i825xx: Move the Intel 82586/82593/82596 based drivers

Move the drivers that use the i82586/i82593/i82596 chipsets into
drivers/net/ethernet/i825xx/ and make the necessary Kconfig and
Makefile changes.  There were 4 3Com drivers which were initially
moved into 3com/, which now reside in i825xx since they all used
the i82586 chip.

CC: Philip Blundell <philb@gnu.org>
CC: Russell King <linux@arm.linux.org.uk>
CC: <aris@cathedrallabs.org>
CC: Donald Becker <becker@scyld.com>
CC: Chris Beauregard <cpbeaure@undergrad.math.uwaterloo.ca>
CC: Richard Procter <rnp@paradise.net.nz>
CC: Andries Brouwer <aeb@cwi.nl>
CC: "M.Hipp" <hippm@informatik.uni-tuebingen.de>
CC: Richard Hirst <richard@sleepie.demon.co.uk>
CC: Sam Creasey <sammy@oh.verio.com>
CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 1822 deletions

diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
deleted file mode 100644
index dfeb006035d..00000000000
--- a/drivers/net/eepro.c
+++ /dev/null
@@ -1,1822 +0,0 @@
-/* eepro.c: Intel EtherExpress Pro/10 device driver for Linux. */
-/*
-	Written 1994, 1995,1996 by Bao C. Ha.
-
-	Copyright (C) 1994, 1995,1996 by Bao C. Ha.
-
-	This software may be used and distributed
-	according to the terms of the GNU General Public License,
-	incorporated herein by reference.
-
-	The author may be reached at bao.ha@srs.gov
-	or 418 Hastings Place, Martinez, GA 30907.
-
-	Things remaining to do:
-	Better record keeping of errors.
-	Eliminate transmit interrupt to reduce overhead.
-	Implement "concurrent processing". I won't be doing it!
-
-	Bugs:
-
-	If you have a problem of not detecting the 82595 during a
-	reboot (warm reset), disable the FLASH memory should fix it.
-	This is a compatibility hardware problem.
-
-	Versions:
-	0.13b	basic ethtool support (aris, 09/13/2004)
-	0.13a   in memory shortage, drop packets also in board
-		(Michael Westermann <mw@microdata-pos.de>, 07/30/2002)
-	0.13    irq sharing, rewrote probe function, fixed a nasty bug in
-		hardware_send_packet and a major cleanup (aris, 11/08/2001)
-	0.12d	fixing a problem with single card detected as eight eth devices
-		fixing a problem with sudden drop in card performance
-		(chris (asdn@go2.pl), 10/29/2001)
-	0.12c	fixing some problems with old cards (aris, 01/08/2001)
-	0.12b	misc fixes (aris, 06/26/2000)
-	0.12a   port of version 0.12a of 2.2.x kernels to 2.3.x
-		(aris (aris@conectiva.com.br), 05/19/2000)
-	0.11e   some tweaks about multiple cards support (PdP, jul/aug 1999)
-	0.11d	added __initdata, __init stuff; call spin_lock_init
-	        in eepro_probe1. Replaced "eepro" by dev->name. Augmented
-		the code protected by spin_lock in interrupt routine
-		(PdP, 12/12/1998)
-	0.11c   minor cleanup (PdP, RMC, 09/12/1998)
-	0.11b   Pascal Dupuis (dupuis@lei.ucl.ac.be): works as a module
-	        under 2.1.xx. Debug messages are flagged as KERN_DEBUG to
-		avoid console flooding. Added locking at critical parts. Now
-		the dawn thing is SMP safe.
-	0.11a   Attempt to get 2.1.xx support up (RMC)
-	0.11	Brian Candler added support for multiple cards. Tested as
-		a module, no idea if it works when compiled into kernel.
-
-	0.10e	Rick Bressler notified me that ifconfig up;ifconfig down fails
-		because the irq is lost somewhere. Fixed that by moving
-		request_irq and free_irq to eepro_open and eepro_close respectively.
-	0.10d	Ugh! Now Wakeup works. Was seriously broken in my first attempt.
-		I'll need to find a way to specify an ioport other than
-		the default one in the PnP case. PnP definitively sucks.
-		And, yes, this is not the only reason.
-	0.10c	PnP Wakeup Test for 595FX. uncomment #define PnPWakeup;
-		to use.
-	0.10b	Should work now with (some) Pro/10+. At least for
-		me (and my two cards) it does. _No_ guarantee for
-		function with non-Pro/10+ cards! (don't have any)
-		(RMC, 9/11/96)
-
-	0.10	Added support for the Etherexpress Pro/10+.  The
-		IRQ map was changed significantly from the old
-		pro/10.  The new interrupt map was provided by
-		Rainer M. Canavan (Canavan@Zeus.cs.bonn.edu).
-		(BCH, 9/3/96)
-
-	0.09	Fixed a race condition in the transmit algorithm,
-		which causes crashes under heavy load with fast
-		pentium computers.  The performance should also
-		improve a bit.  The size of RX buffer, and hence
-		TX buffer, can also be changed via lilo or insmod.
-		(BCH, 7/31/96)
-
-	0.08	Implement 32-bit I/O for the 82595TX and 82595FX
-		based lan cards.  Disable full-duplex mode if TPE
-		is not used.  (BCH, 4/8/96)
-
-	0.07a	Fix a stat report which counts every packet as a
-		heart-beat failure. (BCH, 6/3/95)
-
-	0.07	Modified to support all other 82595-based lan cards.
-		The IRQ vector of the EtherExpress Pro will be set
-		according to the value saved in the EEPROM.  For other
-		cards, I will do autoirq_request() to grab the next
-		available interrupt vector. (BCH, 3/17/95)
-
-	0.06a,b	Interim released.  Minor changes in the comments and
-		print out format. (BCH, 3/9/95 and 3/14/95)
-
-	0.06	First stable release that I am comfortable with. (BCH,
-		3/2/95)
-
-	0.05	Complete testing of multicast. (BCH, 2/23/95)
-
-	0.04	Adding multicast support. (BCH, 2/14/95)
-
-	0.03	First widely alpha release for public testing.
-		(BCH, 2/14/95)
-
-*/
-
-static const char version[] =
-	"eepro.c: v0.13b 09/13/2004 aris@cathedrallabs.org\n";
-
-#include <linux/module.h>
-
-/*
-  Sources:
-
-	This driver wouldn't have been written without the availability
-	of the Crynwr's Lan595 driver source code.  It helps me to
-	familiarize with the 82595 chipset while waiting for the Intel
-	documentation.  I also learned how to detect the 82595 using
-	the packet driver's technique.
-
-	This driver is written by cutting and pasting the skeleton.c driver
-	provided by Donald Becker.  I also borrowed the EEPROM routine from
-	Donald Becker's 82586 driver.
-
-	Datasheet for the Intel 82595 (including the TX and FX version). It
-	provides just enough info that the casual reader might think that it
-	documents the i82595.
-
-	The User Manual for the 82595.  It provides a lot of the missing
-	information.
