merge by hand (fix up qla_os.c merge error)

25 files changed, 3294 insertions, 1420 deletions

diff --git a/drivers/message/fusion/Kconfig b/drivers/message/fusion/Kconfig
index 452418b24d7..33f209a39cb 100644
--- a/drivers/message/fusion/Kconfig
+++ b/drivers/message/fusion/Kconfig
@@ -2,34 +2,54 @@
 menu "Fusion MPT device support"
 
 config FUSION
-	tristate "Fusion MPT (base + ScsiHost) drivers"
+	bool
+	default n
+
+config FUSION_SPI
+	tristate "Fusion MPT ScsiHost drivers for SPI"
+	depends on PCI && SCSI
+	select FUSION
+	---help---
+	  SCSI HOST support for a parallel SCSI host adapters.
+
+	  List of supported controllers:
+
+	  LSI53C1020
+	  LSI53C1020A
+	  LSI53C1030
+	  LSI53C1035
+
+config FUSION_FC
+	tristate "Fusion MPT ScsiHost drivers for FC"
 	depends on PCI && SCSI
+	select FUSION
 	---help---
-	  LSI Logic Fusion(TM) Message Passing Technology (MPT) device support
-	  provides high performance SCSI host initiator, and LAN [1] interface
-	  services to a host system.  The Fusion architecture is capable of
-	  duplexing these protocols on high-speed Fibre Channel
-	  (up to 2 GHz x 2 ports = 4 GHz) and parallel SCSI (up to Ultra-320)
-	  physical medium.
+	  SCSI HOST support for a Fiber Channel host adapters.
 
-	  [1] LAN is not supported on parallel SCSI medium.
+	  List of supported controllers:
+
+	  LSIFC909
+	  LSIFC919
+	  LSIFC919X
+	  LSIFC929
+	  LSIFC929X
+	  LSIFC929XL
 
 config FUSION_MAX_SGE
-	int "Maximum number of scatter gather entries"
+	int "Maximum number of scatter gather entries (16 - 128)"
 	depends on FUSION
-	default "40"
+	default "128"
+	range 16 128
 	help
 	  This option allows you to specify the maximum number of scatter-
-	  gather entries per I/O. The driver defaults to 40, a reasonable number
-	  for most systems. However, the user may increase this up to 128.
-	  Increasing this parameter will require significantly more memory 
-	  on a per controller instance. Increasing the parameter is not
-	  necessary (or recommended) unless the user will be running 
-	  large I/O's via the raw interface.
+	  gather entries per I/O. The driver default is 128, which matches
+	  SCSI_MAX_PHYS_SEGMENTS. However, it may decreased down to 16.
+	  Decreasing this parameter will reduce memory requirements
+	  on a per controller instance.
 
 config FUSION_CTL
 	tristate "Fusion MPT misc device (ioctl) driver"
-	depends on FUSION
+	depends on FUSION_SPI || FUSION_FC
 	---help---
 	  The Fusion MPT misc device driver provides specialized control
 	  of MPT adapters via system ioctl calls.  Use of ioctl calls to
@@ -48,7 +68,7 @@ config FUSION_CTL
 
 config FUSION_LAN
 	tristate "Fusion MPT LAN driver"
-	depends on FUSION && NET_FC
+	depends on FUSION_FC && NET_FC
 	---help---
 	  This module supports LAN IP traffic over Fibre Channel port(s)
 	  on Fusion MPT compatible hardware (LSIFC9xx chips).
diff --git a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile
index f6fdcaaefc8..1d2f9db813c 100644
--- a/drivers/message/fusion/Makefile
+++ b/drivers/message/fusion/Makefile
@@ -1,52 +1,38 @@
-#
-# Makefile for the LSI Logic Fusion MPT (Message Passing Technology) drivers.
-#
-# Note! If you want to turn on various debug defines for an extended period of
-# time but don't want them lingering around in the Makefile when you pass it on
-# to someone else, use the MPT_CFLAGS env variable (thanks Steve). -nromer
-
-#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-{ LSI_LOGIC
-
-#  Architecture-specific...
-#			# intel
-#EXTRA_CFLAGS += -g
-#			# sparc64
-#EXTRA_CFLAGS += -gstabs+
-
-EXTRA_CFLAGS += ${MPT_CFLAGS}
-
 # Fusion MPT drivers; recognized debug defines...
 #  MPT general:
-#EXTRA_CFLAGS += -DMPT_DEBUG_SCSI
 #EXTRA_CFLAGS += -DMPT_DEBUG
 #EXTRA_CFLAGS += -DMPT_DEBUG_MSG_FRAME
 #EXTRA_CFLAGS += -DMPT_DEBUG_SG
+#EXTRA_CFLAGS += -DMPT_DEBUG_EVENTS
+#EXTRA_CFLAGS += -DMPT_DEBUG_INIT
+#EXTRA_CFLAGS += -DMPT_DEBUG_EXIT
+#EXTRA_CFLAGS += -DMPT_DEBUG_FAIL
+
 
