aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd/devices
diff options
context:
space:
mode:
authorKevin Cernekee <cernekee@gmail.com>2010-10-30 21:11:03 -0700
committerDavid Woodhouse <David.Woodhouse@intel.com>2010-12-03 16:26:55 +0000
commit4b7f7422b0331e802f8b7c593e058ccee981cff5 (patch)
tree24276b0e9eff0122d3a1b2ecec1411ac6ffecbf5 /drivers/mtd/devices
parentf0dff9bd00d2cffea160fb3fa015b77607458634 (diff)
mtd: m25p80: Add support for Macronix MX25L25635E
This is a 256Mbit (32MiB) part so minor changes were made to support 4-byte addressing. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Diffstat (limited to 'drivers/mtd/devices')
-rw-r--r--drivers/mtd/devices/m25p80.c31
1 files changed, 28 insertions, 3 deletions
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 80404e1a4d5..96ae54e9650 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -51,6 +51,10 @@
#define OPCODE_WRDI 0x04 /* Write disable */
#define OPCODE_AAI_WP 0xad /* Auto address increment word program */
+/* Used for Macronix flashes only. */
+#define OPCODE_EN4B 0xb7 /* Enter 4-byte mode */
+#define OPCODE_EX4B 0xe9 /* Exit 4-byte mode */
+
/* Status Register bits. */
#define SR_WIP 1 /* Write in progress */
#define SR_WEL 2 /* Write enable latch */
@@ -62,7 +66,7 @@
/* Define max times to check status register before we give up. */
#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */
-#define MAX_CMD_SIZE 4
+#define MAX_CMD_SIZE 5
#ifdef CONFIG_M25PXX_USE_FAST_READ
#define OPCODE_READ OPCODE_FAST_READ
@@ -152,6 +156,16 @@ static inline int write_disable(struct m25p *flash)
}
/*
+ * Enable/disable 4-byte addressing mode.
+ */
+static inline int set_4byte(struct m25p *flash, int enable)
+{
+ u8 code = enable ? OPCODE_EN4B : OPCODE_EX4B;
+
+ return spi_write_then_read(flash->spi, &code, 1, NULL, 0);
+}
+
+/*
* Service routine to read status register until ready, or timeout occurs.
* Returns non-zero if error.
*/
@@ -207,6 +221,7 @@ static void m25p_addr2cmd(struct m25p *flash, unsigned int addr, u8 *cmd)
cmd[1] = addr >> (flash->addr_width * 8 - 8);
cmd[2] = addr >> (flash->addr_width * 8 - 16);
cmd[3] = addr >> (flash->addr_width * 8 - 24);
+ cmd[4] = addr >> (flash->addr_width * 8 - 32);
}
static int m25p_cmdsz(struct m25p *flash)
@@ -607,7 +622,6 @@ struct flash_info {
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = 256, \
- .addr_width = 3, \
.flags = (_flags), \
})
@@ -653,6 +667,7 @@ static const struct spi_device_id m25p_ids[] = {
{ "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, 0) },
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+ { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
/* Spansion -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
@@ -884,7 +899,17 @@ static int __devinit m25p_probe(struct spi_device *spi)
flash->mtd.dev.parent = &spi->dev;
flash->page_size = info->page_size;
- flash->addr_width = info->addr_width;
+
+ if (info->addr_width)
+ flash->addr_width = info->addr_width;
+ else {
+ /* enable 4-byte addressing if the device exceeds 16MiB */
+ if (flash->mtd.size > 0x1000000) {
+ flash->addr_width = 4;
+ set_4byte(flash, 1);
+ } else
+ flash->addr_width = 3;
+ }
dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name,
(long long)flash->mtd.size >> 10);