aboutsummaryrefslogtreecommitdiff
path: root/drivers/message
diff options
context:
space:
mode:
authorChristoph Hellwig <hch@lst.de>2006-01-13 18:04:41 +0100
committerJames Bottomley <jejb@mulgrave.(none)>2006-01-14 10:54:56 -0600
commit9a28f49adbe4955af8a1306fd36ddae15136dde7 (patch)
treeff161da935cf2a14408b9040f685b9e9a530fd82 /drivers/message
parent9638d89a75776abc614c29cdeece0cc874ea2a4c (diff)
[SCSI] mptsas: support basic hotplug
Adds hotplug support for SAS end devices. Unfortunately the fusion firmware doesn't generate similar events for expanders addition/removal so we can't support them yet. Eric has an idea about a clever scheme to find out about expander changes so that'll be added later on. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/message')
-rw-r--r--drivers/message/fusion/mptbase.h1
-rw-r--r--drivers/message/fusion/mptsas.c338
2 files changed, 308 insertions, 31 deletions
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index 6c48d1f54ac..af9007d498e 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -612,6 +612,7 @@ typedef struct _MPT_ADAPTER
struct list_head list;
struct net_device *netdev;
struct list_head sas_topology;
+ struct mutex sas_topology_mutex;
MPT_SAS_MGMT sas_mgmt;
} MPT_ADAPTER;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 17e9757e728..b2c682fe634 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -5,7 +5,7 @@
*
* Copyright (c) 1999-2005 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
- * Copyright (c) 2005 Dell
+ * Copyright (c) 2005-2006 Dell
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
@@ -86,6 +86,24 @@ static int mptsasInternalCtx = -1; /* Used only for internal commands */
static int mptsasMgmtCtx = -1;
+enum mptsas_hotplug_action {
+ MPTSAS_ADD_DEVICE,
+ MPTSAS_DEL_DEVICE,
+};
+
+struct mptsas_hotplug_event {
+ struct work_struct work;
+ MPT_ADAPTER *ioc;
+ enum mptsas_hotplug_action event_type;
+ u64 sas_address;
+ u32 channel;
+ u32 id;
+ u32 device_info;
+ u16 handle;
+ u16 parent_handle;
+ u8 phy_id;
+};
+
/*
* SAS topology structures
*
@@ -99,8 +117,8 @@ struct mptsas_devinfo {
u8 phy_id; /* phy number of parent device */
u8 port_id; /* sas physical port this device
is assoc'd with */
- u8 target; /* logical target id of this device */
- u8 bus; /* logical bus number of this device */
+ u8 id; /* logical target id of this device */
+ u8 channel; /* logical bus number of this device */
u64 sas_address; /* WWN of this device,
SATA is assigned by HBA,expander */
u32 device_info; /* bitfield detailed info about this device */
@@ -114,6 +132,7 @@ struct mptsas_phyinfo {
u8 programmed_link_rate; /* programmed max/min phy link rate */
struct mptsas_devinfo identify; /* point to phy device info */
struct mptsas_devinfo attached; /* point to attached device info */
+ struct sas_phy *phy;
struct sas_rphy *rphy;
};
@@ -257,24 +276,27 @@ mptsas_slave_alloc(struct scsi_device *sdev)
}
rphy = dev_to_rphy(sdev->sdev_target->dev.parent);
+ mutex_lock(&hd->ioc->sas_topology_mutex);
list_for_each_entry(p, &hd->ioc->sas_topology, list) {
for (i = 0; i < p->num_phys; i++) {
if (p->phy_info[i].attached.sas_address ==
rphy->identify.sas_address) {
vdev->target_id =
- p->phy_info[i].attached.target;
- vdev->bus_id = p->phy_info[i].attached.bus;
+ p->phy_info[i].attached.id;
+ vdev->bus_id = p->phy_info[i].attached.channel;
vdev->lun = sdev->lun;
goto out;
}
}
}
+ mutex_unlock(&hd->ioc->sas_topology_mutex);
printk("No matching SAS device found!!\n");
kfree(vdev);
return -ENODEV;
out:
+ mutex_unlock(&hd->ioc->sas_topology_mutex);
vtarget->ioc_id = vdev->ioc_id;
vtarget->target_id = vdev->target_id;
vtarget->bus_id = vdev->bus_id;
@@ -282,6 +304,42 @@ mptsas_slave_alloc(struct scsi_device *sdev)
return 0;
}
+static void
+mptsas_slave_destroy(struct scsi_device *sdev)
+{
+ struct Scsi_Host *host = sdev->host;
+ MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
+ struct sas_rphy *rphy;
+ struct mptsas_portinfo *p;
+ int i;
+
+ /*
+ * Handle hotplug removal case.
