[MTD] maps: Clean up trailing white spaces

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

61 files changed, 470 insertions, 470 deletions

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index e12e36a003d..48638c8097a 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -1,5 +1,5 @@
 # drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.60 2005/11/07 08:33:35 gleixner Exp $
+# $Id: Kconfig,v 1.61 2005/11/07 11:14:26 gleixner Exp $
 
 menu "Mapping drivers for chip access"
 	depends on MTD!=n
@@ -64,9 +64,9 @@ config MTD_SUN_UFLASH
 	tristate "Sun Microsystems userflash support"
 	depends on (SPARC32 || SPARC64) && MTD_CFI
 	help
-	  This provides a 'mapping' driver which supports the way in 
-	  which user-programmable flash chips are connected on various 
-	  Sun Microsystems boardsets.  This driver will require CFI support 
+	  This provides a 'mapping' driver which supports the way in
+	  which user-programmable flash chips are connected on various
+	  Sun Microsystems boardsets.  This driver will require CFI support
 	  in the kernel, so if you did not enable CFI previously, do that now.
 
 config MTD_PNC2000
@@ -89,7 +89,7 @@ config MTD_NETSC520
 	depends on X86 && MTD_CFI && MTD_PARTITIONS
 	help
 	  This enables access routines for the flash chips on the AMD NetSc520
-	  demonstration board. If you have one of these boards and would like 
+	  demonstration board. If you have one of these boards and would like
 	  to use the flash chips on it, say 'Y'.
 
 config MTD_TS5500
@@ -212,7 +212,7 @@ config MTD_NETtel
 	  Support for flash chips on NETtel/SecureEdge/SnapGear boards.
 
 config MTD_ALCHEMY
-	tristate '  AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support' 
+	tristate '  AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support'
 	depends on SOC_AU1X00
 	help
 	  Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
@@ -377,8 +377,8 @@ config MTD_CSTM_MIPS_IXX_START
 	default "0x8000000"
 	help
 	  This is the physical memory location that the MTD driver will
-	  use for the flash chips on your particular target board. 
-	  Refer to the memory map which should hopefully be in the 
+	  use for the flash chips on your particular target board.
+	  Refer to the memory map which should hopefully be in the
 	  documentation for your board.
 
 config MTD_CSTM_MIPS_IXX_LEN
@@ -386,7 +386,7 @@ config MTD_CSTM_MIPS_IXX_LEN
 	depends on MTD_CSTM_MIPS_IXX
 	default "0x4000000"
 	help
-	  This is the total length that the MTD driver will use for the 
+	  This is the total length that the MTD driver will use for the
 	  flash chips on your particular board.  Refer to the memory
 	  map which should hopefully be in the documentation for your
 	  board.
@@ -452,14 +452,14 @@ config MTD_IQ80310
 	depends on MTD_CFI && ARCH_IQ80310
 	help
 	  This enables access routines for the flash chips on the Intel XScale
-	  IQ80310 evaluation board. If you have one of these boards and would 
+	  IQ80310 evaluation board. If you have one of these boards and would
 	  like to use the flash chips on it, say 'Y'.
 
 config MTD_IXP4XX
 	tristate "CFI Flash device mapped on Intel IXP4xx based systems"
 	depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP4XX
 	help
-	  This enables MTD access to flash devices on platforms based 
+	  This enables MTD access to flash devices on platforms based
 	  on Intel's IXP4xx family of network processors such as the
 	  IXDP425 and Coyote. If you have an IXP4xx based board and
 	  would like to use the flash chips on it, say 'Y'.
@@ -468,7 +468,7 @@ config MTD_IXP2000
 	tristate "CFI Flash device mapped on Intel IXP2000 based systems"
 	depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000
 	help
-	  This enables MTD access to flash devices on platforms based 
+	  This enables MTD access to flash devices on platforms based
 	  on Intel's IXP2000 family of network processors such as the
 	  IXDP425 and Coyote. If you have an IXP2000 based board and
 	  would like to use the flash chips on it, say 'Y'.
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 81f97c60e0c..7d9e940a1dc 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -1,7 +1,7 @@
 #
 # linux/drivers/maps/Makefile
 #
-# $Id: Makefile.common,v 1.33 2005/11/07 08:33:35 gleixner Exp $
+# $Id: Makefile.common,v 1.34 2005/11/07 11:14:26 gleixner Exp $
 
 ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y)
 obj-$(CONFIG_MTD)		+= map_funcs.o
@@ -26,7 +26,7 @@ obj-$(CONFIG_MTD_MAINSTONE)	+= mainstone-flash.o
 obj-$(CONFIG_MTD_MBX860)	+= mbx860.o
 obj-$(CONFIG_MTD_CEIVA)		+= ceiva.o
 obj-$(CONFIG_MTD_OCTAGON)	+= octagon-5066.o
-obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o 
+obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o
 obj-$(CONFIG_MTD_PNC2000)	+= pnc2000.o
 obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
 obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
diff --git a/drivers/mtd/maps/alchemy-flash.c b/drivers/mtd/maps/alchemy-flash.c
index 27fd2a3c3b6..a57791a6ce4 100644
--- a/drivers/mtd/maps/alchemy-flash.c
+++ b/drivers/mtd/maps/alchemy-flash.c
@@ -1,10 +1,10 @@
 /*
  * Flash memory access on AMD Alchemy evaluation boards
- * 
- * $Id: alchemy-flash.c,v 1.1 2005/02/27 21:50:21 ppopov Exp $
+ *
+ * $Id: alchemy-flash.c,v 1.2 2005/11/07 11:14:26 gleixner Exp $
  *
  * (C) 2003, 2004 Pete Popov <ppopov@embeddedalley.com>
- * 
+ *
  */
 
 #include <linux/config.h>
@@ -22,7 +22,7 @@
 #ifdef 	DEBUG_RW
 #define	DBG(x...)	printk(x)
 #else
-#define	DBG(x...)	
+#define	DBG(x...)
 #endif
 
 #ifdef CONFIG_MIPS_PB1000
@@ -136,7 +136,7 @@ int __init alchemy_mtd_init(void)
 	int nb_parts = 0;
 	unsigned long window_addr;
 	unsigned long window_size;
-	
+
 	/* Default flash buswidth */
 	alchemy_map.bankwidth = BOARD_FLASH_WIDTH;
 
@@ -161,7 +161,7 @@ int __init alchemy_mtd_init(void)
 	 * Now let's probe for the actual flash.  Do it here since
 	 * specific machine settings might have been set above.
 	 */
-	printk(KERN_NOTICE BOARD_MAP_NAME ": probing %d-bit flash bus\n", 
+	printk(KERN_NOTICE BOARD_MAP_NAME ": probing %d-bit flash bus\n",
 			alchemy_map.bankwidth*8);
 	alchemy_map.virt = ioremap(window_addr, window_size);
 	mymtd = do_map_probe("cfi_probe", &alchemy_map);
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index e8a900a7768..60ca3be5406 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -2,7 +2,7 @@
  * amd76xrom.c
  *
  * Normal mappings of chips in physical memory
- * $Id: amd76xrom.c,v 1.20 2005/03/18 14:04:35 gleixner Exp $
+ * $Id: amd76xrom.c,v 1.21 2005/11/07 11:14:26 gleixner Exp $
  */
 
