Merge tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD changes from Samuel Ortiz:
 "Besides the usual cleanups, this one brings:

   * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton,
     ST-E's STAX211, Samsung's MAX77693 and TI's LM3533.

   * Device tree support for the twl6040, tps65910, da9502 and ab8500
     drivers.

   * Fairly big tps56910, ab8500 and db8500 updates.

   * i2c support for mc13xxx.

   * Our regular update for the wm8xxx driver from Mark."

Fix up various conflicts with other trees, largely due to ab5500 removal
etc.

* tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits)
  mfd: Fix build break of max77693 by adding REGMAP_I2C option
  mfd: Fix twl6040 build failure
  mfd: Fix max77693 build failure
  mfd: ab8500-core should depend on MFD_DB8500_PRCMU
  gpio: tps65910: dt: process gpio specific device node info
  mfd: Remove the parsing of dt info for tps65910 gpio
  mfd: Save device node parsed platform data for tps65910 sub devices
  mfd: Add r_select to lm3533 platform data
  gpio: Add Intel Centerton support to gpio-sch
  mfd: Emulate active low IRQs as well as active high IRQs for wm831x
  mfd: Mark two lm3533 zone registers as volatile
  mfd: Fix return type of lm533 attribute is_visible
  mfd: Enable Device Tree support in the ab8500-pwm driver
  mfd: Enable Device Tree support in the ab8500-sysctrl driver
  mfd: Add support for Device Tree to twl6040
  mfd: Register the twl6040 child for the ASoC codec unconditionally
  mfd: Allocate twl6040 IRQ numbers dynamically
  mfd: twl6040 code cleanup in interrupt initialization part
  mfd: Enable ab8500-gpadc driver for Device Tree
  mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver
  ...

48 files changed, 4397 insertions, 1142 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f4b4dad7739..e129c820df7 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -106,6 +106,19 @@ config UCB1400_CORE
 	  To compile this driver as a module, choose M here: the
 	  module will be called ucb1400_core.
 
+config MFD_LM3533
+	tristate "LM3533 Lighting Power chip"
+	depends on I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Say yes here to enable support for National Semiconductor / TI
+	  LM3533 Lighting Power chips.
+
+	  This driver provides common support for accessing the device;
+	  additional drivers must be enabled in order to use the LED,
+	  backlight or ambient-light-sensor functionality of the device.
+
 config TPS6105X
 	tristate "TPS61050/61052 Boost Converters"
 	depends on I2C
@@ -177,8 +190,8 @@ config MFD_TPS65910
 	bool "TPS65910 Power Management chip"
 	depends on I2C=y && GPIOLIB
 	select MFD_CORE
-	select GPIO_TPS65910
 	select REGMAP_I2C
+	select IRQ_DOMAIN
 	help
 	  if you say yes here you get support for the TPS65910 series of
 	  Power Management chips.
@@ -409,6 +422,19 @@ config PMIC_ADP5520
 	  individual components like LCD backlight, LEDs, GPIOs and Kepad
 	  under the corresponding menus.
 
+config MFD_MAX77693
+	bool "Maxim Semiconductor MAX77693 PMIC Support"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Say yes here to support for Maxim Semiconductor MAX77693.
+	  This is a companion Power Management IC with Flash, Haptic, Charger,
+	  and MUIC(Micro USB Interface Controller) controls on chip.
+	  This driver provides common support for accessing the device;
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
 config MFD_MAX8925
 	bool "Maxim Semiconductor MAX8925 PMIC Support"
 	depends on I2C=y && GENERIC_HARDIRQS
@@ -454,9 +480,9 @@ config MFD_S5M_CORE
 	 of the device
 
