to
-have a indirect pointer to the skbuff data section.  Each Tx command block
-(TxCB) is associated with two immediately appended Tx Buffer Descriptor
-(TxBD).  A fixed ring of these TxCB+TxBD pairs are kept as part of the
-speedo_private data structure for each adapter instance.
-
-The newer i82558 explicitly supports this structure, and can read the two
-TxBDs in the same PCI burst as the TxCB.
-
-This ring structure is used for all normal transmit packets, but the
-transmit packet descriptors aren't long enough for most non-Tx commands such
-as CmdConfigure.  This is complicated by the possibility that the chip has
-already loaded the link address in the previous descriptor.  So for these
-commands we convert the next free descriptor on the ring to a NoOp, and point
-that descriptor's link to the complex command.
-
-An additional complexity of these non-transmit commands are that they may be
-added asynchronous to the normal transmit queue, so we disable interrupts
-whenever the Tx descriptor ring is manipulated.
-
-A notable aspect of these special configure commands is that they do
-work with the normal Tx ring entry scavenge method.  The Tx ring scavenge
-is done at interrupt time using the 'dirty_tx' index, and checking for the
-command-complete bit.  While the setup frames may have the NoOp command on the
-Tx ring marked as complete, but not have completed the setup command, this
-is not a problem.  The tx_ring entry can be still safely reused, as the
-tx_skbuff[] entry is always empty for config_cmd and mc_setup frames.
-
-Commands may have bits set e.g. CmdSuspend in the command word to either
-suspend or stop the transmit/command unit.  This driver always flags the last
-command with CmdSuspend, erases the CmdSuspend in the previous command, and
-then issues a CU_RESUME.
-Note: Watch out for the potential race condition here: imagine
-	erasing the previous suspend
-		the chip processes the previous command
-		the chip processes the final command, and suspends
-	doing the CU_RESUME
-		the chip processes the next-yet-valid post-final-command.
-So blindly sending a CU_RESUME is only safe if we do it immediately after
-after erasing the previous CmdSuspend, without the possibility of an
-intervening delay.  Thus the resume command is always within the
-interrupts-disabled region.  This is a timing dependence, but handling this
-condition in a timing-independent way would considerably complicate the code.
-
-Note: In previous generation Intel chips, restarting the command unit was a
-notoriously slow process.  This is presumably no longer true.
-
-IIIC. Receive structure
-
-Because of the bus-master support on the Speedo3 this driver uses the new
-SKBUFF_RX_COPYBREAK scheme, rather than a fixed intermediate receive buffer.
-This scheme allocates full-sized skbuffs as receive buffers.  The value
-SKBUFF_RX_COPYBREAK is used as the copying breakpoint: it is chosen to
-trade-off the memory wasted by passing the full-sized skbuff to the queue
-layer for all frames vs. the copying cost of copying a frame to a
-correctly-sized skbuff.
-
-For small frames the copying cost is negligible (esp. considering that we
-are pre-loading the cache with immediately useful header information), so we
-allocate a new, minimally-sized skbuff.  For large frames the copying cost
-is non-trivial, and the larger copy might flush the cache of useful data, so
-we pass up the skbuff the packet was received into.
-
-IV. Notes
-
-Thanks to Steve Williams of Intel for arranging the non-disclosure agreement
-that stated that I could disclose the information.  But I still resent
-having to sign an Intel NDA when I'm helping Intel sell their own product!
-
-*/
-
-static int speedo_found1(struct pci_dev *pdev, void __iomem *ioaddr, int fnd_cnt, int acpi_idle_state);
-
-/* Offsets to the various registers.
-   All accesses need not be longword aligned. */
-enum speedo_offsets {
-	SCBStatus = 0, SCBCmd = 2,	/* Rx/Command Unit command and status. */
-	SCBIntmask = 3,
-	SCBPointer = 4,				/* General purpose pointer. */
-	SCBPort = 8,				/* Misc. commands and operands.  */
-	SCBflash = 12, SCBeeprom = 14, /* EEPROM and flash memory control. */
-	SCBCtrlMDI = 16,			/* MDI interface control. */
-	SCBEarlyRx = 20,			/* Early receive byte count. */
-};
-/* Commands that can be put in a command list entry. */
-enum commands {
-	CmdNOp = 0, CmdIASetup = 0x10000, CmdConfigure = 0x20000,
-	CmdMulticastList = 0x30000, CmdTx = 0x40000, CmdTDR = 0x50000,
-	CmdDump = 0x60000, CmdDiagnose = 0x70000,
-	CmdSuspend = 0x40000000,	/* Suspend after completion. */
-	CmdIntr = 0x20000000,		/* Interrupt after completion. */
-	CmdTxFlex = 0x00080000,		/* Use "Flexible mode" for CmdTx command. */
-};
-/* Clear CmdSuspend (1<<30) avoiding interference with the card access to the
-   status bits.  Previous driver versions used separate 16 bit fields for
-   commands and statuses.  --SAW
- */
-#if defined(__alpha__)
-# define clear_suspend(cmd)  clear_bit(30, &(cmd)->cmd_status);
-#else
-# define clear_suspend(cmd)  ((__le16 *)&(cmd)->cmd_status)[1] &= ~cpu_to_le16(1<<14)
-#endif
-
-enum SCBCmdBits {
-	SCBMaskCmdDone=0x8000, SCBMaskRxDone=0x4000, SCBMaskCmdIdle=0x2000,
-	SCBMaskRxSuspend=0x1000, SCBMaskEarlyRx=0x0800, SCBMaskFlowCtl=0x0400,
-	SCBTriggerIntr=0x0200, SCBMaskAll=0x0100,
-	/* The rest are Rx and Tx commands. */
-	CUStart=0x0010, CUResume=0x0020, CUStatsAddr=0x0040, CUShowStats=0x0050,
-	CUCmdBase=0x0060,	/* CU Base address (set to zero) . */
-	CUDumpStats=0x0070, /* Dump then reset stats counters. */
-	RxStart=0x0001, RxResume=0x0002, RxAbort=0x0004, RxAddrLoad=0x0006,
-	RxResumeNoResources=0x0007,
-};
-
-enum SCBPort_cmds {
-	PortReset=0, PortSelfTest=1, PortPartialReset=2, PortDump=3,
-};
-
-/* The Speedo3 Rx and Tx frame/buffer descriptors. */
-struct descriptor {			    /* A generic descriptor. */
-	volatile __le32 cmd_status;	/* All command and status fields. */
-	__le32 link;				    /* struct descriptor *  */
-	unsigned char params[0];
-};
-
-/* The Speedo3 Rx and Tx buffer descriptors. */
-struct RxFD {					/* Receive frame descriptor. */
-	volatile __le32 status;
-	__le32 link;					/* struct RxFD * */
-	__le32 rx_buf_addr;			/* void * */
-	__le32 count;
-} RxFD_ALIGNMENT;
-
-/* Selected elements of the Tx/RxFD.status word. */
-enum RxFD_bits {
-	RxComplete=0x8000, RxOK=0x2000,
-	RxErrCRC=0x0800, RxErrAlign=0x0400, RxErrTooBig=0x0200, RxErrSymbol=0x0010,
-	RxEth2Type=0x0020, RxNoMatch=0x0004, RxNoIAMatch=0x0002,
-	TxUnderrun=0x1000,  StatusComplete=0x8000,
-};
-
-#define CONFIG_DATA_SIZE 22
-struct TxFD {					/* Transmit frame descriptor set. */
-	__le32 status;
-	__le32 link;					/* void * */
-	__le32 tx_desc_addr;			/* Always points to the tx_buf_addr element. */
-	__le32 count;					/* # of TBD (=1), Tx start thresh., etc. */
-	/* This constitutes two "TBD" entries -- we only use one. */
-#define TX_DESCR_BUF_OFFSET 16
-	__le32 tx_buf_addr0;			/* void *, frame to be transmitted.  */
-	__le32 tx_buf_size0;			/* Length of Tx frame. */
-	__le32 tx_buf_addr1;			/* void *, frame to be transmitted.  */
-	__le32 tx_buf_size1;			/* Length of Tx frame. */
-	/* the structure must have space for at least CONFIG_DATA_SIZE starting
-	 * from tx_desc_addr field */
-};
-
-/* Multicast filter setting block.  --SAW */
-struct speedo_mc_block {
-	struct speedo_mc_block *next;
-	unsigned int tx;
-	dma_addr_t frame_dma;
-	unsigned int len;
-	struct descriptor frame __attribute__ ((__aligned__(16)));
-};
-
-/* Elements of the dump_statistics block. This block must be lword aligned. */
-struct speedo_stats {
-	__le32 tx_good_frames;
-	__le32 tx_coll16_errs;
-	__le32 tx_late_colls;
-	__le32 tx_underruns;
-	__le32 tx_lost_carrier;
-	__le32 tx_deferred;
-	__le32 tx_one_colls;
-	__le32 tx_multi_colls;
-	__le32 tx_total_colls;
-	__le32 rx_good_frames;
-	__le32 rx_crc_errs;
-	__le32 rx_align_errs;
-	__le32 rx_resource_errs;
-	__le32 rx_overrun_errs;
-	__le32 rx_colls_errs;
-	__le32 rx_runt_errs;
-	__le32 done_marker;
-};
-
-enum Rx_ring_state_bits {
-	RrNoMem=1, RrPostponed=2, RrNoResources=4, RrOOMReported=8,
-};
-
-/* Do not change the position (alignment) of the first few elements!
-   The later elements are grouped for cache locality.
-
-   Unfortunately, all the positions have been shifted since there.
-   A new re-alignment is required.  2000/03/06  SAW */
-struct speedo_private {
-    void __iomem *regs;
-	struct TxFD	*tx_ring;		/* Commands (usually CmdTxPacket). */
-	struct RxFD *rx_ringp[RX_RING_SIZE];	/* Rx descriptor, used as ring. */
-	/* The addresses of a Tx/Rx-in-place packets/buffers. */
-	struct sk_buff *tx_skbuff[TX_RING_SIZE];
-	struct sk_buff *rx_skbuff[RX_RING_SIZE];
-	/* Mapped addresses of the rings. */
-	dma_addr_t tx_ring_dma;
-#define TX_RING_ELEM_DMA(sp, n) ((sp)->tx_ring_dma + (n)*sizeof(struct TxFD))
-	dma_addr_t rx_ring_dma[RX_RING_SIZE];
-	struct descriptor *last_cmd;		/* Last command sent. */
-	unsigned int cur_tx, dirty_tx;		/* The ring entries to be free()ed. */
-	spinlock_t lock;			/* Group with Tx control cache line. */
-	u32 tx_threshold;			/* The value for txdesc.count. */
-	struct RxFD *last_rxf;			/* Last filled RX buffer. */
-	dma_addr_t last_rxf_dma;
-	unsigned int cur_rx, dirty_rx;		/* The next free ring entry */
-	long last_rx_time;			/* Last Rx, in jiffies, to handle Rx hang. */
-	struct net_device_stats stats;
-	struct speedo_stats *lstats;
-	dma_addr_t lstats_dma;
-	int chip_id;
-	struct pci_dev *pdev;
-	struct timer_list timer;		/* Media selection timer. */
-	struct speedo_mc_block *mc_setup_head;	/* Multicast setup frame list head. */
-	struct speedo_mc_block *mc_setup_tail;	/* Multicast setup frame list tail. */
-	long in_interrupt;			/* Word-aligned dev->interrupt */
-	unsigned char acpi_pwr;
-	signed char rx_mode;			/* Current PROMISC/ALLMULTI setting. */
-	unsigned int tx_full:1;			/* The Tx queue is full. */
-	unsigned int flow_ctrl:1;		/* Use 802.3x flow control. */
-	unsigned int rx_bug:1;			/* Work around receiver hang errata. */
-	unsigned char default_port:8;		/* Last dev->if_port value. */
-	unsigned char rx_ring_state;		/* RX ring status flags. */
-	unsigned short phy[2];			/* PHY media interfaces available. */
-	unsigned short partner;			/* Link partner caps. */
-	struct mii_if_info mii_if;		/* MII API hooks, info */
-	u32 msg_enable;				/* debug message level */
-};
-
-/* The parameters for a CmdConfigure operation.