 #include <linux/module.h>
@@ -70,7 +70,7 @@ static void amd76xrom_cleanup(struct amd76xrom_window *window)
 		list_del(&map->list);
 		kfree(map);
 	}
-	if (window->rsrc.parent) 
+	if (window->rsrc.parent)
 		release_resource(&window->rsrc);
 
 	if (window->virt) {
@@ -107,7 +107,7 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
 		window->phys = 0xffff0000; /* 64KiB */
 	}
 	window->size = 0xffffffffUL - window->phys + 1UL;
-	
+
 	/*
 	 * Try to reserve the window mem region.  If this fails then
 	 * it is likely due to a fragment of the window being
@@ -138,7 +138,7 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
 	/* Enable writes through the rom window */
 	pci_read_config_byte(pdev, 0x40, &byte);
 	pci_write_config_byte(pdev, 0x40, byte | 1);
-	
+
 	/* FIXME handle registers 0x80 - 0x8C the bios region locks */
 
 	/* For write accesses caches are useless */
@@ -186,7 +186,7 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
 			MOD_NAME, map->map.phys);
 
 		/* There is no generic VPP support */
-		for(map->map.bankwidth = 32; map->map.bankwidth; 
+		for(map->map.bankwidth = 32; map->map.bankwidth;
 			map->map.bankwidth >>= 1)
 		{
 			char **probe_type;
@@ -239,7 +239,7 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
 		for(i = 0; i < cfi->numchips; i++) {
 			cfi->chips[i].start += offset;
 		}
-		
+
 		/* Now that the mtd devices is complete claim and export it */
 		map->mtd->owner = THIS_MODULE;
 		if (add_mtd_device(map->mtd)) {
@@ -279,9 +279,9 @@ static void __devexit amd76xrom_remove_one (struct pci_dev *pdev)
 }
 
 static struct pci_device_id amd76xrom_pci_tbl[] = {
-	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410,  
+	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410,
 		PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7440,  
+	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7440,
 		PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_AMD, 0x7468 }, /* amd8111 support */
 	{ 0, }
diff --git a/drivers/mtd/maps/arctic-mtd.c b/drivers/mtd/maps/arctic-mtd.c
index 777276fd0e1..d95ae582fbe 100644
--- a/drivers/mtd/maps/arctic-mtd.c
+++ b/drivers/mtd/maps/arctic-mtd.c
@@ -1,7 +1,7 @@
 /*
- * $Id: arctic-mtd.c,v 1.13 2004/11/04 13:24:14 gleixner Exp $
- * 
- * drivers/mtd/maps/arctic-mtd.c MTD mappings and partition tables for 
+ * $Id: arctic-mtd.c,v 1.14 2005/11/07 11:14:26 gleixner Exp $
+ *
+ * drivers/mtd/maps/arctic-mtd.c MTD mappings and partition tables for
  *                              IBM 405LP Arctic boards.
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c
index cf362ccc3c8..7ed3424dd95 100644
--- a/drivers/mtd/maps/autcpu12-nvram.c
+++ b/drivers/mtd/maps/autcpu12-nvram.c
@@ -1,8 +1,8 @@
 /*
- * NV-RAM memory access on autcpu12 
+ * NV-RAM memory access on autcpu12
  * (C) 2002 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: autcpu12-nvram.c,v 1.8 2004/11/04 13:24:14 gleixner Exp $ 
+ * $Id: autcpu12-nvram.c,v 1.9 2005/11/07 11:14:26 gleixner Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -55,10 +55,10 @@ static int __init init_autcpu12_sram (void)
 	}
 	simple_map_init(&autcpu_sram_map);
 
-	/* 
-	 * Check for 32K/128K 
-	 * read ofs 0 
-	 * read ofs 0x10000 
+	/*
+	 * Check for 32K/128K
+	 * read ofs 0
+	 * read ofs 0x10000
 	 * Write complement to ofs 0x100000
 	 * Read	and check result on ofs 0x0
 	 * Restore contents
@@ -66,7 +66,7 @@ static int __init init_autcpu12_sram (void)
 	save0 = map_read32(&autcpu12_sram_map,0);
 	save1 = map_read32(&autcpu12_sram_map,0x10000);
 	map_write32(&autcpu12_sram_map,~save0,0x10000);
-	/* if we find this pattern on 0x0, we have 32K size 
+	/* if we find this pattern on 0x0, we have 32K size
 	 * restore contents and exit
 	 */
 	if ( map_read32(&autcpu12_sram_map,0) != save0) {
@@ -89,7 +89,7 @@ map:
 