-
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-#include <linux/ethtool.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-
-#define DRV_NAME "eepro"
-#define DRV_VERSION "0.13c"
-
-#define compat_dev_kfree_skb( skb, mode ) dev_kfree_skb( (skb) )
-/* I had reports of looong delays with SLOW_DOWN defined as udelay(2) */
-#define SLOW_DOWN inb(0x80)
-/* udelay(2) */
-#define compat_init_data     __initdata
-enum iftype { AUI=0, BNC=1, TPE=2 };
-
-/* First, a few definitions that the brave might change. */
-/* A zero-terminated list of I/O addresses to be probed. */
-static unsigned int eepro_portlist[] compat_init_data =
-   { 0x300, 0x210, 0x240, 0x280, 0x2C0, 0x200, 0x320, 0x340, 0x360, 0};
-/* note: 0x300 is default, the 595FX supports ALL IO Ports
-  from 0x000 to 0x3F0, some of which are reserved in PCs */
-
-/* To try the (not-really PnP Wakeup: */
-/*
-#define PnPWakeup
-*/
-
-/* use 0 for production, 1 for verification, >2 for debug */
-#ifndef NET_DEBUG
-#define NET_DEBUG 0
-#endif
-static unsigned int net_debug = NET_DEBUG;
-
-/* The number of low I/O ports used by the ethercard. */
-#define EEPRO_IO_EXTENT	16
-
-/* Different 82595 chips */
-#define	LAN595		0
-#define	LAN595TX	1
-#define	LAN595FX	2
-#define	LAN595FX_10ISA	3
-
-/* Information that need to be kept for each board. */
-struct eepro_local {
-	unsigned rx_start;
-	unsigned tx_start; /* start of the transmit chain */
-	int tx_last;  /* pointer to last packet in the transmit chain */
-	unsigned tx_end;   /* end of the transmit chain (plus 1) */
-	int eepro;	/* 1 for the EtherExpress Pro/10,
-			   2 for the EtherExpress Pro/10+,
-			   3 for the EtherExpress 10 (blue cards),
-			   0 for other 82595-based lan cards. */
-	int version;	/* a flag to indicate if this is a TX or FX
-				   version of the 82595 chip. */
-	int stepping;
-
-	spinlock_t lock; /* Serializing lock  */
-
-	unsigned rcv_ram;	/* pre-calculated space for rx */
-	unsigned xmt_ram;	/* pre-calculated space for tx */
-	unsigned char xmt_bar;
-	unsigned char xmt_lower_limit_reg;
-	unsigned char xmt_upper_limit_reg;
-	short xmt_lower_limit;
-	short xmt_upper_limit;
-	short rcv_lower_limit;
-	short rcv_upper_limit;
-	unsigned char eeprom_reg;
-	unsigned short word[8];
-};
-
-/* The station (ethernet) address prefix, used for IDing the board. */
-#define SA_ADDR0 0x00	/* Etherexpress Pro/10 */
-#define SA_ADDR1 0xaa
-#define SA_ADDR2 0x00
-
-#define GetBit(x,y) ((x & (1<<y))>>y)
-
-/* EEPROM Word 0: */
-#define ee_PnP       0  /* Plug 'n Play enable bit */
-#define ee_Word1     1  /* Word 1? */
-#define ee_BusWidth  2  /* 8/16 bit */
-#define ee_FlashAddr 3  /* Flash Address */
-#define ee_FlashMask 0x7   /* Mask */
-#define ee_AutoIO    6  /* */
-#define ee_reserved0 7  /* =0! */
-#define ee_Flash     8  /* Flash there? */
-#define ee_AutoNeg   9  /* Auto Negotiation enabled? */
-#define ee_IO0       10 /* IO Address LSB */
-#define ee_IO0Mask   0x /*...*/
-#define ee_IO1       15 /* IO MSB */
-
-/* EEPROM Word 1: */
-#define ee_IntSel    0   /* Interrupt */
-#define ee_IntMask   0x7
-#define ee_LI        3   /* Link Integrity 0= enabled */
-#define ee_PC        4   /* Polarity Correction 0= enabled */
-#define ee_TPE_AUI   5   /* PortSelection 1=TPE */
-#define ee_Jabber    6   /* Jabber prevention 0= enabled */
-#define ee_AutoPort  7   /* Auto Port Selection 1= Disabled */
-#define ee_SMOUT     8   /* SMout Pin Control 0= Input */
-#define ee_PROM      9   /* Flash EPROM / PROM 0=Flash */
-#define ee_reserved1 10  /* .. 12 =0! */
-#define ee_AltReady  13  /* Alternate Ready, 0=normal */
-#define ee_reserved2 14  /* =0! */
-#define ee_Duplex    15
-
-/* Word2,3,4: */
-#define ee_IA5       0 /*bit start for individual Addr Byte 5 */
-#define ee_IA4       8 /*bit start for individual Addr Byte 5 */
-#define ee_IA3       0 /*bit start for individual Addr Byte 5 */
-#define ee_IA2       8 /*bit start for individual Addr Byte 5 */
-#define ee_IA1       0 /*bit start for individual Addr Byte 5 */
-#define ee_IA0       8 /*bit start for individual Addr Byte 5 */
-
-/* Word 5: */
-#define ee_BNC_TPE   0 /* 0=TPE */
-#define ee_BootType  1 /* 00=None, 01=IPX, 10=ODI, 11=NDIS */
-#define ee_BootTypeMask 0x3
-#define ee_NumConn   3  /* Number of Connections 0= One or Two */
-#define ee_FlashSock 4  /* Presence of Flash Socket 0= Present */
-#define ee_PortTPE   5
-#define ee_PortBNC   6
-#define ee_PortAUI   7
-#define ee_PowerMgt  10 /* 0= disabled */
-#define ee_CP        13 /* Concurrent Processing */
-#define ee_CPMask    0x7
-
-/* Word 6: */
-#define ee_Stepping  0 /* Stepping info */
-#define ee_StepMask  0x0F
-#define ee_BoardID   4 /* Manucaturer Board ID, reserved */
-#define ee_BoardMask 0x0FFF
-
-/* Word 7: */
-#define ee_INT_TO_IRQ 0 /* int to IRQ Mapping  = 0x1EB8 for Pro/10+ */
-#define ee_FX_INT2IRQ 0x1EB8 /* the _only_ mapping allowed for FX chips */
-
-/*..*/
-#define ee_SIZE 0x40 /* total EEprom Size */
-#define ee_Checksum 0xBABA /* initial and final value for adding checksum */
-
-
-/* Card identification via EEprom:   */
-#define ee_addr_vendor 0x10  /* Word offset for EISA Vendor ID */
-#define ee_addr_id 0x11      /* Word offset for Card ID */
-#define ee_addr_SN 0x12      /* Serial Number */
-#define ee_addr_CRC_8 0x14   /* CRC over last thee Bytes */
-
-
-#define ee_vendor_intel0 0x25  /* Vendor ID Intel */
-#define ee_vendor_intel1 0xD4
-#define ee_id_eepro10p0 0x10   /* ID for eepro/10+ */
-#define ee_id_eepro10p1 0x31
-
-#define TX_TIMEOUT ((4*HZ)/10)
-
-/* Index to functions, as function prototypes. */
-
-static int	eepro_probe1(struct net_device *dev, int autoprobe);
-static int	eepro_open(struct net_device *dev);
-static netdev_tx_t eepro_send_packet(struct sk_buff *skb,
-				     struct net_device *dev);
-static irqreturn_t eepro_interrupt(int irq, void *dev_id);
-static void 	eepro_rx(struct net_device *dev);
-static void 	eepro_transmit_interrupt(struct net_device *dev);
-static int	eepro_close(struct net_device *dev);
-static void     set_multicast_list(struct net_device *dev);
-static void     eepro_tx_timeout (struct net_device *dev);
-
-static int read_eeprom(int ioaddr, int location, struct net_device *dev);
-static int	hardware_send_packet(struct net_device *dev, void *buf, short length);
-static int	eepro_grab_irq(struct net_device *dev);
-
-/*
-			Details of the i82595.
-
-You will need either the datasheet or the user manual to understand what
-is going on here.  The 82595 is very different from the 82586, 82593.
-
-The receive algorithm in eepro_rx() is just an implementation of the
-RCV ring structure that the Intel 82595 imposes at the hardware level.
-The receive buffer is set at 24K, and the transmit buffer is 8K.  I
-am assuming that the total buffer memory is 32K, which is true for the
-Intel EtherExpress Pro/10.  If it is less than that on a generic card,
-the driver will be broken.
-
-The transmit algorithm in the hardware_send_packet() is similar to the
-one in the eepro_rx().  The transmit buffer is a ring linked list.
-I just queue the next available packet to the end of the list.  In my
-system, the 82595 is so fast that the list seems to always contain a
-single packet.  In other systems with faster computers and more congested
-network traffics, the ring linked list should improve performance by
-allowing up to 8K worth of packets to be queued.
-
-The sizes of the receive and transmit buffers can now be changed via lilo
-or insmod.  Lilo uses the appended line "ether=io,irq,debug,rx-buffer,eth0"
-where rx-buffer is in KB unit.  Modules uses the parameter mem which is
-also in KB unit, for example "insmod io=io-address irq=0 mem=rx-buffer."
-The receive buffer has to be more than 3K or less than 29K.  Otherwise,
-it is reset to the default of 24K, and, hence, 8K for the trasnmit
-buffer (transmit-buffer = 32K - receive-buffer).
