bnx2x: Create separate folder for bnx2x driver

This commit includes files movement to newly created folder
using git-mv command and fixes references in cnic and bnx2x code
to each other.

files moved using following:
#!/bin/bash
mkdir drivers/net/bnx2x/
list=$(cd drivers/net/ && ls bnx2x*.[ch])
for f in $list; do
        git mv -f drivers/net/$f drivers/net/bnx2x/$f
done

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 6735 insertions, 0 deletions

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
new file mode 100644
index 00000000000..0383e306631
--- /dev/null
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -0,0 +1,6735 @@
+/* Copyright 2008-2009 Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available
+ * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a
+ * license other than the GPL, without Broadcom's express prior written
+ * consent.
+ *
+ * Written by Yaniv Rosner
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mutex.h>
+
+#include "bnx2x.h"
+
+/********************************************************/
+#define ETH_HLEN			14
+#define ETH_OVREHEAD		(ETH_HLEN + 8)/* 8 for CRC + VLAN*/
+#define ETH_MIN_PACKET_SIZE		60
+#define ETH_MAX_PACKET_SIZE		1500
+#define ETH_MAX_JUMBO_PACKET_SIZE	9600
+#define MDIO_ACCESS_TIMEOUT		1000
+#define BMAC_CONTROL_RX_ENABLE	2
+
+/***********************************************************/
+/*			Shortcut definitions		   */
+/***********************************************************/
+
+#define NIG_LATCH_BC_ENABLE_MI_INT 0
+
+#define NIG_STATUS_EMAC0_MI_INT \
+		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT
+#define NIG_STATUS_XGXS0_LINK10G \
+		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G
+#define NIG_STATUS_XGXS0_LINK_STATUS \
+		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS
+#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \
+		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE
+#define NIG_STATUS_SERDES0_LINK_STATUS \
+		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS
+#define NIG_MASK_MI_INT \
+		NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT
+#define NIG_MASK_XGXS0_LINK10G \
+		NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G
+#define NIG_MASK_XGXS0_LINK_STATUS \
+		NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS
+#define NIG_MASK_SERDES0_LINK_STATUS \
+		NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS
+
+#define MDIO_AN_CL73_OR_37_COMPLETE \
+		(MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | \
+		 MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE)
+
+#define XGXS_RESET_BITS \
+	(MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW |   \
+	 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ |      \
+	 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN |    \
+	 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD | \
+	 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB)
+
+#define SERDES_RESET_BITS \
+	(MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW | \
+	 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ |    \
+	 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN |  \
+	 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD)
+
+#define AUTONEG_CL37		SHARED_HW_CFG_AN_ENABLE_CL37
+#define AUTONEG_CL73		SHARED_HW_CFG_AN_ENABLE_CL73
+#define AUTONEG_BAM 		SHARED_HW_CFG_AN_ENABLE_BAM
+#define AUTONEG_PARALLEL \
+				SHARED_HW_CFG_AN_ENABLE_PARALLEL_DETECTION
+#define AUTONEG_SGMII_FIBER_AUTODET \
+				SHARED_HW_CFG_AN_EN_SGMII_FIBER_AUTO_DETECT
+#define AUTONEG_REMOTE_PHY	SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY
+
+#define GP_STATUS_PAUSE_RSOLUTION_TXSIDE \
+			MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE
+#define GP_STATUS_PAUSE_RSOLUTION_RXSIDE \
+			MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE
+#define GP_STATUS_SPEED_MASK \
+			MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK
+#define GP_STATUS_10M	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M
+#define GP_STATUS_100M	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M
+#define GP_STATUS_1G	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G
+#define GP_STATUS_2_5G	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G
+#define GP_STATUS_5G	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G