 	sram_mtd->owner = THIS_MODULE;
 	sram_mtd->erasesize = 16;
-	
+
 	if (add_mtd_device(sram_mtd)) {
 		printk("NV-RAM device addition failed\n");
 		err = -ENOMEM;
@@ -97,7 +97,7 @@ map:
 	}
 
 	printk("NV-RAM device size %ldKiB registered on AUTCPU12\n",autcpu12_sram_map.size/SZ_1K);
-		
+
 	return 0;
 
 out_probe:
diff --git a/drivers/mtd/maps/bast-flash.c b/drivers/mtd/maps/bast-flash.c
index 5ec53c17e43..610dfcaa2c8 100644
--- a/drivers/mtd/maps/bast-flash.c
+++ b/drivers/mtd/maps/bast-flash.c
@@ -9,7 +9,7 @@
  *	20-Sep-2004  BJD  Initial version
  *	17-Jan-2005  BJD  Add whole device if no partitions found
  *
- * $Id: bast-flash.c,v 1.3 2005/10/10 00:13:38 bjd Exp $
+ * $Id: bast-flash.c,v 1.5 2005/11/07 11:14:26 gleixner Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -75,7 +75,7 @@ static void bast_flash_setrw(int to)
 
 	local_irq_save(flags);
 	val = __raw_readb(BAST_VA_CTRL3);
-	
+
 	if (to)
 		val |= BAST_CPLD_CTRL3_ROMWEN;
 	else
@@ -93,7 +93,7 @@ static int bast_flash_remove(struct device *dev)
 
 	dev_set_drvdata(dev, NULL);
 
-	if (info == NULL) 
+	if (info == NULL)
 		return 0;
 
 	if (info->map.virt != NULL)
@@ -111,7 +111,7 @@ static int bast_flash_remove(struct device *dev)
 		release_resource(info->area);
 		kfree(info->area);
 	}
-	
+
 	kfree(info);
 
 	return 0;
@@ -138,15 +138,15 @@ static int bast_flash_probe(struct device *dev)
 
 	info->map.phys = res->start;
 	info->map.size = res->end - res->start + 1;
-	info->map.name = dev->bus_id;	
+	info->map.name = dev->bus_id;
 	info->map.bankwidth = 2;
-	
+
 	if (info->map.size > AREA_MAXSIZE)
 		info->map.size = AREA_MAXSIZE;
 
 	pr_debug("%s: area %08lx, size %ld\n", __FUNCTION__,
 		 info->map.phys, info->map.size);
-	
+
 	info->area = request_mem_region(res->start, info->map.size,
 					pdev->name);
 	if (info->area == NULL) {
@@ -163,7 +163,7 @@ static int bast_flash_probe(struct device *dev)
 		err = -EIO;
 		goto exit_error;
 	}
- 
+
 	simple_map_init(&info->map);
 