-
-*/
-#define RAM_SIZE        0x8000
-
-#define RCV_HEADER      8
-#define RCV_DEFAULT_RAM 0x6000
-
-#define XMT_HEADER      8
-#define XMT_DEFAULT_RAM	(RAM_SIZE - RCV_DEFAULT_RAM)
-
-#define XMT_START_PRO	RCV_DEFAULT_RAM
-#define XMT_START_10	0x0000
-#define RCV_START_PRO	0x0000
-#define RCV_START_10	XMT_DEFAULT_RAM
-
-#define	RCV_DONE	0x0008
-#define	RX_OK		0x2000
-#define	RX_ERROR	0x0d81
-
-#define	TX_DONE_BIT	0x0080
-#define	TX_OK		0x2000
-#define	CHAIN_BIT	0x8000
-#define	XMT_STATUS	0x02
-#define	XMT_CHAIN	0x04
-#define	XMT_COUNT	0x06
-
-#define	BANK0_SELECT	0x00
-#define	BANK1_SELECT	0x40
-#define	BANK2_SELECT	0x80
-
-/* Bank 0 registers */
-#define	COMMAND_REG	0x00	/* Register 0 */
-#define	MC_SETUP	0x03
-#define	XMT_CMD		0x04
-#define	DIAGNOSE_CMD	0x07
-#define	RCV_ENABLE_CMD	0x08
-#define	RCV_DISABLE_CMD	0x0a
-#define	STOP_RCV_CMD	0x0b
-#define	RESET_CMD	0x0e
-#define	POWER_DOWN_CMD	0x18
-#define	RESUME_XMT_CMD	0x1c
-#define	SEL_RESET_CMD	0x1e
-#define	STATUS_REG	0x01	/* Register 1 */
-#define	RX_INT		0x02
-#define	TX_INT		0x04
-#define	EXEC_STATUS	0x30
-#define	ID_REG		0x02	/* Register 2	*/
-#define	R_ROBIN_BITS	0xc0	/* round robin counter */
-#define	ID_REG_MASK	0x2c
-#define	ID_REG_SIG	0x24
-#define	AUTO_ENABLE	0x10
-#define	INT_MASK_REG	0x03	/* Register 3	*/
-#define	RX_STOP_MASK	0x01
-#define	RX_MASK		0x02
-#define	TX_MASK		0x04
-#define	EXEC_MASK	0x08
-#define	ALL_MASK	0x0f
-#define	IO_32_BIT	0x10
-#define	RCV_BAR		0x04	/* The following are word (16-bit) registers */
-#define	RCV_STOP	0x06
-
-#define	XMT_BAR_PRO	0x0a
-#define	XMT_BAR_10	0x0b
-
-#define	HOST_ADDRESS_REG	0x0c
-#define	IO_PORT		0x0e
-#define	IO_PORT_32_BIT	0x0c
-
-/* Bank 1 registers */
-#define	REG1	0x01
-#define	WORD_WIDTH	0x02
-#define	INT_ENABLE	0x80
-#define INT_NO_REG	0x02
-#define	RCV_LOWER_LIMIT_REG	0x08
-#define	RCV_UPPER_LIMIT_REG	0x09
-
-#define	XMT_LOWER_LIMIT_REG_PRO 0x0a
-#define	XMT_UPPER_LIMIT_REG_PRO 0x0b
-#define	XMT_LOWER_LIMIT_REG_10  0x0b
-#define	XMT_UPPER_LIMIT_REG_10  0x0a
-
-/* Bank 2 registers */
-#define	XMT_Chain_Int	0x20	/* Interrupt at the end of the transmit chain */
-#define	XMT_Chain_ErrStop	0x40 /* Interrupt at the end of the chain even if there are errors */
-#define	RCV_Discard_BadFrame	0x80 /* Throw bad frames away, and continue to receive others */
-#define	REG2		0x02
-#define	PRMSC_Mode	0x01
-#define	Multi_IA	0x20
-#define	REG3		0x03
-#define	TPE_BIT		0x04
-#define	BNC_BIT		0x20
-#define	REG13		0x0d
-#define	FDX		0x00
-#define	A_N_ENABLE	0x02
-
-#define	I_ADD_REG0	0x04
-#define	I_ADD_REG1	0x05
-#define	I_ADD_REG2	0x06
-#define	I_ADD_REG3	0x07
-#define	I_ADD_REG4	0x08
-#define	I_ADD_REG5	0x09
-
-#define	EEPROM_REG_PRO 0x0a
-#define	EEPROM_REG_10  0x0b
-
-#define EESK 0x01
-#define EECS 0x02
-#define EEDI 0x04
-#define EEDO 0x08
-
-/* do a full reset */
-#define eepro_reset(ioaddr) outb(RESET_CMD, ioaddr)
-
-/* do a nice reset */
-#define eepro_sel_reset(ioaddr) 	{ \
-					outb(SEL_RESET_CMD, ioaddr); \
-					SLOW_DOWN; \
-					SLOW_DOWN; \
-					}
-
-/* disable all interrupts */
-#define eepro_dis_int(ioaddr) outb(ALL_MASK, ioaddr + INT_MASK_REG)
-
-/* clear all interrupts */
-#define eepro_clear_int(ioaddr) outb(ALL_MASK, ioaddr + STATUS_REG)
-
-/* enable tx/rx */
-#define eepro_en_int(ioaddr) outb(ALL_MASK & ~(RX_MASK | TX_MASK), \
-							ioaddr + INT_MASK_REG)
-
-/* enable exec event interrupt */
-#define eepro_en_intexec(ioaddr) outb(ALL_MASK & ~(EXEC_MASK), ioaddr + INT_MASK_REG)
-
-/* enable rx */
-#define eepro_en_rx(ioaddr) outb(RCV_ENABLE_CMD, ioaddr)
-
-/* disable rx */
-#define eepro_dis_rx(ioaddr) outb(RCV_DISABLE_CMD, ioaddr)
-
-/* switch bank */
-#define eepro_sw2bank0(ioaddr) outb(BANK0_SELECT, ioaddr)
-#define eepro_sw2bank1(ioaddr) outb(BANK1_SELECT, ioaddr)
-#define eepro_sw2bank2(ioaddr) outb(BANK2_SELECT, ioaddr)
-
-/* enable interrupt line */
-#define eepro_en_intline(ioaddr) outb(inb(ioaddr + REG1) | INT_ENABLE,\
-				ioaddr + REG1)
-
-/* disable interrupt line */
-#define eepro_dis_intline(ioaddr) outb(inb(ioaddr + REG1) & 0x7f, \
-				ioaddr + REG1);
-
-/* set diagnose flag */
-#define eepro_diag(ioaddr) outb(DIAGNOSE_CMD, ioaddr)
-
-/* ack for rx int */
-#define eepro_ack_rx(ioaddr) outb (RX_INT, ioaddr + STATUS_REG)
-
-/* ack for tx int */
-#define eepro_ack_tx(ioaddr) outb (TX_INT, ioaddr + STATUS_REG)
-
-/* a complete sel reset */
-#define eepro_complete_selreset(ioaddr) { \
-						dev->stats.tx_errors++;\
-						eepro_sel_reset(ioaddr);\
-						lp->tx_end = \
-							lp->xmt_lower_limit;\
-						lp->tx_start = lp->tx_end;\
-						lp->tx_last = 0;\
-						dev->trans_start = jiffies;\
-						netif_wake_queue(dev);\
-						eepro_en_rx(ioaddr);\
-					}
-
-/* Check for a network adaptor of this type, and return '0' if one exists.
-   If dev->base_addr == 0, probe all likely locations.
-   If dev->base_addr == 1, always return failure.
-   If dev->base_addr == 2, allocate space for the device and return success
-   (detachable devices only).
-   */
-static int __init do_eepro_probe(struct net_device *dev)
-{
-	int i;
-	int base_addr = dev->base_addr;
-	int irq = dev->irq;
-
-#ifdef PnPWakeup
-	/* XXXX for multiple cards should this only be run once? */
-
-	/* Wakeup: */
-	#define WakeupPort 0x279
-	#define WakeupSeq    {0x6A, 0xB5, 0xDA, 0xED, 0xF6, 0xFB, 0x7D, 0xBE,\
-	                      0xDF, 0x6F, 0x37, 0x1B, 0x0D, 0x86, 0xC3, 0x61,\
-	                      0xB0, 0x58, 0x2C, 0x16, 0x8B, 0x45, 0xA2, 0xD1,\
-	                      0xE8, 0x74, 0x3A, 0x9D, 0xCE, 0xE7, 0x73, 0x43}
-
-	{
-		unsigned short int WS[32]=WakeupSeq;
-
-		if (request_region(WakeupPort, 2, "eepro wakeup")) {
-			if (net_debug>5)
-				printk(KERN_DEBUG "Waking UP\n");
-
-			outb_p(0,WakeupPort);
-			outb_p(0,WakeupPort);
-			for (i=0; i<32; i++) {
-				outb_p(WS[i],WakeupPort);
-				if (net_debug>5) printk(KERN_DEBUG ": %#x ",WS[i]);
-			}
-
-			release_region(WakeupPort, 2);
-		} else
-			printk(KERN_WARNING "PnP wakeup region busy!\n");
-	}
-#endif
-
-	if (base_addr > 0x1ff)		/* Check a single specified location. */
-		return eepro_probe1(dev, 0);
-
-	else if (base_addr != 0)	/* Don't probe at all. */
-		return -ENXIO;
-
-	for (i = 0; eepro_portlist[i]; i++) {
-		dev->base_addr = eepro_portlist[i];
-		dev->irq = irq;
-		if (eepro_probe1(dev, 1) == 0)
-			return 0;
-	}
-
-	return -ENODEV;
-}
-
-#ifndef MODULE
-struct net_device * __init eepro_probe(int unit)
-{
-	struct net_device *dev = alloc_etherdev(sizeof(struct eepro_local));
-	int err;
-
-	if (!dev)
-		return ERR_PTR(-ENODEV);
-
-	sprintf(dev->name, "eth%d", unit);
-	netdev_boot_setup_check(dev);
-
-	err = do_eepro_probe(dev);
-	if (err)
-		goto out;
-	return dev;
-out:
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-#endif
-
-static void __init printEEPROMInfo(struct net_device *dev)
-{
-	struct eepro_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-	unsigned short Word;
-	int i,j;
-
-	j = ee_Checksum;
-	for (i = 0; i < 8; i++)
-		j += lp->word[i];
-	for ( ; i < ee_SIZE; i++)
-		j += read_eeprom(ioaddr, i, dev);
-
-	printk(KERN_DEBUG "Checksum: %#x\n",j&0xffff);
-
-	Word = lp->word[0];
-	printk(KERN_DEBUG "Word0:\n");
-	printk(KERN_DEBUG " Plug 'n Pray: %d\n",GetBit(Word,ee_PnP));
-	printk(KERN_DEBUG " Buswidth: %d\n",(GetBit(Word,ee_BusWidth)+1)*8 );
-	printk(KERN_DEBUG " AutoNegotiation: %d\n",GetBit(Word,ee_AutoNeg));
-	printk(KERN_DEBUG " IO Address: %#x\n", (Word>>ee_IO0)<<4);
-
-	if (net_debug>4)  {
-		Word = lp->word[1];
-		printk(KERN_DEBUG "Word1:\n");
-		printk(KERN_DEBUG " INT: %d\n", Word & ee_IntMask);
-		printk(KERN_DEBUG " LI: %d\n", GetBit(Word,ee_LI));
-		printk(KERN_DEBUG " PC: %d\n", GetBit(Word,ee_PC));
-		printk(KERN_DEBUG " TPE/AUI: %d\n", GetBit(Word,ee_TPE_AUI));
-		printk(KERN_DEBUG " Jabber: %d\n", GetBit(Word,ee_Jabber));
-		printk(KERN_DEBUG " AutoPort: %d\n", !GetBit(Word,ee_AutoPort));
-		printk(KERN_DEBUG " Duplex: %d\n", GetBit(Word,ee_Duplex));
-	}
-
-	Word = lp->word[5];
-	printk(KERN_DEBUG "Word5:\n");
-	printk(KERN_DEBUG " BNC: %d\n",GetBit(Word,ee_BNC_TPE));
-	printk(KERN_DEBUG " NumConnectors: %d\n",GetBit(Word,ee_NumConn));
-	printk(KERN_DEBUG " Has ");
-	if (GetBit(Word,ee_PortTPE)) printk(KERN_DEBUG "TPE ");
-	if (GetBit(Word,ee_PortBNC)) printk(KERN_DEBUG "BNC ");
-	if (GetBit(Word,ee_PortAUI)) printk(KERN_DEBUG "AUI ");
-	printk(KERN_DEBUG "port(s)\n");
-
-	Word = lp->word[6];
-	printk(KERN_DEBUG "Word6:\n");
-	printk(KERN_DEBUG " Stepping: %d\n",Word & ee_StepMask);
-	printk(KERN_DEBUG " BoardID: %d\n",Word>>ee_BoardID);
-
-	Word = lp->word[7];
-	printk(KERN_DEBUG "Word7:\n");
-	printk(KERN_DEBUG " INT to IRQ:\n");
-
-	for (i=0, j=0; i<15; i++)
-		if (GetBit(Word,i)) printk(KERN_DEBUG " INT%d -> IRQ %d;",j++,i);
-
-	printk(KERN_DEBUG "\n");
-}
-
-/* function to recalculate the limits of buffer based on rcv_ram */
-static void eepro_recalc (struct net_device *dev)
-{
-	struct eepro_local *	lp;
-
-	lp = netdev_priv(dev);
-	lp->xmt_ram = RAM_SIZE - lp->rcv_ram;
-
-	if (lp->eepro == LAN595FX_10ISA) {
-		lp->xmt_lower_limit = XMT_START_10;
-		lp->xmt_upper_limit = (lp->xmt_ram - 2);
-		lp->rcv_lower_limit = lp->xmt_ram;
-		lp->rcv_upper_limit = (RAM_SIZE - 2);
-	}
-	else {
-		lp->rcv_lower_limit = RCV_START_PRO;
-		lp->rcv_upper_limit = (lp->rcv_ram - 2);
-		lp->xmt_lower_limit = lp->rcv_ram;
-		lp->xmt_upper_limit = (RAM_SIZE - 2);
-	}
-}
-
-/* prints boot-time info */
-static void __init eepro_print_info (struct net_device *dev)
-{
-	struct eepro_local *	lp = netdev_priv(dev);
-	int			i;
-	const char *		ifmap[] = {"AUI", "10Base2", "10BaseT"};
-
-	i = inb(dev->base_addr + ID_REG);
-	printk(KERN_DEBUG " id: %#x ",i);
-	printk(" io: %#x ", (unsigned)dev->base_addr);
-
-	switch (lp->eepro) {
-		case LAN595FX_10ISA:
-			printk("%s: Intel EtherExpress 10 ISA\n at %#x,",
-					dev->name, (unsigned)dev->base_addr);
-			break;
-		case LAN595FX:
-			printk("%s: Intel EtherExpress Pro/10+ ISA\n at %#x,",
-					dev->name, (unsigned)dev->base_addr);
-			break;
-		case LAN595TX:
-			printk("%s: Intel EtherExpress Pro/10 ISA at %#x,",
-					dev->name, (unsigned)dev->base_addr);
-			break;
-		case LAN595:
-			printk("%s: Intel 82595-based lan card at %#x,",
-					dev->name, (unsigned)dev->base_addr);
-			break;
-	}
-
-	printk(" %pM", dev->dev_addr);
-
-	if (net_debug > 3)
-		printk(KERN_DEBUG ", %dK RCV buffer",
-				(int)(lp->rcv_ram)/1024);
-
-	if (dev->irq > 2)
-		printk(", IRQ %d, %s.\n", dev->irq, ifmap[dev->if_port]);
-	else
-		printk(", %s.\n", ifmap[dev->if_port]);
-
-	if (net_debug > 3) {
-		i = lp->word[5];
-		if (i & 0x2000) /* bit 13 of EEPROM word 5 */
-			printk(KERN_DEBUG "%s: Concurrent Processing is "
-				"enabled but not used!\n", dev->name);
-	}
-
-	/* Check the station address for the manufacturer's code */
-	if (net_debug>3)
-		printEEPROMInfo(dev);
-}
-
-static const struct ethtool_ops eepro_ethtool_ops;
-
-static const struct net_device_ops eepro_netdev_ops = {
- 	.ndo_open               = eepro_open,
- 	.ndo_stop               = eepro_close,
- 	.ndo_start_xmit    	= eepro_send_packet,
- 	.ndo_set_multicast_list = set_multicast_list,
- 	.ndo_tx_timeout		= eepro_tx_timeout,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-/* This is the real probe routine.  Linux has a history of friendly device
-   probes on the ISA bus.  A good device probe avoids doing writes, and
-   verifies that the correct device exists and functions.  */
-
-static int __init eepro_probe1(struct net_device *dev, int autoprobe)
-{
-	unsigned short station_addr[3], id, counter;
-	int i;
-	struct eepro_local *lp;
-	int ioaddr = dev->base_addr;
-	int err;
-
-	/* Grab the region so we can find another board if autoIRQ fails. */
-	if (!request_region(ioaddr, EEPRO_IO_EXTENT, DRV_NAME)) {
-		if (!autoprobe)
-			printk(KERN_WARNING "EEPRO: io-port 0x%04x in use\n",
-				ioaddr);
-		return -EBUSY;
-	}
-
-	/* Now, we are going to check for the signature of the
-	   ID_REG (register 2 of bank 0) */
-
-	id = inb(ioaddr + ID_REG);
-
-	if ((id & ID_REG_MASK) != ID_REG_SIG)
-		goto exit;
-
-	/* We seem to have the 82595 signature, let's
-	   play with its counter (last 2 bits of
-	   register 2 of bank 0) to be sure. */
-
-	counter = id & R_ROBIN_BITS;
-
-	if ((inb(ioaddr + ID_REG) & R_ROBIN_BITS) != (counter + 0x40))
-		goto exit;
-
-	lp = netdev_priv(dev);
-	memset(lp, 0, sizeof(struct eepro_local));
-	lp->xmt_bar = XMT_BAR_PRO;
-	lp->xmt_lower_limit_reg = XMT_LOWER_LIMIT_REG_PRO;
-	lp->xmt_upper_limit_reg = XMT_UPPER_LIMIT_REG_PRO;
-	lp->eeprom_reg = EEPROM_REG_PRO;
-	spin_lock_init(&lp->lock);
-
-	/* Now, get the ethernet hardware address from
-	   the EEPROM */
-	station_addr[0] = read_eeprom(ioaddr, 2, dev);
-
-	/* FIXME - find another way to know that we've found
-	 * an Etherexpress 10
-	 */
-	if (station_addr[0] == 0x0000 || station_addr[0] == 0xffff) {
-		lp->eepro = LAN595FX_10ISA;
-		lp->eeprom_reg = EEPROM_REG_10;
-		lp->xmt_lower_limit_reg = XMT_LOWER_LIMIT_REG_10;
-		lp->xmt_upper_limit_reg = XMT_UPPER_LIMIT_REG_10;
-		lp->xmt_bar = XMT_BAR_10;
-		station_addr[0] = read_eeprom(ioaddr, 2, dev);
-	}
-
-	/* get all words at once. will be used here and for ethtool */
-	for (i = 0; i < 8; i++) {
-		lp->word[i] = read_eeprom(ioaddr, i, dev);
-	}
-	station_addr[1] = lp->word[3];
-	station_addr[2] = lp->word[4];
-
-	if (!lp->eepro) {
-		if (lp->word[7] == ee_FX_INT2IRQ)
-			lp->eepro = 2;
-		else if (station_addr[2] == SA_ADDR1)
-			lp->eepro = 1;
-	}
-
-	/* Fill in the 'dev' fields. */
-	for (i=0; i < 6; i++)
-		dev->dev_addr[i] = ((unsigned char *) station_addr)[5-i];
-
-	/* RX buffer must be more than 3K and less than 29K */
-	if (dev->mem_end < 3072 || dev->mem_end > 29696)
-		lp->rcv_ram = RCV_DEFAULT_RAM;
-
-	/* calculate {xmt,rcv}_{lower,upper}_limit */
-	eepro_recalc(dev);
-
-	if (GetBit(lp->word[5], ee_BNC_TPE))
-		dev->if_port = BNC;
-	else
-		dev->if_port = TPE;
-
- 	if (dev->irq < 2 && lp->eepro != 0) {
- 		/* Mask off INT number */
- 		int count = lp->word[1] & 7;
- 		unsigned irqMask = lp->word[7];
-
- 		while (count--)
- 			irqMask &= irqMask - 1;
-
- 		count = ffs(irqMask);
-
- 		if (count)
- 			dev->irq = count - 1;
-
- 		if (dev->irq < 2) {
- 			printk(KERN_ERR " Duh! illegal interrupt vector stored in EEPROM.\n");
- 			goto exit;
- 		} else if (dev->irq == 2) {
- 			dev->irq = 9;
- 		}
- 	}
-
-	dev->netdev_ops		= &eepro_netdev_ops;
- 	dev->watchdog_timeo	= TX_TIMEOUT;
-	dev->ethtool_ops	= &eepro_ethtool_ops;
-
-	/* print boot time info */
-	eepro_print_info(dev);
-
-	/* reset 82595 */
-	eepro_reset(ioaddr);
-
-	err = register_netdev(dev);
-	if (err)
-		goto err;
-	return 0;
-exit:
-	err = -ENODEV;
-err:
- 	release_region(dev->base_addr, EEPRO_IO_EXTENT);
- 	return err;
-}
-
-/* Open/initialize the board.  This is called (in the current kernel)
-   sometime after booting when the 'ifconfig' program is run.