 config MFD_WM8400
-	tristate "Support Wolfson Microelectronics WM8400"
+	bool "Support Wolfson Microelectronics WM8400"
 	select MFD_CORE
-	depends on I2C
+	depends on I2C=y
 	select REGMAP_I2C
 	help
 	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
@@ -473,6 +499,7 @@ config MFD_WM831X_I2C
 	select MFD_CORE
 	select MFD_WM831X
 	select REGMAP_I2C
+	select IRQ_DOMAIN
 	depends on I2C=y && GENERIC_HARDIRQS
 	help
 	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs
@@ -485,6 +512,7 @@ config MFD_WM831X_SPI
 	select MFD_CORE
 	select MFD_WM831X
 	select REGMAP_SPI
+	select IRQ_DOMAIN
 	depends on SPI_MASTER && GENERIC_HARDIRQS
 	help
 	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs
@@ -597,17 +625,32 @@ config MFD_MC13783
 	tristate
 
 config MFD_MC13XXX
-	tristate "Support Freescale MC13783 and MC13892"
-	depends on SPI_MASTER
+	tristate
+	depends on SPI_MASTER || I2C
 	select MFD_CORE
 	select MFD_MC13783
 	help
-	  Support for the Freescale (Atlas) PMIC and audio CODECs
-	  MC13783 and MC13892.
-	  This driver provides common support for accessing  the device,
+	  Enable support for the Freescale MC13783 and MC13892 PMICs.
+	  This driver provides common support for accessing the device,
 	  additional drivers must be enabled in order to use the
 	  functionality of the device.
 
+config MFD_MC13XXX_SPI
+	tristate "Freescale MC13783 and MC13892 SPI interface"
+	depends on SPI_MASTER
+	select REGMAP_SPI
+	select MFD_MC13XXX
+	help
+	  Select this if your MC13xxx is connected via an SPI bus.
+
+config MFD_MC13XXX_I2C
+	tristate "Freescale MC13892 I2C interface"
+	depends on I2C
+	select REGMAP_I2C
+	select MFD_MC13XXX
+	help
+	  Select this if your MC13xxx is connected via an I2C bus.
+
 config ABX500_CORE
 	bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
 	default y if ARCH_U300 || ARCH_U8500
@@ -651,7 +694,7 @@ config EZX_PCAP
 
 config AB8500_CORE
 	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
-	depends on GENERIC_HARDIRQS && ABX500_CORE
+	depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
 	select MFD_CORE
 	help
 	  Select this option to enable access to AB8500 power management
@@ -722,6 +765,16 @@ config LPC_SCH
 	  LPC bridge function of the Intel SCH provides support for
 	  System Management Bus and General Purpose I/O.
 
+config LPC_ICH
+	tristate "Intel ICH LPC"
+	depends on PCI
+	select MFD_CORE
+	help
+	  The LPC bridge function of the Intel ICH provides support for
+	  many functional units. This driver provides needed support for
+	  other drivers to control these functions, currently GPIO and
+	  watchdog.
+
 config MFD_RDC321X
 	tristate "Support for RDC-R321x southbridge"
 	select MFD_CORE
@@ -854,6 +907,11 @@ config MFD_RC5T583
 	  Additional drivers must be enabled in order to use the
 	  different functionality of the device.
 
+config MFD_STA2X11
+	bool "STA2X11 multi function device support"
+	depends on STA2X11
+	select MFD_CORE
+
 config MFD_ANATOP
 	bool "Support for Freescale i.MX on-chip ANATOP controller"
 	depends on SOC_IMX6Q
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 43672b87805..75f6ed68a4b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_MFD_DAVINCI_VOICECODEC)	+= davinci_voicecodec.o
 obj-$(CONFIG_MFD_DM355EVM_MSP)	+= dm355evm_msp.o
 obj-$(CONFIG_MFD_TI_SSP)	+= ti-ssp.o
 
