eth16i: Move the Allied Telesis/Fujitsu drivers

Move the Allied Telesis/Fujitsu drivers into drivers/net/ethernet/fujitsu/
and make the necessary Kconfig and Makefile changes.

CC: Shingo Fujimoto <shingo@flab.fujitsu.co.jp>
CC: Yutaka Tamiya <tamy@flab.fujitsu.co.jp>
CC: Rene Schmit <rene@bss.lu>
CC: Mika Kuoppala <miku@iki.fi>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 900 deletions

diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c
deleted file mode 100644
index 65a78f965dd..00000000000
--- a/drivers/net/at1700.c
+++ /dev/null
@@ -1,900 +0,0 @@
-/* at1700.c: A network device driver for  the Allied Telesis AT1700.
-
-	Written 1993-98 by Donald Becker.
-
-	Copyright 1993 United States Government as represented by the
-	Director, National Security Agency.
-
-	This software may be used and distributed according to the terms
-	of the GNU General Public License, incorporated herein by reference.
-
-	The author may be reached as becker@scyld.com, or C/O
-	Scyld Computing Corporation
-	410 Severn Ave., Suite 210
-	Annapolis MD 21403
-
-	This is a device driver for the Allied Telesis AT1700, and
-        Fujitsu FMV-181/182/181A/182A/183/184/183A/184A, which are
-	straight-forward Fujitsu MB86965 implementations.
-
-	Modification for Fujitsu FMV-18X cards is done by Yutaka Tamiya
-	(tamy@flab.fujitsu.co.jp).
-
-  Sources:
-    The Fujitsu MB86965 datasheet.
-
-	After the initial version of this driver was written Gerry Sawkins of
-	ATI provided their EEPROM configuration code header file.
-    Thanks to NIIBE Yutaka <gniibe@mri.co.jp> for bug fixes.
-
-    MCA bus (AT1720) support by Rene Schmit <rene@bss.lu>
-
-  Bugs:
-	The MB86965 has a design flaw that makes all probes unreliable.  Not
-	only is it difficult to detect, it also moves around in I/O space in
-	response to inb()s from other device probes!
-*/
-
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/mca-legacy.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/skbuff.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/crc32.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-
-static char version[] __initdata =
-	"at1700.c:v1.16 9/11/06  Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
-
-#define DRV_NAME "at1700"
-
-/* Tunable parameters. */
-
-/* When to switch from the 64-entry multicast filter to Rx-all-multicast. */
-#define MC_FILTERBREAK 64
-
-/* These unusual address orders are used to verify the CONFIG register. */
-
-static int fmv18x_probe_list[] __initdata = {
-	0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x300, 0x340, 0
-};
-
-/*
- *	ISA
- */
-
-static unsigned at1700_probe_list[] __initdata = {
-	0x260, 0x280, 0x2a0, 0x240, 0x340, 0x320, 0x380, 0x300, 0
-};
-
-/*
- *	MCA
- */
-#ifdef CONFIG_MCA_LEGACY
-static int at1700_ioaddr_pattern[] __initdata = {
-	0x00, 0x04, 0x01, 0x05, 0x02, 0x06, 0x03, 0x07
-};
-
-static int at1700_mca_probe_list[] __initdata = {
-	0x400, 0x1400, 0x2400, 0x3400, 0x4400, 0x5400, 0x6400, 0x7400, 0
-};
-
-static int at1700_irq_pattern[] __initdata = {
-	0x00, 0x00, 0x00, 0x30, 0x70, 0xb0, 0x00, 0x00,
-	0x00, 0xf0, 0x34, 0x74, 0xb4, 0x00, 0x00, 0xf4, 0x00
-};
-#endif
-
-/* use 0 for production, 1 for verification, >2 for debug */
-#ifndef NET_DEBUG
-#define NET_DEBUG 1
-#endif
-static unsigned int net_debug = NET_DEBUG;
-
-typedef unsigned char uchar;
-
-/* Information that need to be kept for each board. */
-struct net_local {
-	spinlock_t lock;
-	unsigned char mc_filter[8];
-	uint jumpered:1;			/* Set iff the board has jumper config. */
-	uint tx_started:1;			/* Packets are on the Tx queue. */
-	uint tx_queue_ready:1;			/* Tx queue is ready to be sent. */
-	uint rx_started:1;			/* Packets are Rxing. */
-	uchar tx_queue;				/* Number of packet on the Tx queue. */
-	char mca_slot;				/* -1 means ISA */
-	ushort tx_queue_len;			/* Current length of the Tx queue. */
-};
-
-
-/* Offsets from the base address. */
-#define STATUS			0
-#define TX_STATUS		0
-#define RX_STATUS		1
