e1000: Use netdev_<level>, pr_<level> and dev_<level>

This patch is an alternative to similar patch provided by Joe Perches.

Substitute DPRINTK macro for e_<level> that uses netdev_<level> and dev_<level>
similar to e1000e.
- Convert printk to pr_<level> where applicable.
- Use common #define pr_fmt for the driver.
- Use dev_<level> for displaying text in parts of the driver where the interface
  name is not assigned (like e1000_param.c).
- Better align test with the new macros.

CC: Joe Perches <joe@perches.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 files changed, 367 insertions, 405 deletions

diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 2f29c213185..40b62b406b0 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -81,23 +81,6 @@ struct e1000_adapter;
 
 #include "e1000_hw.h"
 
-#ifdef DBG
-#define E1000_DBG(args...) printk(KERN_DEBUG "e1000: " args)
-#else
-#define E1000_DBG(args...)
-#endif
-
-#define E1000_ERR(args...) printk(KERN_ERR "e1000: " args)
-
-#define PFX "e1000: "
-
-#define DPRINTK(nlevel, klevel, fmt, args...)				\
-do {									\
-	if (NETIF_MSG_##nlevel & adapter->msg_enable)			\
-		printk(KERN_##klevel PFX "%s: %s: " fmt,		\
-		       adapter->netdev->name, __func__, ##args);	\
-} while (0)
-
 #define E1000_MAX_INTR 10
 
 /* TX/RX descriptor defines */
@@ -335,6 +318,25 @@ enum e1000_state_t {
 	__E1000_DOWN
 };
 
+#undef pr_fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+extern struct net_device *e1000_get_hw_dev(struct e1000_hw *hw);
+#define e_dbg(format, arg...) \
+	netdev_dbg(e1000_get_hw_dev(hw), format, ## arg)
+#define e_err(format, arg...) \
+	netdev_err(adapter->netdev, format, ## arg)
+#define e_info(format, arg...) \
+	netdev_info(adapter->netdev, format, ## arg)
+#define e_warn(format, arg...) \
+	netdev_warn(adapter->netdev, format, ## arg)
+#define e_notice(format, arg...) \
+	netdev_notice(adapter->netdev, format, ## arg)
+#define e_dev_info(format, arg...) \
+	dev_info(&adapter->pdev->dev, format, ## arg)
+#define e_dev_warn(format, arg...) \
+	dev_warn(&adapter->pdev->dev, format, ## arg)
+
 extern char e1000_driver_name[];
 extern const char e1000_driver_version[];
 
@@ -352,5 +354,6 @@ extern bool e1000_has_link(struct e1000_adapter *adapter);
 extern void e1000_power_up_phy(struct e1000_adapter *);
 extern void e1000_set_ethtool_ops(struct net_device *netdev);
 extern void e1000_check_options(struct e1000_adapter *adapter);
+extern char *e1000_get_hw_dev_name(struct e1000_hw *hw);
 
 #endif /* _E1000_H_ */
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 616b405a1cb..d6931cabe42 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -346,7 +346,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data)
 
 	netdev->features &= ~NETIF_F_TSO6;
 
-	DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
+	e_info("TSO is %s\n", data ? "Enabled" : "Disabled");
 	adapter->tso_force = true;
 	return 0;
 }
@@ -714,9 +714,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg,
 		writel(write & test[i], address);
 		read = readl(address);
 		if (read != (write & test[i] & mask)) {
-			DPRINTK(DRV, ERR, "pattern test reg %04X failed: "
-				"got 0x%08X expected 0x%08X\n",
-				reg, read, (write & test[i] & mask));
+			e_info("pattern test reg %04X failed: "
+			       "got 0x%08X expected 0x%08X\n",
+			       reg, read, (write & test[i] & mask));
 			*data = reg;
 			return true;
 		}
@@ -734,9 +734,9 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg,
 	writel(write & mask, address);
 	read = readl(address);
 	if ((read & mask) != (write & mask)) {
-		DPRINTK(DRV, ERR, "set/check reg %04X test failed: "
-			"got 0x%08X expected 0x%08X\n",
-			reg, (read & mask), (write & mask));
+		e_err("set/check reg %04X test failed: "
+		      "got 0x%08X expected 0x%08X\n",
+		      reg, (read & mask), (write & mask));
 		*data = reg;
 		return true;
 	}
@@ -779,8 +779,8 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	ew32(STATUS, toggle);
 	after = er32(STATUS) & toggle;
 	if (value != after) {
-		DPRINTK(DRV, ERR, "failed STATUS register test got: "
-		        "0x%08X expected: 0x%08X\n", after, value);
+		e_err("failed STATUS register test got: "
+		      "0x%08X expected: 0x%08X\n", after, value);
 		*data = 1;
 		return 1;
 	}
@@ -894,8 +894,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 		*data = 1;
 		return -1;
 	}
-	DPRINTK(HW, INFO, "testing %s interrupt\n",
-	        (shared_int ? "shared" : "unshared"));
+	e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
 