+ * We need to clear out attached data structure.
+ */
+ rphy = dev_to_rphy(sdev->sdev_target->dev.parent);
+
+ mutex_lock(&hd->ioc->sas_topology_mutex);
+ list_for_each_entry(p, &hd->ioc->sas_topology, list) {
+ for (i = 0; i < p->num_phys; i++) {
+ if (p->phy_info[i].attached.sas_address ==
+ rphy->identify.sas_address) {
+ memset(&p->phy_info[i].attached, 0,
+ sizeof(struct mptsas_devinfo));
+ p->phy_info[i].rphy = NULL;
+ goto out;
+ }
+ }
+ }
+
+ out:
+ mutex_unlock(&hd->ioc->sas_topology_mutex);
+ /*
+ * TODO: Issue target reset to flush firmware outstanding commands.
+ */
+ mptscsih_slave_destroy(sdev);
+}
+
static struct scsi_host_template mptsas_driver_template = {
.module = THIS_MODULE,
.proc_name = "mptsas",
@@ -293,7 +351,7 @@ static struct scsi_host_template mptsas_driver_template = {
.slave_alloc = mptsas_slave_alloc,
.slave_configure = mptscsih_slave_configure,
.target_destroy = mptscsih_target_destroy,
- .slave_destroy = mptscsih_slave_destroy,
+ .slave_destroy = mptsas_slave_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
.eh_abort_handler = mptscsih_abort,
.eh_device_reset_handler = mptscsih_dev_reset,
@@ -649,8 +707,8 @@ mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info,
device_info->handle = le16_to_cpu(buffer->DevHandle);
device_info->phy_id = buffer->PhyNum;
device_info->port_id = buffer->PhysicalPort;
- device_info->target = buffer->TargetID;
- device_info->bus = buffer->Bus;
+ device_info->id = buffer->TargetID;
+ device_info->channel = buffer->Bus;
memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64));
device_info->sas_address = le64_to_cpu(sas_address);
device_info->device_info =
@@ -858,36 +916,36 @@ mptsas_parse_device_info(struct sas_identify *identify,
static int mptsas_probe_one_phy(struct device *dev,
struct mptsas_phyinfo *phy_info, int index, int local)
{
- struct sas_phy *port;
+ struct sas_phy *phy;
int error;
- port = sas_phy_alloc(dev, index);
- if (!port)
+ phy = sas_phy_alloc(dev, index);
+ if (!phy)
return -ENOMEM;
- port->port_identifier = phy_info->port_id;
- mptsas_parse_device_info(&port->identify, &phy_info->identify);
+ phy->port_identifier = phy_info->port_id;
+ mptsas_parse_device_info(&phy->identify, &phy_info->identify);
/*
* Set Negotiated link rate.
