mfd: Add WM8994 interrupt controller support

The WM8994 has an interrupt controller which supports interrupts for
both CODEC and GPIO portions of the chip. Support this using genirq,
while allowing for systems that do not have an interrupt hooked up.

Wrapper functions are provided for the IRQ request and free to simplify
the code in consumer drivers when handling cases where IRQs are not
set up.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>

4 files changed, 353 insertions, 6 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index b2073e0266f..de3e74cde51 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -301,9 +301,9 @@ config MFD_WM8350_I2C
 	  selected to enable support for the functionality of the chip.
 
 config MFD_WM8994
-	tristate "Support Wolfson Microelectronics WM8994"
+	bool "Support Wolfson Microelectronics WM8994"
 	select MFD_CORE
-	depends on I2C
+	depends on I2C=y && GENERIC_HARDIRQS
 	help
 	  The WM8994 is a highly integrated hi-fi CODEC designed for
 	  smartphone applicatiosn.  As well as audio functionality it
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 4fbf8f89a49..87935f967aa 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -26,7 +26,7 @@ wm8350-objs			:= wm8350-core.o wm8350-regmap.o wm8350-gpio.o
 wm8350-objs			+= wm8350-irq.o
 obj-$(CONFIG_MFD_WM8350)	+= wm8350.o
 obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
-obj-$(CONFIG_MFD_WM8994)	+= wm8994-core.o
+obj-$(CONFIG_MFD_WM8994)	+= wm8994-core.o wm8994-irq.o
 
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_MENELAUS)		+= menelaus.o
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 844e1c1b7d9..39cde82afb4 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -172,9 +172,34 @@ static struct mfd_cell wm8994_regulator_devs[] = {
 	{ .name = "wm8994-ldo", .id = 2 },
 };
 
+static struct resource wm8994_codec_resources[] = {
+	{
+		.start = WM8994_IRQ_TEMP_SHUT,
+		.end   = WM8994_IRQ_TEMP_WARN,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm8994_gpio_resources[] = {
+	{
+		.start = WM8994_IRQ_GPIO(1),
+		.end   = WM8994_IRQ_GPIO(11),
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
 static struct mfd_cell wm8994_devs[] = {
-	{ .name = "wm8994-codec" },
-	{ .name = "wm8994-gpio" },
+	{
+		.name = "wm8994-codec",
+		.num_resources = ARRAY_SIZE(wm8994_codec_resources),
+		.resources = wm8994_codec_resources,
+	},
+
+	{
+		.name = "wm8994-gpio",
+		.num_resources = ARRAY_SIZE(wm8994_gpio_resources),
+		.resources = wm8994_gpio_resources,
+	},
 };
 
 /*
@@ -235,6 +260,11 @@ static int wm8994_device_resume(struct device *dev)
 		return ret;
 	}
 
+	ret = wm8994_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK,
+			   WM8994_NUM_IRQ_REGS * 2, &wm8994->irq_masks_cur);
+	if (ret < 0)
+		dev_err(dev, "Failed to restore interrupt masks: %d\n", ret);
+
 	ret = wm8994_write(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2,
 			   &wm8994->ldo_regs);
 	if (ret < 0)
@@ -347,6 +377,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, unsigned long id, int irq)
 
 
 	if (pdata) {
+		wm8994->irq_base = pdata->irq_base;
 		wm8994->gpio_base = pdata->gpio_base;
 
 		/* GPIO configuration is only applied if it's non-zero */
@@ -374,16 +405,20 @@ static int wm8994_device_init(struct wm8994 *wm8994, unsigned long id, int irq)
 					WM8994_LDO1_DISCH, 0);
 	}
 
+	wm8994_irq_init(wm8994);
+
 	ret = mfd_add_devices(wm8994->dev, -1,
 			      wm8994_devs, ARRAY_SIZE(wm8994_devs),
 			      NULL, 0);
 	if (ret != 0) {
 		dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
-		goto err_enable;
+		goto err_irq;
 	}
 
 	return 0;
 