 	/* Disable all the interrupts */
 	ew32(IMC, 0xFFFFFFFF);
@@ -1564,7 +1563,7 @@ static void e1000_diag_test(struct net_device *netdev,
 		u8 forced_speed_duplex = hw->forced_speed_duplex;
 		u8 autoneg = hw->autoneg;
 
-		DPRINTK(HW, INFO, "offline testing starting\n");
+		e_info("offline testing starting\n");
 
 		/* Link test performed before hardware reset so autoneg doesn't
 		 * interfere with test result */
@@ -1604,7 +1603,7 @@ static void e1000_diag_test(struct net_device *netdev,
 		if (if_running)
 			dev_open(netdev);
 	} else {
-		DPRINTK(HW, INFO, "online testing starting\n");
+		e_info("online testing starting\n");
 		/* Online tests */
 		if (e1000_link_test(adapter, &data[4]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1697,7 +1696,7 @@ static void e1000_get_wol(struct net_device *netdev,
 		wol->supported &= ~WAKE_UCAST;
 
 		if (adapter->wol & E1000_WUFC_EX)
-			DPRINTK(DRV, ERR, "Interface does not support "
+			e_err("Interface does not support "
 		        "directed (unicast) frame wake-up packets\n");
 		break;
 	default:
@@ -1731,8 +1730,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	switch (hw->device_id) {
 	case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
 		if (wol->wolopts & WAKE_UCAST) {
-			DPRINTK(DRV, ERR, "Interface does not support "
-		        "directed (unicast) frame wake-up packets\n");
+			e_err("Interface does not support "
+			      "directed (unicast) frame wake-up packets\n");
 			return -EOPNOTSUPP;
 		}
 		break;
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index e2b6e6e7ba6..c7e242b69a1 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -30,7 +30,7 @@
  * Shared functions for accessing and configuring the MAC
  */
 
-#include "e1000_hw.h"
+#include "e1000.h"
 
 static s32 e1000_check_downshift(struct e1000_hw *hw);
 static s32 e1000_check_polarity(struct e1000_hw *hw,
@@ -114,7 +114,7 @@ static DEFINE_SPINLOCK(e1000_eeprom_lock);
  */
 static s32 e1000_set_phy_type(struct e1000_hw *hw)
 {
-	DEBUGFUNC("e1000_set_phy_type");
+	e_dbg("e1000_set_phy_type");
 
 	if (hw->mac_type == e1000_undefined)
 		return -E1000_ERR_PHY_TYPE;
@@ -152,7 +152,7 @@ static void e1000_phy_init_script(struct e1000_hw *hw)
 	u32 ret_val;
 	u16 phy_saved_data;
 
-	DEBUGFUNC("e1000_phy_init_script");
+	e_dbg("e1000_phy_init_script");
 
 	if (hw->phy_init_script) {
 		msleep(20);
@@ -245,7 +245,7 @@ static void e1000_phy_init_script(struct e1000_hw *hw)
  */
 s32 e1000_set_mac_type(struct e1000_hw *hw)
 {
-	DEBUGFUNC("e1000_set_mac_type");
+	e_dbg("e1000_set_mac_type");
 
 	switch (hw->device_id) {
 	case E1000_DEV_ID_82542:
@@ -354,7 +354,7 @@ void e1000_set_media_type(struct e1000_hw *hw)
 {
 	u32 status;
 
-	DEBUGFUNC("e1000_set_media_type");
+	e_dbg("e1000_set_media_type");
 
 	if (hw->mac_type != e1000_82543) {
 		/* tbi_compatibility is only valid on 82543 */
@@ -401,16 +401,16 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
 	u32 led_ctrl;
 	s32 ret_val;
 
-	DEBUGFUNC("e1000_reset_hw");
+	e_dbg("e1000_reset_hw");
 
 	/* For 82542 (rev 2.0), disable MWI before issuing a device reset */
 	if (hw->mac_type == e1000_82542_rev2_0) {
-		DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+		e_dbg("Disabling MWI on 82542 rev 2.0\n");
 		e1000_pci_clear_mwi(hw);
 	}
 
 	/* Clear interrupt mask to stop board from generating interrupts */
-	DEBUGOUT("Masking off all interrupts\n");
+	e_dbg("Masking off all interrupts\n");
 	ew32(IMC, 0xffffffff);
 