-#define TX_INTR			2		/* Bit-mapped interrupt enable registers. */
-#define RX_INTR			3
-#define TX_MODE			4
-#define RX_MODE			5
-#define CONFIG_0		6		/* Misc. configuration settings. */
-#define CONFIG_1		7
-/* Run-time register bank 2 definitions. */
-#define DATAPORT		8		/* Word-wide DMA or programmed-I/O dataport. */
-#define TX_START		10
-#define COL16CNTL		11		/* Control Reg for 16 collisions */
-#define MODE13			13
-#define RX_CTRL			14
-/* Configuration registers only on the '865A/B chips. */
-#define EEPROM_Ctrl 	16
-#define EEPROM_Data 	17
-#define CARDSTATUS	16			/* FMV-18x Card Status */
-#define CARDSTATUS1	17			/* FMV-18x Card Status */
-#define IOCONFIG		18		/* Either read the jumper, or move the I/O. */
-#define IOCONFIG1		19
-#define	SAPROM			20		/* The station address PROM, if no EEPROM. */
-#define MODE24			24
-#define RESET			31		/* Write to reset some parts of the chip. */
-#define AT1700_IO_EXTENT	32
-#define PORT_OFFSET(o) (o)
-
-
-#define TX_TIMEOUT		(HZ/10)
-
-
-/* Index to functions, as function prototypes. */
-
-static int at1700_probe1(struct net_device *dev, int ioaddr);
-static int read_eeprom(long ioaddr, int location);
-static int net_open(struct net_device *dev);
-static netdev_tx_t net_send_packet(struct sk_buff *skb,
-				   struct net_device *dev);
-static irqreturn_t net_interrupt(int irq, void *dev_id);
-static void net_rx(struct net_device *dev);
-static int net_close(struct net_device *dev);
-static void set_rx_mode(struct net_device *dev);
-static void net_tx_timeout (struct net_device *dev);
-
-
-#ifdef CONFIG_MCA_LEGACY
-struct at1720_mca_adapters_struct {
-	char* name;
-	int id;
-};
-/* rEnE : maybe there are others I don't know off... */
-
-static struct at1720_mca_adapters_struct at1720_mca_adapters[] __initdata = {
-	{ "Allied Telesys AT1720AT",	0x6410 },
-	{ "Allied Telesys AT1720BT", 	0x6413 },
-	{ "Allied Telesys AT1720T",	0x6416 },
-	{ NULL, 0 },
-};
-#endif
-
-/* Check for a network adaptor of this type, and return '0' iff one exists.
-   If dev->base_addr == 0, probe all likely locations.
-   If dev->base_addr == 1, always return failure.
-   If dev->base_addr == 2, allocate space for the device and return success
-   (detachable devices only).
-   */
-
-static int io = 0x260;
-
-static int irq;
-
-static void cleanup_card(struct net_device *dev)
-{
-#ifdef CONFIG_MCA_LEGACY
-	struct net_local *lp = netdev_priv(dev);
-	if (lp->mca_slot >= 0)
-		mca_mark_as_unused(lp->mca_slot);
-#endif
-	free_irq(dev->irq, NULL);
-	release_region(dev->base_addr, AT1700_IO_EXTENT);
-}
-
-struct net_device * __init at1700_probe(int unit)
-{
-	struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
-	unsigned *port;
-	int err = 0;
-
-	if (!dev)
-		return ERR_PTR(-ENODEV);
-
-	if (unit >= 0) {
-		sprintf(dev->name, "eth%d", unit);
-		netdev_boot_setup_check(dev);
-		io = dev->base_addr;
-		irq = dev->irq;
-	} else {
-		dev->base_addr = io;
-		dev->irq = irq;
-	}
-
-	if (io > 0x1ff) {	/* Check a single specified location. */
-		err = at1700_probe1(dev, io);
-	} else if (io != 0) {	/* Don't probe at all. */
-		err = -ENXIO;
-	} else {
-		for (port = at1700_probe_list; *port; port++) {
-			if (at1700_probe1(dev, *port) == 0)
-				break;
-			dev->irq = irq;
-		}
-		if (!*port)
-			err = -ENODEV;
-	}
-	if (err)
-		goto out;
-	err = register_netdev(dev);
-	if (err)
-		goto out1;
-	return dev;
-out1:
-	cleanup_card(dev);
-out:
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-
-static const struct net_device_ops at1700_netdev_ops = {
-	.ndo_open		= net_open,
-	.ndo_stop		= net_close,
-	.ndo_start_xmit 	= net_send_packet,
-	.ndo_set_multicast_list = set_rx_mode,
-	.ndo_tx_timeout 	= net_tx_timeout,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-/* The Fujitsu datasheet suggests that the NIC be probed for by checking its
-   "signature", the default bit pattern after a reset.  This *doesn't* work --
-   there is no way to reset the bus interface without a complete power-cycle!
