e1000: gather hardware bit tweaks.

Several hardware bits were set all over the driver and have been
consolidated into a single function.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>

1 files changed, 131 insertions, 24 deletions

diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 6ec5cdddb5a..dceaf5bd5f5 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -61,6 +61,7 @@ static int32_t e1000_id_led_init(struct e1000_hw *hw);
 static int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size);
 static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw);
 static void e1000_init_rx_addrs(struct e1000_hw *hw);
+static void e1000_initialize_hardware_bits(struct e1000_hw *hw);
 static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw);
 static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
 static int32_t e1000_mng_enable_host_if(struct e1000_hw *hw);
@@ -716,6 +717,123 @@ e1000_reset_hw(struct e1000_hw *hw)
 }
 
 /******************************************************************************
+ *
+ * Initialize a number of hardware-dependent bits
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * This function contains hardware limitation workarounds for PCI-E adapters
+ *
+ *****************************************************************************/
+static void
+e1000_initialize_hardware_bits(struct e1000_hw *hw)
+{
+    if ((hw->mac_type >= e1000_82571) && (!hw->initialize_hw_bits_disable)) {
+        /* Settings common to all PCI-express silicon */
+        uint32_t reg_ctrl, reg_ctrl_ext;
+        uint32_t reg_tarc0, reg_tarc1;
+        uint32_t reg_tctl;
+        uint32_t reg_txdctl, reg_txdctl1;
+
+        /* link autonegotiation/sync workarounds */
+        reg_tarc0 = E1000_READ_REG(hw, TARC0);
+        reg_tarc0 &= ~((1 << 30)|(1 << 29)|(1 << 28)|(1 << 27));
+
+        /* Enable not-done TX descriptor counting */
+        reg_txdctl = E1000_READ_REG(hw, TXDCTL);
+        reg_txdctl |= E1000_TXDCTL_COUNT_DESC;
+        E1000_WRITE_REG(hw, TXDCTL, reg_txdctl);
+        reg_txdctl1 = E1000_READ_REG(hw, TXDCTL1);
+        reg_txdctl1 |= E1000_TXDCTL_COUNT_DESC;
+        E1000_WRITE_REG(hw, TXDCTL1, reg_txdctl1);
+
+        switch (hw->mac_type) {
+            case e1000_82571:
+            case e1000_82572:
+                /* Clear PHY TX compatible mode bits */
+                reg_tarc1 = E1000_READ_REG(hw, TARC1);
+                reg_tarc1 &= ~((1 << 30)|(1 << 29));
+
+                /* link autonegotiation/sync workarounds */
+                reg_tarc0 |= ((1 << 26)|(1 << 25)|(1 << 24)|(1 << 23));
+
+                /* TX ring control fixes */
+                reg_tarc1 |= ((1 << 26)|(1 << 25)|(1 << 24));
+
+                /* Multiple read bit is reversed polarity */
+                reg_tctl = E1000_READ_REG(hw, TCTL);
+                if (reg_tctl & E1000_TCTL_MULR)
+                    reg_tarc1 &= ~(1 << 28);
+                else
+                    reg_tarc1 |= (1 << 28);
+
+                E1000_WRITE_REG(hw, TARC1, reg_tarc1);
+                break;
+            case e1000_82573:
+                reg_ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+                reg_ctrl_ext &= ~(1 << 23);
+                reg_ctrl_ext |= (1 << 22);
+
+                /* TX byte count fix */
+                reg_ctrl = E1000_READ_REG(hw, CTRL);
+                reg_ctrl &= ~(1 << 29);
+
+                E1000_WRITE_REG(hw, CTRL_EXT, reg_ctrl_ext);
+                E1000_WRITE_REG(hw, CTRL, reg_ctrl);
+                break;
+            case e1000_80003es2lan:
+                /* improve small packet performace for fiber/serdes */
+                if ((hw->media_type == e1000_media_type_fiber) ||
+                    (hw->media_type == e1000_media_type_internal_serdes)) {
+                    reg_tarc0 &= ~(1 << 20);
+                }
+
+                /* Multiple read bit is reversed polarity */
+                reg_tctl = E1000_READ_REG(hw, TCTL);
+                reg_tarc1 = E1000_READ_REG(hw, TARC1);
+                if (reg_tctl & E1000_TCTL_MULR)
+                    reg_tarc1 &= ~(1 << 28);
+                else
+                    reg_tarc1 |= (1 << 28);
+
+                E1000_WRITE_REG(hw, TARC1, reg_tarc1);
+                break;
+            case e1000_ich8lan:
+                /* Reduce concurrent DMA requests to 3 from 4 */
+                if ((hw->revision_id < 3) ||
+                    ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) &&
+                     (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))
+                    reg_tarc0 |= ((1 << 29)|(1 << 28));
+
+                reg_ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+                reg_ctrl_ext |= (1 << 22);
+                E1000_WRITE_REG(hw, CTRL_EXT, reg_ctrl_ext);
+
+                /* workaround TX hang with TSO=on */
+                reg_tarc0 |= ((1 << 27)|(1 << 26)|(1 << 24)|(1 << 23));
+
+                /* Multiple read bit is reversed polarity */
+                reg_tctl = E1000_READ_REG(hw, TCTL);
+                reg_tarc1 = E1000_READ_REG(hw, TARC1);
+                if (reg_tctl & E1000_TCTL_MULR)
+                    reg_tarc1 &= ~(1 << 28);
+                else
+                    reg_tarc1 |= (1 << 28);
+
+                /* workaround TX hang with TSO=on */
+                reg_tarc1 |= ((1 << 30)|(1 << 26)|(1 << 24));
+
+                E1000_WRITE_REG(hw, TARC1, reg_tarc1);
+                break;
+            default:
+                break;
+        }
+
+        E1000_WRITE_REG(hw, TARC0, reg_tarc0);
+    }
+}
+
+/******************************************************************************
  * Performs basic configuration of the adapter.
  *
  * hw - Struct containing variables accessed by shared code
@@ -743,14 +861,13 @@ e1000_init_hw(struct e1000_hw *hw)
     DEBUGFUNC("e1000_init_hw");
 
     /* force full DMA clock frequency for 10/100 on ICH8 A0-B0 */
-    if (hw->mac_type == e1000_ich8lan) {
-        reg_data = E1000_READ_REG(hw, TARC0);
-        reg_data |= 0x30000000;
-        E1000_WRITE_REG(hw, TARC0, reg_data);
-
-        reg_data = E1000_READ_REG(hw, STATUS);
-        reg_data &= ~0x80000000;
-        E1000_WRITE_REG(hw, STATUS, reg_data);
+    if ((hw->mac_type == e1000_ich8lan) &&
+        ((hw->revision_id < 3) ||
+         ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) &&
+          (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))) {
+            reg_data = E1000_READ_REG(hw, STATUS);
+            reg_data &= ~0x80000000;
+            E1000_WRITE_REG(hw, STATUS, reg_data);
     }
 
     /* Initialize Identification LED */
@@ -763,6 +880,9 @@ e1000_init_hw(struct e1000_hw *hw)
     /* Set the media type and TBI compatibility */
     e1000_set_media_type(hw);
 
+    /* Must be called after e1000_set_media_type because media_type is used */
+    e1000_initialize_hardware_bits(hw);
+
     /* Disabling VLAN filtering. */
     DEBUGOUT("Initializing the IEEE VLAN\n");
     /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */
@@ -854,17 +974,6 @@ e1000_init_hw(struct e1000_hw *hw)
     if (hw->mac_type > e1000_82544) {
         ctrl = E1000_READ_REG(hw, TXDCTL);
         ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
-        switch (hw->mac_type) {
-        default:
-            break;
-        case e1000_82571:
-        case e1000_82572:
-        case e1000_82573:
-        case e1000_ich8lan:
-        case e1000_80003es2lan:
-            ctrl |= E1000_TXDCTL_COUNT_DESC;
-            break;
-        }
         E1000_WRITE_REG(hw, TXDCTL, ctrl);
     }
 
@@ -902,8 +1011,6 @@ e1000_init_hw(struct e1000_hw *hw)
     case e1000_ich8lan:
         ctrl = E1000_READ_REG(hw, TXDCTL1);
         ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
-        if (hw->mac_type >= e1000_82571)
-            ctrl |= E1000_TXDCTL_COUNT_DESC;
         E1000_WRITE_REG(hw, TXDCTL1, ctrl);
         break;
     }
@@ -1143,11 +1250,11 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
     if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572)
         E1000_WRITE_REG(hw, SCTL, E1000_DISABLE_SERDES_LOOPBACK);
 
-    /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be
+    /* On adapters with a MAC newer than 82544, SWDP 1 will be
      * set when the optics detect a signal. On older adapters, it will be
      * cleared when there is a signal.  This applies to fiber media only.
-     * If we're on serdes media, adjust the output amplitude to value set in
-     * the EEPROM.
+     * If we're on serdes media, adjust the output amplitude to value
+     * set in the EEPROM.
      */
     ctrl = E1000_READ_REG(hw, CTRL);
     if (hw->media_type == e1000_media_type_fiber)