Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: misc comment fixes
  UBI: fix s/then/than/ typos
  UBI: init even if MTD device cannot be attached, if built into kernel
  UBI: remove reboot notifier

8 files changed, 35 insertions, 51 deletions

diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 0a8c7ea764a..f702a163d8d 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -27,7 +27,7 @@ config MTD_UBI_WL_THRESHOLD
 	  The default value should be OK for SLC NAND flashes, NOR flashes and
 	  other flashes which have eraseblock life-cycle 100000 or more.
 	  However, in case of MLC NAND flashes which typically have eraseblock
-	  life-cycle less then 10000, the threshold should be lessened (e.g.,
+	  life-cycle less than 10000, the threshold should be lessened (e.g.,
 	  to 128 or 256, although it does not have to be power of 2).
 
 config MTD_UBI_BEB_RESERVE
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 55c726dde94..13b05cb33b0 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -42,7 +42,6 @@
 #include <linux/miscdevice.h>
 #include <linux/log2.h>
 #include <linux/kthread.h>
-#include <linux/reboot.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include "ubi.h"
@@ -50,6 +49,12 @@
 /* Maximum length of the 'mtd=' parameter */
 #define MTD_PARAM_LEN_MAX 64
 
+#ifdef CONFIG_MTD_UBI_MODULE
+#define ubi_is_module() 1
+#else
+#define ubi_is_module() 0
+#endif
+
 /**
  * struct mtd_dev_param - MTD device parameter description data structure.
  * @name: MTD character device node path, MTD device name, or MTD device number
@@ -832,34 +837,6 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
 }
 
 /**
- * ubi_reboot_notifier - halt UBI transactions immediately prior to a reboot.
- * @n: reboot notifier object
- * @state: SYS_RESTART, SYS_HALT, or SYS_POWER_OFF
- * @cmd: pointer to command string for RESTART2
- *
- * This function stops the UBI background thread so that the flash device
- * remains quiescent when Linux restarts the system. Any queued work will be
- * discarded, but this function will block until do_work() finishes if an
- * operation is already in progress.
- *
- * This function solves a real-life problem observed on NOR flashes when an
- * PEB erase operation starts, then the system is rebooted before the erase is
- * finishes, and the boot loader gets confused and dies. So we prefer to finish
- * the ongoing operation before rebooting.
- */
-static int ubi_reboot_notifier(struct notifier_block *n, unsigned long state,
-			       void *cmd)
-{
-	struct ubi_device *ubi;
-
-	ubi = container_of(n, struct ubi_device, reboot_notifier);
-	if (ubi->bgt_thread)
-		kthread_stop(ubi->bgt_thread);
-	ubi_sync(ubi->ubi_num);
-	return NOTIFY_DONE;
-}
-
-/**
  * ubi_attach_mtd_dev - attach an MTD device.
  * @mtd: MTD device description object
  * @ubi_num: number to assign to the new UBI device
@@ -1016,11 +993,6 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	wake_up_process(ubi->bgt_thread);
 	spin_unlock(&ubi->wl_lock);
 
-	/* Flash device priority is 0 - UBI needs to shut down first */
-	ubi->reboot_notifier.priority = 1;
-	ubi->reboot_notifier.notifier_call = ubi_reboot_notifier;
-	register_reboot_notifier(&ubi->reboot_notifier);
-
 	ubi_devices[ubi_num] = ubi;
 	ubi_notify_all(ubi, UBI_VOLUME_ADDED, NULL);
 	return ubi_num;
@@ -1091,7 +1063,6 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
 	 * Before freeing anything, we have to stop the background thread to
 	 * prevent it from doing anything on this device while we are freeing.
 	 */
-	unregister_reboot_notifier(&ubi->reboot_notifier);
 	if (ubi->bgt_thread)
 		kthread_stop(ubi->bgt_thread);
 
@@ -1241,9 +1212,24 @@ static int __init ubi_init(void)
 					 p->vid_hdr_offs);
 		mutex_unlock(&ubi_devices_mutex);
 		if (err < 0) {
-			put_mtd_device(mtd);
 			ubi_err("cannot attach mtd%d", mtd->index);
-			goto out_detach;
+			put_mtd_device(mtd);
+
+			/*
+			 * Originally UBI stopped initializing on any error.
+			 * However, later on it was found out that this
+			 * behavior is not very good when UBI is compiled into
+			 * the kernel and the MTD devices to attach are passed
+			 * through the command line. Indeed, UBI failure
+			 * stopped whole boot sequence.
+			 *
+			 * To fix this, we changed the behavior for the
+			 * non-module case, but preserved the old behavior for
+			 * the module case, just for compatibility. This is a
+			 * little inconsistent, though.
+			 */
+			if (ubi_is_module())
+				goto out_detach;
 		}
 	}
 