-
-   It turns out that ATI came to the same conclusion I did: the only thing
-   that can be done is checking a few bits and then diving right into an
-   EEPROM read. */
-
-static int __init at1700_probe1(struct net_device *dev, int ioaddr)
-{
-	static const char fmv_irqmap[4] = {3, 7, 10, 15};
-	static const char fmv_irqmap_pnp[8] = {3, 4, 5, 7, 9, 10, 11, 15};
-	static const char at1700_irqmap[8] = {3, 4, 5, 9, 10, 11, 14, 15};
-	unsigned int i, irq, is_fmv18x = 0, is_at1700 = 0;
-	int slot, ret = -ENODEV;
-	struct net_local *lp = netdev_priv(dev);
-
-	if (!request_region(ioaddr, AT1700_IO_EXTENT, DRV_NAME))
-		return -EBUSY;
-
-	/* Resetting the chip doesn't reset the ISA interface, so don't bother.
-	   That means we have to be careful with the register values we probe
-	   for.
-	 */
-#ifdef notdef
-	printk("at1700 probe at %#x, eeprom is %4.4x %4.4x %4.4x ctrl %4.4x.\n",
-		   ioaddr, read_eeprom(ioaddr, 4), read_eeprom(ioaddr, 5),
-		   read_eeprom(ioaddr, 6), inw(ioaddr + EEPROM_Ctrl));
-#endif
-
-#ifdef CONFIG_MCA_LEGACY
-	/* rEnE (rene@bss.lu): got this from 3c509 driver source , adapted for AT1720 */
-
-    /* Based on Erik Nygren's (nygren@mit.edu) 3c529 patch, heavily
-	modified by Chris Beauregard (cpbeaure@csclub.uwaterloo.ca)
-	to support standard MCA probing. */
-
-	/* redone for multi-card detection by ZP Gu (zpg@castle.net) */
-	/* now works as a module */
-
-	if (MCA_bus) {
-		int j;
-		int l_i;
-		u_char pos3, pos4;
-
-		for (j = 0; at1720_mca_adapters[j].name != NULL; j ++) {
-			slot = 0;
-			while (slot != MCA_NOTFOUND) {
-
-				slot = mca_find_unused_adapter( at1720_mca_adapters[j].id, slot );
-				if (slot == MCA_NOTFOUND) break;
-
-				/* if we get this far, an adapter has been detected and is
-				enabled */
-
-				pos3 = mca_read_stored_pos( slot, 3 );
-				pos4 = mca_read_stored_pos( slot, 4 );
-
-				for (l_i = 0; l_i < 8; l_i++)
-					if (( pos3 & 0x07) == at1700_ioaddr_pattern[l_i])
-						break;
-				ioaddr = at1700_mca_probe_list[l_i];
-
-				for (irq = 0; irq < 0x10; irq++)
-					if (((((pos4>>4) & 0x0f) | (pos3 & 0xf0)) & 0xff) == at1700_irq_pattern[irq])
-						break;
-
-					/* probing for a card at a particular IO/IRQ */
-				if ((dev->irq && dev->irq != irq) ||
-				    (dev->base_addr && dev->base_addr != ioaddr)) {
-				  	slot++;		/* probing next slot */
-				  	continue;
-				}
-
-				dev->irq = irq;
-
-				/* claim the slot */
-				mca_set_adapter_name( slot, at1720_mca_adapters[j].name );
-				mca_mark_as_used(slot);
-
-				goto found;
-			}
-		}
-		/* if we get here, we didn't find an MCA adapter - try ISA */
-	}
-#endif
-	slot = -1;
-	/* We must check for the EEPROM-config boards first, else accessing
-	   IOCONFIG0 will move the board! */
-	if (at1700_probe_list[inb(ioaddr + IOCONFIG1) & 0x07] == ioaddr &&
-	    read_eeprom(ioaddr, 4) == 0x0000 &&
-	    (read_eeprom(ioaddr, 5) & 0xff00) == 0xF400)
-		is_at1700 = 1;