-
-   This routine should set everything up anew at each open, even
-   registers that "should" only need to be set once at boot, so that
-   there is non-reboot way to recover if something goes wrong.
-   */
-
-static const char irqrmap[] = {-1,-1,0,1,-1,2,-1,-1,-1,0,3,4,-1,-1,-1,-1};
-static const char irqrmap2[] = {-1,-1,4,0,1,2,-1,3,-1,4,5,6,7,-1,-1,-1};
-static int	eepro_grab_irq(struct net_device *dev)
-{
-	static const int irqlist[] = { 3, 4, 5, 7, 9, 10, 11, 12, 0 };
-	const int *irqp = irqlist;
-	int temp_reg, ioaddr = dev->base_addr;
-
-	eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */
-
-	/* Enable the interrupt line. */
-	eepro_en_intline(ioaddr);
-
-	/* be CAREFUL, BANK 0 now */
-	eepro_sw2bank0(ioaddr);
-
-	/* clear all interrupts */
-	eepro_clear_int(ioaddr);
-
-	/* Let EXEC event to interrupt */
-	eepro_en_intexec(ioaddr);
-
-	do {
-		eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */
-
-		temp_reg = inb(ioaddr + INT_NO_REG);
-		outb((temp_reg & 0xf8) | irqrmap[*irqp], ioaddr + INT_NO_REG);
-
-		eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */
-
-		if (request_irq (*irqp, NULL, IRQF_SHARED, "bogus", dev) != EBUSY) {
-			unsigned long irq_mask;
-			/* Twinkle the interrupt, and check if it's seen */
-			irq_mask = probe_irq_on();
-
-			eepro_diag(ioaddr); /* RESET the 82595 */
-			mdelay(20);
-
-			if (*irqp == probe_irq_off(irq_mask))  /* It's a good IRQ line */
-				break;
-
-			/* clear all interrupts */
-			eepro_clear_int(ioaddr);
-		}
-	} while (*++irqp);
-
-	eepro_sw2bank1(ioaddr); /* Switch back to Bank 1 */
-
-	/* Disable the physical interrupt line. */
-	eepro_dis_intline(ioaddr);
-
-	eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */
-
-	/* Mask all the interrupts. */
-	eepro_dis_int(ioaddr);
-
-	/* clear all interrupts */
-	eepro_clear_int(ioaddr);
-
-	return dev->irq;
-}
-
-static int eepro_open(struct net_device *dev)
-{
-	unsigned short temp_reg, old8, old9;
-	int irqMask;
-	int i, ioaddr = dev->base_addr;
-	struct eepro_local *lp = netdev_priv(dev);
-
-	if (net_debug > 3)
-		printk(KERN_DEBUG "%s: entering eepro_open routine.\n", dev->name);
-
-	irqMask = lp->word[7];
-
-	if (lp->eepro == LAN595FX_10ISA) {
-		if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 3;\n");
-	}
-	else if (irqMask == ee_FX_INT2IRQ) /* INT to IRQ Mask */
-		{
-			lp->eepro = 2; /* Yes, an Intel EtherExpress Pro/10+ */
-			if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 2;\n");
-		}
-
-	else if ((dev->dev_addr[0] == SA_ADDR0 &&
-			dev->dev_addr[1] == SA_ADDR1 &&
-			dev->dev_addr[2] == SA_ADDR2))
-		{
-			lp->eepro = 1;
-			if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 1;\n");
-		}  /* Yes, an Intel EtherExpress Pro/10 */
-
-	else lp->eepro = 0; /* No, it is a generic 82585 lan card */
-
-	/* Get the interrupt vector for the 82595 */
-	if (dev->irq < 2 && eepro_grab_irq(dev) == 0) {
-		printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq);
-		return -EAGAIN;
-	}
-
-	if (request_irq(dev->irq , eepro_interrupt, 0, dev->name, dev)) {
-		printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq);
-		return -EAGAIN;
-	}
-
-	/* Initialize the 82595. */
-
-	eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
-	temp_reg = inb(ioaddr + lp->eeprom_reg);
-
-	lp->stepping = temp_reg >> 5;	/* Get the stepping number of the 595 */
-
-	if (net_debug > 3)
-		printk(KERN_DEBUG "The stepping of the 82595 is %d\n", lp->stepping);
-
-	if (temp_reg & 0x10) /* Check the TurnOff Enable bit */
-		outb(temp_reg & 0xef, ioaddr + lp->eeprom_reg);
-	for (i=0; i < 6; i++)
-		outb(dev->dev_addr[i] , ioaddr + I_ADD_REG0 + i);
-
-	temp_reg = inb(ioaddr + REG1);    /* Setup Transmit Chaining */
-	outb(temp_reg | XMT_Chain_Int | XMT_Chain_ErrStop /* and discard bad RCV frames */
-		| RCV_Discard_BadFrame, ioaddr + REG1);
-
-	temp_reg = inb(ioaddr + REG2); /* Match broadcast */
-	outb(temp_reg | 0x14, ioaddr + REG2);
-
-	temp_reg = inb(ioaddr + REG3);
-	outb(temp_reg & 0x3f, ioaddr + REG3); /* clear test mode */
-
-	/* Set the receiving mode */
-	eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */
-
-	/* Set the interrupt vector */
-	temp_reg = inb(ioaddr + INT_NO_REG);
-	if (lp->eepro == LAN595FX || lp->eepro == LAN595FX_10ISA)
-		outb((temp_reg & 0xf8) | irqrmap2[dev->irq], ioaddr + INT_NO_REG);
-	else outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG);
-
-
-	temp_reg = inb(ioaddr + INT_NO_REG);
-	if (lp->eepro == LAN595FX || lp->eepro == LAN595FX_10ISA)
-		outb((temp_reg & 0xf0) | irqrmap2[dev->irq] | 0x08,ioaddr+INT_NO_REG);
-	else outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG);
-
-	if (net_debug > 3)
-		printk(KERN_DEBUG "eepro_open: content of INT Reg is %x\n", temp_reg);
-
-
-	/* Initialize the RCV and XMT upper and lower limits */
-	outb(lp->rcv_lower_limit >> 8, ioaddr + RCV_LOWER_LIMIT_REG);
-	outb(lp->rcv_upper_limit >> 8, ioaddr + RCV_UPPER_LIMIT_REG);
-	outb(lp->xmt_lower_limit >> 8, ioaddr + lp->xmt_lower_limit_reg);
-	outb(lp->xmt_upper_limit >> 8, ioaddr + lp->xmt_upper_limit_reg);
-
-	/* Enable the interrupt line. */
-	eepro_en_intline(ioaddr);
-
-	/* Switch back to Bank 0 */
-	eepro_sw2bank0(ioaddr);
-
-	/* Let RX and TX events to interrupt */
-	eepro_en_int(ioaddr);
-
-	/* clear all interrupts */
-	eepro_clear_int(ioaddr);
-
-	/* Initialize RCV */
-	outw(lp->rcv_lower_limit, ioaddr + RCV_BAR);
