Merge remote branch 'wireless-next/master' into ath6kl-next

Conflicts:
	drivers/net/wireless/ath/ath6kl/init.c

42 files changed, 4126 insertions, 2136 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index a67adcbd0fa..f1391c21ef2 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2,23 +2,8 @@
 # Multifunction miscellaneous devices
 #
 
-menuconfig MFD_SUPPORT
-	bool "Multifunction device drivers"
-	depends on HAS_IOMEM
-	default y
-	help
-	  Multifunction devices embed several functions (e.g. GPIOs,
-	  touchscreens, keyboards, current regulators, power management chips,
-	  etc...) in one single integrated circuit. They usually talk to the
-	  main CPU through one or more IRQ lines and low speed data busses (SPI,
-	  I2C, etc..). They appear as one single device to the main system
-	  through the data bus and the MFD framework allows for sub devices
-	  (a.k.a. functions) to appear as discrete platform devices.
-	  MFDs are typically found on embedded platforms.
-
-	  This option alone does not add any kernel code.
-
-if MFD_SUPPORT
+if HAS_IOMEM
+menu "Multifunction device drivers"
 
 config MFD_CORE
 	tristate
@@ -390,6 +375,7 @@ config MFD_WM8400
 	tristate "Support Wolfson Microelectronics WM8400"
 	select MFD_CORE
 	depends on I2C
+	select REGMAP_I2C
 	help
 	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
 	  CODEC.  This driver provides common support for accessing
@@ -503,6 +489,7 @@ config MFD_WM8994
 config MFD_PCF50633
 	tristate "Support for NXP PCF50633"
 	depends on I2C
+	select REGMAP_I2C
 	help
 	  Say yes here if you have NXP PCF50633 chip on your board.
 	  This core driver provides register access and IRQ handling
@@ -579,6 +566,23 @@ config EZX_PCAP
 	  This enables the PCAP ASIC present on EZX Phones. This is
 	  needed for MMC, TouchScreen, Sound, USB, etc..
 
+config AB5500_CORE
+	bool "ST-Ericsson AB5500 Mixed Signal Power Management chip"
+	depends on ABX500_CORE && MFD_DB5500_PRCMU
+	select MFD_CORE
+	help
+	  Select this option to enable access to AB5500 power management
+	  chip. This connects to the db5500 chip via the I2C bus via PRCMU.
+	  This chip embeds various other multimedia funtionalities as well.
+
+config AB5500_DEBUG
+	bool "Enable debug info via debugfs"
+	depends on AB5500_CORE && DEBUG_FS
+	default y if DEBUG_FS
+	help
+	  Select this option if you want debug information from the AB5500
+	  using the debug filesystem, debugfs.
+
 config AB8500_CORE
 	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
 	depends on GENERIC_HARDIRQS && ABX500_CORE
@@ -615,20 +619,6 @@ config AB8500_GPADC
 	help
 	  AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
 
-config AB3550_CORE
-        bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions"
-	select MFD_CORE
-	depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE
-	help
-	  Select this to enable the AB3550 Mixed Signal IC core
-	  functionality. This connects to a AB3550 on the I2C bus
-	  and expose a number of symbols needed for dependent devices
-	  to read and write registers and subscribe to events from
-	  this multi-functional IC. This is needed to use other features
-	  of the AB3550 such as battery-backed RTC, charging control,
-	  LEDs, vibrator, system power and temperature, power management
-	  and ALSA sound.
-
 config MFD_DB8500_PRCMU
 	bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
 	depends on UX500_SOC_DB8500
@@ -773,7 +763,17 @@ config MFD_AAT2870_CORE
 	  additional drivers must be enabled in order to use the
 	  functionality of the device.
 
-endif # MFD_SUPPORT
+config MFD_INTEL_MSIC
+	bool "Support for Intel MSIC"
+	depends on INTEL_SCU_IPC
+	select MFD_CORE
+	help
+	  Select this option to enable access to Intel MSIC (Avatele
+	  Passage) chip. This chip embeds audio, battery, GPIO, etc.
+	  devices used in Intel Medfield platforms.
+
+endmenu
+endif
 
 menu "Multimedia Capabilities Port drivers"
 	depends on ARCH_SA1100
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c58020303d1..b2292eb7524 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -79,7 +79,8 @@ obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
 obj-$(CONFIG_ABX500_CORE)	+= abx500-core.o
 obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
-obj-$(CONFIG_AB3550_CORE)	+= ab3550-core.o
+obj-$(CONFIG_AB5500_CORE)	+= ab5500-core.o
+obj-$(CONFIG_AB5500_DEBUG)	+= ab5500-debugfs.o
 obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-sysctrl.o
 obj-$(CONFIG_AB8500_DEBUG)	+= ab8500-debugfs.o
 obj-$(CONFIG_AB8500_GPADC)	+= ab8500-gpadc.o
@@ -102,3 +103,4 @@ obj-$(CONFIG_MFD_PM8921_CORE) 	+= pm8921-core.o
 obj-$(CONFIG_MFD_PM8XXX_IRQ) 	+= pm8xxx-irq.o
 obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
 obj-$(CONFIG_MFD_AAT2870_CORE)	+= aat2870-core.o
+obj-$(CONFIG_MFD_INTEL_MSIC)	+= intel_msic.o
diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
index 345dc658ef0..02c42015ba5 100644
--- a/drivers/mfd/aat2870-core.c
+++ b/drivers/mfd/aat2870-core.c
@@ -295,7 +295,7 @@ static ssize_t aat2870_reg_write_file(struct file *file,
 {
 	struct aat2870_data *aat2870 = file->private_data;
 	char buf[32];
-	int buf_size;
+	ssize_t buf_size;
 	char *start = buf;
 	unsigned long addr, val;
 	int ret;
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index a20e1c41bed..60107ee166f 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -12,6 +12,7 @@
 #include <linux/notifier.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
@@ -809,7 +810,7 @@ struct ab_family_id {
 	char	*name;
 };
 
-static const struct ab_family_id ids[] __devinitdata = {
+static const struct ab_family_id ids[] __devinitconst = {
 	/* AB3100 */
 	{
 		.id = 0xc0,
diff --git a/drivers/mfd/ab3550-core.c b/drivers/mfd/ab3550-core.c
deleted file mode 100644
index 56ba1943c91..00000000000
--- a/drivers/mfd/ab3550-core.c
+++ /dev/null
@@ -1,1380 +0,0 @@
-/*
- * Copyright (C) 2007-2010 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Low-level core for exclusive access to the AB3550 IC on the I2C bus
- * and some basic chip-configuration.
- * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
- * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
- * Author: Mattias Wallin <mattias.wallin@stericsson.com>
- * Author: Rickard Andersson <rickard.andersson@stericsson.com>
- */
-
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/random.h>
-#include <linux/workqueue.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/uaccess.h>
-#include <linux/mfd/abx500.h>
-#include <linux/list.h>
-#include <linux/bitops.h>
-#include <linux/spinlock.h>
-#include <linux/mfd/core.h>
-
-#define AB3550_NAME_STRING "ab3550"
-#define AB3550_ID_FORMAT_STRING "AB3550 %s"
-#define AB3550_NUM_BANKS 2
-#define AB3550_NUM_EVENT_REG 5
-
-/* These are the only registers inside AB3550 used in this main file */
-
-/* Chip ID register */
-#define AB3550_CID_REG           0x20
-
-/* Interrupt event registers */
-#define AB3550_EVENT_BANK        0
-#define AB3550_EVENT_REG         0x22
-
-/* Read/write operation values. */
-#define AB3550_PERM_RD (0x01)
-#define AB3550_PERM_WR (0x02)
-
-/* Read/write permissions. */
-#define AB3550_PERM_RO (AB3550_PERM_RD)
-#define AB3550_PERM_RW (AB3550_PERM_RD | AB3550_PERM_WR)
-
-/**
- * struct ab3550
- * @access_mutex: lock out concurrent accesses to the AB registers
- * @i2c_client: I2C client for this chip
- * @chip_name: name of this chip variant
- * @chip_id: 8 bit chip ID for this chip variant
- * @mask_work: a worker for writing to mask registers
- * @event_lock: a lock to protect the event_mask
- * @event_mask: a local copy of the mask event registers
- * @startup_events: a copy of the first reading of the event registers
- * @startup_events_read: whether the first events have been read
- */
-struct ab3550 {
-	struct mutex access_mutex;
-	struct i2c_client *i2c_client[AB3550_NUM_BANKS];
-	char chip_name[32];
-	u8 chip_id;
-	struct work_struct mask_work;
-	spinlock_t event_lock;
-	u8 event_mask[AB3550_NUM_EVENT_REG];
-	u8 startup_events[AB3550_NUM_EVENT_REG];
-	bool startup_events_read;
-#ifdef CONFIG_DEBUG_FS
-	unsigned int debug_bank;
-	unsigned int debug_address;
-#endif
-};
-
-/**
- * struct ab3550_reg_range
- * @first: the first address of the range
- * @last: the last address of the range
- * @perm: access permissions for the range
- */
-struct ab3550_reg_range {
-	u8 first;
-	u8 last;
-	u8 perm;
-};
-
-/**
- * struct ab3550_reg_ranges
- * @count: the number of ranges in the list
- * @range: the list of register ranges
- */
-struct ab3550_reg_ranges {
-	u8 count;
-	const struct ab3550_reg_range *range;
-};
-
-/*
- * Permissible register ranges for reading and writing per device and bank.
- *
- * The ranges must be listed in increasing address order, and no overlaps are
- * allowed. It is assumed that write permission implies read permission
- * (i.e. only RO and RW permissions should be used).  Ranges with write
- * permission must not be split up.
- */
-
-#define NO_RANGE {.count = 0, .range = NULL,}
-
-static struct
-ab3550_reg_ranges ab3550_reg_ranges[AB3550_NUM_DEVICES][AB3550_NUM_BANKS] = {
-	[AB3550_DEVID_DAC] = {
-		NO_RANGE,
-		{
-			.count = 2,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0xb0,
-					.last = 0xba,
-					.perm = AB3550_PERM_RW,
-				},
-				{
-					.first = 0xbc,
-					.last = 0xc3,
-					.perm = AB3550_PERM_RW,
-				},
-			},
-		},
-	},
-	[AB3550_DEVID_LEDS] = {
-		NO_RANGE,
-		{
-			.count = 2,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x5a,
-					.last = 0x88,
-					.perm = AB3550_PERM_RW,
-				},
-				{
-					.first = 0x8a,
-					.last = 0xad,
-					.perm = AB3550_PERM_RW,
-				},
-			}
-		},
-	},
-	[AB3550_DEVID_POWER] = {
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x21,
-					.last = 0x21,
-					.perm = AB3550_PERM_RO,
-				},
-			}
-		},
-		NO_RANGE,
-	},
-	[AB3550_DEVID_REGULATORS] = {
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x69,
-					.last = 0xa3,
-					.perm = AB3550_PERM_RW,
-				},
-			}
-		},
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x14,
-					.last = 0x16,
-					.perm = AB3550_PERM_RW,
-				},
-			}
-		},
-	},
-	[AB3550_DEVID_SIM] = {
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x21,
-					.last = 0x21,
-					.perm = AB3550_PERM_RO,
-				},
-			}
-		},
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x14,
-					.last = 0x17,
-					.perm = AB3550_PERM_RW,
-				},
-			}
-
-		},
-	},
-	[AB3550_DEVID_UART] = {
-		NO_RANGE,
-		NO_RANGE,
-	},
-	[AB3550_DEVID_RTC] = {
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x00,
-					.last = 0x0c,
-					.perm = AB3550_PERM_RW,
-				},
-			}
-		},
-		NO_RANGE,
-	},
-	[AB3550_DEVID_CHARGER] = {
-		{
-			.count = 2,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x10,
-					.last = 0x1a,
-					.perm = AB3550_PERM_RW,
-				},
-				{
-					.first = 0x21,
-					.last = 0x21,
-					.perm = AB3550_PERM_RO,
-				},
-			}
-		},
-		NO_RANGE,
-	},
-	[AB3550_DEVID_ADC] = {
-		NO_RANGE,
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x20,
-					.last = 0x56,
-					.perm = AB3550_PERM_RW,
-				},
-
-			}
-		},
-	},
-	[AB3550_DEVID_FUELGAUGE] = {
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x21,
-					.last = 0x21,
-					.perm = AB3550_PERM_RO,
-				},
-			}
-		},
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x00,
-					.last = 0x0e,
-					.perm = AB3550_PERM_RW,
-				},
-			}
-		},
-	},
-	[AB3550_DEVID_VIBRATOR] = {
-		NO_RANGE,
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x10,
-					.last = 0x13,
-					.perm = AB3550_PERM_RW,
-				},
-
-			}
-		},
-	},
-	[AB3550_DEVID_CODEC] = {
-		{
-			.count = 2,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x31,
-					.last = 0x63,
-					.perm = AB3550_PERM_RW,
-				},
-				{
-					.first = 0x65,
-					.last = 0x68,
-					.perm = AB3550_PERM_RW,
-				},
-			}
-		},
-		NO_RANGE,
-	},
-};
-
-static struct mfd_cell ab3550_devs[AB3550_NUM_DEVICES] = {
-	[AB3550_DEVID_DAC] = {
-		.name = "ab3550-dac",
-		.id = AB3550_DEVID_DAC,
-		.num_resources = 0,
-	},
-	[AB3550_DEVID_LEDS] = {
-		.name = "ab3550-leds",
-		.id = AB3550_DEVID_LEDS,
-	},
-	[AB3550_DEVID_POWER] = {
-		.name = "ab3550-power",
-		.id = AB3550_DEVID_POWER,
-	},
-	[AB3550_DEVID_REGULATORS] = {
-		.name = "ab3550-regulators",
-		.id = AB3550_DEVID_REGULATORS,
-	},
-	[AB3550_DEVID_SIM] = {
-		.name = "ab3550-sim",
-		.id = AB3550_DEVID_SIM,
-	},
-	[AB3550_DEVID_UART] = {
-		.name = "ab3550-uart",
-		.id = AB3550_DEVID_UART,
-	},
-	[AB3550_DEVID_RTC] = {
-		.name = "ab3550-rtc",
-		.id = AB3550_DEVID_RTC,
-	},
-	[AB3550_DEVID_CHARGER] = {
-		.name = "ab3550-charger",
-		.id = AB3550_DEVID_CHARGER,
-	},
-	[AB3550_DEVID_ADC] = {
-		.name = "ab3550-adc",
-		.id = AB3550_DEVID_ADC,
-		.num_resources = 10,
-		.resources = (struct resource[]) {
-			{
-				.name = "TRIGGER-0",
-				.flags = IORESOURCE_IRQ,
-				.start = 16,
-				.end = 16,
-			},
-			{
-				.name = "TRIGGER-1",
-				.flags = IORESOURCE_IRQ,
-				.start = 17,
-				.end = 17,
-			},
-			{
-				.name = "TRIGGER-2",
-				.flags = IORESOURCE_IRQ,
-				.start = 18,
-				.end = 18,
-			},
-			{
-				.name = "TRIGGER-3",
-				.flags = IORESOURCE_IRQ,
-				.start = 19,
-				.end = 19,
-			},
-			{
-				.name = "TRIGGER-4",
-				.flags = IORESOURCE_IRQ,
-				.start = 20,
-				.end = 20,
-			},
-			{
-				.name = "TRIGGER-5",
-				.flags = IORESOURCE_IRQ,
-				.start = 21,
-				.end = 21,
-			},
-			{
-				.name = "TRIGGER-6",
-				.flags = IORESOURCE_IRQ,
-				.start = 22,
-				.end = 22,
-			},
-			{
-				.name = "TRIGGER-7",
-				.flags = IORESOURCE_IRQ,
-				.start = 23,
-				.end = 23,
-			},
-			{
-				.name = "TRIGGER-VBAT-TXON",
-				.flags = IORESOURCE_IRQ,
-				.start = 13,
-				.end = 13,
-			},
-			{
-				.name = "TRIGGER-VBAT",
-				.flags = IORESOURCE_IRQ,
-				.start = 12,
-				.end = 12,
-			},
-		},
-	},
-	[AB3550_DEVID_FUELGAUGE] = {
-		.name = "ab3550-fuelgauge",
-		.id = AB3550_DEVID_FUELGAUGE,
-	},
-	[AB3550_DEVID_VIBRATOR] = {
-		.name = "ab3550-vibrator",
-		.id = AB3550_DEVID_VIBRATOR,
-	},
-	[AB3550_DEVID_CODEC] = {
-		.name = "ab3550-codec",
-		.id = AB3550_DEVID_CODEC,
-	},
-};
-
-/*
- * I2C transactions with error messages.
- */
-static int ab3550_i2c_master_send(struct ab3550 *ab, u8 bank, u8 *data,
-	u8 count)
-{
-	int err;
-
-	err = i2c_master_send(ab->i2c_client[bank], data, count);
-	if (err < 0) {
-		dev_err(&ab->i2c_client[0]->dev, "send error: %d\n", err);
-		return err;
-	}
-	return 0;
-}
-
-static int ab3550_i2c_master_recv(struct ab3550 *ab, u8 bank, u8 *data,
-	u8 count)
-{
-	int err;
-
-	err = i2c_master_recv(ab->i2c_client[bank], data, count);
-	if (err < 0) {
-		dev_err(&ab->i2c_client[0]->dev, "receive error: %d\n", err);
-		return err;
-	}
-	return 0;
-}
-
-/*
- * Functionality for getting/setting register values.
- */
-static int get_register_interruptible(struct ab3550 *ab, u8 bank, u8 reg,
-	u8 *value)
-{
-	int err;
-
-	err = mutex_lock_interruptible(&ab->access_mutex);
-	if (err)
-		return err;
-
-	err = ab3550_i2c_master_send(ab, bank, &reg, 1);
-	if (!err)
-		err = ab3550_i2c_master_recv(ab, bank, value, 1);
-
-	mutex_unlock(&ab->access_mutex);
-	return err;
-}
-
-static int get_register_page_interruptible(struct ab3550 *ab, u8 bank,
-	u8 first_reg, u8 *regvals, u8 numregs)
-{
-	int err;
-
-	err = mutex_lock_interruptible(&ab->access_mutex);
-	if (err)
-		return err;
-
-	err = ab3550_i2c_master_send(ab, bank, &first_reg, 1);
-	if (!err)
-		err = ab3550_i2c_master_recv(ab, bank, regvals, numregs);
-
-	mutex_unlock(&ab->access_mutex);
-	return err;
-}
-
-static int mask_and_set_register_interruptible(struct ab3550 *ab, u8 bank,
-	u8 reg, u8 bitmask, u8 bitvalues)
-{
-	int err = 0;
-
-	if (likely(bitmask)) {
-		u8 reg_bits[2] = {reg, 0};
-
-		err = mutex_lock_interruptible(&ab->access_mutex);
-		if (err)
-			return err;
-
-		if (bitmask == 0xFF) /* No need to read in this case. */
-			reg_bits[1] = bitvalues;
-		else { /* Read and modify the register value. */
-			u8 bits;
-
-			err = ab3550_i2c_master_send(ab, bank, &reg, 1);
-			if (err)
-				goto unlock_and_return;
-			err = ab3550_i2c_master_recv(ab, bank, &bits, 1);
-			if (err)
-				goto unlock_and_return;
-			reg_bits[1] = ((~bitmask & bits) |
-				(bitmask & bitvalues));
-		}
-		/* Write the new value. */
-		err = ab3550_i2c_master_send(ab, bank, reg_bits, 2);
-unlock_and_return:
-		mutex_unlock(&ab->access_mutex);
-	}
-	return err;
-}
-
-/*
- * Read/write permission checking functions.
- */
-static bool page_write_allowed(const struct ab3550_reg_ranges *ranges,
-	u8 first_reg, u8 last_reg)
-{
-	u8 i;
-
-	if (last_reg < first_reg)
-		return false;
-
-	for (i = 0; i < ranges->count; i++) {
-		if (first_reg < ranges->range[i].first)
-			break;
-		if ((last_reg <= ranges->range[i].last) &&
-			(ranges->range[i].perm & AB3550_PERM_WR))
-			return true;
-	}
-	return false;
-}
-
-static bool reg_write_allowed(const struct ab3550_reg_ranges *ranges, u8 reg)
-{
-	return page_write_allowed(ranges, reg, reg);
-}
-
-static bool page_read_allowed(const struct ab3550_reg_ranges *ranges,
-	u8 first_reg, u8 last_reg)
-{
-	u8 i;
-
-	if (last_reg < first_reg)
-		return false;
-	/* Find the range (if it exists in the list) that includes first_reg. */
-	for (i = 0; i < ranges->count; i++) {
-		if (first_reg < ranges->range[i].first)
-			return false;
-		if (first_reg <= ranges->range[i].last)
-			break;
-	}
-	/* Make sure that the entire range up to and including last_reg is
-	 * readable. This may span several of the ranges in the list.
-	 */
-	while ((i < ranges->count) &&
-		(ranges->range[i].perm & AB3550_PERM_RD)) {
-		if (last_reg <= ranges->range[i].last)
-			return true;
-		if ((++i >= ranges->count) ||
-			(ranges->range[i].first !=
-			 (ranges->range[i - 1].last + 1))) {
-			break;
-		}
-	}
-	return false;
-}
-
-static bool reg_read_allowed(const struct ab3550_reg_ranges *ranges, u8 reg)
-{
-	return page_read_allowed(ranges, reg, reg);
-}
-
-/*
- * The register access functionality.
- */
-static int ab3550_get_chip_id(struct device *dev)
-{
-	struct ab3550 *ab = dev_get_drvdata(dev->parent);
-	return (int)ab->chip_id;
-}
-
-static int ab3550_mask_and_set_register_interruptible(struct device *dev,
-	u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
-{
-	struct ab3550 *ab;
-	struct platform_device *pdev = to_platform_device(dev);
-
-	if ((AB3550_NUM_BANKS <= bank) ||
-		!reg_write_allowed(&ab3550_reg_ranges[pdev->id][bank], reg))
-		return -EINVAL;
-
-	ab = dev_get_drvdata(dev->parent);
-	return mask_and_set_register_interruptible(ab, bank, reg,
-		bitmask, bitvalues);
-}
-
-static int ab3550_set_register_interruptible(struct device *dev, u8 bank,
-	u8 reg, u8 value)
-{
-	return ab3550_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
-		value);
-}
-
-static int ab3550_get_register_interruptible(struct device *dev, u8 bank,
-	u8 reg, u8 *value)
-{
-	struct ab3550 *ab;
-	struct platform_device *pdev = to_platform_device(dev);
-
-	if ((AB3550_NUM_BANKS <= bank) ||
-		!reg_read_allowed(&ab3550_reg_ranges[pdev->id][bank], reg))
-		return -EINVAL;
-
-	ab = dev_get_drvdata(dev->parent);
-	return get_register_interruptible(ab, bank, reg, value);
-}
-
-static int ab3550_get_register_page_interruptible(struct device *dev, u8 bank,
-	u8 first_reg, u8 *regvals, u8 numregs)
-{
-	struct ab3550 *ab;
-	struct platform_device *pdev = to_platform_device(dev);
-
-	if ((AB3550_NUM_BANKS <= bank) ||
-		!page_read_allowed(&ab3550_reg_ranges[pdev->id][bank],
-			first_reg, (first_reg + numregs - 1)))
-		return -EINVAL;
-
-	ab = dev_get_drvdata(dev->parent);
-	return get_register_page_interruptible(ab, bank, first_reg, regvals,
-		numregs);
-}
-
-static int ab3550_event_registers_startup_state_get(struct device *dev,
-	u8 *event)
-{
-	struct ab3550 *ab;
-
-	ab = dev_get_drvdata(dev->parent);
-	if (!ab->startup_events_read)
-		return -EAGAIN; /* Try again later */
-
-	memcpy(event, ab->startup_events, AB3550_NUM_EVENT_REG);
-	return 0;
-}
-
-static int ab3550_startup_irq_enabled(struct device *dev, unsigned int irq)
-{
-	struct ab3550 *ab;
-	struct ab3550_platform_data *plf_data;
-	bool val;
-
-	ab = irq_get_chip_data(irq);
-	plf_data = ab->i2c_client[0]->dev.platform_data;
-	irq -= plf_data->irq.base;
-	val = ((ab->startup_events[irq / 8] & BIT(irq % 8)) != 0);
-
-	return val;
-}
-
-static struct abx500_ops ab3550_ops = {
-	.get_chip_id = ab3550_get_chip_id,
-	.get_register = ab3550_get_register_interruptible,
-	.set_register = ab3550_set_register_interruptible,
-	.get_register_page = ab3550_get_register_page_interruptible,
-	.set_register_page = NULL,
-	.mask_and_set_register = ab3550_mask_and_set_register_interruptible,
-	.event_registers_startup_state_get =
-		ab3550_event_registers_startup_state_get,
-	.startup_irq_enabled = ab3550_startup_irq_enabled,
-};
-
-static irqreturn_t ab3550_irq_handler(int irq, void *data)
-{
-	struct ab3550 *ab = data;
-	int err;
-	unsigned int i;
-	u8 e[AB3550_NUM_EVENT_REG];
-	u8 *events;
-	unsigned long flags;
-
-	events = (ab->startup_events_read ? e : ab->startup_events);
-
-	err = get_register_page_interruptible(ab, AB3550_EVENT_BANK,
-		AB3550_EVENT_REG, events, AB3550_NUM_EVENT_REG);
-	if (err)
-		goto err_event_rd;
-
-	if (!ab->startup_events_read) {
-		dev_info(&ab->i2c_client[0]->dev,
-			"startup events 0x%x,0x%x,0x%x,0x%x,0x%x\n",
-			ab->startup_events[0], ab->startup_events[1],
-			ab->startup_events[2], ab->startup_events[3],
-			ab->startup_events[4]);
-		ab->startup_events_read = true;
-		goto out;
-	}
-
-	/* The two highest bits in event[4] are not used. */
-	events[4] &= 0x3f;
-
-	spin_lock_irqsave(&ab->event_lock, flags);
-	for (i = 0; i < AB3550_NUM_EVENT_REG; i++)
-		events[i] &= ~ab->event_mask[i];
-	spin_unlock_irqrestore(&ab->event_lock, flags);
-
-	for (i = 0; i < AB3550_NUM_EVENT_REG; i++) {
-		u8 bit;
-		u8 event_reg;
-
-		dev_dbg(&ab->i2c_client[0]->dev, "IRQ Event[%d]: 0x%2x\n",
-			i, events[i]);
-
-		event_reg = events[i];
-		for (bit = 0; event_reg; bit++, event_reg /= 2) {
-			if (event_reg % 2) {
-				unsigned int irq;
-				struct ab3550_platform_data *plf_data;
-
-				plf_data = ab->i2c_client[0]->dev.platform_data;
-				irq = plf_data->irq.base + (i * 8) + bit;
-				handle_nested_irq(irq);
-			}
-		}
-	}
-out:
-	return IRQ_HANDLED;
-
-err_event_rd:
-	dev_dbg(&ab->i2c_client[0]->dev, "error reading event registers\n");
-	return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_DEBUG_FS
-static struct ab3550_reg_ranges debug_ranges[AB3550_NUM_BANKS] = {
-	{
-		.count = 6,
-		.range = (struct ab3550_reg_range[]) {
-			{
-				.first = 0x00,
-				.last = 0x0e,
-			},
-			{
-				.first = 0x10,
-				.last = 0x1a,
-			},
-			{
-				.first = 0x1e,
-				.last = 0x4f,
-			},
-			{
-				.first = 0x51,
-				.last = 0x63,
-			},
-			{
-				.first = 0x65,
-				.last = 0xa3,
-			},
-			{
-				.first = 0xa5,
-				.last = 0xa8,
-			},
-		}
-	},
-	{
-		.count = 8,
-		.range = (struct ab3550_reg_range[]) {
-			{
-				.first = 0x00,
-				.last = 0x0e,
-			},
-			{
-				.first = 0x10,
-				.last = 0x17,
-			},
-			{
-				.first = 0x1a,
-				.last = 0x1c,
-			},
-			{
-				.first = 0x20,
-				.last = 0x56,
-			},
-			{
-				.first = 0x5a,
-				.last = 0x88,
-			},
-			{
-				.first = 0x8a,
-				.last = 0xad,
-			},
-			{
-				.first = 0xb0,
-				.last = 0xba,
-			},
-			{
-				.first = 0xbc,
-				.last = 0xc3,
-			},
-		}
-	},
-};
-
-static int ab3550_registers_print(struct seq_file *s, void *p)
-{
-	struct ab3550 *ab = s->private;
-	int bank;
-
-	seq_printf(s, AB3550_NAME_STRING " register values:\n");
-
-	for (bank = 0; bank < AB3550_NUM_BANKS; bank++) {
-		unsigned int i;
-
-		seq_printf(s, " bank %d:\n", bank);
-		for (i = 0; i < debug_ranges[bank].count; i++) {
-			u8 reg;
-
-			for (reg = debug_ranges[bank].range[i].first;
-				reg <= debug_ranges[bank].range[i].last;
-				reg++) {
-				u8 value;
-
-				get_register_interruptible(ab, bank, reg,
-					&value);
-				seq_printf(s, "  [%d/0x%02X]: 0x%02X\n", bank,
-					reg, value);
-			}
-		}
-	}
-	return 0;
-}
-
-static int ab3550_registers_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab3550_registers_print, inode->i_private);
-}
-
-static const struct file_operations ab3550_registers_fops = {
-	.open = ab3550_registers_open,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static int ab3550_bank_print(struct seq_file *s, void *p)
-{
-	struct ab3550 *ab = s->private;
-
-	seq_printf(s, "%d\n", ab->debug_bank);
-	return 0;
-}
-
-static int ab3550_bank_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab3550_bank_print, inode->i_private);
-}
-
-static ssize_t ab3550_bank_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_bank;
-	int err;
-
-	/* Get userspace string and assure termination */
-	err = kstrtoul_from_user(user_buf, count, 0, &user_bank);
-	if (err)
-		return err;
-
-	if (user_bank >= AB3550_NUM_BANKS) {
-		dev_err(&ab->i2c_client[0]->dev,
-			"debugfs error input > number of banks\n");
-		return -EINVAL;
-	}
-
-	ab->debug_bank = user_bank;
-
-	return count;
-}
-
-static int ab3550_address_print(struct seq_file *s, void *p)
-{
-	struct ab3550 *ab = s->private;
-
-	seq_printf(s, "0x%02X\n", ab->debug_address);
-	return 0;
-}
-
-static int ab3550_address_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab3550_address_print, inode->i_private);
-}
-
-static ssize_t ab3550_address_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_address;
-	int err;
-
-	/* Get userspace string and assure termination */
-	err = kstrtoul_from_user(user_buf, count, 0, &user_address);
-	if (err)
-		return err;
-
-	if (user_address > 0xff) {
-		dev_err(&ab->i2c_client[0]->dev,
-			"debugfs error input > 0xff\n");
-		return -EINVAL;
-	}
-	ab->debug_address = user_address;
-	return count;
-}
-
-static int ab3550_val_print(struct seq_file *s, void *p)
-{
-	struct ab3550 *ab = s->private;
-	int err;
-	u8 regvalue;
-
-	err = get_register_interruptible(ab, (u8)ab->debug_bank,
-		(u8)ab->debug_address, &regvalue);
-	if (err)
-		return -EINVAL;
-	seq_printf(s, "0x%02X\n", regvalue);
-
-	return 0;
-}
-
-static int ab3550_val_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab3550_val_print, inode->i_private);
-}
-
-static ssize_t ab3550_val_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_val;
-	int err;
-	u8 regvalue;
-
-	/* Get userspace string and assure termination */
-	err = kstrtoul_from_user(user_buf, count, 0, &user_val);
-	if (err)
-		return err;
-
-	if (user_val > 0xff) {
-		dev_err(&ab->i2c_client[0]->dev,
-			"debugfs error input > 0xff\n");
-		return -EINVAL;
-	}
-	err = mask_and_set_register_interruptible(
-		ab, (u8)ab->debug_bank,
-		(u8)ab->debug_address, 0xFF, (u8)user_val);
-	if (err)
-		return -EINVAL;
-
-	get_register_interruptible(ab, (u8)ab->debug_bank,
-		(u8)ab->debug_address, &regvalue);
-	if (err)
-		return -EINVAL;
-
-	return count;
-}
-
-static const struct file_operations ab3550_bank_fops = {
-	.open = ab3550_bank_open,
-	.write = ab3550_bank_write,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static const struct file_operations ab3550_address_fops = {
-	.open = ab3550_address_open,
-	.write = ab3550_address_write,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static const struct file_operations ab3550_val_fops = {
-	.open = ab3550_val_open,
-	.write = ab3550_val_write,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static struct dentry *ab3550_dir;
-static struct dentry *ab3550_reg_file;
-static struct dentry *ab3550_bank_file;
-static struct dentry *ab3550_address_file;
-static struct dentry *ab3550_val_file;
-
-static inline void ab3550_setup_debugfs(struct ab3550 *ab)
-{
-	ab->debug_bank = 0;
-	ab->debug_address = 0x00;
-
-	ab3550_dir = debugfs_create_dir(AB3550_NAME_STRING, NULL);
-	if (!ab3550_dir)
-		goto exit_no_debugfs;
-
-	ab3550_reg_file = debugfs_create_file("all-registers",
-		S_IRUGO, ab3550_dir, ab, &ab3550_registers_fops);
-	if (!ab3550_reg_file)
-		goto exit_destroy_dir;
-
-	ab3550_bank_file = debugfs_create_file("register-bank",
-		(S_IRUGO | S_IWUSR), ab3550_dir, ab, &ab3550_bank_fops);
-	if (!ab3550_bank_file)
-		goto exit_destroy_reg;
-
-	ab3550_address_file = debugfs_create_file("register-address",
-		(S_IRUGO | S_IWUSR), ab3550_dir, ab, &ab3550_address_fops);
-	if (!ab3550_address_file)
-		goto exit_destroy_bank;
-
-	ab3550_val_file = debugfs_create_file("register-value",
-		(S_IRUGO | S_IWUSR), ab3550_dir, ab, &ab3550_val_fops);
-	if (!ab3550_val_file)
-		goto exit_destroy_address;
-
-	return;
-
-exit_destroy_address:
-	debugfs_remove(ab3550_address_file);
-exit_destroy_bank:
-	debugfs_remove(ab3550_bank_file);
-exit_destroy_reg:
-	debugfs_remove(ab3550_reg_file);
-exit_destroy_dir:
-	debugfs_remove(ab3550_dir);
-exit_no_debugfs:
-	dev_err(&ab->i2c_client[0]->dev, "failed to create debugfs entries.\n");
-	return;
-}
-
-static inline void ab3550_remove_debugfs(void)
-{
-	debugfs_remove(ab3550_val_file);
-	debugfs_remove(ab3550_address_file);
-	debugfs_remove(ab3550_bank_file);
-	debugfs_remove(ab3550_reg_file);
-	debugfs_remove(ab3550_dir);
-}
-
-#else /* !CONFIG_DEBUG_FS */
-static inline void ab3550_setup_debugfs(struct ab3550 *ab)
-{
-}
-static inline void ab3550_remove_debugfs(void)
-{
-}
-#endif
-
-/*
- * Basic set-up, datastructure creation/destruction and I2C interface.
- * This sets up a default config in the AB3550 chip so that it
- * will work as expected.
- */
-static int __init ab3550_setup(struct ab3550 *ab)
-{
-	int err = 0;
-	int i;
-	struct ab3550_platform_data *plf_data;
-	struct abx500_init_settings *settings;
-
-	plf_data = ab->i2c_client[0]->dev.platform_data;
-	settings = plf_data->init_settings;
-
-	for (i = 0; i < plf_data->init_settings_sz; i++) {
-		err = mask_and_set_register_interruptible(ab,
-			settings[i].bank,
-			settings[i].reg,
-			0xFF, settings[i].setting);
-		if (err)
-			goto exit_no_setup;
-
-		/* If event mask register update the event mask in ab3550 */
-		if ((settings[i].bank == 0) &&
-			(AB3550_IMR1 <= settings[i].reg) &&
-			(settings[i].reg <= AB3550_IMR5)) {
-			ab->event_mask[settings[i].reg - AB3550_IMR1] =
-				settings[i].setting;
-		}
-	}
-exit_no_setup:
-	return err;
-}
-
-static void ab3550_mask_work(struct work_struct *work)
-{
-	struct ab3550 *ab = container_of(work, struct ab3550, mask_work);
-	int i;
-	unsigned long flags;
-	u8 mask[AB3550_NUM_EVENT_REG];
-
-	spin_lock_irqsave(&ab->event_lock, flags);
-	for (i = 0; i < AB3550_NUM_EVENT_REG; i++)
-		mask[i] = ab->event_mask[i];
-	spin_unlock_irqrestore(&ab->event_lock, flags);
-
-	for (i = 0; i < AB3550_NUM_EVENT_REG; i++) {
-		int err;
-
-		err = mask_and_set_register_interruptible(ab, 0,
-			(AB3550_IMR1 + i), ~0, mask[i]);
-		if (err)
-			dev_err(&ab->i2c_client[0]->dev,
-				"ab3550_mask_work failed 0x%x,0x%x\n",
-				(AB3550_IMR1 + i), mask[i]);
-	}
-}
-
-static void ab3550_mask(struct irq_data *data)
-{
-	unsigned long flags;
-	struct ab3550 *ab;
-	struct ab3550_platform_data *plf_data;
-	int irq;
-
-	ab = irq_data_get_irq_chip_data(data);
-	plf_data = ab->i2c_client[0]->dev.platform_data;
-	irq = data->irq - plf_data->irq.base;
-
-	spin_lock_irqsave(&ab->event_lock, flags);
-	ab->event_mask[irq / 8] |= BIT(irq % 8);
-	spin_unlock_irqrestore(&ab->event_lock, flags);
-
-	schedule_work(&ab->mask_work);
-}
-
-static void ab3550_unmask(struct irq_data *data)
-{
-	unsigned long flags;
-	struct ab3550 *ab;
-	struct ab3550_platform_data *plf_data;
-	int irq;
-
-	ab = irq_data_get_irq_chip_data(data);
-	plf_data = ab->i2c_client[0]->dev.platform_data;
-	irq = data->irq - plf_data->irq.base;
-
-	spin_lock_irqsave(&ab->event_lock, flags);
-	ab->event_mask[irq / 8] &= ~BIT(irq % 8);
-	spin_unlock_irqrestore(&ab->event_lock, flags);
-
-	schedule_work(&ab->mask_work);
-}
-
-static void noop(struct irq_data *data)
-{
-}
-
-static struct irq_chip ab3550_irq_chip = {
-	.name		= "ab3550-core", /* Keep the same name as the request */
-	.irq_disable	= ab3550_mask, /* No default to mask in chip.c */
-	.irq_ack	= noop,
-	.irq_mask	= ab3550_mask,
-	.irq_unmask	= ab3550_unmask,
-};
-
-struct ab_family_id {
-	u8	id;
-	char	*name;
-};
-
-static const struct ab_family_id ids[] __initdata = {
-	/* AB3550 */
-	{
-		.id = AB3550_P1A,
-		.name = "P1A"
-	},
-	/* Terminator */
-	{
-		.id = 0x00,
-	}
-};
-
-static int __init ab3550_probe(struct i2c_client *client,
-	const struct i2c_device_id *id)
-{
-	struct ab3550 *ab;
-	struct ab3550_platform_data *ab3550_plf_data =
-		client->dev.platform_data;
-	int err;
-	int i;
-	int num_i2c_clients = 0;
-
-	ab = kzalloc(sizeof(struct ab3550), GFP_KERNEL);
-	if (!ab) {
-		dev_err(&client->dev,
-			"could not allocate " AB3550_NAME_STRING " device\n");
-		return -ENOMEM;
-	}
-
-	/* Initialize data structure */
-	mutex_init(&ab->access_mutex);
-	spin_lock_init(&ab->event_lock);
-	ab->i2c_client[0] = client;
-
-	i2c_set_clientdata(client, ab);
-
-	/* Read chip ID register */
-	err = get_register_interruptible(ab, 0, AB3550_CID_REG, &ab->chip_id);
-	if (err) {
-		dev_err(&client->dev, "could not communicate with the analog "
-			"baseband chip\n");
-		goto exit_no_detect;
-	}
-
-	for (i = 0; ids[i].id != 0x0; i++) {
-		if (ids[i].id == ab->chip_id) {
-			snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1,
-				AB3550_ID_FORMAT_STRING, ids[i].name);
-			break;
-		}
-	}
-
-	if (ids[i].id == 0x0) {
-		dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
-			ab->chip_id);
-		dev_err(&client->dev, "driver not started!\n");
-		goto exit_no_detect;
-	}
-
-	dev_info(&client->dev, "detected AB chip: %s\n", &ab->chip_name[0]);
-
-	/* Attach other dummy I2C clients. */
-	while (++num_i2c_clients < AB3550_NUM_BANKS) {
-		ab->i2c_client[num_i2c_clients] =
-			i2c_new_dummy(client->adapter,
-				(client->addr + num_i2c_clients));
-		if (!ab->i2c_client[num_i2c_clients]) {
-			err = -ENOMEM;
-			goto exit_no_dummy_client;
-		}
-		strlcpy(ab->i2c_client[num_i2c_clients]->name, id->name,
-			sizeof(ab->i2c_client[num_i2c_clients]->name));
-	}
-
-	err = ab3550_setup(ab);
-	if (err)
-		goto exit_no_setup;
-
-	INIT_WORK(&ab->mask_work, ab3550_mask_work);
-
-	for (i = 0; i < ab3550_plf_data->irq.count; i++) {
-		unsigned int irq;
-
-		irq = ab3550_plf_data->irq.base + i;
-		irq_set_chip_data(irq, ab);
-		irq_set_chip_and_handler(irq, &ab3550_irq_chip,
-					 handle_simple_irq);
-		irq_set_nested_thread(irq, 1);
-#ifdef CONFIG_ARM
-		set_irq_flags(irq, IRQF_VALID);
-#else
-		irq_set_noprobe(irq);
-#endif
-	}
-
-	err = request_threaded_irq(client->irq, NULL, ab3550_irq_handler,
-		IRQF_ONESHOT, "ab3550-core", ab);
-	/* This real unpredictable IRQ is of course sampled for entropy */
-	rand_initialize_irq(client->irq);
-
-	if (err)
-		goto exit_no_irq;
-
-	err = abx500_register_ops(&client->dev, &ab3550_ops);
-	if (err)
-		goto exit_no_ops;
-
-	/* Set up and register the platform devices. */
-	for (i = 0; i < AB3550_NUM_DEVICES; i++) {
-		ab3550_devs[i].platform_data = ab3550_plf_data->dev_data[i];
-		ab3550_devs[i].pdata_size = ab3550_plf_data->dev_data_sz[i];
-	}
-
-	err = mfd_add_devices(&client->dev, 0, ab3550_devs,
-		ARRAY_SIZE(ab3550_devs), NULL,
-		ab3550_plf_data->irq.base);
-
-	ab3550_setup_debugfs(ab);
-
-	return 0;
-
-exit_no_ops:
-exit_no_irq:
-exit_no_setup:
-exit_no_dummy_client:
-	/* Unregister the dummy i2c clients. */
-	while (--num_i2c_clients)
-		i2c_unregister_device(ab->i2c_client[num_i2c_clients]);
-exit_no_detect:
-	kfree(ab);
-	return err;
-}
-
-static int __exit ab3550_remove(struct i2c_client *client)
-{
-	struct ab3550 *ab = i2c_get_clientdata(client);
-	int num_i2c_clients = AB3550_NUM_BANKS;
-
-	mfd_remove_devices(&client->dev);
-	ab3550_remove_debugfs();
-
-	while (--num_i2c_clients)
-		i2c_unregister_device(ab->i2c_client[num_i2c_clients]);
-
-	/*
-	 * At this point, all subscribers should have unregistered
-	 * their notifiers so deactivate IRQ
-	 */
-	free_irq(client->irq, ab);
-	kfree(ab);
-	return 0;
-}
-
-static const struct i2c_device_id ab3550_id[] = {
-	{AB3550_NAME_STRING, 0},
-	{}
-};
-MODULE_DEVICE_TABLE(i2c, ab3550_id);
-
-static struct i2c_driver ab3550_driver = {
-	.driver = {
-		.name	= AB3550_NAME_STRING,
-		.owner	= THIS_MODULE,
-	},
-	.id_table	= ab3550_id,
-	.probe		= ab3550_probe,
-	.remove		= __exit_p(ab3550_remove),
-};
-
-static int __init ab3550_i2c_init(void)
-{
-	return i2c_add_driver(&ab3550_driver);
-}
-
-static void __exit ab3550_i2c_exit(void)
-{
-	i2c_del_driver(&ab3550_driver);
-}
-
-subsys_initcall(ab3550_i2c_init);
-module_exit(ab3550_i2c_exit);
-
-MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
-MODULE_DESCRIPTION("AB3550 core driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c
new file mode 100644
index 00000000000..ec10629a0b0
--- /dev/null
+++ b/drivers/mfd/ab5500-core.c
@@ -0,0 +1,1440 @@
+/*
+ * Copyright (C) 2007-2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level core for exclusive access to the AB5500 IC on the I2C bus
+ * and some basic chip-configuration.
+ * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ * Author: Karl Komierowski  <karl.komierowski@stericsson.com>
+ * Author: Bibek Basu <bibek.basu@stericsson.com>
+ *
+ * TODO: Event handling with irq_chip. Waiting for PRCMU fw support.
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/random.h>
+#include <linux/mfd/ab5500/ab5500.h>
+#include <linux/mfd/abx500.h>
+#include <linux/list.h>
+#include <linux/bitops.h>
+#include <linux/spinlock.h>
+#include <linux/mfd/core.h>
+#include <linux/version.h>
+#include <linux/mfd/db5500-prcmu.h>
+
+#include "ab5500-core.h"
+#include "ab5500-debugfs.h"
+
+#define AB5500_NUM_EVENT_REG 23
+#define AB5500_IT_LATCH0_REG 0x40
+#define AB5500_IT_MASK0_REG 0x60
+
+/*
+ * Permissible register ranges for reading and writing per device and bank.
+ *
+ * The ranges must be listed in increasing address order, and no overlaps are
+ * allowed. It is assumed that write permission implies read permission
+ * (i.e. only RO and RW permissions should be used).  Ranges with write
+ * permission must not be split up.
+ */
+
+#define NO_RANGE {.count = 0, .range = NULL,}
+static struct ab5500_i2c_banks ab5500_bank_ranges[AB5500_NUM_DEVICES] = {
+	[AB5500_DEVID_USB] =  {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_USB,
+				.nranges = 12,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x01,
+						.last = 0x01,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x80,
+						.last = 0x83,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x87,
+						.last = 0x8A,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x8B,
+						.last = 0x8B,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0x91,
+						.last = 0x92,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0x93,
+						.last = 0x93,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x94,
+						.last = 0x94,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0xA8,
+						.last = 0xB0,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0xB2,
+						.last = 0xB2,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0xB4,
+						.last = 0xBC,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0xBF,
+						.last = 0xBF,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0xC1,
+						.last = 0xC5,
+						.perm = AB5500_PERM_RO,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_ADC] =  {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_ADC,
+				.nranges = 6,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x1F,
+						.last = 0x22,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0x23,
+						.last = 0x24,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x26,
+						.last = 0x2D,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0x2F,
+						.last = 0x34,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x37,
+						.last = 0x57,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x58,
+						.last = 0x58,
+						.perm = AB5500_PERM_RO,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_LEDS] =  {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_LED,
+				.nranges = 1,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x00,
+						.last = 0x0C,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_VIDEO] =   {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_VDENC,
+				.nranges = 12,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x00,
+						.last = 0x08,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x09,
+						.last = 0x09,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0x0A,
+						.last = 0x12,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x15,
+						.last = 0x19,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x1B,
+						.last = 0x21,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x27,
+						.last = 0x2C,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x41,
+						.last = 0x41,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x45,
+						.last = 0x5B,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x5D,
+						.last = 0x5D,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x69,
+						.last = 0x69,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x6C,
+						.last = 0x6D,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x80,
+						.last = 0x81,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_REGULATORS] =   {
+		.nbanks = 2,
+		.bank =  (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_STARTUP,
+				.nranges = 12,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x00,
+						.last = 0x01,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x1F,
+						.last = 0x1F,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x2E,
+						.last = 0x2E,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0x2F,
+						.last = 0x30,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x50,
+						.last = 0x51,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x60,
+						.last = 0x61,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x66,
+						.last = 0x8A,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x8C,
+						.last = 0x96,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0xAA,
+						.last = 0xB4,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0xB7,
+						.last = 0xBF,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0xC1,
+						.last = 0xCA,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0xD3,
+						.last = 0xE0,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+			{
+				.bankid = AB5500_BANK_SIM_USBSIM,
+				.nranges = 1,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x13,
+						.last = 0x19,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_SIM] =   {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_SIM_USBSIM,
+				.nranges = 1,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x13,
+						.last = 0x19,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_RTC] =   {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_RTC,
+				.nranges = 2,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x00,
+						.last = 0x04,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x06,
+						.last = 0x0C,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_CHARGER] =   {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_CHG,
+				.nranges = 2,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x11,
+						.last = 0x11,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0x12,
+						.last = 0x1B,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_FUELGAUGE] =   {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_FG_BATTCOM_ACC,
+				.nranges = 2,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x00,
+						.last = 0x0B,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0x0C,
+						.last = 0x10,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_VIBRATOR] =   {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_VIBRA,
+				.nranges = 2,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x10,
+						.last = 0x13,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0xFE,
+						.last = 0xFE,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_CODEC] =   {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_AUDIO_HEADSETUSB,
+				.nranges = 2,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x00,
+						.last = 0x48,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0xEB,
+						.last = 0xFB,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_POWER] = {
+		.nbanks	= 2,
+		.bank	= (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_STARTUP,
+				.nranges = 1,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x30,
+						.last = 0x30,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+			{
+				.bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
+				.nranges = 1,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x01,
+						.last = 0x01,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+};
+
+#define AB5500_IRQ(bank, bit)	((bank) * 8 + (bit))
+
+/* I appologize for the resource names beeing a mix of upper case
+ * and lower case but I want them to be exact as the documentation */
+static struct mfd_cell ab5500_devs[AB5500_NUM_DEVICES] = {
+	[AB5500_DEVID_LEDS] = {
+		.name = "ab5500-leds",
+		.id = AB5500_DEVID_LEDS,
+	},
+	[AB5500_DEVID_POWER] = {
+		.name = "ab5500-power",
+		.id = AB5500_DEVID_POWER,
+	},
+	[AB5500_DEVID_REGULATORS] = {
+		.name = "ab5500-regulator",
+		.id = AB5500_DEVID_REGULATORS,
+	},
+	[AB5500_DEVID_SIM] = {
+		.name = "ab5500-sim",
+		.id = AB5500_DEVID_SIM,
+		.num_resources = 1,
+		.resources = (struct resource[]) {
+			{
+				.name = "SIMOFF",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(2, 0), /*rising*/
+				.end = AB5500_IRQ(2, 1), /*falling*/
+			},
+		},
+	},
+	[AB5500_DEVID_RTC] = {
+		.name = "ab5500-rtc",
+		.id = AB5500_DEVID_RTC,
+		.num_resources = 1,
+		.resources = (struct resource[]) {
+			{
+				.name	= "RTC_Alarm",
+				.flags	= IORESOURCE_IRQ,
+				.start	= AB5500_IRQ(1, 7),
+				.end	= AB5500_IRQ(1, 7),
+			}
+		},
+	},
+	[AB5500_DEVID_CHARGER] = {
+		.name = "ab5500-charger",
+		.id = AB5500_DEVID_CHARGER,
+	},