+obj-$(CONFIG_MFD_STA2X11)	+= sta2x11-mfd.o
 obj-$(CONFIG_MFD_STMPE)		+= stmpe.o
 obj-$(CONFIG_STMPE_I2C)		+= stmpe-i2c.o
 obj-$(CONFIG_STMPE_SPI)		+= stmpe-spi.o
@@ -54,6 +55,8 @@ obj-$(CONFIG_TWL6030_PWM)	+= twl6030-pwm.o
 obj-$(CONFIG_TWL6040_CORE)	+= twl6040-core.o twl6040-irq.o
 
 obj-$(CONFIG_MFD_MC13XXX)	+= mc13xxx-core.o
+obj-$(CONFIG_MFD_MC13XXX_SPI)	+= mc13xxx-spi.o
+obj-$(CONFIG_MFD_MC13XXX_I2C)	+= mc13xxx-i2c.o
 
 obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
 
@@ -75,6 +78,7 @@ obj-$(CONFIG_PMIC_DA9052)	+= da9052-core.o
 obj-$(CONFIG_MFD_DA9052_SPI)	+= da9052-spi.o
 obj-$(CONFIG_MFD_DA9052_I2C)	+= da9052-i2c.o
 
+obj-$(CONFIG_MFD_MAX77693)	+= max77693.o max77693-irq.o
 max8925-objs			:= max8925-core.o max8925-i2c.o
 obj-$(CONFIG_MFD_MAX8925)	+= max8925.o
 obj-$(CONFIG_MFD_MAX8997)	+= max8997.o max8997-irq.o
@@ -87,15 +91,15 @@ obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
 obj-$(CONFIG_ABX500_CORE)	+= abx500-core.o
 obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
-obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-sysctrl.o
 obj-$(CONFIG_AB8500_DEBUG)	+= ab8500-debugfs.o
 obj-$(CONFIG_AB8500_GPADC)	+= ab8500-gpadc.o
 obj-$(CONFIG_MFD_DB8500_PRCMU)	+= db8500-prcmu.o
-# ab8500-i2c need to come after db8500-prcmu (which provides the channel)
-obj-$(CONFIG_AB8500_I2C_CORE)	+= ab8500-i2c.o
+# ab8500-core need to come after db8500-prcmu (which provides the channel)
+obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-sysctrl.o
 obj-$(CONFIG_MFD_TIMBERDALE)    += timberdale.o
 obj-$(CONFIG_PMIC_ADP5520)	+= adp5520.o
 obj-$(CONFIG_LPC_SCH)		+= lpc_sch.o
+obj-$(CONFIG_LPC_ICH)		+= lpc_ich.o
 obj-$(CONFIG_MFD_RDC321X)	+= rdc321x-southbridge.o
 obj-$(CONFIG_MFD_JANZ_CMODIO)	+= janz-cmodio.o
 obj-$(CONFIG_MFD_JZ4740_ADC)	+= jz4740-adc.o
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 1f08704f7ae..dac0e299860 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -18,7 +18,10 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/dbx500-prcmu.h>
 #include <linux/regulator/ab8500.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 /*
  * Interrupt register offsets
@@ -91,12 +94,24 @@
 #define AB8500_IT_MASK23_REG		0x56
 #define AB8500_IT_MASK24_REG		0x57
 
+/*
+ * latch hierarchy registers
+ */
+#define AB8500_IT_LATCHHIER1_REG	0x60
+#define AB8500_IT_LATCHHIER2_REG	0x61
+#define AB8500_IT_LATCHHIER3_REG	0x62
+
+#define AB8500_IT_LATCHHIER_NUM		3
+
 #define AB8500_REV_REG			0x80
 #define AB8500_IC_NAME_REG		0x82
 #define AB8500_SWITCH_OFF_STATUS	0x00
 
 #define AB8500_TURN_ON_STATUS		0x00
 
+static bool no_bm; /* No battery management */
+module_param(no_bm, bool, S_IRUGO);
+
 #define AB9540_MODEM_CTRL2_REG			0x23
 #define AB9540_MODEM_CTRL2_SWDBBRSTN_BIT	BIT(2)
 
