[MTD] Remove references to TI 'toto' platform.

This was a reference board for which support never got merged upstream.
Kill it off, at rmk's suggestion.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

3 files changed, 0 insertions, 213 deletions

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 02f9cc30d77..572c842e9f4 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -68,12 +68,6 @@ config MTD_NAND_AMS_DELTA
 	help
 	  Support for NAND flash on Amstrad E3 (Delta).
 
-config MTD_NAND_TOTO
-	tristate "NAND Flash device on TOTO board"
-	depends on ARCH_OMAP && BROKEN
-	help
-	  Support for NAND flash on Texas Instruments Toto platform.
-
 config MTD_NAND_TS7250
 	tristate "NAND Flash device on TS-7250 board"
 	depends on MACH_TS72XX
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index d772581de57..b55e4c69fea 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -8,7 +8,6 @@ obj-$(CONFIG_MTD_NAND_IDS)		+= nand_ids.o
 obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nand.o
 obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
 obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
-obj-$(CONFIG_MTD_NAND_TOTO)		+= toto.o
 obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
 obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
 obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
diff --git a/drivers/mtd/nand/toto.c b/drivers/mtd/nand/toto.c
deleted file mode 100644
index bbf492e6830..00000000000
--- a/drivers/mtd/nand/toto.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- *  drivers/mtd/nand/toto.c
- *
- *  Copyright (c) 2003 Texas Instruments
- *
- *  Derived from drivers/mtd/autcpu12.c
- *
- *  Copyright (c) 2002 Thomas Gleixner <tgxl@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Overview:
- *   This is a device driver for the NAND flash device found on the
- *   TI fido board. It supports 32MiB and 64MiB cards
- */
-
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/sizes.h>
-#include <asm/arch/toto.h>
-#include <asm/arch-omap1510/hardware.h>
-#include <asm/arch/gpio.h>
-
-#define CONFIG_NAND_WORKAROUND 1
-
-/*
- * MTD structure for TOTO board
- */
-static struct mtd_info *toto_mtd = NULL;
-
-static unsigned long toto_io_base = OMAP_FLASH_1_BASE;
-
-/*
- * Define partitions for flash devices
- */
-
-static struct mtd_partition partition_info64M[] = {
-	{ .name =	"toto kernel partition 1",
-	  .offset =	0,
-	  .size	=	2 * SZ_1M },
-	{ .name =	"toto file sys partition 2",
-	  .offset =	2 * SZ_1M,
-	  .size =	14 * SZ_1M },
-	{ .name =	"toto user partition 3",
-	  .offset =	16 * SZ_1M,
-	  .size =	16 * SZ_1M },
-	{ .name =	"toto devboard extra partition 4",
-	  .offset =	32 * SZ_1M,
-	  .size =	32 * SZ_1M },
-};
-
-static struct mtd_partition partition_info32M[] = {
-	{ .name =	"toto kernel partition 1",
-	  .offset =	0,
-	  .size =	2 * SZ_1M },
-	{ .name =	"toto file sys partition 2",
-	  .offset =	2 * SZ_1M,
-	  .size =	14 * SZ_1M },
-	{ .name =	"toto user partition 3",
-	  .offset =	16 * SZ_1M,
-	  .size =	16 * SZ_1M },
-};
-
-#define NUM_PARTITIONS32M 3
-#define NUM_PARTITIONS64M 4
-
-/*
- *	hardware specific access to control-lines
- *
- *	ctrl:
- *	NAND_NCE: bit 0 -> bit 14 (0x4000)
- *	NAND_CLE: bit 1 -> bit 12 (0x1000)
- *	NAND_ALE: bit 2 -> bit 1  (0x0002)
- */
-static void toto_hwcontrol(struct mtd_info *mtd, int cmd,
-			   unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		unsigned long bits;
-
-		/* hopefully enough time for tc make proceding write to clear */
-		udelay(1);
-
-		bits = (~ctrl & NAND_NCE) << 14;
-		bits |= (ctrl & NAND_CLE) << 12;
-		bits |= (ctrl & NAND_ALE) >> 1;
-
-#warning Wild guess as gpiosetout() is nowhere defined in the kernel source - tglx
-		gpiosetout(0x5002, bits);
-
-#ifdef CONFIG_NAND_WORKAROUND
-		/* "some" dev boards busted, blue wired to rts2 :( */
-		rts2setout(2, (ctrl & NAND_CLE) << 1);
-#endif
-		/* allow time to ensure gpio state to over take memory write */
-		udelay(1);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, chip->IO_ADDR_W);
-}
-
-/*
- * Main initialization routine
- */
-static int __init toto_init(void)
-{
-	struct nand_chip *this;
-	int err = 0;
-
-	/* Allocate memory for MTD device structure and private data */
-	toto_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-	if (!toto_mtd) {
-		printk(KERN_WARNING "Unable to allocate toto NAND MTD device structure.\n");
-		err = -ENOMEM;
-		goto out;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *)(&toto_mtd[1]);
-
-	/* Initialize structures */
-	memset(toto_mtd, 0, sizeof(struct mtd_info));
-	memset(this, 0, sizeof(struct nand_chip));
-
-	/* Link the private data with the MTD structure */
-	toto_mtd->priv = this;
-	toto_mtd->owner = THIS_MODULE;
-
-	/* Set address of NAND IO lines */
-	this->IO_ADDR_R = toto_io_base;
-	this->IO_ADDR_W = toto_io_base;
-	this->cmd_ctrl = toto_hwcontrol;
-	this->dev_ready = NULL;
-	/* 25 us command delay time */
-	this->chip_delay = 30;
-	this->ecc.mode = NAND_ECC_SOFT;
-
-	/* Scan to find existance of the device */
-	if (nand_scan(toto_mtd, 1)) {
-		err = -ENXIO;
-		goto out_mtd;
-	}
-
-	/* Register the partitions */
-	switch (toto_mtd->size) {
-	case SZ_64M:
-		add_mtd_partitions(toto_mtd, partition_info64M, NUM_PARTITIONS64M);
-		break;
-	case SZ_32M:
-		add_mtd_partitions(toto_mtd, partition_info32M, NUM_PARTITIONS32M);
-		break;
-	default:{
-			printk(KERN_WARNING "Unsupported Nand device\n");
-			err = -ENXIO;
-			goto out_buf;
-		}
-	}
-
-	gpioreserve(NAND_MASK);	/* claim our gpios */
-	archflashwp(0, 0);	/* open up flash for writing */
-
-	goto out;
-
- out_mtd:
-	kfree(toto_mtd);
- out:
-	return err;
-}
-
-module_init(toto_init);
-
-/*
- * Clean up routine
- */
-static void __exit toto_cleanup(void)
-{
-	/* Release resources, unregister device */
-	nand_release(toto_mtd);
-
-	/* Free the MTD device structure */
-	kfree(toto_mtd);
-
-	/* stop flash writes */
-	archflashwp(0, 1);
-
-	/* release gpios to system */
-	gpiorelease(NAND_MASK);
-}
-
-module_exit(toto_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Richard Woodruff <r-woodruff2@ti.com>");
-MODULE_DESCRIPTION("Glue layer for NAND flash on toto board");