-	else if (inb(ioaddr + SAPROM    ) == 0x00 &&
-		 inb(ioaddr + SAPROM + 1) == 0x00 &&
-		 inb(ioaddr + SAPROM + 2) == 0x0e)
-		is_fmv18x = 1;
-	else {
-		goto err_out;
-	}
-
-#ifdef CONFIG_MCA_LEGACY
-found:
-#endif
-
-		/* Reset the internal state machines. */
-	outb(0, ioaddr + RESET);
-
-	if (is_at1700) {
-		irq = at1700_irqmap[(read_eeprom(ioaddr, 12)&0x04)
-						   | (read_eeprom(ioaddr, 0)>>14)];
-	} else {
-		/* Check PnP mode for FMV-183/184/183A/184A. */
-		/* This PnP routine is very poor. IO and IRQ should be known. */
-		if (inb(ioaddr + CARDSTATUS1) & 0x20) {
-			irq = dev->irq;
-			for (i = 0; i < 8; i++) {
-				if (irq == fmv_irqmap_pnp[i])
-					break;
-			}
-			if (i == 8) {
-				goto err_mca;
-			}
-		} else {
-			if (fmv18x_probe_list[inb(ioaddr + IOCONFIG) & 0x07] != ioaddr)
-				goto err_mca;
-			irq = fmv_irqmap[(inb(ioaddr + IOCONFIG)>>6) & 0x03];
-		}
-	}
-
-	printk("%s: %s found at %#3x, IRQ %d, address ", dev->name,
-		   is_at1700 ? "AT1700" : "FMV-18X", ioaddr, irq);
-
-	dev->base_addr = ioaddr;
-	dev->irq = irq;
-
-	if (is_at1700) {
-		for(i = 0; i < 3; i++) {
-			unsigned short eeprom_val = read_eeprom(ioaddr, 4+i);
-			((unsigned short *)dev->dev_addr)[i] = ntohs(eeprom_val);
-		}
-	} else {
-		for(i = 0; i < 6; i++) {
-			unsigned char val = inb(ioaddr + SAPROM + i);
-			dev->dev_addr[i] = val;
-		}
-	}
-	printk("%pM", dev->dev_addr);
-
-	/* The EEPROM word 12 bit 0x0400 means use regular 100 ohm 10baseT signals,
-	   rather than 150 ohm shielded twisted pair compensation.
-	   0x0000 == auto-sense the interface
-	   0x0800 == use TP interface
-	   0x1800 == use coax interface
-	   */
-	{
-		const char *porttype[] = {"auto-sense", "10baseT", "auto-sense", "10base2"};
-		if (is_at1700) {
-			ushort setup_value = read_eeprom(ioaddr, 12);
-			dev->if_port = setup_value >> 8;
-		} else {
-			ushort setup_value = inb(ioaddr + CARDSTATUS);
-			switch (setup_value & 0x07) {
-			case 0x01: /* 10base5 */
-			case 0x02: /* 10base2 */
-				dev->if_port = 0x18; break;
-			case 0x04: /* 10baseT */
-				dev->if_port = 0x08; break;
-			default:   /* auto-sense */
-				dev->if_port = 0x00; break;
-			}
-		}
-		printk(" %s interface.\n", porttype[(dev->if_port>>3) & 3]);
-	}
-
-	/* Set the configuration register 0 to 32K 100ns. byte-wide memory, 16 bit
-	   bus access, two 4K Tx queues, and disabled Tx and Rx. */
-	outb(0xda, ioaddr + CONFIG_0);
-
-	/* Set the station address in bank zero. */
-	outb(0x00, ioaddr + CONFIG_1);
-	for (i = 0; i < 6; i++)
-		outb(dev->dev_addr[i], ioaddr + PORT_OFFSET(8 + i));
-
-	/* Switch to bank 1 and set the multicast table to accept none. */
-	outb(0x04, ioaddr + CONFIG_1);
-	for (i = 0; i < 8; i++)
-		outb(0x00, ioaddr + PORT_OFFSET(8 + i));
-
-
-	/* Switch to bank 2 */
-	/* Lock our I/O address, and set manual processing mode for 16 collisions. */
-	outb(0x08, ioaddr + CONFIG_1);
-	outb(dev->if_port, ioaddr + MODE13);
-	outb(0x00, ioaddr + COL16CNTL);