@@ -125,6 +140,41 @@ static const char ab8500_version_str[][7] = {
 	[AB8500_VERSION_AB8540] = "AB8540",
 };
 
+static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data)
+{
+	int ret;
+
+	ret = prcmu_abb_write((u8)(addr >> 8), (u8)(addr & 0xFF), &data, 1);
+	if (ret < 0)
+		dev_err(ab8500->dev, "prcmu i2c error %d\n", ret);
+	return ret;
+}
+
+static int ab8500_i2c_write_masked(struct ab8500 *ab8500, u16 addr, u8 mask,
+	u8 data)
+{
+	int ret;
+
+	ret = prcmu_abb_write_masked((u8)(addr >> 8), (u8)(addr & 0xFF), &data,
+		&mask, 1);
+	if (ret < 0)
+		dev_err(ab8500->dev, "prcmu i2c error %d\n", ret);
+	return ret;
+}
+
+static int ab8500_i2c_read(struct ab8500 *ab8500, u16 addr)
+{
+	int ret;
+	u8 data;
+
+	ret = prcmu_abb_read((u8)(addr >> 8), (u8)(addr & 0xFF), &data, 1);
+	if (ret < 0) {
+		dev_err(ab8500->dev, "prcmu i2c error %d\n", ret);
+		return ret;
+	}
+	return (int)data;
+}
+
 static int ab8500_get_chip_id(struct device *dev)
 {
 	struct ab8500 *ab8500;
@@ -161,9 +211,13 @@ static int set_register_interruptible(struct ab8500 *ab8500, u8 bank,
 static int ab8500_set_register(struct device *dev, u8 bank,
 	u8 reg, u8 value)
 {
+	int ret;
 	struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
 
-	return set_register_interruptible(ab8500, bank, reg, value);
+	atomic_inc(&ab8500->transfer_ongoing);
+	ret = set_register_interruptible(ab8500, bank, reg, value);
+	atomic_dec(&ab8500->transfer_ongoing);
+	return ret;
 }
 
 static int get_register_interruptible(struct ab8500 *ab8500, u8 bank,
@@ -192,9 +246,13 @@ static int get_register_interruptible(struct ab8500 *ab8500, u8 bank,
 static int ab8500_get_register(struct device *dev, u8 bank,
 	u8 reg, u8 *value)
 {
+	int ret;
 	struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
 
-	return get_register_interruptible(ab8500, bank, reg, value);
+	atomic_inc(&ab8500->transfer_ongoing);
+	ret = get_register_interruptible(ab8500, bank, reg, value);
+	atomic_dec(&ab8500->transfer_ongoing);
+	return ret;
 }
 
 static int mask_and_set_register_interruptible(struct ab8500 *ab8500, u8 bank,
@@ -241,11 +299,14 @@ out:
 static int ab8500_mask_and_set_register(struct device *dev,
 	u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
 {
+	int ret;
 	struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
 
-	return mask_and_set_register_interruptible(ab8500, bank, reg,
-		bitmask, bitvalues);
-
+	atomic_inc(&ab8500->transfer_ongoing);
+	ret= mask_and_set_register_interruptible(ab8500, bank, reg,
+						 bitmask, bitvalues);
+	atomic_dec(&ab8500->transfer_ongoing);
+	return ret;
 }
 
 static struct abx500_ops ab8500_ops = {
@@ -264,6 +325,7 @@ static void ab8500_irq_lock(struct irq_data *data)
 	struct ab8500 *ab8500 = irq_data_get_irq_chip_data(data);
 
 	mutex_lock(&ab8500->irq_lock);
+	atomic_inc(&ab8500->transfer_ongoing);
 }
 
 static void ab8500_irq_sync_unlock(struct irq_data *data)
@@ -292,7 +354,7 @@ static void ab8500_irq_sync_unlock(struct irq_data *data)
 		reg = AB8500_IT_MASK1_REG + ab8500->irq_reg_offset[i];
 		set_register_interruptible(ab8500, AB8500_INTERRUPT, reg, new);
 	}
-
+	atomic_dec(&ab8500->transfer_ongoing);
 	mutex_unlock(&ab8500->irq_lock);
 }
 