+	[AB5500_DEVID_ADC] = {
+		.name = "ab5500-adc",
+		.id = AB5500_DEVID_ADC,
+		.num_resources = 10,
+		.resources = (struct resource[]) {
+			{
+				.name = "TRIGGER-0",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 0),
+				.end = AB5500_IRQ(0, 0),
+			},
+			{
+				.name = "TRIGGER-1",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 1),
+				.end = AB5500_IRQ(0, 1),
+			},
+			{
+				.name = "TRIGGER-2",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 2),
+				.end = AB5500_IRQ(0, 2),
+			},
+			{
+				.name = "TRIGGER-3",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 3),
+				.end = AB5500_IRQ(0, 3),
+			},
+			{
+				.name = "TRIGGER-4",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 4),
+				.end = AB5500_IRQ(0, 4),
+			},
+			{
+				.name = "TRIGGER-5",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 5),
+				.end = AB5500_IRQ(0, 5),
+			},
+			{
+				.name = "TRIGGER-6",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 6),
+				.end = AB5500_IRQ(0, 6),
+			},
+			{
+				.name = "TRIGGER-7",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 7),
+				.end = AB5500_IRQ(0, 7),
+			},
+			{
+				.name = "TRIGGER-VBAT",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 8),
+				.end = AB5500_IRQ(0, 8),
+			},
+			{
+				.name = "TRIGGER-VBAT-TXON",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 9),
+				.end = AB5500_IRQ(0, 9),
+			},
+		},
+	},
+	[AB5500_DEVID_FUELGAUGE] = {
+		.name = "ab5500-fuelgauge",
+		.id = AB5500_DEVID_FUELGAUGE,
+		.num_resources = 6,
+		.resources = (struct resource[]) {
+			{
+				.name = "Batt_attach",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(7, 5),
+				.end = AB5500_IRQ(7, 5),
+			},
+			{
+				.name = "Batt_removal",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(7, 6),
+				.end = AB5500_IRQ(7, 6),
+			},
+			{
+				.name = "UART_framing",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(7, 7),
+				.end = AB5500_IRQ(7, 7),
+			},
+			{
+				.name = "UART_overrun",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(8, 0),
+				.end = AB5500_IRQ(8, 0),
+			},
+			{
+				.name = "UART_Rdy_RX",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(8, 1),
+				.end = AB5500_IRQ(8, 1),
+			},
+			{
+				.name = "UART_Rdy_TX",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(8, 2),
+				.end = AB5500_IRQ(8, 2),
+			},
+		},
+	},
+	[AB5500_DEVID_VIBRATOR] = {
+		.name = "ab5500-vibrator",
+		.id = AB5500_DEVID_VIBRATOR,
+	},
+	[AB5500_DEVID_CODEC] = {
+		.name = "ab5500-codec",
+		.id = AB5500_DEVID_CODEC,
+		.num_resources = 3,
+		.resources = (struct resource[]) {
+			{
+				.name = "audio_spkr1_ovc",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(9, 5),
+				.end = AB5500_IRQ(9, 5),
+			},
+			{
+				.name = "audio_plllocked",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(9, 6),
+				.end = AB5500_IRQ(9, 6),
+			},
+			{
+				.name = "audio_spkr2_ovc",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(17, 4),
+				.end = AB5500_IRQ(17, 4),
+			},
+		},
+	},
+	[AB5500_DEVID_USB] = {
+		.name = "ab5500-usb",
+		.id = AB5500_DEVID_USB,
+		.num_resources = 36,
+		.resources = (struct resource[]) {
+			{
+				.name = "Link_Update",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(22, 1),
+				.end = AB5500_IRQ(22, 1),
+			},
+			{
+				.name = "DCIO",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(8, 3),
+				.end = AB5500_IRQ(8, 4),
+			},
+			{
+				.name = "VBUS_R",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(8, 5),
+				.end = AB5500_IRQ(8, 5),
+			},
+			{
+				.name = "VBUS_F",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(8, 6),
+				.end = AB5500_IRQ(8, 6),
+			},
+			{
+				.name = "CHGstate_10_PCVBUSchg",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(8, 7),
+				.end = AB5500_IRQ(8, 7),
+			},
+			{
+				.name = "DCIOreverse_ovc",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(9, 0),
+				.end = AB5500_IRQ(9, 0),
+			},
+			{
+				.name = "USBCharDetDone",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(9, 1),
+				.end = AB5500_IRQ(9, 1),
+			},
+			{
+				.name = "DCIO_no_limit",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(9, 2),
+				.end = AB5500_IRQ(9, 2),
+			},
+			{
+				.name = "USB_suspend",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(9, 3),
+				.end = AB5500_IRQ(9, 3),
+			},
+			{
+				.name = "DCIOreverse_fwdcurrent",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(9, 4),
+				.end = AB5500_IRQ(9, 4),
+			},
+			{
+				.name = "Vbus_Imeasmax_change",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(9, 5),
+				.end = AB5500_IRQ(9, 6),
+			},
+			{
+				.name = "OVV",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(14, 5),
+				.end = AB5500_IRQ(14, 5),
+			},
+			{
+				.name = "USBcharging_NOTok",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(15, 3),
+				.end = AB5500_IRQ(15, 3),
+			},
+			{
+				.name = "usb_adp_sensoroff",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(15, 6),
+				.end = AB5500_IRQ(15, 6),
+			},
+			{
+				.name = "usb_adp_probeplug",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(15, 7),
+				.end = AB5500_IRQ(15, 7),
+			},
+			{
+				.name = "usb_adp_sinkerror",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(16, 0),
+				.end = AB5500_IRQ(16, 6),
+			},
+			{
+				.name = "usb_adp_sourceerror",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(16, 1),
+				.end = AB5500_IRQ(16, 1),
+			},
+			{
+				.name = "usb_idgnd_r",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(16, 2),
+				.end = AB5500_IRQ(16, 2),
+			},
+			{
+				.name = "usb_idgnd_f",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(16, 3),
+				.end = AB5500_IRQ(16, 3),
+			},
+			{
+				.name = "usb_iddetR1",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(16, 4),
+				.end = AB5500_IRQ(16, 5),
+			},
+			{
+				.name = "usb_iddetR2",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(16, 6),
+				.end = AB5500_IRQ(16, 7),
+			},
+			{
+				.name = "usb_iddetR3",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(17, 0),
+				.end = AB5500_IRQ(17, 1),
+			},
+			{
+				.name = "usb_iddetR4",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(17, 2),
+				.end = AB5500_IRQ(17, 3),
+			},
+			{
+				.name = "CharTempWindowOk",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(17, 7),
+				.end = AB5500_IRQ(18, 0),
+			},
+			{
+				.name = "USB_SprDetect",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(18, 1),
+				.end = AB5500_IRQ(18, 1),
+			},
+			{
+				.name = "usb_adp_probe_unplug",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(18, 2),
+				.end = AB5500_IRQ(18, 2),
+			},
+			{
+				.name = "VBUSChDrop",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(18, 3),
+				.end = AB5500_IRQ(18, 4),
+			},
+			{
+				.name = "dcio_char_rec_done",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(18, 5),
+				.end = AB5500_IRQ(18, 5),
+			},
+			{
+				.name = "Charging_stopped_by_temp",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(18, 6),
+				.end = AB5500_IRQ(18, 6),
+			},
+			{
+				.name = "CHGstate_11_SafeModeVBUS",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(21, 1),
+				.end = AB5500_IRQ(21, 2),
+			},
+			{
+				.name = "CHGstate_12_comletedVBUS",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(21, 2),
+				.end = AB5500_IRQ(21, 2),
+			},
+			{
+				.name = "CHGstate_13_completedVBUS",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(21, 3),
+				.end = AB5500_IRQ(21, 3),
+			},
+			{
+				.name = "CHGstate_14_FullChgDCIO",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(21, 4),
+				.end = AB5500_IRQ(21, 4),
+			},
+			{
+				.name = "CHGstate_15_SafeModeDCIO",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(21, 5),
+				.end = AB5500_IRQ(21, 5),
+			},
+			{
+				.name = "CHGstate_16_OFFsuspendDCIO",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(21, 6),
+				.end = AB5500_IRQ(21, 6),
+			},
+			{
+				.name = "CHGstate_17_completedDCIO",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(21, 7),
+				.end = AB5500_IRQ(21, 7),
+			},
+		},
+	},
+	[AB5500_DEVID_OTP] = {
+		.name = "ab5500-otp",
+		.id = AB5500_DEVID_OTP,
+	},
+	[AB5500_DEVID_VIDEO] = {
+		.name = "ab5500-video",
+		.id = AB5500_DEVID_VIDEO,
+		.num_resources = 1,
+		.resources = (struct resource[]) {
+			{
+				.name = "plugTVdet",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(22, 2),
+				.end = AB5500_IRQ(22, 2),
+			},
+		},
+	},
+	[AB5500_DEVID_DBIECI] = {
+		.name = "ab5500-dbieci",
+		.id = AB5500_DEVID_DBIECI,
+		.num_resources = 10,
+		.resources = (struct resource[]) {
+			{
+				.name = "COLL",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(14, 0),
+				.end = AB5500_IRQ(14, 0),
+			},
+			{
+				.name = "RESERR",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(14, 1),
+				.end = AB5500_IRQ(14, 1),
+			},
+			{
+				.name = "FRAERR",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(14, 2),
+				.end = AB5500_IRQ(14, 2),
+			},
+			{
+				.name = "COMERR",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(14, 3),
+				.end = AB5500_IRQ(14, 3),
+			},
+			{
+				.name = "BSI_indicator",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(14, 4),
+				.end = AB5500_IRQ(14, 4),
+			},
+			{
+				.name = "SPDSET",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(14, 6),
+				.end = AB5500_IRQ(14, 6),
+			},
+			{
+				.name = "DSENT",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(14, 7),
+				.end = AB5500_IRQ(14, 7),
+			},
+			{
+				.name = "DREC",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(15, 0),
+				.end = AB5500_IRQ(15, 0),
+			},
+			{
+				.name = "ACCINT",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(15, 1),
+				.end = AB5500_IRQ(15, 1),
+			},
+			{
+				.name = "NOPINT",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(15, 2),
+				.end = AB5500_IRQ(15, 2),
+			},
+		},
+	},
+	[AB5500_DEVID_ONSWA] = {
+		.name = "ab5500-onswa",
+		.id = AB5500_DEVID_ONSWA,
+		.num_resources = 2,
+		.resources = (struct resource[]) {
+			{
+				.name	= "ONSWAn_rising",
+				.flags	= IORESOURCE_IRQ,
+				.start	= AB5500_IRQ(1, 3),
+				.end	= AB5500_IRQ(1, 3),
+			},
+			{
+				.name	= "ONSWAn_falling",
+				.flags	= IORESOURCE_IRQ,
+				.start	= AB5500_IRQ(1, 4),
+				.end	= AB5500_IRQ(1, 4),
+			},
+		},
+	},
+};
+
+/*
+ * Functionality for getting/setting register values.
+ */
+int ab5500_get_register_interruptible_raw(struct ab5500 *ab,
+					  u8 bank, u8 reg,
+					  u8 *value)
+{
+	int err;
+
+	if (bank >= AB5500_NUM_BANKS)
+		return -EINVAL;
+
+	err = mutex_lock_interruptible(&ab->access_mutex);
+	if (err)
+		return err;
+	err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, reg, value, 1);
+
+	mutex_unlock(&ab->access_mutex);
+	return err;
+}
+
+static int get_register_page_interruptible(struct ab5500 *ab, u8 bank,
+	u8 first_reg, u8 *regvals, u8 numregs)
+{
+	int err;
+
+	if (bank >= AB5500_NUM_BANKS)
+		return -EINVAL;
+
+	err = mutex_lock_interruptible(&ab->access_mutex);
+	if (err)
+		return err;
+
+	while (numregs) {
+		/* The hardware limit for get page is 4 */
+		u8 curnum = min_t(u8, numregs, 4u);
+
+		err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
+					    first_reg, regvals, curnum);
+		if (err)
+			goto out;
+
+		numregs -= curnum;
+		first_reg += curnum;
+		regvals += curnum;
+	}
+
+out:
+	mutex_unlock(&ab->access_mutex);
+	return err;
+}
+
+int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
+	u8 reg, u8 bitmask, u8 bitvalues)
+{
+	int err = 0;
+
+	if (bank >= AB5500_NUM_BANKS)
+		return -EINVAL;
+
+	if (bitmask) {
+		u8 buf;
+
+		err = mutex_lock_interruptible(&ab->access_mutex);
+		if (err)
+			return err;
+
+		if (bitmask == 0xFF) /* No need to read in this case. */
+			buf = bitvalues;
+		else { /* Read and modify the register value. */
+			err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
+				reg, &buf, 1);
+			if (err)
+				return err;
+
+			buf = ((~bitmask & buf) | (bitmask & bitvalues));
+		}
+		/* Write the new value. */
+		err = db5500_prcmu_abb_write(bankinfo[bank].slave_addr, reg,
+					     &buf, 1);
+
+		mutex_unlock(&ab->access_mutex);
+	}
+	return err;
+}
+
+static int
+set_register_interruptible(struct ab5500 *ab, u8 bank, u8 reg, u8 value)
+{
+	return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg,
+							      0xff, value);
+}
+
+/*
+ * Read/write permission checking functions.
+ */
+static const struct ab5500_i2c_ranges *get_bankref(u8 devid, u8 bank)
+{
+	u8 i;
+
+	if (devid < AB5500_NUM_DEVICES) {
+		for (i = 0; i < ab5500_bank_ranges[devid].nbanks; i++) {
+			if (ab5500_bank_ranges[devid].bank[i].bankid == bank)
+				return &ab5500_bank_ranges[devid].bank[i];
+		}
+	}
+	return NULL;
+}
+
+static bool page_write_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
+{
+	u8 i; /* range loop index */
+	const struct ab5500_i2c_ranges *bankref;
+
+	bankref = get_bankref(devid, bank);
+	if (bankref == NULL || last_reg < first_reg)
+		return false;
+
+	for (i = 0; i < bankref->nranges; i++) {
+		if (first_reg < bankref->range[i].first)
+			break;
+		if ((last_reg <= bankref->range[i].last) &&
+			(bankref->range[i].perm & AB5500_PERM_WR))
+			return true;
+	}
+	return false;
+}
+
+static bool reg_write_allowed(u8 devid, u8 bank, u8 reg)
+{
+	return page_write_allowed(devid, bank, reg, reg);
+}
+
+static bool page_read_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
+{
+	u8 i;
+	const struct ab5500_i2c_ranges *bankref;
+
+	bankref = get_bankref(devid, bank);
+	if (bankref == NULL || last_reg < first_reg)
+		return false;
+
+
+	/* Find the range (if it exists in the list) that includes first_reg. */
+	for (i = 0; i < bankref->nranges; i++) {
+		if (first_reg < bankref->range[i].first)
+			return false;
+		if (first_reg <= bankref->range[i].last)
+			break;
+	}
+	/* Make sure that the entire range up to and including last_reg is
+	 * readable. This may span several of the ranges in the list.
+	 */
+	while ((i < bankref->nranges) &&
+		(bankref->range[i].perm & AB5500_PERM_RD)) {
+		if (last_reg <= bankref->range[i].last)
+			return true;
+		if ((++i >= bankref->nranges) ||
+			(bankref->range[i].first !=
+				(bankref->range[i - 1].last + 1))) {
+			break;
+		}
+	}
+	return false;
+}
+
+static bool reg_read_allowed(u8 devid, u8 bank, u8 reg)
+{
+	return page_read_allowed(devid, bank, reg, reg);
+}
+
+
+/*
+ * The exported register access functionality.
+ */
+static int ab5500_get_chip_id(struct device *dev)
+{
+	struct ab5500 *ab = dev_get_drvdata(dev->parent);
+
+	return (int)ab->chip_id;
+}
+
+static int ab5500_mask_and_set_register_interruptible(struct device *dev,
+		u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
+{
+	struct ab5500 *ab;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if ((AB5500_NUM_BANKS <= bank) ||
+		!reg_write_allowed(pdev->id, bank, reg))
+		return -EINVAL;
+
+	ab = dev_get_drvdata(dev->parent);
+	return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg,
+		bitmask, bitvalues);
+}
+
+static int ab5500_set_register_interruptible(struct device *dev, u8 bank,
+	u8 reg, u8 value)
+{
+	return ab5500_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
+		value);
+}
+
+static int ab5500_get_register_interruptible(struct device *dev, u8 bank,
+		u8 reg, u8 *value)
+{
+	struct ab5500 *ab;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if ((AB5500_NUM_BANKS <= bank) ||
+		!reg_read_allowed(pdev->id, bank, reg))
+		return -EINVAL;
+
+	ab = dev_get_drvdata(dev->parent);
+	return ab5500_get_register_interruptible_raw(ab, bank, reg, value);
+}
+
+static int ab5500_get_register_page_interruptible(struct device *dev, u8 bank,
+		u8 first_reg, u8 *regvals, u8 numregs)
+{
+	struct ab5500 *ab;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if ((AB5500_NUM_BANKS <= bank) ||
+		!page_read_allowed(pdev->id, bank,
+			first_reg, (first_reg + numregs - 1)))
+		return -EINVAL;
+
+	ab = dev_get_drvdata(dev->parent);
+	return get_register_page_interruptible(ab, bank, first_reg, regvals,
+		numregs);
+}
+
+static int
+ab5500_event_registers_startup_state_get(struct device *dev, u8 *event)
+{
+	struct ab5500 *ab;
+
+	ab = dev_get_drvdata(dev->parent);
+	if (!ab->startup_events_read)
+		return -EAGAIN; /* Try again later */
+
+	memcpy(event, ab->startup_events, AB5500_NUM_EVENT_REG);
+	return 0;
+}
+
+static struct abx500_ops ab5500_ops = {
+	.get_chip_id = ab5500_get_chip_id,
+	.get_register = ab5500_get_register_interruptible,
+	.set_register = ab5500_set_register_interruptible,
+	.get_register_page = ab5500_get_register_page_interruptible,
+	.set_register_page = NULL,
+	.mask_and_set_register = ab5500_mask_and_set_register_interruptible,
+	.event_registers_startup_state_get =
+		ab5500_event_registers_startup_state_get,
+	.startup_irq_enabled = NULL,
+};
+
+/*
+ * ab5500_setup : Basic set-up, datastructure creation/destruction
+ *		  and I2C interface.This sets up a default config
+ *		  in the AB5500 chip so that it will work as expected.
+ * @ab :	  Pointer to ab5500 structure
+ * @settings :    Pointer to struct abx500_init_settings
+ * @size :        Size of init data
+ */
+static int __init ab5500_setup(struct ab5500 *ab,
+	struct abx500_init_settings *settings, unsigned int size)
+{
+	int err = 0;
+	int i;
+
+	for (i = 0; i < size; i++) {
+		err = ab5500_mask_and_set_register_interruptible_raw(ab,
+			settings[i].bank,
+			settings[i].reg,
+			0xFF, settings[i].setting);
+		if (err)
+			goto exit_no_setup;
+
+		/* If event mask register update the event mask in ab5500 */
+		if ((settings[i].bank == AB5500_BANK_IT) &&
+			(AB5500_MASK_BASE <= settings[i].reg) &&
+			(settings[i].reg <= AB5500_MASK_END)) {
+			ab->mask[settings[i].reg - AB5500_MASK_BASE] =
+				settings[i].setting;
+		}
+	}
+exit_no_setup:
+	return err;
+}
+
+struct ab_family_id {
+	u8	id;
+	char	*name;
+};
+
+static const struct ab_family_id ids[] __initdata = {
+	/* AB5500 */
+	{
+		.id = AB5500_1_0,
+		.name = "1.0"
+	},
+	{
+		.id = AB5500_1_1,
+		.name = "1.1"
+	},
+	/* Terminator */
+	{
+		.id = 0x00,
+	}
+};
+
+static int __init ab5500_probe(struct platform_device *pdev)
+{
+	struct ab5500 *ab;
+	struct ab5500_platform_data *ab5500_plf_data =
+		pdev->dev.platform_data;
+	int err;
+	int i;
+
+	ab = kzalloc(sizeof(struct ab5500), GFP_KERNEL);
+	if (!ab) {
+		dev_err(&pdev->dev,
+			"could not allocate ab5500 device\n");
+		return -ENOMEM;
+	}
+
+	/* Initialize data structure */
+	mutex_init(&ab->access_mutex);
+	mutex_init(&ab->irq_lock);
+	ab->dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, ab);
+
+	/* Read chip ID register */
+	err = ab5500_get_register_interruptible_raw(ab,
+					AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
+					AB5500_CHIP_ID, &ab->chip_id);
+	if (err) {
+		dev_err(&pdev->dev, "could not communicate with the analog "
+			"baseband chip\n");
+		goto exit_no_detect;
+	}
+
+	for (i = 0; ids[i].id != 0x0; i++) {
+		if (ids[i].id == ab->chip_id) {
+			snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1,
+				"AB5500 %s", ids[i].name);
+			break;
+		}
+	}
+	if (ids[i].id == 0x0) {
+		dev_err(&pdev->dev, "unknown analog baseband chip id: 0x%x\n",
+			ab->chip_id);
+		dev_err(&pdev->dev, "driver not started!\n");
+		goto exit_no_detect;
+	}
+
+	/* Clear and mask all interrupts */
+	for (i = 0; i < AB5500_NUM_IRQ_REGS; i++) {
+		u8 latchreg = AB5500_IT_LATCH0_REG + i;
+		u8 maskreg = AB5500_IT_MASK0_REG + i;
+		u8 val;
+
+		ab5500_get_register_interruptible_raw(ab, AB5500_BANK_IT,
+						      latchreg, &val);
+		set_register_interruptible(ab, AB5500_BANK_IT, maskreg, 0xff);
+		ab->mask[i] = ab->oldmask[i] = 0xff;
+	}
+
+	err = abx500_register_ops(&pdev->dev, &ab5500_ops);
+	if (err) {
+		dev_err(&pdev->dev, "ab5500_register ops error\n");
+		goto exit_no_detect;
+	}
+
+	/* Set up and register the platform devices. */
+	for (i = 0; i < AB5500_NUM_DEVICES; i++) {
+		ab5500_devs[i].platform_data = ab5500_plf_data->dev_data[i];
+		ab5500_devs[i].pdata_size =
+			sizeof(ab5500_plf_data->dev_data[i]);
+	}
+
+	err = mfd_add_devices(&pdev->dev, 0, ab5500_devs,
+		ARRAY_SIZE(ab5500_devs), NULL,
+		ab5500_plf_data->irq.base);
+	if (err) {
+		dev_err(&pdev->dev, "ab5500_mfd_add_device error\n");
+		goto exit_no_detect;
+	}
+
+	err = ab5500_setup(ab, ab5500_plf_data->init_settings,
+		ab5500_plf_data->init_settings_sz);
+	if (err) {
+		dev_err(&pdev->dev, "ab5500_setup error\n");
+		goto exit_no_detect;
+	}
+
+	ab5500_setup_debugfs(ab);
+
+	dev_info(&pdev->dev, "detected AB chip: %s\n", &ab->chip_name[0]);
+	return 0;
+
+exit_no_detect:
+	kfree(ab);
+	return err;
+}
+
+static int __exit ab5500_remove(struct platform_device *pdev)
+{
+	struct ab5500 *ab = platform_get_drvdata(pdev);
+
+	ab5500_remove_debugfs();
+	mfd_remove_devices(&pdev->dev);
+	kfree(ab);
+	return 0;
+}
+
+static struct platform_driver ab5500_driver = {
+	.driver = {
+		.name = "ab5500-core",
+		.owner = THIS_MODULE,
+	},
+	.remove  = __exit_p(ab5500_remove),
+};
+
+static int __init ab5500_core_init(void)
+{
+	return platform_driver_probe(&ab5500_driver, ab5500_probe);
+}
+
+static void __exit ab5500_core_exit(void)
+{
+	platform_driver_unregister(&ab5500_driver);
+}
+
+subsys_initcall(ab5500_core_init);
+module_exit(ab5500_core_exit);
+
+MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
+MODULE_DESCRIPTION("AB5500 core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ab5500-core.h b/drivers/mfd/ab5500-core.h
new file mode 100644
index 00000000000..63b30b17e4f
--- /dev/null
+++ b/drivers/mfd/ab5500-core.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Shared definitions and data structures for the AB5500 MFD driver
+ */
+
+/* Read/write operation values. */
+#define AB5500_PERM_RD (0x01)
+#define AB5500_PERM_WR (0x02)
+
+/* Read/write permissions. */
+#define AB5500_PERM_RO (AB5500_PERM_RD)
+#define AB5500_PERM_RW (AB5500_PERM_RD | AB5500_PERM_WR)
+
+#define AB5500_MASK_BASE (0x60)
+#define AB5500_MASK_END (0x79)
+#define AB5500_CHIP_ID (0x20)
+
+/**
+ * struct ab5500_reg_range
+ * @first: the first address of the range
+ * @last: the last address of the range
+ * @perm: access permissions for the range
+ */
+struct ab5500_reg_range {
+	u8 first;
+	u8 last;
+	u8 perm;
+};
+
+/**
+ * struct ab5500_i2c_ranges
+ * @count: the number of ranges in the list
+ * @range: the list of register ranges
+ */
+struct ab5500_i2c_ranges {
+	u8 nranges;
+	u8 bankid;
+	const struct ab5500_reg_range *range;
+};
+
+/**
+ * struct ab5500_i2c_banks
+ * @count: the number of ranges in the list
+ * @range: the list of register ranges
+ */
+struct ab5500_i2c_banks {
+	u8 nbanks;
+	const struct ab5500_i2c_ranges *bank;
+};
+
+/**
+ * struct ab5500_bank
+ * @slave_addr: I2C slave_addr found in AB5500 specification
+ * @name: Documentation name of the bank. For reference
+ */
+struct ab5500_bank {
+	u8 slave_addr;
+	const char *name;
+};
+
+static const struct ab5500_bank bankinfo[AB5500_NUM_BANKS] = {
+	[AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
+		AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP, "VIT_IO_I2C_CLK_TST_OTP"},
+	[AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
+		AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST, "VDDDIG_IO_I2C_CLK_TST"},
+	[AB5500_BANK_VDENC] = {AB5500_ADDR_VDENC, "VDENC"},
+	[AB5500_BANK_SIM_USBSIM] = {AB5500_ADDR_SIM_USBSIM, "SIM_USBSIM"},
+	[AB5500_BANK_LED] = {AB5500_ADDR_LED, "LED"},
+	[AB5500_BANK_ADC] = {AB5500_ADDR_ADC, "ADC"},
+	[AB5500_BANK_RTC] = {AB5500_ADDR_RTC, "RTC"},
+	[AB5500_BANK_STARTUP] = {AB5500_ADDR_STARTUP, "STARTUP"},
+	[AB5500_BANK_DBI_ECI] = {AB5500_ADDR_DBI_ECI, "DBI-ECI"},
+	[AB5500_BANK_CHG] = {AB5500_ADDR_CHG, "CHG"},
+	[AB5500_BANK_FG_BATTCOM_ACC] = {
+		AB5500_ADDR_FG_BATTCOM_ACC, "FG_BATCOM_ACC"},
+	[AB5500_BANK_USB] = {AB5500_ADDR_USB, "USB"},
+	[AB5500_BANK_IT] = {AB5500_ADDR_IT, "IT"},
+	[AB5500_BANK_VIBRA] = {AB5500_ADDR_VIBRA, "VIBRA"},
+	[AB5500_BANK_AUDIO_HEADSETUSB] = {
+		AB5500_ADDR_AUDIO_HEADSETUSB, "AUDIO_HEADSETUSB"},
+};
+
+int ab5500_get_register_interruptible_raw(struct ab5500 *ab, u8 bank, u8 reg,
+	u8 *value);
+int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
+	u8 reg, u8 bitmask, u8 bitvalues);
diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c
new file mode 100644
index 00000000000..43c0ebb8195
--- /dev/null
+++ b/drivers/mfd/ab5500-debugfs.c
@@ -0,0 +1,807 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Debugfs support for the AB5500 MFD driver
+ */
+
+#include <linux/export.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/mfd/ab5500/ab5500.h>
+#include <linux/mfd/abx500.h>
+#include <linux/uaccess.h>
+
+#include "ab5500-core.h"
+#include "ab5500-debugfs.h"
+
+static struct ab5500_i2c_ranges ab5500_reg_ranges[AB5500_NUM_BANKS] = {
+	[AB5500_BANK_LED] = {
+		.bankid = AB5500_BANK_LED,
+		.nranges = 1,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x0C,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_ADC] = {
+		.bankid = AB5500_BANK_ADC,
+		.nranges = 6,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x1F,
+				.last = 0x22,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x23,
+				.last = 0x24,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x26,
+				.last = 0x2D,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x2F,
+				.last = 0x34,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x37,
+				.last = 0x57,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x58,
+				.last = 0x58,
+				.perm = AB5500_PERM_RO,
+			},
+		},
+	},
+	[AB5500_BANK_RTC] = {
+		.bankid = AB5500_BANK_RTC,
+		.nranges = 2,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x04,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x06,
+				.last = 0x0C,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_STARTUP] = {
+		.bankid = AB5500_BANK_STARTUP,
+		.nranges = 12,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x01,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x1F,
+				.last = 0x1F,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x2E,
+				.last = 0x2E,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x2F,
+				.last = 0x30,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x50,
+				.last = 0x51,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x60,
+				.last = 0x61,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x66,
+				.last = 0x8A,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x8C,
+				.last = 0x96,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0xAA,
+				.last = 0xB4,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0xB7,
+				.last = 0xBF,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0xC1,
+				.last = 0xCA,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0xD3,
+				.last = 0xE0,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_DBI_ECI] = {
+		.bankid = AB5500_BANK_DBI_ECI,
+		.nranges = 3,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x07,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x10,
+				.last = 0x10,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x13,
+				.last = 0x13,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_CHG] = {
+		.bankid = AB5500_BANK_CHG,
+		.nranges = 2,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x11,
+				.last = 0x11,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x12,
+				.last = 0x1B,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_FG_BATTCOM_ACC] = {
+		.bankid = AB5500_BANK_FG_BATTCOM_ACC,
+		.nranges = 2,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x0B,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x0C,
+				.last = 0x10,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_USB] = {
+		.bankid = AB5500_BANK_USB,
+		.nranges = 12,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x01,
+				.last = 0x01,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x80,
+				.last = 0x83,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x87,
+				.last = 0x8A,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x8B,
+				.last = 0x8B,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x91,
+				.last = 0x92,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x93,
+				.last = 0x93,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x94,
+				.last = 0x94,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0xA8,
+				.last = 0xB0,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0xB2,
+				.last = 0xB2,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0xB4,
+				.last = 0xBC,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0xBF,
+				.last = 0xBF,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0xC1,
+				.last = 0xC5,
+				.perm = AB5500_PERM_RO,
+			},
+		},
+	},
+	[AB5500_BANK_IT] = {
+		.bankid = AB5500_BANK_IT,
+		.nranges = 4,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x02,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x20,
+				.last = 0x36,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x40,
+				.last = 0x56,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x60,
+				.last = 0x76,
+				.perm = AB5500_PERM_RO,
+			},
+		},
+	},
+	[AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
+		.bankid = AB5500_BANK_VDDDIG_IO_I2C_CLK_TST,
+		.nranges = 7,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x02,
+				.last = 0x02,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x12,
+				.last = 0x12,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x30,
+				.last = 0x34,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x40,
+				.last = 0x44,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x50,
+				.last = 0x54,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x60,
+				.last = 0x64,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x70,
+				.last = 0x74,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
+		.bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
+		.nranges = 13,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x01,
+				.last = 0x01,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x02,
+				.last = 0x02,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x0D,
+				.last = 0x0F,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x1C,
+				.last = 0x1C,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x1E,
+				.last = 0x1E,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x20,
+				.last = 0x21,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x25,
+				.last = 0x25,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x28,
+				.last = 0x2A,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x30,
+				.last = 0x33,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x40,
+				.last = 0x43,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x50,
+				.last = 0x53,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x60,
+				.last = 0x63,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x70,
+				.last = 0x73,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_VIBRA] = {
+		.bankid = AB5500_BANK_VIBRA,
+		.nranges = 2,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x10,
+				.last = 0x13,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0xFE,
+				.last = 0xFE,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_AUDIO_HEADSETUSB] = {
+		.bankid = AB5500_BANK_AUDIO_HEADSETUSB,
+		.nranges = 2,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x48,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0xEB,
+				.last = 0xFB,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_SIM_USBSIM] = {
+		.bankid = AB5500_BANK_SIM_USBSIM,
+		.nranges = 1,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x13,
+				.last = 0x19,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_VDENC] = {
+		.bankid = AB5500_BANK_VDENC,
+		.nranges = 12,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x08,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x09,
+				.last = 0x09,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x0A,
+				.last = 0x12,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x15,
+				.last = 0x19,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x1B,
+				.last = 0x21,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x27,
+				.last = 0x2C,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x41,
+				.last = 0x41,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x45,
+				.last = 0x5B,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x5D,
+				.last = 0x5D,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x69,
+				.last = 0x69,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x6C,
+				.last = 0x6D,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x80,
+				.last = 0x81,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+};
+
+static int ab5500_registers_print(struct seq_file *s, void *p)
+{
+	struct ab5500 *ab = s->private;
+	unsigned int i;
+	u8 bank = (u8)ab->debug_bank;
+
+	seq_printf(s, "ab5500 register values:\n");
+	for (bank = 0; bank < AB5500_NUM_BANKS; bank++) {
+		seq_printf(s, " bank %u, %s (0x%x):\n", bank,
+				bankinfo[bank].name,
+				bankinfo[bank].slave_addr);
+		for (i = 0; i < ab5500_reg_ranges[bank].nranges; i++) {
+			u8 reg;
+			int err;
+
+			for (reg = ab5500_reg_ranges[bank].range[i].first;
+				reg <= ab5500_reg_ranges[bank].range[i].last;
+				reg++) {
+				u8 value;
+
+				err = ab5500_get_register_interruptible_raw(ab,
+								bank, reg,
+								&value);
+				if (err < 0) {
+					dev_err(ab->dev, "get_reg failed %d"
+						"bank 0x%x reg 0x%x\n",
+						err, bank, reg);
+					return err;
+				}
+
+				err = seq_printf(s, "[%d/0x%02X]: 0x%02X\n",
+						bank, reg, value);
+				if (err < 0) {
+					dev_err(ab->dev,
+						"seq_printf overflow\n");
+					/*
+					 * Error is not returned here since
+					 * the output is wanted in any case
+					 */
+					return 0;
+				}
+			}
+		}
+	}
+	return 0;
+}
+
+static int ab5500_registers_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab5500_registers_print, inode->i_private);
+}
+
+static const struct file_operations ab5500_registers_fops = {
+	.open = ab5500_registers_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab5500_bank_print(struct seq_file *s, void *p)
+{
+	struct ab5500 *ab = s->private;
+
+	seq_printf(s, "%d\n", ab->debug_bank);
+	return 0;
+}
+
+static int ab5500_bank_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab5500_bank_print, inode->i_private);
+}
+
+static ssize_t ab5500_bank_write(struct file *file,
+	const char __user *user_buf,
+	size_t count, loff_t *ppos)
+{
+	struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
+	char buf[32];
+	int buf_size;
+	unsigned long user_bank;
+	int err;
+
+	/* Get userspace string and assure termination */
+	buf_size = min(count, (sizeof(buf) - 1));
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	err = strict_strtoul(buf, 0, &user_bank);
+	if (err)
+		return -EINVAL;
+
+	if (user_bank >= AB5500_NUM_BANKS) {
+		dev_err(ab->dev,
+			"debugfs error input > number of banks\n");
+		return -EINVAL;
+	}
+
+	ab->debug_bank = user_bank;
+
+	return buf_size;
+}
+
+static int ab5500_address_print(struct seq_file *s, void *p)
+{
+	struct ab5500 *ab = s->private;
+
+	seq_printf(s, "0x%02X\n", ab->debug_address);
+	return 0;
+}
+
+static int ab5500_address_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab5500_address_print, inode->i_private);
+}
+
+static ssize_t ab5500_address_write(struct file *file,
+	const char __user *user_buf,
+	size_t count, loff_t *ppos)
+{
+	struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
+	char buf[32];
+	int buf_size;
+	unsigned long user_address;
+	int err;
+
+	/* Get userspace string and assure termination */
+	buf_size = min(count, (sizeof(buf) - 1));
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	err = strict_strtoul(buf, 0, &user_address);
+	if (err)
+		return -EINVAL;
+	if (user_address > 0xff) {
+		dev_err(ab->dev,
+			"debugfs error input > 0xff\n");
+		return -EINVAL;
+	}
+	ab->debug_address = user_address;
+	return buf_size;
+}
+
+static int ab5500_val_print(struct seq_file *s, void *p)
+{
+	struct ab5500 *ab = s->private;
+	int err;
+	u8 regvalue;
+
+	err = ab5500_get_register_interruptible_raw(ab, (u8)ab->debug_bank,
+		(u8)ab->debug_address, &regvalue);
+	if (err) {
+		dev_err(ab->dev, "get_reg failed %d, bank 0x%x"
+			", reg 0x%x\n", err, ab->debug_bank,
+			ab->debug_address);
+		return -EINVAL;
+	}
+	seq_printf(s, "0x%02X\n", regvalue);
+
+	return 0;
+}
+
+static int ab5500_val_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab5500_val_print, inode->i_private);
+}
+
+static ssize_t ab5500_val_write(struct file *file,
+	const char __user *user_buf,
+	size_t count, loff_t *ppos)
+{
+	struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
+	char buf[32];
+	int buf_size;
+	unsigned long user_val;
+	int err;
+	u8 regvalue;
+
+	/* Get userspace string and assure termination */
+	buf_size = min(count, (sizeof(buf)-1));
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	err = strict_strtoul(buf, 0, &user_val);
+	if (err)
+		return -EINVAL;
+	if (user_val > 0xff) {
+		dev_err(ab->dev,
+			"debugfs error input > 0xff\n");
+		return -EINVAL;
+	}
+	err = ab5500_mask_and_set_register_interruptible_raw(
+		ab, (u8)ab->debug_bank,
+		(u8)ab->debug_address, 0xFF, (u8)user_val);
+	if (err)
+		return -EINVAL;
+
+	ab5500_get_register_interruptible_raw(ab, (u8)ab->debug_bank,
+		(u8)ab->debug_address, &regvalue);
+	if (err)
+		return -EINVAL;
+
+	return buf_size;
+}
+
+static const struct file_operations ab5500_bank_fops = {
+	.open = ab5500_bank_open,
+	.write = ab5500_bank_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static const struct file_operations ab5500_address_fops = {
+	.open = ab5500_address_open,
+	.write = ab5500_address_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static const struct file_operations ab5500_val_fops = {
+	.open = ab5500_val_open,
+	.write = ab5500_val_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static struct dentry *ab5500_dir;
+static struct dentry *ab5500_reg_file;
+static struct dentry *ab5500_bank_file;
+static struct dentry *ab5500_address_file;
+static struct dentry *ab5500_val_file;
+
+void __init ab5500_setup_debugfs(struct ab5500 *ab)
+{
+	ab->debug_bank = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP;
+	ab->debug_address = AB5500_CHIP_ID;
+
+	ab5500_dir = debugfs_create_dir("ab5500", NULL);
+	if (!ab5500_dir)
+		goto exit_no_debugfs;
+
+	ab5500_reg_file = debugfs_create_file("all-bank-registers",
+		S_IRUGO, ab5500_dir, ab, &ab5500_registers_fops);
+	if (!ab5500_reg_file)
+		goto exit_destroy_dir;
+
+	ab5500_bank_file = debugfs_create_file("register-bank",
+		(S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_bank_fops);
+	if (!ab5500_bank_file)
+		goto exit_destroy_reg;
+
+	ab5500_address_file = debugfs_create_file("register-address",
+		(S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_address_fops);
+	if (!ab5500_address_file)
+		goto exit_destroy_bank;
+
+	ab5500_val_file = debugfs_create_file("register-value",
+		(S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_val_fops);
+	if (!ab5500_val_file)
+		goto exit_destroy_address;
+
+	return;
+
+exit_destroy_address:
+	debugfs_remove(ab5500_address_file);
+exit_destroy_bank:
+	debugfs_remove(ab5500_bank_file);
+exit_destroy_reg:
+	debugfs_remove(ab5500_reg_file);
+exit_destroy_dir:
+	debugfs_remove(ab5500_dir);
+exit_no_debugfs:
+	dev_err(ab->dev, "failed to create debugfs entries.\n");
+	return;
+}
+
+void __exit ab5500_remove_debugfs(void)
+{
+	debugfs_remove(ab5500_val_file);
+	debugfs_remove(ab5500_address_file);
+	debugfs_remove(ab5500_bank_file);
+	debugfs_remove(ab5500_reg_file);
+	debugfs_remove(ab5500_dir);
+}
diff --git a/drivers/mfd/ab5500-debugfs.h b/drivers/mfd/ab5500-debugfs.h
new file mode 100644
index 00000000000..7330a9b6afa
--- /dev/null
+++ b/drivers/mfd/ab5500-debugfs.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Debugfs interface to the AB5500 core driver
+ */
+
+#ifdef CONFIG_DEBUG_FS
+
+void ab5500_setup_debugfs(struct ab5500 *ab);
+void ab5500_remove_debugfs(void);
+
+#else /* !CONFIG_DEBUG_FS */
+
+static inline void ab5500_setup_debugfs(struct ab5500 *ab)
+{
+}
+
+static inline void ab5500_remove_debugfs(void)
+{
+}
+
+#endif
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 387705e494b..1e9173804ed 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -92,6 +92,8 @@
 #define AB8500_REV_REG			0x80
 #define AB8500_SWITCH_OFF_STATUS	0x00
 