-   There are so many options that it would be difficult to document each bit.
-   We mostly use the default or recommended settings. */
-static const char i82557_config_cmd[CONFIG_DATA_SIZE] = {
-	22, 0x08, 0, 0,  0, 0, 0x32, 0x03,  1, /* 1=Use MII  0=Use AUI */
-	0, 0x2E, 0,  0x60, 0,
-	0xf2, 0x48,   0, 0x40, 0xf2, 0x80, 		/* 0x40=Force full-duplex */
-	0x3f, 0x05, };
-static const char i82558_config_cmd[CONFIG_DATA_SIZE] = {
-	22, 0x08, 0, 1,  0, 0, 0x22, 0x03,  1, /* 1=Use MII  0=Use AUI */
-	0, 0x2E, 0,  0x60, 0x08, 0x88,
-	0x68, 0, 0x40, 0xf2, 0x84,		/* Disable FC */
-	0x31, 0x05, };
-
-/* PHY media interface chips. */
-static const char * const phys[] = {
-	"None", "i82553-A/B", "i82553-C", "i82503",
-	"DP83840", "80c240", "80c24", "i82555",
-	"unknown-8", "unknown-9", "DP83840A", "unknown-11",
-	"unknown-12", "unknown-13", "unknown-14", "unknown-15", };
-enum phy_chips { NonSuchPhy=0, I82553AB, I82553C, I82503, DP83840, S80C240,
-					 S80C24, I82555, DP83840A=10, };
-static const char is_mii[] = { 0, 1, 1, 0, 1, 1, 0, 1 };
-#define EE_READ_CMD		(6)
-
-static int eepro100_init_one(struct pci_dev *pdev,
-		const struct pci_device_id *ent);
-
-static int do_eeprom_cmd(void __iomem *ioaddr, int cmd, int cmd_len);
-static int mdio_read(struct net_device *dev, int phy_id, int location);
-static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
-static int speedo_open(struct net_device *dev);
-static void speedo_resume(struct net_device *dev);
-static void speedo_timer(unsigned long data);
-static void speedo_init_rx_ring(struct net_device *dev);
-static void speedo_tx_timeout(struct net_device *dev);
-static int speedo_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static void speedo_refill_rx_buffers(struct net_device *dev, int force);
-static int speedo_rx(struct net_device *dev);
-static void speedo_tx_buffer_gc(struct net_device *dev);
-static irqreturn_t speedo_interrupt(int irq, void *dev_instance);
-static int speedo_close(struct net_device *dev);
-static struct net_device_stats *speedo_get_stats(struct net_device *dev);
-static int speedo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static void set_rx_mode(struct net_device *dev);
-static void speedo_show_state(struct net_device *dev);
-static const struct ethtool_ops ethtool_ops;
-
-
-
-#ifdef honor_default_port
-/* Optional driver feature to allow forcing the transceiver setting.
-   Not recommended. */
-static int mii_ctrl[8] = { 0x3300, 0x3100, 0x0000, 0x0100,
-						   0x2000, 0x2100, 0x0400, 0x3100};
-#endif
-
-/* How to wait for the command unit to accept a command.
-   Typically this takes 0 ticks. */
-static inline unsigned char wait_for_cmd_done(struct net_device *dev,
-											  	struct speedo_private *sp)
-{
-	int wait = 1000;
-	void __iomem *cmd_ioaddr = sp->regs + SCBCmd;
-	unsigned char r;
-
-	do  {
-		udelay(1);
-		r = ioread8(cmd_ioaddr);
-	} while(r && --wait >= 0);
-
-	if (wait < 0)
-		printk(KERN_ALERT "%s: wait_for_cmd_done timeout!\n", dev->name);
-	return r;
-}
-
-static int __devinit eepro100_init_one (struct pci_dev *pdev,
-		const struct pci_device_id *ent)
-{
-	void __iomem *ioaddr;
-	int irq, pci_bar;
-	int acpi_idle_state = 0, pm;
-	static int cards_found /* = 0 */;
-	unsigned long pci_base;
-
-#ifndef MODULE
-	/* when built-in, we only print version if device is found */
-	static int did_version;
-	if (did_version++ == 0)
-		printk(version);
-#endif
-
-	/* save power state before pci_enable_device overwrites it */
-	pm = pci_find_capability(pdev, PCI_CAP_ID_PM);
-	if (pm) {
-		u16 pwr_command;
-		pci_read_config_word(pdev, pm + PCI_PM_CTRL, &pwr_command);
-		acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK;
-	}
-
-	if (pci_enable_device(pdev))
-		goto err_out_free_mmio_region;
-
-	pci_set_master(pdev);
-
-	if (!request_region(pci_resource_start(pdev, 1),
-			pci_resource_len(pdev, 1), "eepro100")) {
-		dev_err(&pdev->dev, "eepro100: cannot reserve I/O ports\n");
-		goto err_out_none;
-	}
-	if (!request_mem_region(pci_resource_start(pdev, 0),
-			pci_resource_len(pdev, 0), "eepro100")) {
-		dev_err(&pdev->dev, "eepro100: cannot reserve MMIO region\n");
-		goto err_out_free_pio_region;
-	}
-
-	irq = pdev->irq;
-	pci_bar = use_io ? 1 : 0;
-	pci_base = pci_resource_start(pdev, pci_bar);
-	if (DEBUG & NETIF_MSG_PROBE)
-		printk("Found Intel i82557 PCI Speedo at %#lx, IRQ %d.\n",
-		       pci_base, irq);
-
-	ioaddr = pci_iomap(pdev, pci_bar, 0);
-	if (!ioaddr) {
-		dev_err(&pdev->dev, "eepro100: cannot remap IO\n");
-		goto err_out_free_mmio_region;
-	}
-
-	if (speedo_found1(pdev, ioaddr, cards_found, acpi_idle_state) == 0)
-		cards_found++;
-	else
-		goto err_out_iounmap;
-
-	return 0;
-
-err_out_iounmap: ;
-	pci_iounmap(pdev, ioaddr);
-err_out_free_mmio_region:
-	release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
-err_out_free_pio_region:
-	release_region(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1));
-err_out_none:
-	return -ENODEV;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Polling 'interrupt' - used by things like netconsole to send skbs
- * without having to re-enable interrupts. It's not called while
- * the interrupt routine is executing.
- */
-
-static void poll_speedo (struct net_device *dev)
-{
-	/* disable_irq is not very nice, but with the funny lockless design
-	   we have no other choice. */
-	disable_irq(dev->irq);
-	speedo_interrupt (dev->irq, dev);
-	enable_irq(dev->irq);
-}
-#endif
-
-static int __devinit speedo_found1(struct pci_dev *pdev,
-		void __iomem *ioaddr, int card_idx, int acpi_idle_state)
-{
-	struct net_device *dev;
-	struct speedo_private *sp;
-	const char *product;
-	int i, option;
-	u16 eeprom[0x100];
-	int size;
-	void *tx_ring_space;
-	dma_addr_t tx_ring_dma;
-	DECLARE_MAC_BUF(mac);
-
-	size = TX_RING_SIZE * sizeof(struct TxFD) + sizeof(struct speedo_stats);
-	tx_ring_space = pci_alloc_consistent(pdev, size, &tx_ring_dma);
-	if (tx_ring_space == NULL)
-		return -1;
-
-	dev = alloc_etherdev(sizeof(struct speedo_private));
-	if (dev == NULL) {
-		printk(KERN_ERR "eepro100: Could not allocate ethernet device.\n");
-		pci_free_consistent(pdev, size, tx_ring_space, tx_ring_dma);
-		return -1;
-	}
-
-	SET_NETDEV_DEV(dev, &pdev->dev);
-
-	if (dev->mem_start > 0)
-		option = dev->mem_start;
-	else if (card_idx >= 0  &&  options[card_idx] >= 0)
-		option = options[card_idx];
-	else
-		option = 0;
-
-	rtnl_lock();
-	if (dev_alloc_name(dev, dev->name) < 0)
-		goto err_free_unlock;
-
-	/* Read the station address EEPROM before doing the reset.
-	   Nominally his should even be done before accepting the device, but
-	   then we wouldn't have a device name with which to report the error.
-	   The size test is for 6 bit vs. 8 bit address serial EEPROMs.
-	*/
-	{
-		void __iomem *iobase;
-		int read_cmd, ee_size;
-		u16 sum;
-		int j;
-
-		/* Use IO only to avoid postponed writes and satisfy EEPROM timing
-		   requirements. */
-		iobase = pci_iomap(pdev, 1, pci_resource_len(pdev, 1));
-		if (!iobase)
-			goto err_free_unlock;
-		if ((do_eeprom_cmd(iobase, EE_READ_CMD << 24, 27) & 0xffe0000)
-			== 0xffe0000) {
-			ee_size = 0x100;
-			read_cmd = EE_READ_CMD << 24;
-		} else {
-			ee_size = 0x40;
-			read_cmd = EE_READ_CMD << 22;
-		}
-
-		for (j = 0, i = 0, sum = 0; i < ee_size; i++) {
-			u16 value = do_eeprom_cmd(iobase, read_cmd | (i << 16), 27);
-			eeprom[i] = value;
-			sum += value;
-			if (i < 3) {
-				dev->dev_addr[j++] = value;
-				dev->dev_addr[j++] = value >> 8;
-			}
-		}
-		if (sum != 0xBABA)
-			printk(KERN_WARNING "%s: Invalid EEPROM checksum %#4.4x, "
-				   "check settings before activating this device!\n",
-				   dev->name, sum);
-		/* Don't  unregister_netdev(dev);  as the EEPro may actually be
-		   usable, especially if the MAC address is set later.
-		   On the other hand, it may be unusable if MDI data is corrupted. */
-
-		pci_iounmap(pdev, iobase);
-	}
-
-	/* Reset the chip: stop Tx and Rx processes and clear counters.
