add bnx2x driver for BCM57710

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 4394 insertions, 0 deletions

diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
new file mode 100644
index 00000000000..86055297ab0
--- /dev/null
+++ b/drivers/net/bnx2x_reg.h
@@ -0,0 +1,4394 @@
+/* bnx2x_reg.h: Broadcom Everest network driver.
+ *
+ * Copyright (c) 2007 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * The registers description starts with the regsister Access type followed
+ * by size in bits. For example [RW 32]. The access types are:
+ * R  - Read only
+ * RC - Clear on read
+ * RW - Read/Write
+ * ST - Statistics register (clear on read)
+ * W  - Write only
+ * WB - Wide bus register - the size is over 32 bits and it should be
+ *      read/write in consecutive 32 bits accesses
+ * WR - Write Clear (write 1 to clear the bit)
+ *
+ */
+
+
+/* [R 19] Interrupt register #0 read */
+#define BRB1_REG_BRB1_INT_STS					 0x6011c
+/* [RW 4] Parity mask register #0 read/write */
+#define BRB1_REG_BRB1_PRTY_MASK 				 0x60138
+/* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
+   address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
+   BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. */
+#define BRB1_REG_FREE_LIST_PRS_CRDT				 0x60200
+/* [RW 23] LL RAM data. */
+#define BRB1_REG_LL_RAM 					 0x61000
+/* [R 24] The number of full blocks. */
+#define BRB1_REG_NUM_OF_FULL_BLOCKS				 0x60090
+/* [ST 32] The number of cycles that the write_full signal towards MAC #0
+   was asserted. */
+#define BRB1_REG_NUM_OF_FULL_CYCLES_0				 0x600c8
+#define BRB1_REG_NUM_OF_FULL_CYCLES_1				 0x600cc
+#define BRB1_REG_NUM_OF_FULL_CYCLES_2				 0x600d0
+#define BRB1_REG_NUM_OF_FULL_CYCLES_3				 0x600d4
+#define BRB1_REG_NUM_OF_FULL_CYCLES_4				 0x600d8
+/* [ST 32] The number of cycles that the pause signal towards MAC #0 was
+   asserted. */
+#define BRB1_REG_NUM_OF_PAUSE_CYCLES_0				 0x600b8
+#define BRB1_REG_NUM_OF_PAUSE_CYCLES_1				 0x600bc
+#define BRB1_REG_NUM_OF_PAUSE_CYCLES_2				 0x600c0
+#define BRB1_REG_NUM_OF_PAUSE_CYCLES_3				 0x600c4
+/* [RW 10] Write client 0: De-assert pause threshold. */
+#define BRB1_REG_PAUSE_HIGH_THRESHOLD_0 			 0x60078
+#define BRB1_REG_PAUSE_HIGH_THRESHOLD_1 			 0x6007c
+/* [RW 10] Write client 0: Assert pause threshold. */
+#define BRB1_REG_PAUSE_LOW_THRESHOLD_0				 0x60068
+#define BRB1_REG_PAUSE_LOW_THRESHOLD_1				 0x6006c
+/* [RW 1] Reset the design by software. */
+#define BRB1_REG_SOFT_RESET					 0x600dc
+/* [R 5] Used to read the value of the XX protection CAM occupancy counter. */
+#define CCM_REG_CAM_OCCUP					 0xd0188
+/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
+   acknowledge output is deasserted; all other signals are treated as usual;
+   if 1 - normal activity. */
+#define CCM_REG_CCM_CFC_IFEN					 0xd003c
+/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
+   disregarded; valid is deasserted; all other signals are treated as usual;
+   if 1 - normal activity. */
+#define CCM_REG_CCM_CQM_IFEN					 0xd000c
+/* [RW 1] If set the Q index; received from the QM is inserted to event ID.
+   Otherwise 0 is inserted. */
+#define CCM_REG_CCM_CQM_USE_Q					 0xd00c0
+/* [RW 11] Interrupt mask register #0 read/write */
+#define CCM_REG_CCM_INT_MASK					 0xd01e4
+/* [R 11] Interrupt register #0 read */
+#define CCM_REG_CCM_INT_STS					 0xd01d8
+/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
+   REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
+   Is used to determine the number of the AG context REG-pairs written back;
+   when the input message Reg1WbFlg isn't set. */
+#define CCM_REG_CCM_REG0_SZ					 0xd00c4
+/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
+   disregarded; valid is deasserted; all other signals are treated as usual;
+   if 1 - normal activity. */
+#define CCM_REG_CCM_STORM0_IFEN 				 0xd0004
+/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
+   disregarded; valid is deasserted; all other signals are treated as usual;
+   if 1 - normal activity. */
+#define CCM_REG_CCM_STORM1_IFEN 				 0xd0008
+/* [RW 1] CDU AG read Interface enable. If 0 - the request input is
+   disregarded; valid output is deasserted; all other signals are treated as
+   usual; if 1 - normal activity. */
+#define CCM_REG_CDU_AG_RD_IFEN					 0xd0030
+/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
+   are disregarded; all other signals are treated as usual; if 1 - normal
+   activity. */
+#define CCM_REG_CDU_AG_WR_IFEN					 0xd002c
+/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
+   disregarded; valid output is deasserted; all other signals are treated as
+   usual; if 1 - normal activity. */
+#define CCM_REG_CDU_SM_RD_IFEN					 0xd0038
+/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
+   input is disregarded; all other signals are treated as usual; if 1 -
+   normal activity. */
+#define CCM_REG_CDU_SM_WR_IFEN					 0xd0034
+/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
+   the initial credit value; read returns the current value of the credit
+   counter. Must be initialized to 1 at start-up. */
+#define CCM_REG_CFC_INIT_CRD					 0xd0204
+/* [RW 2] Auxillary counter flag Q number 1. */
+#define CCM_REG_CNT_AUX1_Q					 0xd00c8
+/* [RW 2] Auxillary counter flag Q number 2. */
+#define CCM_REG_CNT_AUX2_Q					 0xd00cc
+/* [RW 28] The CM header value for QM request (primary). */
