mfd: Add STMPE I/O Expander support

Add support for the STMPE family of I/O Expanders from
STMicroelectronics.  These devices include upto 24 gpios and a varying
selection of blocks, including PWM, keypad, and touchscreen controllers.
This patch adds the MFD core.

[l.fu@pengutronix.de: fix stmpe811 enable hook]
[l.fu@pengutronix.de: add touchscreen platform data]
Acked-by: Luotao Fu <l.fu@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 176 insertions, 0 deletions

diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
new file mode 100644
index 00000000000..991f0ecbeb3
--- /dev/null
+++ b/drivers/mfd/stmpe.h
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#ifndef __STMPE_H
+#define __STMPE_H
+
+#ifdef STMPE_DUMP_BYTES
+static inline void stmpe_dump_bytes(const char *str, const void *buf,
+				    size_t len)
+{
+	print_hex_dump_bytes(str, DUMP_PREFIX_OFFSET, buf, len);
+}
+#else
+static inline void stmpe_dump_bytes(const char *str, const void *buf,
+				    size_t len)
+{
+}
+#endif
+
+/**
+ * struct stmpe_variant_block - information about block
+ * @cell:	base mfd cell
+ * @irq:	interrupt number to be added to each IORESOURCE_IRQ
+ *		in the cell
+ * @block:	block id; used for identification with platform data and for
+ *		enable and altfunc callbacks
+ */
+struct stmpe_variant_block {
+	struct mfd_cell		*cell;
+	int			irq;
+	enum stmpe_block	block;
+};
+
+/**
+ * struct stmpe_variant_info - variant-specific information
+ * @name:	part name
+ * @id_val:	content of CHIPID register
+ * @id_mask:	bits valid in CHIPID register for comparison with id_val
+ * @num_gpios:	number of GPIOS
+ * @af_bits:	number of bits used to specify the alternate function
+ * @blocks:	list of blocks present on this device
+ * @num_blocks:	number of blocks present on this device
+ * @num_irqs:	number of internal IRQs available on this device
+ * @enable:	callback to enable the specified blocks.
+ *		Called with the I/O lock held.
+ * @get_altfunc: callback to get the alternate function number for the
+ *		 specific block
+ */
+struct stmpe_variant_info {
+	const char *name;
+	u16 id_val;
+	u16 id_mask;
+	int num_gpios;
+	int af_bits;
+	const u8 *regs;
+	struct stmpe_variant_block *blocks;
+	int num_blocks;
+	int num_irqs;
+	int (*enable)(struct stmpe *stmpe, unsigned int blocks, bool enable);
+	int (*get_altfunc)(struct stmpe *stmpe, enum stmpe_block block);
+};
+
+#define STMPE_ICR_LSB_HIGH	(1 << 2)
+#define STMPE_ICR_LSB_EDGE	(1 << 1)
+#define STMPE_ICR_LSB_GIM	(1 << 0)
+
+/*
+ * STMPE811
+ */
+
+#define STMPE811_IRQ_TOUCH_DET		0
+#define STMPE811_IRQ_FIFO_TH		1
+#define STMPE811_IRQ_FIFO_OFLOW		2
+#define STMPE811_IRQ_FIFO_FULL		3
+#define STMPE811_IRQ_FIFO_EMPTY		4
+#define STMPE811_IRQ_TEMP_SENS		5
+#define STMPE811_IRQ_ADC		6
+#define STMPE811_IRQ_GPIOC		7
+#define STMPE811_NR_INTERNAL_IRQS	8
+
+#define STMPE811_REG_CHIP_ID		0x00
+#define STMPE811_REG_SYS_CTRL2		0x04