+err_irq:
+	wm8994_irq_exit(wm8994);
 err_enable:
 	regulator_bulk_disable(ARRAY_SIZE(wm8994_main_supplies),
 			       wm8994->supplies);
@@ -400,6 +435,7 @@ err:
 static void wm8994_device_exit(struct wm8994 *wm8994)
 {
 	mfd_remove_devices(wm8994->dev);
+	wm8994_irq_exit(wm8994);
 	regulator_bulk_disable(ARRAY_SIZE(wm8994_main_supplies),
 			       wm8994->supplies);
 	regulator_bulk_free(ARRAY_SIZE(wm8994_main_supplies), wm8994->supplies);
@@ -468,6 +504,7 @@ static int wm8994_i2c_probe(struct i2c_client *i2c,
 	wm8994->control_data = i2c;
 	wm8994->read_dev = wm8994_i2c_read_device;
 	wm8994->write_dev = wm8994_i2c_write_device;
+	wm8994->irq = i2c->irq;
 
 	return wm8994_device_init(wm8994, id->driver_data, i2c->irq);
 }
diff --git a/drivers/mfd/wm8994-irq.c b/drivers/mfd/wm8994-irq.c
new file mode 100644
index 00000000000..8400eb1ee5d
--- /dev/null
+++ b/drivers/mfd/wm8994-irq.c
@@ -0,0 +1,310 @@
+/*
+ * wm8994-irq.c  --  Interrupt controller support for Wolfson WM8994
+ *
+ * Copyright 2010 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/interrupt.h>
+
+#include <linux/mfd/wm8994/core.h>
+#include <linux/mfd/wm8994/registers.h>
+
+#include <linux/delay.h>
+
+struct wm8994_irq_data {
+	int reg;
+	int mask;
+};
+
+static struct wm8994_irq_data wm8994_irqs[] = {
+	[WM8994_IRQ_TEMP_SHUT] = {
+		.reg = 2,
+		.mask = WM8994_TEMP_SHUT_EINT,
+	},
+	[WM8994_IRQ_MIC1_DET] = {
+		.reg = 2,
+		.mask = WM8994_MIC1_DET_EINT,
+	},
+	[WM8994_IRQ_MIC1_SHRT] = {
+		.reg = 2,
+		.mask = WM8994_MIC1_SHRT_EINT,
+	},
+	[WM8994_IRQ_MIC2_DET] = {
+		.reg = 2,
+		.mask = WM8994_MIC2_DET_EINT,
+	},
+	[WM8994_IRQ_MIC2_SHRT] = {
+		.reg = 2,
+		.mask = WM8994_MIC2_SHRT_EINT,
+	},
+	[WM8994_IRQ_FLL1_LOCK] = {
+		.reg = 2,
+		.mask = WM8994_FLL1_LOCK_EINT,
+	},
+	[WM8994_IRQ_FLL2_LOCK] = {
+		.reg = 2,
+		.mask = WM8994_FLL2_LOCK_EINT,
+	},
+	[WM8994_IRQ_SRC1_LOCK] = {
+		.reg = 2,
+		.mask = WM8994_SRC1_LOCK_EINT,
+	},
+	[WM8994_IRQ_SRC2_LOCK] = {
+		.reg = 2,
+		.mask = WM8994_SRC2_LOCK_EINT,
+	},
+	[WM8994_IRQ_AIF1DRC1_SIG_DET] = {
+		.reg = 2,
+		.mask = WM8994_AIF1DRC1_SIG_DET,
+	},
+	[WM8994_IRQ_AIF1DRC2_SIG_DET] = {
+		.reg = 2,
+		.mask = WM8994_AIF1DRC2_SIG_DET_EINT,
+	},
+	[WM8994_IRQ_AIF2DRC_SIG_DET] = {
+		.reg = 2,
+		.mask = WM8994_AIF2DRC_SIG_DET_EINT,
+	},
+	[WM8994_IRQ_FIFOS_ERR] = {
+		.reg = 2,
+		.mask = WM8994_FIFOS_ERR_EINT,
+	},
+	[WM8994_IRQ_WSEQ_DONE] = {
+		.reg = 2,
+		.mask = WM8994_WSEQ_DONE_EINT,
+	},
+	[WM8994_IRQ_DCS_DONE] = {
+		.reg = 2,
+		.mask = WM8994_DCS_DONE_EINT,
+	},
+	[WM8994_IRQ_TEMP_WARN] = {
+		.reg = 2,
+		.mask = WM8994_TEMP_WARN_EINT,
+	},
+	[WM8994_IRQ_GPIO(1)] = {