 	/* Disable the Transmit and Receive units.  Then delay to allow
@@ -442,7 +442,7 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
 	 * the current PCI configuration.  The global reset bit is self-
 	 * clearing, and should clear within a microsecond.
 	 */
-	DEBUGOUT("Issuing a global reset to MAC\n");
+	e_dbg("Issuing a global reset to MAC\n");
 
 	switch (hw->mac_type) {
 	case e1000_82544:
@@ -516,7 +516,7 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
 	}
 
 	/* Clear interrupt mask to stop board from generating interrupts */
-	DEBUGOUT("Masking off all interrupts\n");
+	e_dbg("Masking off all interrupts\n");
 	ew32(IMC, 0xffffffff);
 
 	/* Clear any pending interrupt events. */
@@ -549,12 +549,12 @@ s32 e1000_init_hw(struct e1000_hw *hw)
 	u32 mta_size;
 	u32 ctrl_ext;
 
-	DEBUGFUNC("e1000_init_hw");
+	e_dbg("e1000_init_hw");
 
 	/* Initialize Identification LED */
 	ret_val = e1000_id_led_init(hw);
 	if (ret_val) {
-		DEBUGOUT("Error Initializing Identification LED\n");
+		e_dbg("Error Initializing Identification LED\n");
 		return ret_val;
 	}
 
@@ -562,14 +562,14 @@ s32 e1000_init_hw(struct e1000_hw *hw)
 	e1000_set_media_type(hw);
 
 	/* Disabling VLAN filtering. */
-	DEBUGOUT("Initializing the IEEE VLAN\n");
+	e_dbg("Initializing the IEEE VLAN\n");
 	if (hw->mac_type < e1000_82545_rev_3)
 		ew32(VET, 0);
 	e1000_clear_vfta(hw);
 
 	/* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
 	if (hw->mac_type == e1000_82542_rev2_0) {
-		DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+		e_dbg("Disabling MWI on 82542 rev 2.0\n");
 		e1000_pci_clear_mwi(hw);
 		ew32(RCTL, E1000_RCTL_RST);
 		E1000_WRITE_FLUSH();
@@ -591,7 +591,7 @@ s32 e1000_init_hw(struct e1000_hw *hw)
 	}
 
 	/* Zero out the Multicast HASH table */
-	DEBUGOUT("Zeroing the MTA\n");
+	e_dbg("Zeroing the MTA\n");
 	mta_size = E1000_MC_TBL_SIZE;
 	for (i = 0; i < mta_size; i++) {
 		E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
@@ -662,7 +662,7 @@ static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
 	u16 eeprom_data;
 	s32 ret_val;
 
-	DEBUGFUNC("e1000_adjust_serdes_amplitude");
+	e_dbg("e1000_adjust_serdes_amplitude");
 
 	if (hw->media_type != e1000_media_type_internal_serdes)
 		return E1000_SUCCESS;
@@ -709,7 +709,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 eeprom_data;
 
-	DEBUGFUNC("e1000_setup_link");
+	e_dbg("e1000_setup_link");
 
 	/* Read and store word 0x0F of the EEPROM. This word contains bits
 	 * that determine the hardware's default PAUSE (flow control) mode,
@@ -723,7 +723,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)
 		ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
 					    1, &eeprom_data);
 		if (ret_val) {
-			DEBUGOUT("EEPROM Read Error\n");
+			e_dbg("EEPROM Read Error\n");
 			return -E1000_ERR_EEPROM;
 		}
 		if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
@@ -747,7 +747,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)
 
 	hw->original_fc = hw->fc;
 
-	DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc);
+	e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc);
 
 	/* Take the 4 bits from EEPROM word 0x0F that determine the initial
 	 * polarity value for the SW controlled pins, and setup the
@@ -760,7 +760,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)
 		ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
 					    1, &eeprom_data);
 		if (ret_val) {
-			DEBUGOUT("EEPROM Read Error\n");
+			e_dbg("EEPROM Read Error\n");
 			return -E1000_ERR_EEPROM;
 		}
 		ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
@@ -777,8 +777,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)
 	 * control is disabled, because it does not hurt anything to
 	 * initialize these registers.
 	 */
-	DEBUGOUT
-	    ("Initializing the Flow Control address, type and timer regs\n");
+	e_dbg("Initializing the Flow Control address, type and timer regs\n");
 
 	ew32(FCT, FLOW_CONTROL_TYPE);
 	ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
@@ -827,7 +826,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
 	u32 signal = 0;
 	s32 ret_val;
 
-	DEBUGFUNC("e1000_setup_fiber_serdes_link");
+	e_dbg("e1000_setup_fiber_serdes_link");
 