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 533b1a4b9af..4b979e34b15 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -64,9 +64,9 @@
  * device, e.g., make @ubi->min_io_size = 512 in the example above?
  *
  * A: because when writing a sub-page, MTD still writes a full 2K page but the
- * bytes which are no relevant to the sub-page are 0xFF. So, basically, writing
- * 4x512 sub-pages is 4 times slower then writing one 2KiB NAND page. Thus, we
- * prefer to use sub-pages only for EV and VID headers.
+ * bytes which are not relevant to the sub-page are 0xFF. So, basically,
+ * writing 4x512 sub-pages is 4 times slower than writing one 2KiB NAND page.
+ * Thus, we prefer to use sub-pages only for EC and VID headers.
  *
  * As it was noted above, the VID header may start at a non-aligned offset.
  * For example, in case of a 2KiB page NAND flash with a 512 bytes sub-page,
diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c
index 17f287decc3..69fa4ef03c5 100644
--- a/drivers/mtd/ubi/kapi.c
+++ b/drivers/mtd/ubi/kapi.c
@@ -488,7 +488,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_write);
  *
  * This function changes the contents of a logical eraseblock atomically. @buf
  * has to contain new logical eraseblock data, and @len - the length of the
- * data, which has to be aligned. The length may be shorter then the logical
+ * data, which has to be aligned. The length may be shorter than the logical
  * eraseblock size, ant the logical eraseblock may be appended to more times
  * later on. This function guarantees that in case of an unclean reboot the old
  * contents is preserved. Returns zero in case of success and a negative error
@@ -571,7 +571,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_erase);
  *
  * This function un-maps logical eraseblock @lnum and schedules the
  * corresponding physical eraseblock for erasure, so that it will eventually be
- * physically erased in background. This operation is much faster then the
+ * physically erased in background. This operation is much faster than the
  * erase operation.
  *
  * Unlike erase, the un-map operation does not guarantee that the logical
@@ -590,7 +590,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_erase);
  *
  * The main and obvious use-case of this function is when the contents of a
  * logical eraseblock has to be re-written. Then it is much more efficient to
- * first un-map it, then write new data, rather then first erase it, then write
+ * first un-map it, then write new data, rather than first erase it, then write
  * new data. Note, once new data has been written to the logical eraseblock,
  * UBI guarantees that the old contents has gone forever. In other words, if an
  * unclean reboot happens after the logical eraseblock has been un-mapped and
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index dc5f688699d..aed19f33b8f 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -231,7 +231,7 @@ static struct ubi_scan_volume *add_volume(struct ubi_scan_info *si, int vol_id,
  * case of success this function returns a positive value, in case of failure, a
  * negative error code is returned. The success return codes use the following
  * bits:
- *     o bit 0 is cleared: the first PEB (described by @seb) is newer then the
+ *     o bit 0 is cleared: the first PEB (described by @seb) is newer than the
  *       second PEB (described by @pnum and @vid_hdr);
  *     o bit 0 is set: the second PEB is newer;
  *     o bit 1 is cleared: no bit-flips were detected in the newer LEB;
@@ -452,7 +452,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 
 		if (cmp_res & 1) {
 			/*
-			 * This logical eraseblock is newer then the one
+			 * This logical eraseblock is newer than the one
 			 * found earlier.
 			 */
 			err = validate_vid_hdr(vid_hdr, sv, pnum);
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 5176d488651..a637f0283ad 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -350,7 +350,6 @@ struct ubi_wl_entry;
  * @bgt_thread: background thread description object
  * @thread_enabled: if the background thread is enabled
  * @bgt_name: background thread name
- * @reboot_notifier: notifier to terminate background thread before rebooting
  *
  * @flash_size: underlying MTD device size (in bytes)
  * @peb_count: count of physical eraseblocks on the MTD device
@@ -436,7 +435,6 @@ struct ubi_device {
 	struct task_struct *bgt_thread;
 	int thread_enabled;
 	char bgt_name[sizeof(UBI_BGT_NAME_PATTERN)+2];
-	struct notifier_block reboot_notifier;
 
 	/* I/O sub-system's stuff */
 	long long flash_size;
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index cd90ff3b76b..14c10bed94e 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -414,7 +414,7 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 	 * 0 contains more recent information.
 	 *
 	 * So the plan is to first check LEB 0. Then
-	 * a. if LEB 0 is OK, it must be containing the most resent data; then
+	 * a. if LEB 0 is OK, it must be containing the most recent data; then
 	 *    we compare it with LEB 1, and if they are different, we copy LEB
 	 *    0 to LEB 1;
 	 * b. if LEB 0 is corrupted, but LEB 1 has to be OK, and we copy LEB 1
@@ -848,7 +848,7 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
 		goto out_free;
 
 	/*
-	 * Get sure that the scanning information is consistent to the
+	 * Make sure that the scanning information is consistent to the
 	 * information stored in the volume table.
 	 */
 	err = check_scanning_info(ubi, si);
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index f64ddabd4ac..ee7b1d8fbb9 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -350,7 +350,7 @@ static void prot_queue_add(struct ubi_device *ubi, struct ubi_wl_entry *e)
  * @max: highest possible erase counter
  *
  * This function looks for a wear leveling entry with erase counter closest to
- * @max and less then @max.
+ * @max and less than @max.
  */
 static struct ubi_wl_entry *find_wl_entry(struct rb_root *root, int max)
 {