-	   This takes less than 10usec and will easily finish before the next
-	   action. */
-	iowrite32(PortReset, ioaddr + SCBPort);
-	ioread32(ioaddr + SCBPort);
-	udelay(10);
-
-	if (eeprom[3] & 0x0100)
-		product = "OEM i82557/i82558 10/100 Ethernet";
-	else
-		product = pci_name(pdev);
-
-	printk(KERN_INFO "%s: %s, %s, IRQ %d.\n", dev->name, product,
-		   print_mac(mac, dev->dev_addr), pdev->irq);
-
-	sp = netdev_priv(dev);
-
-	/* we must initialize this early, for mdio_{read,write} */
-	sp->regs = ioaddr;
-
-#if 1 || defined(kernel_bloat)
-	/* OK, this is pure kernel bloat.  I don't like it when other drivers
-	   waste non-pageable kernel space to emit similar messages, but I need
-	   them for bug reports. */
-	{
-		const char *connectors[] = {" RJ45", " BNC", " AUI", " MII"};
-		/* The self-test results must be paragraph aligned. */
-		volatile s32 *self_test_results;
-		int boguscnt = 16000;	/* Timeout for set-test. */
-		if ((eeprom[3] & 0x03) != 0x03)
-			printk(KERN_INFO "  Receiver lock-up bug exists -- enabling"
-				   " work-around.\n");
-		printk(KERN_INFO "  Board assembly %4.4x%2.2x-%3.3d, Physical"
-			   " connectors present:",
-			   eeprom[8], eeprom[9]>>8, eeprom[9] & 0xff);
-		for (i = 0; i < 4; i++)
-			if (eeprom[5] & (1<<i))
-				printk(connectors[i]);
-		printk("\n"KERN_INFO"  Primary interface chip %s PHY #%d.\n",
-			   phys[(eeprom[6]>>8)&15], eeprom[6] & 0x1f);
-		if (eeprom[7] & 0x0700)
-			printk(KERN_INFO "    Secondary interface chip %s.\n",
-				   phys[(eeprom[7]>>8)&7]);
-		if (((eeprom[6]>>8) & 0x3f) == DP83840
-			||  ((eeprom[6]>>8) & 0x3f) == DP83840A) {
-			int mdi_reg23 = mdio_read(dev, eeprom[6] & 0x1f, 23) | 0x0422;
-			if (congenb)
-			  mdi_reg23 |= 0x0100;
-			printk(KERN_INFO"  DP83840 specific setup, setting register 23 to %4.4x.\n",
-				   mdi_reg23);
-			mdio_write(dev, eeprom[6] & 0x1f, 23, mdi_reg23);
-		}
-		if ((option >= 0) && (option & 0x70)) {
-			printk(KERN_INFO "  Forcing %dMbs %s-duplex operation.\n",
-				   (option & 0x20 ? 100 : 10),
-				   (option & 0x10 ? "full" : "half"));
-			mdio_write(dev, eeprom[6] & 0x1f, MII_BMCR,
-					   ((option & 0x20) ? 0x2000 : 0) | 	/* 100mbps? */
-					   ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
-		}
-
-		/* Perform a system self-test. */
-		self_test_results = (s32*) ((((long) tx_ring_space) + 15) & ~0xf);
-		self_test_results[0] = 0;
-		self_test_results[1] = -1;
-		iowrite32(tx_ring_dma | PortSelfTest, ioaddr + SCBPort);
-		do {
-			udelay(10);
-		} while (self_test_results[1] == -1  &&  --boguscnt >= 0);
-
-		if (boguscnt < 0) {		/* Test optimized out. */
-			printk(KERN_ERR "Self test failed, status %8.8x:\n"
-				   KERN_ERR " Failure to initialize the i82557.\n"
-				   KERN_ERR " Verify that the card is a bus-master"
-				   " capable slot.\n",
-				   self_test_results[1]);
-		} else
-			printk(KERN_INFO "  General self-test: %s.\n"
-				   KERN_INFO "  Serial sub-system self-test: %s.\n"
-				   KERN_INFO "  Internal registers self-test: %s.\n"
-				   KERN_INFO "  ROM checksum self-test: %s (%#8.8x).\n",
-				   self_test_results[1] & 0x1000 ? "failed" : "passed",
-				   self_test_results[1] & 0x0020 ? "failed" : "passed",
-				   self_test_results[1] & 0x0008 ? "failed" : "passed",
-				   self_test_results[1] & 0x0004 ? "failed" : "passed",
-				   self_test_results[0]);
-	}
-#endif  /* kernel_bloat */
-
-	iowrite32(PortReset, ioaddr + SCBPort);
-	ioread32(ioaddr + SCBPort);
-	udelay(10);
-
-	/* Return the chip to its original power state. */
-	pci_set_power_state(pdev, acpi_idle_state);
-
-	pci_set_drvdata (pdev, dev);
-	SET_NETDEV_DEV(dev, &pdev->dev);
-
-	dev->irq = pdev->irq;
-
-	sp->pdev = pdev;
-	sp->msg_enable = DEBUG;
-	sp->acpi_pwr = acpi_idle_state;
-	sp->tx_ring = tx_ring_space;
-	sp->tx_ring_dma = tx_ring_dma;
-	sp->lstats = (struct speedo_stats *)(sp->tx_ring + TX_RING_SIZE);
-	sp->lstats_dma = TX_RING_ELEM_DMA(sp, TX_RING_SIZE);
-	init_timer(&sp->timer); /* used in ioctl() */
-	spin_lock_init(&sp->lock);
-
-	sp->mii_if.full_duplex = option >= 0 && (option & 0x10) ? 1 : 0;
-	if (card_idx >= 0) {
-		if (full_duplex[card_idx] >= 0)
-			sp->mii_if.full_duplex = full_duplex[card_idx];
-	}
-	sp->default_port = option >= 0 ? (option & 0x0f) : 0;
-
-	sp->phy[0] = eeprom[6];
-	sp->phy[1] = eeprom[7];
-
-	sp->mii_if.phy_id = eeprom[6] & 0x1f;
-	sp->mii_if.phy_id_mask = 0x1f;
-	sp->mii_if.reg_num_mask = 0x1f;
-	sp->mii_if.dev = dev;
-	sp->mii_if.mdio_read = mdio_read;
-	sp->mii_if.mdio_write = mdio_write;
-
-	sp->rx_bug = (eeprom[3] & 0x03) == 3 ? 0 : 1;
-	if (((pdev->device > 0x1030 && (pdev->device < 0x103F)))
-	    || (pdev->device == 0x2449) || (pdev->device == 0x2459)
-            || (pdev->device == 0x245D)) {
-	    	sp->chip_id = 1;
-	}
-
-	if (sp->rx_bug)
-		printk(KERN_INFO "  Receiver lock-up workaround activated.\n");
-
-	/* The Speedo-specific entries in the device structure. */
-	dev->open = &speedo_open;
-	dev->hard_start_xmit = &speedo_start_xmit;
-	netif_set_tx_timeout(dev, &speedo_tx_timeout, TX_TIMEOUT);
-	dev->stop = &speedo_close;
-	dev->get_stats = &speedo_get_stats;
-	dev->set_multicast_list = &set_rx_mode;
-	dev->do_ioctl = &speedo_ioctl;
-	SET_ETHTOOL_OPS(dev, &ethtool_ops);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = &poll_speedo;
-#endif
-
-	if (register_netdevice(dev))
-		goto err_free_unlock;
-	rtnl_unlock();
-
-	return 0;
-
- err_free_unlock:
-	rtnl_unlock();
-	free_netdev(dev);
-	return -1;
-}
-
-static void do_slow_command(struct net_device *dev, struct speedo_private *sp, int cmd)
-{
-	void __iomem *cmd_ioaddr = sp->regs + SCBCmd;
-	int wait = 0;
-	do
-		if (ioread8(cmd_ioaddr) == 0) break;
-	while(++wait <= 200);
-	if (wait > 100)
-		printk(KERN_ERR "Command %4.4x never accepted (%d polls)!\n",
-		       ioread8(cmd_ioaddr), wait);
-
-	iowrite8(cmd, cmd_ioaddr);
-
-	for (wait = 0; wait <= 100; wait++)
-		if (ioread8(cmd_ioaddr) == 0) return;
-	for (; wait <= 20000; wait++)
-		if (ioread8(cmd_ioaddr) == 0) return;
-		else udelay(1);
-	printk(KERN_ERR "Command %4.4x was not accepted after %d polls!"
-	       "  Current status %8.8x.\n",
-	       cmd, wait, ioread32(sp->regs + SCBStatus));
-}
-
-/* Serial EEPROM section.
-   A "bit" grungy, but we work our way through bit-by-bit :->. */
-/*  EEPROM_Ctrl bits. */
-#define EE_SHIFT_CLK	0x01	/* EEPROM shift clock. */
-#define EE_CS			0x02	/* EEPROM chip select. */
-#define EE_DATA_WRITE	0x04	/* EEPROM chip data in. */
-#define EE_DATA_READ	0x08	/* EEPROM chip data out. */
-#define EE_ENB			(0x4800 | EE_CS)
-#define EE_WRITE_0		0x4802
-#define EE_WRITE_1		0x4806
-#define EE_OFFSET		SCBeeprom
-
-/* The fixes for the code were kindly provided by Dragan Stancevic
-   <visitor@valinux.com> to strictly follow Intel specifications of EEPROM
-   access timing.
-   The publicly available sheet 64486302 (sec. 3.1) specifies 1us access
-   interval for serial EEPROM.  However, it looks like that there is an
-   additional requirement dictating larger udelay's in the code below.