 	/* On adapters with a MAC newer than 82544, SWDP 1 will be
 	 * set when the optics detect a signal. On older adapters, it will be
@@ -893,7 +892,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
 		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
 		break;
 	default:
-		DEBUGOUT("Flow control param set incorrectly\n");
+		e_dbg("Flow control param set incorrectly\n");
 		return -E1000_ERR_CONFIG;
 		break;
 	}
@@ -904,7 +903,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
 	 * link-up status bit will be set and the flow control enable bits (RFCE
 	 * and TFCE) will be set according to their negotiated value.
 	 */
-	DEBUGOUT("Auto-negotiation enabled\n");
+	e_dbg("Auto-negotiation enabled\n");
 
 	ew32(TXCW, txcw);
 	ew32(CTRL, ctrl);
@@ -921,7 +920,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
 	 */
 	if (hw->media_type == e1000_media_type_internal_serdes ||
 	    (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) {
-		DEBUGOUT("Looking for Link\n");
+		e_dbg("Looking for Link\n");
 		for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
 			msleep(10);
 			status = er32(STATUS);
@@ -929,7 +928,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
 				break;
 		}
 		if (i == (LINK_UP_TIMEOUT / 10)) {
-			DEBUGOUT("Never got a valid link from auto-neg!!!\n");
+			e_dbg("Never got a valid link from auto-neg!!!\n");
 			hw->autoneg_failed = 1;
 			/* AutoNeg failed to achieve a link, so we'll call
 			 * e1000_check_for_link. This routine will force the link up if
@@ -938,16 +937,16 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
 			 */
 			ret_val = e1000_check_for_link(hw);
 			if (ret_val) {
-				DEBUGOUT("Error while checking for link\n");
+				e_dbg("Error while checking for link\n");
 				return ret_val;
 			}
 			hw->autoneg_failed = 0;
 		} else {
 			hw->autoneg_failed = 0;
-			DEBUGOUT("Valid Link Found\n");
+			e_dbg("Valid Link Found\n");
 		}
 	} else {
-		DEBUGOUT("No Signal Detected\n");
+		e_dbg("No Signal Detected\n");
 	}
 	return E1000_SUCCESS;
 }
@@ -964,7 +963,7 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 phy_data;
 
-	DEBUGFUNC("e1000_copper_link_preconfig");
+	e_dbg("e1000_copper_link_preconfig");
 
 	ctrl = er32(CTRL);
 	/* With 82543, we need to force speed and duplex on the MAC equal to what
@@ -987,10 +986,10 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
 	/* Make sure we have a valid PHY */
 	ret_val = e1000_detect_gig_phy(hw);
 	if (ret_val) {
-		DEBUGOUT("Error, did not detect valid phy.\n");
+		e_dbg("Error, did not detect valid phy.\n");
 		return ret_val;
 	}
-	DEBUGOUT1("Phy ID = %x\n", hw->phy_id);
+	e_dbg("Phy ID = %x\n", hw->phy_id);
 
 	/* Set PHY to class A mode (if necessary) */
 	ret_val = e1000_set_phy_mode(hw);
@@ -1025,14 +1024,14 @@ static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 phy_data;
 
-	DEBUGFUNC("e1000_copper_link_igp_setup");
+	e_dbg("e1000_copper_link_igp_setup");
 
 	if (hw->phy_reset_disable)
 		return E1000_SUCCESS;
 
 	ret_val = e1000_phy_reset(hw);
 	if (ret_val) {
-		DEBUGOUT("Error Resetting the PHY\n");
+		e_dbg("Error Resetting the PHY\n");
 		return ret_val;
 	}
 
@@ -1049,7 +1048,7 @@ static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
 		/* disable lplu d3 during driver init */
 		ret_val = e1000_set_d3_lplu_state(hw, false);
 		if (ret_val) {
-			DEBUGOUT("Error Disabling LPLU D3\n");
+			e_dbg("Error Disabling LPLU D3\n");
 			return ret_val;
 		}
 	}
@@ -1166,7 +1165,7 @@ static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 phy_data;
 
-	DEBUGFUNC("e1000_copper_link_mgp_setup");
+	e_dbg("e1000_copper_link_mgp_setup");
 
 	if (hw->phy_reset_disable)
 		return E1000_SUCCESS;
@@ -1255,7 +1254,7 @@ static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw)
 	/* SW Reset the PHY so all changes take effect */
 	ret_val = e1000_phy_reset(hw);
 	if (ret_val) {
-		DEBUGOUT("Error Resetting the PHY\n");
+		e_dbg("Error Resetting the PHY\n");
 		return ret_val;
 	}
 
@@ -1274,7 +1273,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 phy_data;
 
-	DEBUGFUNC("e1000_copper_link_autoneg");
+	e_dbg("e1000_copper_link_autoneg");
 