 	/* enable the write to the flash area */
@@ -188,7 +188,7 @@ static int bast_flash_probe(struct device *dev)
 	err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
 	if (err > 0) {
 		err = add_mtd_partitions(info->mtd, info->partitions, err);
-		if (err) 
+		if (err)
 			printk(KERN_ERR PFX "cannot add/parse partitions\n");
 	} else {
 		err = add_mtd_device(info->mtd);
diff --git a/drivers/mtd/maps/beech-mtd.c b/drivers/mtd/maps/beech-mtd.c
index 5e79c9d5da2..5df7361d140 100644
--- a/drivers/mtd/maps/beech-mtd.c
+++ b/drivers/mtd/maps/beech-mtd.c
@@ -1,7 +1,7 @@
 /*
- * $Id: beech-mtd.c,v 1.10 2004/11/04 13:24:14 gleixner Exp $
- * 
- * drivers/mtd/maps/beech-mtd.c MTD mappings and partition tables for 
+ * $Id: beech-mtd.c,v 1.11 2005/11/07 11:14:26 gleixner Exp $
+ *
+ * drivers/mtd/maps/beech-mtd.c MTD mappings and partition tables for
  *                              IBM 405LP Beech boards.
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c
index ab15dac2f93..9f17bb6c5a9 100644
--- a/drivers/mtd/maps/cdb89712.c
+++ b/drivers/mtd/maps/cdb89712.c
@@ -1,7 +1,7 @@
 /*
  * Flash on Cirrus CDB89712
  *
- * $Id: cdb89712.c,v 1.10 2004/11/04 13:24:14 gleixner Exp $
+ * $Id: cdb89712.c,v 1.11 2005/11/07 11:14:26 gleixner Exp $
  */
 
 #include <linux/module.h>
@@ -37,13 +37,13 @@ struct resource cdb89712_flash_resource = {
 static int __init init_cdb89712_flash (void)
 {
 	int err;
-	
+
 	if (request_resource (&ioport_resource, &cdb89712_flash_resource)) {
 		printk(KERN_NOTICE "Failed to reserve Cdb89712 FLASH space\n");
 		err = -EBUSY;
 		goto out;
 	}
-	
+
 	cdb89712_flash_map.virt = ioremap(FLASH_START, FLASH_SIZE);
 	if (!cdb89712_flash_map.virt) {
 		printk(KERN_NOTICE "Failed to ioremap Cdb89712 FLASH space\n");
@@ -64,13 +64,13 @@ static int __init init_cdb89712_flash (void)
 	}
 
 	flash_mtd->owner = THIS_MODULE;
-	
+
 	if (add_mtd_device(flash_mtd)) {
 		printk("FLASH device addition failed\n");
 		err = -ENOMEM;
 		goto out_probe;
 	}
-		
+
 	return 0;
 
 out_probe:
@@ -107,13 +107,13 @@ struct resource cdb89712_sram_resource = {
 static int __init init_cdb89712_sram (void)
 {
 	int err;
-	
+
 	if (request_resource (&ioport_resource, &cdb89712_sram_resource)) {
 		printk(KERN_NOTICE "Failed to reserve Cdb89712 SRAM space\n");
 		err = -EBUSY;
 		goto out;
 	}
-	
+
 	cdb89712_sram_map.virt = ioremap(SRAM_START, SRAM_SIZE);
 	if (!cdb89712_sram_map.virt) {
 		printk(KERN_NOTICE "Failed to ioremap Cdb89712 SRAM space\n");
@@ -130,13 +130,13 @@ static int __init init_cdb89712_sram (void)
 
 	sram_mtd->owner = THIS_MODULE;
 	sram_mtd->erasesize = 16;
-	
+
 	if (add_mtd_device(sram_mtd)) {
 		printk("SRAM device addition failed\n");
 		err = -ENOMEM;
 		goto out_probe;
 	}
-		
+
 	return 0;
 
 out_probe:
@@ -175,13 +175,13 @@ struct resource cdb89712_bootrom_resource = {
 static int __init init_cdb89712_bootrom (void)
 {
 	int err;
-	
+
 	if (request_resource (&ioport_resource, &cdb89712_bootrom_resource)) {
 		printk(KERN_NOTICE "Failed to reserve Cdb89712 BOOTROM space\n");
 		err = -EBUSY;
 		goto out;
 	}
-	
+
 	cdb89712_bootrom_map.virt = ioremap(BOOTROM_START, BOOTROM_SIZE);
 	if (!cdb89712_bootrom_map.virt) {
 		printk(KERN_NOTICE "Failed to ioremap Cdb89712 BootROM space\n");
@@ -198,13 +198,13 @@ static int __init init_cdb89712_bootrom (void)
 
 	bootrom_mtd->owner = THIS_MODULE;
 	bootrom_mtd->erasesize = 0x10000;
-	
+
 	if (add_mtd_device(bootrom_mtd)) {
 		printk("BootROM device addition failed\n");
 		err = -ENOMEM;
 		goto out_probe;
 	}
-		
+
 	return 0;
 
 out_probe:
@@ -225,16 +225,16 @@ out:
 static int __init init_cdb89712_maps(void)
 {
 