-   2000/05/24  SAW */
-static int __devinit do_eeprom_cmd(void __iomem *ioaddr, int cmd, int cmd_len)
-{
-	unsigned retval = 0;
-	void __iomem *ee_addr = ioaddr + SCBeeprom;
-
-	iowrite16(EE_ENB, ee_addr); udelay(2);
-	iowrite16(EE_ENB | EE_SHIFT_CLK, ee_addr); udelay(2);
-
-	/* Shift the command bits out. */
-	do {
-		short dataval = (cmd & (1 << cmd_len)) ? EE_WRITE_1 : EE_WRITE_0;
-		iowrite16(dataval, ee_addr); udelay(2);
-		iowrite16(dataval | EE_SHIFT_CLK, ee_addr); udelay(2);
-		retval = (retval << 1) | ((ioread16(ee_addr) & EE_DATA_READ) ? 1 : 0);
-	} while (--cmd_len >= 0);
-	iowrite16(EE_ENB, ee_addr); udelay(2);
-
-	/* Terminate the EEPROM access. */
-	iowrite16(EE_ENB & ~EE_CS, ee_addr);
-	return retval;
-}
-
-static int mdio_read(struct net_device *dev, int phy_id, int location)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	void __iomem *ioaddr = sp->regs;
-	int val, boguscnt = 64*10;		/* <64 usec. to complete, typ 27 ticks */
-	iowrite32(0x08000000 | (location<<16) | (phy_id<<21), ioaddr + SCBCtrlMDI);
-	do {
-		val = ioread32(ioaddr + SCBCtrlMDI);
-		if (--boguscnt < 0) {
-			printk(KERN_ERR " mdio_read() timed out with val = %8.8x.\n", val);
-			break;
-		}
-	} while (! (val & 0x10000000));
-	return val & 0xffff;
-}
-
-static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	void __iomem *ioaddr = sp->regs;
-	int val, boguscnt = 64*10;		/* <64 usec. to complete, typ 27 ticks */
-	iowrite32(0x04000000 | (location<<16) | (phy_id<<21) | value,
-		 ioaddr + SCBCtrlMDI);
-	do {
-		val = ioread32(ioaddr + SCBCtrlMDI);
-		if (--boguscnt < 0) {
-			printk(KERN_ERR" mdio_write() timed out with val = %8.8x.\n", val);
-			break;
-		}
-	} while (! (val & 0x10000000));
-}
-
-static int
-speedo_open(struct net_device *dev)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	void __iomem *ioaddr = sp->regs;
-	int retval;
-
-	if (netif_msg_ifup(sp))
-		printk(KERN_DEBUG "%s: speedo_open() irq %d.\n", dev->name, dev->irq);
-
-	pci_set_power_state(sp->pdev, PCI_D0);
-
-	/* Set up the Tx queue early.. */
-	sp->cur_tx = 0;
-	sp->dirty_tx = 0;
-	sp->last_cmd = NULL;
-	sp->tx_full = 0;
-	sp->in_interrupt = 0;
-
-	/* .. we can safely take handler calls during init. */
-	retval = request_irq(dev->irq, &speedo_interrupt, IRQF_SHARED, dev->name, dev);
-	if (retval) {
-		return retval;
-	}
-
-	dev->if_port = sp->default_port;
-
-#ifdef oh_no_you_dont_unless_you_honour_the_options_passed_in_to_us
-	/* Retrigger negotiation to reset previous errors. */
-	if ((sp->phy[0] & 0x8000) == 0) {
-		int phy_addr = sp->phy[0] & 0x1f ;
-		/* Use 0x3300 for restarting NWay, other values to force xcvr:
-		   0x0000 10-HD
-		   0x0100 10-FD
-		   0x2000 100-HD
-		   0x2100 100-FD
-		*/
-#ifdef honor_default_port
-		mdio_write(dev, phy_addr, MII_BMCR, mii_ctrl[dev->default_port & 7]);
-#else
-		mdio_write(dev, phy_addr, MII_BMCR, 0x3300);
-#endif
-	}
-#endif
-
-	speedo_init_rx_ring(dev);
-
-	/* Fire up the hardware. */
-	iowrite16(SCBMaskAll, ioaddr + SCBCmd);
-	speedo_resume(dev);
-
-	netdevice_start(dev);
-	netif_start_queue(dev);
-
-	/* Setup the chip and configure the multicast list. */
-	sp->mc_setup_head = NULL;
-	sp->mc_setup_tail = NULL;
-	sp->flow_ctrl = sp->partner = 0;
-	sp->rx_mode = -1;			/* Invalid -> always reset the mode. */
-	set_rx_mode(dev);
-	if ((sp->phy[0] & 0x8000) == 0)
-		sp->mii_if.advertising = mdio_read(dev, sp->phy[0] & 0x1f, MII_ADVERTISE);
-
-	mii_check_link(&sp->mii_if);
-
-	if (netif_msg_ifup(sp)) {
-		printk(KERN_DEBUG "%s: Done speedo_open(), status %8.8x.\n",
-			   dev->name, ioread16(ioaddr + SCBStatus));
-	}
-
-	/* Set the timer.  The timer serves a dual purpose:
-	   1) to monitor the media interface (e.g. link beat) and perhaps switch
-	   to an alternate media type
-	   2) to monitor Rx activity, and restart the Rx process if the receiver
-	   hangs. */
-	sp->timer.expires = RUN_AT((24*HZ)/10); 			/* 2.4 sec. */
-	sp->timer.data = (unsigned long)dev;
-	sp->timer.function = &speedo_timer;					/* timer handler */
-	add_timer(&sp->timer);
-
-	/* No need to wait for the command unit to accept here. */
-	if ((sp->phy[0] & 0x8000) == 0)
-		mdio_read(dev, sp->phy[0] & 0x1f, MII_BMCR);
-
-	return 0;
-}
-
-/* Start the chip hardware after a full reset. */
-static void speedo_resume(struct net_device *dev)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	void __iomem *ioaddr = sp->regs;
-
-	/* Start with a Tx threshold of 256 (0x..20.... 8 byte units). */
-	sp->tx_threshold = 0x01208000;
-
-	/* Set the segment registers to '0'. */
-	if (wait_for_cmd_done(dev, sp) != 0) {
-		iowrite32(PortPartialReset, ioaddr + SCBPort);
-		udelay(10);
-	}
-
-        iowrite32(0, ioaddr + SCBPointer);
-        ioread32(ioaddr + SCBPointer);			/* Flush to PCI. */
-        udelay(10);			/* Bogus, but it avoids the bug. */
-
-        /* Note: these next two operations can take a while. */
-        do_slow_command(dev, sp, RxAddrLoad);
-        do_slow_command(dev, sp, CUCmdBase);
-
-	/* Load the statistics block and rx ring addresses. */
-	iowrite32(sp->lstats_dma, ioaddr + SCBPointer);
-	ioread32(ioaddr + SCBPointer);			/* Flush to PCI */
-
-	iowrite8(CUStatsAddr, ioaddr + SCBCmd);
-	sp->lstats->done_marker = 0;
-	wait_for_cmd_done(dev, sp);
-
-	if (sp->rx_ringp[sp->cur_rx % RX_RING_SIZE] == NULL) {
-		if (netif_msg_rx_err(sp))
-			printk(KERN_DEBUG "%s: NULL cur_rx in speedo_resume().\n",
-					dev->name);
-	} else {
-		iowrite32(sp->rx_ring_dma[sp->cur_rx % RX_RING_SIZE],
-			 ioaddr + SCBPointer);
-		ioread32(ioaddr + SCBPointer);		/* Flush to PCI */
-	}
-
-	/* Note: RxStart should complete instantly. */
-	do_slow_command(dev, sp, RxStart);
-	do_slow_command(dev, sp, CUDumpStats);
-
-	/* Fill the first command with our physical address. */
-	{
-		struct descriptor *ias_cmd;
-
-		ias_cmd =
-			(struct descriptor *)&sp->tx_ring[sp->cur_tx++ % TX_RING_SIZE];
-		/* Avoid a bug(?!) here by marking the command already completed. */
-		ias_cmd->cmd_status = cpu_to_le32((CmdSuspend | CmdIASetup) | 0xa000);
-		ias_cmd->link =
-			cpu_to_le32(TX_RING_ELEM_DMA(sp, sp->cur_tx % TX_RING_SIZE));
-		memcpy(ias_cmd->params, dev->dev_addr, 6);
-		if (sp->last_cmd)
-			clear_suspend(sp->last_cmd);
-		sp->last_cmd = ias_cmd;
-	}
-
-	/* Start the chip's Tx process and unmask interrupts. */
-	iowrite32(TX_RING_ELEM_DMA(sp, sp->dirty_tx % TX_RING_SIZE),
-		 ioaddr + SCBPointer);
-	/* We are not ACK-ing FCP and ER in the interrupt handler yet so they should
-	   remain masked --Dragan */
-	iowrite16(CUStart | SCBMaskEarlyRx | SCBMaskFlowCtl, ioaddr + SCBCmd);
-}
-
-/*
- * Sometimes the receiver stops making progress.  This routine knows how to
- * get it going again, without losing packets or being otherwise nasty like
- * a chip reset would be.  Previously the driver had a whole sequence
- * of if RxSuspended, if it's no buffers do one thing, if it's no resources,
- * do another, etc.  But those things don't really matter.  Separate logic
- * in the ISR provides for allocating buffers--the other half of operation
- * is just making sure the receiver is active.  speedo_rx_soft_reset does that.
- * This problem with the old, more involved algorithm is shown up under
- * ping floods on the order of 60K packets/second on a 100Mbps fdx network.
- */
-static void
-speedo_rx_soft_reset(struct net_device *dev)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	struct RxFD *rfd;
-	void __iomem *ioaddr;
-
-	ioaddr = sp->regs;
-	if (wait_for_cmd_done(dev, sp) != 0) {
-		printk("%s: previous command stalled\n", dev->name);
-		return;
-	}
-	/*
-	* Put the hardware into a known state.
-	*/
-	iowrite8(RxAbort, ioaddr + SCBCmd);
-
-	rfd = sp->rx_ringp[sp->cur_rx % RX_RING_SIZE];
-
-	rfd->rx_buf_addr = cpu_to_le32(0xffffffff);
-
-	if (wait_for_cmd_done(dev, sp) != 0) {
-		printk("%s: RxAbort command stalled\n", dev->name);
-		return;
-	}
-	iowrite32(sp->rx_ring_dma[sp->cur_rx % RX_RING_SIZE],
-		ioaddr + SCBPointer);
-	iowrite8(RxStart, ioaddr + SCBCmd);
-}
-
-
-/* Media monitoring and control. */
-static void speedo_timer(unsigned long data)
-{
-	struct net_device *dev = (struct net_device *)data;
-	struct speedo_private *sp = netdev_priv(dev);
-	void __iomem *ioaddr = sp->regs;
-	int phy_num = sp->phy[0] & 0x1f;
-
-	/* We have MII and lost link beat. */
-	if ((sp->phy[0] & 0x8000) == 0) {
-		int partner = mdio_read(dev, phy_num, MII_LPA);
-		if (partner != sp->partner) {
-			int flow_ctrl = sp->mii_if.advertising & partner & 0x0400 ? 1 : 0;
-			if (netif_msg_link(sp)) {
-				printk(KERN_DEBUG "%s: Link status change.\n", dev->name);
-				printk(KERN_DEBUG "%s: Old partner %x, new %x, adv %x.\n",
-					   dev->name, sp->partner, partner, sp->mii_if.advertising);
-			}
-			sp->partner = partner;
-			if (flow_ctrl != sp->flow_ctrl) {
-				sp->flow_ctrl = flow_ctrl;
-				sp->rx_mode = -1;	/* Trigger a reload. */
-			}
-		}
-	}
-	mii_check_link(&sp->mii_if);
-	if (netif_msg_timer(sp)) {
-		printk(KERN_DEBUG "%s: Media control tick, status %4.4x.\n",
-			   dev->name, ioread16(ioaddr + SCBStatus));
-	}
-	if (sp->rx_mode < 0  ||
-		(sp->rx_bug  && jiffies - sp->last_rx_time > 2*HZ)) {
-		/* We haven't received a packet in a Long Time.  We might have been
-		   bitten by the receiver hang bug.  This can be cleared by sending
-		   a set multicast list command. */
-		if (netif_msg_timer(sp))
-			printk(KERN_DEBUG "%s: Sending a multicast list set command"
-				   " from a timer routine,"
-				   " m=%d, j=%ld, l=%ld.\n",
-				   dev->name, sp->rx_mode, jiffies, sp->last_rx_time);
-		set_rx_mode(dev);
-	}
-	/* We must continue to monitor the media. */
-	sp->timer.expires = RUN_AT(2*HZ); 			/* 2.0 sec. */
-	add_timer(&sp->timer);
-}
-
-static void speedo_show_state(struct net_device *dev)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	int i;
-
-	if (netif_msg_pktdata(sp)) {
-		printk(KERN_DEBUG "%s: Tx ring dump,  Tx queue %u / %u:\n",
-		    dev->name, sp->cur_tx, sp->dirty_tx);
-		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(KERN_DEBUG "%s:  %c%c%2d %8.8x.\n", dev->name,
-			    i == sp->dirty_tx % TX_RING_SIZE ? '*' : ' ',
-			    i == sp->cur_tx % TX_RING_SIZE ? '=' : ' ',
-			    i, sp->tx_ring[i].status);
-
-		printk(KERN_DEBUG "%s: Printing Rx ring"
-		    " (next to receive into %u, dirty index %u).\n",
-		    dev->name, sp->cur_rx, sp->dirty_rx);
-		for (i = 0; i < RX_RING_SIZE; i++)
-			printk(KERN_DEBUG "%s: %c%c%c%2d %8.8x.\n", dev->name,
-			    sp->rx_ringp[i] == sp->last_rxf ? 'l' : ' ',
-			    i == sp->dirty_rx % RX_RING_SIZE ? '*' : ' ',
-			    i == sp->cur_rx % RX_RING_SIZE ? '=' : ' ',
-			    i, (sp->rx_ringp[i] != NULL) ?