+#define AB8500_TURN_ON_STATUS		0x00
+
 /*
  * Map interrupt numbers to the LATCH and MASK register offsets, Interrupt
  * numbers are indexed into this array with (num / 8).
@@ -293,6 +295,7 @@ static struct irq_chip ab8500_irq_chip = {
 	.irq_bus_lock		= ab8500_irq_lock,
 	.irq_bus_sync_unlock	= ab8500_irq_sync_unlock,
 	.irq_mask		= ab8500_irq_mask,
+	.irq_disable		= ab8500_irq_mask,
 	.irq_unmask		= ab8500_irq_unmask,
 };
 
@@ -811,12 +814,40 @@ static ssize_t show_switch_off_status(struct device *dev,
 	return sprintf(buf, "%#x\n", value);
 }
 
+/*
+ * ab8500 has turned on due to (TURN_ON_STATUS):
+ * 0x01 PORnVbat
+ * 0x02 PonKey1dbF
+ * 0x04 PonKey2dbF
+ * 0x08 RTCAlarm
+ * 0x10 MainChDet
+ * 0x20 VbusDet
+ * 0x40 UsbIDDetect
+ * 0x80 Reserved
+ */
+static ssize_t show_turn_on_status(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int ret;
+	u8 value;
+	struct ab8500 *ab8500;
+
+	ab8500 = dev_get_drvdata(dev);
+	ret = get_register_interruptible(ab8500, AB8500_SYS_CTRL1_BLOCK,
+		AB8500_TURN_ON_STATUS, &value);
+	if (ret < 0)
+		return ret;
+	return sprintf(buf, "%#x\n", value);
+}
+
 static DEVICE_ATTR(chip_id, S_IRUGO, show_chip_id, NULL);
 static DEVICE_ATTR(switch_off_status, S_IRUGO, show_switch_off_status, NULL);
+static DEVICE_ATTR(turn_on_status, S_IRUGO, show_turn_on_status, NULL);
 
 static struct attribute *ab8500_sysfs_entries[] = {
 	&dev_attr_chip_id.attr,
 	&dev_attr_switch_off_status.attr,
+	&dev_attr_turn_on_status.attr,
 	NULL,
 };
 
@@ -843,11 +874,11 @@ int __devinit ab8500_init(struct ab8500 *ab8500)
 		return ret;
 
 	switch (value) {
-	case AB8500_CUTEARLY:
 	case AB8500_CUT1P0:
 	case AB8500_CUT1P1:
 	case AB8500_CUT2P0:
 	case AB8500_CUT3P0:
+	case AB8500_CUT3P3:
 		dev_info(ab8500->dev, "detected chip, revision: %#x\n", value);
 		break;
 	default:
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index 64bdeeb1c11..dedb7f65cea 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -8,6 +8,7 @@
 #include <linux/seq_file.h>
 #include <linux/uaccess.h>
 #include <linux/fs.h>
+#include <linux/module.h>
 #include <linux/debugfs.h>
 #include <linux/platform_device.h>
 
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index f16afb234ff..e985d1701a8 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -143,12 +143,15 @@ struct ab8500_gpadc *ab8500_gpadc_get(char *name)
 }
 EXPORT_SYMBOL(ab8500_gpadc_get);
 
-static int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 input,
+/**
+ * ab8500_gpadc_ad_to_voltage() - Convert a raw ADC value to a voltage
+ */
+int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
 	int ad_value)
 {
 	int res;
 
-	switch (input) {
+	switch (channel) {
 	case MAIN_CHARGER_V:
 		/* For some reason we don't have calibrated data */
 		if (!gpadc->cal_data[ADC_INPUT_VMAIN].gain) {
@@ -232,18 +235,46 @@ static int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 input,
 	}
 	return res;
 }
+EXPORT_SYMBOL(ab8500_gpadc_ad_to_voltage);
 
 /**
  * ab8500_gpadc_convert() - gpadc conversion
- * @input:	analog input to be converted to digital data
+ * @channel:	analog channel to be converted to digital data
  *
  * This function converts the selected analog i/p to digital
  * data.
  */
-int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input)
+int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel)
+{
+	int ad_value;
+	int voltage;
+
+	ad_value = ab8500_gpadc_read_raw(gpadc, channel);
+	if (ad_value < 0) {
+		dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", channel);
+		return ad_value;
+	}
+
+	voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value);
+
+	if (voltage < 0)
+		dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
+			" %d AD: 0x%x\n", channel, ad_value);
+
+	return voltage;
+}
+EXPORT_SYMBOL(ab8500_gpadc_convert);
+
+/**
+ * ab8500_gpadc_read_raw() - gpadc read
+ * @channel:	analog channel to be read
+ *
+ * This function obtains the raw ADC value, this then needs
+ * to be converted by calling ab8500_gpadc_ad_to_voltage()
+ */
+int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
 {
 	int ret;
-	u16 data = 0;
 	int looplimit = 0;
 	u8 val, low_data, high_data;
 
@@ -278,9 +309,9 @@ int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input)
 		goto out;
 	}
 
-	/* Select the input source and set average samples to 16 */
+	/* Select the channel source and set average samples to 16 */
 	ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
-		AB8500_GPADC_CTRL2_REG, (input | SW_AVG_16));
+		AB8500_GPADC_CTRL2_REG, (channel | SW_AVG_16));
 	if (ret < 0) {
 		dev_err(gpadc->dev,
 			"gpadc_conversion: set avg samples failed\n");
@@ -292,7 +323,7 @@ int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input)
 	 * charging current sense if it needed, ABB 3.0 needs some special
 	 * treatment too.
 	 */
-	switch (input) {
+	switch (channel) {
 	case MAIN_CHARGER_C:
 	case USB_CHARGER_C:
 		ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
@@ -359,7 +390,6 @@ int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input)
 		goto out;
 	}
 
-	data = (high_data << 8) | low_data;
 	/* Disable GPADC */
 	ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
 		AB8500_GPADC_CTRL1_REG, DIS_GPADC);
@@ -370,8 +400,8 @@ int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input)
 	/* Disable VTVout LDO this is required for GPADC */
 	regulator_disable(gpadc->regu);
 	mutex_unlock(&gpadc->ab8500_gpadc_lock);
-	ret = ab8500_gpadc_ad_to_voltage(gpadc, input, data);
-	return ret;
+
+	return (high_data << 8) | low_data;
 
 out:
 	/*
@@ -385,10 +415,10 @@ out:
 	regulator_disable(gpadc->regu);
 	mutex_unlock(&gpadc->ab8500_gpadc_lock);
 	dev_err(gpadc->dev,
-		"gpadc_conversion: Failed to AD convert channel %d\n", input);
+		"gpadc_conversion: Failed to AD convert channel %d\n", channel);
 	return ret;
 }
-EXPORT_SYMBOL(ab8500_gpadc_convert);
+EXPORT_SYMBOL(ab8500_gpadc_read_raw);
 
 /**
  * ab8500_bm_gpswadcconvend_handler() - isr for s/w gpadc conversion completion
diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index 392185965b3..f20feefac19 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -5,6 +5,7 @@
  */
 
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/ab8500.h>
 #include <linux/mfd/abx500.h>
diff --git a/drivers/mfd/abx500-core.c b/drivers/mfd/abx500-core.c
index f12720dbe12..7ce65f49480 100644
--- a/drivers/mfd/abx500-core.c
+++ b/drivers/mfd/abx500-core.c
@@ -8,6 +8,7 @@
 #include <linux/list.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/mfd/abx500.h>
 
 static LIST_HEAD(abx500_list);
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index c71ae09430c..b85bbd7f0d1 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/export.h>
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
@@ -584,7 +585,7 @@ static int asic3_gpio_remove(struct platform_device *pdev)
 	return gpiochip_remove(&asic->gpio);
 }
 
-static int asic3_clk_enable(struct asic3 *asic, struct asic3_clk *clk)
+static void asic3_clk_enable(struct asic3 *asic, struct asic3_clk *clk)
 {
 	unsigned long flags;
 	u32 cdex;
@@ -596,8 +597,6 @@ static int asic3_clk_enable(struct asic3 *asic, struct asic3_clk *clk)
 		asic3_write_register(asic, ASIC3_OFFSET(CLOCK, CDEX), cdex);
 	}
 	spin_unlock_irqrestore(&asic->lock, flags);
-
-	return 0;
 }
 
 static void asic3_clk_disable(struct asic3 *asic, struct asic3_clk *clk)
@@ -779,6 +778,8 @@ static struct mfd_cell asic3_cell_mmc = {
 	.name          = "tmio-mmc",
 	.enable        = asic3_mmc_enable,
 	.disable       = asic3_mmc_disable,
+	.suspend       = asic3_mmc_disable,
+	.resume        = asic3_mmc_enable,
 	.platform_data = &asic3_mmc_data,
 	.pdata_size    = sizeof(asic3_mmc_data),
 	.num_resources = ARRAY_SIZE(asic3_mmc_resources),
@@ -811,24 +812,43 @@ static int asic3_leds_disable(struct platform_device *pdev)
 	return 0;
 }
 
+static int asic3_leds_suspend(struct platform_device *pdev)
+{
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+	while (asic3_gpio_get(&asic->gpio, ASIC3_GPIO(C, cell->id)) != 0)
+		msleep(1);
+
+	asic3_clk_disable(asic, &asic->clocks[clock_ledn[cell->id]]);
+
+	return 0;
+}
+
 static struct mfd_cell asic3_cell_leds[ASIC3_NUM_LEDS] = {
 	[0] = {
 		.name          = "leds-asic3",
 		.id            = 0,
 		.enable        = asic3_leds_enable,
 		.disable       = asic3_leds_disable,
+		.suspend       = asic3_leds_suspend,
+		.resume        = asic3_leds_enable,
 	},
 	[1] = {
 		.name          = "leds-asic3",
 		.id            = 1,
 		.enable        = asic3_leds_enable,
 		.disable       = asic3_leds_disable,
+		.suspend       = asic3_leds_suspend,
+		.resume        = asic3_leds_enable,
 	},
 	[2] = {
 		.name          = "leds-asic3",
 		.id            = 2,
 		.enable        = asic3_leds_enable,
 		.disable       = asic3_leds_disable,
+		.suspend       = asic3_leds_suspend,
+		.resume        = asic3_leds_enable,
 	},
 };
 
@@ -949,6 +969,7 @@ static int __init asic3_probe(struct platform_device *pdev)
 		goto out_unmap;
 	}
 
+	asic->gpio.label = "asic3";
 	asic->gpio.base = pdata->gpio_base;
 	asic->gpio.ngpio = ASIC3_NUM_GPIOS;
 	asic->gpio.get = asic3_gpio_get;
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 2fadbaeb1cb..1b79c37fd59 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -523,7 +523,7 @@ static int __devinit da903x_probe(struct i2c_client *client,
 	chip->ops->read_events(chip, &tmp);
 
 	ret = request_irq(client->irq, da903x_irq_handler,
-			IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			IRQF_TRIGGER_FALLING,
 			"da903x", chip);
 	if (ret) {
 		dev_err(&client->dev, "failed to request irq %d\n",
diff --git a/drivers/mfd/db5500-prcmu.c b/drivers/mfd/db5500-prcmu.c
index 9dbb3cab4a6..bb115b2f04e 100644
--- a/drivers/mfd/db5500-prcmu.c
+++ b/drivers/mfd/db5500-prcmu.c
@@ -20,11 +20,11 @@
 #include <linux/jiffies.h>
 #include <linux/bitops.h>
 #include <linux/interrupt.h>
-#include <linux/mfd/db5500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/db5500-regs.h>
-#include "db5500-prcmu-regs.h"
+#include "dbx500-prcmu-regs.h"
 
 #define _PRCM_MB_HEADER (tcdm_base + 0xFE8)
 #define PRCM_REQ_MB0_HEADER (_PRCM_MB_HEADER + 0x0)
@@ -109,15 +109,18 @@ enum mb5_header {
 #define PRCMU_DSI_CLOCK_SETTING			0x00000128
 /* TVCLK_MGT PLLSW=001 (PLLSOC0) PLLDIV=0x13, = 19.05 MHZ */
 #define PRCMU_DSI_LP_CLOCK_SETTING		0x00000135
-#define PRCMU_PLLDSI_FREQ_SETTING		0x0004013C
+#define PRCMU_PLLDSI_FREQ_SETTING		0x00020121
 #define PRCMU_DSI_PLLOUT_SEL_SETTING		0x00000002
-#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV		0x03000101
+#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV		0x03000201
 #define PRCMU_DISABLE_ESCAPE_CLOCK_DIV		0x00000101
 
 #define PRCMU_ENABLE_PLLDSI			0x00000001
 #define PRCMU_DISABLE_PLLDSI			0x00000000
 
 #define PRCMU_DSI_RESET_SW			0x00000003
+#define PRCMU_RESOUTN0_PIN			0x00000001
+#define PRCMU_RESOUTN1_PIN			0x00000002
+#define PRCMU_RESOUTN2_PIN			0x00000004
 
 #define PRCMU_PLLDSI_LOCKP_LOCKED		0x3
 
@@ -315,31 +318,31 @@ static bool read_mailbox_0(void)
 		r = false;
 		break;
 	}
-	writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR);
+	writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR);
 	return r;
 }
 
 static bool read_mailbox_1(void)
 {
-	writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR);
+	writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
 static bool read_mailbox_2(void)
 {
-	writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR);
+	writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
 static bool read_mailbox_3(void)
 {
-	writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR);
+	writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
 static bool read_mailbox_4(void)
 {
-	writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR);
+	writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
@@ -360,19 +363,19 @@ static bool read_mailbox_5(void)
 		print_unknown_header_warning(5, header);
 		break;
 	}
-	writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR);
+	writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
 static bool read_mailbox_6(void)
 {
-	writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR);
+	writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
 static bool read_mailbox_7(void)
 {
-	writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR);
+	writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
@@ -434,7 +437,7 @@ int __init db5500_prcmu_init(void)
 		return -ENODEV;
 
 	/* Clean up the mailbox interrupts after pre-kernel code. */
-	writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLEAR);
+	writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
 
 	r = request_threaded_irq(IRQ_DB5500_PRCMU1, prcmu_irq_handler,
 		prcmu_irq_thread_fn, 0, "prcmu", NULL);
diff --git a/drivers/mfd/db8500-prcmu-regs.h b/drivers/mfd/db8500-prcmu-regs.h
deleted file mode 100644
index 3bbf04d5804..00000000000
--- a/drivers/mfd/db8500-prcmu-regs.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- *
- * License Terms: GNU General Public License v2
- *
- * PRCM Unit registers
- */
-#ifndef __DB8500_PRCMU_REGS_H
-#define __DB8500_PRCMU_REGS_H
-
-#include <linux/bitops.h>
-#include <mach/hardware.h>
-
-#define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
-
-#define PRCM_ARM_PLLDIVPS 0x118
-#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE	BITS(0, 5)
-#define PRCM_ARM_PLLDIVPS_MAX_MASK	0xF
-
-#define PRCM_PLLARM_LOCKP 0x0A8
-#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 BIT(1)
-
-#define PRCM_ARM_CHGCLKREQ 0x114
-#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0)
-
-#define PRCM_PLLARM_ENABLE 0x98
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE	BIT(0)
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON	BIT(8)
-
-#define PRCM_ARMCLKFIX_MGT	0x0
-#define PRCM_A9_RESETN_CLR	0x1f4
-#define PRCM_A9_RESETN_SET	0x1f0
-#define PRCM_ARM_LS_CLAMP	0x30C
-#define PRCM_SRAM_A9		0x308
-
-/* ARM WFI Standby signal register */
-#define PRCM_ARM_WFI_STANDBY	0x130
-#define PRCM_IOCR		0x310
-#define PRCM_IOCR_IOFORCE BIT(0)
-
-/* CPU mailbox registers */
-#define PRCM_MBOX_CPU_VAL 0x0FC
-#define PRCM_MBOX_CPU_SET 0x100
-
-/* Dual A9 core interrupt management unit registers */
-#define PRCM_A9_MASK_REQ 0x328
-#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ BIT(0)
-
-#define PRCM_A9_MASK_ACK	0x32C
-#define PRCM_ARMITMSK31TO0	0x11C
-#define PRCM_ARMITMSK63TO32	0x120
-#define PRCM_ARMITMSK95TO64	0x124
-#define PRCM_ARMITMSK127TO96	0x128
-#define PRCM_POWER_STATE_VAL	0x25C
-#define PRCM_ARMITVAL31TO0	0x260
-#define PRCM_ARMITVAL63TO32	0x264
-#define PRCM_ARMITVAL95TO64	0x268
-#define PRCM_ARMITVAL127TO96	0x26C
-
-#define PRCM_HOSTACCESS_REQ 0x334
-#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ BIT(0)
-
-#define PRCM_ARM_IT1_CLR 0x48C
-#define PRCM_ARM_IT1_VAL 0x494
-
-#define PRCM_ITSTATUS0		0x148
-#define PRCM_ITSTATUS1		0x150
-#define PRCM_ITSTATUS2		0x158
-#define PRCM_ITSTATUS3		0x160
-#define PRCM_ITSTATUS4		0x168
-#define PRCM_ITSTATUS5		0x484
-#define PRCM_ITCLEAR5		0x488
-#define PRCM_ARMIT_MASKXP70_IT	0x1018
-
-/* System reset register */
-#define PRCM_APE_SOFTRST 0x228
-
-/* Level shifter and clamp control registers */
-#define PRCM_MMIP_LS_CLAMP_SET 0x420
-#define PRCM_MMIP_LS_CLAMP_CLR 0x424
-
-/* PRCMU HW semaphore */
-#define PRCM_SEM 0x400
-#define PRCM_SEM_PRCM_SEM BIT(0)
-
-/* PRCMU clock/PLL/reset registers */
-#define PRCM_PLLDSI_FREQ	0x500
-#define PRCM_PLLDSI_ENABLE	0x504
-#define PRCM_PLLDSI_LOCKP	0x508
-#define PRCM_DSI_PLLOUT_SEL	0x530
-#define PRCM_DSITVCLK_DIV	0x52C
-#define PRCM_APE_RESETN_SET	0x1E4
-#define PRCM_APE_RESETN_CLR	0x1E8
-
-#define PRCM_TCR		0x1C8
-#define PRCM_TCR_TENSEL_MASK	BITS(0, 7)
-#define PRCM_TCR_STOP_TIMERS	BIT(16)
-#define PRCM_TCR_DOZE_MODE	BIT(17)
-
-#define PRCM_CLKOCR			0x1CC
-#define PRCM_CLKOCR_CLKODIV0_SHIFT	0
-#define PRCM_CLKOCR_CLKODIV0_MASK	BITS(0, 5)
-#define PRCM_CLKOCR_CLKOSEL0_SHIFT	6
-#define PRCM_CLKOCR_CLKOSEL0_MASK	BITS(6, 8)
-#define PRCM_CLKOCR_CLKODIV1_SHIFT	16
-#define PRCM_CLKOCR_CLKODIV1_MASK	BITS(16, 21)
-#define PRCM_CLKOCR_CLKOSEL1_SHIFT	22
-#define PRCM_CLKOCR_CLKOSEL1_MASK	BITS(22, 24)
-#define PRCM_CLKOCR_CLK1TYPE		BIT(28)
-
-#define PRCM_SGACLK_MGT		0x014
-#define PRCM_UARTCLK_MGT	0x018
-#define PRCM_MSP02CLK_MGT	0x01C
-#define PRCM_MSP1CLK_MGT	0x288
-#define PRCM_I2CCLK_MGT		0x020
-#define PRCM_SDMMCCLK_MGT	0x024
-#define PRCM_SLIMCLK_MGT	0x028
-#define PRCM_PER1CLK_MGT	0x02C
-#define PRCM_PER2CLK_MGT	0x030
-#define PRCM_PER3CLK_MGT	0x034
-#define PRCM_PER5CLK_MGT	0x038
-#define PRCM_PER6CLK_MGT	0x03C
-#define PRCM_PER7CLK_MGT	0x040
-#define PRCM_LCDCLK_MGT		0x044
-#define PRCM_BMLCLK_MGT		0x04C
-#define PRCM_HSITXCLK_MGT	0x050
-#define PRCM_HSIRXCLK_MGT	0x054
-#define PRCM_HDMICLK_MGT	0x058
-#define PRCM_APEATCLK_MGT	0x05C
-#define PRCM_APETRACECLK_MGT	0x060
-#define PRCM_MCDECLK_MGT	0x064
-#define PRCM_IPI2CCLK_MGT	0x068
-#define PRCM_DSIALTCLK_MGT	0x06C
-#define PRCM_DMACLK_MGT		0x074
-#define PRCM_B2R2CLK_MGT	0x078
-#define PRCM_TVCLK_MGT		0x07C
-#define PRCM_UNIPROCLK_MGT	0x278
-#define PRCM_SSPCLK_MGT		0x280
-#define PRCM_RNGCLK_MGT		0x284
-#define PRCM_UICCCLK_MGT	0x27C
-
-#define PRCM_CLK_MGT_CLKPLLDIV_MASK	BITS(0, 4)
-#define PRCM_CLK_MGT_CLKPLLSW_MASK	BITS(5, 7)
-#define PRCM_CLK_MGT_CLKEN		BIT(8)
-
-/* ePOD and memory power signal control registers */
-#define PRCM_EPOD_C_SET		0x410
-#define PRCM_SRAM_LS_SLEEP	0x304
-
-/* Debug power control unit registers */
-#define PRCM_POWER_STATE_SET 0x254
-
-/* Miscellaneous unit registers */
-#define PRCM_DSI_SW_RESET 0x324
-#define PRCM_GPIOCR		0x138
-
-/* GPIOCR register */
-#define PRCM_GPIOCR_SPI2_SELECT BIT(23)
-
-#define PRCM_DDR_SUBSYS_APE_MINBW  0x438
-
-#endif /* __DB8500_PRCMU_REGS_H */
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 02a15d7cb3b..a25ab9c6b5a 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -27,14 +27,14 @@
 #include <linux/platform_device.h>
 #include <linux/uaccess.h>
 #include <linux/mfd/core.h>
-#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
 #include <linux/regulator/db8500-prcmu.h>
 #include <linux/regulator/machine.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/db8500-regs.h>
 #include <mach/id.h>
-#include "db8500-prcmu-regs.h"
+#include "dbx500-prcmu-regs.h"
 
 /* Offset for the firmware version within the TCPM */
 #define PRCMU_FW_VERSION_OFFSET 0xA4
@@ -131,12 +131,14 @@
 #define MB1H_REQUEST_APE_OPP_100_VOLT 0x3
 #define MB1H_RELEASE_APE_OPP_100_VOLT 0x4
 #define MB1H_RELEASE_USB_WAKEUP 0x5
+#define MB1H_PLL_ON_OFF 0x6
 
 /* Mailbox 1 Requests */
 #define PRCM_REQ_MB1_ARM_OPP			(PRCM_REQ_MB1 + 0x0)
 #define PRCM_REQ_MB1_APE_OPP			(PRCM_REQ_MB1 + 0x1)
-#define PRCM_REQ_MB1_APE_OPP_100_RESTORE	(PRCM_REQ_MB1 + 0x4)
-#define PRCM_REQ_MB1_ARM_OPP_100_RESTORE	(PRCM_REQ_MB1 + 0x8)
+#define PRCM_REQ_MB1_PLL_ON_OFF			(PRCM_REQ_MB1 + 0x4)
+#define PLL_SOC1_OFF	0x4
+#define PLL_SOC1_ON	0x8
 
 /* Mailbox 1 ACKs */
 #define PRCM_ACK_MB1_CURRENT_ARM_OPP	(PRCM_ACK_MB1 + 0x0)
@@ -184,6 +186,11 @@
 #define MB4H_HOTDOG	0x12
 #define MB4H_HOTMON	0x13
 #define MB4H_HOT_PERIOD	0x14
+#define MB4H_A9WDOG_CONF 0x16
+#define MB4H_A9WDOG_EN   0x17
+#define MB4H_A9WDOG_DIS  0x18
+#define MB4H_A9WDOG_LOAD 0x19
+#define MB4H_A9WDOG_KICK 0x20
 
 /* Mailbox 4 Requests */
 #define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE	(PRCM_REQ_MB4 + 0x0)
@@ -196,6 +203,13 @@
 #define PRCM_REQ_MB4_HOT_PERIOD			(PRCM_REQ_MB4 + 0x0)
 #define HOTMON_CONFIG_LOW			BIT(0)
 #define HOTMON_CONFIG_HIGH			BIT(1)
+#define PRCM_REQ_MB4_A9WDOG_0			(PRCM_REQ_MB4 + 0x0)
+#define PRCM_REQ_MB4_A9WDOG_1			(PRCM_REQ_MB4 + 0x1)
+#define PRCM_REQ_MB4_A9WDOG_2			(PRCM_REQ_MB4 + 0x2)
+#define PRCM_REQ_MB4_A9WDOG_3			(PRCM_REQ_MB4 + 0x3)
+#define A9WDOG_AUTO_OFF_EN			BIT(7)
+#define A9WDOG_AUTO_OFF_DIS			0
+#define A9WDOG_ID_MASK				0xf
 
 /* Mailbox 5 Requests */
 #define PRCM_REQ_MB5_I2C_SLAVE_OP	(PRCM_REQ_MB5 + 0x0)
@@ -412,7 +426,7 @@ struct clk_mgt {
 
 static DEFINE_SPINLOCK(clk_mgt_lock);
 
-#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT), 0 }
+#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT_OFF), 0 }
 struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
 	CLK_MGT_ENTRY(SGACLK),
 	CLK_MGT_ENTRY(UARTCLK),
@@ -445,6 +459,35 @@ struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
 	CLK_MGT_ENTRY(UICCCLK),
 };
 
+static struct regulator *hwacc_regulator[NUM_HW_ACC];
+static struct regulator *hwacc_ret_regulator[NUM_HW_ACC];
+
+static bool hwacc_enabled[NUM_HW_ACC];
+static bool hwacc_ret_enabled[NUM_HW_ACC];
+
+static const char *hwacc_regulator_name[NUM_HW_ACC] = {
+	[HW_ACC_SVAMMDSP]	= "hwacc-sva-mmdsp",
+	[HW_ACC_SVAPIPE]	= "hwacc-sva-pipe",
+	[HW_ACC_SIAMMDSP]	= "hwacc-sia-mmdsp",
+	[HW_ACC_SIAPIPE]	= "hwacc-sia-pipe",
+	[HW_ACC_SGA]		= "hwacc-sga",
+	[HW_ACC_B2R2]		= "hwacc-b2r2",
+	[HW_ACC_MCDE]		= "hwacc-mcde",
+	[HW_ACC_ESRAM1]		= "hwacc-esram1",
+	[HW_ACC_ESRAM2]		= "hwacc-esram2",
+	[HW_ACC_ESRAM3]		= "hwacc-esram3",
+	[HW_ACC_ESRAM4]		= "hwacc-esram4",
+};
+
+static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = {
+	[HW_ACC_SVAMMDSP]	= "hwacc-sva-mmdsp-ret",
+	[HW_ACC_SIAMMDSP]	= "hwacc-sia-mmdsp-ret",
+	[HW_ACC_ESRAM1]		= "hwacc-esram1-ret",
+	[HW_ACC_ESRAM2]		= "hwacc-esram2-ret",
+	[HW_ACC_ESRAM3]		= "hwacc-esram3-ret",
+	[HW_ACC_ESRAM4]		= "hwacc-esram4-ret",
+};
+
 /*
 * Used by MCDE to setup all necessary PRCMU registers
 */
@@ -493,55 +536,51 @@ static struct {
 } prcmu_version;
 