+#define CCM_REG_CQM_CCM_HDR_P					 0xd008c
+/* [RW 28] The CM header value for QM request (secondary). */
+#define CCM_REG_CQM_CCM_HDR_S					 0xd0090
+/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
+   acknowledge output is deasserted; all other signals are treated as usual;
+   if 1 - normal activity. */
+#define CCM_REG_CQM_CCM_IFEN					 0xd0014
+/* [RW 6] QM output initial credit. Max credit available - 32. Write writes
+   the initial credit value; read returns the current value of the credit
+   counter. Must be initialized to 32 at start-up. */
+#define CCM_REG_CQM_INIT_CRD					 0xd020c
+/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
+   stands for weight 8 (the most prioritised); 1 stands for weight 1(least
+   prioritised); 2 stands for weight 2; tc. */
+#define CCM_REG_CQM_P_WEIGHT					 0xd00b8
+/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
+   acknowledge output is deasserted; all other signals are treated as usual;
+   if 1 - normal activity. */
+#define CCM_REG_CSDM_IFEN					 0xd0018
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+   at the SDM interface is detected. */
+#define CCM_REG_CSDM_LENGTH_MIS 				 0xd0170
+/* [RW 28] The CM header for QM formatting in case of an error in the QM
+   inputs. */
+#define CCM_REG_ERR_CCM_HDR					 0xd0094
+/* [RW 8] The Event ID in case the input message ErrorFlg is set. */
+#define CCM_REG_ERR_EVNT_ID					 0xd0098
+/* [RW 8] FIC0 output initial credit. Max credit available - 255. Write
+   writes the initial credit value; read returns the current value of the
+   credit counter. Must be initialized to 64 at start-up. */
+#define CCM_REG_FIC0_INIT_CRD					 0xd0210
+/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
+   writes the initial credit value; read returns the current value of the
+   credit counter. Must be initialized to 64 at start-up. */
+#define CCM_REG_FIC1_INIT_CRD					 0xd0214
+/* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
+   - strict priority defined by ~ccm_registers_gr_ag_pr.gr_ag_pr;
+   ~ccm_registers_gr_ld0_pr.gr_ld0_pr and
+   ~ccm_registers_gr_ld1_pr.gr_ld1_pr. Groups are according to channels and
+   outputs to STORM: aggregation; load FIC0; load FIC1 and store. */
+#define CCM_REG_GR_ARB_TYPE					 0xd015c
+/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
+   highest priority is 3. It is supposed; that the Store channel priority is
+   the compliment to 4 of the rest priorities - Aggregation channel; Load
+   (FIC0) channel and Load (FIC1). */
+#define CCM_REG_GR_LD0_PR					 0xd0164
+/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
+   highest priority is 3. It is supposed; that the Store channel priority is
+   the compliment to 4 of the rest priorities - Aggregation channel; Load
+   (FIC0) channel and Load (FIC1). */
+#define CCM_REG_GR_LD1_PR					 0xd0168
+/* [RW 2] General flags index. */
+#define CCM_REG_INV_DONE_Q					 0xd0108
+/* [RW 4] The number of double REG-pairs(128 bits); loaded from the STORM
+   context and sent to STORM; for a specific connection type. The double
+   REG-pairs are used in order to align to STORM context row size of 128
+   bits. The offset of these data in the STORM context is always 0. Index
+   _(0..15) stands for the connection type (one of 16). */
+#define CCM_REG_N_SM_CTX_LD_0					 0xd004c
+#define CCM_REG_N_SM_CTX_LD_1					 0xd0050
+#define CCM_REG_N_SM_CTX_LD_10					 0xd0074
+#define CCM_REG_N_SM_CTX_LD_11					 0xd0078
+#define CCM_REG_N_SM_CTX_LD_12					 0xd007c
+#define CCM_REG_N_SM_CTX_LD_13					 0xd0080
+#define CCM_REG_N_SM_CTX_LD_14					 0xd0084
+#define CCM_REG_N_SM_CTX_LD_15					 0xd0088
+#define CCM_REG_N_SM_CTX_LD_2					 0xd0054
+#define CCM_REG_N_SM_CTX_LD_3					 0xd0058
+#define CCM_REG_N_SM_CTX_LD_4					 0xd005c
+/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
+   acknowledge output is deasserted; all other signals are treated as usual;
+   if 1 - normal activity. */
+#define CCM_REG_PBF_IFEN					 0xd0028
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+   at the pbf interface is detected. */
+#define CCM_REG_PBF_LENGTH_MIS					 0xd0180
+/* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
+   weight 8 (the most prioritised); 1 stands for weight 1(least
+   prioritised); 2 stands for weight 2; tc. */
+#define CCM_REG_PBF_WEIGHT					 0xd00ac
+/* [RW 6] The physical queue number of queue number 1 per port index. */
+#define CCM_REG_PHYS_QNUM1_0					 0xd0134
+#define CCM_REG_PHYS_QNUM1_1					 0xd0138
+/* [RW 6] The physical queue number of queue number 2 per port index. */
+#define CCM_REG_PHYS_QNUM2_0					 0xd013c
+#define CCM_REG_PHYS_QNUM2_1					 0xd0140
+/* [RW 6] The physical queue number of queue number 3 per port index. */
+#define CCM_REG_PHYS_QNUM3_0					 0xd0144
+/* [RW 6] The physical queue number of queue number 0 with QOS equal 0 port
+   index 0. */
+#define CCM_REG_QOS_PHYS_QNUM0_0				 0xd0114
+#define CCM_REG_QOS_PHYS_QNUM0_1				 0xd0118
+/* [RW 6] The physical queue number of queue number 0 with QOS equal 1 port
+   index 0. */
+#define CCM_REG_QOS_PHYS_QNUM1_0				 0xd011c
+#define CCM_REG_QOS_PHYS_QNUM1_1				 0xd0120
+/* [RW 6] The physical queue number of queue number 0 with QOS equal 2 port
+   index 0. */
+#define CCM_REG_QOS_PHYS_QNUM2_0				 0xd0124
+/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