-	lp->rx_start = lp->rcv_lower_limit;
-	outw(lp->rcv_upper_limit | 0xfe, ioaddr + RCV_STOP);
-
-	/* Initialize XMT */
-	outw(lp->xmt_lower_limit, ioaddr + lp->xmt_bar);
-	lp->tx_start = lp->tx_end = lp->xmt_lower_limit;
-	lp->tx_last = 0;
-
-	/* Check for the i82595TX and i82595FX */
-	old8 = inb(ioaddr + 8);
-	outb(~old8, ioaddr + 8);
-
-	if ((temp_reg = inb(ioaddr + 8)) == old8) {
-		if (net_debug > 3)
-			printk(KERN_DEBUG "i82595 detected!\n");
-		lp->version = LAN595;
-	}
-	else {
-		lp->version = LAN595TX;
-		outb(old8, ioaddr + 8);
-		old9 = inb(ioaddr + 9);
-
-		if (irqMask==ee_FX_INT2IRQ) {
-			if (net_debug > 3) {
-				printk(KERN_DEBUG "IrqMask: %#x\n",irqMask);
-				printk(KERN_DEBUG "i82595FX detected!\n");
-			}
-			lp->version = LAN595FX;
-			outb(old9, ioaddr + 9);
-			if (dev->if_port != TPE) {	/* Hopefully, this will fix the
-							problem of using Pentiums and
-							pro/10 w/ BNC. */
-				eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
-				temp_reg = inb(ioaddr + REG13);
-				/* disable the full duplex mode since it is not
-				applicable with the 10Base2 cable. */
-				outb(temp_reg & ~(FDX | A_N_ENABLE), REG13);
-				eepro_sw2bank0(ioaddr); /* be CAREFUL, BANK 0 now */
-			}
-		}
-		else if (net_debug > 3) {
-			printk(KERN_DEBUG "temp_reg: %#x  ~old9: %#x\n",temp_reg,((~old9)&0xff));
-			printk(KERN_DEBUG "i82595TX detected!\n");
-		}
-	}
-
-	eepro_sel_reset(ioaddr);
-
-	netif_start_queue(dev);
-
-	if (net_debug > 3)
-		printk(KERN_DEBUG "%s: exiting eepro_open routine.\n", dev->name);
-
-	/* enabling rx */
-	eepro_en_rx(ioaddr);
-
-	return 0;
-}
-
-static void eepro_tx_timeout (struct net_device *dev)
-{
-	struct eepro_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-
-	/* if (net_debug > 1) */
-	printk (KERN_ERR "%s: transmit timed out, %s?\n", dev->name,
-		"network cable problem");
-	/* This is not a duplicate. One message for the console,
-	   one for the log file  */
-	printk (KERN_DEBUG "%s: transmit timed out, %s?\n", dev->name,
-		"network cable problem");
-	eepro_complete_selreset(ioaddr);
-}
-
-
-static netdev_tx_t eepro_send_packet(struct sk_buff *skb,
-				     struct net_device *dev)
-{
-	struct eepro_local *lp = netdev_priv(dev);
-	unsigned long flags;
-	int ioaddr = dev->base_addr;
-	short length = skb->len;
-
-	if (net_debug > 5)
-		printk(KERN_DEBUG  "%s: entering eepro_send_packet routine.\n", dev->name);
-
-	if (length < ETH_ZLEN) {
-		if (skb_padto(skb, ETH_ZLEN))
-			return NETDEV_TX_OK;
-		length = ETH_ZLEN;
-	}
-	netif_stop_queue (dev);
-
-	eepro_dis_int(ioaddr);
-	spin_lock_irqsave(&lp->lock, flags);
-
-	{
-		unsigned char *buf = skb->data;
-
-		if (hardware_send_packet(dev, buf, length))
-			/* we won't wake queue here because we're out of space */
-			dev->stats.tx_dropped++;
-		else {
-			dev->stats.tx_bytes+=skb->len;
-			netif_wake_queue(dev);
-		}
-
-	}
-
-	dev_kfree_skb (skb);
-
-	/* You might need to clean up and record Tx statistics here. */
-	/* dev->stats.tx_aborted_errors++; */
-
-	if (net_debug > 5)
-		printk(KERN_DEBUG "%s: exiting eepro_send_packet routine.\n", dev->name);
-
-	eepro_en_int(ioaddr);
-	spin_unlock_irqrestore(&lp->lock, flags);
-
-	return NETDEV_TX_OK;
-}
-
-
-/*	The typical workload of the driver:
-	Handle the network interface interrupts. */
-
-static irqreturn_t
-eepro_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct eepro_local *lp;
-	int ioaddr, status, boguscount = 20;
-	int handled = 0;
-
-	lp = netdev_priv(dev);
-
-        spin_lock(&lp->lock);
-
-	if (net_debug > 5)
-		printk(KERN_DEBUG "%s: entering eepro_interrupt routine.\n", dev->name);
-
-	ioaddr = dev->base_addr;
-
-	while (((status = inb(ioaddr + STATUS_REG)) & (RX_INT|TX_INT)) && (boguscount--))
-	{
-		handled = 1;
-		if (status & RX_INT) {
-			if (net_debug > 4)
-				printk(KERN_DEBUG "%s: packet received interrupt.\n", dev->name);
-
-			eepro_dis_int(ioaddr);
-
-			/* Get the received packets */
-			eepro_ack_rx(ioaddr);
-			eepro_rx(dev);
-
-			eepro_en_int(ioaddr);
-		}
-		if (status & TX_INT) {
-			if (net_debug > 4)
- 				printk(KERN_DEBUG "%s: packet transmit interrupt.\n", dev->name);
-
-
-			eepro_dis_int(ioaddr);
-
-			/* Process the status of transmitted packets */
-			eepro_ack_tx(ioaddr);
-			eepro_transmit_interrupt(dev);
-
-			eepro_en_int(ioaddr);
-		}
-	}
-
-	if (net_debug > 5)
-		printk(KERN_DEBUG "%s: exiting eepro_interrupt routine.\n", dev->name);
-
-	spin_unlock(&lp->lock);
-	return IRQ_RETVAL(handled);
-}
-
-static int eepro_close(struct net_device *dev)
-{
-	struct eepro_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-	short temp_reg;
-
-	netif_stop_queue(dev);
-
-	eepro_sw2bank1(ioaddr); /* Switch back to Bank 1 */
-
-	/* Disable the physical interrupt line. */
-	temp_reg = inb(ioaddr + REG1);
-	outb(temp_reg & 0x7f, ioaddr + REG1);
-
-	eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */
-
-	/* Flush the Tx and disable Rx. */
-	outb(STOP_RCV_CMD, ioaddr);
-	lp->tx_start = lp->tx_end = lp->xmt_lower_limit;
-	lp->tx_last = 0;
-
-	/* Mask all the interrupts. */
-	eepro_dis_int(ioaddr);
-
-	/* clear all interrupts */
-	eepro_clear_int(ioaddr);
-
-	/* Reset the 82595 */
-	eepro_reset(ioaddr);
-
-	/* release the interrupt */
-	free_irq(dev->irq, dev);
-
-	/* Update the statistics here. What statistics? */
-
-	return 0;
-}
-
-/* Set or clear the multicast filter for this adaptor.
