Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

10 files changed, 5337 insertions, 0 deletions

diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
new file mode 100644
index 00000000000..470364deded
--- /dev/null
+++ b/drivers/net/arm/Kconfig
@@ -0,0 +1,46 @@
+#
+# Acorn Network device configuration
+#  These are for Acorn's Expansion card network interfaces
+#
+config ARM_AM79C961A
+	bool "ARM EBSA110 AM79C961A support"
+	depends on NET_ETHERNET && ARM && ARCH_EBSA110
+	select CRC32
+	help
+	  If you wish to compile a kernel for the EBSA-110, then you should
+	  always answer Y to this.
+
+config ARM_ETHER1
+	tristate "Acorn Ether1 support"
+	depends on NET_ETHERNET && ARM && ARCH_ACORN
+	help
+	  If you have an Acorn system with one of these (AKA25) network cards,
+	  you should say Y to this option if you wish to use it with Linux.
+
+config ARM_ETHER3
+	tristate "Acorn/ANT Ether3 support"
+	depends on NET_ETHERNET && ARM && ARCH_ACORN
+	help
+	  If you have an Acorn system with one of these network cards, you
+	  should say Y to this option if you wish to use it with Linux.
+
+config ARM_ETHERH
+	tristate "I-cubed EtherH/ANT EtherM support"
+	depends on NET_ETHERNET && ARM && ARCH_ACORN
+	select CRC32
+	help
+	  If you have an Acorn system with one of these network cards, you
+	  should say Y to this option if you wish to use it with Linux.
+
+config ARM_ETHER00
+	tristate "Altera Ether00 support"
+	depends on NET_ETHERNET && ARM && ARCH_CAMELOT
+	help
+	  This is the driver for Altera's ether00 ethernet mac IP core. Say
+	  Y here if you want to build support for this into the kernel. It
+	  is also available as a module (say M here) that can be inserted/
+	  removed from the kernel at the same time as the PLD is configured.
+	  If this driver is running on an epxa10 development board then it
+	  will generate a suitable hw address based on the board serial
+	  number (MTD support is required for this). Otherwise you will
+	  need to set a suitable hw address using ifconfig.
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
new file mode 100644
index 00000000000..b0d706834d8
--- /dev/null
+++ b/drivers/net/arm/Makefile
@@ -0,0 +1,10 @@
+# File: drivers/net/arm/Makefile
+#
+# Makefile for the ARM network device drivers
+#
+
+obj-$(CONFIG_ARM_AM79C961A)	+= am79c961a.o
+obj-$(CONFIG_ARM_ETHER00)	+= ether00.o
+obj-$(CONFIG_ARM_ETHERH)	+= etherh.o
+obj-$(CONFIG_ARM_ETHER3)	+= ether3.o
+obj-$(CONFIG_ARM_ETHER1)	+= ether1.o
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
new file mode 100644
index 00000000000..9b659e3c8d6
--- /dev/null
+++ b/drivers/net/arm/am79c961a.c
@@ -0,0 +1,750 @@
+/*
+ *  linux/drivers/net/am79c961.c
+ *
+ *  by Russell King <rmk@arm.linux.org.uk> 1995-2001.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from various things including skeleton.c
+ *
+ * This is a special driver for the am79c961A Lance chip used in the
+ * Intel (formally Digital Equipment Corp) EBSA110 platform.  Please
+ * note that this can not be built as a module (it doesn't make sense).
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#define TX_BUFFERS 15
+#define RX_BUFFERS 25
+
+#include "am79c961a.h"
+
+static irqreturn_t
+am79c961_interrupt (int irq, void *dev_id, struct pt_regs *regs);
+
+static unsigned int net_debug = NET_DEBUG;
+
+static const char version[] =
+	"am79c961 ethernet driver (C) 1995-2001 Russell King v0.04\n";
+
+/* --------------------------------------------------------------------------- */
+
+#ifdef __arm__
+static void write_rreg(u_long base, u_int reg, u_int val)
+{
+	__asm__(
+	"str%?h	%1, [%2]	@ NET_RAP\n\t"
+	"str%?h	%0, [%2, #-4]	@ NET_RDP"
+	:
+	: "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464));
+}
+
+static inline unsigned short read_rreg(u_long base_addr, u_int reg)
+{
+	unsigned short v;
+	__asm__(
+	"str%?h	%1, [%2]	@ NET_RAP\n\t"
+	"ldr%?h	%0, [%2, #-4]	@ NET_RDP"
+	: "=r" (v)
+	: "r" (reg), "r" (ISAIO_BASE + 0x0464));
+	return v;
+}
+
+static inline void write_ireg(u_long base, u_int reg, u_int val)
+{
+	__asm__(
+	"str%?h	%1, [%2]	@ NET_RAP\n\t"
+	"str%?h	%0, [%2, #8]	@ NET_IDP"
+	:
+	: "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464));
+}
+
+static inline unsigned short read_ireg(u_long base_addr, u_int reg)
+{
+	u_short v;
+	__asm__(
+	"str%?h	%1, [%2]	@ NAT_RAP\n\t"
+	"str%?h	%0, [%2, #8]	@ NET_IDP\n\t"
+	: "=r" (v)
+	: "r" (reg), "r" (ISAIO_BASE + 0x0464));
+	return v;
+}
+
+#define am_writeword(dev,off,val) __raw_writew(val, ISAMEM_BASE + ((off) << 1))
+#define am_readword(dev,off)      __raw_readw(ISAMEM_BASE + ((off) << 1))
+
+static inline void
+am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
+{
+	offset = ISAMEM_BASE + (offset << 1);
+	length = (length + 1) & ~1;
+	if ((int)buf & 2) {
+		__asm__ __volatile__("str%?h	%2, [%0], #4"
+		 : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
+		buf += 2;
+		length -= 2;
+	}
+	while (length > 8) {
+		unsigned int tmp, tmp2;
+		__asm__ __volatile__(
+			"ldm%?ia	%1!, {%2, %3}\n\t"
+			"str%?h	%2, [%0], #4\n\t"
+			"mov%?	%2, %2, lsr #16\n\t"
+			"str%?h	%2, [%0], #4\n\t"
+			"str%?h	%3, [%0], #4\n\t"
+			"mov%?	%3, %3, lsr #16\n\t"
+			"str%?h	%3, [%0], #4"
+		: "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2)
+		: "0" (offset), "1" (buf));
+		length -= 8;
+	}
+	while (length > 0) {
+		__asm__ __volatile__("str%?h	%2, [%0], #4"
+		 : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
+		buf += 2;
+		length -= 2;
+	}
+}
+
+static inline void
+am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
+{
+	offset = ISAMEM_BASE + (offset << 1);
+	length = (length + 1) & ~1;
+	if ((int)buf & 2) {
+		unsigned int tmp;
+		__asm__ __volatile__(
+			"ldr%?h	%2, [%0], #4\n\t"
+			"str%?b	%2, [%1], #1\n\t"
+			"mov%?	%2, %2, lsr #8\n\t"
+			"str%?b	%2, [%1], #1"
+		: "=&r" (offset), "=&r" (buf), "=r" (tmp): "0" (offset), "1" (buf));
+		length -= 2;
+	}
+	while (length > 8) {
+		unsigned int tmp, tmp2, tmp3;
+		__asm__ __volatile__(
+			"ldr%?h	%2, [%0], #4\n\t"
+			"ldr%?h	%3, [%0], #4\n\t"
+			"orr%?	%2, %2, %3, lsl #16\n\t"
+			"ldr%?h	%3, [%0], #4\n\t"
+			"ldr%?h	%4, [%0], #4\n\t"
+			"orr%?	%3, %3, %4, lsl #16\n\t"
+			"stm%?ia	%1!, {%2, %3}"
+		: "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2), "=r" (tmp3)
+		: "0" (offset), "1" (buf));
+		length -= 8;
+	}
+	while (length > 0) {
+		unsigned int tmp;
+		__asm__ __volatile__(
+			"ldr%?h	%2, [%0], #4\n\t"
+			"str%?b	%2, [%1], #1\n\t"
+			"mov%?	%2, %2, lsr #8\n\t"
+			"str%?b	%2, [%1], #1"
+		: "=&r" (offset), "=&r" (buf), "=r" (tmp) : "0" (offset), "1" (buf));
+		length -= 2;
+	}
+}
+#else
+#error Not compatible
+#endif
+
+static int
+am79c961_ramtest(struct net_device *dev, unsigned int val)
+{
+	unsigned char *buffer = kmalloc (65536, GFP_KERNEL);
+	int i, error = 0, errorcount = 0;
+
+	if (!buffer)
+		return 0;
+	memset (buffer, val, 65536);
+	am_writebuffer(dev, 0, buffer, 65536);
+	memset (buffer, val ^ 255, 65536);
+	am_readbuffer(dev, 0, buffer, 65536);
+	for (i = 0; i < 65536; i++) {
+		if (buffer[i] != val && !error) {
+			printk ("%s: buffer error (%02X %02X) %05X - ", dev->name, val, buffer[i], i);
+			error = 1;
+			errorcount ++;
+		} else if (error && buffer[i] == val) {
+			printk ("%05X\n", i);
+			error = 0;
+		}
+	}
+	if (error)
+		printk ("10000\n");
+	kfree (buffer);
+	return errorcount;
+}
+
+static void
+am79c961_init_for_open(struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	unsigned long flags;
+	unsigned char *p;
+	u_int hdr_addr, first_free_addr;
+	int i;
+
+	/*
+	 * Stop the chip.
+	 */
+	spin_lock_irqsave(priv->chip_lock, flags);
+	write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP);
+	spin_unlock_irqrestore(priv->chip_lock, flags);
+
+	write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */
+	write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */
+	write_ireg (dev->base_addr, 7, 0x0090); /* XMIT LED */
+	write_ireg (dev->base_addr, 2, 0x0000); /* MODE register selects media */
+
+	for (i = LADRL; i <= LADRH; i++)
+		write_rreg (dev->base_addr, i, 0);
+
+	for (i = PADRL, p = dev->dev_addr; i <= PADRH; i++, p += 2)
+		write_rreg (dev->base_addr, i, p[0] | (p[1] << 8));
+
+	i = MODE_PORT_10BT;
+	if (dev->flags & IFF_PROMISC)
+		i |= MODE_PROMISC;
+
+	write_rreg (dev->base_addr, MODE, i);
+	write_rreg (dev->base_addr, POLLINT, 0);
+	write_rreg (dev->base_addr, SIZERXR, -RX_BUFFERS);
+	write_rreg (dev->base_addr, SIZETXR, -TX_BUFFERS);
+
+	first_free_addr = RX_BUFFERS * 8 + TX_BUFFERS * 8 + 16;
+	hdr_addr = 0;
+
+	priv->rxhead = 0;
+	priv->rxtail = 0;
+	priv->rxhdr = hdr_addr;
+
+	for (i = 0; i < RX_BUFFERS; i++) {
+		priv->rxbuffer[i] = first_free_addr;
+		am_writeword (dev, hdr_addr, first_free_addr);
+		am_writeword (dev, hdr_addr + 2, RMD_OWN);
+		am_writeword (dev, hdr_addr + 4, (-1600));
+		am_writeword (dev, hdr_addr + 6, 0);
+		first_free_addr += 1600;
+		hdr_addr += 8;
+	}
+	priv->txhead = 0;
+	priv->txtail = 0;
+	priv->txhdr = hdr_addr;
+	for (i = 0; i < TX_BUFFERS; i++) {
+		priv->txbuffer[i] = first_free_addr;
+		am_writeword (dev, hdr_addr, first_free_addr);
+		am_writeword (dev, hdr_addr + 2, TMD_STP|TMD_ENP);
+		am_writeword (dev, hdr_addr + 4, 0xf000);
+		am_writeword (dev, hdr_addr + 6, 0);
+		first_free_addr += 1600;
+		hdr_addr += 8;
+	}
+
+	write_rreg (dev->base_addr, BASERXL, priv->rxhdr);
+	write_rreg (dev->base_addr, BASERXH, 0);
+	write_rreg (dev->base_addr, BASETXL, priv->txhdr);
+	write_rreg (dev->base_addr, BASERXH, 0);
+	write_rreg (dev->base_addr, CSR0, CSR0_STOP);
+	write_rreg (dev->base_addr, CSR3, CSR3_IDONM|CSR3_BABLM|CSR3_DXSUFLO);
+	write_rreg (dev->base_addr, CSR4, CSR4_APAD_XMIT|CSR4_MFCOM|CSR4_RCVCCOM|CSR4_TXSTRTM|CSR4_JABM);
+	write_rreg (dev->base_addr, CSR0, CSR0_IENA|CSR0_STRT);
+}
+
+static void am79c961_timer(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct dev_priv *priv = netdev_priv(dev);
+	unsigned int lnkstat, carrier;
+
+	lnkstat = read_ireg(dev->base_addr, ISALED0) & ISALED0_LNKST;
+	carrier = netif_carrier_ok(dev);
+
+	if (lnkstat && !carrier)
+		netif_carrier_on(dev);
+	else if (!lnkstat && carrier)
+		netif_carrier_off(dev);
+
+	mod_timer(&priv->timer, jiffies + 5*HZ);
+}
+
+/*
+ * Open/initialize the board.
+ */
+static int
+am79c961_open(struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	int ret;
+
+	memset (&priv->stats, 0, sizeof (priv->stats));
+
+	ret = request_irq(dev->irq, am79c961_interrupt, 0, dev->name, dev);
+	if (ret)
+		return ret;
+
+	am79c961_init_for_open(dev);
+
+	netif_carrier_off(dev);
+
+	priv->timer.expires = jiffies;
+	add_timer(&priv->timer);
+
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+/*
+ * The inverse routine to am79c961_open().
+ */
+static int
+am79c961_close(struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	del_timer_sync(&priv->timer);
+
+	netif_stop_queue(dev);
+	netif_carrier_off(dev);
+
+	spin_lock_irqsave(priv->chip_lock, flags);
+	write_rreg (dev->base_addr, CSR0, CSR0_STOP);
+	write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
+	spin_unlock_irqrestore(priv->chip_lock, flags);
+
+	free_irq (dev->irq, dev);
+
+	return 0;
+}
+
+/*
+ * Get the current statistics.
+ */
+static struct net_device_stats *am79c961_getstats (struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	return &priv->stats;
+}
+
+static void am79c961_mc_hash(struct dev_mc_list *dmi, unsigned short *hash)
+{
+	if (dmi->dmi_addrlen == ETH_ALEN && dmi->dmi_addr[0] & 0x01) {
+		int idx, bit;
+		u32 crc;
+
+		crc = ether_crc_le(ETH_ALEN, dmi->dmi_addr);
+
+		idx = crc >> 30;
+		bit = (crc >> 26) & 15;
+
+		hash[idx] |= 1 << bit;
+	}
+}
+
+/*
+ * Set or clear promiscuous/multicast mode filter for this adapter.
+ */
+static void am79c961_setmulticastlist (struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	unsigned long flags;
+	unsigned short multi_hash[4], mode;
+	int i, stopped;
+
+	mode = MODE_PORT_10BT;
+
+	if (dev->flags & IFF_PROMISC) {
+		mode |= MODE_PROMISC;
+	} else if (dev->flags & IFF_ALLMULTI) {
+		memset(multi_hash, 0xff, sizeof(multi_hash));
+	} else {
+		struct dev_mc_list *dmi;
+
+		memset(multi_hash, 0x00, sizeof(multi_hash));
+
+		for (dmi = dev->mc_list; dmi; dmi = dmi->next)
+			am79c961_mc_hash(dmi, multi_hash);
+	}
+
+	spin_lock_irqsave(priv->chip_lock, flags);
+
+	stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP;
+
+	if (!stopped) {
+		/*
+		 * Put the chip into suspend mode
+		 */
+		write_rreg(dev->base_addr, CTRL1, CTRL1_SPND);
+
+		/*
+		 * Spin waiting for chip to report suspend mode
+		 */
+		while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) {
+			spin_unlock_irqrestore(priv->chip_lock, flags);
+			nop();
+			spin_lock_irqsave(priv->chip_lock, flags);
+		}
+	}
+
+	/*
+	 * Update the multicast hash table
+	 */
+	for (i = 0; i < sizeof(multi_hash) / sizeof(multi_hash[0]); i++)
+		write_rreg(dev->base_addr, i + LADRL, multi_hash[i]);
+
+	/*
+	 * Write the mode register
+	 */
+	write_rreg(dev->base_addr, MODE, mode);
+
+	if (!stopped) {
+		/*
+		 * Put the chip back into running mode
+		 */
+		write_rreg(dev->base_addr, CTRL1, 0);
+	}
+
+	spin_unlock_irqrestore(priv->chip_lock, flags);
+}
+
+static void am79c961_timeout(struct net_device *dev)
+{
+	printk(KERN_WARNING "%s: transmit timed out, network cable problem?\n",
+		dev->name);
+
+	/*
+	 * ought to do some setup of the tx side here
+	 */
+
+	netif_wake_queue(dev);
+}
+
+/*
+ * Transmit a packet
+ */
+static int
+am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	unsigned int hdraddr, bufaddr;
+	unsigned int head;
+	unsigned long flags;
+
+	head = priv->txhead;
+	hdraddr = priv->txhdr + (head << 3);
+	bufaddr = priv->txbuffer[head];
+	head += 1;
+	if (head >= TX_BUFFERS)
+		head = 0;
+
+	am_writebuffer (dev, bufaddr, skb->data, skb->len);
+	am_writeword (dev, hdraddr + 4, -skb->len);
+	am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP);
+	priv->txhead = head;
+
+	spin_lock_irqsave(priv->chip_lock, flags);
+	write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA);
+	dev->trans_start = jiffies;
+	spin_unlock_irqrestore(priv->chip_lock, flags);
+
+	/*
+	 * If the next packet is owned by the ethernet device,
+	 * then the tx ring is full and we can't add another
+	 * packet.
+	 */
+	if (am_readword(dev, priv->txhdr + (priv->txhead << 3) + 2) & TMD_OWN)
+		netif_stop_queue(dev);
+
+	dev_kfree_skb(skb);
+
+	return 0;
+}
+
+/*
+ * If we have a good packet(s), get it/them out of the buffers.
+ */
+static void
+am79c961_rx(struct net_device *dev, struct dev_priv *priv)
+{
+	do {
+		struct sk_buff *skb;
+		u_int hdraddr;
+		u_int pktaddr;
+		u_int status;
+		int len;
+
+		hdraddr = priv->rxhdr + (priv->rxtail << 3);
+		pktaddr = priv->rxbuffer[priv->rxtail];
+
+		status = am_readword (dev, hdraddr + 2);
+		if (status & RMD_OWN) /* do we own it? */
+			break;
+
+		priv->rxtail ++;
+		if (priv->rxtail >= RX_BUFFERS)
+			priv->rxtail = 0;
+
+		if ((status & (RMD_ERR|RMD_STP|RMD_ENP)) != (RMD_STP|RMD_ENP)) {
+			am_writeword (dev, hdraddr + 2, RMD_OWN);
+			priv->stats.rx_errors ++;
+			if (status & RMD_ERR) {
+				if (status & RMD_FRAM)
+					priv->stats.rx_frame_errors ++;
+				if (status & RMD_CRC)
+					priv->stats.rx_crc_errors ++;
+			} else if (status & RMD_STP)
+				priv->stats.rx_length_errors ++;
+			continue;
+		}
+
+		len = am_readword(dev, hdraddr + 6);
+		skb = dev_alloc_skb(len + 2);
+
+		if (skb) {
+			skb->dev = dev;
+			skb_reserve(skb, 2);
+
+			am_readbuffer(dev, pktaddr, skb_put(skb, len), len);
+			am_writeword(dev, hdraddr + 2, RMD_OWN);
+			skb->protocol = eth_type_trans(skb, dev);
+			netif_rx(skb);
+			dev->last_rx = jiffies;
+			priv->stats.rx_bytes += len;
+			priv->stats.rx_packets ++;
+		} else {
+			am_writeword (dev, hdraddr + 2, RMD_OWN);
+			printk (KERN_WARNING "%s: memory squeeze, dropping packet.\n", dev->name);
+			priv->stats.rx_dropped ++;
+			break;
+		}
+	} while (1);
+}
+
+/*
+ * Update stats for the transmitted packet
+ */
+static void
+am79c961_tx(struct net_device *dev, struct dev_priv *priv)
+{
+	do {
+		short len;
+		u_int hdraddr;
+		u_int status;
+
+		hdraddr = priv->txhdr + (priv->txtail << 3);
+		status = am_readword (dev, hdraddr + 2);
+		if (status & TMD_OWN)
+			break;
+
+		priv->txtail ++;
+		if (priv->txtail >= TX_BUFFERS)
+			priv->txtail = 0;
+
+		if (status & TMD_ERR) {
+			u_int status2;
+
+			priv->stats.tx_errors ++;
+
+			status2 = am_readword (dev, hdraddr + 6);
+
+			/*
+			 * Clear the error byte
+			 */
+			am_writeword (dev, hdraddr + 6, 0);
+
+			if (status2 & TST_RTRY)
+				priv->stats.collisions += 16;
+			if (status2 & TST_LCOL)
+				priv->stats.tx_window_errors ++;
+			if (status2 & TST_LCAR)
+				priv->stats.tx_carrier_errors ++;
+			if (status2 & TST_UFLO)
+				priv->stats.tx_fifo_errors ++;
+			continue;
+		}
+		priv->stats.tx_packets ++;
+		len = am_readword (dev, hdraddr + 4);
+		priv->stats.tx_bytes += -len;
+	} while (priv->txtail != priv->txhead);
+
+	netif_wake_queue(dev);
+}
+
+static irqreturn_t
+am79c961_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct net_device *dev = (struct net_device *)dev_id;
+	struct dev_priv *priv = netdev_priv(dev);
+	u_int status, n = 100;
+	int handled = 0;
+
+	do {
+		status = read_rreg(dev->base_addr, CSR0);
+		write_rreg(dev->base_addr, CSR0, status &
+			   (CSR0_IENA|CSR0_TINT|CSR0_RINT|
+			    CSR0_MERR|CSR0_MISS|CSR0_CERR|CSR0_BABL));
+
+		if (status & CSR0_RINT) {
+			handled = 1;
+			am79c961_rx(dev, priv);
+		}
+		if (status & CSR0_TINT) {
+			handled = 1;
+			am79c961_tx(dev, priv);
+		}
+		if (status & CSR0_MISS) {
+			handled = 1;
+			priv->stats.rx_dropped ++;
+		}
+		if (status & CSR0_CERR) {
+			handled = 1;
+			mod_timer(&priv->timer, jiffies);
+		}
+	} while (--n && status & (CSR0_RINT | CSR0_TINT));
+
+	return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void am79c961_poll_controller(struct net_device *dev)
+{
+	unsigned long flags;
+	local_irq_save(flags);
+	am79c961_interrupt(dev->irq, dev, NULL);
+	local_irq_restore(flags);
+}
+#endif
+
+/*
+ * Initialise the chip.  Note that we always expect
+ * to be entered with interrupts enabled.
+ */
+static int
+am79c961_hw_init(struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+
+	spin_lock_irq(&priv->chip_lock);
+	write_rreg (dev->base_addr, CSR0, CSR0_STOP);
+	write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
+	spin_unlock_irq(&priv->chip_lock);
+
+	am79c961_ramtest(dev, 0x66);
+	am79c961_ramtest(dev, 0x99);
+
+	return 0;
+}
+
+static void __init am79c961_banner(void)
+{
+	static unsigned version_printed;
+
+	if (net_debug && version_printed++ == 0)
+		printk(KERN_INFO "%s", version);
+}
+
+static int __init am79c961_init(void)
+{
+	struct net_device *dev;
+	struct dev_priv *priv;
+	int i, ret;
+
+	dev = alloc_etherdev(sizeof(struct dev_priv));
+	ret = -ENOMEM;
+	if (!dev)
+		goto out;
+
+	priv = netdev_priv(dev);
+
+	/*
+	 * Fixed address and IRQ lines here.
+	 * The PNP initialisation should have been
+	 * done by the ether bootp loader.
+	 */
+	dev->base_addr = 0x220;
+	dev->irq = IRQ_EBSA110_ETHERNET;
+
+    	ret = -ENODEV;
+	if (!request_region(dev->base_addr, 0x18, dev->name))
+		goto nodev;
+
+	/*
+	 * Reset the device.
+	 */
+	inb(dev->base_addr + NET_RESET);
+	udelay(5);
+
+	/*
+	 * Check the manufacturer part of the
+	 * ether address.
+	 */
+	if (inb(dev->base_addr) != 0x08 ||
+	    inb(dev->base_addr + 2) != 0x00 ||
+	    inb(dev->base_addr + 4) != 0x2b)
+	    	goto release;
+
+	am79c961_banner();
+	printk(KERN_INFO "%s: ether address ", dev->name);
+
+	/* Retrive and print the ethernet address. */
+	for (i = 0; i < 6; i++) {
+		dev->dev_addr[i] = inb(dev->base_addr + i * 2) & 0xff;
+		printk (i == 5 ? "%02x\n" : "%02x:", dev->dev_addr[i]);
+	}
+
+	spin_lock_init(&priv->chip_lock);
+	init_timer(&priv->timer);
+	priv->timer.data = (unsigned long)dev;
+	priv->timer.function = am79c961_timer;
+
+	if (am79c961_hw_init(dev))
+		goto release;
+
+	dev->open		= am79c961_open;
+	dev->stop		= am79c961_close;
+	dev->hard_start_xmit	= am79c961_sendpacket;
+	dev->get_stats		= am79c961_getstats;
+	dev->set_multicast_list	= am79c961_setmulticastlist;
+	dev->tx_timeout		= am79c961_timeout;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller	= am79c961_poll_controller;
+#endif
+
+	ret = register_netdev(dev);
+	if (ret == 0)
+		return 0;
+
+release:
+	release_region(dev->base_addr, 0x18);
+nodev:
+	free_netdev(dev);
+out:
+	return ret;
+}
+
+__initcall(am79c961_init);
diff --git a/drivers/net/arm/am79c961a.h b/drivers/net/arm/am79c961a.h
new file mode 100644
index 00000000000..1e9b05050cb
--- /dev/null
+++ b/drivers/net/arm/am79c961a.h
@@ -0,0 +1,148 @@
+/*
+ * linux/drivers/net/am79c961.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_am79c961a_H
+#define _LINUX_am79c961a_H
+
+/* use 0 for production, 1 for verification, >2 for debug. debug flags: */
+#define DEBUG_TX	 2
+#define DEBUG_RX	 4
+#define DEBUG_INT	 8
+#define DEBUG_IC	16
+#ifndef NET_DEBUG
+#define NET_DEBUG 	0
+#endif
+
+#define NET_UID		0
+#define NET_RDP		0x10
+#define NET_RAP		0x12
+#define NET_RESET	0x14
+#define NET_IDP		0x16
+
+/*
+ * RAP registers
+ */
+#define CSR0		0
+#define CSR0_INIT	0x0001
+#define CSR0_STRT	0x0002
+#define CSR0_STOP	0x0004
+#define CSR0_TDMD	0x0008
+#define CSR0_TXON	0x0010
+#define CSR0_RXON	0x0020
+#define CSR0_IENA	0x0040
+#define CSR0_INTR	0x0080
+#define CSR0_IDON	0x0100
+#define CSR0_TINT	0x0200
+#define CSR0_RINT	0x0400
+#define CSR0_MERR	0x0800
+#define CSR0_MISS	0x1000
+#define CSR0_CERR	0x2000
+#define CSR0_BABL	0x4000
+#define CSR0_ERR	0x8000
+
+#define CSR3		3
+#define CSR3_EMBA	0x0008
+#define CSR3_DXMT2PD	0x0010
+#define CSR3_LAPPEN	0x0020
+#define CSR3_DXSUFLO	0x0040
+#define CSR3_IDONM	0x0100
+#define CSR3_TINTM	0x0200
+#define CSR3_RINTM	0x0400
+#define CSR3_MERRM	0x0800
+#define CSR3_MISSM	0x1000
+#define CSR3_BABLM	0x4000
+#define CSR3_MASKALL	0x5F00
+
+#define CSR4		4
+#define CSR4_JABM	0x0001
+#define CSR4_JAB	0x0002
+#define CSR4_TXSTRTM	0x0004
+#define CSR4_TXSTRT	0x0008
+#define CSR4_RCVCCOM	0x0010
+#define CSR4_RCVCCO	0x0020
+#define CSR4_MFCOM	0x0100
+#define CSR4_MFCO	0x0200
+#define CSR4_ASTRP_RCV	0x0400
+#define CSR4_APAD_XMIT	0x0800
+
+#define CTRL1		5
+#define CTRL1_SPND	0x0001
+
+#define LADRL		8
+#define LADRM1		9
+#define LADRM2		10
+#define LADRH		11
+#define PADRL		12
+#define PADRM		13
+#define PADRH		14
+
+#define MODE		15
+#define MODE_DISRX	0x0001
+#define MODE_DISTX	0x0002
+#define MODE_LOOP	0x0004
+#define MODE_DTCRC	0x0008
+#define MODE_COLL	0x0010
+#define MODE_DRETRY	0x0020
+#define MODE_INTLOOP	0x0040
+#define MODE_PORT_AUI	0x0000
+#define MODE_PORT_10BT	0x0080
+#define MODE_DRXPA	0x2000
+#define MODE_DRXBA	0x4000
+#define MODE_PROMISC	0x8000
+
+#define BASERXL		24
+#define BASERXH		25
+#define BASETXL		30
+#define BASETXH		31
+
+#define POLLINT		47
+
+#define SIZERXR		76
+#define SIZETXR		78
+
+#define CSR_MFC		112
+
+#define RMD_ENP		0x0100
+#define RMD_STP		0x0200
+#define RMD_CRC		0x0800
+#define RMD_FRAM	0x2000
+#define RMD_ERR		0x4000
+#define RMD_OWN		0x8000
+
+#define TMD_ENP		0x0100
+#define TMD_STP		0x0200
+#define TMD_MORE	0x1000
+#define TMD_ERR		0x4000
+#define TMD_OWN		0x8000
+
+#define TST_RTRY	0x0400
+#define TST_LCAR	0x0800
+#define TST_LCOL	0x1000
+#define TST_UFLO	0x4000
+#define TST_BUFF	0x8000
+
+#define ISALED0		0x0004
+#define ISALED0_LNKST	0x8000
+
+struct dev_priv {
+    struct net_device_stats stats;
+    unsigned long	rxbuffer[RX_BUFFERS];
+    unsigned long	txbuffer[TX_BUFFERS];
+    unsigned char	txhead;
+    unsigned char	txtail;
+    unsigned char	rxhead;
+    unsigned char	rxtail;
+    unsigned long	rxhdr;
+    unsigned long	txhdr;
+    spinlock_t		chip_lock;
+    struct timer_list	timer;
+};
+
+extern int	am79c961_probe (struct net_device *dev);
+
+#endif
diff --git a/drivers/net/arm/ether00.c b/drivers/net/arm/ether00.c
new file mode 100644
index 00000000000..4f1f4e31bda
--- /dev/null
+++ b/drivers/net/arm/ether00.c
@@ -0,0 +1,1017 @@
+/*
+ *  drivers/net/ether00.c
+ *
+ *  Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/* includes */
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/etherdevice.h>
+#include <linux/module.h>
+#include <linux/tqueue.h>
+#include <linux/mtd/mtd.h>
+#include <linux/pld/pld_hotswap.h>
+#include <asm/arch/excalibur.h>
+#include <asm/arch/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/sizes.h>
+
+#include <asm/arch/ether00.h>
+#include <asm/arch/tdkphy.h>
+
+
+MODULE_AUTHOR("Clive Davies");
+MODULE_DESCRIPTION("Altera Ether00 IP core driver");
+MODULE_LICENSE("GPL");
+
+#define PKT_BUF_SZ 1540 /* Size of each rx buffer */
+#define ETH_NR 4 /* Number of MACs this driver supports */
+
+#define DEBUG(x)
+
+#define __dma_va(x) (unsigned int)((unsigned int)priv->dma_data+(((unsigned int)(x))&(EXC_SPSRAM_BLOCK0_SIZE-1)))
+#define __dma_pa(x) (unsigned int)(EXC_SPSRAM_BLOCK0_BASE+(((unsigned int)(x))-(unsigned int)priv->dma_data))
+
+#define ETHER00_BASE	0
+#define	ETHER00_TYPE
+#define ETHER00_NAME "ether00"
+#define MAC_REG_SIZE 0x400 /* size of MAC register area */
+
+
+
+/* typedefs */
+
+/* The definition of the driver control structure */
+
+#define RX_NUM_BUFF     10
+#define RX_NUM_FDESC    10
+#define TX_NUM_FDESC    10
+
+struct tx_fda_ent{
+	FDA_DESC  fd;
+	BUF_DESC  bd;
+	BUF_DESC  pad;
+};
+struct rx_fda_ent{
+	FDA_DESC  fd;
+	BUF_DESC  bd;
+	BUF_DESC  pad;
+};
+struct rx_blist_ent{
+	FDA_DESC  fd;
+	BUF_DESC  bd;
+	BUF_DESC  pad;
+};
+struct net_priv
+{
+	struct net_device_stats stats;
+	struct sk_buff* skb;
+	void* dma_data;
+	struct rx_blist_ent*  rx_blist_vp;
+	struct rx_fda_ent* rx_fda_ptr;
+	struct tx_fda_ent* tx_fdalist_vp;
+	struct tq_struct  tq_memupdate;
+	unsigned char   memupdate_scheduled;
+	unsigned char   rx_disabled;
+	unsigned char   queue_stopped;
+	spinlock_t rx_lock;
+};
+
+static const char vendor_id[2]={0x07,0xed};
+
+#ifdef ETHER00_DEBUG
+
+/* Dump (most) registers for debugging puposes */
+
+static void dump_regs(struct net_device *dev){
+	struct net_priv* priv=dev->priv;
+	unsigned int* i;
+
+	printk("\n RX free descriptor area:\n");
+
+	for(i=(unsigned int*)priv->rx_fda_ptr;
+	    i<((unsigned int*)(priv->rx_fda_ptr+RX_NUM_FDESC));){
+		printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3));
+		i+=4;
+	}
+
+	printk("\n RX buffer list:\n");
+
+	for(i=(unsigned int*)priv->rx_blist_vp;
+	    i<((unsigned int*)(priv->rx_blist_vp+RX_NUM_BUFF));){
+		printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3));
+		i+=4;
+	}
+
+	printk("\n TX frame descriptor list:\n");
+
+	for(i=(unsigned int*)priv->tx_fdalist_vp;
+	    i<((unsigned int*)(priv->tx_fdalist_vp+TX_NUM_FDESC));){
+		printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3));
+		i+=4;
+	}
+
+	printk("\ndma ctl=%#x\n",readw(ETHER_DMA_CTL(dev->base_addr)));
+	printk("txfrmptr=%#x\n",readw(ETHER_TXFRMPTR(dev->base_addr)));
+	printk("txthrsh=%#x\n",readw(ETHER_TXTHRSH(dev->base_addr)));
+	printk("txpollctr=%#x\n",readw(ETHER_TXPOLLCTR(dev->base_addr)));
+	printk("blfrmptr=%#x\n",readw(ETHER_BLFRMPTR(dev->base_addr)));
+	printk("rxfragsize=%#x\n",readw(ETHER_RXFRAGSIZE(dev->base_addr)));
+	printk("tx_int_en=%#x\n",readw(ETHER_INT_EN(dev->base_addr)));