+#define GP_STATUS_6G	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G
+#define GP_STATUS_10G_HIG \
+			MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG
+#define GP_STATUS_10G_CX4 \
+			MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4
+#define GP_STATUS_12G_HIG \
+			MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG
+#define GP_STATUS_12_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G
+#define GP_STATUS_13G	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G
+#define GP_STATUS_15G	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G
+#define GP_STATUS_16G	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G
+#define GP_STATUS_1G_KX MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX
+#define GP_STATUS_10G_KX4 \
+			MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4
+
+#define LINK_10THD			LINK_STATUS_SPEED_AND_DUPLEX_10THD
+#define LINK_10TFD			LINK_STATUS_SPEED_AND_DUPLEX_10TFD
+#define LINK_100TXHD		LINK_STATUS_SPEED_AND_DUPLEX_100TXHD
+#define LINK_100T4			LINK_STATUS_SPEED_AND_DUPLEX_100T4
+#define LINK_100TXFD		LINK_STATUS_SPEED_AND_DUPLEX_100TXFD
+#define LINK_1000THD		LINK_STATUS_SPEED_AND_DUPLEX_1000THD
+#define LINK_1000TFD		LINK_STATUS_SPEED_AND_DUPLEX_1000TFD
+#define LINK_1000XFD		LINK_STATUS_SPEED_AND_DUPLEX_1000XFD
+#define LINK_2500THD		LINK_STATUS_SPEED_AND_DUPLEX_2500THD
+#define LINK_2500TFD		LINK_STATUS_SPEED_AND_DUPLEX_2500TFD
+#define LINK_2500XFD		LINK_STATUS_SPEED_AND_DUPLEX_2500XFD
+#define LINK_10GTFD			LINK_STATUS_SPEED_AND_DUPLEX_10GTFD
+#define LINK_10GXFD			LINK_STATUS_SPEED_AND_DUPLEX_10GXFD
+#define LINK_12GTFD			LINK_STATUS_SPEED_AND_DUPLEX_12GTFD
+#define LINK_12GXFD			LINK_STATUS_SPEED_AND_DUPLEX_12GXFD
+#define LINK_12_5GTFD		LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD
+#define LINK_12_5GXFD		LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD
+#define LINK_13GTFD			LINK_STATUS_SPEED_AND_DUPLEX_13GTFD
+#define LINK_13GXFD			LINK_STATUS_SPEED_AND_DUPLEX_13GXFD
+#define LINK_15GTFD			LINK_STATUS_SPEED_AND_DUPLEX_15GTFD
+#define LINK_15GXFD			LINK_STATUS_SPEED_AND_DUPLEX_15GXFD
+#define LINK_16GTFD			LINK_STATUS_SPEED_AND_DUPLEX_16GTFD
+#define LINK_16GXFD			LINK_STATUS_SPEED_AND_DUPLEX_16GXFD
+
+#define PHY_XGXS_FLAG			0x1
+#define PHY_SGMII_FLAG			0x2
+#define PHY_SERDES_FLAG			0x4
+
+/* */
+#define SFP_EEPROM_CON_TYPE_ADDR		0x2
+	#define SFP_EEPROM_CON_TYPE_VAL_LC 		0x7
+	#define SFP_EEPROM_CON_TYPE_VAL_COPPER	0x21
+
+
+#define SFP_EEPROM_COMP_CODE_ADDR		0x3
+	#define SFP_EEPROM_COMP_CODE_SR_MASK	(1<<4)
+	#define SFP_EEPROM_COMP_CODE_LR_MASK	(1<<5)
+	#define SFP_EEPROM_COMP_CODE_LRM_MASK	(1<<6)
+
+#define SFP_EEPROM_FC_TX_TECH_ADDR		0x8
+	#define SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE 0x4
+	#define SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE	 0x8
+
+#define SFP_EEPROM_OPTIONS_ADDR 		0x40
+	#define SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK 0x1
+#define SFP_EEPROM_OPTIONS_SIZE 		2
+
+#define EDC_MODE_LINEAR	 			0x0022
+#define EDC_MODE_LIMITING	 			0x0044
+#define EDC_MODE_PASSIVE_DAC 			0x0055
+
+
+
+/**********************************************************/
+/*                     INTERFACE                          */
+/**********************************************************/
+#define CL45_WR_OVER_CL22(_bp, _port, _phy_addr, _bank, _addr, _val) \
+	bnx2x_cl45_write(_bp, _port, 0, _phy_addr, \
+		DEFAULT_PHY_DEV_ADDR, \
+		(_bank + (_addr & 0xf)), \
+		_val)
+
+#define CL45_RD_OVER_CL22(_bp, _port, _phy_addr, _bank, _addr, _val) \
+	bnx2x_cl45_read(_bp, _port, 0, _phy_addr, \
+		DEFAULT_PHY_DEV_ADDR, \
+		(_bank + (_addr & 0xf)), \
+		_val)
+
+static void bnx2x_set_serdes_access(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u32 emac_base = (params->port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+
+	/* Set Clause 22 */
+	REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + params->port*0x10, 1);
+	REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245f8000);
+	udelay(500);
+	REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245d000f);
+	udelay(500);
+	 /* Set Clause 45 */
+	REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + params->port*0x10, 0);
+}
+static void bnx2x_set_phy_mdio(struct link_params *params, u8 phy_flags)
+{
+	struct bnx2x *bp = params->bp;
+