-			    (unsigned)sp->rx_ringp[i]->status : 0);
-	}
-
-#if 0
-	{
-		void __iomem *ioaddr = sp->regs;
-		int phy_num = sp->phy[0] & 0x1f;
-		for (i = 0; i < 16; i++) {
-			/* FIXME: what does it mean?  --SAW */
-			if (i == 6) i = 21;
-			printk(KERN_DEBUG "%s:  PHY index %d register %d is %4.4x.\n",
-				   dev->name, phy_num, i, mdio_read(dev, phy_num, i));
-		}
-	}
-#endif
-
-}
-
-/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
-static void
-speedo_init_rx_ring(struct net_device *dev)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	struct RxFD *rxf, *last_rxf = NULL;
-	dma_addr_t last_rxf_dma = 0 /* to shut up the compiler */;
-	int i;
-
-	sp->cur_rx = 0;
-
-	for (i = 0; i < RX_RING_SIZE; i++) {
-		struct sk_buff *skb;
-		skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
-		if (skb)
-			rx_align(skb);        /* Align IP on 16 byte boundary */
-		sp->rx_skbuff[i] = skb;
-		if (skb == NULL)
-			break;			/* OK.  Just initially short of Rx bufs. */
-		skb->dev = dev;			/* Mark as being used by this device. */
-		rxf = (struct RxFD *)skb->data;
-		sp->rx_ringp[i] = rxf;
-		sp->rx_ring_dma[i] =
-			pci_map_single(sp->pdev, rxf,
-					PKT_BUF_SZ + sizeof(struct RxFD), PCI_DMA_BIDIRECTIONAL);
-		skb_reserve(skb, sizeof(struct RxFD));
-		if (last_rxf) {
-			last_rxf->link = cpu_to_le32(sp->rx_ring_dma[i]);
-			pci_dma_sync_single_for_device(sp->pdev, last_rxf_dma,
-										   sizeof(struct RxFD), PCI_DMA_TODEVICE);
-		}
-		last_rxf = rxf;
-		last_rxf_dma = sp->rx_ring_dma[i];
-		rxf->status = cpu_to_le32(0x00000001);	/* '1' is flag value only. */
-		rxf->link = 0;						/* None yet. */
-		/* This field unused by i82557. */
-		rxf->rx_buf_addr = cpu_to_le32(0xffffffff);
-		rxf->count = cpu_to_le32(PKT_BUF_SZ << 16);
-		pci_dma_sync_single_for_device(sp->pdev, sp->rx_ring_dma[i],
-									   sizeof(struct RxFD), PCI_DMA_TODEVICE);
-	}
-	sp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
-	/* Mark the last entry as end-of-list. */
-	last_rxf->status = cpu_to_le32(0xC0000002);	/* '2' is flag value only. */
-	pci_dma_sync_single_for_device(sp->pdev, sp->rx_ring_dma[RX_RING_SIZE-1],
-								   sizeof(struct RxFD), PCI_DMA_TODEVICE);
-	sp->last_rxf = last_rxf;
-	sp->last_rxf_dma = last_rxf_dma;
-}
-
-static void speedo_purge_tx(struct net_device *dev)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	int entry;
-
-	while ((int)(sp->cur_tx - sp->dirty_tx) > 0) {
-		entry = sp->dirty_tx % TX_RING_SIZE;
-		if (sp->tx_skbuff[entry]) {
-			sp->stats.tx_errors++;
-			pci_unmap_single(sp->pdev,
-					le32_to_cpu(sp->tx_ring[entry].tx_buf_addr0),
-					sp->tx_skbuff[entry]->len, PCI_DMA_TODEVICE);
-			dev_kfree_skb_irq(sp->tx_skbuff[entry]);
-			sp->tx_skbuff[entry] = NULL;
-		}
-		sp->dirty_tx++;
-	}
-	while (sp->mc_setup_head != NULL) {
-		struct speedo_mc_block *t;
-		if (netif_msg_tx_err(sp))
-			printk(KERN_DEBUG "%s: freeing mc frame.\n", dev->name);
-		pci_unmap_single(sp->pdev, sp->mc_setup_head->frame_dma,
-				sp->mc_setup_head->len, PCI_DMA_TODEVICE);
-		t = sp->mc_setup_head->next;
-		kfree(sp->mc_setup_head);
-		sp->mc_setup_head = t;
-	}
-	sp->mc_setup_tail = NULL;
-	sp->tx_full = 0;
-	netif_wake_queue(dev);
-}
-
-static void reset_mii(struct net_device *dev)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-
-	/* Reset the MII transceiver, suggested by Fred Young @ scalable.com. */
-	if ((sp->phy[0] & 0x8000) == 0) {
-		int phy_addr = sp->phy[0] & 0x1f;
-		int advertising = mdio_read(dev, phy_addr, MII_ADVERTISE);
-		int mii_bmcr = mdio_read(dev, phy_addr, MII_BMCR);
-		mdio_write(dev, phy_addr, MII_BMCR, 0x0400);
-		mdio_write(dev, phy_addr, MII_BMSR, 0x0000);
-		mdio_write(dev, phy_addr, MII_ADVERTISE, 0x0000);
-		mdio_write(dev, phy_addr, MII_BMCR, 0x8000);
-#ifdef honor_default_port
-		mdio_write(dev, phy_addr, MII_BMCR, mii_ctrl[dev->default_port & 7]);
-#else
-		mdio_read(dev, phy_addr, MII_BMCR);
-		mdio_write(dev, phy_addr, MII_BMCR, mii_bmcr);
-		mdio_write(dev, phy_addr, MII_ADVERTISE, advertising);
-#endif
-	}
-}
-
-static void speedo_tx_timeout(struct net_device *dev)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	void __iomem *ioaddr = sp->regs;
-	int status = ioread16(ioaddr + SCBStatus);
-	unsigned long flags;
-
-	if (netif_msg_tx_err(sp)) {
-		printk(KERN_WARNING "%s: Transmit timed out: status %4.4x "
-		   " %4.4x at %d/%d command %8.8x.\n",
-		   dev->name, status, ioread16(ioaddr + SCBCmd),
-		   sp->dirty_tx, sp->cur_tx,
-		   sp->tx_ring[sp->dirty_tx % TX_RING_SIZE].status);
-
-	}
-	speedo_show_state(dev);
-#if 0
-	if ((status & 0x00C0) != 0x0080
-		&&  (status & 0x003C) == 0x0010) {
-		/* Only the command unit has stopped. */
-		printk(KERN_WARNING "%s: Trying to restart the transmitter...\n",
-			   dev->name);
-		iowrite32(TX_RING_ELEM_DMA(sp, dirty_tx % TX_RING_SIZE]),
-			 ioaddr + SCBPointer);
-		iowrite16(CUStart, ioaddr + SCBCmd);
-		reset_mii(dev);
-	} else {
-#else
-	{
-#endif
-		del_timer_sync(&sp->timer);
-		/* Reset the Tx and Rx units. */
-		iowrite32(PortReset, ioaddr + SCBPort);
-		/* We may get spurious interrupts here.  But I don't think that they
-		   may do much harm.  1999/12/09 SAW */
-		udelay(10);
-		/* Disable interrupts. */
-		iowrite16(SCBMaskAll, ioaddr + SCBCmd);
-		synchronize_irq(dev->irq);
-		speedo_tx_buffer_gc(dev);
-		/* Free as much as possible.
-		   It helps to recover from a hang because of out-of-memory.
-		   It also simplifies speedo_resume() in case TX ring is full or
-		   close-to-be full. */
-		speedo_purge_tx(dev);
-		speedo_refill_rx_buffers(dev, 1);
-		spin_lock_irqsave(&sp->lock, flags);
-		speedo_resume(dev);
-		sp->rx_mode = -1;
-		dev->trans_start = jiffies;
-		spin_unlock_irqrestore(&sp->lock, flags);
-		set_rx_mode(dev); /* it takes the spinlock itself --SAW */
-		/* Reset MII transceiver.  Do it before starting the timer to serialize
-		   mdio_xxx operations.  Yes, it's a paranoya :-)  2000/05/09 SAW */
-		reset_mii(dev);
-		sp->timer.expires = RUN_AT(2*HZ);
-		add_timer(&sp->timer);
-	}
-	return;
-}
-
-static int
-speedo_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	void __iomem *ioaddr = sp->regs;
-	int entry;
-
-	/* Prevent interrupts from changing the Tx ring from underneath us. */
-	unsigned long flags;
-
-	spin_lock_irqsave(&sp->lock, flags);
-
-	/* Check if there are enough space. */
-	if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
-		printk(KERN_ERR "%s: incorrect tbusy state, fixed.\n", dev->name);
-		netif_stop_queue(dev);
-		sp->tx_full = 1;
-		spin_unlock_irqrestore(&sp->lock, flags);
-		return 1;
-	}
-
-	/* Calculate the Tx descriptor entry. */
-	entry = sp->cur_tx++ % TX_RING_SIZE;
-
-	sp->tx_skbuff[entry] = skb;
-	sp->tx_ring[entry].status =
-		cpu_to_le32(CmdSuspend | CmdTx | CmdTxFlex);
-	if (!(entry & ((TX_RING_SIZE>>2)-1)))
-		sp->tx_ring[entry].status |= cpu_to_le32(CmdIntr);
-	sp->tx_ring[entry].link =
-		cpu_to_le32(TX_RING_ELEM_DMA(sp, sp->cur_tx % TX_RING_SIZE));
-	sp->tx_ring[entry].tx_desc_addr =
-		cpu_to_le32(TX_RING_ELEM_DMA(sp, entry) + TX_DESCR_BUF_OFFSET);
-	/* The data region is always in one buffer descriptor. */
-	sp->tx_ring[entry].count = cpu_to_le32(sp->tx_threshold);
-	sp->tx_ring[entry].tx_buf_addr0 =
-		cpu_to_le32(pci_map_single(sp->pdev, skb->data,
-					   skb->len, PCI_DMA_TODEVICE));
-	sp->tx_ring[entry].tx_buf_size0 = cpu_to_le32(skb->len);
-
-	/* workaround for hardware bug on 10 mbit half duplex */
-
-	if ((sp->partner == 0) && (sp->chip_id == 1)) {
-		wait_for_cmd_done(dev, sp);
-		iowrite8(0 , ioaddr + SCBCmd);
-		udelay(1);
-	}
-
-	/* Trigger the command unit resume. */
-	wait_for_cmd_done(dev, sp);
-	clear_suspend(sp->last_cmd);
-	/* We want the time window between clearing suspend flag on the previous
-	   command and resuming CU to be as small as possible.