- */
-static void
-set_multicast_list(struct net_device *dev)
-{
-	struct eepro_local *lp = netdev_priv(dev);
-	short ioaddr = dev->base_addr;
-	unsigned short mode;
-	struct netdev_hw_addr *ha;
-	int mc_count = netdev_mc_count(dev);
-
-	if (dev->flags&(IFF_ALLMULTI|IFF_PROMISC) || mc_count > 63)
-	{
-		eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
-		mode = inb(ioaddr + REG2);
-		outb(mode | PRMSC_Mode, ioaddr + REG2);
-		mode = inb(ioaddr + REG3);
-		outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */
-		eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */
-	}
-
-	else if (mc_count == 0)
-	{
-		eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
-		mode = inb(ioaddr + REG2);
-		outb(mode & 0xd6, ioaddr + REG2); /* Turn off Multi-IA and PRMSC_Mode bits */
-		mode = inb(ioaddr + REG3);
-		outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */
-		eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */
-	}
-
-	else
-	{
-		unsigned short status, *eaddrs;
-		int i, boguscount = 0;
-
-		/* Disable RX and TX interrupts.  Necessary to avoid
-		   corruption of the HOST_ADDRESS_REG by interrupt
-		   service routines. */
-		eepro_dis_int(ioaddr);
-
-		eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
-		mode = inb(ioaddr + REG2);
-		outb(mode | Multi_IA, ioaddr + REG2);
-		mode = inb(ioaddr + REG3);
-		outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */
-		eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */
-		outw(lp->tx_end, ioaddr + HOST_ADDRESS_REG);
-		outw(MC_SETUP, ioaddr + IO_PORT);
-		outw(0, ioaddr + IO_PORT);
-		outw(0, ioaddr + IO_PORT);
-		outw(6 * (mc_count + 1), ioaddr + IO_PORT);
-
-		netdev_for_each_mc_addr(ha, dev) {
-			eaddrs = (unsigned short *) ha->addr;
-			outw(*eaddrs++, ioaddr + IO_PORT);
-			outw(*eaddrs++, ioaddr + IO_PORT);
-			outw(*eaddrs++, ioaddr + IO_PORT);
-		}
-
-		eaddrs = (unsigned short *) dev->dev_addr;
-		outw(eaddrs[0], ioaddr + IO_PORT);
-		outw(eaddrs[1], ioaddr + IO_PORT);
-		outw(eaddrs[2], ioaddr + IO_PORT);
-		outw(lp->tx_end, ioaddr + lp->xmt_bar);
-		outb(MC_SETUP, ioaddr);
-
-		/* Update the transmit queue */
-		i = lp->tx_end + XMT_HEADER + 6 * (mc_count + 1);
-
-		if (lp->tx_start != lp->tx_end)
-		{
-			/* update the next address and the chain bit in the
-			   last packet */
-			outw(lp->tx_last + XMT_CHAIN, ioaddr + HOST_ADDRESS_REG);
-			outw(i, ioaddr + IO_PORT);
-			outw(lp->tx_last + XMT_COUNT, ioaddr + HOST_ADDRESS_REG);
-			status = inw(ioaddr + IO_PORT);
-			outw(status | CHAIN_BIT, ioaddr + IO_PORT);
-			lp->tx_end = i ;
-		}
-		else {
-			lp->tx_start = lp->tx_end = i ;
-		}
-
-		/* Acknowledge that the MC setup is done */
-		do { /* We should be doing this in the eepro_interrupt()! */
-			SLOW_DOWN;
-			SLOW_DOWN;
-			if (inb(ioaddr + STATUS_REG) & 0x08)
-			{
-				i = inb(ioaddr);
-				outb(0x08, ioaddr + STATUS_REG);
-
-				if (i & 0x20) { /* command ABORTed */
-					printk(KERN_NOTICE "%s: multicast setup failed.\n",
-						dev->name);
-					break;
-				} else if ((i & 0x0f) == 0x03)	{ /* MC-Done */
-					printk(KERN_DEBUG "%s: set Rx mode to %d address%s.\n",
-						dev->name, mc_count,
-						mc_count > 1 ? "es":"");
-					break;
-				}
-			}
-		} while (++boguscount < 100);
-
-		/* Re-enable RX and TX interrupts */
-		eepro_en_int(ioaddr);
-	}
-	if (lp->eepro == LAN595FX_10ISA) {
-		eepro_complete_selreset(ioaddr);
-	}
-	else
-		eepro_en_rx(ioaddr);
-}
-
-/* The horrible routine to read a word from the serial EEPROM. */
-/* IMPORTANT - the 82595 will be set to Bank 0 after the eeprom is read */
-
-/* The delay between EEPROM clock transitions. */
-#define eeprom_delay() { udelay(40); }
-#define EE_READ_CMD (6 << 6)
-
-static int
-read_eeprom(int ioaddr, int location, struct net_device *dev)
-{
-	int i;
-	unsigned short retval = 0;
-	struct eepro_local *lp = netdev_priv(dev);
-	short ee_addr = ioaddr + lp->eeprom_reg;
-	int read_cmd = location | EE_READ_CMD;
-	short ctrl_val = EECS ;
-
-	/* XXXX - black magic */
-		eepro_sw2bank1(ioaddr);
-		outb(0x00, ioaddr + STATUS_REG);
-	/* XXXX - black magic */
-
-	eepro_sw2bank2(ioaddr);
-	outb(ctrl_val, ee_addr);
-
-	/* Shift the read command bits out. */
-	for (i = 8; i >= 0; i--) {
-		short outval = (read_cmd & (1 << i)) ? ctrl_val | EEDI
-			: ctrl_val;
-		outb(outval, ee_addr);
-		outb(outval | EESK, ee_addr);	/* EEPROM clock tick. */
-		eeprom_delay();
-		outb(outval, ee_addr);	/* Finish EEPROM a clock tick. */
-		eeprom_delay();
-	}
-	outb(ctrl_val, ee_addr);
-
-	for (i = 16; i > 0; i--) {
-		outb(ctrl_val | EESK, ee_addr);	 eeprom_delay();
-		retval = (retval << 1) | ((inb(ee_addr) & EEDO) ? 1 : 0);
-		outb(ctrl_val, ee_addr);  eeprom_delay();
-	}
-
-	/* Terminate the EEPROM access. */
-	ctrl_val &= ~EECS;
-	outb(ctrl_val | EESK, ee_addr);
-	eeprom_delay();
-	outb(ctrl_val, ee_addr);
-	eeprom_delay();
-	eepro_sw2bank0(ioaddr);
-	return retval;
-}
-
-static int
-hardware_send_packet(struct net_device *dev, void *buf, short length)
-{
-	struct eepro_local *lp = netdev_priv(dev);
-	short ioaddr = dev->base_addr;
-	unsigned status, tx_available, last, end;
-
-	if (net_debug > 5)
-		printk(KERN_DEBUG "%s: entering hardware_send_packet routine.\n", dev->name);
-
-	/* determine how much of the transmit buffer space is available */
-	if (lp->tx_end > lp->tx_start)
-		tx_available = lp->xmt_ram - (lp->tx_end - lp->tx_start);
-	else if (lp->tx_end < lp->tx_start)
-		tx_available = lp->tx_start - lp->tx_end;
-	else tx_available = lp->xmt_ram;
-
-	if (((((length + 3) >> 1) << 1) + 2*XMT_HEADER) >= tx_available) {
-		/* No space available ??? */
-		return 1;
-		}
-
-		last = lp->tx_end;
-		end = last + (((length + 3) >> 1) << 1) + XMT_HEADER;
-
-	if (end >= lp->xmt_upper_limit + 2) { /* the transmit buffer is wrapped around */
-		if ((lp->xmt_upper_limit + 2 - last) <= XMT_HEADER) {
-				/* Arrrr!!!, must keep the xmt header together,
-				several days were lost to chase this one down. */
-			last = lp->xmt_lower_limit;
-				end = last + (((length + 3) >> 1) << 1) + XMT_HEADER;
-			}
-		else end = lp->xmt_lower_limit + (end -
-						lp->xmt_upper_limit + 2);
-		}
-
-		outw(last, ioaddr + HOST_ADDRESS_REG);
-		outw(XMT_CMD, ioaddr + IO_PORT);
-		outw(0, ioaddr + IO_PORT);
-		outw(end, ioaddr + IO_PORT);
-		outw(length, ioaddr + IO_PORT);
-
-		if (lp->version == LAN595)
-			outsw(ioaddr + IO_PORT, buf, (length + 3) >> 1);
-		else {	/* LAN595TX or LAN595FX, capable of 32-bit I/O processing */
-			unsigned short temp = inb(ioaddr + INT_MASK_REG);
-			outb(temp | IO_32_BIT, ioaddr + INT_MASK_REG);
-			outsl(ioaddr + IO_PORT_32_BIT, buf, (length + 3) >> 2);
-			outb(temp & ~(IO_32_BIT), ioaddr + INT_MASK_REG);
-		}
-
-		/* A dummy read to flush the DRAM write pipeline */
-		status = inw(ioaddr + IO_PORT);
-
-		if (lp->tx_start == lp->tx_end) {
-		outw(last, ioaddr + lp->xmt_bar);
-			outb(XMT_CMD, ioaddr);
-			lp->tx_start = last;   /* I don't like to change tx_start here */
-		}
-		else {
-			/* update the next address and the chain bit in the
-			last packet */
-
-			if (lp->tx_end != last) {
-				outw(lp->tx_last + XMT_CHAIN, ioaddr + HOST_ADDRESS_REG);
-				outw(last, ioaddr + IO_PORT);
-			}
-
-			outw(lp->tx_last + XMT_COUNT, ioaddr + HOST_ADDRESS_REG);
-			status = inw(ioaddr + IO_PORT);
-			outw(status | CHAIN_BIT, ioaddr + IO_PORT);
-
-			/* Continue the transmit command */
-			outb(RESUME_XMT_CMD, ioaddr);
-		}
-
-		lp->tx_last = last;
-		lp->tx_end = end;
-
-		if (net_debug > 5)