+	if (phy_flags & PHY_XGXS_FLAG) {
+		REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST +
+			   params->port*0x18, 0);
+		REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port*0x18,
+			   DEFAULT_PHY_DEV_ADDR);
+	} else {
+		bnx2x_set_serdes_access(params);
+
+		REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_DEVAD +
+			   params->port*0x10,
+			   DEFAULT_PHY_DEV_ADDR);
+	}
+}
+
+static u32 bnx2x_bits_en(struct bnx2x *bp, u32 reg, u32 bits)
+{
+	u32 val = REG_RD(bp, reg);
+
+	val |= bits;
+	REG_WR(bp, reg, val);
+	return val;
+}
+
+static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits)
+{
+	u32 val = REG_RD(bp, reg);
+
+	val &= ~bits;
+	REG_WR(bp, reg, val);
+	return val;
+}
+
+static void bnx2x_emac_init(struct link_params *params,
+			   struct link_vars *vars)
+{
+	/* reset and unreset the emac core */
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+	u32 val;
+	u16 timeout;
+
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+		   (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
+	udelay(5);
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
+		   (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
+
+	/* init emac - use read-modify-write */
+	/* self clear reset */
+	val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
+	EMAC_WR(bp, EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET));
+
+	timeout = 200;
+	do {
+		val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
+		DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val);
+		if (!timeout) {
+			DP(NETIF_MSG_LINK, "EMAC timeout!\n");
+			return;
+		}
+		timeout--;
+	} while (val & EMAC_MODE_RESET);
+
+	/* Set mac address */
+	val = ((params->mac_addr[0] << 8) |
+		params->mac_addr[1]);
+	EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH, val);
+
+	val = ((params->mac_addr[2] << 24) |
+	       (params->mac_addr[3] << 16) |
+	       (params->mac_addr[4] << 8) |
+		params->mac_addr[5]);
+	EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + 4, val);
+}
+
+static u8 bnx2x_emac_enable(struct link_params *params,
+			  struct link_vars *vars, u8 lb)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+	u32 val;
+
+	DP(NETIF_MSG_LINK, "enabling EMAC\n");
+
+	/* enable emac and not bmac */
+	REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 1);
+
+	/* for paladium */
+	if (CHIP_REV_IS_EMUL(bp)) {
+		/* Use lane 1 (of lanes 0-3) */
+		REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1);
+		REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL +
+			    port*4, 1);
+	}
+	/* for fpga */
+	else
+
+	if (CHIP_REV_IS_FPGA(bp)) {
+		/* Use lane 1 (of lanes 0-3) */
+		DP(NETIF_MSG_LINK, "bnx2x_emac_enable: Setting FPGA\n");
+
+		REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1);
+		REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4,
+			    0);
+	} else
+	/* ASIC */
+	if (vars->phy_flags & PHY_XGXS_FLAG) {
+		u32 ser_lane = ((params->lane_config &
+			    PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
+			    PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
+
+		DP(NETIF_MSG_LINK, "XGXS\n");
+		/* select the master lanes (out of 0-3) */
+		REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 +
+			   port*4, ser_lane);
+		/* select XGXS */
+		REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL +
+			   port*4, 1);
+
+	} else { /* SerDes */
+		DP(NETIF_MSG_LINK, "SerDes\n");
+		/* select SerDes */
+		REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL +
+			   port*4, 0);
+	}
+
+	bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_RX_MODE,
+		    EMAC_RX_MODE_RESET);
+	bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_TX_MODE,
+		    EMAC_TX_MODE_RESET);
+
+	if (CHIP_REV_IS_SLOW(bp)) {
+		/* config GMII mode */
+		val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
+		EMAC_WR(bp, EMAC_REG_EMAC_MODE,
+			    (val | EMAC_MODE_PORT_GMII));
+	} else { /* ASIC */
+		/* pause enable/disable */
+		bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_RX_MODE,
+			       EMAC_RX_MODE_FLOW_EN);
+		if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
+			bnx2x_bits_en(bp, emac_base +
+				    EMAC_REG_EMAC_RX_MODE,
+				    EMAC_RX_MODE_FLOW_EN);
+
+		bnx2x_bits_dis(bp,  emac_base + EMAC_REG_EMAC_TX_MODE,
+			     (EMAC_TX_MODE_EXT_PAUSE_EN |
+			      EMAC_TX_MODE_FLOW_EN));
