diff options
| author | Benoit Cousson <b-cousson@ti.com> | 2012-02-29 19:40:31 +0100 |
|---|---|---|
| committer | Samuel Ortiz <sameo@linux.intel.com> | 2012-03-22 13:04:33 +0100 |
| commit | 78518ffa08fceee42d61359303c58bdd0a82033f (patch) | |
| tree | 3db4458970c145e8b82fa8a31536c700a4479aee /drivers/mfd/twl4030-irq.c | |
| parent | 1b8f333ff49f778a1215f65754c31c02408d1d08 (diff) | |
mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files
During DT adaptation, the irq_alloc_desc was added into twl-core, but
due to the rather different and weird IRQ management required by the twl4030,
it is much better to have a different approach for it.
The issue is that twl4030 uses a two level IRQ mechanism but handles all the
PWR interrupts as part of the twl-core interrupt range. It ends up with a
range of 16 interrupts total for CORE and PWR.
The other twl4030 functionalities already have a dedicated driver and thus
their IRQs and irqdomain can and should be defined localy.
twl6030 is using a single level IRQ controller and thus does not require any
trick.
Move the irq_alloc_desc and irq_domain_add_legacy in twl4030-irq and
twl6030-irq.
Allocate together CORE and PWR IRQs for twl4030-irq.
Conflicts:
drivers/mfd/twl-core.c
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'drivers/mfd/twl4030-irq.c')
| -rw-r--r-- | drivers/mfd/twl4030-irq.c | 29 |
1 files changed, 27 insertions, 2 deletions
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index b31f920feb5..a3dc1d92907 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -28,10 +28,13 @@ */ #include <linux/init.h> +#include <linux/export.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/slab.h> +#include <linux/of.h> +#include <linux/irqdomain.h> #include <linux/i2c/twl.h> #include "twl-core.h" @@ -53,6 +56,8 @@ * base + 8 .. base + 15 SIH for PWR_INT * base + 16 .. base + 33 SIH for GPIO */ +#define TWL4030_CORE_NR_IRQS 8 +#define TWL4030_PWR_NR_IRQS 8 /* PIH register offsets */ #define REG_PIH_ISR_P1 0x01 @@ -695,14 +700,34 @@ int twl4030_sih_setup(int module) /* FIXME pass in which interrupt line we'll use ... */ #define twl_irq_line 0 -int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) +int twl4030_init_irq(struct device *dev, int irq_num) { static struct irq_chip twl4030_irq_chip; + int irq_base, irq_end, nr_irqs; + struct device_node *node = dev->of_node; int status; int i; /* + * TWL core and pwr interrupts must be contiguous because + * the hwirqs numbers are defined contiguously from 1 to 15. + * Create only one domain for both. + */ + nr_irqs = TWL4030_PWR_NR_IRQS + TWL4030_CORE_NR_IRQS; + + irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0); + if (IS_ERR_VALUE(irq_base)) { + dev_err(dev, "Fail to allocate IRQ descs\n"); + return irq_base; + } + + irq_domain_add_legacy(node, nr_irqs, irq_base, 0, + &irq_domain_simple_ops, NULL); + + irq_end = irq_base + TWL4030_CORE_NR_IRQS; + + /* * Mask and clear all TWL4030 interrupts since initially we do * not have any TWL4030 module interrupt handlers present */ @@ -747,7 +772,7 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) goto fail_rqirq; } - return status; + return irq_base; fail_rqirq: /* clean up twl4030_sih_setup */ fail: |