-	   Interrupts in between are very undesired.  --SAW */
-	iowrite8(CUResume, ioaddr + SCBCmd);
-	sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
-
-	/* Leave room for set_rx_mode(). If there is no more space than reserved
-	   for multicast filter mark the ring as full. */
-	if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
-		netif_stop_queue(dev);
-		sp->tx_full = 1;
-	}
-
-	spin_unlock_irqrestore(&sp->lock, flags);
-
-	dev->trans_start = jiffies;
-
-	return 0;
-}
-
-static void speedo_tx_buffer_gc(struct net_device *dev)
-{
-	unsigned int dirty_tx;
-	struct speedo_private *sp = netdev_priv(dev);
-
-	dirty_tx = sp->dirty_tx;
-	while ((int)(sp->cur_tx - dirty_tx) > 0) {
-		int entry = dirty_tx % TX_RING_SIZE;
-		int status = le32_to_cpu(sp->tx_ring[entry].status);
-
-		if (netif_msg_tx_done(sp))
-			printk(KERN_DEBUG " scavenge candidate %d status %4.4x.\n",
-				   entry, status);
-		if ((status & StatusComplete) == 0)
-			break;			/* It still hasn't been processed. */
-		if (status & TxUnderrun)
-			if (sp->tx_threshold < 0x01e08000) {
-				if (netif_msg_tx_err(sp))
-					printk(KERN_DEBUG "%s: TX underrun, threshold adjusted.\n",
-						   dev->name);
-				sp->tx_threshold += 0x00040000;
-			}
-		/* Free the original skb. */
-		if (sp->tx_skbuff[entry]) {
-			sp->stats.tx_packets++;	/* Count only user packets. */
-			sp->stats.tx_bytes += sp->tx_skbuff[entry]->len;
-			pci_unmap_single(sp->pdev,
-					le32_to_cpu(sp->tx_ring[entry].tx_buf_addr0),
-					sp->tx_skbuff[entry]->len, PCI_DMA_TODEVICE);
-			dev_kfree_skb_irq(sp->tx_skbuff[entry]);
-			sp->tx_skbuff[entry] = NULL;
-		}
-		dirty_tx++;
-	}
-
-	if (netif_msg_tx_err(sp) && (int)(sp->cur_tx - dirty_tx) > TX_RING_SIZE) {
-		printk(KERN_ERR "out-of-sync dirty pointer, %d vs. %d,"
-			   " full=%d.\n",
-			   dirty_tx, sp->cur_tx, sp->tx_full);
-		dirty_tx += TX_RING_SIZE;
-	}
-
-	while (sp->mc_setup_head != NULL
-		   && (int)(dirty_tx - sp->mc_setup_head->tx - 1) > 0) {
-		struct speedo_mc_block *t;
-		if (netif_msg_tx_err(sp))
-			printk(KERN_DEBUG "%s: freeing mc frame.\n", dev->name);
-		pci_unmap_single(sp->pdev, sp->mc_setup_head->frame_dma,
-				sp->mc_setup_head->len, PCI_DMA_TODEVICE);
-		t = sp->mc_setup_head->next;
-		kfree(sp->mc_setup_head);
-		sp->mc_setup_head = t;
-	}
-	if (sp->mc_setup_head == NULL)
-		sp->mc_setup_tail = NULL;
-
-	sp->dirty_tx = dirty_tx;
-}
-
-/* The interrupt handler does all of the Rx thread work and cleans up
-   after the Tx thread. */
-static irqreturn_t speedo_interrupt(int irq, void *dev_instance)
-{
-	struct net_device *dev = (struct net_device *)dev_instance;
-	struct speedo_private *sp;
-	void __iomem *ioaddr;
-	long boguscnt = max_interrupt_work;
-	unsigned short status;
-	unsigned int handled = 0;
-
-	sp = netdev_priv(dev);
-	ioaddr = sp->regs;
-
-#ifndef final_version
-	/* A lock to prevent simultaneous entry on SMP machines. */
-	if (test_and_set_bit(0, (void*)&sp->in_interrupt)) {
-		printk(KERN_ERR"%s: SMP simultaneous entry of an interrupt handler.\n",
-			   dev->name);
-		sp->in_interrupt = 0;	/* Avoid halting machine. */
-		return IRQ_NONE;
-	}
-#endif
-
-	do {
-		status = ioread16(ioaddr + SCBStatus);
-		/* Acknowledge all of the current interrupt sources ASAP. */
-		/* Will change from 0xfc00 to 0xff00 when we start handling
-		   FCP and ER interrupts --Dragan */
-		iowrite16(status & 0xfc00, ioaddr + SCBStatus);
-
-		if (netif_msg_intr(sp))
-			printk(KERN_DEBUG "%s: interrupt  status=%#4.4x.\n",
-				   dev->name, status);
-
-		if ((status & 0xfc00) == 0)
-			break;
-		handled = 1;
-
-
-		if ((status & 0x5000) ||	/* Packet received, or Rx error. */
-			(sp->rx_ring_state&(RrNoMem|RrPostponed)) == RrPostponed)
-									/* Need to gather the postponed packet. */
-			speedo_rx(dev);
-
-		/* Always check if all rx buffers are allocated.  --SAW */
-		speedo_refill_rx_buffers(dev, 0);
-
-		spin_lock(&sp->lock);
-		/*
-		 * The chip may have suspended reception for various reasons.
-		 * Check for that, and re-prime it should this be the case.
-		 */
-		switch ((status >> 2) & 0xf) {
-		case 0: /* Idle */
-			break;
-		case 1:	/* Suspended */
-		case 2:	/* No resources (RxFDs) */
-		case 9:	/* Suspended with no more RBDs */
-		case 10: /* No resources due to no RBDs */
-		case 12: /* Ready with no RBDs */
-			speedo_rx_soft_reset(dev);
-			break;
-		case 3:  case 5:  case 6:  case 7:  case 8:
-		case 11:  case 13:  case 14:  case 15:
-			/* these are all reserved values */
-			break;
-		}
-
-
-		/* User interrupt, Command/Tx unit interrupt or CU not active. */
-		if (status & 0xA400) {
-			speedo_tx_buffer_gc(dev);
-			if (sp->tx_full
-				&& (int)(sp->cur_tx - sp->dirty_tx) < TX_QUEUE_UNFULL) {
-				/* The ring is no longer full. */
-				sp->tx_full = 0;
-				netif_wake_queue(dev); /* Attention: under a spinlock.  --SAW */
-			}
-		}
-
-		spin_unlock(&sp->lock);
-
-		if (--boguscnt < 0) {
-			printk(KERN_ERR "%s: Too much work at interrupt, status=0x%4.4x.\n",
-				   dev->name, status);
-			/* Clear all interrupt sources. */
-			/* Will change from 0xfc00 to 0xff00 when we start handling
-			   FCP and ER interrupts --Dragan */
-			iowrite16(0xfc00, ioaddr + SCBStatus);
-			break;
-		}
-	} while (1);
-
-	if (netif_msg_intr(sp))
-		printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
-			   dev->name, ioread16(ioaddr + SCBStatus));
-
-	clear_bit(0, (void*)&sp->in_interrupt);
-	return IRQ_RETVAL(handled);
-}
-
-static inline struct RxFD *speedo_rx_alloc(struct net_device *dev, int entry)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	struct RxFD *rxf;
-	struct sk_buff *skb;
-	/* Get a fresh skbuff to replace the consumed one. */
-	skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
-	if (skb)
-		rx_align(skb);		/* Align IP on 16 byte boundary */
-	sp->rx_skbuff[entry] = skb;
-	if (skb == NULL) {
-		sp->rx_ringp[entry] = NULL;
-		return NULL;
-	}
-	rxf = sp->rx_ringp[entry] = (struct RxFD *)skb->data;
-	sp->rx_ring_dma[entry] =
-		pci_map_single(sp->pdev, rxf,
-					   PKT_BUF_SZ + sizeof(struct RxFD), PCI_DMA_FROMDEVICE);
-	skb->dev = dev;
-	skb_reserve(skb, sizeof(struct RxFD));
-	rxf->rx_buf_addr = cpu_to_le32(0xffffffff);
-	pci_dma_sync_single_for_device(sp->pdev, sp->rx_ring_dma[entry],
-								   sizeof(struct RxFD), PCI_DMA_TODEVICE);
-	return rxf;
-}
-
-static inline void speedo_rx_link(struct net_device *dev, int entry,
-								  struct RxFD *rxf, dma_addr_t rxf_dma)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	rxf->status = cpu_to_le32(0xC0000001); 	/* '1' for driver use only. */
-	rxf->link = 0;			/* None yet. */
-	rxf->count = cpu_to_le32(PKT_BUF_SZ << 16);
-	sp->last_rxf->link = cpu_to_le32(rxf_dma);
-	sp->last_rxf->status &= cpu_to_le32(~0xC0000000);
-	pci_dma_sync_single_for_device(sp->pdev, sp->last_rxf_dma,
-								   sizeof(struct RxFD), PCI_DMA_TODEVICE);
-	sp->last_rxf = rxf;
-	sp->last_rxf_dma = rxf_dma;
-}
-
-static int speedo_refill_rx_buf(struct net_device *dev, int force)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	int entry;
-	struct RxFD *rxf;
-
-	entry = sp->dirty_rx % RX_RING_SIZE;
-	if (sp->rx_skbuff[entry] == NULL) {
-		rxf = speedo_rx_alloc(dev, entry);
-		if (rxf == NULL) {
-			unsigned int forw;
-			int forw_entry;
-			if (netif_msg_rx_err(sp) || !(sp->rx_ring_state & RrOOMReported)) {
-				printk(KERN_WARNING "%s: can't fill rx buffer (force %d)!\n",
-						dev->name, force);
-				sp->rx_ring_state |= RrOOMReported;
-			}
-			speedo_show_state(dev);
-			if (!force)
-				return -1;	/* Better luck next time!  */
-			/* Borrow an skb from one of next entries. */
-			for (forw = sp->dirty_rx + 1; forw != sp->cur_rx; forw++)
-				if (sp->rx_skbuff[forw % RX_RING_SIZE] != NULL)
-					break;
-			if (forw == sp->cur_rx)
-				return -1;
-			forw_entry = forw % RX_RING_SIZE;
-			sp->rx_skbuff[entry] = sp->rx_skbuff[forw_entry];
-			sp->rx_skbuff[forw_entry] = NULL;
-			rxf = sp->rx_ringp[forw_entry];
-			sp->rx_ringp[forw_entry] = NULL;
-			sp->rx_ringp[entry] = rxf;
-		}
-	} else {
-		rxf = sp->rx_ringp[entry];
-	}
-	speedo_rx_link(dev, entry, rxf, sp->rx_ring_dma[entry]);
-	sp->dirty_rx++;
-	sp->rx_ring_state &= ~(RrNoMem|RrOOMReported); /* Mark the progress. */
-	return 0;
-}
-
-static void speedo_refill_rx_buffers(struct net_device *dev, int force)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-
-	/* Refill the RX ring. */
-	while ((int)(sp->cur_rx - sp->dirty_rx) > 0 &&
-			speedo_refill_rx_buf(dev, force) != -1);
-}
-
-static int
-speedo_rx(struct net_device *dev)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	int entry = sp->cur_rx % RX_RING_SIZE;
-	int rx_work_limit = sp->dirty_rx + RX_RING_SIZE - sp->cur_rx;
-	int alloc_ok = 1;
-	int npkts = 0;
-
-	if (netif_msg_intr(sp))
-		printk(KERN_DEBUG " In speedo_rx().\n");
-	/* If we own the next entry, it's a new packet. Send it up. */
-	while (sp->rx_ringp[entry] != NULL) {
-		int status;
-		int pkt_len;
-
-		pci_dma_sync_single_for_cpu(sp->pdev, sp->rx_ring_dma[entry],
-									sizeof(struct RxFD), PCI_DMA_FROMDEVICE);
-		status = le32_to_cpu(sp->rx_ringp[entry]->status);
-		pkt_len = le32_to_cpu(sp->rx_ringp[entry]->count) & 0x3fff;
-
-		if (!(status & RxComplete))
-			break;
-
-		if (--rx_work_limit < 0)
-			break;
-
-		/* Check for a rare out-of-memory case: the current buffer is
-		   the last buffer allocated in the RX ring.  --SAW */
-		if (sp->last_rxf == sp->rx_ringp[entry]) {
-			/* Postpone the packet.  It'll be reaped at an interrupt when this
-			   packet is no longer the last packet in the ring. */
-			if (netif_msg_rx_err(sp))
-				printk(KERN_DEBUG "%s: RX packet postponed!\n",
-					   dev->name);
-			sp->rx_ring_state |= RrPostponed;
-			break;
-		}
-
-		if (netif_msg_rx_status(sp))
-			printk(KERN_DEBUG "  speedo_rx() status %8.8x len %d.\n", status,
-				   pkt_len);
-		if ((status & (RxErrTooBig|RxOK|0x0f90)) != RxOK) {
-			if (status & RxErrTooBig)
-				printk(KERN_ERR "%s: Ethernet frame overran the Rx buffer, "
-					   "status %8.8x!\n", dev->name, status);
-			else if (! (status & RxOK)) {
-				/* There was a fatal error.  This *should* be impossible. */
-				sp->stats.rx_errors++;
-				printk(KERN_ERR "%s: Anomalous event in speedo_rx(), "
-					   "status %8.8x.\n",
-					   dev->name, status);
-			}
-		} else {
-			struct sk_buff *skb;
-
-			/* Check if the packet is long enough to just accept without
-			   copying to a properly sized skbuff. */
-			if (pkt_len < rx_copybreak
-				&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
-				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
-				/* 'skb_put()' points to the start of sk_buff data area. */
-				pci_dma_sync_single_for_cpu(sp->pdev, sp->rx_ring_dma[entry],
-											sizeof(struct RxFD) + pkt_len,
-											PCI_DMA_FROMDEVICE);
-
-#if 1 || USE_IP_CSUM
-				/* Packet is in one chunk -- we can copy + cksum. */
-				skb_copy_to_linear_data(skb, sp->rx_skbuff[entry]->data, pkt_len);
-				skb_put(skb, pkt_len);
-#else
-				skb_copy_from_linear_data(sp->rx_skbuff[entry],
-							  skb_put(skb, pkt_len),
-							  pkt_len);
-#endif
-				pci_dma_sync_single_for_device(sp->pdev, sp->rx_ring_dma[entry],
-											   sizeof(struct RxFD) + pkt_len,
-											   PCI_DMA_FROMDEVICE);
-				npkts++;
-			} else {
-				/* Pass up the already-filled skbuff. */
-				skb = sp->rx_skbuff[entry];
-				if (skb == NULL) {
-					printk(KERN_ERR "%s: Inconsistent Rx descriptor chain.\n",
-						   dev->name);
-					break;
-				}
-				sp->rx_skbuff[entry] = NULL;
-				skb_put(skb, pkt_len);
-				npkts++;
-				sp->rx_ringp[entry] = NULL;
-				pci_unmap_single(sp->pdev, sp->rx_ring_dma[entry],
-								 PKT_BUF_SZ + sizeof(struct RxFD),
-								 PCI_DMA_FROMDEVICE);
-			}
-			skb->protocol = eth_type_trans(skb, dev);
-			netif_rx(skb);
-			dev->last_rx = jiffies;
-			sp->stats.rx_packets++;
-			sp->stats.rx_bytes += pkt_len;
-		}
-		entry = (++sp->cur_rx) % RX_RING_SIZE;
-		sp->rx_ring_state &= ~RrPostponed;
-		/* Refill the recently taken buffers.