+		if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
+			bnx2x_bits_en(bp, emac_base +
+				    EMAC_REG_EMAC_TX_MODE,
+				   (EMAC_TX_MODE_EXT_PAUSE_EN |
+				    EMAC_TX_MODE_FLOW_EN));
+	}
+
+	/* KEEP_VLAN_TAG, promiscuous */
+	val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE);
+	val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS;
+	EMAC_WR(bp, EMAC_REG_EMAC_RX_MODE, val);
+
+	/* Set Loopback */
+	val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
+	if (lb)
+		val |= 0x810;
+	else
+		val &= ~0x810;
+	EMAC_WR(bp, EMAC_REG_EMAC_MODE, val);
+
+	/* enable emac */
+	REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1);
+
+	/* enable emac for jumbo packets */
+	EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE,
+		(EMAC_RX_MTU_SIZE_JUMBO_ENA |
+		 (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD)));
+
+	/* strip CRC */
+	REG_WR(bp, NIG_REG_NIG_INGRESS_EMAC0_NO_CRC + port*4, 0x1);
+
+	/* disable the NIG in/out to the bmac */
+	REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0x0);
+	REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, 0x0);
+	REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0x0);
+
+	/* enable the NIG in/out to the emac */
+	REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x1);
+	val = 0;
+	if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
+		val = 1;
+
+	REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, val);
+	REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x1);
+
+	if (CHIP_REV_IS_EMUL(bp)) {
+		/* take the BigMac out of reset */
+		REG_WR(bp,
+			   GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
+			   (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+
+		/* enable access for bmac registers */
+		REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1);
+	} else
+		REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x0);
+
+	vars->mac_type = MAC_TYPE_EMAC;
+	return 0;
+}
+
+
+
+static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars,
+			  u8 is_lb)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
+			       NIG_REG_INGRESS_BMAC0_MEM;
+	u32 wb_data[2];
+	u32 val;
+
+	DP(NETIF_MSG_LINK, "Enabling BigMAC\n");
+	/* reset and unreset the BigMac */
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+	       (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+	msleep(1);
+
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
+	       (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+
+	/* enable access for bmac registers */
+	REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1);
+
+	/* XGXS control */
+	wb_data[0] = 0x3c;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr +
+		      BIGMAC_REGISTER_BMAC_XGXS_CONTROL,
+		      wb_data, 2);
+
+	/* tx MAC SA */
+	wb_data[0] = ((params->mac_addr[2] << 24) |
+		       (params->mac_addr[3] << 16) |
+		       (params->mac_addr[4] << 8) |
+			params->mac_addr[5]);
+	wb_data[1] = ((params->mac_addr[0] << 8) |
+			params->mac_addr[1]);
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_SOURCE_ADDR,
+		    wb_data, 2);
+
+	/* tx control */
+	val = 0xc0;
+	if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
+		val |= 0x800000;
+	wb_data[0] = val;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_CONTROL,
+			wb_data, 2);
+
+	/* mac control */
+	val = 0x3;
+	if (is_lb) {
+		val |= 0x4;
+		DP(NETIF_MSG_LINK, "enable bmac loopback\n");
+	}
+	wb_data[0] = val;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
+		    wb_data, 2);
+
+	/* set rx mtu */
+	wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_MAX_SIZE,
+			wb_data, 2);
+
+	/* rx control set to don't strip crc */
+	val = 0x14;
+	if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
+		val |= 0x20;
+	wb_data[0] = val;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_CONTROL,
+			wb_data, 2);
+
+	/* set tx mtu */
+	wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_MAX_SIZE,
+			wb_data, 2);
+
+	/* set cnt max size */
+	wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_CNT_MAX_SIZE,
+		    wb_data, 2);
+
+	/* configure safc */
+	wb_data[0] = 0x1000200;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS,
+		    wb_data, 2);
+	/* fix for emulation */
+	if (CHIP_REV_IS_EMUL(bp)) {
+		wb_data[0] = 0xf000;
+		wb_data[1] = 0;
+		REG_WR_DMAE(bp,