 	/* Perform some bounds checking on the hw->autoneg_advertised
 	 * parameter.  If this variable is zero, then set it to the default.
@@ -1287,13 +1286,13 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 	if (hw->autoneg_advertised == 0)
 		hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 
-	DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
+	e_dbg("Reconfiguring auto-neg advertisement params\n");
 	ret_val = e1000_phy_setup_autoneg(hw);
 	if (ret_val) {
-		DEBUGOUT("Error Setting up Auto-Negotiation\n");
+		e_dbg("Error Setting up Auto-Negotiation\n");
 		return ret_val;
 	}
-	DEBUGOUT("Restarting Auto-Neg\n");
+	e_dbg("Restarting Auto-Neg\n");
 
 	/* Restart auto-negotiation by setting the Auto Neg Enable bit and
 	 * the Auto Neg Restart bit in the PHY control register.
@@ -1313,7 +1312,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 	if (hw->wait_autoneg_complete) {
 		ret_val = e1000_wait_autoneg(hw);
 		if (ret_val) {
-			DEBUGOUT
+			e_dbg
 			    ("Error while waiting for autoneg to complete\n");
 			return ret_val;
 		}
@@ -1340,20 +1339,20 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
 {
 	s32 ret_val;
-	DEBUGFUNC("e1000_copper_link_postconfig");
+	e_dbg("e1000_copper_link_postconfig");
 
 	if (hw->mac_type >= e1000_82544) {
 		e1000_config_collision_dist(hw);
 	} else {
 		ret_val = e1000_config_mac_to_phy(hw);
 		if (ret_val) {
-			DEBUGOUT("Error configuring MAC to PHY settings\n");
+			e_dbg("Error configuring MAC to PHY settings\n");
 			return ret_val;
 		}
 	}
 	ret_val = e1000_config_fc_after_link_up(hw);
 	if (ret_val) {
-		DEBUGOUT("Error Configuring Flow Control\n");
+		e_dbg("Error Configuring Flow Control\n");
 		return ret_val;
 	}
 
@@ -1361,7 +1360,7 @@ static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
 	if (hw->phy_type == e1000_phy_igp) {
 		ret_val = e1000_config_dsp_after_link_change(hw, true);
 		if (ret_val) {
-			DEBUGOUT("Error Configuring DSP after link up\n");
+			e_dbg("Error Configuring DSP after link up\n");
 			return ret_val;
 		}
 	}
@@ -1381,7 +1380,7 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw)
 	u16 i;
 	u16 phy_data;
 
-	DEBUGFUNC("e1000_setup_copper_link");
+	e_dbg("e1000_setup_copper_link");
 
 	/* Check if it is a valid PHY and set PHY mode if necessary. */
 	ret_val = e1000_copper_link_preconfig(hw);
@@ -1407,10 +1406,10 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw)
 	} else {
 		/* PHY will be set to 10H, 10F, 100H,or 100F
 		 * depending on value from forced_speed_duplex. */
-		DEBUGOUT("Forcing speed and duplex\n");
+		e_dbg("Forcing speed and duplex\n");
 		ret_val = e1000_phy_force_speed_duplex(hw);
 		if (ret_val) {
-			DEBUGOUT("Error Forcing Speed and Duplex\n");
+			e_dbg("Error Forcing Speed and Duplex\n");
 			return ret_val;
 		}
 	}
@@ -1432,13 +1431,13 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw)
 			if (ret_val)
 				return ret_val;
 
-			DEBUGOUT("Valid link established!!!\n");
+			e_dbg("Valid link established!!!\n");
 			return E1000_SUCCESS;
 		}
 		udelay(10);
 	}
 
-	DEBUGOUT("Unable to establish link!!!\n");
+	e_dbg("Unable to establish link!!!\n");
 	return E1000_SUCCESS;
 }
 
@@ -1454,7 +1453,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 	u16 mii_autoneg_adv_reg;
 	u16 mii_1000t_ctrl_reg;
 
-	DEBUGFUNC("e1000_phy_setup_autoneg");
+	e_dbg("e1000_phy_setup_autoneg");
 
 	/* Read the MII Auto-Neg Advertisement Register (Address 4). */
 	ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
@@ -1481,41 +1480,41 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 	mii_autoneg_adv_reg &= ~REG4_SPEED_MASK;
 	mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
 
-	DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised);
+	e_dbg("autoneg_advertised %x\n", hw->autoneg_advertised);
 
 	/* Do we want to advertise 10 Mb Half Duplex? */
 	if (hw->autoneg_advertised & ADVERTISE_10_HALF) {
-		DEBUGOUT("Advertise 10mb Half duplex\n");
+		e_dbg("Advertise 10mb Half duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
 	}
 