+		.reg = 1,
+		.mask = WM8994_GP1_EINT,
+	},
+	[WM8994_IRQ_GPIO(2)] = {
+		.reg = 1,
+		.mask = WM8994_GP2_EINT,
+	},
+	[WM8994_IRQ_GPIO(3)] = {
+		.reg = 1,
+		.mask = WM8994_GP3_EINT,
+	},
+	[WM8994_IRQ_GPIO(4)] = {
+		.reg = 1,
+		.mask = WM8994_GP4_EINT,
+	},
+	[WM8994_IRQ_GPIO(5)] = {
+		.reg = 1,
+		.mask = WM8994_GP5_EINT,
+	},
+	[WM8994_IRQ_GPIO(6)] = {
+		.reg = 1,
+		.mask = WM8994_GP6_EINT,
+	},
+	[WM8994_IRQ_GPIO(7)] = {
+		.reg = 1,
+		.mask = WM8994_GP7_EINT,
+	},
+	[WM8994_IRQ_GPIO(8)] = {
+		.reg = 1,
+		.mask = WM8994_GP8_EINT,
+	},
+	[WM8994_IRQ_GPIO(9)] = {
+		.reg = 1,
+		.mask = WM8994_GP8_EINT,
+	},
+	[WM8994_IRQ_GPIO(10)] = {
+		.reg = 1,
+		.mask = WM8994_GP10_EINT,
+	},
+	[WM8994_IRQ_GPIO(11)] = {
+		.reg = 1,
+		.mask = WM8994_GP11_EINT,
+	},
+};
+
+static inline int irq_data_to_status_reg(struct wm8994_irq_data *irq_data)
+{
+	return WM8994_INTERRUPT_STATUS_1 - 1 + irq_data->reg;
+}
+
+static inline int irq_data_to_mask_reg(struct wm8994_irq_data *irq_data)
+{
+	return WM8994_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg;
+}
+
+static inline struct wm8994_irq_data *irq_to_wm8994_irq(struct wm8994 *wm8994,
+							int irq)
+{
+	return &wm8994_irqs[irq - wm8994->irq_base];
+}
+
+static void wm8994_irq_lock(unsigned int irq)
+{
+	struct wm8994 *wm8994 = get_irq_chip_data(irq);
+
+	mutex_lock(&wm8994->irq_lock);
+}
+
+static void wm8994_irq_sync_unlock(unsigned int irq)
+{
+	struct wm8994 *wm8994 = get_irq_chip_data(irq);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) {
+		/* If there's been a change in the mask write it back
+		 * to the hardware. */
+		if (wm8994->irq_masks_cur[i] != wm8994->irq_masks_cache[i]) {
+			wm8994->irq_masks_cache[i] = wm8994->irq_masks_cur[i];
+			wm8994_reg_write(wm8994,
+					 WM8994_INTERRUPT_STATUS_1_MASK + i,
+					 wm8994->irq_masks_cur[i]);
+		}
+	}
+
+	mutex_unlock(&wm8994->irq_lock);
+}
+
+static void wm8994_irq_unmask(unsigned int irq)
+{
+	struct wm8994 *wm8994 = get_irq_chip_data(irq);
+	struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994, irq);
+
+	wm8994->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask;
+}
+
+static void wm8994_irq_mask(unsigned int irq)
+{
+	struct wm8994 *wm8994 = get_irq_chip_data(irq);
+	struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994, irq);
+
+	wm8994->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask;
+}
+
+static struct irq_chip wm8994_irq_chip = {
+	.name = "wm8994",
+	.bus_lock = wm8994_irq_lock,
+	.bus_sync_unlock = wm8994_irq_sync_unlock,
+	.mask = wm8994_irq_mask,
+	.unmask = wm8994_irq_unmask,
+};
+