+   disregarded; acknowledge output is deasserted; all other signals are
+   treated as usual; if 1 - normal activity. */
+#define CCM_REG_STORM_CCM_IFEN					 0xd0010
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+   at the STORM interface is detected. */
+#define CCM_REG_STORM_LENGTH_MIS				 0xd016c
+/* [RW 1] Input tsem Interface enable. If 0 - the valid input is
+   disregarded; acknowledge output is deasserted; all other signals are
+   treated as usual; if 1 - normal activity. */
+#define CCM_REG_TSEM_IFEN					 0xd001c
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+   at the tsem interface is detected. */
+#define CCM_REG_TSEM_LENGTH_MIS 				 0xd0174
+/* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
+   weight 8 (the most prioritised); 1 stands for weight 1(least
+   prioritised); 2 stands for weight 2; tc. */
+#define CCM_REG_TSEM_WEIGHT					 0xd00a0
+/* [RW 1] Input usem Interface enable. If 0 - the valid input is
+   disregarded; acknowledge output is deasserted; all other signals are
+   treated as usual; if 1 - normal activity. */
+#define CCM_REG_USEM_IFEN					 0xd0024
+/* [RC 1] Set when message length mismatch (relative to last indication) at
+   the usem interface is detected. */
+#define CCM_REG_USEM_LENGTH_MIS 				 0xd017c
+/* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
+   weight 8 (the most prioritised); 1 stands for weight 1(least
+   prioritised); 2 stands for weight 2; tc. */
+#define CCM_REG_USEM_WEIGHT					 0xd00a8
+/* [RW 1] Input xsem Interface enable. If 0 - the valid input is
+   disregarded; acknowledge output is deasserted; all other signals are
+   treated as usual; if 1 - normal activity. */
+#define CCM_REG_XSEM_IFEN					 0xd0020
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+   at the xsem interface is detected. */
+#define CCM_REG_XSEM_LENGTH_MIS 				 0xd0178
+/* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for
+   weight 8 (the most prioritised); 1 stands for weight 1(least
+   prioritised); 2 stands for weight 2; tc. */
+#define CCM_REG_XSEM_WEIGHT					 0xd00a4
+/* [RW 19] Indirect access to the descriptor table of the XX protection
+   mechanism. The fields are: [5:0] - message length; [12:6] - message
+   pointer; 18:13] - next pointer. */
+#define CCM_REG_XX_DESCR_TABLE					 0xd0300
+/* [R 7] Used to read the value of XX protection Free counter. */
+#define CCM_REG_XX_FREE 					 0xd0184
+/* [RW 6] Initial value for the credit counter; responsible for fulfilling
+   of the Input Stage XX protection buffer by the XX protection pending
+   messages. Max credit available - 127. Write writes the initial credit
+   value; read returns the current value of the credit counter. Must be
+   initialized to maximum XX protected message size - 2 at start-up. */
+#define CCM_REG_XX_INIT_CRD					 0xd0220
+/* [RW 7] The maximum number of pending messages; which may be stored in XX
+   protection. At read the ~ccm_registers_xx_free.xx_free counter is read.
+   At write comprises the start value of the ~ccm_registers_xx_free.xx_free
+   counter. */
+#define CCM_REG_XX_MSG_NUM					 0xd0224
+/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
+#define CCM_REG_XX_OVFL_EVNT_ID 				 0xd0044
+/* [RW 18] Indirect access to the XX table of the XX protection mechanism.
+   The fields are: [5:0] - tail pointer; 11:6] - Link List size; 17:12] -
+   header pointer. */
+#define CCM_REG_XX_TABLE					 0xd0280
+#define CDU_REG_CDU_CHK_MASK0					 0x101000
+#define CDU_REG_CDU_CHK_MASK1					 0x101004
+#define CDU_REG_CDU_CONTROL0					 0x101008
+#define CDU_REG_CDU_DEBUG					 0x101010
+#define CDU_REG_CDU_GLOBAL_PARAMS				 0x101020
+/* [RW 7] Interrupt mask register #0 read/write */
+#define CDU_REG_CDU_INT_MASK					 0x10103c
+/* [R 7] Interrupt register #0 read */
+#define CDU_REG_CDU_INT_STS					 0x101030
+/* [RW 5] Parity mask register #0 read/write */
+#define CDU_REG_CDU_PRTY_MASK					 0x10104c
+/* [RC 32] logging of error data in case of a CDU load error:
+   {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
+   ype_error; ctual_active; ctual_compressed_context}; */
+#define CDU_REG_ERROR_DATA					 0x101014
+/* [WB 216] L1TT ram access. each entry has the following format :
+   {mrege_regions[7:0]; ffset12[5:0]...offset0[5:0];
+   ength12[5:0]...length0[5:0]; d12[3:0]...id0[3:0]} */
+#define CDU_REG_L1TT						 0x101800
+/* [WB 24] MATT ram access. each entry has the following
+   format:{RegionLength[11:0]; egionOffset[11:0]} */
+#define CDU_REG_MATT						 0x101100
+/* [R 1] indication the initializing the activity counter by the hardware
+   was done. */
+#define CFC_REG_AC_INIT_DONE					 0x104078
+/* [RW 13] activity counter ram access */
+#define CFC_REG_ACTIVITY_COUNTER				 0x104400
+#define CFC_REG_ACTIVITY_COUNTER_SIZE				 256
+/* [R 1] indication the initializing the cams by the hardware was done. */
+#define CFC_REG_CAM_INIT_DONE					 0x10407c
+/* [RW 2] Interrupt mask register #0 read/write */
+#define CFC_REG_CFC_INT_MASK					 0x104108
+/* [R 2] Interrupt register #0 read */
+#define CFC_REG_CFC_INT_STS					 0x1040fc
+/* [RC 2] Interrupt register #0 read clear */
+#define CFC_REG_CFC_INT_STS_CLR 				 0x104100
+/* [RW 4] Parity mask register #0 read/write */
+#define CFC_REG_CFC_PRTY_MASK					 0x104118
+/* [RW 21] CID cam access (21:1 - Data; alid - 0) */
+#define CFC_REG_CID_CAM 					 0x104800