-
-	if (net_debug)
-		printk(version);
-
-	dev->netdev_ops = &at1700_netdev_ops;
-	dev->watchdog_timeo = TX_TIMEOUT;
-
-	spin_lock_init(&lp->lock);
-
-	lp->jumpered = is_fmv18x;
-	lp->mca_slot = slot;
-	/* Snarf the interrupt vector now. */
-	ret = request_irq(irq, net_interrupt, 0, DRV_NAME, dev);
-	if (ret) {
-		printk(KERN_ERR "AT1700 at %#3x is unusable due to a "
-		       "conflict on IRQ %d.\n",
-		       ioaddr, irq);
-		goto err_mca;
-	}
-
-	return 0;
-
-err_mca:
-#ifdef CONFIG_MCA_LEGACY
-	if (slot >= 0)
-		mca_mark_as_unused(slot);
-#endif
-err_out:
-	release_region(ioaddr, AT1700_IO_EXTENT);
-	return ret;
-}
-
-
-/*  EEPROM_Ctrl bits. */
-#define EE_SHIFT_CLK	0x40	/* EEPROM shift clock, in reg. 16. */
-#define EE_CS			0x20	/* EEPROM chip select, in reg. 16. */
-#define EE_DATA_WRITE	0x80	/* EEPROM chip data in, in reg. 17. */
-#define EE_DATA_READ	0x80	/* EEPROM chip data out, in reg. 17. */
-
-/* The EEPROM commands include the alway-set leading bit. */
-#define EE_WRITE_CMD	(5 << 6)
-#define EE_READ_CMD		(6 << 6)
-#define EE_ERASE_CMD	(7 << 6)
-
-static int __init read_eeprom(long ioaddr, int location)
-{
-	int i;
-	unsigned short retval = 0;
-	long ee_addr = ioaddr + EEPROM_Ctrl;
-	long ee_daddr = ioaddr + EEPROM_Data;
-	int read_cmd = location | EE_READ_CMD;
-
-	/* Shift the read command bits out. */
-	for (i = 9; i >= 0; i--) {
-		short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
-		outb(EE_CS, ee_addr);
-		outb(dataval, ee_daddr);
-		outb(EE_CS | EE_SHIFT_CLK, ee_addr);	/* EEPROM clock tick. */
-	}
-	outb(EE_DATA_WRITE, ee_daddr);
-	for (i = 16; i > 0; i--) {
-		outb(EE_CS, ee_addr);
-		outb(EE_CS | EE_SHIFT_CLK, ee_addr);
-		retval = (retval << 1) | ((inb(ee_daddr) & EE_DATA_READ) ? 1 : 0);
-	}
-
-	/* Terminate the EEPROM access. */
-	outb(EE_CS, ee_addr);
-	outb(EE_SHIFT_CLK, ee_addr);
-	outb(0, ee_addr);
-	return retval;
-}
-
-
-
-static int net_open(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-
-	/* Set the configuration register 0 to 32K 100ns. byte-wide memory, 16 bit
-	   bus access, and two 4K Tx queues. */
-	outb(0x5a, ioaddr + CONFIG_0);
-
-	/* Powerup, switch to register bank 2, and enable the Rx and Tx. */
-	outb(0xe8, ioaddr + CONFIG_1);
-
-	lp->tx_started = 0;
-	lp->tx_queue_ready = 1;
-	lp->rx_started = 0;
-	lp->tx_queue = 0;
-	lp->tx_queue_len = 0;
-
-	/* Turn on hardware Tx and Rx interrupts. */
-	outb(0x82, ioaddr + TX_INTR);
-	outb(0x81, ioaddr + RX_INTR);
-
-	/* Enable the IRQ on boards of fmv18x it is feasible. */
-	if (lp->jumpered) {
-		outb(0x80, ioaddr + IOCONFIG1);
-	}
-
-	netif_start_queue(dev);
-	return 0;
-}
-
-static void net_tx_timeout (struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-
-	printk ("%s: transmit timed out with status %04x, %s?\n", dev->name,
-		inw (ioaddr + STATUS), inb (ioaddr + TX_STATUS) & 0x80
-		? "IRQ conflict" : "network cable problem");
-	printk ("%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n",