 
-int prcmu_enable_dsipll(void)
+int db8500_prcmu_enable_dsipll(void)
 {
 	int i;
 	unsigned int plldsifreq;
 
 	/* Clear DSIPLL_RESETN */
-	writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_CLR));
+	writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR);
 	/* Unclamp DSIPLL in/out */
-	writel(PRCMU_UNCLAMP_DSIPLL, (_PRCMU_BASE + PRCM_MMIP_LS_CLAMP_CLR));
+	writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
 
 	if (prcmu_is_u8400())
 		plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400;
 	else
 		plldsifreq = PRCMU_PLLDSI_FREQ_SETTING;
 	/* Set DSI PLL FREQ */
-	writel(plldsifreq, (_PRCMU_BASE + PRCM_PLLDSI_FREQ));
-	writel(PRCMU_DSI_PLLOUT_SEL_SETTING,
-		(_PRCMU_BASE + PRCM_DSI_PLLOUT_SEL));
+	writel(plldsifreq, PRCM_PLLDSI_FREQ);
+	writel(PRCMU_DSI_PLLOUT_SEL_SETTING, PRCM_DSI_PLLOUT_SEL);
 	/* Enable Escape clocks */
-	writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV,
-					(_PRCMU_BASE + PRCM_DSITVCLK_DIV));
+	writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
 
 	/* Start DSI PLL */
-	writel(PRCMU_ENABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
+	writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
 	/* Reset DSI PLL */
-	writel(PRCMU_DSI_RESET_SW, (_PRCMU_BASE + PRCM_DSI_SW_RESET));
+	writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET);
 	for (i = 0; i < 10; i++) {
-		if ((readl(_PRCMU_BASE + PRCM_PLLDSI_LOCKP) &
-			PRCMU_PLLDSI_LOCKP_LOCKED)
+		if ((readl(PRCM_PLLDSI_LOCKP) & PRCMU_PLLDSI_LOCKP_LOCKED)
 					== PRCMU_PLLDSI_LOCKP_LOCKED)
 			break;
 		udelay(100);
 	}
 	/* Set DSIPLL_RESETN */
-	writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_SET));
+	writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET);
 	return 0;
 }
 
-int prcmu_disable_dsipll(void)
+int db8500_prcmu_disable_dsipll(void)
 {
 	/* Disable dsi pll */
-	writel(PRCMU_DISABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
+	writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
 	/* Disable  escapeclock */
-	writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV,
-					(_PRCMU_BASE + PRCM_DSITVCLK_DIV));
+	writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
 	return 0;
 }
 
-int prcmu_set_display_clocks(void)
+int db8500_prcmu_set_display_clocks(void)
 {
 	unsigned long flags;
 	unsigned int dsiclk;
@@ -554,15 +593,15 @@ int prcmu_set_display_clocks(void)
 	spin_lock_irqsave(&clk_mgt_lock, flags);
 
 	/* Grab the HW semaphore. */
-	while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
 		cpu_relax();
 
-	writel(dsiclk, (_PRCMU_BASE + PRCM_HDMICLK_MGT));
-	writel(PRCMU_DSI_LP_CLOCK_SETTING, (_PRCMU_BASE + PRCM_TVCLK_MGT));
-	writel(PRCMU_DPI_CLOCK_SETTING, (_PRCMU_BASE + PRCM_LCDCLK_MGT));
+	writel(dsiclk, PRCM_HDMICLK_MGT);
+	writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT);
+	writel(PRCMU_DPI_CLOCK_SETTING, PRCM_LCDCLK_MGT);
 
 	/* Release the HW semaphore. */
-	writel(0, (_PRCMU_BASE + PRCM_SEM));
+	writel(0, PRCM_SEM);
 
 	spin_unlock_irqrestore(&clk_mgt_lock, flags);
 
@@ -578,8 +617,8 @@ void prcmu_enable_spi2(void)
 	unsigned long flags;
 
 	spin_lock_irqsave(&gpiocr_lock, flags);
-	reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
-	writel(reg | PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
+	reg = readl(PRCM_GPIOCR);
+	writel(reg | PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR);
 	spin_unlock_irqrestore(&gpiocr_lock, flags);
 }
 
@@ -592,8 +631,8 @@ void prcmu_disable_spi2(void)
 	unsigned long flags;
 
 	spin_lock_irqsave(&gpiocr_lock, flags);
-	reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
-	writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
+	reg = readl(PRCM_GPIOCR);
+	writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR);
 	spin_unlock_irqrestore(&gpiocr_lock, flags);
 }
 
@@ -701,7 +740,7 @@ int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
 
 	spin_lock_irqsave(&clkout_lock, flags);
 
-	val = readl(_PRCMU_BASE + PRCM_CLKOCR);
+	val = readl(PRCM_CLKOCR);
 	if (val & div_mask) {
 		if (div) {
 			if ((val & mask) != bits) {
@@ -715,7 +754,7 @@ int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
 			}
 		}
 	}
-	writel((bits | (val & ~mask)), (_PRCMU_BASE + PRCM_CLKOCR));
+	writel((bits | (val & ~mask)), PRCM_CLKOCR);
 	requests[clkout] += (div ? 1 : -1);
 
 unlock_and_return:
@@ -724,7 +763,7 @@ unlock_and_return:
 	return r;
 }
 
-int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
+int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
 {
 	unsigned long flags;
 
@@ -732,7 +771,7 @@ int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
 
 	spin_lock_irqsave(&mb0_transfer.lock, flags);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
 		cpu_relax();
 
 	writeb(MB0H_POWER_STATE_TRANS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
@@ -741,7 +780,7 @@ int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
 	writeb((keep_ulp_clk ? 1 : 0),
 		(tcdm_base + PRCM_REQ_MB0_ULP_CLOCK_STATE));
 	writeb(0, (tcdm_base + PRCM_REQ_MB0_DO_NOT_WFI));
-	writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
 
 	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
 
@@ -770,18 +809,18 @@ static void config_wakeups(void)
 		return;
 
 	for (i = 0; i < 2; i++) {
-		while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+		while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
 			cpu_relax();
 		writel(dbb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_8500));
 		writel(abb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_4500));
 		writeb(header[i], (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
-		writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+		writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
 	}
 	last_dbb_events = dbb_events;
 	last_abb_events = abb_events;
 }
 
-void prcmu_enable_wakeups(u32 wakeups)
+void db8500_prcmu_enable_wakeups(u32 wakeups)
 {
 	unsigned long flags;
 	u32 bits;
@@ -802,7 +841,7 @@ void prcmu_enable_wakeups(u32 wakeups)
 	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
 }
 
-void prcmu_config_abb_event_readout(u32 abb_events)
+void db8500_prcmu_config_abb_event_readout(u32 abb_events)
 {
 	unsigned long flags;
 
@@ -814,7 +853,7 @@ void prcmu_config_abb_event_readout(u32 abb_events)
 	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
 }
 
-void prcmu_get_abb_event_buffer(void __iomem **buf)
+void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
 {
 	if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1)
 		*buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_1_4500);
@@ -823,13 +862,13 @@ void prcmu_get_abb_event_buffer(void __iomem **buf)
 }
 
 /**
- * prcmu_set_arm_opp - set the appropriate ARM OPP
+ * db8500_prcmu_set_arm_opp - set the appropriate ARM OPP
  * @opp: The new ARM operating point to which transition is to be made
  * Returns: 0 on success, non-zero on failure
  *
  * This function sets the the operating point of the ARM.
  */
-int prcmu_set_arm_opp(u8 opp)
+int db8500_prcmu_set_arm_opp(u8 opp)
 {
 	int r;
 
@@ -840,14 +879,14 @@ int prcmu_set_arm_opp(u8 opp)
 
 	mutex_lock(&mb1_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 		cpu_relax();
 
 	writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
 	writeb(opp, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
 	writeb(APE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
 
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb1_transfer.work);
 
 	if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
@@ -860,11 +899,11 @@ int prcmu_set_arm_opp(u8 opp)
 }
 
 /**
- * prcmu_get_arm_opp - get the current ARM OPP
+ * db8500_prcmu_get_arm_opp - get the current ARM OPP
  *
  * Returns: the current ARM OPP
  */
-int prcmu_get_arm_opp(void)
+int db8500_prcmu_get_arm_opp(void)
 {
 	return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_ARM_OPP);
 }
@@ -876,7 +915,7 @@ int prcmu_get_arm_opp(void)
  */
 int prcmu_get_ddr_opp(void)
 {
-	return readb(_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW);
+	return readb(PRCM_DDR_SUBSYS_APE_MINBW);
 }
 
 /**
@@ -892,7 +931,7 @@ int prcmu_set_ddr_opp(u8 opp)
 		return -EINVAL;
 	/* Changing the DDR OPP can hang the hardware pre-v21 */
 	if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20())
-		writeb(opp, (_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW));
+		writeb(opp, PRCM_DDR_SUBSYS_APE_MINBW);
 
 	return 0;
 }
@@ -909,14 +948,14 @@ int prcmu_set_ape_opp(u8 opp)
 
 	mutex_lock(&mb1_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 		cpu_relax();
 
 	writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
 	writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
 	writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
 
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb1_transfer.work);
 
 	if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
@@ -966,12 +1005,12 @@ int prcmu_request_ape_opp_100_voltage(bool enable)
 		header = MB1H_RELEASE_APE_OPP_100_VOLT;
 	}
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 		cpu_relax();
 
 	writeb(header, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
 
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb1_transfer.work);
 
 	if ((mb1_transfer.ack.header != header) ||
@@ -995,13 +1034,13 @@ int prcmu_release_usb_wakeup_state(void)
 
 	mutex_lock(&mb1_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 		cpu_relax();
 
 	writeb(MB1H_RELEASE_USB_WAKEUP,
 		(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
 
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb1_transfer.work);
 
 	if ((mb1_transfer.ack.header != MB1H_RELEASE_USB_WAKEUP) ||
@@ -1013,15 +1052,169 @@ int prcmu_release_usb_wakeup_state(void)
 	return r;
 }
 
+static int request_pll(u8 clock, bool enable)
+{
+	int r = 0;
+
+	if (clock == PRCMU_PLLSOC1)
+		clock = (enable ? PLL_SOC1_ON : PLL_SOC1_OFF);
+	else
+		return -EINVAL;
+
+	mutex_lock(&mb1_transfer.lock);
+
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+		cpu_relax();
+
+	writeb(MB1H_PLL_ON_OFF, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
+	writeb(clock, (tcdm_base + PRCM_REQ_MB1_PLL_ON_OFF));
+
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
+	wait_for_completion(&mb1_transfer.work);
+
+	if (mb1_transfer.ack.header != MB1H_PLL_ON_OFF)
+		r = -EIO;
+
+	mutex_unlock(&mb1_transfer.lock);
+
+	return r;
+}
+
 /**
- * prcmu_set_epod - set the state of a EPOD (power domain)
+ * prcmu_set_hwacc - set the power state of a h/w accelerator
+ * @hwacc_dev: The hardware accelerator (enum hw_acc_dev).
+ * @state: The new power state (enum hw_acc_state).
+ *
+ * This function sets the power state of a hardware accelerator.
+ * This function should not be called from interrupt context.
+ *
+ * NOTE! Deprecated, to be removed when all users switched over to use the
+ * regulator framework API.
+ */
+int prcmu_set_hwacc(u16 hwacc_dev, u8 state)
+{
+	int r = 0;
+	bool ram_retention = false;
+	bool enable, enable_ret;
+
+	/* check argument */
+	BUG_ON(hwacc_dev >= NUM_HW_ACC);
+
+	/* get state of switches */
+	enable = hwacc_enabled[hwacc_dev];
+	enable_ret = hwacc_ret_enabled[hwacc_dev];
+
+	/* set flag if retention is possible */
+	switch (hwacc_dev) {
+	case HW_ACC_SVAMMDSP:
+	case HW_ACC_SIAMMDSP:
+	case HW_ACC_ESRAM1:
+	case HW_ACC_ESRAM2:
+	case HW_ACC_ESRAM3:
+	case HW_ACC_ESRAM4:
+		ram_retention = true;
+		break;
+	}
+
+	/* check argument */
+	BUG_ON(state > HW_ON);
+	BUG_ON(state == HW_OFF_RAMRET && !ram_retention);
+
+	/* modify enable flags */
+	switch (state) {
+	case HW_OFF:
+		enable_ret = false;
+		enable = false;
+		break;
+	case HW_ON:
+		enable = true;
+		break;
+	case HW_OFF_RAMRET:
+		enable_ret = true;
+		enable = false;
+		break;
+	}
+
+	/* get regulator (lazy) */
+	if (hwacc_regulator[hwacc_dev] == NULL) {
+		hwacc_regulator[hwacc_dev] = regulator_get(NULL,
+			hwacc_regulator_name[hwacc_dev]);
+		if (IS_ERR(hwacc_regulator[hwacc_dev])) {
+			pr_err("prcmu: failed to get supply %s\n",
+				hwacc_regulator_name[hwacc_dev]);
+			r = PTR_ERR(hwacc_regulator[hwacc_dev]);
+			goto out;
+		}
+	}
+
+	if (ram_retention) {
+		if (hwacc_ret_regulator[hwacc_dev] == NULL) {
+			hwacc_ret_regulator[hwacc_dev] = regulator_get(NULL,
+				hwacc_ret_regulator_name[hwacc_dev]);
+			if (IS_ERR(hwacc_ret_regulator[hwacc_dev])) {
+				pr_err("prcmu: failed to get supply %s\n",
+					hwacc_ret_regulator_name[hwacc_dev]);
+				r = PTR_ERR(hwacc_ret_regulator[hwacc_dev]);
+				goto out;
+			}
+		}
+	}
+
+	/* set regulators */
+	if (ram_retention) {
+		if (enable_ret && !hwacc_ret_enabled[hwacc_dev]) {
+			r = regulator_enable(hwacc_ret_regulator[hwacc_dev]);
+			if (r < 0) {
+				pr_err("prcmu_set_hwacc: ret enable failed\n");
+				goto out;
+			}
+			hwacc_ret_enabled[hwacc_dev] = true;
+		}
+	}
+
+	if (enable && !hwacc_enabled[hwacc_dev]) {
+		r = regulator_enable(hwacc_regulator[hwacc_dev]);
+		if (r < 0) {
+			pr_err("prcmu_set_hwacc: enable failed\n");
+			goto out;
+		}
+		hwacc_enabled[hwacc_dev] = true;
+	}
+
+	if (!enable && hwacc_enabled[hwacc_dev]) {
+		r = regulator_disable(hwacc_regulator[hwacc_dev]);
+		if (r < 0) {
+			pr_err("prcmu_set_hwacc: disable failed\n");
+			goto out;
+		}
+		hwacc_enabled[hwacc_dev] = false;
+	}
+
+	if (ram_retention) {
+		if (!enable_ret && hwacc_ret_enabled[hwacc_dev]) {
+			r = regulator_disable(hwacc_ret_regulator[hwacc_dev]);
+			if (r < 0) {
+				pr_err("prcmu_set_hwacc: ret disable failed\n");
+				goto out;
+			}
+			hwacc_ret_enabled[hwacc_dev] = false;
+		}
+	}
+
+out:
+	return r;
+}
+EXPORT_SYMBOL(prcmu_set_hwacc);
+
+/**
+ * db8500_prcmu_set_epod - set the state of a EPOD (power domain)
  * @epod_id: The EPOD to set
  * @epod_state: The new EPOD state
  *
  * This function sets the state of a EPOD (power domain). It may not be called
  * from interrupt context.
  */
-int prcmu_set_epod(u16 epod_id, u8 epod_state)
+int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
 {
 	int r = 0;
 	bool ram_retention = false;
@@ -1048,7 +1241,7 @@ int prcmu_set_epod(u16 epod_id, u8 epod_state)
 	mutex_lock(&mb2_transfer.lock);
 
 	/* wait for mailbox */
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
 		cpu_relax();
 
 	/* fill in mailbox */
@@ -1058,7 +1251,7 @@ int prcmu_set_epod(u16 epod_id, u8 epod_state)
 
 	writeb(MB2H_DPS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB2));
 
-	writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(2), PRCM_MBOX_CPU_SET);
 
 	/*
 	 * The current firmware version does not handle errors correctly,
@@ -1145,13 +1338,13 @@ static int request_sysclk(bool enable)
 
 	spin_lock_irqsave(&mb3_transfer.lock, flags);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
 		cpu_relax();
 
 	writeb((enable ? ON : OFF), (tcdm_base + PRCM_REQ_MB3_SYSCLK_MGT));
 
 	writeb(MB3H_SYSCLK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB3));
-	writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(3), PRCM_MBOX_CPU_SET);
 
 	spin_unlock_irqrestore(&mb3_transfer.lock, flags);
 
@@ -1177,7 +1370,7 @@ static int request_timclk(bool enable)
 
 	if (!enable)
 		val |= PRCM_TCR_STOP_TIMERS;
-	writel(val, (_PRCMU_BASE + PRCM_TCR));
+	writel(val, PRCM_TCR);
 
 	return 0;
 }
@@ -1190,7 +1383,7 @@ static int request_reg_clock(u8 clock, bool enable)
 	spin_lock_irqsave(&clk_mgt_lock, flags);
 
 	/* Grab the HW semaphore. */
-	while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
 		cpu_relax();
 
 	val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
@@ -1203,34 +1396,61 @@ static int request_reg_clock(u8 clock, bool enable)
 	writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
 
 	/* Release the HW semaphore. */
-	writel(0, (_PRCMU_BASE + PRCM_SEM));
+	writel(0, PRCM_SEM);
 
 	spin_unlock_irqrestore(&clk_mgt_lock, flags);
 
 	return 0;
 }
 
+static int request_sga_clock(u8 clock, bool enable)
+{
+	u32 val;
+	int ret;
+
+	if (enable) {
+		val = readl(PRCM_CGATING_BYPASS);
+		writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
+	}
+
+	ret = request_reg_clock(clock, enable);
+
+	if (!ret && !enable) {
+		val = readl(PRCM_CGATING_BYPASS);
+		writel(val & ~PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
+	}
+
+	return ret;
+}
+
 /**
- * prcmu_request_clock() - Request for a clock to be enabled or disabled.
+ * db8500_prcmu_request_clock() - Request for a clock to be enabled or disabled.
  * @clock:      The clock for which the request is made.
  * @enable:     Whether the clock should be enabled (true) or disabled (false).
  *
  * This function should only be used by the clock implementation.
  * Do not use it from any other place!
  */
-int prcmu_request_clock(u8 clock, bool enable)
+int db8500_prcmu_request_clock(u8 clock, bool enable)
 {
-	if (clock < PRCMU_NUM_REG_CLOCKS)
-		return request_reg_clock(clock, enable);
-	else if (clock == PRCMU_TIMCLK)
+	switch(clock) {
+	case PRCMU_SGACLK:
+		return request_sga_clock(clock, enable);
+	case PRCMU_TIMCLK:
 		return request_timclk(enable);
-	else if (clock == PRCMU_SYSCLK)
+	case PRCMU_SYSCLK:
 		return request_sysclk(enable);
-	else
-		return -EINVAL;
+	case PRCMU_PLLSOC1:
+		return request_pll(clock, enable);
+	default:
+		break;
+	}
+	if (clock < PRCMU_NUM_REG_CLOCKS)
+		return request_reg_clock(clock, enable);
+	return -EINVAL;
 }
 
-int prcmu_config_esram0_deep_sleep(u8 state)
+int db8500_prcmu_config_esram0_deep_sleep(u8 state)
 {
 	if ((state > ESRAM0_DEEP_SLEEP_STATE_RET) ||
 	    (state < ESRAM0_DEEP_SLEEP_STATE_OFF))
@@ -1238,7 +1458,7 @@ int prcmu_config_esram0_deep_sleep(u8 state)
 
 	mutex_lock(&mb4_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
 		cpu_relax();
 
 	writeb(MB4H_MEM_ST, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
@@ -1248,7 +1468,7 @@ int prcmu_config_esram0_deep_sleep(u8 state)
 	       (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE));
 	writeb(state, (tcdm_base + PRCM_REQ_MB4_ESRAM0_ST));
 
-	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb4_transfer.work);
 
 	mutex_unlock(&mb4_transfer.lock);
@@ -1260,13 +1480,13 @@ int prcmu_config_hotdog(u8 threshold)
 {
 	mutex_lock(&mb4_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
 		cpu_relax();
 
 	writeb(threshold, (tcdm_base + PRCM_REQ_MB4_HOTDOG_THRESHOLD));
 	writeb(MB4H_HOTDOG, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
 
-	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb4_transfer.work);
 
 	mutex_unlock(&mb4_transfer.lock);
@@ -1278,7 +1498,7 @@ int prcmu_config_hotmon(u8 low, u8 high)
 {
 	mutex_lock(&mb4_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
 		cpu_relax();
 
 	writeb(low, (tcdm_base + PRCM_REQ_MB4_HOTMON_LOW));
@@ -1287,7 +1507,7 @@ int prcmu_config_hotmon(u8 low, u8 high)
 		(tcdm_base + PRCM_REQ_MB4_HOTMON_CONFIG));
 	writeb(MB4H_HOTMON, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
 
-	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb4_transfer.work);
 
 	mutex_unlock(&mb4_transfer.lock);
@@ -1299,13 +1519,13 @@ static int config_hot_period(u16 val)
 {
 	mutex_lock(&mb4_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
 		cpu_relax();
 
 	writew(val, (tcdm_base + PRCM_REQ_MB4_HOT_PERIOD));
 	writeb(MB4H_HOT_PERIOD, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
 
-	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb4_transfer.work);
 
 	mutex_unlock(&mb4_transfer.lock);
@@ -1326,6 +1546,78 @@ int prcmu_stop_temp_sense(void)
 	return config_hot_period(0xFFFF);
 }
 
+static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3)
+{
+
+	mutex_lock(&mb4_transfer.lock);
+
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+		cpu_relax();
+
+	writeb(d0, (tcdm_base + PRCM_REQ_MB4_A9WDOG_0));
+	writeb(d1, (tcdm_base + PRCM_REQ_MB4_A9WDOG_1));
+	writeb(d2, (tcdm_base + PRCM_REQ_MB4_A9WDOG_2));
+	writeb(d3, (tcdm_base + PRCM_REQ_MB4_A9WDOG_3));
+
+	writeb(cmd, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
+
+	writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
+	wait_for_completion(&mb4_transfer.work);
+
+	mutex_unlock(&mb4_transfer.lock);
+
+	return 0;
+
+}
+
+int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+{
+	BUG_ON(num == 0 || num > 0xf);
+	return prcmu_a9wdog(MB4H_A9WDOG_CONF, num, 0, 0,
+			    sleep_auto_off ? A9WDOG_AUTO_OFF_EN :
+			    A9WDOG_AUTO_OFF_DIS);
+}
+
+int prcmu_enable_a9wdog(u8 id)
+{
+	return prcmu_a9wdog(MB4H_A9WDOG_EN, id, 0, 0, 0);
+}
+
+int prcmu_disable_a9wdog(u8 id)
+{
+	return prcmu_a9wdog(MB4H_A9WDOG_DIS, id, 0, 0, 0);
+}
+
+int prcmu_kick_a9wdog(u8 id)
+{
+	return prcmu_a9wdog(MB4H_A9WDOG_KICK, id, 0, 0, 0);
+}
+
+/*
+ * timeout is 28 bit, in ms.
+ */
+#define MAX_WATCHDOG_TIMEOUT 131000
+int prcmu_load_a9wdog(u8 id, u32 timeout)
+{
+	if (timeout > MAX_WATCHDOG_TIMEOUT)
+		/*
+		 * Due to calculation bug in prcmu fw, timeouts
+		 * can't be bigger than 131 seconds.
+		 */
+		return -EINVAL;
+
+	return prcmu_a9wdog(MB4H_A9WDOG_LOAD,
+			    (id & A9WDOG_ID_MASK) |
+			    /*
+			     * Put the lowest 28 bits of timeout at
+			     * offset 4. Four first bits are used for id.
+			     */
+			    (u8)((timeout << 4) & 0xf0),
+			    (u8)((timeout >> 4) & 0xff),
+			    (u8)((timeout >> 12) & 0xff),
+			    (u8)((timeout >> 20) & 0xff));
+}
+
 /**
  * prcmu_set_clock_divider() - Configure the clock divider.
  * @clock:	The clock for which the request is made.
@@ -1345,7 +1637,7 @@ int prcmu_set_clock_divider(u8 clock, u8 divider)
 	spin_lock_irqsave(&clk_mgt_lock, flags);
 
 	/* Grab the HW semaphore. */
-	while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
 		cpu_relax();
 
 	val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
@@ -1354,7 +1646,7 @@ int prcmu_set_clock_divider(u8 clock, u8 divider)
 	writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
 
 	/* Release the HW semaphore. */
-	writel(0, (_PRCMU_BASE + PRCM_SEM));
+	writel(0, PRCM_SEM);
 
 	spin_unlock_irqrestore(&clk_mgt_lock, flags);
 
@@ -1380,7 +1672,7 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
 
 	mutex_lock(&mb5_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
 		cpu_relax();
 
 	writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
@@ -1388,7 +1680,7 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
 	writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
 	writeb(0, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
 
-	writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
 
 	if (!wait_for_completion_timeout(&mb5_transfer.work,
 				msecs_to_jiffies(20000))) {
@@ -1426,7 +1718,7 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
 
 	mutex_lock(&mb5_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
 		cpu_relax();
 
 	writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
@@ -1434,7 +1726,7 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
 	writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
 	writeb(*value, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
 
-	writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
 
 	if (!wait_for_completion_timeout(&mb5_transfer.work,
 				msecs_to_jiffies(20000))) {
@@ -1456,21 +1748,44 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
 void prcmu_ac_wake_req(void)
 {
 	u32 val;
+	u32 status;
 
 	mutex_lock(&mb0_transfer.ac_wake_lock);
 
-	val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ);
+	val = readl(PRCM_HOSTACCESS_REQ);
 	if (val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ)
 		goto unlock_and_return;
 
 	atomic_set(&ac_wake_req_state, 1);
 
-	writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
-		(_PRCMU_BASE + PRCM_HOSTACCESS_REQ));
+retry:
+	writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ), PRCM_HOSTACCESS_REQ);
 
 	if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
-			msecs_to_jiffies(20000))) {
-		pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
+			msecs_to_jiffies(5000))) {
+		pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
+			__func__);
+		goto unlock_and_return;
+	}
+
+	/*
+	 * The modem can generate an AC_WAKE_ACK, and then still go to sleep.
+	 * As a workaround, we wait, and then check that the modem is indeed
+	 * awake (in terms of the value of the PRCM_MOD_AWAKE_STATUS
+	 * register, which may not be the whole truth).
+	 */
+	udelay(400);
+	status = (readl(PRCM_MOD_AWAKE_STATUS) & BITS(0, 2));
+	if (status != (PRCM_MOD_AWAKE_STATUS_PRCM_MOD_AAPD_AWAKE |
+			PRCM_MOD_AWAKE_STATUS_PRCM_MOD_COREPD_AWAKE)) {
+		pr_err("prcmu: %s received ack, but modem not awake (0x%X).\n",
+			__func__, status);
+		udelay(1200);
+		writel(val, PRCM_HOSTACCESS_REQ);
+		if (wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
+				msecs_to_jiffies(5000)))
+			goto retry;
+		pr_crit("prcmu: %s timed out (5 s) waiting for AC_SLEEP_ACK.\n",
 			__func__);
 	}
 
@@ -1487,16 +1802,16 @@ void prcmu_ac_sleep_req()
 
 	mutex_lock(&mb0_transfer.ac_wake_lock);
 
-	val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ);
+	val = readl(PRCM_HOSTACCESS_REQ);
 	if (!(val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ))
 		goto unlock_and_return;
 
 	writel((val & ~PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
-		(_PRCMU_BASE + PRCM_HOSTACCESS_REQ));
+		PRCM_HOSTACCESS_REQ);
 
 	if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
-			msecs_to_jiffies(20000))) {
-		pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
+			msecs_to_jiffies(5000))) {
+		pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
 			__func__);
 	}
 
@@ -1506,21 +1821,32 @@ unlock_and_return:
 	mutex_unlock(&mb0_transfer.ac_wake_lock);
 }
 
-bool prcmu_is_ac_wake_requested(void)
+bool db8500_prcmu_is_ac_wake_requested(void)
 {
 	return (atomic_read(&ac_wake_req_state) != 0);
 }
 
 /**
- * prcmu_system_reset - System reset
+ * db8500_prcmu_system_reset - System reset
  *
- * Saves the reset reason code and then sets the APE_SOFRST register which
+ * Saves the reset reason code and then sets the APE_SOFTRST register which
  * fires interrupt to fw
  */
-void prcmu_system_reset(u16 reset_code)
+void db8500_prcmu_system_reset(u16 reset_code)
 {
 	writew(reset_code, (tcdm_base + PRCM_SW_RST_REASON));
-	writel(1, (_PRCMU_BASE + PRCM_APE_SOFTRST));
+	writel(1, PRCM_APE_SOFTRST);
+}
+
+/**
+ * db8500_prcmu_get_reset_code - Retrieve SW reset reason code
+ *
+ * Retrieves the reset reason code stored by prcmu_system_reset() before
+ * last restart.
+ */
+u16 db8500_prcmu_get_reset_code(void)
+{
+	return readw(tcdm_base + PRCM_SW_RST_REASON);
 }
 
 /**
@@ -1530,11 +1856,11 @@ void prcmu_modem_reset(void)
 {
 	mutex_lock(&mb1_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 		cpu_relax();
 
 	writeb(MB1H_RESET_MODEM, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb1_transfer.work);
 
 	/*
@@ -1551,11 +1877,11 @@ static void ack_dbb_wakeup(void)
 
 	spin_lock_irqsave(&mb0_transfer.lock, flags);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
 		cpu_relax();
 
 	writeb(MB0H_READ_WAKEUP_ACK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
-	writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
 
 	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
 }
@@ -1600,7 +1926,7 @@ static bool read_mailbox_0(void)
 		r = false;
 		break;
 	}
-	writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR);
 	return r;
 }
 
@@ -1613,7 +1939,7 @@ static bool read_mailbox_1(void)
 		PRCM_ACK_MB1_CURRENT_APE_OPP);
 	mb1_transfer.ack.ape_voltage_status = readb(tcdm_base +
 		PRCM_ACK_MB1_APE_VOLTAGE_STATUS);
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR);
 	complete(&mb1_transfer.work);
 	return false;
 }
@@ -1621,14 +1947,14 @@ static bool read_mailbox_1(void)
 static bool read_mailbox_2(void)
 {
 	mb2_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB2_DPS_STATUS);
-	writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR);
 	complete(&mb2_transfer.work);
 	return false;
 }
 
 static bool read_mailbox_3(void)
 {
-	writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
@@ -1643,6 +1969,11 @@ static bool read_mailbox_4(void)
 	case MB4H_HOTDOG:
 	case MB4H_HOTMON:
 	case MB4H_HOT_PERIOD:
+	case MB4H_A9WDOG_CONF:
+	case MB4H_A9WDOG_EN:
+	case MB4H_A9WDOG_DIS:
+	case MB4H_A9WDOG_LOAD:
+	case MB4H_A9WDOG_KICK:
 		break;
 	default:
 		print_unknown_header_warning(4, header);
@@ -1650,7 +1981,7 @@ static bool read_mailbox_4(void)
 		break;
 	}
 
-	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR);
 
 	if (do_complete)
 		complete(&mb4_transfer.work);
@@ -1662,20 +1993,20 @@ static bool read_mailbox_5(void)
 {
 	mb5_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB5_I2C_STATUS);
 	mb5_transfer.ack.value = readb(tcdm_base + PRCM_ACK_MB5_I2C_VAL);
-	writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR);
 	complete(&mb5_transfer.work);
 	return false;
 }
 
 static bool read_mailbox_6(void)
 {
-	writel(MBOX_BIT(6), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
 static bool read_mailbox_7(void)
 {
-	writel(MBOX_BIT(7), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
@@ -1696,7 +2027,7 @@ static irqreturn_t prcmu_irq_handler(int irq, void *data)
 	u8 n;
 	irqreturn_t r;
 
-	bits = (readl(_PRCMU_BASE + PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
+	bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
 	if (unlikely(!bits))
 		return IRQ_NONE;
 
@@ -1768,7 +2099,7 @@ static struct irq_chip prcmu_irq_chip = {
 	.irq_unmask	= prcmu_irq_unmask,
 };
 
-void __init prcmu_early_init(void)
+void __init db8500_prcmu_early_init(void)
 {
 	unsigned int i;
 
@@ -1826,6 +2157,16 @@ void __init prcmu_early_init(void)
 	}
 }
 
+static void __init db8500_prcmu_init_clkforce(void)
+{
+	u32 val;
+
+	val = readl(PRCM_A9PL_FORCE_CLKEN);
+	val &= ~(PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN |
+		PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN);
+	writel(val, (PRCM_A9PL_FORCE_CLKEN));
+}
+
 /*
  * Power domain switches (ePODs) modeled as regulators for the DB8500 SoC
  */
@@ -1861,7 +2202,42 @@ static struct regulator_consumer_supply db8500_vsmps2_consumers[] = {
 
 static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = {
 	REGULATOR_SUPPLY("vsupply", "b2r2.0"),
-	REGULATOR_SUPPLY("vsupply", "mcde.0"),
+	REGULATOR_SUPPLY("vsupply", "mcde"),
+};
+
+/* SVA MMDSP regulator switch */
+static struct regulator_consumer_supply db8500_svammdsp_consumers[] = {
+	REGULATOR_SUPPLY("sva-mmdsp", "cm_control"),
+};
+
+/* SVA pipe regulator switch */
+static struct regulator_consumer_supply db8500_svapipe_consumers[] = {
+	REGULATOR_SUPPLY("sva-pipe", "cm_control"),
+};
+
+/* SIA MMDSP regulator switch */
+static struct regulator_consumer_supply db8500_siammdsp_consumers[] = {
+	REGULATOR_SUPPLY("sia-mmdsp", "cm_control"),
+};
+
+/* SIA pipe regulator switch */
+static struct regulator_consumer_supply db8500_siapipe_consumers[] = {
+	REGULATOR_SUPPLY("sia-pipe", "cm_control"),
+};
+
+static struct regulator_consumer_supply db8500_sga_consumers[] = {
+	REGULATOR_SUPPLY("v-mali", NULL),
+};
+
+/* ESRAM1 and 2 regulator switch */
+static struct regulator_consumer_supply db8500_esram12_consumers[] = {
+	REGULATOR_SUPPLY("esram12", "cm_control"),
+};
+
+/* ESRAM3 and 4 regulator switch */
+static struct regulator_consumer_supply db8500_esram34_consumers[] = {
+	REGULATOR_SUPPLY("v-esram34", "mcde"),
+	REGULATOR_SUPPLY("esram34", "cm_control"),
 };
 
 static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
@@ -1923,6 +2299,8 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
 			.name = "db8500-sva-mmdsp",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.consumer_supplies = db8500_svammdsp_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_svammdsp_consumers),
 	},
 	[DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = {
 		.constraints = {
@@ -1937,6 +2315,8 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
 			.name = "db8500-sva-pipe",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.consumer_supplies = db8500_svapipe_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_svapipe_consumers),
 	},
 	[DB8500_REGULATOR_SWITCH_SIAMMDSP] = {
 		.supply_regulator = "db8500-vape",
@@ -1944,6 +2324,8 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
 			.name = "db8500-sia-mmdsp",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.consumer_supplies = db8500_siammdsp_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_siammdsp_consumers),
 	},
 	[DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = {
 		.constraints = {
@@ -1957,6 +2339,8 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
 			.name = "db8500-sia-pipe",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.consumer_supplies = db8500_siapipe_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_siapipe_consumers),
 	},
 	[DB8500_REGULATOR_SWITCH_SGA] = {
 		.supply_regulator = "db8500-vape",
@@ -1964,6 +2348,9 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
 			.name = "db8500-sga",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.consumer_supplies = db8500_sga_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_sga_consumers),
+
 	},
 	[DB8500_REGULATOR_SWITCH_B2R2_MCDE] = {
 		.supply_regulator = "db8500-vape",
@@ -1980,6 +2367,8 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
 			.name = "db8500-esram12",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.consumer_supplies = db8500_esram12_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_esram12_consumers),
 	},
 	[DB8500_REGULATOR_SWITCH_ESRAM12RET] = {
 		.constraints = {
@@ -1993,6 +2382,8 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
 			.name = "db8500-esram34",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.consumer_supplies = db8500_esram34_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_esram34_consumers),
 	},
 	[DB8500_REGULATOR_SWITCH_ESRAM34RET] = {
 		.constraints = {
@@ -2024,8 +2415,10 @@ static int __init db8500_prcmu_probe(struct platform_device *pdev)
 	if (ux500_is_svp())
 		return -ENODEV;
 
+	db8500_prcmu_init_clkforce();
+
 	/* Clean up the mailbox interrupts after pre-kernel code. */
-	writel(ALL_MBOX_BITS, (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
 
 	err = request_threaded_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler,
 		prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
diff --git a/drivers/mfd/db5500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h
index 9a8e9e4ddd3..ec22e9f15d3 100644
--- a/drivers/mfd/db5500-prcmu-regs.h
+++ b/drivers/mfd/dbx500-prcmu-regs.h
@@ -10,11 +10,49 @@
  * PRCM Unit registers
  */
 
-#ifndef __MACH_PRCMU_REGS_H
-#define __MACH_PRCMU_REGS_H
+#ifndef __DB8500_PRCMU_REGS_H
+#define __DB8500_PRCMU_REGS_H
 
 #include <mach/hardware.h>
 
+#define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
+
+#define PRCM_SVACLK_MGT_OFF		0x008
+#define PRCM_SIACLK_MGT_OFF		0x00C
+#define PRCM_SGACLK_MGT_OFF		0x014
+#define PRCM_UARTCLK_MGT_OFF		0x018
+#define PRCM_MSP02CLK_MGT_OFF		0x01C
+#define PRCM_I2CCLK_MGT_OFF		0x020
+#define PRCM_SDMMCCLK_MGT_OFF		0x024
+#define PRCM_SLIMCLK_MGT_OFF		0x028
+#define PRCM_PER1CLK_MGT_OFF		0x02C
+#define PRCM_PER2CLK_MGT_OFF		0x030
+#define PRCM_PER3CLK_MGT_OFF		0x034
+#define PRCM_PER5CLK_MGT_OFF		0x038
+#define PRCM_PER6CLK_MGT_OFF		0x03C
+#define PRCM_PER7CLK_MGT_OFF		0x040
+#define PRCM_PWMCLK_MGT_OFF		0x044 /* for DB5500 */
+#define PRCM_IRDACLK_MGT_OFF		0x048 /* for DB5500 */
+#define PRCM_IRRCCLK_MGT_OFF		0x04C /* for DB5500 */
+#define PRCM_LCDCLK_MGT_OFF		0x044
+#define PRCM_BMLCLK_MGT_OFF		0x04C
+#define PRCM_HSITXCLK_MGT_OFF		0x050
+#define PRCM_HSIRXCLK_MGT_OFF		0x054
+#define PRCM_HDMICLK_MGT_OFF		0x058
+#define PRCM_APEATCLK_MGT_OFF		0x05C
+#define PRCM_APETRACECLK_MGT_OFF	0x060
+#define PRCM_MCDECLK_MGT_OFF		0x064
+#define PRCM_IPI2CCLK_MGT_OFF		0x068
+#define PRCM_DSIALTCLK_MGT_OFF		0x06C
+#define PRCM_DMACLK_MGT_OFF		0x074
+#define PRCM_B2R2CLK_MGT_OFF		0x078
+#define PRCM_TVCLK_MGT_OFF		0x07C
+#define PRCM_UNIPROCLK_MGT_OFF		0x278
+#define PRCM_SSPCLK_MGT_OFF		0x280
+#define PRCM_RNGCLK_MGT_OFF		0x284
+#define PRCM_UICCCLK_MGT_OFF		0x27C
+#define PRCM_MSP1CLK_MGT_OFF		0x288
+
 #define PRCM_ARM_PLLDIVPS	(_PRCMU_BASE + 0x118)
 #define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE		0x3f
 #define PRCM_ARM_PLLDIVPS_MAX_MASK		0xf
@@ -30,11 +68,15 @@
 #define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON	0x100
 
 #define PRCM_ARMCLKFIX_MGT	(_PRCMU_BASE + 0x0)
+#define PRCM_A9PL_FORCE_CLKEN	(_PRCMU_BASE + 0x19C)
 #define PRCM_A9_RESETN_CLR	(_PRCMU_BASE + 0x1f4)
 #define PRCM_A9_RESETN_SET	(_PRCMU_BASE + 0x1f0)
 #define PRCM_ARM_LS_CLAMP	(_PRCMU_BASE + 0x30c)
 #define PRCM_SRAM_A9		(_PRCMU_BASE + 0x308)
 
+#define PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN BIT(0)
+#define PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN BIT(1)
+
 /* ARM WFI Standby signal register */
 #define PRCM_ARM_WFI_STANDBY    (_PRCMU_BASE + 0x130)
 #define PRCM_IOCR		(_PRCMU_BASE + 0x310)
@@ -61,12 +103,18 @@
 #define PRCM_ARMITVAL127TO96	(_PRCMU_BASE + 0x26C)
 
 #define PRCM_HOSTACCESS_REQ	(_PRCMU_BASE + 0x334)
+#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ 0x1
 #define ARM_WAKEUP_MODEM	0x1
 
-#define PRCM_ARM_IT1_CLEAR	(_PRCMU_BASE + 0x48C)
+#define PRCM_ARM_IT1_CLR	(_PRCMU_BASE + 0x48C)
 #define PRCM_ARM_IT1_VAL	(_PRCMU_BASE + 0x494)
 #define PRCM_HOLD_EVT		(_PRCMU_BASE + 0x174)
 
+#define PRCM_MOD_AWAKE_STATUS	(_PRCMU_BASE + 0x4A0)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_COREPD_AWAKE	BIT(0)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_AAPD_AWAKE	BIT(1)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_VMODEM_OFF_ISO	BIT(2)
+
 #define PRCM_ITSTATUS0		(_PRCMU_BASE + 0x148)
 #define PRCM_ITSTATUS1		(_PRCMU_BASE + 0x150)
 #define PRCM_ITSTATUS2		(_PRCMU_BASE + 0x158)
@@ -87,16 +135,21 @@
 #define PRCM_PLLDSI_FREQ           (_PRCMU_BASE + 0x500)
 #define PRCM_PLLDSI_ENABLE         (_PRCMU_BASE + 0x504)
 #define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
-#define PRCM_LCDCLK_MGT            (_PRCMU_BASE + 0x044)
-#define PRCM_MCDECLK_MGT           (_PRCMU_BASE + 0x064)
-#define PRCM_HDMICLK_MGT           (_PRCMU_BASE + 0x058)
-#define PRCM_TVCLK_MGT             (_PRCMU_BASE + 0x07c)
+#define PRCM_LCDCLK_MGT            (_PRCMU_BASE + PRCM_LCDCLK_MGT_OFF)
+#define PRCM_MCDECLK_MGT           (_PRCMU_BASE + PRCM_MCDECLK_MGT_OFF)
+#define PRCM_HDMICLK_MGT           (_PRCMU_BASE + PRCM_HDMICLK_MGT_OFF)
+#define PRCM_TVCLK_MGT             (_PRCMU_BASE + PRCM_TVCLK_MGT_OFF)
 #define PRCM_DSI_PLLOUT_SEL        (_PRCMU_BASE + 0x530)
 #define PRCM_DSITVCLK_DIV          (_PRCMU_BASE + 0x52C)
 #define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
 #define PRCM_APE_RESETN_SET        (_PRCMU_BASE + 0x1E4)
 #define PRCM_APE_RESETN_CLR        (_PRCMU_BASE + 0x1E8)
+
 #define PRCM_CLKOCR		   (_PRCMU_BASE + 0x1CC)
+#define PRCM_CLKOCR_CLKOUT0_REF_CLK	(1 << 0)
+#define PRCM_CLKOCR_CLKOUT0_MASK	BITS(0, 13)
+#define PRCM_CLKOCR_CLKOUT1_REF_CLK	(1 << 16)
+#define PRCM_CLKOCR_CLKOUT1_MASK	BITS(16, 29)
 
 /* ePOD and memory power signal control registers */
 #define PRCM_EPOD_C_SET            (_PRCMU_BASE + 0x410)
@@ -111,5 +164,41 @@
 #define PRCM_GPIOCR_DBG_STM_MOD_CMD1            0x800
 #define PRCM_GPIOCR_DBG_UARTMOD_CMD0            0x1
 
+/* PRCMU HW semaphore */
+#define PRCM_SEM                   (_PRCMU_BASE + 0x400)
+#define PRCM_SEM_PRCM_SEM BIT(0)
+
+#define PRCM_TCR                   (_PRCMU_BASE + 0x1C8)
+#define PRCM_TCR_TENSEL_MASK       BITS(0, 7)
+#define PRCM_TCR_STOP_TIMERS       BIT(16)
+#define PRCM_TCR_DOZE_MODE         BIT(17)
+
+#define PRCM_CLKOCR_CLKODIV0_SHIFT	0
+#define PRCM_CLKOCR_CLKODIV0_MASK	BITS(0, 5)
+#define PRCM_CLKOCR_CLKOSEL0_SHIFT	6
+#define PRCM_CLKOCR_CLKOSEL0_MASK	BITS(6, 8)
+#define PRCM_CLKOCR_CLKODIV1_SHIFT	16
+#define PRCM_CLKOCR_CLKODIV1_MASK	BITS(16, 21)
+#define PRCM_CLKOCR_CLKOSEL1_SHIFT	22
+#define PRCM_CLKOCR_CLKOSEL1_MASK	BITS(22, 24)
+#define PRCM_CLKOCR_CLK1TYPE		BIT(28)
+
+#define PRCM_CLK_MGT_CLKPLLDIV_MASK	BITS(0, 4)
+#define PRCM_CLK_MGT_CLKPLLSW_MASK	BITS(5, 7)
+#define PRCM_CLK_MGT_CLKEN		BIT(8)
+
+/* GPIOCR register */
+#define PRCM_GPIOCR_SPI2_SELECT BIT(23)
+
+#define PRCM_DDR_SUBSYS_APE_MINBW	(_PRCMU_BASE + 0x438)
+#define PRCM_CGATING_BYPASS		(_PRCMU_BASE + 0x134)
+#define PRCM_CGATING_BYPASS_ICN2	BIT(6)
+
+/* Miscellaneous unit registers */
+#define PRCM_RESOUTN_SET		(_PRCMU_BASE + 0x214)
+#define PRCM_RESOUTN_CLR		(_PRCMU_BASE + 0x218)
+
+/* System reset register */
+#define PRCM_APE_SOFTRST		(_PRCMU_BASE + 0x228)
 
-#endif /* __MACH_PRCMU__REGS_H */
+#endif /* __DB8500_PRCMU_REGS_H */
diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 3d4a861976c..8ad88da647b 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -13,6 +13,7 @@
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/module.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c
new file mode 100644
index 00000000000..97c27762174
--- /dev/null
+++ b/drivers/mfd/intel_msic.c
@@ -0,0 +1,502 @@
+/*
+ * Driver for Intel MSIC
+ *
+ * Copyright (C) 2011, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel_msic.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/intel_scu_ipc.h>
+
+#define MSIC_VENDOR(id)		((id >> 6) & 3)
+#define MSIC_VERSION(id)	(id & 0x3f)
+#define MSIC_MAJOR(id)		('A' + ((id >> 3) & 7))
+#define MSIC_MINOR(id)		(id & 7)
+
+/*
+ * MSIC interrupt tree is readable from SRAM at INTEL_MSIC_IRQ_PHYS_BASE.
+ * Since IRQ block starts from address 0x002 we need to substract that from
+ * the actual IRQ status register address.
+ */
+#define MSIC_IRQ_STATUS(x)	(INTEL_MSIC_IRQ_PHYS_BASE + ((x) - 2))
+#define MSIC_IRQ_STATUS_ACCDET	MSIC_IRQ_STATUS(INTEL_MSIC_ACCDET)
+
+/*
+ * The SCU hardware has limitation of 16 bytes per read/write buffer on
+ * Medfield.
+ */
+#define SCU_IPC_RWBUF_LIMIT	16
+
+/**
+ * struct intel_msic - an MSIC MFD instance
+ * @pdev: pointer to the platform device
+ * @vendor: vendor ID
+ * @version: chip version
+ * @irq_base: base address of the mapped MSIC SRAM interrupt tree
+ */
+struct intel_msic {
+	struct platform_device		*pdev;
+	unsigned			vendor;
+	unsigned			version;
+	void __iomem			*irq_base;
+};
+
+static struct resource msic_touch_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_adc_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_battery_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_gpio_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_audio_resources[] = {
+	{
+		.name		= "IRQ",
+		.flags		= IORESOURCE_IRQ,
+	},
+	/*
+	 * We will pass IRQ_BASE to the driver now but this can be removed
+	 * when/if the driver starts to use intel_msic_irq_read().
+	 */
+	{
+		.name		= "IRQ_BASE",
+		.flags		= IORESOURCE_MEM,
+		.start		= MSIC_IRQ_STATUS_ACCDET,
+		.end		= MSIC_IRQ_STATUS_ACCDET,
+	},
+};
+
+static struct resource msic_hdmi_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_thermal_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_power_btn_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_ocd_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+/*
+ * Devices that are part of the MSIC and are available via firmware
+ * populated SFI DEVS table.
+ */
+static struct mfd_cell msic_devs[] = {
+	[INTEL_MSIC_BLOCK_TOUCH]	= {
+		.name			= "msic_touch",
+		.num_resources		= ARRAY_SIZE(msic_touch_resources),
+		.resources		= msic_touch_resources,
+	},
+	[INTEL_MSIC_BLOCK_ADC]		= {
+		.name			= "msic_adc",
+		.num_resources		= ARRAY_SIZE(msic_adc_resources),
+		.resources		= msic_adc_resources,
+	},
+	[INTEL_MSIC_BLOCK_BATTERY]	= {
+		.name			= "msic_battery",
+		.num_resources		= ARRAY_SIZE(msic_battery_resources),
+		.resources		= msic_battery_resources,
+	},
+	[INTEL_MSIC_BLOCK_GPIO]		= {
+		.name			= "msic_gpio",
+		.num_resources		= ARRAY_SIZE(msic_gpio_resources),
+		.resources		= msic_gpio_resources,
+	},
+	[INTEL_MSIC_BLOCK_AUDIO]	= {
+		.name			= "msic_audio",
+		.num_resources		= ARRAY_SIZE(msic_audio_resources),
+		.resources		= msic_audio_resources,
+	},
+	[INTEL_MSIC_BLOCK_HDMI]		= {
+		.name			= "msic_hdmi",
+		.num_resources		= ARRAY_SIZE(msic_hdmi_resources),
+		.resources		= msic_hdmi_resources,
+	},
+	[INTEL_MSIC_BLOCK_THERMAL]	= {
+		.name			= "msic_thermal",
+		.num_resources		= ARRAY_SIZE(msic_thermal_resources),
+		.resources		= msic_thermal_resources,
+	},
+	[INTEL_MSIC_BLOCK_POWER_BTN]	= {
+		.name			= "msic_power_btn",
+		.num_resources		= ARRAY_SIZE(msic_power_btn_resources),
+		.resources		= msic_power_btn_resources,
+	},
+	[INTEL_MSIC_BLOCK_OCD]		= {
+		.name			= "msic_ocd",
+		.num_resources		= ARRAY_SIZE(msic_ocd_resources),
+		.resources		= msic_ocd_resources,
+	},
+};
+
+/*
+ * Other MSIC related devices which are not directly available via SFI DEVS
+ * table. These can be pseudo devices, regulators etc. which are needed for
+ * different purposes.
+ *
+ * These devices appear only after the MSIC driver itself is initialized so
+ * we can guarantee that the SCU IPC interface is ready.
+ */
+static struct mfd_cell msic_other_devs[] = {
+	/* Audio codec in the MSIC */
+	{
+		.id			= -1,
+		.name			= "sn95031",
+	},
+};
+
+/**
+ * intel_msic_reg_read - read a single MSIC register
+ * @reg: register to read
+ * @val: register value is placed here
+ *
+ * Read a single register from MSIC. Returns %0 on success and negative
+ * errno in case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_reg_read(unsigned short reg, u8 *val)
+{
+	return intel_scu_ipc_ioread8(reg, val);
+}
+EXPORT_SYMBOL_GPL(intel_msic_reg_read);
+
+/**
+ * intel_msic_reg_write - write a single MSIC register
+ * @reg: register to write
+ * @val: value to write to that register
+ *
+ * Write a single MSIC register. Returns 0 on success and negative
+ * errno in case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_reg_write(unsigned short reg, u8 val)
+{
+	return intel_scu_ipc_iowrite8(reg, val);
+}
+EXPORT_SYMBOL_GPL(intel_msic_reg_write);
+
+/**
+ * intel_msic_reg_update - update a single MSIC register
+ * @reg: register to update
+ * @val: value to write to the register
+ * @mask: specifies which of the bits are updated (%0 = don't update,
+ *        %1 = update)
+ *
+ * Perform an update to a register @reg. @mask is used to specify which
+ * bits are updated. Returns %0 in case of success and negative errno in
+ * case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask)
+{
+	return intel_scu_ipc_update_register(reg, val, mask);
+}
+EXPORT_SYMBOL_GPL(intel_msic_reg_update);
+
+/**
+ * intel_msic_bulk_read - read an array of registers
+ * @reg: array of register addresses to read
+ * @buf: array where the read values are placed
+ * @count: number of registers to read
+ *
+ * Function reads @count registers from the MSIC using addresses passed in
+ * @reg. Read values are placed in @buf. Reads are performed atomically
+ * wrt. MSIC.
+ *
+ * Returns %0 in case of success and negative errno in case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count)
+{
+	if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
+		return -EINVAL;
+
+	return intel_scu_ipc_readv(reg, buf, count);
+}
+EXPORT_SYMBOL_GPL(intel_msic_bulk_read);
+
+/**
+ * intel_msic_bulk_write - write an array of values to the MSIC registers
+ * @reg: array of registers to write
+ * @buf: values to write to each register
+ * @count: number of registers to write
+ *
+ * Function writes @count registers in @buf to MSIC. Writes are performed
+ * atomically wrt MSIC. Returns %0 in case of success and negative errno in
+ * case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count)
+{
+	if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
+		return -EINVAL;
+
+	return intel_scu_ipc_writev(reg, buf, count);
+}
+EXPORT_SYMBOL_GPL(intel_msic_bulk_write);
+
+/**
+ * intel_msic_irq_read - read a register from an MSIC interrupt tree
+ * @msic: MSIC instance
+ * @reg: interrupt register (between %INTEL_MSIC_IRQLVL1 and
+ *	 %INTEL_MSIC_RESETIRQ2)
+ * @val: value of the register is placed here
+ *
+ * This function can be used by an MSIC subdevice interrupt handler to read
+ * a register value from the MSIC interrupt tree. In this way subdevice
+ * drivers don't have to map in the interrupt tree themselves but can just
+ * call this function instead.
+ *
+ * Function doesn't sleep and is callable from interrupt context.
+ *
+ * Returns %-EINVAL if @reg is outside of the allowed register region.
+ */
+int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg, u8 *val)
+{
+	if (WARN_ON(reg < INTEL_MSIC_IRQLVL1 || reg > INTEL_MSIC_RESETIRQ2))
+		return -EINVAL;
+
+	*val = readb(msic->irq_base + (reg - INTEL_MSIC_IRQLVL1));
+	return 0;
+}
+EXPORT_SYMBOL_GPL(intel_msic_irq_read);
+
+static int __devinit intel_msic_init_devices(struct intel_msic *msic)
+{
+	struct platform_device *pdev = msic->pdev;
+	struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
+	int ret, i;
+
+	if (pdata->gpio) {
+		struct mfd_cell *cell = &msic_devs[INTEL_MSIC_BLOCK_GPIO];
+
+		cell->platform_data = pdata->gpio;
+		cell->pdata_size = sizeof(*pdata->gpio);
+	}
+
+	if (pdata->ocd) {
+		unsigned gpio = pdata->ocd->gpio;
+
+		ret = gpio_request_one(gpio, GPIOF_IN, "ocd_gpio");
+		if (ret) {
+			dev_err(&pdev->dev, "failed to register OCD GPIO\n");
+			return ret;
+		}
+
+		ret = gpio_to_irq(gpio);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "no IRQ number for OCD GPIO\n");
+			gpio_free(gpio);
+			return ret;
+		}
+
+		/* Update the IRQ number for the OCD */
+		pdata->irq[INTEL_MSIC_BLOCK_OCD] = ret;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(msic_devs); i++) {
+		if (!pdata->irq[i])
+			continue;
+
+		ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL,
+				      pdata->irq[i]);
+		if (ret)
+			goto fail;
+	}
+
+	ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs,
+			      ARRAY_SIZE(msic_other_devs), NULL, 0);
+	if (ret)
+		goto fail;
+
+	return 0;
+
+fail:
+	mfd_remove_devices(&pdev->dev);
+	if (pdata->ocd)
+		gpio_free(pdata->ocd->gpio);
+
+	return ret;
+}
+
+static void __devexit intel_msic_remove_devices(struct intel_msic *msic)
+{
+	struct platform_device *pdev = msic->pdev;
+	struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
+
+	mfd_remove_devices(&pdev->dev);
+
+	if (pdata->ocd)
+		gpio_free(pdata->ocd->gpio);
+}
+
+static int __devinit intel_msic_probe(struct platform_device *pdev)
+{
+	struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
+	struct intel_msic *msic;
+	struct resource *res;
+	u8 id0, id1;
+	int ret;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data passed\n");
+		return -EINVAL;
+	}
+
+	/* First validate that we have an MSIC in place */
+	ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID0, &id0);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to identify the MSIC chip (ID0)\n");
+		return -ENXIO;
+	}
+
+	ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID1, &id1);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to identify the MSIC chip (ID1)\n");
+		return -ENXIO;
+	}
+
+	if (MSIC_VENDOR(id0) != MSIC_VENDOR(id1)) {
+		dev_err(&pdev->dev, "invalid vendor ID: %x, %x\n", id0, id1);
+		return -ENXIO;
+	}
+
+	msic = kzalloc(sizeof(*msic), GFP_KERNEL);
+	if (!msic)
+		return -ENOMEM;
+
+	msic->vendor = MSIC_VENDOR(id0);
+	msic->version = MSIC_VERSION(id0);
+	msic->pdev = pdev;
+
+	/*
+	 * Map in the MSIC interrupt tree area in SRAM. This is exposed to
+	 * the clients via intel_msic_irq_read().
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get SRAM iomem resource\n");
+		ret = -ENODEV;
+		goto fail_free_msic;
+	}
+
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (!res) {
+		ret = -EBUSY;
+		goto fail_free_msic;
+	}
+
+	msic->irq_base = ioremap_nocache(res->start, resource_size(res));
+	if (!msic->irq_base) {
+		dev_err(&pdev->dev, "failed to map SRAM memory\n");
+		ret = -ENOMEM;
+		goto fail_release_region;
+	}
+
+	platform_set_drvdata(pdev, msic);
+
+	ret = intel_msic_init_devices(msic);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize MSIC devices\n");
+		goto fail_unmap_mem;
+	}
+
+	dev_info(&pdev->dev, "Intel MSIC version %c%d (vendor %#x)\n",
+		 MSIC_MAJOR(msic->version), MSIC_MINOR(msic->version),
+		 msic->vendor);
+
+	return 0;
+
+fail_unmap_mem:
+	iounmap(msic->irq_base);
+fail_release_region:
+	release_mem_region(res->start, resource_size(res));
+fail_free_msic:
+	kfree(msic);
+
+	return ret;
+}
+
+static int __devexit intel_msic_remove(struct platform_device *pdev)
+{
+	struct intel_msic *msic = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	intel_msic_remove_devices(msic);
+	platform_set_drvdata(pdev, NULL);
+	iounmap(msic->irq_base);
+	release_mem_region(res->start, resource_size(res));
+	kfree(msic);
+
+	return 0;
+}
+
+static struct platform_driver intel_msic_driver = {
+	.probe		= intel_msic_probe,
+	.remove		= __devexit_p(intel_msic_remove),
+	.driver		= {
+		.name	= "intel_msic",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init intel_msic_init(void)
+{
+	return platform_driver_register(&intel_msic_driver);
+}
+module_init(intel_msic_init);
+
+static void __exit intel_msic_exit(void)
+{
+	platform_driver_unregister(&intel_msic_driver);
+}
+module_exit(intel_msic_exit);
+
+MODULE_DESCRIPTION("Driver for Intel MSIC");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c
index 563654c9b19..1e9ee533eac 100644
--- a/drivers/mfd/jz4740-adc.c
+++ b/drivers/mfd/jz4740-adc.c
@@ -328,7 +328,7 @@ static int __devexit jz4740_adc_remove(struct platform_device *pdev)
 	return 0;
 }
 
-struct platform_driver jz4740_adc_driver = {
+static struct platform_driver jz4740_adc_driver = {
 	.probe	= jz4740_adc_probe,
 	.remove = __devexit_p(jz4740_adc_remove),
 	.driver = {
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index f83103b8970..5be53ae9b61 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -23,7 +23,9 @@
 
 #include <linux/slab.h>
 #include <linux/i2c.h>
+#include <linux/interrupt.h>
 #include <linux/pm_runtime.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/max8997.h>
@@ -142,7 +144,6 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
 
 	max8997->irq_base = pdata->irq_base;
 	max8997->ono = pdata->ono;
-	max8997->wakeup = pdata->wakeup;
 
 	mutex_init(&max8997->iolock);
 
@@ -169,6 +170,9 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
 	if (ret < 0)
 		goto err_mfd;
 
+	/* MAX8997 has a power button input. */
+	device_init_wakeup(max8997->dev, pdata->wakeup);
+
 	return ret;
 
 err_mfd:
@@ -398,7 +402,29 @@ static int max8997_restore(struct device *dev)
 	return 0;
 }
 
+static int max8997_suspend(struct device *dev)
+{
+	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
+
+	if (device_may_wakeup(dev))
+		irq_set_irq_wake(max8997->irq, 1);
+	return 0;
+}
+
+static int max8997_resume(struct device *dev)
+{
+	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
+
+	if (device_may_wakeup(dev))
+		irq_set_irq_wake(max8997->irq, 0);
+	return max8997_irq_resume(max8997);
+}
+
 const struct dev_pm_ops max8997_pm = {
+	.suspend = max8997_suspend,
+	.resume = max8997_resume,
 	.freeze = max8997_freeze,
 	.restore = max8997_restore,
 };
diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 7e4d44bf92a..e9619acc023 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -26,20 +26,10 @@ struct mc13xxx {
 
 	irq_handler_t irqhandler[MC13XXX_NUM_IRQ];
 	void *irqdata[MC13XXX_NUM_IRQ];
-};
-
-struct mc13783 {
-	struct mc13xxx mc13xxx;
 
 	int adcflags;
 };
 
-struct mc13xxx *mc13783_to_mc13xxx(struct mc13783 *mc13783)
-{
-	return &mc13783->mc13xxx;
-}
-EXPORT_SYMBOL(mc13783_to_mc13xxx);
-
 #define MC13XXX_IRQSTAT0	0
 #define MC13XXX_IRQSTAT0_ADCDONEI	(1 << 0)
 #define MC13XXX_IRQSTAT0_ADCBISDONEI	(1 << 1)
@@ -136,14 +126,14 @@ EXPORT_SYMBOL(mc13783_to_mc13xxx);
 #define MC13XXX_REVISION_FAB		(0x03 << 11)
 #define MC13XXX_REVISION_ICIDCODE	(0x3f << 13)
 
-#define MC13783_ADC1		44
-#define MC13783_ADC1_ADEN		(1 << 0)
-#define MC13783_ADC1_RAND		(1 << 1)
-#define MC13783_ADC1_ADSEL		(1 << 3)
-#define MC13783_ADC1_ASC		(1 << 20)
-#define MC13783_ADC1_ADTRIGIGN		(1 << 21)
+#define MC13XXX_ADC1		44
+#define MC13XXX_ADC1_ADEN		(1 << 0)
+#define MC13XXX_ADC1_RAND		(1 << 1)
+#define MC13XXX_ADC1_ADSEL		(1 << 3)
+#define MC13XXX_ADC1_ASC		(1 << 20)
+#define MC13XXX_ADC1_ADTRIGIGN		(1 << 21)
 
-#define MC13783_ADC2		45
+#define MC13XXX_ADC2		45
 
 #define MC13XXX_NUMREGS 0x3f
 
@@ -487,7 +477,7 @@ enum mc13xxx_id {
 	MC13XXX_ID_INVALID,
 };
 
-const char *mc13xxx_chipname[] = {
+static const char *mc13xxx_chipname[] = {
 	[MC13XXX_ID_MC13783] = "mc13783",
 	[MC13XXX_ID_MC13892] = "mc13892",
 };
@@ -558,8 +548,6 @@ static const char *mc13xxx_get_chipname(struct mc13xxx *mc13xxx)
 	return mc13xxx_chipname[devid->driver_data];
 }
 
-#include <linux/mfd/mc13783.h>
-
 int mc13xxx_get_flags(struct mc13xxx *mc13xxx)
 {
 	struct mc13xxx_platform_data *pdata =
@@ -569,15 +557,15 @@ int mc13xxx_get_flags(struct mc13xxx *mc13xxx)
 }
 EXPORT_SYMBOL(mc13xxx_get_flags);
 
-#define MC13783_ADC1_CHAN0_SHIFT	5
-#define MC13783_ADC1_CHAN1_SHIFT	8
+#define MC13XXX_ADC1_CHAN0_SHIFT	5
+#define MC13XXX_ADC1_CHAN1_SHIFT	8
 
 struct mc13xxx_adcdone_data {
 	struct mc13xxx *mc13xxx;
 	struct completion done;
 };
 
-static irqreturn_t mc13783_handler_adcdone(int irq, void *data)
+static irqreturn_t mc13xxx_handler_adcdone(int irq, void *data)
 {
 	struct mc13xxx_adcdone_data *adcdone_data = data;
 
@@ -588,12 +576,11 @@ static irqreturn_t mc13783_handler_adcdone(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-#define MC13783_ADC_WORKING (1 << 0)
+#define MC13XXX_ADC_WORKING (1 << 0)
 
-int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
+int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
 		unsigned int channel, unsigned int *sample)
 {
-	struct mc13xxx *mc13xxx = &mc13783->mc13xxx;
 	u32 adc0, adc1, old_adc0;
 	int i, ret;
 	struct mc13xxx_adcdone_data adcdone_data = {
@@ -605,51 +592,51 @@ int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
 
 	mc13xxx_lock(mc13xxx);
 
-	if (mc13783->adcflags & MC13783_ADC_WORKING) {
+	if (mc13xxx->adcflags & MC13XXX_ADC_WORKING) {
 		ret = -EBUSY;
 		goto out;
 	}
 
-	mc13783->adcflags |= MC13783_ADC_WORKING;
+	mc13xxx->adcflags |= MC13XXX_ADC_WORKING;
 
-	mc13xxx_reg_read(mc13xxx, MC13783_ADC0, &old_adc0);
+	mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0);
 
-	adc0 = MC13783_ADC0_ADINC1 | MC13783_ADC0_ADINC2;
-	adc1 = MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN | MC13783_ADC1_ASC;
+	adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2;
+	adc1 = MC13XXX_ADC1_ADEN | MC13XXX_ADC1_ADTRIGIGN | MC13XXX_ADC1_ASC;
 
 	if (channel > 7)
-		adc1 |= MC13783_ADC1_ADSEL;
+		adc1 |= MC13XXX_ADC1_ADSEL;
 
 	switch (mode) {
-	case MC13783_ADC_MODE_TS:
-		adc0 |= MC13783_ADC0_ADREFEN | MC13783_ADC0_TSMOD0 |
-			MC13783_ADC0_TSMOD1;
-		adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT;
+	case MC13XXX_ADC_MODE_TS:
+		adc0 |= MC13XXX_ADC0_ADREFEN | MC13XXX_ADC0_TSMOD0 |
+			MC13XXX_ADC0_TSMOD1;
+		adc1 |= 4 << MC13XXX_ADC1_CHAN1_SHIFT;
 		break;
 
-	case MC13783_ADC_MODE_SINGLE_CHAN:
-		adc0 |= old_adc0 & MC13783_ADC0_TSMOD_MASK;
-		adc1 |= (channel & 0x7) << MC13783_ADC1_CHAN0_SHIFT;
-		adc1 |= MC13783_ADC1_RAND;
+	case MC13XXX_ADC_MODE_SINGLE_CHAN:
+		adc0 |= old_adc0 & MC13XXX_ADC0_TSMOD_MASK;
+		adc1 |= (channel & 0x7) << MC13XXX_ADC1_CHAN0_SHIFT;
+		adc1 |= MC13XXX_ADC1_RAND;
 		break;
 
-	case MC13783_ADC_MODE_MULT_CHAN:
-		adc0 |= old_adc0 & MC13783_ADC0_TSMOD_MASK;
-		adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT;
+	case MC13XXX_ADC_MODE_MULT_CHAN:
+		adc0 |= old_adc0 & MC13XXX_ADC0_TSMOD_MASK;
+		adc1 |= 4 << MC13XXX_ADC1_CHAN1_SHIFT;
 		break;
 
 	default:
-		mc13783_unlock(mc13783);
+		mc13xxx_unlock(mc13xxx);
 		return -EINVAL;
 	}
 
-	dev_dbg(&mc13783->mc13xxx.spidev->dev, "%s: request irq\n", __func__);
-	mc13xxx_irq_request(mc13xxx, MC13783_IRQ_ADCDONE,
-			mc13783_handler_adcdone, __func__, &adcdone_data);
-	mc13xxx_irq_ack(mc13xxx, MC13783_IRQ_ADCDONE);
+	dev_dbg(&mc13xxx->spidev->dev, "%s: request irq\n", __func__);
+	mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE,
+			mc13xxx_handler_adcdone, __func__, &adcdone_data);
+	mc13xxx_irq_ack(mc13xxx, MC13XXX_IRQ_ADCDONE);
 
-	mc13xxx_reg_write(mc13xxx, MC13783_ADC0, adc0);
-	mc13xxx_reg_write(mc13xxx, MC13783_ADC1, adc1);
+	mc13xxx_reg_write(mc13xxx, MC13XXX_ADC0, adc0);
+	mc13xxx_reg_write(mc13xxx, MC13XXX_ADC1, adc1);
 
 	mc13xxx_unlock(mc13xxx);
 
@@ -660,27 +647,27 @@ int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
 
 	mc13xxx_lock(mc13xxx);
 
-	mc13xxx_irq_free(mc13xxx, MC13783_IRQ_ADCDONE, &adcdone_data);
+	mc13xxx_irq_free(mc13xxx, MC13XXX_IRQ_ADCDONE, &adcdone_data);
 
 	if (ret > 0)
 		for (i = 0; i < 4; ++i) {
 			ret = mc13xxx_reg_read(mc13xxx,
-					MC13783_ADC2, &sample[i]);
+					MC13XXX_ADC2, &sample[i]);
 			if (ret)
 				break;
 		}
 
-	if (mode == MC13783_ADC_MODE_TS)
+	if (mode == MC13XXX_ADC_MODE_TS)
 		/* restore TSMOD */
-		mc13xxx_reg_write(mc13xxx, MC13783_ADC0, old_adc0);
+		mc13xxx_reg_write(mc13xxx, MC13XXX_ADC0, old_adc0);
 
-	mc13783->adcflags &= ~MC13783_ADC_WORKING;
+	mc13xxx->adcflags &= ~MC13XXX_ADC_WORKING;
 out:
 	mc13xxx_unlock(mc13xxx);
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(mc13783_adc_do_conversion);
+EXPORT_SYMBOL_GPL(mc13xxx_adc_do_conversion);
 
 static int mc13xxx_add_subdevice_pdata(struct mc13xxx *mc13xxx,
 		const char *format, void *pdata, size_t pdata_size)
@@ -716,6 +703,11 @@ static int mc13xxx_probe(struct spi_device *spi)
 	enum mc13xxx_id id;
 	int ret;
 
+	if (!pdata) {
+		dev_err(&spi->dev, "invalid platform data\n");
+		return -EINVAL;
+	}
+
 	mc13xxx = kzalloc(sizeof(*mc13xxx), GFP_KERNEL);
 	if (!mc13xxx)
 		return -ENOMEM;
@@ -763,10 +755,8 @@ err_revision:
 	if (pdata->flags & MC13XXX_USE_CODEC)
 		mc13xxx_add_subdevice(mc13xxx, "%s-codec");
 
-	if (pdata->flags & MC13XXX_USE_REGULATOR) {
-		mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator",
-				&pdata->regulators, sizeof(pdata->regulators));
-	}
+	mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator",
+		&pdata->regulators, sizeof(pdata->regulators));
 
 	if (pdata->flags & MC13XXX_USE_RTC)
 		mc13xxx_add_subdevice(mc13xxx, "%s-rtc");
@@ -774,10 +764,14 @@ err_revision:
 	if (pdata->flags & MC13XXX_USE_TOUCHSCREEN)
 		mc13xxx_add_subdevice(mc13xxx, "%s-ts");
 
-	if (pdata->flags & MC13XXX_USE_LED)
+	if (pdata->leds)
 		mc13xxx_add_subdevice_pdata(mc13xxx, "%s-led",
 				pdata->leds, sizeof(*pdata->leds));
 
+	if (pdata->buttons)
+		mc13xxx_add_subdevice_pdata(mc13xxx, "%s-pwrbutton",
+				pdata->buttons, sizeof(*pdata->buttons));
+
 	return 0;
 }
 
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index 9cee8e7f0bc..cb4910ac4d1 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -44,7 +44,7 @@
 
 #include <asm/mach/irq.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <plat/menelaus.h>
 
 #define DRIVER_NAME			"menelaus"
@@ -1226,7 +1226,7 @@ static int menelaus_probe(struct i2c_client *client,
 	menelaus_write_reg(MENELAUS_MCT_CTRL1, 0x73);
 
 	if (client->irq > 0) {
-		err = request_irq(client->irq, menelaus_irq, IRQF_DISABLED,
+		err = request_irq(client->irq, menelaus_irq, 0,
 				  DRIVER_NAME, menelaus);
 		if (err) {
 			dev_dbg(&client->dev,  "can't get IRQ %d, err %d\n",
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 0902523af62..0f5922812bf 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -17,6 +17,7 @@
 #include <linux/mfd/core.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 int mfd_cell_enable(struct platform_device *pdev)
 {
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 57868416c76..ff1a7e741ec 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -23,45 +23,22 @@
 #include <linux/i2c.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/err.h>
 
 #include <linux/mfd/pcf50633/core.h>
 
-static int __pcf50633_read(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
-{
-	int ret;
-
-	ret = i2c_smbus_read_i2c_block_data(pcf->i2c_client, reg,
-				num, data);
-	if (ret < 0)
-		dev_err(pcf->dev, "Error reading %d regs at %d\n", num, reg);
-
-	return ret;
-}
-
-static int __pcf50633_write(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
-{
-	int ret;
-
-	ret = i2c_smbus_write_i2c_block_data(pcf->i2c_client, reg,
-				num, data);
-	if (ret < 0)
-		dev_err(pcf->dev, "Error writing %d regs at %d\n", num, reg);
-
-	return ret;
-
-}
-
 /* Read a block of up to 32 regs  */
 int pcf50633_read_block(struct pcf50633 *pcf, u8 reg,
 					int nr_regs, u8 *data)
 {
 	int ret;
 
-	mutex_lock(&pcf->lock);
-	ret = __pcf50633_read(pcf, reg, nr_regs, data);
-	mutex_unlock(&pcf->lock);
+	ret = regmap_raw_read(pcf->regmap, reg, data, nr_regs);
+	if (ret != 0)
+		return ret;
 
-	return ret;
+	return nr_regs;
 }
 EXPORT_SYMBOL_GPL(pcf50633_read_block);
 
@@ -71,21 +48,22 @@ int pcf50633_write_block(struct pcf50633 *pcf , u8 reg,
 {
 	int ret;
 
-	mutex_lock(&pcf->lock);
-	ret = __pcf50633_write(pcf, reg, nr_regs, data);
-	mutex_unlock(&pcf->lock);
+	ret = regmap_raw_write(pcf->regmap, reg, data, nr_regs);
+	if (ret != 0)
+		return ret;
 
-	return ret;
+	return nr_regs;
 }
 EXPORT_SYMBOL_GPL(pcf50633_write_block);
 
 u8 pcf50633_reg_read(struct pcf50633 *pcf, u8 reg)
 {
-	u8 val;
+	unsigned int val;
+	int ret;
 
-	mutex_lock(&pcf->lock);
-	__pcf50633_read(pcf, reg, 1, &val);
-	mutex_unlock(&pcf->lock);
+	ret = regmap_read(pcf->regmap, reg, &val);
+	if (ret < 0)
+		return -1;
 
 	return val;
 }
@@ -93,56 +71,19 @@ EXPORT_SYMBOL_GPL(pcf50633_reg_read);
 
 int pcf50633_reg_write(struct pcf50633 *pcf, u8 reg, u8 val)
 {
-	int ret;
-
-	mutex_lock(&pcf->lock);
-	ret = __pcf50633_write(pcf, reg, 1, &val);
-	mutex_unlock(&pcf->lock);
-
-	return ret;
+	return regmap_write(pcf->regmap, reg, val);
 }
 EXPORT_SYMBOL_GPL(pcf50633_reg_write);
 
 int pcf50633_reg_set_bit_mask(struct pcf50633 *pcf, u8 reg, u8 mask, u8 val)
 {
-	int ret;
-	u8 tmp;
-
-	val &= mask;
-
-	mutex_lock(&pcf->lock);
-	ret = __pcf50633_read(pcf, reg, 1, &tmp);
-	if (ret < 0)
-		goto out;
-
-	tmp &= ~mask;
-	tmp |= val;
-	ret = __pcf50633_write(pcf, reg, 1, &tmp);
-
-out:
-	mutex_unlock(&pcf->lock);
-
-	return ret;
+	return regmap_update_bits(pcf->regmap, reg, mask, val);
 }
 EXPORT_SYMBOL_GPL(pcf50633_reg_set_bit_mask);
 
 int pcf50633_reg_clear_bits(struct pcf50633 *pcf, u8 reg, u8 val)
 {
-	int ret;
-	u8 tmp;
-
-	mutex_lock(&pcf->lock);
-	ret = __pcf50633_read(pcf, reg, 1, &tmp);
-	if (ret < 0)
-		goto out;
-
-	tmp &= ~val;
-	ret = __pcf50633_write(pcf, reg, 1, &tmp);
-
-out:
-	mutex_unlock(&pcf->lock);
-
-	return ret;
+	return regmap_update_bits(pcf->regmap, reg, val, 0);
 }
 EXPORT_SYMBOL_GPL(pcf50633_reg_clear_bits);
 
@@ -251,6 +192,11 @@ static int pcf50633_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(pcf50633_pm, pcf50633_suspend, pcf50633_resume);
 
+static struct regmap_config pcf50633_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
 static int __devinit pcf50633_probe(struct i2c_client *client,
 				const struct i2c_device_id *ids)
 {
@@ -272,16 +218,23 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 
 	mutex_init(&pcf->lock);
 
+	pcf->regmap = regmap_init_i2c(client, &pcf50633_regmap_config);
+	if (IS_ERR(pcf->regmap)) {
+		ret = PTR_ERR(pcf->regmap);
+		dev_err(pcf->dev, "Failed to allocate register map: %d\n",
+			ret);
+		goto err_free;
+	}
+
 	i2c_set_clientdata(client, pcf);
 	pcf->dev = &client->dev;
-	pcf->i2c_client = client;
 
 	version = pcf50633_reg_read(pcf, 0);
 	variant = pcf50633_reg_read(pcf, 1);
 	if (version < 0 || variant < 0) {
 		dev_err(pcf->dev, "Unable to probe pcf50633\n");
 		ret = -ENODEV;
-		goto err_free;
+		goto err_regmap;
 	}
 
 	dev_info(pcf->dev, "Probed device version %d variant %d\n",
@@ -328,6 +281,8 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 
 	return 0;
 
+err_regmap:
+	regmap_exit(pcf->regmap);
 err_free:
 	kfree(pcf);
 
@@ -351,6 +306,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client)
 	for (i = 0; i < PCF50633_NUM_REGULATORS; i++)
 		platform_device_unregister(pcf->regulator_pdev[i]);
 
+	regmap_exit(pcf->regmap);
 	kfree(pcf);
 
 	return 0;
diff --git a/drivers/mfd/pcf50633-irq.c b/drivers/mfd/pcf50633-irq.c
index 1b0192f1eff..048a3b903b0 100644
--- a/drivers/mfd/pcf50633-irq.c
+++ b/drivers/mfd/pcf50633-irq.c
@@ -15,6 +15,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/mutex.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 
 #include <linux/mfd/pcf50633/core.h>
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index c27e515b072..de979742c6f 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -357,6 +357,7 @@ static int __devexit tc3589x_remove(struct i2c_client *client)
 	return 0;
 }
 
+#ifdef CONFIG_PM
 static int tc3589x_suspend(struct device *dev)
 {
 	struct tc3589x *tc3589x = dev_get_drvdata(dev);
@@ -387,6 +388,7 @@ static int tc3589x_resume(struct device *dev)
 
 static const SIMPLE_DEV_PM_OPS(tc3589x_dev_pm_ops, tc3589x_suspend,
 						tc3589x_resume);
+#endif
 
 static const struct i2c_device_id tc3589x_id[] = {
 	{ "tc3589x", 24 },
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
index 696879e2eef..02d65692ceb 100644
--- a/drivers/mfd/timberdale.c
+++ b/drivers/mfd/timberdale.c
@@ -697,7 +697,7 @@ static int __devinit timb_probe(struct pci_dev *dev,
 		dev_err(&dev->dev, "The driver supports an older "
 			"version of the FPGA, please update the driver to "
 			"support %d.%d\n", priv->fw.major, priv->fw.minor);
-		goto err_ioremap;
+		goto err_config;
 	}
 	if (priv->fw.major < TIMB_SUPPORTED_MAJOR ||
 		priv->fw.minor < TIMB_REQUIRED_MINOR) {
@@ -705,13 +705,13 @@ static int __devinit timb_probe(struct pci_dev *dev,
 			"please upgrade the FPGA to at least: %d.%d\n",
 			priv->fw.major, priv->fw.minor,
 			TIMB_SUPPORTED_MAJOR, TIMB_REQUIRED_MINOR);
-		goto err_ioremap;
+		goto err_config;
 	}
 
 	msix_entries = kzalloc(TIMBERDALE_NR_IRQS * sizeof(*msix_entries),
 		GFP_KERNEL);
 	if (!msix_entries)
-		goto err_ioremap;
+		goto err_config;
 
 	for (i = 0; i < TIMBERDALE_NR_IRQS; i++)
 		msix_entries[i].entry = i;
@@ -825,6 +825,8 @@ err_mfd:
 err_create_file:
 	pci_disable_msix(dev);
 err_msix:
+	kfree(msix_entries);
+err_config:
 	iounmap(priv->ctl_membase);
 err_ioremap:
 	release_mem_region(priv->ctl_mapbase, CHIPCTLSIZE);
@@ -833,7 +835,6 @@ err_request:
 err_start:
 	pci_disable_device(dev);
 err_enable:
-	kfree(msix_entries);
 	kfree(priv);
 	pci_set_drvdata(dev, NULL);
 	return -ENODEV;
diff --git a/drivers/mfd/tmio_core.c b/drivers/mfd/tmio_core.c
index eddc19ae464..83af78c1b0e 100644
--- a/drivers/mfd/tmio_core.c
+++ b/drivers/mfd/tmio_core.c
@@ -6,6 +6,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/export.h>
 #include <linux/mfd/tmio.h>
 
 int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base)
diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c
index 955bc00e4b2..5fec23a9ac0 100644
--- a/drivers/mfd/tps65912-core.c
+++ b/drivers/mfd/tps65912-core.c
@@ -131,9 +131,6 @@ int tps65912_device_init(struct tps65912 *tps65912)
 	if (init_data == NULL)
 		return -ENOMEM;
 
-	init_data->irq = pmic_plat_data->irq;
-	init_data->irq_base = pmic_plat_data->irq;
-
 	mutex_init(&tps65912->io_mutex);
 	dev_set_drvdata(tps65912->dev, tps65912);
 
@@ -153,10 +150,13 @@ int tps65912_device_init(struct tps65912 *tps65912)
 	if (ret < 0)
 		goto err;
 
+	init_data->irq = pmic_plat_data->irq;
+	init_data->irq_base = pmic_plat_data->irq;
 	ret = tps65912_irq_init(tps65912, init_data->irq, init_data);
 	if (ret < 0)
 		goto err;
 
+	kfree(init_data);
 	return ret;
 
 err:
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 01ecfeee652..bfbd66021af 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -30,6 +30,7 @@
 
 #include <linux/init.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/err.h>
@@ -109,7 +110,7 @@
 #define twl_has_watchdog()        false
 #endif
 
-#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE) ||\
+#if defined(CONFIG_MFD_TWL4030_AUDIO) || defined(CONFIG_MFD_TWL4030_AUDIO_MODULE) ||\
 	defined(CONFIG_TWL6040_CORE) || defined(CONFIG_TWL6040_CORE_MODULE)
 #define twl_has_codec()	true
 #else
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index 8a7ee3139b8..f062c8cc6c3 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -30,7 +30,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/kthread.h>
 #include <linux/slab.h>
 
 #include <linux/i2c/twl.h>
@@ -278,59 +277,6 @@ static const struct sih sih_modules_twl5031[8] = {
 
 static unsigned twl4030_irq_base;
 
-static struct completion irq_event;
-
-/*
- * This thread processes interrupts reported by the Primary Interrupt Handler.
- */
-static int twl4030_irq_thread(void *data)
-{
-	long irq = (long)data;
-	static unsigned i2c_errors;
-	static const unsigned max_i2c_errors = 100;
-
-
-	current->flags |= PF_NOFREEZE;
-
-	while (!kthread_should_stop()) {
-		int ret;
-		int module_irq;
-		u8 pih_isr;
-
-		/* Wait for IRQ, then read PIH irq status (also blocking) */
-		wait_for_completion_interruptible(&irq_event);
-
-		ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
-					  REG_PIH_ISR_P1);
-		if (ret) {
-			pr_warning("twl4030: I2C error %d reading PIH ISR\n",
-					ret);
-			if (++i2c_errors >= max_i2c_errors) {
-				printk(KERN_ERR "Maximum I2C error count"
-						" exceeded.  Terminating %s.\n",
-						__func__);
-				break;
-			}
-			complete(&irq_event);
-			continue;
-		}
-
-		/* these handlers deal with the relevant SIH irq status */
-		local_irq_disable();
-		for (module_irq = twl4030_irq_base;
-				pih_isr;
-				pih_isr >>= 1, module_irq++) {
-			if (pih_isr & 0x1)
-				generic_handle_irq(module_irq);
-		}
-		local_irq_enable();
-
-		enable_irq(irq);
-	}
-
-	return 0;
-}
-
 /*
  * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt.
  * This is a chained interrupt, so there is no desc->action method for it.
@@ -342,9 +288,25 @@ static int twl4030_irq_thread(void *data)
  */
 static irqreturn_t handle_twl4030_pih(int irq, void *devid)
 {
-	/* Acknowledge, clear *AND* mask the interrupt... */
-	disable_irq_nosync(irq);
-	complete(devid);
+	int		module_irq;
+	irqreturn_t	ret;
+	u8		pih_isr;
+
+	ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
+			REG_PIH_ISR_P1);
+	if (ret) {
+		pr_warning("twl4030: I2C error %d reading PIH ISR\n", ret);
+		return IRQ_NONE;
+	}
+
+	/* these handlers deal with the relevant SIH irq status */
+	for (module_irq = twl4030_irq_base;
+			pih_isr;
+			pih_isr >>= 1, module_irq++) {
+		if (pih_isr & 0x1)
+			handle_nested_irq(module_irq);
+	}
+
 	return IRQ_HANDLED;
 }
 /*----------------------------------------------------------------------*/
@@ -460,113 +422,17 @@ static inline void activate_irq(int irq)
 
 /*----------------------------------------------------------------------*/
 
-static DEFINE_SPINLOCK(sih_agent_lock);
-
-static struct workqueue_struct *wq;
-
 struct sih_agent {
 	int			irq_base;
 	const struct sih	*sih;
 
 	u32			imr;
 	bool			imr_change_pending;
-	struct work_struct	mask_work;
-
-	u32			edge_change;
-	struct work_struct	edge_work;
-};
-
-static void twl4030_sih_do_mask(struct work_struct *work)
-{
-	struct sih_agent	*agent;
-	const struct sih	*sih;
-	union {
-		u8	bytes[4];
-		u32	word;
-	}			imr;
-	int			status;
 
-	agent = container_of(work, struct sih_agent, mask_work);
-
-	/* see what work we have */
-	spin_lock_irq(&sih_agent_lock);
-	if (agent->imr_change_pending) {
-		sih = agent->sih;
-		/* byte[0] gets overwritten as we write ... */
-		imr.word = cpu_to_le32(agent->imr << 8);
-		agent->imr_change_pending = false;
-	} else
-		sih = NULL;
-	spin_unlock_irq(&sih_agent_lock);
-	if (!sih)
-		return;
-
-	/* write the whole mask ... simpler than subsetting it */
-	status = twl_i2c_write(sih->module, imr.bytes,
-			sih->mask[irq_line].imr_offset, sih->bytes_ixr);
-	if (status)
-		pr_err("twl4030: %s, %s --> %d\n", __func__,
-				"write", status);
-}
-
-static void twl4030_sih_do_edge(struct work_struct *work)
-{
-	struct sih_agent	*agent;
-	const struct sih	*sih;
-	u8			bytes[6];
 	u32			edge_change;
-	int			status;
-
-	agent = container_of(work, struct sih_agent, edge_work);
-
-	/* see what work we have */
-	spin_lock_irq(&sih_agent_lock);
-	edge_change = agent->edge_change;
-	agent->edge_change = 0;
-	sih = edge_change ? agent->sih : NULL;
-	spin_unlock_irq(&sih_agent_lock);
-	if (!sih)
-		return;
-
-	/* Read, reserving first byte for write scratch.  Yes, this
-	 * could be cached for some speedup ... but be careful about
-	 * any processor on the other IRQ line, EDR registers are
-	 * shared.
-	 */
-	status = twl_i2c_read(sih->module, bytes + 1,
-			sih->edr_offset, sih->bytes_edr);
-	if (status) {
-		pr_err("twl4030: %s, %s --> %d\n", __func__,
-				"read", status);
-		return;
-	}
-
-	/* Modify only the bits we know must change */
-	while (edge_change) {
-		int		i = fls(edge_change) - 1;
-		struct irq_data	*idata = irq_get_irq_data(i + agent->irq_base);
-		int		byte = 1 + (i >> 2);
-		int		off = (i & 0x3) * 2;
-		unsigned int	type;
-
-		bytes[byte] &= ~(0x03 << off);
 
-		type = irqd_get_trigger_type(idata);
-		if (type & IRQ_TYPE_EDGE_RISING)
-			bytes[byte] |= BIT(off + 1);
-		if (type & IRQ_TYPE_EDGE_FALLING)
-			bytes[byte] |= BIT(off + 0);
-
-		edge_change &= ~BIT(i);
-	}
-
-	/* Write */
-	status = twl_i2c_write(sih->module, bytes,
-			sih->edr_offset, sih->bytes_edr);
-	if (status)
-		pr_err("twl4030: %s, %s --> %d\n", __func__,
-				"write", status);
-}
+	struct mutex		irq_lock;
+};
 
 /*----------------------------------------------------------------------*/
 
@@ -579,50 +445,125 @@ static void twl4030_sih_do_edge(struct work_struct *work)
 
 static void twl4030_sih_mask(struct irq_data *data)
 {
-	struct sih_agent *sih = irq_data_get_irq_chip_data(data);
-	unsigned long flags;
-
-	spin_lock_irqsave(&sih_agent_lock, flags);
-	sih->imr |= BIT(data->irq - sih->irq_base);
-	sih->imr_change_pending = true;
-	queue_work(wq, &sih->mask_work);
-	spin_unlock_irqrestore(&sih_agent_lock, flags);
+	struct sih_agent *agent = irq_data_get_irq_chip_data(data);
+
+	agent->imr |= BIT(data->irq - agent->irq_base);
+	agent->imr_change_pending = true;
 }
 
 static void twl4030_sih_unmask(struct irq_data *data)
 {
-	struct sih_agent *sih = irq_data_get_irq_chip_data(data);
-	unsigned long flags;
-
-	spin_lock_irqsave(&sih_agent_lock, flags);
-	sih->imr &= ~BIT(data->irq - sih->irq_base);
-	sih->imr_change_pending = true;
-	queue_work(wq, &sih->mask_work);
-	spin_unlock_irqrestore(&sih_agent_lock, flags);
+	struct sih_agent *agent = irq_data_get_irq_chip_data(data);
+
+	agent->imr &= ~BIT(data->irq - agent->irq_base);
+	agent->imr_change_pending = true;
 }
 
 static int twl4030_sih_set_type(struct irq_data *data, unsigned trigger)
 {
-	struct sih_agent *sih = irq_data_get_irq_chip_data(data);
-	unsigned long flags;
+	struct sih_agent *agent = irq_data_get_irq_chip_data(data);
 
 	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
 		return -EINVAL;
 
-	spin_lock_irqsave(&sih_agent_lock, flags);
-	if (irqd_get_trigger_type(data) != trigger) {
-		sih->edge_change |= BIT(data->irq - sih->irq_base);
-		queue_work(wq, &sih->edge_work);
-	}
-	spin_unlock_irqrestore(&sih_agent_lock, flags);
+	if (irqd_get_trigger_type(data) != trigger)
+		agent->edge_change |= BIT(data->irq - agent->irq_base);
+
 	return 0;
 }
 
+static void twl4030_sih_bus_lock(struct irq_data *data)
+{
+	struct sih_agent	*agent = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&agent->irq_lock);
+}
+
+static void twl4030_sih_bus_sync_unlock(struct irq_data *data)
+{
+	struct sih_agent	*agent = irq_data_get_irq_chip_data(data);
+	const struct sih	*sih = agent->sih;
+	int			status;
+
+	if (agent->imr_change_pending) {
+		union {
+			u32	word;
+			u8	bytes[4];
+		} imr;
+
+		/* byte[0] gets overwriten as we write ... */
+		imr.word = cpu_to_le32(agent->imr << 8);
+		agent->imr_change_pending = false;
+
+		/* write the whole mask ... simpler than subsetting it */
+		status = twl_i2c_write(sih->module, imr.bytes,
+				sih->mask[irq_line].imr_offset,
+				sih->bytes_ixr);
+		if (status)
+			pr_err("twl4030: %s, %s --> %d\n", __func__,
+					"write", status);
+	}
+
+	if (agent->edge_change) {
+		u32		edge_change;
+		u8		bytes[6];
+
+		edge_change = agent->edge_change;
+		agent->edge_change = 0;
+
+		/*
+		 * Read, reserving first byte for write scratch.  Yes, this
+		 * could be cached for some speedup ... but be careful about
+		 * any processor on the other IRQ line, EDR registers are
+		 * shared.
+		 */
+		status = twl_i2c_read(sih->module, bytes + 1,
+				sih->edr_offset, sih->bytes_edr);
+		if (status) {
+			pr_err("twl4030: %s, %s --> %d\n", __func__,
+					"read", status);
+			return;
+		}
+
+		/* Modify only the bits we know must change */
+		while (edge_change) {
+			int		i = fls(edge_change) - 1;
+			struct irq_data	*idata;
+			int		byte = 1 + (i >> 2);
+			int		off = (i & 0x3) * 2;
+			unsigned int	type;
+
+			idata = irq_get_irq_data(i + agent->irq_base);
+
+			bytes[byte] &= ~(0x03 << off);
+
+			type = irqd_get_trigger_type(idata);
+			if (type & IRQ_TYPE_EDGE_RISING)
+				bytes[byte] |= BIT(off + 1);
+			if (type & IRQ_TYPE_EDGE_FALLING)
+				bytes[byte] |= BIT(off + 0);
+
+			edge_change &= ~BIT(i);
+		}
+
+		/* Write */
+		status = twl_i2c_write(sih->module, bytes,
+				sih->edr_offset, sih->bytes_edr);
+		if (status)
+			pr_err("twl4030: %s, %s --> %d\n", __func__,
+					"write", status);
+	}
+
+	mutex_unlock(&agent->irq_lock);
+}
+
 static struct irq_chip twl4030_sih_irq_chip = {
 	.name		= "twl4030",
-	.irq_mask      	= twl4030_sih_mask,
+	.irq_mask	= twl4030_sih_mask,
 	.irq_unmask	= twl4030_sih_unmask,
 	.irq_set_type	= twl4030_sih_set_type,
+	.irq_bus_lock	= twl4030_sih_bus_lock,
+	.irq_bus_sync_unlock = twl4030_sih_bus_sync_unlock,
 };
 
 /*----------------------------------------------------------------------*/
@@ -655,9 +596,7 @@ static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc)
 	int isr;
 
 	/* reading ISR acks the IRQs, using clear-on-read mode */
-	local_irq_enable();
 	isr = sih_read_isr(sih);
-	local_irq_disable();
 
 	if (isr < 0) {
 		pr_err("twl4030: %s SIH, read ISR error %d\n",
@@ -672,7 +611,7 @@ static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc)
 		isr &= ~BIT(irq);
 
 		if (irq < sih->bits)
-			generic_handle_irq(agent->irq_base + irq);
+			handle_nested_irq(agent->irq_base + irq);
 		else
 			pr_err("twl4030: %s SIH, invalid ISR bit %d\n",
 				sih->name, irq);
@@ -718,15 +657,14 @@ int twl4030_sih_setup(int module)
 	agent->irq_base = irq_base;
 	agent->sih = sih;
 	agent->imr = ~0;
-	INIT_WORK(&agent->mask_work, twl4030_sih_do_mask);
-	INIT_WORK(&agent->edge_work, twl4030_sih_do_edge);
+	mutex_init(&agent->irq_lock);
 
 	for (i = 0; i < sih->bits; i++) {
 		irq = irq_base + i;
 
+		irq_set_chip_data(irq, agent);
 		irq_set_chip_and_handler(irq, &twl4030_sih_irq_chip,
 					 handle_edge_irq);
-		irq_set_chip_data(irq, agent);
 		activate_irq(irq);
 	}
 
@@ -758,7 +696,6 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
 
 	int			status;
 	int			i;
-	struct task_struct	*task;
 
 	/*
 	 * Mask and clear all TWL4030 interrupts since initially we do
@@ -768,12 +705,6 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
 	if (status < 0)
 		return status;
 
-	wq = create_singlethread_workqueue("twl4030-irqchip");
-	if (!wq) {
-		pr_err("twl4030: workqueue FAIL\n");
-		return -ESRCH;
-	}
-
 	twl4030_irq_base = irq_base;
 
 	/* install an irq handler for each of the SIH modules;
@@ -787,6 +718,7 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
 	for (i = irq_base; i < irq_end; i++) {
 		irq_set_chip_and_handler(i, &twl4030_irq_chip,
 					 handle_simple_irq);
+		irq_set_nested_thread(i, 1);
 		activate_irq(i);
 	}
 	twl4030_irq_next = i;
@@ -801,34 +733,22 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
 	}
 
 	/* install an irq handler to demultiplex the TWL4030 interrupt */
-
-
-	init_completion(&irq_event);
-
-	status = request_irq(irq_num, handle_twl4030_pih, IRQF_DISABLED,
-				"TWL4030-PIH", &irq_event);
+	status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih, 0,
+					"TWL4030-PIH", NULL);
 	if (status < 0) {
 		pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status);
 		goto fail_rqirq;
 	}
 
-	task = kthread_run(twl4030_irq_thread, (void *)(long)irq_num,
-								"twl4030-irq");
-	if (IS_ERR(task)) {
-		pr_err("twl4030: could not create irq %d thread!\n", irq_num);
-		status = PTR_ERR(task);
-		goto fail_kthread;
-	}
 	return status;
-fail_kthread:
-	free_irq(irq_num, &irq_event);
 fail_rqirq:
 	/* clean up twl4030_sih_setup */
 fail:
-	for (i = irq_base; i < irq_end; i++)
+	for (i = irq_base; i < irq_end; i++) {
+		irq_set_nested_thread(i, 0);
 		irq_set_chip_and_handler(i, NULL, NULL);
-	destroy_workqueue(wq);
-	wq = NULL;
+	}
+
 	return status;
 }
 
diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
index 7cbf2aa9e64..834f824d3c1 100644
--- a/drivers/mfd/twl4030-madc.c
+++ b/drivers/mfd/twl4030-madc.c
@@ -740,6 +740,28 @@ static int __devinit twl4030_madc_probe(struct platform_device *pdev)
 			TWL4030_BCI_BCICTL1);
 		goto err_i2c;
 	}
+
+	/* Check that MADC clock is on */
+	ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &regval, TWL4030_REG_GPBR1);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to read reg GPBR1 0x%X\n",
+				TWL4030_REG_GPBR1);
+		goto err_i2c;
+	}
+
+	/* If MADC clk is not on, turn it on */
+	if (!(regval & TWL4030_GPBR1_MADC_HFCLK_EN)) {
+		dev_info(&pdev->dev, "clk disabled, enabling\n");
+		regval |= TWL4030_GPBR1_MADC_HFCLK_EN;
+		ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, regval,
+				       TWL4030_REG_GPBR1);
+		if (ret) {
+			dev_err(&pdev->dev, "unable to write reg GPBR1 0x%X\n",
+					TWL4030_REG_GPBR1);
+			goto err_i2c;
+		}
+	}
+
 	platform_set_drvdata(pdev, madc);
 	mutex_init(&madc->lock);
 	ret = request_threaded_irq(platform_get_irq(pdev, 0), NULL,
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
index eb3b5f88e56..3eee45ffb09 100644
--- a/drivers/mfd/twl6030-irq.c
+++ b/drivers/mfd/twl6030-irq.c
@@ -32,11 +32,13 @@
  */
 
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/kthread.h>
 #include <linux/i2c/twl.h>
 #include <linux/platform_device.h>
+#include <linux/suspend.h>
 
 #include "twl-core.h"
 
@@ -83,8 +85,48 @@ static int twl6030_interrupt_mapping[24] = {
 /*----------------------------------------------------------------------*/
 
 static unsigned twl6030_irq_base;
+static int twl_irq;
+static bool twl_irq_wake_enabled;
 
 static struct completion irq_event;
+static atomic_t twl6030_wakeirqs = ATOMIC_INIT(0);
+
+static int twl6030_irq_pm_notifier(struct notifier_block *notifier,
+				   unsigned long pm_event, void *unused)
+{
+	int chained_wakeups;
+
+	switch (pm_event) {
+	case PM_SUSPEND_PREPARE:
+		chained_wakeups = atomic_read(&twl6030_wakeirqs);
+
+		if (chained_wakeups && !twl_irq_wake_enabled) {
+			if (enable_irq_wake(twl_irq))
+				pr_err("twl6030 IRQ wake enable failed\n");
+			else
+				twl_irq_wake_enabled = true;
+		} else if (!chained_wakeups && twl_irq_wake_enabled) {
+			disable_irq_wake(twl_irq);
+			twl_irq_wake_enabled = false;
+		}
+
+		disable_irq(twl_irq);
+		break;
+
+	case PM_POST_SUSPEND:
+		enable_irq(twl_irq);
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block twl6030_irq_pm_notifier_block = {
+	.notifier_call = twl6030_irq_pm_notifier,
+};
 
 /*
  * This thread processes interrupts reported by the Primary Interrupt Handler.
@@ -187,6 +229,16 @@ static inline void activate_irq(int irq)
 #endif
 }
 
+int twl6030_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+	if (on)
+		atomic_inc(&twl6030_wakeirqs);
+	else
+		atomic_dec(&twl6030_wakeirqs);
+
+	return 0;
+}
+
 /*----------------------------------------------------------------------*/
 
 static unsigned twl6030_irq_next;
@@ -318,10 +370,12 @@ int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
 	twl6030_irq_chip = dummy_irq_chip;
 	twl6030_irq_chip.name = "twl6030";
 	twl6030_irq_chip.irq_set_type = NULL;
+	twl6030_irq_chip.irq_set_wake = twl6030_irq_set_wake;
 
 	for (i = irq_base; i < irq_end; i++) {
 		irq_set_chip_and_handler(i, &twl6030_irq_chip,
 					 handle_simple_irq);
+		irq_set_chip_data(i, (void *)irq_num);
 		activate_irq(i);
 	}
 
@@ -331,6 +385,14 @@ int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
 
 	/* install an irq handler to demultiplex the TWL6030 interrupt */
 	init_completion(&irq_event);
+
+	status = request_irq(irq_num, handle_twl6030_pih, 0,
+				"TWL6030-PIH", &irq_event);
+	if (status < 0) {
+		pr_err("twl6030: could not claim irq%d: %d\n", irq_num, status);
+		goto fail_irq;
+	}
+
 	task = kthread_run(twl6030_irq_thread, (void *)irq_num, "twl6030-irq");
 	if (IS_ERR(task)) {
 		pr_err("twl6030: could not create irq %d thread!\n", irq_num);
@@ -338,17 +400,14 @@ int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
 		goto fail_kthread;
 	}
 
-	status = request_irq(irq_num, handle_twl6030_pih, IRQF_DISABLED,
-				"TWL6030-PIH", &irq_event);
-	if (status < 0) {
-		pr_err("twl6030: could not claim irq%d: %d\n", irq_num, status);
-		goto fail_irq;
-	}
+	twl_irq = irq_num;
+	register_pm_notifier(&twl6030_irq_pm_notifier_block);
 	return status;
-fail_irq:
-	free_irq(irq_num, &irq_event);
 
 fail_kthread:
+	free_irq(irq_num, &irq_event);
+
+fail_irq:
 	for (i = irq_base; i < irq_end; i++)
 		irq_set_chip_and_handler(i, NULL, NULL);
 	return status;
@@ -356,6 +415,7 @@ fail_kthread:
 
 int twl6030_exit_irq(void)
 {
+	unregister_pm_notifier(&twl6030_irq_pm_notifier_block);
 
 	if (twl6030_irq_base) {
 		pr_err("twl6030: can't yet clean up IRQs?\n");
diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index 24d436c2fe4..268f80fd043 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -34,7 +34,7 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/twl6040.h>
 
-static struct platform_device *twl6040_dev;
+#define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
 
 int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
 {
@@ -42,10 +42,16 @@ int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
 	u8 val = 0;
 
 	mutex_lock(&twl6040->io_mutex);
-	ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg);
-	if (ret < 0) {
-		mutex_unlock(&twl6040->io_mutex);
-		return ret;
+	/* Vibra control registers from cache */
+	if (unlikely(reg == TWL6040_REG_VIBCTLL ||
+		     reg == TWL6040_REG_VIBCTLR)) {
+		val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)];
+	} else {
+		ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg);
+		if (ret < 0) {
+			mutex_unlock(&twl6040->io_mutex);
+			return ret;
+		}
 	}
 	mutex_unlock(&twl6040->io_mutex);
 
@@ -59,6 +65,9 @@ int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val)
 
 	mutex_lock(&twl6040->io_mutex);
 	ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg);
+	/* Cache the vibra control registers */
+	if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR)
+		twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val;
 	mutex_unlock(&twl6040->io_mutex);
 
 	return ret;
@@ -203,11 +212,11 @@ static irqreturn_t twl6040_naudint_handler(int irq, void *data)
 	if (intid & TWL6040_THINT) {
 		status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
 		if (status & TWL6040_TSHUTDET) {
-			dev_warn(&twl6040_dev->dev,
+			dev_warn(twl6040->dev,
 				 "Thermal shutdown, powering-off");
 			twl6040_power(twl6040, 0);
 		} else {
-			dev_warn(&twl6040_dev->dev,
+			dev_warn(twl6040->dev,
 				 "Leaving thermal shutdown, powering-on");
 			twl6040_power(twl6040, 1);
 		}
@@ -227,7 +236,7 @@ static int twl6040_power_up_completion(struct twl6040 *twl6040,
 	if (!time_left) {
 		intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
 		if (!(intid & TWL6040_READYINT)) {
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"timeout waiting for READYINT\n");
 			return -ETIMEDOUT;
 		}
@@ -255,7 +264,7 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 			/* wait for power-up completion */
 			ret = twl6040_power_up_completion(twl6040, naudint);
 			if (ret) {
-				dev_err(&twl6040_dev->dev,
+				dev_err(twl6040->dev,
 					"automatic power-down failed\n");
 				twl6040->power_count = 0;
 				goto out;
@@ -264,7 +273,7 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 			/* use manual power-up sequence */
 			ret = twl6040_power_up(twl6040);
 			if (ret) {
-				dev_err(&twl6040_dev->dev,
+				dev_err(twl6040->dev,
 					"manual power-up failed\n");
 				twl6040->power_count = 0;
 				goto out;
@@ -276,7 +285,7 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 	} else {
 		/* already powered-down */
 		if (!twl6040->power_count) {
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"device is already powered-off\n");
 			ret = -EPERM;
 			goto out;
@@ -326,7 +335,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 			lppllctl &= ~TWL6040_LPLLFIN;
 			break;
 		default:
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"freq_out %d not supported\n", freq_out);
 			ret = -EINVAL;
 			goto pll_out;
@@ -347,7 +356,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 					  hppllctl);
 			break;
 		default:
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"freq_in %d not supported\n", freq_in);
 			ret = -EINVAL;
 			goto pll_out;
@@ -356,7 +365,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 	case TWL6040_SYSCLK_SEL_HPPLL:
 		/* high-performance PLL can provide only 19.2 MHz */
 		if (freq_out != 19200000) {
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"freq_out %d not supported\n", freq_out);
 			ret = -EINVAL;
 			goto pll_out;
@@ -389,7 +398,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 				    TWL6040_HPLLENA;
 			break;
 		default:
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"freq_in %d not supported\n", freq_in);
 			ret = -EINVAL;
 			goto pll_out;
@@ -406,7 +415,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 		twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
 		break;
 	default:
-		dev_err(&twl6040_dev->dev, "unknown pll id %d\n", pll_id);
+		dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
 		ret = -EINVAL;
 		goto pll_out;
 	}
@@ -435,6 +444,18 @@ unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
 }
 EXPORT_SYMBOL(twl6040_get_sysclk);
 
+/* Get the combined status of the vibra control register */
+int twl6040_get_vibralr_status(struct twl6040 *twl6040)
+{
+	u8 status;
+
+	status = twl6040->vibra_ctrl_cache[0] | twl6040->vibra_ctrl_cache[1];
+	status &= (TWL6040_VIBENA | TWL6040_VIBSEL);
+
+	return status;
+}
+EXPORT_SYMBOL(twl6040_get_vibralr_status);
+
 static struct resource twl6040_vibra_rsrc[] = {
 	{
 		.flags = IORESOURCE_IRQ,
@@ -471,9 +492,7 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, twl6040);
 
-	twl6040_dev = pdev;
 	twl6040->dev = &pdev->dev;
-	twl6040->audpwron = pdata->audpwron_gpio;
 	twl6040->irq = pdata->naudint_irq;
 	twl6040->irq_base = pdata->irq_base;
 
@@ -483,6 +502,12 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 
 	twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
 
+	/* ERRATA: Automatic power-up is not possible in ES1.0 */
+	if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
+		twl6040->audpwron = pdata->audpwron_gpio;
+	else
+		twl6040->audpwron = -EINVAL;
+
 	if (gpio_is_valid(twl6040->audpwron)) {
 		ret = gpio_request(twl6040->audpwron, "audpwron");
 		if (ret)
@@ -493,10 +518,6 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 			goto gpio2_err;
 	}
 
-	/* ERRATA: Automatic power-up is not possible in ES1.0 */
-	if (twl6040->rev == TWL6040_REV_ES1_0)
-		twl6040->audpwron = -EINVAL;
-
 	/* codec interrupt */
 	ret = twl6040_irq_init(twl6040);
 	if (ret)
@@ -566,7 +587,6 @@ gpio2_err:
 gpio1_err:
 	platform_set_drvdata(pdev, NULL);
 	kfree(twl6040);
-	twl6040_dev = NULL;
 	return ret;
 }
 
@@ -586,7 +606,6 @@ static int __devexit twl6040_remove(struct platform_device *pdev)
 	mfd_remove_devices(&pdev->dev);
 	platform_set_drvdata(pdev, NULL);
 	kfree(twl6040);
-	twl6040_dev = NULL;
 
 	return 0;
 }
diff --git a/drivers/mfd/wl1273-core.c b/drivers/mfd/wl1273-core.c
index d97a8694517..f39b756df56 100644
--- a/drivers/mfd/wl1273-core.c
+++ b/drivers/mfd/wl1273-core.c
@@ -22,6 +22,7 @@
 
 #include <linux/mfd/wl1273-core.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DRIVER_DESC "WL1273 FM Radio Core"
 
diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
index ada1835a545..f4747a4a9a9 100644
--- a/drivers/mfd/wm831x-irq.c
+++ b/drivers/mfd/wm831x-irq.c
@@ -420,12 +420,19 @@ static int wm831x_irq_set_type(struct irq_data *data, unsigned int type)
 	switch (type) {
 	case IRQ_TYPE_EDGE_BOTH:
 		wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_INT_MODE;
+		wm831x->gpio_level[irq] = false;
 		break;
 	case IRQ_TYPE_EDGE_RISING:
 		wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_POL;
+		wm831x->gpio_level[irq] = false;
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
 		wm831x->gpio_update[irq] = 0x10000;
+		wm831x->gpio_level[irq] = false;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_POL;
+		wm831x->gpio_level[irq] = true;
 		break;
 	default:
 		return -EINVAL;
@@ -449,7 +456,7 @@ static irqreturn_t wm831x_irq_thread(int irq, void *data)
 {
 	struct wm831x *wm831x = data;
 	unsigned int i;
-	int primary, status_addr;
+	int primary, status_addr, ret;
 	int status_regs[WM831X_NUM_IRQ_REGS] = { 0 };
 	int read[WM831X_NUM_IRQ_REGS] = { 0 };
 	int *status;
@@ -507,6 +514,19 @@ static irqreturn_t wm831x_irq_thread(int irq, void *data)
 
 		if (*status & wm831x_irqs[i].mask)
 			handle_nested_irq(wm831x->irq_base + i);
+
+		/* Simulate an edge triggered IRQ by polling the input
+		 * status.  This is sucky but improves interoperability.
+		 */
+		if (primary == WM831X_GP_INT &&
+		    wm831x->gpio_level[i - WM831X_IRQ_GPIO_1]) {
+			ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL);
+			while (ret & 1 << (i - WM831X_IRQ_GPIO_1)) {
+				handle_nested_irq(wm831x->irq_base + i);
+				ret = wm831x_reg_read(wm831x,
+						      WM831X_GPIO_LEVEL);
+			}
+		}
 	}
 
 out:
@@ -596,8 +616,6 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq)
 			 "No interrupt specified - functionality limited\n");
 	}
 
-
-
 	/* Enable top level interrupts, we mask at secondary level */
 	wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);
 
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index e06ba9440cd..62b4626f456 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -12,6 +12,7 @@
  *
  */
 
+#include <linux/module.h>
 #include <linux/bug.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index bfde4e8ec63..5d6ba132837 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -167,6 +167,18 @@ static struct mfd_cell wm8994_devs[] = {
  * and should be handled via the standard regulator API supply
  * management.
  */
+static const char *wm1811_main_supplies[] = {
+	"DBVDD1",
+	"DBVDD2",
+	"DBVDD3",
+	"DCVDD",
+	"AVDD1",
+	"AVDD2",
+	"CPVDD",
+	"SPKVDD1",
+	"SPKVDD2",
+};
+
 static const char *wm8994_main_supplies[] = {
 	"DBVDD",
 	"DCVDD",
@@ -205,6 +217,47 @@ static int wm8994_suspend(struct device *dev)
 		return 0;
 	}
 
+	ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_4);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read power status: %d\n", ret);
+	} else if (ret & (WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA |
+			  WM8994_AIF1ADC2L_ENA | WM8994_AIF1ADC2R_ENA |
+			  WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC1R_ENA)) {
+		dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+		return 0;
+	}
+
+	ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_5);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read power status: %d\n", ret);
+	} else if (ret & (WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA |
+			  WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA |
+			  WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA)) {
+		dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+		return 0;
+	}
+
+	switch (wm8994->type) {
+	case WM8958:
+		ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1);
+		if (ret < 0) {
+			dev_err(dev, "Failed to read power status: %d\n", ret);
+		} else if (ret & WM8958_MICD_ENA) {
+			dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+			return 0;
+		}
+		break;
+	default:
+		break;
+	}
+
+	/* Disable LDO pulldowns while the device is suspended if we
+	 * don't know that something will be driving them. */
+	if (!wm8994->ldo_ena_always_driven)
+		wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
+				WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
+				WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD);
+
 	/* GPIO configuration state is saved here since we may be configuring
 	 * the GPIO alternate functions even if we're not using the gpiolib
 	 * driver for them.
@@ -274,6 +327,11 @@ static int wm8994_resume(struct device *dev)
 	if (ret < 0)
 		dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
 
+	/* Disable LDO pulldowns while the device is active */
+	wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
+			WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
+			0);
+
 	wm8994->suspended = false;
 
 	return 0;
@@ -329,6 +387,9 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 	}
 
 	switch (wm8994->type) {
+	case WM1811:
+		wm8994->num_supplies = ARRAY_SIZE(wm1811_main_supplies);
+		break;
 	case WM8994:
 		wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies);
 		break;
@@ -349,6 +410,10 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 	}
 
 	switch (wm8994->type) {
+	case WM1811:
+		for (i = 0; i < ARRAY_SIZE(wm1811_main_supplies); i++)
+			wm8994->supplies[i].supply = wm1811_main_supplies[i];
+		break;
 	case WM8994:
 		for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++)
 			wm8994->supplies[i].supply = wm8994_main_supplies[i];
@@ -382,6 +447,13 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 		goto err_enable;
 	}
 	switch (ret) {
+	case 0x1811:
+		devname = "WM1811";
+		if (wm8994->type != WM1811)
+			dev_warn(wm8994->dev, "Device registered as type %d\n",
+				 wm8994->type);
+		wm8994->type = WM1811;
+		break;
 	case 0x8994:
 		devname = "WM8994";
 		if (wm8994->type != WM8994)
@@ -441,8 +513,15 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 						pdata->gpio_defaults[i]);
 			}
 		}
+
+		wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
 	}
 
+	/* Disable LDO pulldowns while the device is active */
+	wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
+			WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
+			0);
+
 	/* In some system designs where the regulators are not in use,
 	 * we can achieve a small reduction in leakage currents by
 	 * floating LDO outputs.  This bit makes no difference if the
@@ -539,6 +618,7 @@ static int wm8994_i2c_remove(struct i2c_client *i2c)
 }
 
 static const struct i2c_device_id wm8994_i2c_id[] = {
+	{ "wm1811", WM1811 },
 	{ "wm8994", WM8994 },
 	{ "wm8958", WM8958 },
 	{ }