+#define CFC_REG_CONTROL0					 0x104028
+#define CFC_REG_DEBUG0						 0x104050
+/* [RW 14] indicates per error (in #cfc_registers_cfc_error_vector.cfc_error
+   vector) whether the cfc should be disabled upon it */
+#define CFC_REG_DISABLE_ON_ERROR				 0x104044
+/* [RC 14] CFC error vector. when the CFC detects an internal error it will
+   set one of these bits. the bit description can be found in CFC
+   specifications */
+#define CFC_REG_ERROR_VECTOR					 0x10403c
+#define CFC_REG_INIT_REG					 0x10404c
+/* [RW 24] {weight_load_client7[2:0] to weight_load_client0[2:0]}. this
+   field allows changing the priorities of the weighted-round-robin arbiter
+   which selects which CFC load client should be served next */
+#define CFC_REG_LCREQ_WEIGHTS					 0x104084
+/* [R 1] indication the initializing the link list by the hardware was done. */
+#define CFC_REG_LL_INIT_DONE					 0x104074
+/* [R 9] Number of allocated LCIDs which are at empty state */
+#define CFC_REG_NUM_LCIDS_ALLOC 				 0x104020
+/* [R 9] Number of Arriving LCIDs in Link List Block */
+#define CFC_REG_NUM_LCIDS_ARRIVING				 0x104004
+/* [R 9] Number of Inside LCIDs in Link List Block */
+#define CFC_REG_NUM_LCIDS_INSIDE				 0x104008
+/* [R 9] Number of Leaving LCIDs in Link List Block */
+#define CFC_REG_NUM_LCIDS_LEAVING				 0x104018
+/* [RW 8] The event id for aggregated interrupt 0 */
+#define CSDM_REG_AGG_INT_EVENT_0				 0xc2038
+/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
+#define CSDM_REG_CFC_RSP_START_ADDR				 0xc2008
+/* [RW 16] The maximum value of the competion counter #0 */
+#define CSDM_REG_CMP_COUNTER_MAX0				 0xc201c
+/* [RW 16] The maximum value of the competion counter #1 */
+#define CSDM_REG_CMP_COUNTER_MAX1				 0xc2020
+/* [RW 16] The maximum value of the competion counter #2 */
+#define CSDM_REG_CMP_COUNTER_MAX2				 0xc2024
+/* [RW 16] The maximum value of the competion counter #3 */
+#define CSDM_REG_CMP_COUNTER_MAX3				 0xc2028
+/* [RW 13] The start address in the internal RAM for the completion
+   counters. */
+#define CSDM_REG_CMP_COUNTER_START_ADDR 			 0xc200c
+/* [RW 32] Interrupt mask register #0 read/write */
+#define CSDM_REG_CSDM_INT_MASK_0				 0xc229c
+#define CSDM_REG_CSDM_INT_MASK_1				 0xc22ac
+/* [RW 11] Parity mask register #0 read/write */
+#define CSDM_REG_CSDM_PRTY_MASK 				 0xc22bc
+#define CSDM_REG_ENABLE_IN1					 0xc2238
+#define CSDM_REG_ENABLE_IN2					 0xc223c
+#define CSDM_REG_ENABLE_OUT1					 0xc2240
+#define CSDM_REG_ENABLE_OUT2					 0xc2244
+/* [RW 4] The initial number of messages that can be sent to the pxp control
+   interface without receiving any ACK. */
+#define CSDM_REG_INIT_CREDIT_PXP_CTRL				 0xc24bc
+/* [ST 32] The number of ACK after placement messages received */
+#define CSDM_REG_NUM_OF_ACK_AFTER_PLACE 			 0xc227c
+/* [ST 32] The number of packet end messages received from the parser */
+#define CSDM_REG_NUM_OF_PKT_END_MSG				 0xc2274
+/* [ST 32] The number of requests received from the pxp async if */
+#define CSDM_REG_NUM_OF_PXP_ASYNC_REQ				 0xc2278
+/* [ST 32] The number of commands received in queue 0 */
+#define CSDM_REG_NUM_OF_Q0_CMD					 0xc2248
+/* [ST 32] The number of commands received in queue 10 */
+#define CSDM_REG_NUM_OF_Q10_CMD 				 0xc226c
+/* [ST 32] The number of commands received in queue 11 */
+#define CSDM_REG_NUM_OF_Q11_CMD 				 0xc2270
+/* [ST 32] The number of commands received in queue 1 */
+#define CSDM_REG_NUM_OF_Q1_CMD					 0xc224c
+/* [ST 32] The number of commands received in queue 3 */
+#define CSDM_REG_NUM_OF_Q3_CMD					 0xc2250
+/* [ST 32] The number of commands received in queue 4 */
+#define CSDM_REG_NUM_OF_Q4_CMD					 0xc2254
+/* [ST 32] The number of commands received in queue 5 */
+#define CSDM_REG_NUM_OF_Q5_CMD					 0xc2258
+/* [ST 32] The number of commands received in queue 6 */
+#define CSDM_REG_NUM_OF_Q6_CMD					 0xc225c
+/* [ST 32] The number of commands received in queue 7 */
+#define CSDM_REG_NUM_OF_Q7_CMD					 0xc2260
+/* [ST 32] The number of commands received in queue 8 */
+#define CSDM_REG_NUM_OF_Q8_CMD					 0xc2264
+/* [ST 32] The number of commands received in queue 9 */
+#define CSDM_REG_NUM_OF_Q9_CMD					 0xc2268
+/* [RW 13] The start address in the internal RAM for queue counters */
+#define CSDM_REG_Q_COUNTER_START_ADDR				 0xc2010
+/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
+#define CSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY			 0xc2548
+/* [R 1] parser fifo empty in sdm_sync block */
+#define CSDM_REG_SYNC_PARSER_EMPTY				 0xc2550
+/* [R 1] parser serial fifo empty in sdm_sync block */
+#define CSDM_REG_SYNC_SYNC_EMPTY				 0xc2558
+/* [RW 32] Tick for timer counter. Applicable only when
+   ~csdm_registers_timer_tick_enable.timer_tick_enable =1 */
+#define CSDM_REG_TIMER_TICK					 0xc2000
+/* [RW 5] The number of time_slots in the arbitration cycle */
+#define CSEM_REG_ARB_CYCLE_SIZE 				 0x200034
+/* [RW 3] The source that is associated with arbitration element 0. Source
+   decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+   sleeping thread with priority 1; 4- sleeping thread with priority 2 */
+#define CSEM_REG_ARB_ELEMENT0					 0x200020
+/* [RW 3] The source that is associated with arbitration element 1. Source
+   decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+   sleeping thread with priority 1; 4- sleeping thread with priority 2.