-       	printk(KERN_INFO "Cirrus CDB89712 MTD mappings:\n  Flash 0x%x at 0x%x\n  SRAM 0x%x at 0x%x\n  BootROM 0x%x at 0x%x\n", 
+       	printk(KERN_INFO "Cirrus CDB89712 MTD mappings:\n  Flash 0x%x at 0x%x\n  SRAM 0x%x at 0x%x\n  BootROM 0x%x at 0x%x\n",
 	       FLASH_SIZE, FLASH_START, SRAM_SIZE, SRAM_START, BOOTROM_SIZE, BOOTROM_START);
 
 	init_cdb89712_flash();
 	init_cdb89712_sram();
 	init_cdb89712_bootrom();
-	
+
 	return 0;
 }
-	
+
 
 static void __exit cleanup_cdb89712_maps(void)
 {
@@ -244,7 +244,7 @@ static void __exit cleanup_cdb89712_maps(void)
 		iounmap((void *)cdb89712_sram_map.virt);
 		release_resource (&cdb89712_sram_resource);
 	}
-	
+
 	if (flash_mtd) {
 		del_mtd_device(flash_mtd);
 		map_destroy(flash_mtd);
diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c
index f72e4f894b3..6a8c0415bde 100644
--- a/drivers/mtd/maps/cfi_flagadm.c
+++ b/drivers/mtd/maps/cfi_flagadm.c
@@ -1,8 +1,8 @@
 /*
  *  Copyright © 2001 Flaga hf. Medical Devices, Kári Davíđsson <kd@flaga.is>
  *
- *  $Id: cfi_flagadm.c,v 1.14 2004/11/04 13:24:14 gleixner Exp $
- *  
+ *  $Id: cfi_flagadm.c,v 1.15 2005/11/07 11:14:26 gleixner Exp $
+ *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
@@ -42,7 +42,7 @@
  */
 
 #define FLASH_PHYS_ADDR 0x40000000
-#define FLASH_SIZE 0x400000  
+#define FLASH_SIZE 0x400000
 
 #define FLASH_PARTITION0_ADDR 0x00000000
 #define FLASH_PARTITION0_SIZE 0x00020000
@@ -79,7 +79,7 @@ struct mtd_partition flagadm_parts[] = {
 		.offset =	FLASH_PARTITION2_ADDR,
 		.size =		FLASH_PARTITION2_SIZE
 	},
-	{	
+	{
 		.name =		"Persistant storage",
 		.offset =	FLASH_PARTITION3_ADDR,
 		.size =		FLASH_PARTITION3_SIZE
@@ -91,10 +91,10 @@ struct mtd_partition flagadm_parts[] = {
 static struct mtd_info *mymtd;
 
 int __init init_flagadm(void)
-{	
+{
 	printk(KERN_NOTICE "FlagaDM flash device: %x at %x\n",
 			FLASH_SIZE, FLASH_PHYS_ADDR);
-	
+
 	flagadm_map.phys = FLASH_PHYS_ADDR;
 	flagadm_map.virt = ioremap(FLASH_PHYS_ADDR,
 					FLASH_SIZE);
diff --git a/drivers/mtd/maps/cstm_mips_ixx.c b/drivers/mtd/maps/cstm_mips_ixx.c
index ae9252fbf17..a370953c151 100644
--- a/drivers/