 	/* Do we want to advertise 10 Mb Full Duplex? */
 	if (hw->autoneg_advertised & ADVERTISE_10_FULL) {
-		DEBUGOUT("Advertise 10mb Full duplex\n");
+		e_dbg("Advertise 10mb Full duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
 	}
 
 	/* Do we want to advertise 100 Mb Half Duplex? */
 	if (hw->autoneg_advertised & ADVERTISE_100_HALF) {
-		DEBUGOUT("Advertise 100mb Half duplex\n");
+		e_dbg("Advertise 100mb Half duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
 	}
 
 	/* Do we want to advertise 100 Mb Full Duplex? */
 	if (hw->autoneg_advertised & ADVERTISE_100_FULL) {
-		DEBUGOUT("Advertise 100mb Full duplex\n");
+		e_dbg("Advertise 100mb Full duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
 	}
 
 	/* We do not allow the Phy to advertise 1000 Mb Half Duplex */
 	if (hw->autoneg_advertised & ADVERTISE_1000_HALF) {
-		DEBUGOUT
+		e_dbg
 		    ("Advertise 1000mb Half duplex requested, request denied!\n");
 	}
 
 	/* Do we want to advertise 1000 Mb Full Duplex? */
 	if (hw->autoneg_advertised & ADVERTISE_1000_FULL) {
-		DEBUGOUT("Advertise 1000mb Full duplex\n");
+		e_dbg("Advertise 1000mb Full duplex\n");
 		mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
 	}
 
@@ -1568,7 +1567,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
 		break;
 	default:
-		DEBUGOUT("Flow control param set incorrectly\n");
+		e_dbg("Flow control param set incorrectly\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -1576,7 +1575,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+	e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
 
 	ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
 	if (ret_val)
@@ -1600,12 +1599,12 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
 	u16 phy_data;
 	u16 i;
 
-	DEBUGFUNC("e1000_phy_force_speed_duplex");
+	e_dbg("e1000_phy_force_speed_duplex");
 
 	/* Turn off Flow control if we are forcing speed and duplex. */
 	hw->fc = E1000_FC_NONE;
 
-	DEBUGOUT1("hw->fc = %d\n", hw->fc);
+	e_dbg("hw->fc = %d\n", hw->fc);
 
 	/* Read the Device Control Register. */
 	ctrl = er32(CTRL);
@@ -1634,14 +1633,14 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
 		 */
 		ctrl |= E1000_CTRL_FD;
 		mii_ctrl_reg |= MII_CR_FULL_DUPLEX;
-		DEBUGOUT("Full Duplex\n");
+		e_dbg("Full Duplex\n");
 	} else {
 		/* We want to force half duplex so we CLEAR the full duplex bits in
 		 * the Device and MII Control Registers.
 		 */
 		ctrl &= ~E1000_CTRL_FD;
 		mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX;
-		DEBUGOUT("Half Duplex\n");
+		e_dbg("Half Duplex\n");
 	}
 
 	/* Are we forcing 100Mbps??? */
@@ -1651,13 +1650,13 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
 		ctrl |= E1000_CTRL_SPD_100;
 		mii_ctrl_reg |= MII_CR_SPEED_100;
 		mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
-		DEBUGOUT("Forcing 100mb ");
+		e_dbg("Forcing 100mb ");
 	} else {
 		/* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */
 		ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
 		mii_ctrl_reg |= MII_CR_SPEED_10;
 		mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
-		DEBUGOUT("Forcing 10mb ");
+		e_dbg("Forcing 10mb ");
 	}
 
 	e1000_config_collision_dist(hw);
@@ -1680,7 +1679,7 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
 		if (ret_val)
 			return ret_val;
 
-		DEBUGOUT1("M88E1000 PSCR: %x\n", phy_data);
+		e_dbg("M88E1000 PSCR: %x\n", phy_data);
 
 		/* Need to reset the PHY or these changes will be ignored */
 		mii_ctrl_reg |= MII_CR_RESET;
@@ -1720,7 +1719,7 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
 	 */
 	if (hw->wait_autoneg_complete) {
 		/* We will wait for autoneg to complete. */
-		DEBUGOUT("Waiting for forced speed/duplex link.\n");
+		e_dbg("Waiting for forced speed/duplex link.\n");
 		mii_status_reg = 0;
 
 		/* We will wait for autoneg to complete or 4.5 seconds to expire. */
@@ -1746,7 +1745,7 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
 			/* We didn't get link.  Reset the DSP and wait again for link. */
 			ret_val = e1000_phy_reset_dsp(hw);
 			if (ret_val) {
-				DEBUGOUT("Error Resetting PHY DSP\n");
+				e_dbg("Error Resetting PHY DSP\n");
 				return ret_val;
 			}
 		}
@@ -1826,7 +1825,7 @@ void e1000_config_collision_dist(struct e1000_hw *hw)
 {
 	u32 tctl, coll_dist;
 