-		   Do it one-by-one to handle traffic bursts better. */
-		if (alloc_ok && speedo_refill_rx_buf(dev, 0) == -1)
-			alloc_ok = 0;
-	}
-
-	/* Try hard to refill the recently taken buffers. */
-	speedo_refill_rx_buffers(dev, 1);
-
-	if (npkts)
-		sp->last_rx_time = jiffies;
-
-	return 0;
-}
-
-static int
-speedo_close(struct net_device *dev)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	void __iomem *ioaddr = sp->regs;
-	int i;
-
-	netdevice_stop(dev);
-	netif_stop_queue(dev);
-
-	if (netif_msg_ifdown(sp))
-		printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n",
-			   dev->name, ioread16(ioaddr + SCBStatus));
-
-	/* Shut off the media monitoring timer. */
-	del_timer_sync(&sp->timer);
-
-	iowrite16(SCBMaskAll, ioaddr + SCBCmd);
-
-	/* Shutting down the chip nicely fails to disable flow control. So.. */
-	iowrite32(PortPartialReset, ioaddr + SCBPort);
-	ioread32(ioaddr + SCBPort); /* flush posted write */
-	/*
-	 * The chip requires a 10 microsecond quiet period.  Wait here!
-	 */
-	udelay(10);
-
-	free_irq(dev->irq, dev);
-	speedo_show_state(dev);
-
-    /* Free all the skbuffs in the Rx and Tx queues. */
-	for (i = 0; i < RX_RING_SIZE; i++) {
-		struct sk_buff *skb = sp->rx_skbuff[i];
-		sp->rx_skbuff[i] = NULL;
-		/* Clear the Rx descriptors. */
-		if (skb) {
-			pci_unmap_single(sp->pdev,
-					 sp->rx_ring_dma[i],
-					 PKT_BUF_SZ + sizeof(struct RxFD), PCI_DMA_FROMDEVICE);
-			dev_kfree_skb(skb);
-		}
-	}
-
-	for (i = 0; i < TX_RING_SIZE; i++) {
-		struct sk_buff *skb = sp->tx_skbuff[i];
-		sp->tx_skbuff[i] = NULL;
-		/* Clear the Tx descriptors. */
-		if (skb) {
-			pci_unmap_single(sp->pdev,
-					 le32_to_cpu(sp->tx_ring[i].tx_buf_addr0),
-					 skb->len, PCI_DMA_TODEVICE);
-			dev_kfree_skb(skb);
-		}
-	}
-
-	/* Free multicast setting blocks. */
-	for (i = 0; sp->mc_setup_head != NULL; i++) {
-		struct speedo_mc_block *t;
-		t = sp->mc_setup_head->next;
-		kfree(sp->mc_setup_head);
-		sp->mc_setup_head = t;
-	}
-	sp->mc_setup_tail = NULL;
-	if (netif_msg_ifdown(sp))
-		printk(KERN_DEBUG "%s: %d multicast blocks dropped.\n", dev->name, i);
-
-	pci_set_power_state(sp->pdev, PCI_D2);
-
-	return 0;
-}
-
-/* The Speedo-3 has an especially awkward and unusable method of getting
-   statistics out of the chip.  It takes an unpredictable length of time
-   for the dump-stats command to complete.  To avoid a busy-wait loop we
-   update the stats with the previous dump results, and then trigger a
-   new dump.
-
-   Oh, and incoming frames are dropped while executing dump-stats!
-   */
-static struct net_device_stats *
-speedo_get_stats(struct net_device *dev)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	void __iomem *ioaddr = sp->regs;
-
-	/* Update only if the previous dump finished. */
-	if (sp->lstats->done_marker == cpu_to_le32(0xA007)) {
-		sp->stats.tx_aborted_errors += le32_to_cpu(sp->lstats->tx_coll16_errs);
-		sp->stats.tx_window_errors += le32_to_cpu(sp->lstats->tx_late_colls);
-		sp->stats.tx_fifo_errors += le32_to_cpu(sp->lstats->tx_underruns);
-		sp->stats.tx_fifo_errors += le32_to_cpu(sp->lstats->tx_lost_carrier);
-		/*sp->stats.tx_deferred += le32_to_cpu(sp->lstats->tx_deferred);*/
-		sp->stats.collisions += le32_to_cpu(sp->lstats->tx_total_colls);
-		sp->stats.rx_crc_errors += le32_to_cpu(sp->lstats->rx_crc_errs);
-		sp->stats.rx_frame_errors += le32_to_cpu(sp->lstats->rx_align_errs);
-		sp->stats.rx_over_errors += le32_to_cpu(sp->lstats->rx_resource_errs);
-		sp->stats.rx_fifo_errors += le32_to_cpu(sp->lstats->rx_overrun_errs);
-		sp->stats.rx_length_errors += le32_to_cpu(sp->lstats->rx_runt_errs);
-		sp->lstats->done_marker = 0x0000;
-		if (netif_running(dev)) {
-			unsigned long flags;
-			/* Take a spinlock to make wait_for_cmd_done and sending the
-			   command atomic.  --SAW */
-			spin_lock_irqsave(&sp->lock, flags);
-			wait_for_cmd_done(dev, sp);
-			iowrite8(CUDumpStats, ioaddr + SCBCmd);
-			spin_unlock_irqrestore(&sp->lock, flags);
-		}
-	}
-	return &sp->stats;
-}
-
-static void speedo_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	strncpy(info->driver, "eepro100", sizeof(info->driver)-1);
-	strncpy(info->version, version, sizeof(info->version)-1);
-	if (sp->pdev)
-		strcpy(info->bus_info, pci_name(sp->pdev));
-}
-
-static int speedo_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	spin_lock_irq(&sp->lock);
-	mii_ethtool_gset(&sp->mii_if, ecmd);
-	spin_unlock_irq(&sp->lock);
-	return 0;
-}
-
-static int speedo_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	int res;
-	spin_lock_irq(&sp->lock);
-	res = mii_ethtool_sset(&sp->mii_if, ecmd);
-	spin_unlock_irq(&sp->lock);
-	return res;
-}
-
-static int speedo_nway_reset(struct net_device *dev)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	return mii_nway_restart(&sp->mii_if);
-}
-
-static u32 speedo_get_link(struct net_device *dev)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	return mii_link_ok(&sp->mii_if);
-}
-
-static u32 speedo_get_msglevel(struct net_device *dev)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	return sp->msg_enable;
-}
-
-static void speedo_set_msglevel(struct net_device *dev, u32 v)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	sp->msg_enable = v;
-}
-
-static const struct ethtool_ops ethtool_ops = {
-	.get_drvinfo = speedo_get_drvinfo,
-	.get_settings = speedo_get_settings,
-	.set_settings = speedo_set_settings,
-	.nway_reset = speedo_nway_reset,
-	.get_link = speedo_get_link,
-	.get_msglevel = speedo_get_msglevel,
-	.set_msglevel = speedo_set_msglevel,
-};
-
-static int speedo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	struct mii_ioctl_data *data = if_mii(rq);
-	int phy = sp->phy[0] & 0x1f;
-	int saved_acpi;
-	int t;
-
-    switch(cmd) {
-	case SIOCGMIIPHY:		/* Get address of MII PHY in use. */
-		data->phy_id = phy;
-
-	case SIOCGMIIREG:		/* Read MII PHY register. */
-		/* FIXME: these operations need to be serialized with MDIO
-		   access from the timeout handler.
-		   They are currently serialized only with MDIO access from the
-		   timer routine.  2000/05/09 SAW */
-		saved_acpi = pci_set_power_state(sp->pdev, PCI_D0);
-		t = del_timer_sync(&sp->timer);
-		data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
-		if (t)
-			add_timer(&sp->timer); /* may be set to the past  --SAW */
-		pci_set_power_state(sp->pdev, saved_acpi);
-		return 0;
-
-	case SIOCSMIIREG:		/* Write MII PHY register. */
-		if (!capable(CAP_NET_ADMIN))
-			return -EPERM;
-		saved_acpi = pci_set_power_state(sp->pdev, PCI_D0);
-		t = del_timer_sync(&sp->timer);
-		mdio_write(dev, data->phy_id, data->reg_num, data->val_in);
-		if (t)
-			add_timer(&sp->timer); /* may be set to the past  --SAW */
-		pci_set_power_state(sp->pdev, saved_acpi);
-		return 0;
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-/* Set or clear the multicast filter for this adaptor.
-   This is very ugly with Intel chips -- we usually have to execute an
-   entire configuration command, plus process a multicast command.
-   This is complicated.  We must put a large configuration command and
-   an arbitrarily-sized multicast command in the transmit list.
-   To minimize the disruption -- the previous command might have already
-   loaded the link -- we convert the current command block, normally a Tx
-   command, into a no-op and link it to the new command.