*/
switch (phy_info->negotiated_link_rate) {
case MPI_SAS_IOUNIT0_RATE_PHY_DISABLED:
- port->negotiated_linkrate = SAS_PHY_DISABLED;
+ phy->negotiated_linkrate = SAS_PHY_DISABLED;
break;
case MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION:
- port->negotiated_linkrate = SAS_LINK_RATE_FAILED;
+ phy->negotiated_linkrate = SAS_LINK_RATE_FAILED;
break;
case MPI_SAS_IOUNIT0_RATE_1_5:
- port->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
break;
case MPI_SAS_IOUNIT0_RATE_3_0:
- port->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
+ phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
break;
case MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE:
case MPI_SAS_IOUNIT0_RATE_UNKNOWN:
default:
- port->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+ phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
break;
}
@@ -896,10 +954,10 @@ static int mptsas_probe_one_phy(struct device *dev,
*/
switch (phy_info->hw_link_rate & MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) {
case MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5:
- port->maximum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ phy->maximum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
break;
case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0:
- port->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+ phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
break;
default:
break;
@@ -911,10 +969,10 @@ static int mptsas_probe_one_phy(struct device *dev,
switch (phy_info->programmed_link_rate &
MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) {
case MPI_SAS_PHY0_PRATE_MAX_RATE_1_5:
- port->maximum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ phy->maximum_linkrate = SAS_LINK_RATE_1_5_GBPS;
break;
case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0:
- port->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS;
+ phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS;
break;
default:
break;
@@ -925,10 +983,10 @@ static int mptsas_probe_one_phy(struct device *dev,
*/
switch (phy_info->hw_link_rate & MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK) {
case MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5:
- port->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
break;
case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0:
- port->minimum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+ phy->minimum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
break;
default:
break;
@@ -940,28 +998,29 @@ static int mptsas_probe_one_phy(struct device *dev,
switch (phy_info->programmed_link_rate &
MPI_SAS_PHY0_PRATE_MIN_RATE_MASK) {
case MPI_SAS_PHY0_PRATE_MIN_RATE_1_5:
- port->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
break;
case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0:
- port->minimum_linkrate = SAS_LINK_RATE_3_0_GBPS;
+ phy->minimum_linkrate = SAS_LINK_RATE_3_0_GBPS;
break;
default:
break;
}
if (local)
- port->local_attached = 1;
+ phy->local_attached = 1;
- error = sas_phy_add(port);
+ error = sas_phy_add(phy);
if (error) {
- sas_phy_free(port);
+ sas_phy_free(phy);
return error;
}
+ phy_info->phy = phy;
if (phy_info->attached.handle) {
struct sas_rphy *rphy;
- rphy = sas_rphy_alloc(port);
+ rphy = sas_rphy_alloc(phy);
if (!rphy)
return 0; /* non-fatal: an rphy can be added later */
@@ -994,7 +1053,10 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index)
if (error)
goto out_free_port_info;
+ mutex_lock(&ioc->sas_topology_mutex);
list_add_tail(&port_info->list, &ioc->sas_topology);
+ mutex_unlock(&ioc->sas_topology_mutex);
+
for (i = 0; i < port_info->num_phys; i++) {
mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i],
(MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER <<
@@ -1047,7 +1109,10 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index)
*handle = port_info->handle;
+ mutex_lock(&ioc->sas_topology_mutex);
list_add_tail(&port_info->list, &ioc->sas_topology);
+ mutex_unlock(&ioc->sas_topology_mutex);
+
for (i = 0; i < port_info->num_phys; i++) {
struct device *parent;
@@ -1079,6 +1144,7 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index)
* HBA phys.
*/
parent = &ioc->sh->shost_gendev;
+ mutex_lock(&ioc->sas_topology_mutex);
list_for_each_entry(p, &ioc->sas_topology, list) {
for (j = 0; j < p->num_phys; j++) {
if (port_info->phy_info[i].identify.handle ==
@@ -1086,6 +1152,7 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index)
parent = &p->phy_info[j].rphy->dev;
}
}
+ mutex_unlock(&ioc->sas_topology_mutex);
mptsas_probe_one_phy(parent, &port_info->phy_info[i],
*index, 0);
@@ -1111,6 +1178,211 @@ mptsas_scan_sas_topology(MPT_ADAPTER *ioc)
;
}
+static struct mptsas_phyinfo *
+mptsas_find_phyinfo_by_parent(MPT_ADAPTER *ioc, u16 parent_handle, u8 phy_id)
+{
+ struct mptsas_portinfo *port_info;
+ struct mptsas_devinfo device_info;
+ struct mptsas_phyinfo *phy_info = NULL;
+ int i, error;
+
+ /*
+ * Retrieve the parent sas_address
+ */
+ error = mptsas_sas_device_pg0(ioc, &device_info,
+ (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+ parent_handle);
+ if (error) {
+ printk("mptsas: failed to retrieve device page\n");
+ return NULL;
+ }
+
+ /*
+ * The phy_info structures are never deallocated during lifetime of
+ * a host, so the code below is safe without additional refcounting.