+   Could not be equal to register ~csem_registers_arb_element0.arb_element0 */
+#define CSEM_REG_ARB_ELEMENT1					 0x200024
+/* [RW 3] The source that is associated with arbitration element 2. Source
+   decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+   sleeping thread with priority 1; 4- sleeping thread with priority 2.
+   Could not be equal to register ~csem_registers_arb_element0.arb_element0
+   and ~csem_registers_arb_element1.arb_element1 */
+#define CSEM_REG_ARB_ELEMENT2					 0x200028
+/* [RW 3] The source that is associated with arbitration element 3. Source
+   decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+   sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
+   not be equal to register ~csem_registers_arb_element0.arb_element0 and
+   ~csem_registers_arb_element1.arb_element1 and
+   ~csem_registers_arb_element2.arb_element2 */
+#define CSEM_REG_ARB_ELEMENT3					 0x20002c
+/* [RW 3] The source that is associated with arbitration element 4. Source
+   decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+   sleeping thread with priority 1; 4- sleeping thread with priority 2.
+   Could not be equal to register ~csem_registers_arb_element0.arb_element0
+   and ~csem_registers_arb_element1.arb_element1 and
+   ~csem_registers_arb_element2.arb_element2 and
+   ~csem_registers_arb_element3.arb_element3 */
+#define CSEM_REG_ARB_ELEMENT4					 0x200030
+/* [RW 32] Interrupt mask register #0 read/write */
+#define CSEM_REG_CSEM_INT_MASK_0				 0x200110
+#define CSEM_REG_CSEM_INT_MASK_1				 0x200120
+/* [RW 32] Parity mask register #0 read/write */
+#define CSEM_REG_CSEM_PRTY_MASK_0				 0x200130
+#define CSEM_REG_CSEM_PRTY_MASK_1				 0x200140
+#define CSEM_REG_ENABLE_IN					 0x2000a4
+#define CSEM_REG_ENABLE_OUT					 0x2000a8
+/* [RW 32] This address space contains all registers and memories that are
+   placed in SEM_FAST block. The SEM_FAST registers are described in
+   appendix B. In order to access the SEM_FAST registers the base address
+   CSEM_REGISTERS_FAST_MEMORY (Offset: 0x220000) should be added to each
+   SEM_FAST register offset. */
+#define CSEM_REG_FAST_MEMORY					 0x220000
+/* [RW 1] Disables input messages from FIC0 May be updated during run_time
+   by the microcode */
+#define CSEM_REG_FIC0_DISABLE					 0x200224
+/* [RW 1] Disables input messages from FIC1 May be updated during run_time
+   by the microcode */
+#define CSEM_REG_FIC1_DISABLE					 0x200234
+/* [RW 15] Interrupt table Read and write access to it is not possible in
+   the middle of the work */
+#define CSEM_REG_INT_TABLE					 0x200400
+/* [ST 24] Statistics register. The number of messages that entered through
+   FIC0 */
+#define CSEM_REG_MSG_NUM_FIC0					 0x200000
+/* [ST 24] Statistics register. The number of messages that entered through
+   FIC1 */
+#define CSEM_REG_MSG_NUM_FIC1					 0x200004
+/* [ST 24] Statistics register. The number of messages that were sent to
+   FOC0 */
+#define CSEM_REG_MSG_NUM_FOC0					 0x200008
+/* [ST 24] Statistics register. The number of messages that were sent to
+   FOC1 */
+#define CSEM_REG_MSG_NUM_FOC1					 0x20000c
+/* [ST 24] Statistics register. The number of messages that were sent to
+   FOC2 */
+#define CSEM_REG_MSG_NUM_FOC2					 0x200010
+/* [ST 24] Statistics register. The number of messages that were sent to
+   FOC3 */
+#define CSEM_REG_MSG_NUM_FOC3					 0x200014
+/* [RW 1] Disables input messages from the passive buffer May be updated
+   during run_time by the microcode */
+#define CSEM_REG_PAS_DISABLE					 0x20024c
+/* [WB 128] Debug only. Passive buffer memory */
+#define CSEM_REG_PASSIVE_BUFFER 				 0x202000
+/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
+#define CSEM_REG_PRAM						 0x240000
+/* [R 16] Valid sleeping threads indication have bit per thread */
+#define CSEM_REG_SLEEP_THREADS_VALID				 0x20026c
+/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
+#define CSEM_REG_SLOW_EXT_STORE_EMPTY				 0x2002a0
+/* [RW 16] List of free threads . There is a bit per thread. */
+#define CSEM_REG_THREADS_LIST					 0x2002e4
+/* [RW 3] The arbitration scheme of time_slot 0 */
+#define CSEM_REG_TS_0_AS					 0x200038
+/* [RW 3] The arbitration scheme of time_slot 10 */
+#define CSEM_REG_TS_10_AS					 0x200060
+/* [RW 3] The arbitration scheme of time_slot 11 */
+#define CSEM_REG_TS_11_AS					 0x200064
+/* [RW 3] The arbitration scheme of time_slot 12 */
+#define CSEM_REG_TS_12_AS					 0x200068
+/* [RW 3] The arbitration scheme of time_slot 13 */
+#define CSEM_REG_TS_13_AS					 0x20006c
+/* [RW 3] The arbitration scheme of time_slot 14 */