-	 dev->name, inw(ioaddr + TX_STATUS), inw(ioaddr + TX_INTR), inw(ioaddr + TX_MODE),
-		inw(ioaddr + CONFIG_0), inw(ioaddr + DATAPORT), inw(ioaddr + TX_START),
-		inw(ioaddr + MODE13 - 1), inw(ioaddr + RX_CTRL));
-	dev->stats.tx_errors++;
-	/* ToDo: We should try to restart the adaptor... */
-	outw(0xffff, ioaddr + MODE24);
-	outw (0xffff, ioaddr + TX_STATUS);
-	outb (0x5a, ioaddr + CONFIG_0);
-	outb (0xe8, ioaddr + CONFIG_1);
-	outw (0x8182, ioaddr + TX_INTR);
-	outb (0x00, ioaddr + TX_START);
-	outb (0x03, ioaddr + COL16CNTL);
-
-	dev->trans_start = jiffies; /* prevent tx timeout */
-
-	lp->tx_started = 0;
-	lp->tx_queue_ready = 1;
-	lp->rx_started = 0;
-	lp->tx_queue = 0;
-	lp->tx_queue_len = 0;
-
-	netif_wake_queue(dev);
-}
-
-
-static netdev_tx_t net_send_packet (struct sk_buff *skb,
-				    struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-	short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
-	short len = skb->len;
-	unsigned char *buf = skb->data;
-	static u8 pad[ETH_ZLEN];
-
-	netif_stop_queue (dev);
-
-	/* We may not start transmitting unless we finish transferring
-	   a packet into the Tx queue. During executing the following
-	   codes we possibly catch a Tx interrupt. Thus we flag off
-	   tx_queue_ready, so that we prevent the interrupt routine
-	   (net_interrupt) to start transmitting. */
-	lp->tx_queue_ready = 0;
-	{
-		outw (length, ioaddr + DATAPORT);
-		/* Packet data */
-		outsw (ioaddr + DATAPORT, buf, len >> 1);
-		/* Check for dribble byte */
-		if (len & 1) {
-			outw(skb->data[skb->len-1], ioaddr + DATAPORT);
-			len++;
-		}
-		/* Check for packet padding */
-		if (length != skb->len)
-			outsw(ioaddr + DATAPORT, pad, (length - len + 1) >> 1);
-
-		lp->tx_queue++;
-		lp->tx_queue_len += length + 2;
-	}
-	lp->tx_queue_ready = 1;
-
-	if (lp->tx_started == 0) {
-		/* If the Tx is idle, always trigger a transmit. */
-		outb (0x80 | lp->tx_queue, ioaddr + TX_START);
-		lp->tx_queue = 0;
-		lp->tx_queue_len = 0;
-		lp->tx_started = 1;
-		netif_start_queue (dev);
-	} else if (lp->tx_queue_len < 4096 - 1502)
-		/* Yes, there is room for one more packet. */
-		netif_start_queue (dev);
-	dev_kfree_skb (skb);
-
-	return NETDEV_TX_OK;
-}
-
-/* The typical workload of the driver:
-   Handle the network interface interrupts. */
-static irqreturn_t net_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct net_local *lp;
-	int ioaddr, status;
-	int handled = 0;
-
-	if (dev == NULL) {
-		printk ("at1700_interrupt(): irq %d for unknown device.\n", irq);
-		return IRQ_NONE;
-	}
-
-	ioaddr = dev->base_addr;
-	lp = netdev_priv(dev);
-
-	spin_lock (&lp->lock);
-
-	status = inw(ioaddr + TX_STATUS);
-	outw(status, ioaddr + TX_STATUS);
-
-	if (net_debug > 4)
-		printk("%s: Interrupt with status %04x.\n", dev->name, status);
-	if (lp->rx_started == 0 &&
-	    (status & 0xff00 || (inb(ioaddr + RX_MODE) & 0x40) == 0)) {
-		/* Got a packet(s).
-		   We cannot execute net_rx more than once at the same time for
-		   the same device. During executing net_rx, we possibly catch a
-		   Tx interrupt. Thus we flag on rx_started, so that we prevent
-		   the interrupt routine (net_interrupt) to dive into net_rx
-		   again. */
-		handled = 1;
-		lp->rx_started = 1;
-		outb(0x00, ioaddr + RX_INTR);	/* Disable RX intr. */
-		net_rx(dev);
-		outb(0x81, ioaddr + RX_INTR);	/* Enable  RX intr. */
-		lp->rx_started = 0;
-	}
-	if (status & 0x00ff) {
-		handled = 1;
-		if (status & 0x02) {
-			/* More than 16 collisions occurred */
-			if (net_debug > 4)
-				printk("%s: 16 Collision occur during Txing.\n", dev->name);
-			/* Cancel sending a packet. */
-			outb(0x03, ioaddr + COL16CNTL);
-			dev->stats.collisions++;
-		}
-		if (status & 0x82) {
-			dev->stats.tx_packets++;
-			/* The Tx queue has any packets and is not being
-			   transferred a packet from the host, start
-			   transmitting. */
-			if (lp->tx_queue && lp->tx_queue_ready) {
-				outb(0x80 | lp->tx_queue, ioaddr + TX_START);
-				lp->tx_queue = 0;
-				lp->tx_queue_len = 0;
-				dev->trans_start = jiffies;
-				netif_wake_queue (dev);
-			} else {
-				lp->tx_started = 0;
-				netif_wake_queue (dev);
-			}
-		}
-	}
-
-	spin_unlock (&lp->lock);
-	return IRQ_RETVAL(handled);
-}
-
-/* We have a good packet(s), get it/them out of the buffers. */
-static void
-net_rx(struct net_device *dev)
-{
-	int ioaddr = dev->base_addr;
-	int boguscount = 5;
-
-	while ((inb(ioaddr + RX_MODE) & 0x40) == 0) {
-		ushort status = inw(ioaddr + DATAPORT);
-		ushort pkt_len = inw(ioaddr + DATAPORT);
-
-		if (net_debug > 4)
-			printk("%s: Rxing packet mode %02x status %04x.\n",
-				   dev->name, inb(ioaddr + RX_MODE), status);
-#ifndef final_version
-		if (status == 0) {
-			outb(0x05, ioaddr + RX_CTRL);
-			break;
-		}
-#endif
-
-		if ((status & 0xF0) != 0x20) {	/* There was an error. */
-			dev->stats.rx_errors++;
-			if (status & 0x08) dev->stats.rx_length_errors++;
-			if (status & 0x04) dev->stats.rx_frame_errors++;
-			if (status & 0x02) dev->stats.rx_crc_errors++;
-			if (status & 0x01) dev->stats.rx_over_errors++;
-		} else {
-			/* Malloc up new buffer. */
-			struct sk_buff *skb;
-
-			if (pkt_len > 1550) {
-				printk("%s: The AT1700 claimed a very large packet, size %d.\n",
-					   dev->name, pkt_len);
-				/* Prime the FIFO and then flush the packet. */
-				inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT);
-				outb(0x05, ioaddr + RX_CTRL);
-				dev->stats.rx_errors++;
-				break;
-			}
-			skb = dev_alloc_skb(pkt_len+3);
-			if (skb == NULL) {
-				printk("%s: Memory squeeze, dropping packet (len %d).\n",
-					   dev->name, pkt_len);
-				/* Prime the FIFO and then flush the packet. */
-				inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT);
-				outb(0x05, ioaddr + RX_CTRL);
-				dev->stats.rx_dropped++;
-				break;
-			}
-			skb_reserve(skb,2);
-
-			insw(ioaddr + DATAPORT, skb_put(skb,pkt_len), (pkt_len + 1) >> 1);
-			skb->protocol=eth_type_trans(skb, dev);
-			netif_rx(skb);
-			dev->stats.rx_packets++;
-			dev->stats.rx_bytes += pkt_len;
-		}
-		if (--boguscount <= 0)
-			break;
-	}
-
-	/* If any worth-while packets have been received, dev_rint()
-	   has done a mark_bh(NET_BH) for us and will work on them
-	   when we get to the bottom-half routine. */
-	{
-		int i;
-		for (i = 0; i < 20; i++) {
-			if ((inb(ioaddr + RX_MODE) & 0x40) == 0x40)
-				break;
-			inw(ioaddr + DATAPORT);				/* dummy status read */
-			outb(0x05, ioaddr + RX_CTRL);
-		}
-
-		if (net_debug > 5)
-			printk("%s: Exint Rx packet with mode %02x after %d ticks.\n",
-				   dev->name, inb(ioaddr + RX_MODE), i);
-	}
-}
-
-/* The inverse routine to net_open(). */
-static int net_close(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-
-	netif_stop_queue(dev);
-
-	/* Set configuration register 0 to disable Tx and Rx. */
-	outb(0xda, ioaddr + CONFIG_0);
-
-	/* No statistic counters on the chip to update. */
-
-	/* Disable the IRQ on boards of fmv18x where it is feasible. */
-	if (lp->jumpered)
-		outb(0x00, ioaddr + IOCONFIG1);
-
-	/* Power-down the chip.  Green, green, green! */
-	outb(0x00, ioaddr + CONFIG_1);
-	return 0;
-}
-
-/*
-  Set the multicast/promiscuous mode for this adaptor.
