diff options
| author | Adrian Hunter <adrian.hunter@nokia.com> | 2010-08-24 13:20:26 +0300 |
|---|---|---|
| committer | Chris Ball <cjb@laptop.org> | 2010-10-23 21:11:16 +0800 |
| commit | 0f8d8ea64ec7c77ca5beb59534d386fe0235961a (patch) | |
| tree | 8d6aebd250897aa33cb166994720497f40a9aaa6 /drivers/mmc/core/bus.c | |
| parent | dfc13e8402c75e7c2e0a52e123c0500a3259866b (diff) | |
mmc: Fixes for Dual Data Rate (DDR) support
The DDR support patch needs the following fixes:
- The block driver does not need to know about DDR, any more
than it needs to know about bus width.
- Not only the card must be switched to DDR mode. The host
controller must also be configured, which is done through
the 'set_ios()' function.
- Do not set the DDR mode state until after the switch command
is successful.
- Setting block length is not supported in DDR mode. Make that
a core function and change the other place it is used (mmc_test)
also.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'drivers/mmc/core/bus.c')
| -rw-r--r-- | drivers/mmc/core/bus.c | 6 |
1 files changed, 4 insertions, 2 deletions
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index e70bd6641ce..da3c01b214e 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -253,14 +253,16 @@ int mmc_add_card(struct mmc_card *card) } if (mmc_host_is_spi(card->host)) { - printk(KERN_INFO "%s: new %s%s card on SPI\n", + printk(KERN_INFO "%s: new %s%s%s card on SPI\n", mmc_hostname(card->host), mmc_card_highspeed(card) ? "high speed " : "", + mmc_card_ddr_mode(card) ? "DDR " : "", type); } else { - printk(KERN_INFO "%s: new %s%s card at address %04x\n", + printk(KERN_INFO "%s: new %s%s%s card at address %04x\n", mmc_hostname(card->host), mmc_card_highspeed(card) ? "high speed " : "", + mmc_card_ddr_mode(card) ? "DDR " : "", type, card->rca); } |