-*/
-static void set_rx_mode(struct net_device *dev)
-{
-	struct speedo_private *sp = netdev_priv(dev);
-	void __iomem *ioaddr = sp->regs;
-	struct descriptor *last_cmd;
-	char new_rx_mode;
-	unsigned long flags;
-	int entry, i;
-
-	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
-		new_rx_mode = 3;
-	} else if ((dev->flags & IFF_ALLMULTI)  ||
-			   dev->mc_count > multicast_filter_limit) {
-		new_rx_mode = 1;
-	} else
-		new_rx_mode = 0;
-
-	if (netif_msg_rx_status(sp))
-		printk(KERN_DEBUG "%s: set_rx_mode %d -> %d\n", dev->name,
-				sp->rx_mode, new_rx_mode);
-
-	if ((int)(sp->cur_tx - sp->dirty_tx) > TX_RING_SIZE - TX_MULTICAST_SIZE) {
-	    /* The Tx ring is full -- don't add anything!  Hope the mode will be
-		 * set again later. */
-		sp->rx_mode = -1;
-		return;
-	}
-
-	if (new_rx_mode != sp->rx_mode) {
-		u8 *config_cmd_data;
-
-		spin_lock_irqsave(&sp->lock, flags);
-		entry = sp->cur_tx++ % TX_RING_SIZE;
-		last_cmd = sp->last_cmd;
-		sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
-
-		sp->tx_skbuff[entry] = NULL;			/* Redundant. */
-		sp->tx_ring[entry].status = cpu_to_le32(CmdSuspend | CmdConfigure);
-		sp->tx_ring[entry].link =
-			cpu_to_le32(TX_RING_ELEM_DMA(sp, (entry + 1) % TX_RING_SIZE));
-		config_cmd_data = (void *)&sp->tx_ring[entry].tx_desc_addr;
-		/* Construct a full CmdConfig frame. */
-		memcpy(config_cmd_data, i82558_config_cmd, CONFIG_DATA_SIZE);
-		config_cmd_data[1] = (txfifo << 4) | rxfifo;
-		config_cmd_data[4] = rxdmacount;
-		config_cmd_data[5] = txdmacount + 0x80;
-		config_cmd_data[15] |= (new_rx_mode & 2) ? 1 : 0;
-		/* 0x80 doesn't disable FC 0x84 does.
-		   Disable Flow control since we are not ACK-ing any FC interrupts
-		   for now. --Dragan */
-		config_cmd_data[19] = 0x84;
-		config_cmd_data[19] |= sp->mii_if.full_duplex ? 0x40 : 0;
-		config_cmd_data[21] = (new_rx_mode & 1) ? 0x0D : 0x05;
-		if (sp->phy[0] & 0x8000) {			/* Use the AUI port instead. */
-			config_cmd_data[15] |= 0x80;
-			config_cmd_data[8] = 0;
-		}
-		/* Trigger the command unit resume. */
-		wait_for_cmd_done(dev, sp);
-		clear_suspend(last_cmd);
-		iowrite8(CUResume, ioaddr + SCBCmd);
-		if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
-			netif_stop_queue(dev);
-			sp->tx_full = 1;
-		}
-		spin_unlock_irqrestore(&sp->lock, flags);
-	}
-
-	if (new_rx_mode == 0  &&  dev->mc_count < 4) {
-		/* The simple case of 0-3 multicast list entries occurs often, and
-		   fits within one tx_ring[] entry. */
-		struct dev_mc_list *mclist;
-		__le16 *setup_params, *eaddrs;
-
-		spin_lock_irqsave(&sp->lock, flags);
-		entry = sp->cur_tx++ % TX_RING_SIZE;
-		last_cmd = sp->last_cmd;
-		sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
-
-		sp->tx_skbuff[entry] = NULL;
-		sp->tx_ring[entry].status = cpu_to_le32(CmdSuspend | CmdMulticastList);
-		sp->tx_ring[entry].link =
-			cpu_to_le32(TX_RING_ELEM_DMA(sp, (entry + 1) % TX_RING_SIZE));
-		sp->tx_ring[entry].tx_desc_addr = 0; /* Really MC list count. */
-		setup_params = (__le16 *)&sp->tx_ring[entry].tx_desc_addr;
-		*setup_params++ = cpu_to_le16(dev->mc_count*6);
-		/* Fill in the multicast addresses. */
-		for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
-			 i++, mclist = mclist->next) {
-			eaddrs = (__le16 *)mclist->dmi_addr;
-			*setup_params++ = *eaddrs++;
-			*setup_params++ = *eaddrs++;
-			*setup_params++ = *eaddrs++;
-		}
-
-		wait_for_cmd_done(dev, sp);
-		clear_suspend(last_cmd);
-		/* Immediately trigger the command unit resume. */
-		iowrite8(CUResume, ioaddr + SCBCmd);
-
-		if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
-			netif_stop_queue(dev);
-			sp->tx_full = 1;
-		}
-		spin_unlock_irqrestore(&sp->lock, flags);
-	} else if (new_rx_mode == 0) {
-		struct dev_mc_list *mclist;
-		__le16 *setup_params, *eaddrs;
-		struct speedo_mc_block *mc_blk;
-		struct descriptor *mc_setup_frm;
-		int i;
-
-		mc_blk = kmalloc(sizeof(*mc_blk) + 2 + multicast_filter_limit*6,
-						 GFP_ATOMIC);
-		if (mc_blk == NULL) {
-			printk(KERN_ERR "%s: Failed to allocate a setup frame.\n",
-				   dev->name);
-			sp->rx_mode = -1; /* We failed, try again. */
-			return;
-		}
-		mc_blk->next = NULL;
-		mc_blk->len = 2 + multicast_filter_limit*6;
-		mc_blk->frame_dma =
-			pci_map_single(sp->pdev, &mc_blk->frame, mc_blk->len,
-					PCI_DMA_TODEVICE);
-		mc_setup_frm = &mc_blk->frame;
-
-		/* Fill the setup frame. */
-		if (netif_msg_ifup(sp))
-			printk(KERN_DEBUG "%s: Constructing a setup frame at %p.\n",
-				   dev->name, mc_setup_frm);
-		mc_setup_frm->cmd_status =
-			cpu_to_le32(CmdSuspend | CmdIntr | CmdMulticastList);
-		/* Link set below. */
-		setup_params = (__le16 *)&mc_setup_frm->params;
-		*setup_params++ = cpu_to_le16(dev->mc_count*6);
-		/* Fill in the multicast addresses. */
-		for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
-			 i++, mclist = mclist->next) {
-			eaddrs = (__le16 *)mclist->dmi_addr;
-			*setup_params++ = *eaddrs++;
-			*setup_params++ = *eaddrs++;
-			*setup_params++ = *eaddrs++;
-		}
-
-		/* Disable interrupts while playing with the Tx Cmd list. */
-		spin_lock_irqsave(&sp->lock, flags);
-
-		if (sp->mc_setup_tail)
-			sp->mc_setup_tail->next = mc_blk;
-		else
-			sp->mc_setup_head = mc_blk;
-		sp->mc_setup_tail = mc_blk;
-		mc_blk->tx = sp->cur_tx;
-
-		entry = sp->cur_tx++ % TX_RING_SIZE;
-		last_cmd = sp->last_cmd;
-		sp->last_cmd = mc_setup_frm;
-
-		/* Change the command to a NoOp, pointing to the CmdMulti command. */
-		sp->tx_skbuff[entry] = NULL;
-		sp->tx_ring[entry].status = cpu_to_le32(CmdNOp);
-		sp->tx_ring[entry].link = cpu_to_le32(mc_blk->frame_dma);
-
-		/* Set the link in the setup frame. */
-		mc_setup_frm->link =
-			cpu_to_le32(TX_RING_ELEM_DMA(sp, (entry + 1) % TX_RING_SIZE));
-
-		pci_dma_sync_single_for_device(sp->pdev, mc_blk->frame_dma,
-									   mc_blk->len, PCI_DMA_TODEVICE);
-
-		wait_for_cmd_done(dev, sp);
-		clear_suspend(last_cmd);
-		/* Immediately trigger the command unit resume. */
-		iowrite8(CUResume, ioaddr + SCBCmd);
-
-		if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
-			netif_stop_queue(dev);
-			sp->tx_full = 1;
-		}
-		spin_unlock_irqrestore(&sp->lock, flags);
-
-		if (netif_msg_rx_status(sp))
-			printk(" CmdMCSetup frame length %d in entry %d.\n",
-				   dev->mc_count, entry);
-	}
-
-	sp->rx_mode = new_rx_mode;
-}
-
-#ifdef CONFIG_PM
-static int eepro100_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct net_device *dev = pci_get_drvdata (pdev);
-	struct speedo_private *sp = netdev_priv(dev);
-	void __iomem *ioaddr = sp->regs;
-
-	pci_save_state(pdev);
-
-	if (!netif_running(dev))
-		return 0;
-
-	del_timer_sync(&sp->timer);
-
-	netif_device_detach(dev);
-	iowrite32(PortPartialReset, ioaddr + SCBPort);
-
-	/* XXX call pci_set_power_state ()? */
-	pci_disable_device(pdev);
-	pci_set_power_state (pdev, PCI_D3hot);
-	return 0;
-}
-
-static int eepro100_resume(struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata (pdev);
-	struct speedo_private *sp = netdev_priv(dev);
-	void __iomem *ioaddr = sp->regs;
-	int rc;
-
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-
-	rc = pci_enable_device(pdev);
-	if (rc)
-		return rc;
-
-	pci_set_master(pdev);
-
-	if (!netif_running(dev))
-		return 0;
-
-	/* I'm absolutely uncertain if this part of code may work.
-	   The problems are:
-	    - correct hardware reinitialization;
-		- correct driver behavior between different steps of the
-		  reinitialization;
-		- serialization with other driver calls.
-	   2000/03/08  SAW */
-	iowrite16(SCBMaskAll, ioaddr + SCBCmd);
-	speedo_resume(dev);
-	netif_device_attach(dev);
-	sp->rx_mode = -1;
-	sp->flow_ctrl = sp->partner = 0;
-	set_rx_mode(dev);
-	sp->timer.expires = RUN_AT(2*HZ);
-	add_timer(&sp->timer);
-	return 0;
-}
-#endif /* CONFIG_PM */
-
-static void __devexit eepro100_remove_one (struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata (pdev);
-	struct speedo_private *sp = netdev_priv(dev);
-
-	unregister_netdev(dev);
-
-	release_region(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1));
-	release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
-
-	pci_iounmap(pdev, sp->regs);
-	pci_free_consistent(pdev, TX_RING_SIZE * sizeof(struct TxFD)
-								+ sizeof(struct speedo_stats),
-						sp->tx_ring, sp->tx_ring_dma);
-	pci_disable_device(pdev);
-	free_netdev(dev);
-}
-
-static struct pci_device_id eepro100_pci_tbl[] = {
-	{ PCI_VENDOR_ID_INTEL, 0x1229, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x1209, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x1029, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x1030, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x1031, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x1032, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x1033, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x1034, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x1035, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x1036, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x1037, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x1038, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x1039, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x103A, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x103B, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x103C, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x103D, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x103E, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x1050, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x1059, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x1227, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x2449, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x2459, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x245D, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x5200, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, 0x5201, PCI_ANY_ID, PCI_ANY_ID, },
-	{ 0,}
-};
-MODULE_DEVICE_TABLE(pci, eepro100_pci_tbl);
-
-static struct pci_driver eepro100_driver = {
-	.name		= "eepro100",
-	.id_table	= eepro100_pci_tbl,
-	.probe		= eepro100_init_one,
-	.remove		= __devexit_p(eepro100_remove_one),
-#ifdef CONFIG_PM
-	.suspend	= eepro100_suspend,
-	.resume		= eepro100_resume,
-#endif /* CONFIG_PM */
-};
-
-static int __init eepro100_init_module(void)
-{
-#ifdef MODULE
-	printk(version);
-#endif
-	return pci_register_driver(&eepro100_driver);
-}
-
-static void __exit eepro100_cleanup_module(void)
-{
-	pci_unregister_driver(&eepro100_driver);
-}
-
-module_init(eepro100_init_module);
-module_exit(eepro100_cleanup_module);
-
-/*
- * Local variables:
- *  compile-command: "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c eepro100.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`"
- *  c-indent-level: 4
- *  c-basic-offset: 4
- *  tab-width: 4
- * End:
- */