+/* The processing of the primary interrupt occurs in a thread so that
+ * we can interact with the device over I2C or SPI. */
+static irqreturn_t wm8994_irq_thread(int irq, void *data)
+{
+	struct wm8994 *wm8994 = data;
+	unsigned int i;
+	u16 status[WM8994_NUM_IRQ_REGS];
+	int ret;
+
+	ret = wm8994_bulk_read(wm8994, WM8994_INTERRUPT_STATUS_1,
+			       WM8994_NUM_IRQ_REGS, status);
+	if (ret < 0) {
+		dev_err(wm8994->dev, "Failed to read interrupt status: %d\n",
+			ret);
+		return IRQ_NONE;
+	}
+
+	/* Apply masking */
+	for (i = 0; i < WM8994_NUM_IRQ_REGS; i++)
+		status[i] &= ~wm8994->irq_masks_cur[i];
+
+	/* Report */
+	for (i = 0; i < ARRAY_SIZE(wm8994_irqs); i++) {
+		if (status[wm8994_irqs[i].reg - 1] & wm8994_irqs[i].mask)
+			handle_nested_irq(wm8994->irq_base + i);
+	}
+
+	/* Ack any unmasked IRQs */
+	for (i = 0; i < ARRAY_SIZE(status); i++) {
+		if (status[i])
+			wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1 + i,
+					 status[i]);
+	}
+
+	return IRQ_HANDLED;
+}
+
+int wm8994_irq_init(struct wm8994 *wm8994)
+{
+	int i, cur_irq, ret;
+
+	mutex_init(&wm8994->irq_lock);
+
+	/* Mask the individual interrupt sources */
+	for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) {
+		wm8994->irq_masks_cur[i] = 0xffff;
+		wm8994->irq_masks_cache[i] = 0xffff;
+		wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK + i,
+				 0xffff);
+	}
+
+	if (!wm8994->irq) {
+		dev_warn(wm8994->dev,
+			 "No interrupt specified, no interrupts\n");
+		wm8994->irq_base = 0;
+		return 0;
+	}
+
+	if (!wm8994->irq_base) {
+		dev_err(wm8994->dev,
+			"No interrupt base specified, no interrupts\n");
+		return 0;
+	}
+
+	/* Register them with genirq */
+	for (cur_irq = wm8994->irq_base;
+	     cur_irq < ARRAY_SIZE(wm8994_irqs) + wm8994->irq_base;
+	     cur_irq++) {
+		set_irq_chip_data(cur_irq, wm8994);
+		set_irq_chip_and_handler(cur_irq, &wm8994_irq_chip,
+					 handle_edge_irq);
+		set_irq_nested_thread(cur_irq, 1);
+
+		/* ARM needs us to explicitly flag the IRQ as valid
+		 * and will set them noprobe when we do so. */
+#ifdef CONFIG_ARM
+		set_irq_flags(cur_irq, IRQF_VALID);
+#else
+		set_irq_noprobe(cur_irq);
+#endif
+	}
+
+	ret = request_threaded_irq(wm8994->irq, NULL, wm8994_irq_thread,
+				   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+				   "wm8994", wm8994);
+	if (ret != 0) {
+		dev_err(wm8994->dev, "Failed to request IRQ %d: %d\n",
+			wm8994->irq, ret);
+		return ret;
+	}
+
+	/* Enable top level interrupt if it was masked */
+	wm8994_reg_write(wm8994, WM8994_INTERRUPT_CONTROL, 0);
+
+	return 0;
+}
+
+void wm8994_irq_exit(struct wm8994 *wm8994)
+{
+	if (wm8994->irq)
+		free_irq(wm8994->irq, wm8994);
+}