@@ -325,6 +387,90 @@ static struct irq_chip ab8500_irq_chip = {
 	.irq_unmask		= ab8500_irq_unmask,
 };
 
+static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
+					int latch_offset, u8 latch_val)
+{
+	int int_bit = __ffs(latch_val);
+	int line, i;
+
+	do {
+		int_bit = __ffs(latch_val);
+
+		for (i = 0; i < ab8500->mask_size; i++)
+			if (ab8500->irq_reg_offset[i] == latch_offset)
+				break;
+
+		if (i >= ab8500->mask_size) {
+			dev_err(ab8500->dev, "Register offset 0x%2x not declared\n",
+					latch_offset);
+			return -ENXIO;
+		}
+
+		line = (i << 3) + int_bit;
+		latch_val &= ~(1 << int_bit);
+
+		handle_nested_irq(ab8500->irq_base + line);
+	} while (latch_val);
+
+	return 0;
+}
+
+static int ab8500_handle_hierarchical_latch(struct ab8500 *ab8500,
+					int hier_offset, u8 hier_val)
+{
+	int latch_bit, status;
+	u8 latch_offset, latch_val;
+
+	do {
+		latch_bit = __ffs(hier_val);
+		latch_offset = (hier_offset << 3) + latch_bit;
+
+		/* Fix inconsistent ITFromLatch25 bit mapping... */
+		if (unlikely(latch_offset == 17))
+			latch_offset = 24;
+
+		status = get_register_interruptible(ab8500,
+				AB8500_INTERRUPT,
+				AB8500_IT_LATCH1_REG + latch_offset,
+				&latch_val);
+		if (status < 0 || latch_val == 0)
+			goto discard;
+
+		status = ab8500_handle_hierarchical_line(ab8500,
+				latch_offset, latch_val);
+		if (status < 0)
+			return status;
+discard:
+		hier_val &= ~(1 << latch_bit);
+	} while (hier_val);
+
+	return 0;
+}
+
+static irqreturn_t ab8500_hierarchical_irq(int irq, void *dev)
+{
+	struct ab8500 *ab8500 = dev;
+	u8 i;
+
+	dev_vdbg(ab8500->dev, "interrupt\n");
+
+	/*  Hierarchical interrupt version */
+	for (i = 0; i < AB8500_IT_LATCHHIER_NUM; i++) {
+		int status;
+		u8 hier_val;
+
+		status = get_register_interruptible(ab8500, AB8500_INTERRUPT,
+			AB8500_IT_LATCHHIER1_REG + i, &hier_val);
+		if (status < 0 || hier_val == 0)
+			continue;
+
+		status = ab8500_handle_hierarchical_latch(ab8500, i, hier_val);
+		if (status < 0)
+			break;
+	}
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t ab8500_irq(int irq, void *dev)
 {
 	struct ab8500 *ab8500 = dev;
@@ -332,6 +478,8 @@ static irqreturn_t ab8500_irq(int irq, void *dev)
 
 	dev_vdbg(ab8500->dev, "interrupt\n");
 
+	atomic_inc(&ab8500->transfer_ongoing);
+
 	for (i = 0; i < ab8500->mask_size; i++) {
 		int regoffset = ab8500->irq_reg_offset[i];
 		int status;
@@ -355,9 +503,10 @@ static irqreturn_t ab8500_irq(int irq, void *dev)
 
 			handle_nested_irq(ab8500->irq_base + line);
 			value &= ~(1 << bit);
+
 		} while (value);
 	}
-
+	atomic_dec(&ab8500->transfer_ongoing);
 	return IRQ_HANDLED;
 }
 
