[PATCH] A new 10GB Ethernet Driver by Chelsio Communications

A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio
(http://www.chelsio.com).  This driver supports the Chelsio N210 NIC and is
backward compatible with the Chelsio N110 model 10Gb NICs.  It supports
AMD64, EM64T and x86 systems.

Signed-off-by: Tina Yang <tinay@chelsio.com>
Signed-off-by: Scott Bardone <sbardone@chelsio.com>
Signed-off-by: Christoph Lameter <christoph@lameter.com>

Adrian said:

- my3126.c is unused (because t1_my3126_ops isn't used anywhere)
- what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for?
- $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded
- completely unused global functions:
  - espi.c: t1_espi_get_intr_counts
  - sge.c: t1_sge_get_intr_counts
- the following functions can be made static:
  - sge.c: t1_espi_workaround
  - sge.c: t1_sge_tx
  - subr.c: __t1_tpi_read
  - subr.c: __t1_tpi_write
  - subr.c: t1_wait_op_done

shemminger said:

The performance recommendations in cxgb.txt are common to all fast devices,
and should be in one file rather than just for this device. I would rather
see ip-sysctl.txt updated or a new file on tuning recommendations started.
Some of them have consequences that aren't documented well.
For example, turning off TCP timestamps risks data corruption from sequence wrap.

A new driver shouldn't need so may #ifdef's unless you want to putit on older
vendor versions of 2.4

Some accessor and wrapper functions like:
        t1_pci_read_config_4
        adapter_name
        t1_malloc
are just annoying noise.

Why have useless dead code like:

/* Interrupt handler */
+static int pm3393_interrupt_handler(struct cmac *cmac)
+{
+       u32 master_intr_status;
+/*
+    1. Read master interrupt register.
+    2. Read BLOCK's interrupt status registers.
+    3. Handle BLOCK interrupts.
+*/

Jeff said:

step 1:  kill all the OS wrappers.

 And do you really need hooks for multiple MACs, when only one MAC is
 really supported?  Typically these hooks are at a higher level anyway --
 struct net_device.

From: Christoph Lameter <christoph@lameter

Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian
Bunk.  Reduces the size of the driver to ~260k.

- clean up tabs
- removed my3126.c
- removed 85% of suni1x10gexp_regs.h
- removed 80% of regs.h
- removed various calls, renamed variables/functions.
- removed system specific and other wrappers (usleep, msleep)
- removed dead code
- dropped redundant casts in osdep.h
- dropped redundant check of kfree
- dropped weird code (MODVERSIONS stuff)
- reduced number of #ifdefs
- use kcalloc now instead of kmalloc
- Add information about known issues with the driver
- Add information about authors

Signed-off-by: Scott Bardone <sbardone@chelsio.com>
Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

diff -puN /dev/null Documentation/networking/cxgb.txt

1 files changed, 150 insertions, 0 deletions

diff --git a/drivers/net/chelsio/cphy.h b/drivers/net/chelsio/cphy.h
new file mode 100644
index 00000000000..1bc2248264c
--- /dev/null
+++ b/drivers/net/chelsio/cphy.h
@@ -0,0 +1,150 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: cphy.h                                                              *
+ * $Revision: 1.4 $                                                          *
+ * $Date: 2005/03/23 07:41:27 $                                              *
+ * Description:                                                              *
+ *  part of the Chelsio 10Gb Ethernet Driver.                                *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
+ *          Tina Yang               <tainay@chelsio.com>                     *
+ *          Felix Marti             <felix@chelsio.com>                      *
+ *          Scott Bardone           <sbardone@chelsio.com>                   *
+ *          Kurt Ottaway            <kottaway@chelsio.com>                   *
+ *          Frank DiMambro          <frank@chelsio.com>                      *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#ifndef CHELSIO_CPHY_H
+#define CHELSIO_CPHY_H
+
+#include "common.h"
+
+struct mdio_ops {
+	void (*init)(adapter_t *adapter, const struct board_info *bi);
+	int  (*read)(adapter_t *adapter, int phy_addr, int mmd_addr,
+		     int reg_addr, unsigned int *val);
+	int  (*write)(adapter_t *adapter, int phy_addr, int mmd_addr,
+		      int reg_addr, unsigned int val);
+};
+
+/* PHY interrupt types */
+enum {
+	cphy_cause_link_change = 0x1,
+	cphy_cause_error = 0x2
+};
+
+struct cphy;
+
+/* PHY operations */
+struct cphy_ops {
+	void (*destroy)(struct cphy *);
+	int (*reset)(struct cphy *, int wait);
+
+	int (*interrupt_enable)(struct cphy *);
+	int (*interrupt_disable)(struct cphy *);
+	int (*interrupt_clear)(struct cphy *);
+	int (*interrupt_handler)(struct cphy *);
+
+	int (*autoneg_enable)(struct cphy *);
+	int (*autoneg_disable)(struct cphy *);
+	int (*autoneg_restart)(struct cphy *);
+
+	int (*advertise)(struct cphy *phy, unsigned int advertise_map);
+	int (*set_loopback)(struct cphy *, int on);
+	int (*set_speed_duplex)(struct cphy *phy, int speed, int duplex);
+	int (*get_link_status)(struct cphy *phy, int *link_ok, int *speed,
+			       int *duplex, int *fc);
+};
+
+/* A PHY instance */
+struct cphy {
+	int addr;                            /* PHY address */
+	adapter_t *adapter;                  /* associated adapter */
+	struct cphy_ops *ops;                /* PHY operations */
+	int (*mdio_read)(adapter_t *adapter, int phy_addr, int mmd_addr,
+			 int reg_addr, unsigned int *val);
+	int (*mdio_write)(adapter_t *adapter, int phy_addr, int mmd_addr,
+			  int reg_addr, unsigned int val);
+	struct cphy_instance *instance;
+};
+
+/* Convenience MDIO read/write wrappers */
+static inline int mdio_read(struct cphy *cphy, int mmd, int reg,
+			    unsigned int *valp)
+{
+	return cphy->mdio_read(cphy->adapter, cphy->addr, mmd, reg, valp);
+}
+
+static inline int mdio_write(struct cphy *cphy, int mmd, int reg,
+			     unsigned int val)
+{
+	return cphy->mdio_write(cphy->adapter, cphy->addr, mmd, reg, val);
+}
+
+static inline int simple_mdio_read(struct cphy *cphy, int reg,
+				   unsigned int *valp)
+{
+	return mdio_read(cphy, 0, reg, valp);
+}
+
+static inline int simple_mdio_write(struct cphy *cphy, int reg,
+				    unsigned int val)
+{
+	return mdio_write(cphy, 0, reg, val);
+}
+
+/* Convenience initializer */
+static inline void cphy_init(struct cphy *phy, adapter_t *adapter,
+			     int phy_addr, struct cphy_ops *phy_ops,
+			     struct mdio_ops *mdio_ops)
+{
+	phy->adapter = adapter;
+	phy->addr    = phy_addr;
+	phy->ops     = phy_ops;
+	if (mdio_ops) {
+		phy->mdio_read  = mdio_ops->read;
+		phy->mdio_write = mdio_ops->write;
+	}
+}
+
+/* Operations of the PHY-instance factory */
+struct gphy {
+	/* Construct a PHY instance with the given PHY address */
+	struct cphy *(*create)(adapter_t *adapter, int phy_addr,
+			       struct mdio_ops *mdio_ops);
+
+	/*
+	 * Reset the PHY chip.  This resets the whole PHY chip, not individual
+	 * ports.
+	 */
+	int (*reset)(adapter_t *adapter);
+};
+
+extern struct gphy t1_my3126_ops;
+extern struct gphy t1_mv88e1xxx_ops;
+extern struct gphy t1_xpak_ops;
+extern struct gphy t1_mv88x201x_ops;
+extern struct gphy t1_dummy_phy_ops;
+#endif