+#define CSEM_REG_TS_14_AS					 0x200070
+/* [RW 3] The arbitration scheme of time_slot 15 */
+#define CSEM_REG_TS_15_AS					 0x200074
+/* [RW 3] The arbitration scheme of time_slot 16 */
+#define CSEM_REG_TS_16_AS					 0x200078
+/* [RW 3] The arbitration scheme of time_slot 17 */
+#define CSEM_REG_TS_17_AS					 0x20007c
+/* [RW 3] The arbitration scheme of time_slot 18 */
+#define CSEM_REG_TS_18_AS					 0x200080
+/* [RW 3] The arbitration scheme of time_slot 1 */
+#define CSEM_REG_TS_1_AS					 0x20003c
+/* [RW 3] The arbitration scheme of time_slot 2 */
+#define CSEM_REG_TS_2_AS					 0x200040
+/* [RW 3] The arbitration scheme of time_slot 3 */
+#define CSEM_REG_TS_3_AS					 0x200044
+/* [RW 3] The arbitration scheme of time_slot 4 */
+#define CSEM_REG_TS_4_AS					 0x200048
+/* [RW 3] The arbitration scheme of time_slot 5 */
+#define CSEM_REG_TS_5_AS					 0x20004c
+/* [RW 3] The arbitration scheme of time_slot 6 */
+#define CSEM_REG_TS_6_AS					 0x200050
+/* [RW 3] The arbitration scheme of time_slot 7 */
+#define CSEM_REG_TS_7_AS					 0x200054
+/* [RW 3] The arbitration scheme of time_slot 8 */
+#define CSEM_REG_TS_8_AS					 0x200058
+/* [RW 3] The arbitration scheme of time_slot 9 */
+#define CSEM_REG_TS_9_AS					 0x20005c
+/* [RW 1] Parity mask register #0 read/write */
+#define DBG_REG_DBG_PRTY_MASK					 0xc0a8
+/* [RW 2] debug only: These bits indicate the credit for PCI request type 4
+   interface; MUST be configured AFTER pci_ext_buffer_strt_addr_lsb/msb are
+   configured */
+#define DBG_REG_PCI_REQ_CREDIT					 0xc120
+/* [RW 32] Commands memory. The address to command X; row Y is to calculated
+   as 14*X+Y. */
+#define DMAE_REG_CMD_MEM					 0x102400
+/* [RW 1] If 0 - the CRC-16c initial value is all zeroes; if 1 - the CRC-16c
+   initial value is all ones. */
+#define DMAE_REG_CRC16C_INIT					 0x10201c
+/* [RW 1] If 0 - the CRC-16 T10 initial value is all zeroes; if 1 - the
+   CRC-16 T10 initial value is all ones. */
+#define DMAE_REG_CRC16T10_INIT					 0x102020
+/* [RW 2] Interrupt mask register #0 read/write */
+#define DMAE_REG_DMAE_INT_MASK					 0x102054
+/* [RW 4] Parity mask register #0 read/write */
+#define DMAE_REG_DMAE_PRTY_MASK 				 0x102064
+/* [RW 1] Command 0 go. */
+#define DMAE_REG_GO_C0						 0x102080
+/* [RW 1] Command 1 go. */
+#define DMAE_REG_GO_C1						 0x102084
+/* [RW 1] Command 10 go. */
+#define DMAE_REG_GO_C10 					 0x102088
+#define DMAE_REG_GO_C10_SIZE					 1
+/* [RW 1] Command 11 go. */
+#define DMAE_REG_GO_C11 					 0x10208c
+#define DMAE_REG_GO_C11_SIZE					 1
+/* [RW 1] Command 12 go. */
+#define DMAE_REG_GO_C12 					 0x102090
+#define DMAE_REG_GO_C12_SIZE					 1
+/* [RW 1] Command 13 go. */
+#define DMAE_REG_GO_C13 					 0x102094
+#define DMAE_REG_GO_C13_SIZE					 1
+/* [RW 1] Command 14 go. */
+#define DMAE_REG_GO_C14 					 0x102098
+#define DMAE_REG_GO_C14_SIZE					 1
+/* [RW 1] Command 15 go. */
+#define DMAE_REG_GO_C15 					 0x10209c
+#define DMAE_REG_GO_C15_SIZE					 1
+/* [RW 1] Command 10 go. */
+#define DMAE_REG_GO_C10 					 0x102088
+/* [RW 1] Command 11 go. */
+#define DMAE_REG_GO_C11 					 0x10208c
+/* [RW 1] Command 12 go. */
+#define DMAE_REG_GO_C12 					 0x102090
+/* [RW 1] Command 13 go. */
+#define DMAE_REG_GO_C13 					 0x102094
+/* [RW 1] Command 14 go. */
+#define DMAE_REG_GO_C14 					 0x102098
+/* [RW 1] Command 15 go. */
+#define DMAE_REG_GO_C15 					 0x10209c
+/* [RW 1] Command 2 go. */
+#define DMAE_REG_GO_C2						 0x1020a0
+/* [RW 1] Command 3 go. */
+#define DMAE_REG_GO_C3						 0x1020a4
+/* [RW 1] Command 4 go. */
+#define DMAE_REG_GO_C4						 0x1020a8
+/* [RW 1] Command 5 go. */
+#define DMAE_REG_GO_C5						 0x1020ac
+/* [RW 1] Command 6 go. */
+#define DMAE_REG_GO_C6						 0x1020b0
+/* [RW 1] Command 7 go. */
+#define DMAE_REG_GO_C7						 0x1020b4
+/* [RW 1] Command 8 go. */
+#define DMAE_REG_GO_C8						 0x1020b8
+/* [RW 1] Command 9 go. */
+#define DMAE_REG_GO_C9						 0x1020bc
+/* [RW 1] DMAE GRC Interface (Target; aster) enable. If 0 - the acknowledge
+   input is disregarded; valid is deasserted; all other signals are treated
+   as usual; if 1 - normal activity. */
+#define DMAE_REG_GRC_IFEN					 0x102008
+/* [RW 1] DMAE PCI Interface (Request; ead; rite) enable. If 0 - the
+   acknowledge input is disregarded; valid is deasserted; full is asserted;
+   all other signals are treated as usual; if 1 - normal activity. */
+#define DMAE_REG_PCI_IFEN					 0x102004
+/* [RW 4] DMAE- PCI Request Interface initial credit. Write writes the
+   initial value to the credit counter; related to the address. Read returns
+   the current value of the counter. */