@@ -411,6 +560,14 @@ static void ab8500_irq_remove(struct ab8500 *ab8500)
 	}
 }
 
+int ab8500_suspend(struct ab8500 *ab8500)
+{
+	if (atomic_read(&ab8500->transfer_ongoing))
+		return -EINVAL;
+	else
+		return 0;
+}
+
 /* AB8500 GPIO Resources */
 static struct resource __devinitdata ab8500_gpio_resources[] = {
 	{
@@ -744,6 +901,39 @@ static struct resource __devinitdata ab8500_usb_resources[] = {
 	},
 };
 
+static struct resource __devinitdata ab8505_iddet_resources[] = {
+	{
+		.name  = "KeyDeglitch",
+		.start = AB8505_INT_KEYDEGLITCH,
+		.end   = AB8505_INT_KEYDEGLITCH,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "KP",
+		.start = AB8505_INT_KP,
+		.end   = AB8505_INT_KP,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "IKP",
+		.start = AB8505_INT_IKP,
+		.end   = AB8505_INT_IKP,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "IKR",
+		.start = AB8505_INT_IKR,
+		.end   = AB8505_INT_IKR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "KeyStuck",
+		.start = AB8505_INT_KEYSTUCK,
+		.end   = AB8505_INT_KEYSTUCK,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
 static struct resource __devinitdata ab8500_temp_resources[] = {
 	{
 		.name  = "AB8500_TEMP_WARM",
@@ -778,35 +968,11 @@ static struct mfd_cell __devinitdata abx500_common_devs[] = {
 		.resources = ab8500_rtc_resources,
 	},
 	{
-		.name = "ab8500-charger",
-		.num_resources = ARRAY_SIZE(ab8500_charger_resources),
-		.resources = ab8500_charger_resources,
-	},
-	{
-		.name = "ab8500-btemp",
-		.num_resources = ARRAY_SIZE(ab8500_btemp_resources),
-		.resources = ab8500_btemp_resources,
-	},
-	{
-		.name = "ab8500-fg",
-		.num_resources = ARRAY_SIZE(ab8500_fg_resources),
-		.resources = ab8500_fg_resources,
-	},
-	{
-		.name = "ab8500-chargalg",
-		.num_resources = ARRAY_SIZE(ab8500_chargalg_resources),
-		.resources = ab8500_chargalg_resources,
-	},
-	{
 		.name = "ab8500-acc-det",
 		.num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources),
 		.resources = ab8500_av_acc_detect_resources,
 	},
 	{
-		.name = "ab8500-codec",
-	},
-
-	{
 		.name = "ab8500-poweron-key",
 		.num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources),
 		.resources = ab8500_poweronkey_db_resources,
@@ -834,6 +1000,29 @@ static struct mfd_cell __devinitdata abx500_common_devs[] = {
 	},
 };
 
+static struct mfd_cell __devinitdata ab8500_bm_devs[] = {
+	{
+		.name = "ab8500-charger",
+		.num_resources = ARRAY_SIZE(ab8500_charger_resources),
+		.resources = ab8500_charger_resources,
+	},
+	{
+		.name = "ab8500-btemp",
+		.num_resources = ARRAY_SIZE(ab8500_btemp_resources),
+		.resources = ab8500_btemp_resources,
+	},
+	{
+		.name = "ab8500-fg",
+		.num_resources = ARRAY_SIZE(ab8500_fg_resources),
+		.resources = ab8500_fg_resources,
+	},
+	{
+		.name = "ab8500-chargalg",
+		.num_resources = ARRAY_SIZE(ab8500_chargalg_resources),
+		.resources = ab8500_chargalg_resources,
+	},
+};
+
 static struct mfd_cell __devinitdata ab8500_devs[] = {
 	{
 		.name = "ab8500-gpio",
@@ -845,6 +1034,9 @@ static struct mfd_cell __devinitdata ab8500_devs[] = {
 		.num_resources = ARRAY_SIZE(ab8500_usb_resources),
 		.resources = ab8500_usb_resources,
 	},
+	{
+		.name = "ab8500-codec",
+	},
 };
 