-			printk(KERN_DEBUG "%s: exiting hardware_send_packet routine.\n", dev->name);
-
-	return 0;
-}
-
-static void
-eepro_rx(struct net_device *dev)
-{
-	struct eepro_local *lp = netdev_priv(dev);
-	short ioaddr = dev->base_addr;
-	short boguscount = 20;
-	short rcv_car = lp->rx_start;
-	unsigned rcv_event, rcv_status, rcv_next_frame, rcv_size;
-
-	if (net_debug > 5)
-		printk(KERN_DEBUG "%s: entering eepro_rx routine.\n", dev->name);
-
-	/* Set the read pointer to the start of the RCV */
-	outw(rcv_car, ioaddr + HOST_ADDRESS_REG);
-
-	rcv_event = inw(ioaddr + IO_PORT);
-
-	while (rcv_event == RCV_DONE) {
-
-		rcv_status = inw(ioaddr + IO_PORT);
-		rcv_next_frame = inw(ioaddr + IO_PORT);
-		rcv_size = inw(ioaddr + IO_PORT);
-
-		if ((rcv_status & (RX_OK | RX_ERROR)) == RX_OK) {
-
-			/* Malloc up new buffer. */
-			struct sk_buff *skb;
-
-			dev->stats.rx_bytes+=rcv_size;
-			rcv_size &= 0x3fff;
-			skb = dev_alloc_skb(rcv_size+5);
-			if (skb == NULL) {
-				printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
-				dev->stats.rx_dropped++;
-				rcv_car = lp->rx_start + RCV_HEADER + rcv_size;
-				lp->rx_start = rcv_next_frame;
-				outw(rcv_next_frame, ioaddr + HOST_ADDRESS_REG);
-
-				break;
-			}
-			skb_reserve(skb,2);
-
-			if (lp->version == LAN595)
-				insw(ioaddr+IO_PORT, skb_put(skb,rcv_size), (rcv_size + 3) >> 1);
-			else { /* LAN595TX or LAN595FX, capable of 32-bit I/O processing */
-				unsigned short temp = inb(ioaddr + INT_MASK_REG);
-				outb(temp | IO_32_BIT, ioaddr + INT_MASK_REG);
-				insl(ioaddr+IO_PORT_32_BIT, skb_put(skb,rcv_size),
-					(rcv_size + 3) >> 2);
-				outb(temp & ~(IO_32_BIT), ioaddr + INT_MASK_REG);
-			}
-
-			skb->protocol = eth_type_trans(skb,dev);
-			netif_rx(skb);
-			dev->stats.rx_packets++;
-		}
-
-		else { /* Not sure will ever reach here,
-			I set the 595 to discard bad received frames */
-			dev->stats.rx_errors++;
-
-			if (rcv_status & 0x0100)
-				dev->stats.rx_over_errors++;
-
-			else if (rcv_status & 0x0400)
-				dev->stats.rx_frame_errors++;
-
-			else if (rcv_status & 0x0800)
-				dev->stats.rx_crc_errors++;
-
-			printk(KERN_DEBUG "%s: event = %#x, status = %#x, next = %#x, size = %#x\n",
-				dev->name, rcv_event, rcv_status, rcv_next_frame, rcv_size);
-		}
-
-		if (rcv_status & 0x1000)
-			dev->stats.rx_length_errors++;
-
-		rcv_car = lp->rx_start + RCV_HEADER + rcv_size;
-		lp->rx_start = rcv_next_frame;
-
-		if (--boguscount == 0)
-			break;
-
-		outw(rcv_next_frame, ioaddr + HOST_ADDRESS_REG);
-		rcv_event = inw(ioaddr + IO_PORT);
-
-	}
-	if (rcv_car == 0)
-		rcv_car = lp->rcv_upper_limit | 0xff;
-
-	outw(rcv_car - 1, ioaddr + RCV_STOP);
-
-	if (net_debug > 5)
-		printk(KERN_DEBUG "%s: exiting eepro_rx routine.\n", dev->name);
-}
-
-static void
-eepro_transmit_interrupt(struct net_device *dev)
-{
-	struct eepro_local *lp = netdev_priv(dev);
-	short ioaddr = dev->base_addr;
-	short boguscount = 25;
-	short xmt_status;
-
-	while ((lp->tx_start != lp->tx_end) && boguscount--) {
-
-		outw(lp->tx_start, ioaddr + HOST_ADDRESS_REG);
-		xmt_status = inw(ioaddr+IO_PORT);
-
-		if (!(xmt_status & TX_DONE_BIT))
-				break;
-
-		xmt_status = inw(ioaddr+IO_PORT);
-		lp->tx_start = inw(ioaddr+IO_PORT);
-
-		netif_wake_queue (dev);
-
-		if (xmt_status & TX_OK)
-			dev->stats.tx_packets++;
-		else {
-			dev->stats.tx_errors++;
-			if (xmt_status & 0x0400) {
-				dev->stats.tx_carrier_errors++;
-				printk(KERN_DEBUG "%s: carrier error\n",
-					dev->name);
-				printk(KERN_DEBUG "%s: XMT status = %#x\n",
-					dev->name, xmt_status);
-			}
-			else {
-				printk(KERN_DEBUG "%s: XMT status = %#x\n",
-					dev->name, xmt_status);
-				printk(KERN_DEBUG "%s: XMT status = %#x\n",
-					dev->name, xmt_status);
-			}
-		}
-		if (xmt_status & 0x000f) {
-			dev->stats.collisions += (xmt_status & 0x000f);
-		}
-
-		if ((xmt_status & 0x0040) == 0x0) {
-			dev->stats.tx_heartbeat_errors++;
-		}
-	}
-}
-
-static int eepro_ethtool_get_settings(struct net_device *dev,
-					struct ethtool_cmd *cmd)
-{
-	struct eepro_local	*lp = netdev_priv(dev);
-
-	cmd->supported = 	SUPPORTED_10baseT_Half |
-				SUPPORTED_10baseT_Full |
-				SUPPORTED_Autoneg;
-	cmd->advertising =	ADVERTISED_10baseT_Half |
-				ADVERTISED_10baseT_Full |
-				ADVERTISED_Autoneg;
-
-	if (GetBit(lp->word[5], ee_PortTPE)) {
-		cmd->supported |= SUPPORTED_TP;
-		cmd->advertising |= ADVERTISED_TP;
-	}
-	if (GetBit(lp->word[5], ee_PortBNC)) {
-		cmd->supported |= SUPPORTED_BNC;
-		cmd->advertising |= ADVERTISED_BNC;
-	}
-	if (GetBit(lp->word[5], ee_PortAUI)) {
-		cmd->supported |= SUPPORTED_AUI;
-		cmd->advertising |= ADVERTISED_AUI;
-	}
-
-	ethtool_cmd_speed_set(cmd, SPEED_10);
-
-	if (dev->if_port == TPE && lp->word[1] & ee_Duplex) {
-		cmd->duplex = DUPLEX_FULL;
-	}
-	else {
-		cmd->duplex = DUPLEX_HALF;
-	}
-
-	cmd->port = dev->if_port;
-	cmd->phy_address = dev->base_addr;
-	cmd->transceiver = XCVR_INTERNAL;
-
-	if (lp->word[0] & ee_AutoNeg) {
-		cmd->autoneg = 1;
-	}
-
-	return 0;
-}
-
-static void eepro_ethtool_get_drvinfo(struct net_device *dev,
-					struct ethtool_drvinfo *drvinfo)
-{
-	strcpy(drvinfo->driver, DRV_NAME);
-	strcpy(drvinfo->version, DRV_VERSION);
-	sprintf(drvinfo->bus_info, "ISA 0x%lx", dev->base_addr);
-}
-
-static const struct ethtool_ops eepro_ethtool_ops = {
-	.get_settings	= eepro_ethtool_get_settings,
-	.get_drvinfo 	= eepro_ethtool_get_drvinfo,
-};
-
-#ifdef MODULE
-
-#define MAX_EEPRO 8
-static struct net_device *dev_eepro[MAX_EEPRO];
-
-static int io[MAX_EEPRO] = {
-  [0 ... MAX_EEPRO-1] = -1
-};
-static int irq[MAX_EEPRO];
-static int mem[MAX_EEPRO] = {	/* Size of the rx buffer in KB */
-  [0 ... MAX_EEPRO-1] = RCV_DEFAULT_RAM/1024
-};
-static int autodetect;
-
-static int n_eepro;
-/* For linux 2.1.xx */
-
-MODULE_AUTHOR("Pascal Dupuis and others");
-MODULE_DESCRIPTION("Intel i82595 ISA EtherExpressPro10/10+ driver");
-MODULE_LICENSE("GPL");
-
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param_array(mem, int, NULL, 0);
-module_param(autodetect, int, 0);
-MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)");
-MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
-MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)");
-MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)");
-
-int __init init_module(void)
-{
-	struct net_device *dev;
-	int i;
-	if (io[0] == -1 && autodetect == 0) {
-		printk(KERN_WARNING "eepro_init_module: Probe is very dangerous in ISA boards!\n");
-		printk(KERN_WARNING "eepro_init_module: Please add \"autodetect=1\" to force probe\n");
-		return -ENODEV;
-	}
-	else if (autodetect) {
-		/* if autodetect is set then we must force detection */
-		for (i = 0; i < MAX_EEPRO; i++) {
-			io[i] = 0;
-		}
-
-		printk(KERN_INFO "eepro_init_module: Auto-detecting boards (May God protect us...)\n");
-	}
-
-	for (i = 0; i < MAX_EEPRO && io[i] != -1; i++) {
-		dev = alloc_etherdev(sizeof(struct eepro_local));
-		if (!dev)
-			break;
-
-		dev->mem_end = mem[i];
-		dev->base_addr = io[i];
-		dev->irq = irq[i];
-
-		if (do_eepro_probe(dev) == 0) {
-			dev_eepro[n_eepro++] = dev;
-			continue;
-		}
-		free_netdev(dev);
-		break;
-	}
-
-	if (n_eepro)
-		printk(KERN_INFO "%s", version);
-
-	return n_eepro ? 0 : -ENODEV;
-}
-
-void __exit
-cleanup_module(void)
-{
-	int i;
-
-	for (i=0; i<n_eepro; i++) {
-		struct net_device *dev = dev_eepro[i];
-		unregister_netdev(dev);
-		release_region(dev->base_addr, EEPRO_IO_EXTENT);
-		free_netdev(dev);
-	}
-}
-#endif /* MODULE */