+#define DMAE_REG_PXP_REQ_INIT_CRD				 0x1020c0
+/* [RW 8] Aggregation command. */
+#define DORQ_REG_AGG_CMD0					 0x170060
+/* [RW 8] Aggregation command. */
+#define DORQ_REG_AGG_CMD1					 0x170064
+/* [RW 8] Aggregation command. */
+#define DORQ_REG_AGG_CMD2					 0x170068
+/* [RW 8] Aggregation command. */
+#define DORQ_REG_AGG_CMD3					 0x17006c
+/* [RW 28] UCM Header. */
+#define DORQ_REG_CMHEAD_RX					 0x170050
+/* [RW 5] Interrupt mask register #0 read/write */
+#define DORQ_REG_DORQ_INT_MASK					 0x170180
+/* [R 5] Interrupt register #0 read */
+#define DORQ_REG_DORQ_INT_STS					 0x170174
+/* [RC 5] Interrupt register #0 read clear */
+#define DORQ_REG_DORQ_INT_STS_CLR				 0x170178
+/* [RW 2] Parity mask register #0 read/write */
+#define DORQ_REG_DORQ_PRTY_MASK 				 0x170190
+/* [RW 8] The address to write the DPM CID to STORM. */
+#define DORQ_REG_DPM_CID_ADDR					 0x170044
+/* [RW 5] The DPM mode CID extraction offset. */
+#define DORQ_REG_DPM_CID_OFST					 0x170030
+/* [RW 12] The threshold of the DQ FIFO to send the almost full interrupt. */
+#define DORQ_REG_DQ_FIFO_AFULL_TH				 0x17007c
+/* [RW 12] The threshold of the DQ FIFO to send the full interrupt. */
+#define DORQ_REG_DQ_FIFO_FULL_TH				 0x170078
+/* [R 13] Current value of the DQ FIFO fill level according to following
+   pointer. The range is 0 - 256 FIFO rows; where each row stands for the
+   doorbell. */
+#define DORQ_REG_DQ_FILL_LVLF					 0x1700a4
+/* [R 1] DQ FIFO full status. Is set; when FIFO filling level is more or
+   equal to full threshold; reset on full clear. */
+#define DORQ_REG_DQ_FULL_ST					 0x1700c0
+/* [RW 28] The value sent to CM header in the case of CFC load error. */
+#define DORQ_REG_ERR_CMHEAD					 0x170058
+#define DORQ_REG_IF_EN						 0x170004
+#define DORQ_REG_MODE_ACT					 0x170008
+/* [RW 5] The normal mode CID extraction offset. */
+#define DORQ_REG_NORM_CID_OFST					 0x17002c
+/* [RW 28] TCM Header when only TCP context is loaded. */
+#define DORQ_REG_NORM_CMHEAD_TX 				 0x17004c
+/* [RW 3] The number of simultaneous outstanding requests to Context Fetch
+   Interface. */
+#define DORQ_REG_OUTST_REQ					 0x17003c
+#define DORQ_REG_REGN						 0x170038
+/* [R 4] Current value of response A counter credit. Initial credit is
+   configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
+   register. */
+#define DORQ_REG_RSPA_CRD_CNT					 0x1700ac
+/* [R 4] Current value of response B counter credit. Initial credit is
+   configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
+   register. */
+#define DORQ_REG_RSPB_CRD_CNT					 0x1700b0
+/* [RW 4] The initial credit at the Doorbell Response Interface. The write
+   writes the same initial credit to the rspa_crd_cnt and rspb_crd_cnt. The
+   read reads this written value. */
+#define DORQ_REG_RSP_INIT_CRD					 0x170048
+/* [RW 4] Initial activity counter value on the load request; when the
+   shortcut is done. */
+#define DORQ_REG_SHRT_ACT_CNT					 0x170070
+/* [RW 28] TCM Header when both ULP and TCP context is loaded. */
+#define DORQ_REG_SHRT_CMHEAD					 0x170054
+#define HC_CONFIG_0_REG_ATTN_BIT_EN_0				 (0x1<<4)
+#define HC_CONFIG_0_REG_INT_LINE_EN_0				 (0x1<<3)
+#define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0			 (0x1<<2)
+#define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 			 (0x1<<1)
+#define HC_REG_AGG_INT_0					 0x108050
+#define HC_REG_AGG_INT_1					 0x108054
+/* [RW 16] attention bit and attention acknowledge bits status for port 0
+   and 1 according to the following address map: addr 0 - attn_bit_0; addr 1
+   - attn_ack_bit_0; addr 2 - attn_bit_1; addr 3 - attn_ack_bit_1; */
+#define HC_REG_ATTN_BIT 					 0x108120
+/* [RW 16] attn bits status index for attn bit msg; addr 0 - function 0;
+   addr 1 - functin 1 */
+#define HC_REG_ATTN_IDX 					 0x108100
+/* [RW 32] port 0 lower 32 bits address field for attn messag. */
+#define HC_REG_ATTN_MSG0_ADDR_L 				 0x108018
+/* [RW 32] port 1 lower 32 bits address field for attn messag. */
+#define HC_REG_ATTN_MSG1_ADDR_L 				 0x108020
+/* [RW 8] status block number for attn bit msg - function 0; */
+#define HC_REG_ATTN_NUM_P0					 0x108038
+/* [RW 8] status block number for attn bit msg - function 1 */
+#define HC_REG_ATTN_NUM_P1					 0x10803c
+#define HC_REG_CONFIG_0 					 0x108000
+#define HC_REG_CONFIG_1 					 0x108004
+/* [RW 3] Parity mask register #0 read/write */
+#define HC_REG_HC_PRTY_MASK					 0x1080a0
+/* [RW 17] status block interrupt mask; one in each bit means unmask; zerow
+   in each bit means mask; bit 0 - default SB; bit 1 - SB_0; bit 2 - SB_1...