-	DEBUGFUNC("e1000_config_collision_dist");
+	e_dbg("e1000_config_collision_dist");
 
 	if (hw->mac_type < e1000_82543)
 		coll_dist = E1000_COLLISION_DISTANCE_82542;
@@ -1857,7 +1856,7 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 phy_data;
 
-	DEBUGFUNC("e1000_config_mac_to_phy");
+	e_dbg("e1000_config_mac_to_phy");
 
 	/* 82544 or newer MAC, Auto Speed Detection takes care of
 	 * MAC speed/duplex configuration.*/
@@ -1913,7 +1912,7 @@ s32 e1000_force_mac_fc(struct e1000_hw *hw)
 {
 	u32 ctrl;
 
-	DEBUGFUNC("e1000_force_mac_fc");
+	e_dbg("e1000_force_mac_fc");
 
 	/* Get the current configuration of the Device Control Register */
 	ctrl = er32(CTRL);
@@ -1952,7 +1951,7 @@ s32 e1000_force_mac_fc(struct e1000_hw *hw)
 		ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
 		break;
 	default:
-		DEBUGOUT("Flow control param set incorrectly\n");
+		e_dbg("Flow control param set incorrectly\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -1984,7 +1983,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
 	u16 speed;
 	u16 duplex;
 
-	DEBUGFUNC("e1000_config_fc_after_link_up");
+	e_dbg("e1000_config_fc_after_link_up");
 
 	/* Check for the case where we have fiber media and auto-neg failed
 	 * so we had to force link.  In this case, we need to force the
@@ -1997,7 +1996,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
 		&& (!hw->autoneg))) {
 		ret_val = e1000_force_mac_fc(hw);
 		if (ret_val) {
-			DEBUGOUT("Error forcing flow control settings\n");
+			e_dbg("Error forcing flow control settings\n");
 			return ret_val;
 		}
 	}
@@ -2079,10 +2078,10 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
 				 */
 				if (hw->original_fc == E1000_FC_FULL) {
 					hw->fc = E1000_FC_FULL;
-					DEBUGOUT("Flow Control = FULL.\n");
+					e_dbg("Flow Control = FULL.\n");
 				} else {
 					hw->fc = E1000_FC_RX_PAUSE;
-					DEBUGOUT
+					e_dbg
 					    ("Flow Control = RX PAUSE frames only.\n");
 				}
 			}
@@ -2100,7 +2099,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
 				 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
 			{
 				hw->fc = E1000_FC_TX_PAUSE;
-				DEBUGOUT
+				e_dbg
 				    ("Flow Control = TX PAUSE frames only.\n");
 			}
 			/* For transmitting PAUSE frames ONLY.
@@ -2117,7 +2116,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
 				 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
 			{
 				hw->fc = E1000_FC_RX_PAUSE;
-				DEBUGOUT
+				e_dbg
 				    ("Flow Control = RX PAUSE frames only.\n");
 			}
 			/* Per the IEEE spec, at this point flow control should be
@@ -2144,10 +2143,10 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
 				  hw->original_fc == E1000_FC_TX_PAUSE) ||
 				 hw->fc_strict_ieee) {
 				hw->fc = E1000_FC_NONE;
-				DEBUGOUT("Flow Control = NONE.\n");
+				e_dbg("Flow Control = NONE.\n");
 			} else {
 				hw->fc = E1000_FC_RX_PAUSE;
-				DEBUGOUT
+				e_dbg
 				    ("Flow Control = RX PAUSE frames only.\n");
 			}
 
@@ -2158,7 +2157,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
 			ret_val =
 			    e1000_get_speed_and_duplex(hw, &speed, &duplex);
 			if (ret_val) {
-				DEBUGOUT
+				e_dbg
 				    ("Error getting link speed and duplex\n");
 				return ret_val;
 			}
@@ -2171,12 +2170,12 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
 			 */
 			ret_val = e1000_force_mac_fc(hw);
 			if (ret_val) {
-				DEBUGOUT
+				e_dbg
 				    ("Error forcing flow control settings\n");
 				return ret_val;
 			}
 		} else {
-			DEBUGOUT
+			e_dbg
 			    ("Copper PHY and Auto Neg has not completed.\n");
 		}
 	}
@@ -2197,7 +2196,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
 	u32 status;
 	s32 ret_val = E1000_SUCCESS;
 
