Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	drivers/net/can/Kconfig

5 files changed, 70 insertions, 55 deletions

diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index c16e6ff139d..732b093e081 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -35,63 +35,9 @@ config CAN_CALC_BITTIMING
 	  arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
 	  If unsure, say Y.
 
-config CAN_SJA1000
-	depends on CAN_DEV && HAS_IOMEM
-	tristate "Philips SJA1000"
-	---help---
-	  Driver for the SJA1000 CAN controllers from Philips or NXP
-
-config CAN_SJA1000_ISA
-	depends on CAN_SJA1000 && ISA
-	tristate "ISA Bus based legacy SJA1000 driver"
-	---help---
-	  This driver adds legacy support for SJA1000 chips connected to
-	  the ISA bus using I/O port, memory mapped or indirect access.
-
-config CAN_SJA1000_PLATFORM
-	depends on CAN_SJA1000
-	tristate "Generic Platform Bus based SJA1000 driver"
-	---help---
-	  This driver adds support for the SJA1000 chips connected to
-	  the "platform bus" (Linux abstraction for directly to the
-	  processor attached devices).  Which can be found on various
-	  boards from Phytec (http://www.phytec.de) like the PCM027,
-	  PCM038.
-
-config CAN_SJA1000_OF_PLATFORM
-	depends on CAN_SJA1000 && PPC_OF
-	tristate "Generic OF Platform Bus based SJA1000 driver"
-	---help---
-	  This driver adds support for the SJA1000 chips connected to
-	  the OpenFirmware "platform bus" found on embedded systems with
-	  OpenFirmware bindings, e.g. if you have a PowerPC based system
-	  you may want to enable this option.
-
-config CAN_EMS_PCI
-	tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
-	depends on PCI && CAN_SJA1000
-	---help---
-	  This driver is for the one, two or four channel CPC-PCI,
-	  CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
-	  (http://www.ems-wuensche.de).
-
-config CAN_EMS_USB
-	tristate "EMS CPC-USB/ARM7 CAN/USB interface"
-	depends on USB && CAN_DEV
-	---help---
-	  This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
-	  from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
-
-config CAN_KVASER_PCI
-	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
-	depends on PCI && CAN_SJA1000
-	---help---
-	  This driver is for the the PCIcanx and PCIcan cards (1, 2 or
-	  4 channel) from Kvaser (http://www.kvaser.com).
-
 config CAN_AT91
 	tristate "Atmel AT91 onchip CAN controller"
-	depends on CAN && CAN_DEV && ARCH_AT91SAM9263
+	depends on CAN_DEV && ARCH_AT91SAM9263
 	---help---
 	  This is a driver for the SoC CAN controller in Atmel's AT91SAM9263.
 
@@ -127,6 +73,10 @@ config CAN_MPC52XX
 	  This driver can also be built as a module.  If so, the module
 	  will be called mpc5xxx_can.
 
+source "drivers/net/can/sja1000/Kconfig"
+
+source "drivers/net/can/usb/Kconfig"
+
 config CAN_DEBUG_DEVICES
 	bool "CAN devices debugging messages"
 	depends on CAN
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 26c89aaeba6..c1bb29f0322 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -677,6 +677,11 @@ nla_put_failure:
 	return -EMSGSIZE;
 }
 
+static size_t can_get_xstats_size(const struct net_device *dev)
+{
+	return sizeof(struct can_device_stats);
+}
+
 static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev)
 {
 	struct can_priv *priv = netdev_priv(dev);
@@ -705,6 +710,7 @@ static struct rtnl_link_ops can_link_ops __read_mostly = {
 	.changelink	= can_changelink,
 	.get_size	= can_get_size,
 	.fill_info	= can_fill_info,
+	.get_xstats_size = can_get_xstats_size,
 	.fill_xstats	= can_fill_xstats,
 };
 
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
new file mode 100644
index 00000000000..4c674927f24
--- /dev/null
+++ b/drivers/net/can/sja1000/Kconfig
@@ -0,0 +1,47 @@
+menuconfig CAN_SJA1000
+	tristate "Philips/NXP SJA1000 devices"
+	depends on CAN_DEV && HAS_IOMEM
+
+if CAN_SJA1000
+
+config CAN_SJA1000_ISA
+	tristate "ISA Bus based legacy SJA1000 driver"
+	depends on ISA
+	---help---
+	  This driver adds legacy support for SJA1000 chips connected to
+	  the ISA bus using I/O port, memory mapped or indirect access.
+
+config CAN_SJA1000_PLATFORM
+	tristate "Generic Platform Bus based SJA1000 driver"
+	---help---
+	  This driver adds support for the SJA1000 chips connected to
+	  the "platform bus" (Linux abstraction for directly to the
+	  processor attached devices).  Which can be found on various
+	  boards from Phytec (http://www.phytec.de) like the PCM027,
+	  PCM038.
+
+config CAN_SJA1000_OF_PLATFORM
+	tristate "Generic OF Platform Bus based SJA1000 driver"
+	depends on PPC_OF
+	---help---
+	  This driver adds support for the SJA1000 chips connected to
+	  the OpenFirmware "platform bus" found on embedded systems with
+	  OpenFirmware bindings, e.g. if you have a PowerPC based system
+	  you may want to enable this option.
+
+config CAN_EMS_PCI
+	tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
+	depends on PCI
+	---help---
+	  This driver is for the one, two or four channel CPC-PCI,
+	  CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
+	  (http://www.ems-wuensche.de).
+
+config CAN_KVASER_PCI
+	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
+	depends on PCI
+	---help---
+	  This driver is for the the PCIcanx and PCIcan cards (1, 2 or
+	  4 channel) from Kvaser (http://www.kvaser.com).
+
+endif
diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig
new file mode 100644
index 00000000000..bbc78e0b8a1
--- /dev/null
+++ b/drivers/net/can/usb/Kconfig
@@ -0,0 +1,10 @@
+menu "CAN USB interfaces"
+	depends on USB && CAN_DEV
+
+config CAN_EMS_USB
+	tristate "EMS CPC-USB/ARM7 CAN/USB interface"
+	---help---
+	  This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
+	  from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+
+endmenu
diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile
index c3f75ba701b..0afd51d4c7a 100644
--- a/drivers/net/can/usb/Makefile
+++ b/drivers/net/can/usb/Makefile
@@ -3,3 +3,5 @@
 #
 
 obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
+
+ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG