Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull first batch of arm-soc cleanups from Olof Johansson:
 "These cleanups are basically all over the place.  The idea is to
  collect changes with minimal impact but large number of changes so we
  can avoid them from distracting in the diffstat in the other series.

  A significant number of lines get removed here, in particular because
  the ixp2000 and ixp23xx platforms get removed.  These have never been
  extremely popular and have fallen into disuse over time with no active
  maintainer taking care of them.  The u5500 soc never made it into a
  product, so we are removing it from the ux500 platform.

  Many good cleanups also went into the at91 and omap platforms, as has
  been the case for a number of releases."

Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx}

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits)
  ARM: clps711x: Cleanup IRQ handling
  ARM clps711x: Removed unused header mach/time.h
  ARM: clps711x: Added note about support EP731x CPU to Kconfig
  ARM: clps711x: Added missing register definitions
  ARM: clps711x: Used own subarch directory for store header file
  Dove: Fix Section mismatch warnings
  ARM: orion5x: ts78xx debugging changes
  ARM: orion5x: remove PM dependency from ts78xx
  ARM: orion5x: ts78xx fix NAND resource off by one
  ARM: orion5x: ts78xx whitespace cleanups
  Orion5x: Fix Section mismatch warnings
  Orion5x: Fix warning: struct pci_dev declared inside paramter list
  ARM: clps711x: Combine header files into one for clps711x-targets
  ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c
  ARM: S3C24XX: Use common macro to define resources on mach-osiris.c
  ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable
  ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c
  ARM: S5PV210: Use common macro to define resources on dev-audio.c
  ARM: S5PC100: Use common macro to define resources on dev-audio.c
  ARM: S5P64X0: Use common macro to define resources on dev-audio.c
  ...

6 files changed, 0 insertions, 2749 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index b5a0032f616..49ef8b0794a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -652,23 +652,6 @@ config EZX_PCAP
 	  This enables the PCAP ASIC present on EZX Phones. This is
 	  needed for MMC, TouchScreen, Sound, USB, etc..
 
-config AB5500_CORE
-	bool "ST-Ericsson AB5500 Mixed Signal Power Management chip"
-	depends on ABX500_CORE && MFD_DB5500_PRCMU
-	select MFD_CORE
-	help
-	  Select this option to enable access to AB5500 power management
-	  chip. This connects to the db5500 chip via the I2C bus via PRCMU.
-	  This chip embeds various other multimedia funtionalities as well.
-
-config AB5500_DEBUG
-	bool "Enable debug info via debugfs"
-	depends on AB5500_CORE && DEBUG_FS
-	default y if DEBUG_FS
-	help
-	  Select this option if you want debug information from the AB5500
-	  using the debug filesystem, debugfs.
-
 config AB8500_CORE
 	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
 	depends on GENERIC_HARDIRQS && ABX500_CORE
@@ -715,16 +698,6 @@ config MFD_DB8500_PRCMU
 	  system controller running an XP70 microprocessor, which is accessed
 	  through a register map.
 
-config MFD_DB5500_PRCMU
-	bool "ST-Ericsson DB5500 Power Reset Control Management Unit"
-	depends on UX500_SOC_DB5500
-	select MFD_CORE
-	help
-	  Select this option to enable support for the DB5500 Power Reset
-	  and Control Management Unit. This is basically an autonomous
-	  system controller running an XP70 microprocessor, which is accessed
-	  through a register map.
-
 config MFD_CS5535
 	tristate "Support for CS5535 and CS5536 southbridge core functions"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 77293e15023..43672b87805 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -87,15 +87,12 @@ obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
 obj-$(CONFIG_ABX500_CORE)	+= abx500-core.o
 obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
-obj-$(CONFIG_AB5500_CORE)	+= ab5500-core.o
-obj-$(CONFIG_AB5500_DEBUG)	+= ab5500-debugfs.o
 obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-sysctrl.o
 obj-$(CONFIG_AB8500_DEBUG)	+= ab8500-debugfs.o
 obj-$(CONFIG_AB8500_GPADC)	+= ab8500-gpadc.o
 obj-$(CONFIG_MFD_DB8500_PRCMU)	+= db8500-prcmu.o
 # ab8500-i2c need to come after db8500-prcmu (which provides the channel)
 obj-$(CONFIG_AB8500_I2C_CORE)	+= ab8500-i2c.o
-obj-$(CONFIG_MFD_DB5500_PRCMU)	+= db5500-prcmu.o
 obj-$(CONFIG_MFD_TIMBERDALE)    += timberdale.o
 obj-$(CONFIG_PMIC_ADP5520)	+= adp5520.o
 obj-$(CONFIG_LPC_SCH)		+= lpc_sch.o
diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c
deleted file mode 100644
index 54d0fe40845..00000000000
--- a/drivers/mfd/ab5500-core.c
+++ /dev/null
@@ -1,1439 +0,0 @@
-/*
- * Copyright (C) 2007-2011 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Low-level core for exclusive access to the AB5500 IC on the I2C bus
- * and some basic chip-configuration.
- * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
- * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
- * Author: Mattias Wallin <mattias.wallin@stericsson.com>
- * Author: Rickard Andersson <rickard.andersson@stericsson.com>
- * Author: Karl Komierowski  <karl.komierowski@stericsson.com>
- * Author: Bibek Basu <bibek.basu@stericsson.com>
- *
- * TODO: Event handling with irq_chip. Waiting for PRCMU fw support.
- */
-
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/random.h>
-#include <linux/mfd/abx500.h>
-#include <linux/mfd/abx500/ab5500.h>
-#include <linux/list.h>
-#include <linux/bitops.h>
-#include <linux/spinlock.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/db5500-prcmu.h>
-
-#include "ab5500-core.h"
-#include "ab5500-debugfs.h"
-
-#define AB5500_NUM_EVENT_REG 23
-#define AB5500_IT_LATCH0_REG 0x40
-#define AB5500_IT_MASK0_REG 0x60
-
-/*
- * Permissible register ranges for reading and writing per device and bank.
- *
- * The ranges must be listed in increasing address order, and no overlaps are
- * allowed. It is assumed that write permission implies read permission
- * (i.e. only RO and RW permissions should be used).  Ranges with write
- * permission must not be split up.
- */
-
-#define NO_RANGE {.count = 0, .range = NULL,}
-static struct ab5500_i2c_banks ab5500_bank_ranges[AB5500_NUM_DEVICES] = {
-	[AB5500_DEVID_USB] =  {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_USB,
-				.nranges = 12,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x01,
-						.last = 0x01,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x80,
-						.last = 0x83,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x87,
-						.last = 0x8A,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x8B,
-						.last = 0x8B,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0x91,
-						.last = 0x92,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0x93,
-						.last = 0x93,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x94,
-						.last = 0x94,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0xA8,
-						.last = 0xB0,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0xB2,
-						.last = 0xB2,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0xB4,
-						.last = 0xBC,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0xBF,
-						.last = 0xBF,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0xC1,
-						.last = 0xC5,
-						.perm = AB5500_PERM_RO,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_ADC] =  {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_ADC,
-				.nranges = 6,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x1F,
-						.last = 0x22,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0x23,
-						.last = 0x24,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x26,
-						.last = 0x2D,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0x2F,
-						.last = 0x34,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x37,
-						.last = 0x57,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x58,
-						.last = 0x58,
-						.perm = AB5500_PERM_RO,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_LEDS] =  {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_LED,
-				.nranges = 1,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x00,
-						.last = 0x0C,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_VIDEO] =   {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_VDENC,
-				.nranges = 12,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x00,
-						.last = 0x08,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x09,
-						.last = 0x09,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0x0A,
-						.last = 0x12,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x15,
-						.last = 0x19,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x1B,
-						.last = 0x21,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x27,
-						.last = 0x2C,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x41,
-						.last = 0x41,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x45,
-						.last = 0x5B,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x5D,
-						.last = 0x5D,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x69,
-						.last = 0x69,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x6C,
-						.last = 0x6D,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x80,
-						.last = 0x81,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_REGULATORS] =   {
-		.nbanks = 2,
-		.bank =  (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_STARTUP,
-				.nranges = 12,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x00,
-						.last = 0x01,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x1F,
-						.last = 0x1F,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x2E,
-						.last = 0x2E,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0x2F,
-						.last = 0x30,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x50,
-						.last = 0x51,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x60,
-						.last = 0x61,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x66,
-						.last = 0x8A,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x8C,
-						.last = 0x96,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0xAA,
-						.last = 0xB4,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0xB7,
-						.last = 0xBF,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0xC1,
-						.last = 0xCA,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0xD3,
-						.last = 0xE0,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-			{
-				.bankid = AB5500_BANK_SIM_USBSIM,
-				.nranges = 1,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x13,
-						.last = 0x19,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_SIM] =   {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_SIM_USBSIM,
-				.nranges = 1,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x13,
-						.last = 0x19,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_RTC] =   {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_RTC,
-				.nranges = 2,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x00,
-						.last = 0x04,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x06,
-						.last = 0x0C,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_CHARGER] =   {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_CHG,
-				.nranges = 2,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x11,
-						.last = 0x11,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0x12,
-						.last = 0x1B,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_FUELGAUGE] =   {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_FG_BATTCOM_ACC,
-				.nranges = 2,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x00,
-						.last = 0x0B,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0x0C,
-						.last = 0x10,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_VIBRATOR] =   {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_VIBRA,
-				.nranges = 2,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x10,
-						.last = 0x13,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0xFE,
-						.last = 0xFE,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_CODEC] =   {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_AUDIO_HEADSETUSB,
-				.nranges = 2,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x00,
-						.last = 0x48,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0xEB,
-						.last = 0xFB,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_POWER] = {
-		.nbanks	= 2,
-		.bank	= (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_STARTUP,
-				.nranges = 1,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x30,
-						.last = 0x30,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-			{
-				.bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
-				.nranges = 1,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x01,
-						.last = 0x01,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-};
-
-#define AB5500_IRQ(bank, bit)	((bank) * 8 + (bit))
-
-/* I appologize for the resource names beeing a mix of upper case
- * and lower case but I want them to be exact as the documentation */
-static struct mfd_cell ab5500_devs[AB5500_NUM_DEVICES] = {
-	[AB5500_DEVID_LEDS] = {
-		.name = "ab5500-leds",
-		.id = AB5500_DEVID_LEDS,
-	},
-	[AB5500_DEVID_POWER] = {
-		.name = "ab5500-power",
-		.id = AB5500_DEVID_POWER,
-	},
-	[AB5500_DEVID_REGULATORS] = {
-		.name = "ab5500-regulator",
-		.id = AB5500_DEVID_REGULATORS,
-	},
-	[AB5500_DEVID_SIM] = {
-		.name = "ab5500-sim",
-		.id = AB5500_DEVID_SIM,
-		.num_resources = 1,
-		.resources = (struct resource[]) {
-			{
-				.name = "SIMOFF",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(2, 0), /*rising*/
-				.end = AB5500_IRQ(2, 1), /*falling*/
-			},
-		},
-	},
-	[AB5500_DEVID_RTC] = {
-		.name = "ab5500-rtc",
-		.id = AB5500_DEVID_RTC,
-		.num_resources = 1,
-		.resources = (struct resource[]) {
-			{
-				.name	= "RTC_Alarm",
-				.flags	= IORESOURCE_IRQ,
-				.start	= AB5500_IRQ(1, 7),
-				.end	= AB5500_IRQ(1, 7),
-			}
-		},
-	},
-	[AB5500_DEVID_CHARGER] = {
-		.name = "ab5500-charger",
-		.id = AB5500_DEVID_CHARGER,
-	},
-	[AB5500_DEVID_ADC] = {
-		.name = "ab5500-adc",
-		.id = AB5500_DEVID_ADC,
-		.num_resources = 10,
-		.resources = (struct resource[]) {
-			{
-				.name = "TRIGGER-0",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 0),
-				.end = AB5500_IRQ(0, 0),
-			},
-			{
-				.name = "TRIGGER-1",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 1),
-				.end = AB5500_IRQ(0, 1),
-			},
-			{
-				.name = "TRIGGER-2",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 2),
-				.end = AB5500_IRQ(0, 2),
-			},
-			{
-				.name = "TRIGGER-3",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 3),
-				.end = AB5500_IRQ(0, 3),
-			},
-			{
-				.name = "TRIGGER-4",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 4),
-				.end = AB5500_IRQ(0, 4),
-			},
-			{
-				.name = "TRIGGER-5",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 5),
-				.end = AB5500_IRQ(0, 5),
-			},
-			{
-				.name = "TRIGGER-6",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 6),
-				.end = AB5500_IRQ(0, 6),
-			},
-			{
-				.name = "TRIGGER-7",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 7),
-				.end = AB5500_IRQ(0, 7),
-			},
-			{
-				.name = "TRIGGER-VBAT",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 8),
-				.end = AB5500_IRQ(0, 8),
-			},
-			{
-				.name = "TRIGGER-VBAT-TXON",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 9),
-				.end = AB5500_IRQ(0, 9),
-			},
-		},
-	},
-	[AB5500_DEVID_FUELGAUGE] = {
-		.name = "ab5500-fuelgauge",
-		.id = AB5500_DEVID_FUELGAUGE,
-		.num_resources = 6,
-		.resources = (struct resource[]) {
-			{
-				.name = "Batt_attach",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(7, 5),
-				.end = AB5500_IRQ(7, 5),
-			},
-			{
-				.name = "Batt_removal",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(7, 6),
-				.end = AB5500_IRQ(7, 6),
-			},
-			{
-				.name = "UART_framing",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(7, 7),
-				.end = AB5500_IRQ(7, 7),
-			},
-			{
-				.name = "UART_overrun",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(8, 0),
-				.end = AB5500_IRQ(8, 0),
-			},
-			{
-				.name = "UART_Rdy_RX",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(8, 1),
-				.end = AB5500_IRQ(8, 1),
-			},
-			{
-				.name = "UART_Rdy_TX",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(8, 2),
-				.end = AB5500_IRQ(8, 2),
-			},
-		},
-	},
-	[AB5500_DEVID_VIBRATOR] = {
-		.name = "ab5500-vibrator",
-		.id = AB5500_DEVID_VIBRATOR,
-	},
-	[AB5500_DEVID_CODEC] = {
-		.name = "ab5500-codec",
-		.id = AB5500_DEVID_CODEC,
-		.num_resources = 3,
-		.resources = (struct resource[]) {
-			{
-				.name = "audio_spkr1_ovc",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(9, 5),
-				.end = AB5500_IRQ(9, 5),
-			},
-			{
-				.name = "audio_plllocked",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(9, 6),
-				.end = AB5500_IRQ(9, 6),
-			},
-			{
-				.name = "audio_spkr2_ovc",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(17, 4),
-				.end = AB5500_IRQ(17, 4),
-			},
-		},
-	},
-	[AB5500_DEVID_USB] = {
-		.name = "ab5500-usb",
-		.id = AB5500_DEVID_USB,
-		.num_resources = 36,
-		.resources = (struct resource[]) {
-			{
-				.name = "Link_Update",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(22, 1),
-				.end = AB5500_IRQ(22, 1),
-			},
-			{
-				.name = "DCIO",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(8, 3),
-				.end = AB5500_IRQ(8, 4),
-			},
-			{
-				.name = "VBUS_R",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(8, 5),
-				.end = AB5500_IRQ(8, 5),
-			},
-			{
-				.name = "VBUS_F",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(8, 6),
-				.end = AB5500_IRQ(8, 6),
-			},
-			{
-				.name = "CHGstate_10_PCVBUSchg",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(8, 7),
-				.end = AB5500_IRQ(8, 7),
-			},
-			{
-				.name = "DCIOreverse_ovc",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(9, 0),
-				.end = AB5500_IRQ(9, 0),
-			},
-			{
-				.name = "USBCharDetDone",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(9, 1),
-				.end = AB5500_IRQ(9, 1),
-			},
-			{
-				.name = "DCIO_no_limit",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(9, 2),
-				.end = AB5500_IRQ(9, 2),
-			},
-			{
-				.name = "USB_suspend",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(9, 3),
-				.end = AB5500_IRQ(9, 3),
-			},
-			{
-				.name = "DCIOreverse_fwdcurrent",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(9, 4),
-				.end = AB5500_IRQ(9, 4),
-			},
-			{
-				.name = "Vbus_Imeasmax_change",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(9, 5),
-				.end = AB5500_IRQ(9, 6),
-			},
-			{
-				.name = "OVV",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(14, 5),
-				.end = AB5500_IRQ(14, 5),
-			},
-			{
-				.name = "USBcharging_NOTok",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(15, 3),
-				.end = AB5500_IRQ(15, 3),
-			},
-			{
-				.name = "usb_adp_sensoroff",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(15, 6),
-				.end = AB5500_IRQ(15, 6),
-			},
-			{
-				.name = "usb_adp_probeplug",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(15, 7),
-				.end = AB5500_IRQ(15, 7),
-			},
-			{
-				.name = "usb_adp_sinkerror",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(16, 0),
-				.end = AB5500_IRQ(16, 6),
-			},
-			{
-				.name = "usb_adp_sourceerror",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(16, 1),
-				.end = AB5500_IRQ(16, 1),
-			},
-			{
-				.name = "usb_idgnd_r",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(16, 2),
-				.end = AB5500_IRQ(16, 2),
-			},
-			{
-				.name = "usb_idgnd_f",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(16, 3),
-				.end = AB5500_IRQ(16, 3),
-			},
-			{
-				.name = "usb_iddetR1",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(16, 4),
-				.end = AB5500_IRQ(16, 5),
-			},
-			{
-				.name = "usb_iddetR2",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(16, 6),
-				.end = AB5500_IRQ(16, 7),
-			},
-			{
-				.name = "usb_iddetR3",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(17, 0),
-				.end = AB5500_IRQ(17, 1),
-			},
-			{
-				.name = "usb_iddetR4",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(17, 2),
-				.end = AB5500_IRQ(17, 3),
-			},
-			{
-				.name = "CharTempWindowOk",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(17, 7),
-				.end = AB5500_IRQ(18, 0),
-			},
-			{
-				.name = "USB_SprDetect",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(18, 1),
-				.end = AB5500_IRQ(18, 1),
-			},
-			{
-				.name = "usb_adp_probe_unplug",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(18, 2),
-				.end = AB5500_IRQ(18, 2),
-			},
-			{
-				.name = "VBUSChDrop",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(18, 3),
-				.end = AB5500_IRQ(18, 4),
-			},
-			{
-				.name = "dcio_char_rec_done",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(18, 5),
-				.end = AB5500_IRQ(18, 5),
-			},
-			{
-				.name = "Charging_stopped_by_temp",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(18, 6),
-				.end = AB5500_IRQ(18, 6),
-			},
-			{
-				.name = "CHGstate_11_SafeModeVBUS",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(21, 1),
-				.end = AB5500_IRQ(21, 2),
-			},
-			{
-				.name = "CHGstate_12_comletedVBUS",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(21, 2),
-				.end = AB5500_IRQ(21, 2),
-			},
-			{
-				.name = "CHGstate_13_completedVBUS",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(21, 3),
-				.end = AB5500_IRQ(21, 3),
-			},
-			{
-				.name = "CHGstate_14_FullChgDCIO",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(21, 4),
-				.end = AB5500_IRQ(21, 4),
-			},
-			{
-				.name = "CHGstate_15_SafeModeDCIO",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(21, 5),
-				.end = AB5500_IRQ(21, 5),
-			},
-			{
-				.name = "CHGstate_16_OFFsuspendDCIO",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(21, 6),
-				.end = AB5500_IRQ(21, 6),
-			},
-			{
-				.name = "CHGstate_17_completedDCIO",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(21, 7),
-				.end = AB5500_IRQ(21, 7),
-			},
-		},
-	},
-	[AB5500_DEVID_OTP] = {
-		.name = "ab5500-otp",
-		.id = AB5500_DEVID_OTP,
-	},
-	[AB5500_DEVID_VIDEO] = {
-		.name = "ab5500-video",
-		.id = AB5500_DEVID_VIDEO,
-		.num_resources = 1,
-		.resources = (struct resource[]) {
-			{
-				.name = "plugTVdet",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(22, 2),
-				.end = AB5500_IRQ(22, 2),
-			},
-		},
-	},
-	[AB5500_DEVID_DBIECI] = {
-		.name = "ab5500-dbieci",
-		.id = AB5500_DEVID_DBIECI,
-		.num_resources = 10,
-		.resources = (struct resource[]) {
-			{
-				.name = "COLL",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(14, 0),
-				.end = AB5500_IRQ(14, 0),
-			},
-			{
-				.name = "RESERR",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(14, 1),
-				.end = AB5500_IRQ(14, 1),
-			},
-			{
-				.name = "FRAERR",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(14, 2),
-				.end = AB5500_IRQ(14, 2),
-			},
-			{
-				.name = "COMERR",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(14, 3),
-				.end = AB5500_IRQ(14, 3),
-			},
-			{
-				.name = "BSI_indicator",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(14, 4),
-				.end = AB5500_IRQ(14, 4),
-			},
-			{
-				.name = "SPDSET",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(14, 6),
-				.end = AB5500_IRQ(14, 6),
-			},
-			{
-				.name = "DSENT",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(14, 7),
-				.end = AB5500_IRQ(14, 7),
-			},
-			{
-				.name = "DREC",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(15, 0),
-				.end = AB5500_IRQ(15, 0),
-			},
-			{
-				.name = "ACCINT",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(15, 1),
-				.end = AB5500_IRQ(15, 1),
-			},
-			{
-				.name = "NOPINT",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(15, 2),
-				.end = AB5500_IRQ(15, 2),
-			},
-		},
-	},
-	[AB5500_DEVID_ONSWA] = {
-		.name = "ab5500-onswa",
-		.id = AB5500_DEVID_ONSWA,
-		.num_resources = 2,
-		.resources = (struct resource[]) {
-			{
-				.name	= "ONSWAn_rising",
-				.flags	= IORESOURCE_IRQ,
-				.start	= AB5500_IRQ(1, 3),
-				.end	= AB5500_IRQ(1, 3),
-			},
-			{
-				.name	= "ONSWAn_falling",
-				.flags	= IORESOURCE_IRQ,
-				.start	= AB5500_IRQ(1, 4),
-				.end	= AB5500_IRQ(1, 4),
-			},
-		},
-	},
-};
-
-/*
- * Functionality for getting/setting register values.
- */
-int ab5500_get_register_interruptible_raw(struct ab5500 *ab,
-					  u8 bank, u8 reg,
-					  u8 *value)
-{
-	int err;
-
-	if (bank >= AB5500_NUM_BANKS)
-		return -EINVAL;
-
-	err = mutex_lock_interruptible(&ab->access_mutex);
-	if (err)
-		return err;
-	err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, reg, value, 1);
-
-	mutex_unlock(&ab->access_mutex);
-	return err;
-}
-
-static int get_register_page_interruptible(struct ab5500 *ab, u8 bank,
-	u8 first_reg, u8 *regvals, u8 numregs)
-{
-	int err;
-
-	if (bank >= AB5500_NUM_BANKS)
-		return -EINVAL;
-
-	err = mutex_lock_interruptible(&ab->access_mutex);
-	if (err)
-		return err;
-
-	while (numregs) {
-		/* The hardware limit for get page is 4 */
-		u8 curnum = min_t(u8, numregs, 4u);
-
-		err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
-					    first_reg, regvals, curnum);
-		if (err)
-			goto out;
-
-		numregs -= curnum;
-		first_reg += curnum;
-		regvals += curnum;
-	}
-
-out:
-	mutex_unlock(&ab->access_mutex);
-	return err;
-}
-
-int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
-	u8 reg, u8 bitmask, u8 bitvalues)
-{
-	int err = 0;
-
-	if (bank >= AB5500_NUM_BANKS)
-		return -EINVAL;
-
-	if (bitmask) {
-		u8 buf;
-
-		err = mutex_lock_interruptible(&ab->access_mutex);
-		if (err)
-			return err;
-
-		if (bitmask == 0xFF) /* No need to read in this case. */
-			buf = bitvalues;
-		else { /* Read and modify the register value. */
-			err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
-				reg, &buf, 1);
-			if (err)
-				return err;
-
-			buf = ((~bitmask & buf) | (bitmask & bitvalues));
-		}
-		/* Write the new value. */
-		err = db5500_prcmu_abb_write(bankinfo[bank].slave_addr, reg,
-					     &buf, 1);
-
-		mutex_unlock(&ab->access_mutex);
-	}
-	return err;
-}
-
-static int
-set_register_interruptible(struct ab5500 *ab, u8 bank, u8 reg, u8 value)
-{
-	return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg,
-							      0xff, value);
-}
-
-/*
- * Read/write permission checking functions.
- */
-static const struct ab5500_i2c_ranges *get_bankref(u8 devid, u8 bank)
-{
-	u8 i;
-
-	if (devid < AB5500_NUM_DEVICES) {
-		for (i = 0; i < ab5500_bank_ranges[devid].nbanks; i++) {
-			if (ab5500_bank_ranges[devid].bank[i].bankid == bank)
-				return &ab5500_bank_ranges[devid].bank[i];
-		}
-	}
-	return NULL;
-}
-
-static bool page_write_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
-{
-	u8 i; /* range loop index */
-	const struct ab5500_i2c_ranges *bankref;
-
-	bankref = get_bankref(devid, bank);
-	if (bankref == NULL || last_reg < first_reg)
-		return false;
-
-	for (i = 0; i < bankref->nranges; i++) {
-		if (first_reg < bankref->range[i].first)
-			break;
-		if ((last_reg <= bankref->range[i].last) &&
-			(bankref->range[i].perm & AB5500_PERM_WR))
-			return true;
-	}
-	return false;
-}
-
-static bool reg_write_allowed(u8 devid, u8 bank, u8 reg)
-{
-	return page_write_allowed(devid, bank, reg, reg);
-}
-
-static bool page_read_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
-{
-	u8 i;
-	const struct ab5500_i2c_ranges *bankref;