+			    bmac_addr + BIGMAC_REGISTER_TX_PAUSE_THRESHOLD,
+			    wb_data, 2);
+	}
+
+	REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0x1);
+	REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 0x0);
+	REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 0x0);
+	val = 0;
+	if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
+		val = 1;
+	REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, val);
+	REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x0);
+	REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x0);
+	REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, 0x0);
+	REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0x1);
+	REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0x1);
+
+	vars->mac_type = MAC_TYPE_BMAC;
+	return 0;
+}
+
+static void bnx2x_phy_deassert(struct link_params *params, u8 phy_flags)
+{
+	struct bnx2x *bp = params->bp;
+	u32 val;
+
+	if (phy_flags & PHY_XGXS_FLAG) {
+		DP(NETIF_MSG_LINK, "bnx2x_phy_deassert:XGXS\n");
+		val = XGXS_RESET_BITS;
+
+	} else { /* SerDes */
+		DP(NETIF_MSG_LINK, "bnx2x_phy_deassert:SerDes\n");
+		val = SERDES_RESET_BITS;
+	}
+
+	val = val << (params->port*16);
+
+	/* reset and unreset the SerDes/XGXS */
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR,
+		    val);
+	udelay(500);
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET,
+		    val);
+	bnx2x_set_phy_mdio(params, phy_flags);
+}
+
+void bnx2x_link_status_update(struct link_params *params,
+			    struct link_vars   *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u8 link_10g;
+	u8 port = params->port;
+
+	if (params->switch_cfg ==  SWITCH_CFG_1G)
+		vars->phy_flags = PHY_SERDES_FLAG;
+	else
+		vars->phy_flags = PHY_XGXS_FLAG;
+	vars->link_status = REG_RD(bp, params->shmem_base +
+					  offsetof(struct shmem_region,
+					   port_mb[port].link_status));
+
+	vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP);
+
+	if (vars->link_up) {
+		DP(NETIF_MSG_LINK, "phy link up\n");
+
+		vars->phy_link_up = 1;
+		vars->duplex = DUPLEX_FULL;
+		switch (vars->link_status &
+					LINK_STATUS_SPEED_AND_DUPLEX_MASK) {
+			case LINK_10THD:
+				vars->duplex = DUPLEX_HALF;
+				/* fall thru */
+			case LINK_10TFD:
+				vars->line_speed = SPEED_10;
+				break;
+
+			case LINK_100TXHD:
+				vars->duplex = DUPLEX_HALF;
+				/* fall thru */
+			case LINK_100T4:
+			case LINK_100TXFD:
+				vars->line_speed = SPEED_100;
+				break;
+
+			case LINK_1000THD:
+				vars->duplex = DUPLEX_HALF;
+				/* fall thru */
+			case LINK_1000TFD:
+				vars->line_speed = SPEED_1000;
+				break;
+
+			case LINK_2500THD:
+				vars->duplex = DUPLEX_HALF;
+				/* fall thru */
+			case LINK_2500TFD:
+				vars->line_speed = SPEED_2500;
+				break;
+
+			case LINK_10GTFD:
+				vars->line_speed = SPEED_10000;
+				break;
+
+			case LINK_12GTFD:
+				vars->line_speed = SPEED_12000;
+				break;
+
+			case LINK_12_5GTFD:
+				vars->line_speed = SPEED_12500;
+				break;
+
+			case LINK_13GTFD:
+				vars->line_speed = SPEED_13000;
+				break;
+
+			case LINK_15GTFD:
+				vars->line_speed = SPEED_15000;
+				break;
+
+			case LINK_16GTFD:
+				vars->line_speed = SPEED_16000;
+				break;
+
+			default:
+				break;
+		}
+
+		if (vars->link_status & LINK_STATUS_TX_FLOW_CONTROL_ENABLED)
+			vars->flow_ctrl |= BNX2X_FLOW_CTRL_TX;
+		else
+			vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_TX;
+
+		if (vars->link_status & LINK_STATUS_RX_FLOW_CONTROL_ENABLED)
+			vars->flow_ctrl |= BNX2X_FLOW_CTRL_RX;
+		else
+			vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_RX;
+
+		if (vars->phy_flags & PHY_XGXS_FLAG) {
+			if (vars->line_speed &&
+			    ((vars->line_speed == SPEED_10) ||
+			     (vars->line_speed == SPEED_100))) {
+				vars->phy_flags |= PHY_SGMII_FLAG;
+			} else {
+				vars->phy_flags &= ~PHY_SGMII_FLAG;
+			}
+		}
+
+		/* anything 10 and over uses the bmac */
+		link_10g = ((vars->line_speed == SPEED_10000) ||
+			    (vars->line_speed == SPEED_12000) ||
+			    (vars->line_speed == SPEED_12500) ||
+			    (vars->line_speed == SPEED_13000) ||
+			    (vars->line_speed == SPEED_15000) ||
+			    (vars->line_speed == SPEED_16000));
+		if (link_10g)
+			vars->mac_type = MAC_TYPE_BMAC;
+		else
+			vars->mac_type = MAC_TYPE_EMAC;
+
+	} else { /* link down */
+		DP(NETIF_MSG_LINK, "phy link down\n");
+