+ */
+ mutex_lock(&ioc->sas_topology_mutex);
+ list_for_each_entry(port_info, &ioc->sas_topology, list) {
+ for (i = 0; i < port_info->num_phys; i++) {
+ if (port_info->phy_info[i].identify.sas_address ==
+ device_info.sas_address &&
+ port_info->phy_info[i].phy_id == phy_id) {
+ phy_info = &port_info->phy_info[i];
+ break;
+ }
+ }
+ }
+ mutex_unlock(&ioc->sas_topology_mutex);
+
+ return phy_info;
+}
+
+static struct mptsas_phyinfo *
+mptsas_find_phyinfo_by_handle(MPT_ADAPTER *ioc, u16 handle)
+{
+ struct mptsas_portinfo *port_info;
+ struct mptsas_phyinfo *phy_info = NULL;
+ int i;
+
+ /*
+ * The phy_info structures are never deallocated during lifetime of
+ * a host, so the code below is safe without additional refcounting.
+ */
+ mutex_lock(&ioc->sas_topology_mutex);
+ list_for_each_entry(port_info, &ioc->sas_topology, list) {
+ for (i = 0; i < port_info->num_phys; i++) {
+ if (port_info->phy_info[i].attached.handle == handle) {
+ phy_info = &port_info->phy_info[i];
+ break;
+ }
+ }
+ }
+ mutex_unlock(&ioc->sas_topology_mutex);
+
+ return phy_info;
+}
+
+static void
+mptsas_hotplug_work(void *arg)
+{
+ struct mptsas_hotplug_event *ev = arg;
+ MPT_ADAPTER *ioc = ev->ioc;
+ struct mptsas_phyinfo *phy_info;
+ struct sas_rphy *rphy;
+ char *ds = NULL;
+
+ if (ev->device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET)
+ ds = "ssp";
+ if (ev->device_info & MPI_SAS_DEVICE_INFO_STP_TARGET)
+ ds = "stp";
+ if (ev->device_info & MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+ ds = "sata";
+
+ switch (ev->event_type) {
+ case MPTSAS_DEL_DEVICE:
+ printk(MYIOC_s_INFO_FMT
+ "removing %s device, channel %d, id %d, phy %d\n",
+ ioc->name, ds, ev->channel, ev->id, ev->phy_id);
+
+ phy_info = mptsas_find_phyinfo_by_handle(ioc, ev->handle);
+ if (!phy_info) {
+ printk("mptsas: remove event for non-existant PHY.\n");
+ break;
+ }
+
+ if (phy_info->rphy) {
+ sas_rphy_delete(phy_info->rphy);
+ phy_info->rphy = NULL;
+ }
+ break;
+ case MPTSAS_ADD_DEVICE:
+ printk(MYIOC_s_INFO_FMT
+ "attaching %s device, channel %d, id %d, phy %d\n",
+ ioc->name, ds, ev->channel, ev->id, ev->phy_id);
+
+ phy_info = mptsas_find_phyinfo_by_parent(ioc,
+ ev->parent_handle, ev->phy_id);
+ if (!phy_info) {
+ printk("mptsas: add event for non-existant PHY.\n");
+ break;
+ }
+
+ if (phy_info->rphy) {
+ printk("mptsas: trying to add existing device.\n");
+ break;
+ }
+
+ /* fill attached info */
+ phy_info->attached.handle = ev->handle;
+ phy_info->attached.phy_id = ev->phy_id;
+ phy_info->attached.port_id = phy_info->identify.port_id;
+ phy_info->attached.id = ev->id;
+ phy_info->attached.channel = ev->channel;
+ phy_info->attached.sas_address = ev->sas_address;
+ phy_info->attached.device_info = ev->device_info;
+
+ rphy = sas_rphy_alloc(phy_info->phy);
+ if (!rphy)
+ break; /* non-fatal: an rphy can be added later */
+
+ mptsas_parse_device_info(&rphy->identify, &phy_info->attached);