+#define STMPE811_REG_INT_CTRL		0x09
+#define STMPE811_REG_INT_EN		0x0A
+#define STMPE811_REG_INT_STA		0x0B
+#define STMPE811_REG_GPIO_INT_EN	0x0C
+#define STMPE811_REG_GPIO_INT_STA	0x0D
+#define STMPE811_REG_GPIO_SET_PIN	0x10
+#define STMPE811_REG_GPIO_CLR_PIN	0x11
+#define STMPE811_REG_GPIO_MP_STA	0x12
+#define STMPE811_REG_GPIO_DIR		0x13
+#define STMPE811_REG_GPIO_ED		0x14
+#define STMPE811_REG_GPIO_RE		0x15
+#define STMPE811_REG_GPIO_FE		0x16
+#define STMPE811_REG_GPIO_AF		0x17
+
+#define STMPE811_SYS_CTRL2_ADC_OFF	(1 << 0)
+#define STMPE811_SYS_CTRL2_TSC_OFF	(1 << 1)
+#define STMPE811_SYS_CTRL2_GPIO_OFF	(1 << 2)
+#define STMPE811_SYS_CTRL2_TS_OFF	(1 << 3)
+
+/*
+ * STMPE1601
+ */
+
+#define STMPE1601_IRQ_GPIOC		8
+#define STMPE1601_IRQ_PWM3		7
+#define STMPE1601_IRQ_PWM2		6
+#define STMPE1601_IRQ_PWM1		5
+#define STMPE1601_IRQ_PWM0		4
+#define STMPE1601_IRQ_KEYPAD_OVER	2
+#define STMPE1601_IRQ_KEYPAD		1
+#define STMPE1601_IRQ_WAKEUP		0
+#define STMPE1601_NR_INTERNAL_IRQS	9
+
+#define STMPE1601_REG_SYS_CTRL			0x02
+#define STMPE1601_REG_ICR_LSB			0x11
+#define STMPE1601_REG_IER_LSB			0x13
+#define STMPE1601_REG_ISR_MSB			0x14
+#define STMPE1601_REG_CHIP_ID			0x80
+#define STMPE1601_REG_INT_EN_GPIO_MASK_LSB	0x17
+#define STMPE1601_REG_INT_STA_GPIO_MSB		0x18
+#define STMPE1601_REG_GPIO_MP_LSB		0x87
+#define STMPE1601_REG_GPIO_SET_LSB		0x83
+#define STMPE1601_REG_GPIO_CLR_LSB		0x85
+#define STMPE1601_REG_GPIO_SET_DIR_LSB		0x89
+#define STMPE1601_REG_GPIO_ED_MSB		0x8A
+#define STMPE1601_REG_GPIO_RE_LSB		0x8D
+#define STMPE1601_REG_GPIO_FE_LSB		0x8F
+#define STMPE1601_REG_GPIO_AF_U_MSB		0x92
+
+#define STMPE1601_SYS_CTRL_ENABLE_GPIO		(1 << 3)
+#define STMPE1601_SYS_CTRL_ENABLE_KPC		(1 << 1)
+#define STMPE1601_SYSCON_ENABLE_SPWM		(1 << 0)
+
+/*
+ * STMPE24xx
+ */
+
+#define STMPE24XX_IRQ_GPIOC		8
+#define STMPE24XX_IRQ_PWM2		7
+#define STMPE24XX_IRQ_PWM1		6
+#define STMPE24XX_IRQ_PWM0		5
+#define STMPE24XX_IRQ_ROT_OVER		4
+#define STMPE24XX_IRQ_ROT		3
+#define STMPE24XX_IRQ_KEYPAD_OVER	2
+#define STMPE24XX_IRQ_KEYPAD		1
+#define STMPE24XX_IRQ_WAKEUP		0
+#define STMPE24XX_NR_INTERNAL_IRQS	9
+
+#define STMPE24XX_REG_SYS_CTRL		0x02
+#define STMPE24XX_REG_ICR_LSB		0x11
+#define STMPE24XX_REG_IER_LSB		0x13
+#define STMPE24XX_REG_ISR_MSB		0x14
+#define STMPE24XX_REG_CHIP_ID		0x80
+#define STMPE24XX_REG_IEGPIOR_LSB	0x18
+#define STMPE24XX_REG_ISGPIOR_MSB	0x19
+#define STMPE24XX_REG_GPMR_LSB		0xA5
+#define STMPE24XX_REG_GPSR_LSB		0x85
+#define STMPE24XX_REG_GPCR_LSB		0x88
+#define STMPE24XX_REG_GPDR_LSB		0x8B
+#define STMPE24XX_REG_GPEDR_MSB		0x8C
+#define STMPE24XX_REG_GPRER_LSB		0x91
+#define STMPE24XX_REG_GPFER_LSB		0x94
+#define STMPE24XX_REG_GPAFR_U_MSB	0x9B
+
+#define STMPE24XX_SYS_CTRL_ENABLE_GPIO		(1 << 3)
+#define STMPE24XX_SYSCON_ENABLE_PWM		(1 << 2)
+#define STMPE24XX_SYS_CTRL_ENABLE_KPC		(1 << 1)
+#define STMPE24XX_SYSCON_ENABLE_ROT		(1 << 0)
+
+#endif