 static struct mfd_cell __devinitdata ab9540_devs[] = {
@@ -858,6 +1050,18 @@ static struct mfd_cell __devinitdata ab9540_devs[] = {
 		.num_resources = ARRAY_SIZE(ab8500_usb_resources),
 		.resources = ab8500_usb_resources,
 	},
+	{
+		.name = "ab9540-codec",
+	},
+};
+
+/* Device list common to ab9540 and ab8505 */
+static struct mfd_cell __devinitdata ab9540_ab8505_devs[] = {
+	{
+		.name = "ab-iddet",
+		.num_resources = ARRAY_SIZE(ab8505_iddet_resources),
+		.resources = ab8505_iddet_resources,
+	},
 };
 
 static ssize_t show_chip_id(struct device *dev,
@@ -1003,18 +1207,66 @@ static struct attribute_group ab9540_attr_group = {
 	.attrs	= ab9540_sysfs_entries,
 };
 
-int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version)
+static const struct of_device_id ab8500_match[] = {
+	{
+		.compatible = "stericsson,ab8500",
+		.data = (void *)AB8500_VERSION_AB8500,
+	},
+	{},
+};
+
+static int __devinit ab8500_probe(struct platform_device *pdev)
 {
-	struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev);
+	struct ab8500_platform_data *plat = dev_get_platdata(&pdev->dev);
+	const struct platform_device_id *platid = platform_get_device_id(pdev);
+	enum ab8500_version version = AB8500_VERSION_UNDEFINED;
+	struct device_node *np = pdev->dev.of_node;
+	struct ab8500 *ab8500;
+	struct resource *resource;
 	int ret;
 	int i;
 	u8 value;
 
+	ab8500 = kzalloc(sizeof *ab8500, GFP_KERNEL);
+	if (!ab8500)
+		return -ENOMEM;
+
 	if (plat)
 		ab8500->irq_base = plat->irq_base;
+	else if (np)
+		ret = of_property_read_u32(np, "stericsson,irq-base", &ab8500->irq_base);
+
+	if (!ab8500->irq_base) {
+		dev_info(&pdev->dev, "couldn't find irq-base\n");
+		ret = -EINVAL;
+		goto out_free_ab8500;
+	}
+
+	ab8500->dev = &pdev->dev;
+
+	resource = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!resource) {
+		ret = -ENODEV;
+		goto out_free_ab8500;
+	}
+
+	ab8500->irq = resource->start;
+
+	ab8500->read = ab8500_i2c_read;
+	ab8500->write = ab8500_i2c_write;
+	ab8500->write_masked = ab8500_i2c_write_masked;
 
 	mutex_init(&ab8500->lock);
 	mutex_init(&ab8500->irq_lock);
+	atomic_set(&ab8500->transfer_ongoing, 0);
+
+	platform_set_drvdata(pdev, ab8500);
+
+	if (platid)
+		version = platid->driver_data;
+	else if (np)
+		version = (unsigned int)
+			of_match_device(ab8500_match, &pdev->dev)->data;
 
 	if (version != AB8500_VERSION_UNDEFINED)
 		ab8500->version = version;
@@ -1022,7 +1274,7 @@ int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version)
 		ret = get_register_interruptible(ab8500, AB8500_MISC,
 			AB8500_IC_NAME_REG, &value);
 		if (ret < 0)
-			return ret;
+			goto out_free_ab8500;
 
 		ab8500->version = value;
 	}
@@ -1030,7 +1282,7 @@ int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version)
 	ret = get_register_interruptible(ab8500, AB8500_MISC,
 		AB8500_REV_REG, &value);
 	if (ret < 0)
-		return ret;
+		goto out_free_ab8500;
 
 	ab8500->chip_id = value;
 
@@ -1105,30 +1357,57 @@ int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version versio