+		vars->phy_link_up = 0;
+
+		vars->line_speed = 0;
+		vars->duplex = DUPLEX_FULL;
+		vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+
+		/* indicate no mac active */
+		vars->mac_type = MAC_TYPE_NONE;
+	}
+
+	DP(NETIF_MSG_LINK, "link_status 0x%x  phy_link_up %x\n",
+		 vars->link_status, vars->phy_link_up);
+	DP(NETIF_MSG_LINK, "line_speed %x  duplex %x  flow_ctrl 0x%x\n",
+		 vars->line_speed, vars->duplex, vars->flow_ctrl);
+}
+
+static void bnx2x_update_mng(struct link_params *params, u32 link_status)
+{
+	struct bnx2x *bp = params->bp;
+
+	REG_WR(bp, params->shmem_base +
+		   offsetof(struct shmem_region,
+			    port_mb[params->port].link_status),
+			link_status);
+}
+
+static void bnx2x_bmac_rx_disable(struct bnx2x *bp, u8 port)
+{
+	u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
+		NIG_REG_INGRESS_BMAC0_MEM;
+	u32 wb_data[2];
+	u32 nig_bmac_enable = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4);
+
+	/* Only if the bmac is out of reset */
+	if (REG_RD(bp, MISC_REG_RESET_REG_2) &
+			(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port) &&
+	    nig_bmac_enable) {
+
+		/* Clear Rx Enable bit in BMAC_CONTROL register */
+		REG_RD_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
+			    wb_data, 2);
+		wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE;
+		REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
+			    wb_data, 2);
+
+		msleep(1);
+	}
+}
+
+static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
+			 u32 line_speed)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u32 init_crd, crd;
+	u32 count = 1000;
+
+	/* disable port */
+	REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1);
+
+	/* wait for init credit */
+	init_crd = REG_RD(bp, PBF_REG_P0_INIT_CRD + port*4);
+	crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
+	DP(NETIF_MSG_LINK, "init_crd 0x%x  crd 0x%x\n", init_crd, crd);
+
+	while ((init_crd != crd) && count) {
+		msleep(5);
+
+		crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
+		count--;
+	}
+	crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
+	if (init_crd != crd) {
+		DP(NETIF_MSG_LINK, "BUG! init_crd 0x%x != crd 0x%x\n",
+			  init_crd, crd);
+		return -EINVAL;
+	}
+
+	if (flow_ctrl & BNX2X_FLOW_CTRL_RX ||
+	    line_speed == SPEED_10 ||
+	    line_speed == SPEED_100 ||
+	    line_speed == SPEED_1000 ||
+	    line_speed == SPEED_2500) {
+		REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 1);
+		/* update threshold */
+		REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, 0);
+		/* update init credit */
+		init_crd = 778; 	/* (800-18-4) */
+
+	} else {
+		u32 thresh = (ETH_MAX_JUMBO_PACKET_SIZE +
+			      ETH_OVREHEAD)/16;
+		REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
+		/* update threshold */
+		REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, thresh);
+		/* update init credit */
+		switch (line_speed) {
+		case SPEED_10000:
+			init_crd = thresh + 553 - 22;
+			break;
+
+		case SPEED_12000:
+			init_crd = thresh + 664 - 22;
+			break;
+
+		case SPEED_13000:
+			init_crd = thresh + 742 - 22;
+			break;
+
+		case SPEED_16000:
+			init_crd = thresh + 778 - 22;
+			break;
+		default:
+			DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n",
+				  line_speed);
+			return -EINVAL;
+		}
+	}
+	REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, init_crd);
+	DP(NETIF_MSG_LINK, "PBF updated to speed %d credit %d\n",
+		 line_speed, init_crd);
+
+	/* probe the credit changes */
+	REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x1);
+	msleep(5);
+	REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x0);
+
+	/* enable port */
+	REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x0);
+	return 0;
+}
+
+static u32 bnx2x_get_emac_base(struct bnx2x *bp, u32 ext_phy_type, u8 port)
+{
+	u32 emac_base;
+
+	switch (ext_phy_type) {
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
+		/* All MDC/MDIO is directed through single EMAC */
+		if (REG_RD(bp, NIG_REG_PORT_SWAP))
+			emac_base = GRCBASE_EMAC0;
+		else
+			emac_base = GRCBASE_EMAC1;
+		break;
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+		emac_base = (port) ? GRCBASE_EMAC0 : GRCBASE_EMAC1;
+		break;
+	default:
+		emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+		break;
+	}
+	return emac_base;
+
+}
+