+   bit 16- SB_15; addr 0 - port 0; addr 1 - port 1 */
+#define HC_REG_INT_MASK 					 0x108108
+/* [RW 16] port 0 attn bit condition monitoring; each bit that is set will
+   lock a change fron 0 to 1 in the corresponding attention signals that
+   comes from the AEU */
+#define HC_REG_LEADING_EDGE_0					 0x108040
+#define HC_REG_LEADING_EDGE_1					 0x108048
+/* [RW 16] all producer and consumer of port 0 according to the following
+   addresses; U_prod: 0-15; C_prod: 16-31; U_cons: 32-47; C_cons:48-63;
+   Defoult_prod: U/C/X/T/Attn-64/65/66/67/68; Defoult_cons:
+   U/C/X/T/Attn-69/70/71/72/73 */
+#define HC_REG_P0_PROD_CONS					 0x108200
+/* [RW 16] all producer and consumer of port 1according to the following
+   addresses; U_prod: 0-15; C_prod: 16-31; U_cons: 32-47; C_cons:48-63;
+   Defoult_prod: U/C/X/T/Attn-64/65/66/67/68; Defoult_cons:
+   U/C/X/T/Attn-69/70/71/72/73 */
+#define HC_REG_P1_PROD_CONS					 0x108400
+/* [W 1] This register is write only and has 4 addresses as follow: 0 =
+   clear all PBA bits port 0; 1 = clear all pending interrupts request
+   port0; 2 = clear all PBA bits port 1; 3 = clear all pending interrupts
+   request port1; here is no meaning for the data in this register */
+#define HC_REG_PBA_COMMAND					 0x108140
+#define HC_REG_PCI_CONFIG_0					 0x108010
+#define HC_REG_PCI_CONFIG_1					 0x108014
+/* [RW 24] all counters acording to the following address: LSB: 0=read; 1=
+   read_clear; 0-71 = HW counters (the inside order is the same as the
+   interrupt table in the spec); 72-219 = SW counters 1 (stops after first
+   consumer upd) the inside order is: 72-103 - U_non_default_p0; 104-135
+   C_non_defaul_p0; 36-145 U/C/X/T/Attn_default_p0; 146-177
+   U_non_default_p1; 178-209 C_non_defaul_p1; 10-219 U/C/X/T/Attn_default_p1
+   ; 220-367 = SW counters 2 (stops when prod=cons) the inside order is:
+   220-251 - U_non_default_p0; 252-283 C_non_defaul_p0; 84-293
+   U/C/X/T/Attn_default_p0; 294-325 U_non_default_p1; 326-357
+   C_non_defaul_p1; 58-367 U/C/X/T/Attn_default_p1 ; 368-515 = mailbox
+   counters; (the inside order of the mailbox counter is 368-431 U and C
+   non_default_p0; 432-441 U/C/X/T/Attn_default_p0; 442-505 U and C
+   non_default_p1; 506-515 U/C/X/T/Attn_default_p1) */
+#define HC_REG_STATISTIC_COUNTERS				 0x109000
+/* [RW 16] port 0 attn bit condition monitoring; each bit that is set will
+   lock a change fron 1 to 0 in the corresponding attention signals that
+   comes from the AEU */
+#define HC_REG_TRAILING_EDGE_0					 0x108044
+#define HC_REG_TRAILING_EDGE_1					 0x10804c
+#define HC_REG_UC_RAM_ADDR_0					 0x108028
+#define HC_REG_UC_RAM_ADDR_1					 0x108030
+/* [RW 16] ustorm address for coalesc now message */
+#define HC_REG_USTORM_ADDR_FOR_COALESCE 			 0x108068
+#define HC_REG_VQID_0						 0x108008
+#define HC_REG_VQID_1						 0x10800c
+#define MCP_REG_MCPR_NVM_ACCESS_ENABLE				 0x86424
+#define MCP_REG_MCPR_NVM_ADDR					 0x8640c
+#define MCP_REG_MCPR_NVM_CFG4					 0x8642c
+#define MCP_REG_MCPR_NVM_COMMAND				 0x86400
+#define MCP_REG_MCPR_NVM_READ					 0x86410
+#define MCP_REG_MCPR_NVM_SW_ARB 				 0x86420
+#define MCP_REG_MCPR_NVM_WRITE					 0x86408
+#define MCP_REG_MCPR_NVM_WRITE1 				 0x86428
+#define MCP_REG_MCPR_SCRATCH					 0xa0000
+/* [R 32] read first 32 bit after inversion of function 0. mapped as
+   follows: [0] NIG attention for function0; [1] NIG attention for
+   function1; [2] GPIO1 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp;
+   [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9]
+   GPIO4 function 1; [10] PCIE glue/PXP VPD event function0; [11] PCIE
+   glue/PXP VPD event function1; [12] PCIE glue/PXP Expansion ROM event0;
+   [13] PCIE glue/PXP Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16]
+   MSI/X indication for mcp; [17] MSI/X indication for function 1; [18] BRB
+   Parity error; [19] BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw
+   interrupt; [22] SRC Parity error; [23] SRC Hw interrupt; [24] TSDM Parity
+   error; [25] TSDM Hw interrupt; [26] TCM Parity error; [27] TCM Hw
+   interrupt; [28] TSEMI Parity error; [29] TSEMI Hw interrupt; [30] PBF
+   Parity error; [31] PBF Hw interrupt; */
+#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_0			 0xa42c
+#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_1			 0xa430
+/* [R 32] read first 32 bit after inversion of mcp. mapped as follows: [0]
+   NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
+   mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
+   [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
+   PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
+   function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
+   Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
+   mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
+   BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
+   Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
+   interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
+   Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
+   interrupt; */
+#define MISC_REG_AEU_AFTER_INVERT_1_MCP 			 0xa434
+/* [R 32] read second 32 bit after inversion of function 0. mapped as
+   follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM