Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits)
  phy/marvell: add 88ec048 support
  igb: Program MDICNFG register prior to PHY init
  e1000e: correct MAC-PHY interconnect register offset for 82579
  hso: Add new product ID
  can: Add driver for esd CAN-USB/2 device
  l2tp: fix export of header file for userspace
  can-raw: Fix skb_orphan_try handling
  Revert "net: remove zap_completion_queue"
  net: cleanup inclusion
  phy/marvell: add 88e1121 interface mode support
  u32: negative offset fix
  net: Fix a typo from "dev" to "ndev"
  igb: Use irq_synchronize per vector when using MSI-X
  ixgbevf: fix null pointer dereference due to filter being set for VLAN 0
  e1000e: Fix irq_synchronize in MSI-X case
  e1000e: register pm_qos request on hardware activation
  ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice
  net: Add getsockopt support for TCP thin-streams
  cxgb4: update driver version
  cxgb4: add new PCI IDs
  ...

Manually fix up conflicts in:
 - drivers/net/e1000e/netdev.c: due to pm_qos registration
   infrastructure changes
 - drivers/net/phy/marvell.c: conflict between adding 88ec048 support
   and cleaning up the IDs
 - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req
   conflict (registration change vs marking it static)

1 files changed, 34 insertions, 9 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ce2fcdd4ab9..ebe68395ecf 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -530,14 +530,15 @@ config SH_ETH
 	depends on SUPERH && \
 		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \
 		 CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \
-		 CPU_SUBTYPE_SH7724)
+		 CPU_SUBTYPE_SH7724 || CPU_SUBTYPE_SH7757)
 	select CRC32
 	select MII
 	select MDIO_BITBANG
 	select PHYLIB
 	help
 	  Renesas SuperH Ethernet device driver.
-	  This driver support SH7710, SH7712, SH7763, SH7619, and SH7724.
+	  This driver supporting CPUs are:
+		- SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757.
 
 config SUNLANCE
 	tristate "Sun LANCE support"
@@ -1463,7 +1464,7 @@ config FORCEDETH
 config CS89x0
 	tristate "CS89x0 support"
 	depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
-		|| ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS)
+		|| ARCH_IXDP2X01 || MACH_MX31ADS)
 	---help---
 	  Support for CS89x0 chipset based Ethernet cards. If you have a
 	  network (Ethernet) card of this type, say Y and read the
@@ -1477,7 +1478,7 @@ config CS89x0
 config CS89x0_NONISA_IRQ
 	def_bool y
 	depends on CS89x0 != n
-	depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS
+	depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS
 
 config TC35815
 	tristate "TOSHIBA TC35815 Ethernet support"
@@ -1659,6 +1660,7 @@ config R6040
 	depends on NET_PCI && PCI
 	select CRC32
 	select MII
+	select PHYLIB
 	help
 	  This is a driver for the R6040 Fast Ethernet MACs found in the
 	  the RDC R-321x System-on-chips.
@@ -1748,11 +1750,12 @@ config TLAN
 	  Please email feedback to <torben.mathiasen@compaq.com>.
 
 config KS8842
-	tristate "Micrel KSZ8842"
-	depends on HAS_IOMEM
+	tristate "Micrel KSZ8841/42 with generic bus interface"
+	depends on HAS_IOMEM && DMA_ENGINE
 	help
-	  This platform driver is for Micrel KSZ8842 / KS8842
-	  2-port ethernet switch chip (managed, VLAN, QoS).
+	 This platform driver is for KSZ8841(1-port) / KS8842(2-port)
+	 ethernet switch chip (managed, VLAN, QoS) from Micrel or
+	 Timberdale(FPGA).
 
 config KS8851
        tristate "Micrel KS8851 SPI"
@@ -2601,6 +2604,29 @@ config CHELSIO_T4
 	  To compile this driver as a module choose M here; the module
 	  will be called cxgb4.
 
+config CHELSIO_T4VF_DEPENDS
+	tristate
+	depends on PCI && INET
+	default y
+
+config CHELSIO_T4VF
+	tristate "Chelsio Communications T4 Virtual Function Ethernet support"
+	depends on CHELSIO_T4VF_DEPENDS
+	help
+	  This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
+	  adapters with PCI-E SR-IOV Virtual Functions.
+
+	  For general information about Chelsio and our products, visit
+	  our website at <http://www.chelsio.com>.
+
+	  For customer support, please visit our customer support page at
+	  <http://www.chelsio.com/support.htm>.
+
+	  Please send feedback to <linux-bugs@chelsio.com>.
+
+	  To compile this driver as a module choose M here; the module
+	  will be called cxgb4vf.
+
 config EHEA
 	tristate "eHEA Ethernet support"
 	depends on IBMEBUS && INET && SPARSEMEM
@@ -2614,7 +2640,6 @@ config EHEA
 config ENIC
 	tristate "Cisco VIC Ethernet NIC Support"
 	depends on PCI && INET
-	select INET_LRO
 	help
 	  This enables the support for the Cisco VIC Ethernet card.