-	DEBUGFUNC("e1000_check_for_serdes_link_generic");
+	e_dbg("e1000_check_for_serdes_link_generic");
 
 	ctrl = er32(CTRL);
 	status = er32(STATUS);
@@ -2216,7 +2215,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
 			hw->autoneg_failed = 1;
 			goto out;
 		}
-		DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
+		e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
 
 		/* Disable auto-negotiation in the TXCW register */
 		ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE));
@@ -2229,7 +2228,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
 		/* Configure Flow Control after forcing link up. */
 		ret_val = e1000_config_fc_after_link_up(hw);
 		if (ret_val) {
-			DEBUGOUT("Error configuring flow control\n");
+			e_dbg("Error configuring flow control\n");
 			goto out;
 		}
 	} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
@@ -2239,7 +2238,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
 		 * and disable forced link in the Device Control register
 		 * in an attempt to auto-negotiate with our link partner.
 		 */
-		DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
+		e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
 		ew32(TXCW, hw->txcw);
 		ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
 
@@ -2256,11 +2255,11 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
 		if (rxcw & E1000_RXCW_SYNCH) {
 			if (!(rxcw & E1000_RXCW_IV)) {
 				hw->serdes_has_link = true;
-				DEBUGOUT("SERDES: Link up - forced.\n");
+				e_dbg("SERDES: Link up - forced.\n");
 			}
 		} else {
 			hw->serdes_has_link = false;
-			DEBUGOUT("SERDES: Link down - force failed.\n");
+			e_dbg("SERDES: Link down - force failed.\n");
 		}
 	}
 
@@ -2273,20 +2272,20 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
 			if (rxcw & E1000_RXCW_SYNCH) {
 				if (!(rxcw & E1000_RXCW_IV)) {
 					hw->serdes_has_link = true;
-					DEBUGOUT("SERDES: Link up - autoneg "
+					e_dbg("SERDES: Link up - autoneg "
 						 "completed successfully.\n");
 				} else {
 					hw->serdes_has_link = false;
-					DEBUGOUT("SERDES: Link down - invalid"
+					e_dbg("SERDES: Link down - invalid"
 						 "codewords detected in autoneg.\n");
 				}
 			} else {
 				hw->serdes_has_link = false;
-				DEBUGOUT("SERDES: Link down - no sync.\n");
+				e_dbg("SERDES: Link down - no sync.\n");
 			}
 		} else {
 			hw->serdes_has_link = false;
-			DEBUGOUT("SERDES: Link down - autoneg failed\n");
+			e_dbg("SERDES: Link down - autoneg failed\n");
 		}
 	}
 
@@ -2312,7 +2311,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 phy_data;
 
-	DEBUGFUNC("e1000_check_for_link");
+	e_dbg("e1000_check_for_link");
 
 	ctrl = er32(CTRL);
 	status = er32(STATUS);
@@ -2407,7 +2406,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
 		else {
 			ret_val = e1000_config_mac_to_phy(hw);
 			if (ret_val) {
-				DEBUGOUT
+				e_dbg
 				    ("Error configuring MAC to PHY settings\n");
 				return ret_val;
 			}
@@ -2419,7 +2418,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
 		 */
 		ret_val = e1000_config_fc_after_link_up(hw);
 		if (ret_val) {
-			DEBUGOUT("Error configuring flow control\n");
+			e_dbg("Error configuring flow control\n");
 			return ret_val;
 		}
 
@@ -2435,7 +2434,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
 			ret_val =
 			    e1000_get_speed_and_duplex(hw, &speed, &duplex);
 			if (ret_val) {
-				DEBUGOUT
+				e_dbg
 				    ("Error getting link speed and duplex\n");
 				return ret_val;
 			}
@@ -2487,30 +2486,30 @@ s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
 	s32 ret_val;
 	u16 phy_data;
 
-	DEBUGFUNC("e1000_get_speed_and_duplex");
+	e_dbg("e1000_get_speed_and_duplex");
 
 	if (hw->mac_type >= e1000_82543) {
 		status = er32(STATUS);
 		if (status & E1000_STATUS_SPEED_1000) {
 			*speed = SPEED_1000;
-			DEBUGOUT("1000 Mbs, ");
+			e_dbg("1000 Mbs, ");
 		} else if (status & E1000_STATUS_SPEED_100) {
 			*speed = SPEED_100;
-			DEBUGOUT("100 Mbs, ");
+			e_dbg("100 Mbs, ");
 		} else {
 			*speed = SPEED_10;
-			DEBUGOUT("10 Mbs, ");
+			e_dbg("10 Mbs, ");
 		}
 
 		if (status & E1000_STATUS_FD) {
 			*duplex = FULL_DUPLEX;
-			DEBUGOU