+u8 bnx2x_cl45_write(struct bnx2x *bp, u8 port, u32 ext_phy_type,
+		  u8 phy_addr, u8 devad, u16 reg, u16 val)
+{
+	u32 tmp, saved_mode;
+	u8 i, rc = 0;
+	u32 mdio_ctrl = bnx2x_get_emac_base(bp, ext_phy_type, port);
+
+	/* set clause 45 mode, slow down the MDIO clock to 2.5MHz
+	 * (a value of 49==0x31) and make sure that the AUTO poll is off
+	 */
+
+	saved_mode = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+	tmp = saved_mode & ~(EMAC_MDIO_MODE_AUTO_POLL |
+			     EMAC_MDIO_MODE_CLOCK_CNT);
+	tmp |= (EMAC_MDIO_MODE_CLAUSE_45 |
+		(49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
+	REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
+	REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+	udelay(40);
+
+	/* address */
+
+	tmp = ((phy_addr << 21) | (devad << 16) | reg |
+	       EMAC_MDIO_COMM_COMMAND_ADDRESS |
+	       EMAC_MDIO_COMM_START_BUSY);
+	REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
+
+	for (i = 0; i < 50; i++) {
+		udelay(10);
+
+		tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
+		if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
+			udelay(5);
+			break;
+		}
+	}
+	if (tmp & EMAC_MDIO_COMM_START_BUSY) {
+		DP(NETIF_MSG_LINK, "write phy register failed\n");
+		rc = -EFAULT;
+	} else {
+		/* data */
+		tmp = ((phy_addr << 21) | (devad << 16) | val |
+		       EMAC_MDIO_COMM_COMMAND_WRITE_45 |
+		       EMAC_MDIO_COMM_START_BUSY);
+		REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
+
+		for (i = 0; i < 50; i++) {
+			udelay(10);
+
+			tmp = REG_RD(bp, mdio_ctrl +
+					 EMAC_REG_EMAC_MDIO_COMM);
+			if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
+				udelay(5);
+				break;
+			}
+		}
+		if (tmp & EMAC_MDIO_COMM_START_BUSY) {
+			DP(NETIF_MSG_LINK, "write phy register failed\n");
+			rc = -EFAULT;
+		}
+	}
+
+	/* Restore the saved mode */
+	REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, saved_mode);
+
+	return rc;
+}
+
+u8 bnx2x_cl45_read(struct bnx2x *bp, u8 port, u32 ext_phy_type,
+		 u8 phy_addr, u8 devad, u16 reg, u16 *ret_val)
+{
+	u32 val, saved_mode;
+	u16 i;
+	u8 rc = 0;
+
+	u32 mdio_ctrl = bnx2x_get_emac_base(bp, ext_phy_type, port);
+	/* set clause 45 mode, slow down the MDIO clock to 2.5MHz
+	 * (a value of 49==0x31) and make sure that the AUTO poll is off
+	 */
+
+	saved_mode = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+	val = saved_mode & ((EMAC_MDIO_MODE_AUTO_POLL |
+			     EMAC_MDIO_MODE_CLOCK_CNT));
+	val |= (EMAC_MDIO_MODE_CLAUSE_45 |
+		(49L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
+	REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
+	REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+	udelay(40);
+
+	/* address */
+	val = ((phy_addr << 21) | (devad << 16) | reg |
+	       EMAC_MDIO_COMM_COMMAND_ADDRESS |
+	       EMAC_MDIO_COMM_START_BUSY);
+	REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
+
+	for (i = 0; i < 50; i++) {
+		udelay(10);
+
+		val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
+		if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
+			udelay(5);
+			break;
+		}
+	}
+	if (val & EMAC_MDIO_COMM_START_BUSY) {
+		DP(NETIF_MSG_LINK, "read phy register failed\n");
+
+		*ret_val = 0;
+		rc = -EFAULT;
+
+	} else {
+		/* data */
+		val = ((phy_addr << 21) | (devad << 16) |
+		       EMAC_MDIO_COMM_COMMAND_READ_45 |
+		       EMAC_MDIO_COMM_START_BUSY);
+		REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
+
+		for (i = 0; i < 50; i++) {
+			udelay(10);
+
+			val = REG_RD(bp, mdio_ctrl +
+					  EMAC_REG_EMAC_MDIO_COMM);
+			if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
+				*ret_val = (u16)(val & EMAC_MDIO_COMM_DATA);
+				break;
+			}
+		}
+		if (val & EMAC_MDIO_COMM_START_BUSY) {
+			DP(NETIF_MSG_LINK, "read phy register failed\n");
+
+			*ret_val = 0;
+			rc = -EFAULT;
+		}
+	}
+
+	/* Restore the saved mode */
+	REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, saved_mode);
+
+	return rc;
+}
+
+static void bnx2x_set_aer_mmd(struct link_params *params,
+			    struct link_vars   *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u32 ser_lane;
+	u16 offset;
+
+	ser_lane = ((params->lane_config &
+		     PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
+		     PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
+
+	offset = (vars->phy_flags & PHY_XGXS_FLAG) ?