+ if (sas_rphy_add(rphy)) {
+ sas_rphy_free(rphy);
+ break;
+ }
+
+ phy_info->rphy = rphy;
+ break;
+ }
+
+ kfree(ev);
+}
+
+static void
+mptscsih_send_sas_event(MPT_ADAPTER *ioc,
+ EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data)
+{
+ struct mptsas_hotplug_event *ev;
+ u32 device_info = le32_to_cpu(sas_event_data->DeviceInfo);
+ __le64 sas_address;
+
+ if ((device_info &
+ (MPI_SAS_DEVICE_INFO_SSP_TARGET |
+ MPI_SAS_DEVICE_INFO_STP_TARGET |
+ MPI_SAS_DEVICE_INFO_SATA_DEVICE )) == 0)
+ return;
+
+ if ((sas_event_data->ReasonCode &
+ (MPI_EVENT_SAS_DEV_STAT_RC_ADDED |
+ MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING)) == 0)
+ return;
+
+ ev = kmalloc(sizeof(*ev), GFP_ATOMIC);
+ if (!ev) {
+ printk(KERN_WARNING "mptsas: lost hotplug event\n");
+ return;
+ }
+
+
+ INIT_WORK(&ev->work, mptsas_hotplug_work, ev);
+ ev->ioc = ioc;
+ ev->handle = le16_to_cpu(sas_event_data->DevHandle);
+ ev->parent_handle = le16_to_cpu(sas_event_data->ParentDevHandle);
+ ev->channel = sas_event_data->Bus;
+ ev->id = sas_event_data->TargetID;
+ ev->phy_id = sas_event_data->PhyNum;
+ memcpy(&sas_address, &sas_event_data->SASAddress, sizeof(__le64));
+ ev->sas_address = le64_to_cpu(sas_address);
+ ev->device_info = device_info;
+
+ if (sas_event_data->ReasonCode & MPI_EVENT_SAS_DEV_STAT_RC_ADDED)
+ ev->event_type = MPTSAS_ADD_DEVICE;
+ else
+ ev->event_type = MPTSAS_DEL_DEVICE;
+
+ schedule_work(&ev->work);
+}
+
+static int
+mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
+{
+ u8 event = le32_to_cpu(reply->Event) & 0xFF;
+
+ if (!ioc->sh)
+ return 1;
+
+ switch (event) {
+ case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
+ mptscsih_send_sas_event(ioc,
+ (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data);
+ return 1; /* currently means nothing really */
+
+ default:
+ return mptscsih_event_process(ioc, reply);
+ }
+}
+
static int
mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
@@ -1203,6 +1475,8 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
sh->unique_id = ioc->id;
INIT_LIST_HEAD(&ioc->sas_topology);
+ mutex_init(&ioc->sas_topology_mutex);
+
init_MUTEX(&ioc->sas_mgmt.mutex);
init_completion(&ioc->sas_mgmt.done);
@@ -1339,10 +1613,12 @@ static void __devexit mptsas_remove(struct pci_dev *pdev)
sas_remove_host(ioc->sh);
+ mutex_lock(&ioc->sas_topology_mutex);
list_for_each_entry_safe(p, n, &ioc->sas_topology, list) {
list_del(&p->list);
kfree(p);
}
+ mutex_unlock(&ioc->sas_topology_mutex);
mptscsih_remove(pdev);
}
@@ -1393,7 +1669,7 @@ mptsas_init(void)
mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER);
mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER);
- if (mpt_event_register(mptsasDoneCtx, mptscsih_event_process) == 0) {
+ if (mpt_event_register(mptsasDoneCtx, mptsas_event_process) == 0) {
devtprintk((KERN_INFO MYNAM
": Registered for IOC event notifications\n"));
}