-*/
-
-static void
-set_rx_mode(struct net_device *dev)
-{
-	int ioaddr = dev->base_addr;
-	struct net_local *lp = netdev_priv(dev);
-	unsigned char mc_filter[8];		 /* Multicast hash filter */
-	unsigned long flags;
-
-	if (dev->flags & IFF_PROMISC) {
-		memset(mc_filter, 0xff, sizeof(mc_filter));
-		outb(3, ioaddr + RX_MODE);	/* Enable promiscuous mode */
-	} else if (netdev_mc_count(dev) > MC_FILTERBREAK ||
-			   (dev->flags & IFF_ALLMULTI)) {
-		/* Too many to filter perfectly -- accept all multicasts. */
-		memset(mc_filter, 0xff, sizeof(mc_filter));
-		outb(2, ioaddr + RX_MODE);	/* Use normal mode. */
-	} else if (netdev_mc_empty(dev)) {
-		memset(mc_filter, 0x00, sizeof(mc_filter));
-		outb(1, ioaddr + RX_MODE);	/* Ignore almost all multicasts. */
-	} else {
-		struct netdev_hw_addr *ha;
-
-		memset(mc_filter, 0, sizeof(mc_filter));
-		netdev_for_each_mc_addr(ha, dev) {
-			unsigned int bit =
-				ether_crc_le(ETH_ALEN, ha->addr) >> 26;
-			mc_filter[bit >> 3] |= (1 << bit);
-		}
-		outb(0x02, ioaddr + RX_MODE);	/* Use normal mode. */
-	}
-
-	spin_lock_irqsave (&lp->lock, flags);
-	if (memcmp(mc_filter, lp->mc_filter, sizeof(mc_filter))) {
-		int i;
-		int saved_bank = inw(ioaddr + CONFIG_0);
-		/* Switch to bank 1 and set the multicast table. */
-		outw((saved_bank & ~0x0C00) | 0x0480, ioaddr + CONFIG_0);
-		for (i = 0; i < 8; i++)
-			outb(mc_filter[i], ioaddr + PORT_OFFSET(8 + i));
-		memcpy(lp->mc_filter, mc_filter, sizeof(mc_filter));
-		outw(saved_bank, ioaddr + CONFIG_0);
-	}
-	spin_unlock_irqrestore (&lp->lock, flags);
-}
-
-#ifdef MODULE
-static struct net_device *dev_at1700;
-
-module_param(io, int, 0);
-module_param(irq, int, 0);
-module_param(net_debug, int, 0);
-MODULE_PARM_DESC(io, "AT1700/FMV18X I/O base address");
-MODULE_PARM_DESC(irq, "AT1700/FMV18X IRQ number");
-MODULE_PARM_DESC(net_debug, "AT1700/FMV18X debug level (0-6)");
-
-static int __init at1700_module_init(void)
-{
-	if (io == 0)
-		printk("at1700: You should not use auto-probing with insmod!\n");
-	dev_at1700 = at1700_probe(-1);
-	if (IS_ERR(dev_at1700))
-		return PTR_ERR(dev_at1700);
-	return 0;
-}
-
-static void __exit at1700_module_exit(void)
-{
-	unregister_netdev(dev_at1700);
-	cleanup_card(dev_at1700);
-	free_netdev(dev_at1700);
-}
-module_init(at1700_module_init);
-module_exit(at1700_module_exit);
-#endif /* MODULE */
-MODULE_LICENSE("GPL");