Merge tag 'isci-for-3.5' into misc

isci update for 3.5

1/ Rework remote-node-context (RNC) handling for proper management of
   the silicon state machine in error handling and hot-plug conditions.
   Further details below, suffice to say if the RNC is mismanaged the
   silicon state machines may lock up.

2/ Refactor the initialization code to be reused for suspend/resume support

3/ Miscellaneous bug fixes to address discovery issues and hardware
   compatibility.

RNC rework details from Jeff Skirvin:

In the controller, devices as they appear on a SAS domain (or
direct-attached SATA devices) are represented by memory structures known
as "Remote Node Contexts" (RNCs).  These structures are transferred from
main memory to the controller using a set of register commands; these
commands include setting up the context ("posting"), removing the
context ("invalidating"), and commands to control the scheduling of
commands and connections to that remote device ("suspensions" and
"resumptions").  There is a similar path to control RNC scheduling from
the protocol engine, which interprets the results of command and data
transmission and reception.

In general, the controller chooses among non-suspended RNCs to find one
that has work requiring scheduling the transmission of command and data
frames to a target.  Likewise, when a target tries to return data back
to the initiator, the state of the RNC is used by the controller to
determine how to treat the incoming request. As an example, if the RNC
is in the state "TX/RX Suspended", incoming SSP connection requests from
the target will be rejected by the controller hardware.  When an RNC is
"TX Suspended", it will not be selected by the controller hardware to
start outgoing command or data operations (with certain priority-based
exceptions).

As mentioned above, there are two sources for management of the RNC
states: commands from driver software, and the result of transmission
and reception conditions of commands and data signaled by the controller
hardware.  As an example of the latter, if an outgoing SSP command ends
with a OPEN_REJECT(BAD_DESTINATION) status, the RNC state will
transition to the "TX Suspended" state, and this is signaled by the
controller hardware in the status to the completion of the pending
command as well as signaled in a controller hardware event.  Examples of
the former are included in the patch changelogs.

Driver software is required to suspend the RNC in a "TX/RX Suspended"
condition before any outstanding commands can be terminated.  Failure to
guarantee this can lead to a complete hardware hang condition.  Earlier
versions of the driver software did not guarantee that an RNC was
correctly managed before I/O termination, and so operated in an unsafe
way.

Further, the driver performed unnecessary contortions to preserve the
remote device command state and so was more complicated than it needed
to be.  A simplifying driver assumption is that once an I/O has entered
the error handler path without having completed in the target, the
requirement on the driver is that all use of the sas_task must end.
Beyond that, recovery of operation is dependent on libsas and other
components to reset, rediscover and reconfigure the device before normal
operation can restart.  In the driver, this simplifying assumption meant
that the RNC management could be reduced to entry into the suspended
state, terminating the targeted I/O request, and resuming the RNC as
needed for device-specific management such as an SSP Abort Task or LUN
Reset Management request.

3 files changed, 35 insertions, 54 deletions

diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 3f606068d55..c60cee92a2b 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -122,14 +122,14 @@ static int mmc_bus_remove(struct device *dev)
 	return 0;
 }
 
-static int mmc_bus_suspend(struct device *dev, pm_message_t state)
+static int mmc_bus_suspend(struct device *dev)
 {
 	struct mmc_driver *drv = to_mmc_driver(dev->driver);
 	struct mmc_card *card = mmc_dev_to_card(dev);
 	int ret = 0;
 
 	if (dev->driver && drv->suspend)
-		ret = drv->suspend(card, state);
+		ret = drv->suspend(card);
 	return ret;
 }
 
@@ -165,20 +165,14 @@ static int mmc_runtime_idle(struct device *dev)
 	return pm_runtime_suspend(dev);
 }
 
+#endif /* !CONFIG_PM_RUNTIME */
+
 static const struct dev_pm_ops mmc_bus_pm_ops = {
-	.runtime_suspend	= mmc_runtime_suspend,
-	.runtime_resume		= mmc_runtime_resume,
-	.runtime_idle		= mmc_runtime_idle,
+	SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume,
+			mmc_runtime_idle)
+	SET_SYSTEM_SLEEP_PM_OPS(mmc_bus_suspend, mmc_bus_resume)
 };
 
-#define MMC_PM_OPS_PTR	(&mmc_bus_pm_ops)
-
-#else /* !CONFIG_PM_RUNTIME */
-
-#define MMC_PM_OPS_PTR	NULL
-
-#endif /* !CONFIG_PM_RUNTIME */
-
 static struct bus_type mmc_bus_type = {
 	.name		= "mmc",
 	.dev_attrs	= mmc_dev_attrs,
@@ -186,9 +180,7 @@ static struct bus_type mmc_bus_type = {
 	.uevent		= mmc_bus_uevent,
 	.probe		= mmc_bus_probe,
 	.remove		= mmc_bus_remove,
-	.suspend	= mmc_bus_suspend,
-	.resume		= mmc_bus_resume,
-	.pm		= MMC_PM_OPS_PTR,
+	.pm		= &mmc_bus_pm_ops,
 };
 
 int mmc_register_bus(void)
diff --git a/drivers/mmc/core/cd-gpio.c b/drivers/mmc/core/cd-gpio.c
index 29de31e260d..2c14be73254 100644
--- a/drivers/mmc/core/cd-gpio.c
+++ b/drivers/mmc/core/cd-gpio.c
@@ -12,6 +12,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
+#include <linux/mmc/cd-gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/module.h>
 #include <linux/slab.h>
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 7474c47b9c0..ba821fe70bc 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1409,7 +1409,10 @@ static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card,
 {
 	unsigned int erase_timeout;
 
-	if (card->ext_csd.erase_group_def & 1) {
+	if (arg == MMC_DISCARD_ARG ||
+	    (arg == MMC_TRIM_ARG && card->ext_csd.rev >= 6)) {
+		erase_timeout = card->ext_csd.trim_timeout;
+	} else if (card->ext_csd.erase_group_def & 1) {
 		/* High Capacity Erase Group Size uses HC timeouts */
 		if (arg == MMC_TRIM_ARG)
 			erase_timeout = card->ext_csd.trim_timeout;
@@ -1681,8 +1684,6 @@ int mmc_can_trim(struct mmc_card *card)
 {
 	if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN)
 		return 1;
-	if (mmc_can_discard(card))
-		return 1;
 	return 0;
 }
 EXPORT_SYMBOL(mmc_can_trim);
@@ -1701,6 +1702,8 @@ EXPORT_SYMBOL(mmc_can_discard);
 
 int mmc_can_sanitize(struct mmc_card *card)
 {
+	if (!mmc_can_trim(card) && !mmc_can_erase(card))
+		return 0;
 	if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_SANITIZE)
 		return 1;
 	return 0;
@@ -2235,6 +2238,7 @@ int mmc_cache_ctrl(struct mmc_host *host, u8 enable)
 			mmc_card_is_removable(host))
 		return err;
 
+	mmc_claim_host(host);
 	if (card && mmc_card_mmc(card) &&
 			(card->ext_csd.cache_size > 0)) {
 		enable = !!enable;
@@ -2252,6 +2256,7 @@ int mmc_cache_ctrl(struct mmc_host *host, u8 enable)
 				card->ext_csd.cache_ctrl = enable;
 		}
 	}
+	mmc_release_host(host);
 
 	return err;
 }
@@ -2269,49 +2274,32 @@ int mmc_suspend_host(struct mmc_host *host)
 
 	cancel_delayed_work(&host->detect);
 	mmc_flush_scheduled_work();
-	if (mmc_try_claim_host(host)) {
-		err = mmc_cache_ctrl(host, 0);
-		mmc_release_host(host);
-	} else {
-		err = -EBUSY;
-	}
 
+	err = mmc_cache_ctrl(host, 0);
 	if (err)
 		goto out;
 
 	mmc_bus_get(host);
 	if (host->bus_ops && !host->bus_dead) {
 
-		/*
-		 * A long response time is not acceptable for device drivers
-		 * when doing suspend. Prevent mmc_claim_host in the suspend
-		 * sequence, to potentially wait "forever" by trying to
-		 * pre-claim the host.
-		 */
-		if (mmc_try_claim_host(host)) {
-			if (host->bus_ops->suspend) {
-				err = host->bus_ops->suspend(host);
-			}
-			mmc_release_host(host);
+		if (host->bus_ops->suspend)
+			err = host->bus_ops->suspend(host);
 
-			if (err == -ENOSYS || !host->bus_ops->resume) {
-				/*
-				 * We simply "remove" the card in this case.
-				 * It will be redetected on resume.  (Calling
-				 * bus_ops->remove() with a claimed host can
-				 * deadlock.)
-				 */
-				if (host->bus_ops->remove)
-					host->bus_ops->remove(host);
-				mmc_claim_host(host);
-				mmc_detach_bus(host);
-				mmc_power_off(host);
-				mmc_release_host(host);
-				host->pm_flags = 0;
-				err = 0;
-			}
-		} else {
-			err = -EBUSY;
+		if (err == -ENOSYS || !host->bus_ops->resume) {
+			/*
+			 * We simply "remove" the card in this case.
+			 * It will be redetected on resume.  (Calling
+			 * bus_ops->remove() with a claimed host can
+			 * deadlock.)
+			 */
+			if (host->bus_ops->remove)
+				host->bus_ops->remove(host);
+			mmc_claim_host(host);
+			mmc_detach_bus(host);
+			mmc_power_off(host);
+			mmc_release_host(host);
+			host->pm_flags = 0;
+			err = 0;
 		}
 	}
 	mmc_bus_put(host);