+		(params->phy_addr + ser_lane) : 0;
+
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_AER_BLOCK,
+			      MDIO_AER_BLOCK_AER_REG, 0x3800 + offset);
+}
+
+static void bnx2x_set_master_ln(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u16 new_master_ln, ser_lane;
+	ser_lane =  ((params->lane_config &
+		     PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
+		     PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
+
+	/* set the master_ln for AN */
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_XGXS_BLOCK2,
+			      MDIO_XGXS_BLOCK2_TEST_MODE_LANE,
+			      &new_master_ln);
+
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_XGXS_BLOCK2 ,
+			      MDIO_XGXS_BLOCK2_TEST_MODE_LANE,
+			      (new_master_ln | ser_lane));
+}
+
+static u8 bnx2x_reset_unicore(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u16 mii_control;
+	u16 i;
+
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_COMBO_IEEE0,
+			      MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control);
+
+	/* reset the unicore */
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_COMBO_IEEE0,
+			      MDIO_COMBO_IEEE0_MII_CONTROL,
+			      (mii_control |
+			       MDIO_COMBO_IEEO_MII_CONTROL_RESET));
+	if (params->switch_cfg == SWITCH_CFG_1G)
+		bnx2x_set_serdes_access(params);
+
+	/* wait for the reset to self clear */
+	for (i = 0; i < MDIO_ACCESS_TIMEOUT; i++) {
+		udelay(5);
+
+		/* the reset erased the previous bank value */
+		CL45_RD_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+			      MDIO_REG_BANK_COMBO_IEEE0,
+			      MDIO_COMBO_IEEE0_MII_CONTROL,
+			      &mii_control);
+
+		if (!(mii_control & MDIO_COMBO_IEEO_MII_CONTROL_RESET)) {
+			udelay(5);
+			return 0;
+		}
+	}
+
+	DP(NETIF_MSG_LINK, "BUG! XGXS is still in reset!\n");
+	return -EINVAL;
+
+}
+
+static void bnx2x_set_swap_lanes(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	/* Each two bits represents a lane number:
+	   No swap is 0123 => 0x1b no need to enable the swap */
+	u16 ser_lane, rx_lane_swap, tx_lane_swap;
+
+	ser_lane = ((params->lane_config &
+			 PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
+			PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
+	rx_lane_swap = ((params->lane_config &
+			     PORT_HW_CFG_LANE_SWAP_CFG_RX_MASK) >>
+			    PORT_HW_CFG_LANE_SWAP_CFG_RX_SHIFT);
+	tx_lane_swap = ((params->lane_config &
+			     PORT_HW_CFG_LANE_SWAP_CFG_TX_MASK) >>
+			    PORT_HW_CFG_LANE_SWAP_CFG_TX_SHIFT);
+
+	if (rx_lane_swap != 0x1b) {
+		CL45_WR_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				    MDIO_REG_BANK_XGXS_BLOCK2,
+				    MDIO_XGXS_BLOCK2_RX_LN_SWAP,
+				    (rx_lane_swap |
+				    MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE |
+				    MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE));
+	} else {
+		CL45_WR_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_XGXS_BLOCK2,
+				      MDIO_XGXS_BLOCK2_RX_LN_SWAP, 0);
+	}
+
+	if (tx_lane_swap != 0x1b) {
+		CL45_WR_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_XGXS_BLOCK2,
+				      MDIO_XGXS_BLOCK2_TX_LN_SWAP,
+				      (tx_lane_swap |
+				       MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE));
+	} else {
+		CL45_WR_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_XGXS_BLOCK2,