Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY changes from Greg Kroah-Hartman:
 "As we skipped the merge window for 3.6-rc1 for the tty tree,
  everything is now settled down and working properly, so we are ready
  for 3.7-rc1.  Here's the patchset, it's big, but the large changes are
  removing a firmware file and adding a staging tty driver (it depended
  on the tty core changes, so it's going through this tree instead of
  the staging tree.)

  All of these patches have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up more-or-less trivial conflicts in
 - drivers/char/pcmcia/synclink_cs.c:
    tty NULL dereference fix vs tty_port_cts_enabled() helper function
 - drivers/staging/{Kconfig,Makefile}:
    add-add conflict (dgrp driver added close to other staging drivers)
 - drivers/staging/ipack/devices/ipoctal.c:
    "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device"

* tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits)
  tty/serial: Add kgdb_nmi driver
  tty/serial/amba-pl011: Quiesce interrupts in poll_get_char
  tty/serial/amba-pl011: Implement poll_init callback
  tty/serial/core: Introduce poll_init callback
  kdb: Turn KGDB_KDB=n stubs into static inlines
  kdb: Implement disable_nmi command
  kernel/debug: Mask KGDB NMI upon entry
  serial: pl011: handle corruption at high clock speeds
  serial: sccnxp: Make 'default' choice in switch last
  serial: sccnxp: Remove mask termios caps for SW flow control
  serial: sccnxp: Report actual baudrate back to core
  serial: samsung: Add poll_get_char & poll_put_char
  Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate
  Powerpc 8xx CPM_UART maxidl should not depend on fifo size
  Powerpc 8xx CPM_UART too many interrupts
  Powerpc 8xx CPM_UART desynchronisation
  serial: set correct baud_base for EXSYS EX-41092 Dual 16950
  serial: omap: fix the reciever line error case
  8250: blacklist Winbond CIR port
  8250_pnp: do pnp probe before legacy probe
  ...

2 files changed, 67 insertions, 77 deletions

diff --git a/drivers/misc/ibmasm/uart.c b/drivers/misc/ibmasm/uart.c
index 1dcb9ae1905..01e2b0d7e59 100644
--- a/drivers/misc/ibmasm/uart.c
+++ b/drivers/misc/ibmasm/uart.c
@@ -33,7 +33,7 @@
 
 void ibmasm_register_uart(struct service_processor *sp)
 {
-	struct uart_port uport;
+	struct uart_8250_port uart;
 	void __iomem *iomem_base;
 
 	iomem_base = sp->base_address + SCOUT_COM_B_BASE;
@@ -47,14 +47,14 @@ void ibmasm_register_uart(struct service_processor *sp)
 		return;
 	}
 
-	memset(&uport, 0, sizeof(struct uart_port));
-	uport.irq	= sp->irq;
-	uport.uartclk	= 3686400;
-	uport.flags	= UPF_SHARE_IRQ;
-	uport.iotype	= UPIO_MEM;
-	uport.membase	= iomem_base;
+	memset(&uart, 0, sizeof(uart));
+	uart.port.irq		= sp->irq;
+	uart.port.uartclk	= 3686400;
+	uart.port.flags		= UPF_SHARE_IRQ;
+	uart.port.iotype	= UPIO_MEM;
+	uart.port.membase	= iomem_base;
 
-	sp->serial_line = serial8250_register_port(&uport);
+	sp->serial_line = serial8250_register_8250_port(&uart);
 	if (sp->serial_line < 0) {
 		dev_err(sp->dev, "Failed to register serial port\n");
 		return;
diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c
index b7eb545394b..4999b34b7a6 100644
--- a/drivers/misc/pti.c
+++ b/drivers/misc/pti.c
@@ -60,7 +60,7 @@ struct pti_tty {
 };
 
 struct pti_dev {
-	struct tty_port port;
+	struct tty_port port[PTITTY_MINOR_NUM];
 	unsigned long pti_addr;
 	unsigned long aperture_base;
 	void __iomem *pti_ioaddr;
@@ -76,7 +76,7 @@ struct pti_dev {
  */
 static DEFINE_MUTEX(alloclock);
 
-static struct pci_device_id pci_ids[] __devinitconst = {
+static const struct pci_device_id pci_ids[] __devinitconst = {
 		{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x82B)},
 		{0}
 };
@@ -393,25 +393,6 @@ void pti_writedata(struct pti_masterchannel *mc, u8 *buf, int count)
 }
 EXPORT_SYMBOL_GPL(pti_writedata);
 
-/**
- * pti_pci_remove()- Driver exit method to remove PTI from
- *		   PCI bus.
- * @pdev: variable containing pci info of PTI.
- */
-static void __devexit pti_pci_remove(struct pci_dev *pdev)
-{
-	struct pti_dev *drv_data;
-
-	drv_data = pci_get_drvdata(pdev);
-	if (drv_data != NULL) {
-		pci_iounmap(pdev, drv_data->pti_ioaddr);
-		pci_set_drvdata(pdev, NULL);
-		kfree(drv_data);
-		pci_release_region(pdev, 1);
-		pci_disable_device(pdev);
-	}
-}
-
 /*
  * for the tty_driver_*() basic function descriptions, see tty_driver.h.
  * Specific header comments made for PTI-related specifics.
@@ -446,7 +427,7 @@ static int pti_tty_driver_open(struct tty_struct *tty, struct file *filp)
 	 * also removes a locking requirement for the actual write
 	 * procedure.
 	 */
-	return tty_port_open(&drv_data->port, tty, filp);
+	return tty_port_open(tty->port, tty, filp);
 }
 
 /**
@@ -462,7 +443,7 @@ static int pti_tty_driver_open(struct tty_struct *tty, struct file *filp)
  */
 static void pti_tty_driver_close(struct tty_struct *tty, struct file *filp)
 {
-	tty_port_close(&drv_data->port, tty, filp);
+	tty_port_close(tty->port, tty, filp);
 }
 
 /**
@@ -818,6 +799,7 @@ static const struct tty_port_operations tty_port_ops = {
 static int __devinit pti_pci_probe(struct pci_dev *pdev,
 		const struct pci_device_id *ent)
 {
+	unsigned int a;
 	int retval = -EINVAL;
 	int pci_bar = 1;
 
@@ -830,7 +812,7 @@ static int __devinit pti_pci_probe(struct pci_dev *pdev,
 			__func__, __LINE__);
 		pr_err("%s(%d): Error value returned: %d\n",
 			__func__, __LINE__, retval);
-		return retval;
+		goto err;
 	}
 
 	retval = pci_enable_device(pdev);
@@ -838,17 +820,16 @@ static int __devinit pti_pci_probe(struct pci_dev *pdev,
 		dev_err(&pdev->dev,
 			"%s: pci_enable_device() returned error %d\n",
 			__func__, retval);
-		return retval;
+		goto err_unreg_misc;
 	}
 
 	drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL);
-
 	if (drv_data == NULL) {
 		retval = -ENOMEM;
 		dev_err(&pdev->dev,
 			"%s(%d): kmalloc() returned NULL memory.\n",
 			__func__, __LINE__);
-		return retval;
+		goto err_disable_pci;
 	}
 	drv_data->pti_addr = pci_resource_start(pdev, pci_bar);
 
@@ -857,33 +838,65 @@ static int __devinit pti_pci_probe(struct pci_dev *pdev,
 		dev_err(&pdev->dev,
 			"%s(%d): pci_request_region() returned error %d\n",
 			__func__, __LINE__, retval);
-		kfree(drv_data);
-		return retval;
+		goto err_free_dd;
 	}
 	drv_data->aperture_base = drv_data->pti_addr+APERTURE_14;
 	drv_data->pti_ioaddr =
 		ioremap_nocache((u32)drv_data->aperture_base,
 		APERTURE_LEN);
 	if (!drv_data->pti_ioaddr) {
-		pci_release_region(pdev, pci_bar);
 		retval = -ENOMEM;
-		kfree(drv_data);
-		return retval;
+		goto err_rel_reg;
 	}
 
 	pci_set_drvdata(pdev, drv_data);
 
-	tty_port_init(&drv_data->port);
-	drv_data->port.ops = &tty_port_ops;
+	for (a = 0; a < PTITTY_MINOR_NUM; a++) {
+		struct tty_port *port = &drv_data->port[a];
+		tty_port_init(port);
+		port->ops = &tty_port_ops;
 
-	tty_register_device(pti_tty_driver, 0, &pdev->dev);
-	tty_register_device(pti_tty_driver, 1, &pdev->dev);
+		tty_port_register_device(port, pti_tty_driver, a, &pdev->dev);
+	}
 
 	register_console(&pti_console);
 
+	return 0;
+err_rel_reg:
+	pci_release_region(pdev, pci_bar);
+err_free_dd:
+	kfree(drv_data);
+err_disable_pci:
+	pci_disable_device(pdev);
+err_unreg_misc:
+	misc_deregister(&pti_char_driver);
+err:
 	return retval;
 }
 
+/**
+ * pti_pci_remove()- Driver exit method to remove PTI from
+ *		   PCI bus.
+ * @pdev: variable containing pci info of PTI.
+ */
+static void __devexit pti_pci_remove(struct pci_dev *pdev)
+{
+	struct pti_dev *drv_data = pci_get_drvdata(pdev);
+
+	unregister_console(&pti_console);
+
+	tty_unregister_device(pti_tty_driver, 0);
+	tty_unregister_device(pti_tty_driver, 1);
+
+	iounmap(drv_data->pti_ioaddr);
+	pci_set_drvdata(pdev, NULL);
+	kfree(drv_data);
+	pci_release_region(pdev, 1);
+	pci_disable_device(pdev);
+
+	misc_deregister(&pti_char_driver);
+}
+
 static struct pci_driver pti_pci_driver = {
 	.name		= PCINAME,
 	.id_table	= pci_ids,
@@ -933,25 +946,24 @@ static int __init pti_init(void)
 		pr_err("%s(%d): Error value returned: %d\n",
 			__func__, __LINE__, retval);
 
-		pti_tty_driver = NULL;
-		return retval;
+		goto put_tty;
 	}
 
 	retval = pci_register_driver(&pti_pci_driver);
-
 	if (retval) {
 		pr_err("%s(%d): PCI registration failed of pti driver\n",
 			__func__, __LINE__);
 		pr_err("%s(%d): Error value returned: %d\n",
 			__func__, __LINE__, retval);
-
-		tty_unregister_driver(pti_tty_driver);
-		pr_err("%s(%d): Unregistering TTY part of pti driver\n",
-			__func__, __LINE__);
-		pti_tty_driver = NULL;
-		return retval;
+		goto unreg_tty;
 	}
 
+	return 0;
+unreg_tty:
+	tty_unregister_driver(pti_tty_driver);
+put_tty:
+	put_tty_driver(pti_tty_driver);
+	pti_tty_driver = NULL;
 	return retval;
 }
 
@@ -960,31 +972,9 @@ static int __init pti_init(void)
  */
 static void __exit pti_exit(void)
 {
-	int retval;
-
-	tty_unregister_device(pti_tty_driver, 0);
-	tty_unregister_device(pti_tty_driver, 1);
-
-	retval = tty_unregister_driver(pti_tty_driver);
-	if (retval) {
-		pr_err("%s(%d): TTY unregistration failed of pti driver\n",
-			__func__, __LINE__);
-		pr_err("%s(%d): Error value returned: %d\n",
-			__func__, __LINE__, retval);
-	}
-
+	tty_unregister_driver(pti_tty_driver);
 	pci_unregister_driver(&pti_pci_driver);
-
-	retval = misc_deregister(&pti_char_driver);
-	if (retval) {
-		pr_err("%s(%d): CHAR unregistration failed of pti driver\n",
-			__func__, __LINE__);
-		pr_err("%s(%d): Error value returned: %d\n",
-			__func__, __LINE__, retval);
-	}
-
-	unregister_console(&pti_console);
-	return;
+	put_tty_driver(pti_tty_driver);
 }
 
 module_init(pti_init);