 #
 # driver/module specifics...
 #
 #  For mptbase:
 #CFLAGS_mptbase.o += -DMPT_DEBUG_HANDSHAKE
+#CFLAGS_mptbase.o += -DMPT_DEBUG_CONFIG
+#CFLAGS_mptbase.o += -DMPT_DEBUG_DL
 #CFLAGS_mptbase.o += -DMPT_DEBUG_IRQ
+#CFLAGS_mptbase.o += -DMPT_DEBUG_RESET
 #
 #  For mptscsih:
-#CFLAGS_mptscsih.o += -DMPT_DEBUG_SCANDV
-#CFLAGS_mptscsih.o += -DMPT_DEBUG_RESET
-#CFLAGS_mptscsih.o += -DMPT_DEBUG_NEH
+#CFLAGS_mptscsih.o += -DMPT_DEBUG_DV
+#CFLAGS_mptscsih.o += -DMPT_DEBUG_NEGO
+#CFLAGS_mptscsih.o += -DMPT_DEBUG_TM
+#CFLAGS_mptscsih.o += -DMPT_DEBUG_SCSI
+#CFLAGS_mptscsih.o += -DMPT_DEBUG_REPLY
 #
 #  For mptctl:
 #CFLAGS_mptctl.o += -DMPT_DEBUG_IOCTL
 #
-#  For mptlan:
-#CFLAGS_mptlan.o += -DMPT_LAN_IO_DEBUG
-#
-#  For isense:
-
-#  EXP...
-##mptscsih-objs	:= scsihost.o scsiherr.o
 
 #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC
 
-obj-$(CONFIG_FUSION)		+= mptbase.o mptscsih.o
+obj-$(CONFIG_FUSION_SPI)	+= mptbase.o mptscsih.o mptspi.o
+obj-$(CONFIG_FUSION_FC)		+= mptbase.o mptscsih.o mptfc.o
 obj-$(CONFIG_FUSION_CTL)	+= mptctl.o
 obj-$(CONFIG_FUSION_LAN)	+= mptlan.o
diff --git a/drivers/message/fusion/lsi/mpi.h b/drivers/message/fusion/lsi/mpi.h
index 9dbb061265f..9f98334e507 100644
--- a/drivers/message/fusion/lsi/mpi.h
+++ b/drivers/message/fusion/lsi/mpi.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2000-2003 LSI Logic Corporation.
+ *  Copyright (c) 2000-2005 LSI Logic Corporation.
  *
  *
  *           Name:  mpi.h
  *          Title:  MPI Message independent structures and definitions
  *  Creation Date:  July 27, 2000
  *
- *    mpi.h Version:  01.05.xx
+ *    mpi.h Version:  01.05.07
  *
  *  Version History
  *  ---------------
@@ -52,6 +52,25 @@
  *                      obsoleted define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX.
  *  04-01-03  01.02.09  New IOCStatus code: MPI_IOCSTATUS_FC_EXCHANGE_CANCELED
  *  06-26-03  01.02.10  Bumped MPI_HEADER_VERSION_UNIT value.
+ *  01-16-04  01.02.11  Added define for MPI_IOCLOGINFO_TYPE_SHIFT.
+ *  04-29-04  01.02.12  Added function codes for MPI_FUNCTION_DIAG_BUFFER_POST
+ *                      and MPI_FUNCTION_DIAG_RELEASE.
+ *                      Added MPI_IOCSTATUS_DIAGNOSTIC_RELEASED define.
+ *                      Bumped MPI_HEADER_VERSION_UNIT value.
+ *  05-11-04  01.03.01  Bumped MPI_VERSION_MINOR for MPI v1.3.
+ *                      Added codes for Inband.
+ *  08-19-04  01.05.01  Added defines for Host Buffer Access Control doorbell.
+ *                      Added define for offset of High Priority Request Queue.
+ *                      Added new function codes and new IOCStatus codes.
+ *                      Added a IOCLogInfo type of SAS.
+ *  12-07-04  01.05.02  Bumped MPI_HEADER_VERSION_UNIT.
+ *  12-09-04  01.05.03  Bumped MPI_HEADER_VERSION_UNIT.
+ *  01-15-05  01.05.04  Bumped MPI_HEADER_VERSION_UNIT.
+ *  02-09-05  01.05.05  Bumped MPI_HEADER_VERSION_UNIT.
+ *  02-22-05  01.05.06  Bumped MPI_HEADER_VERSION_UNIT.
+ *  03-11-05  01.05.07  Removed function codes for SCSI IO 32 and
+ *                      TargetAssistExtended requests.
+ *                      Removed EEDP IOCStatus codes.
  *  --------------------------------------------------------------------------
  */
 
@@ -82,7 +101,7 @@
 /* Note: The major versions of 0xe0 through 0xff are reserved */
 
 /* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT             (0x00)
+#define MPI_HEADER_VERSION_UNIT             (0x09)
 #define MPI_HEADER_VERSION_DEV              (0x00)
 #define MPI_HEADER_VERSION_UNIT_MASK        (0xFF00)
 #define MPI_HEADER_VERSION_UNIT_SHIFT       (8)
@@ -122,7 +141,11 @@
 *
 *****************************************************************************/
 
-/* S y s t e m    D o o r b e l l */
+/*
+ * Defines for working with the System Doorbell register.
+ * Values for doorbell function codes are included in the section that defines
+ * all the function codes (further on in this file).
+ */
 #define MPI_DOORBELL_OFFSET                 (0x00000000)
 #define MPI_DOORBELL_ACTIVE                 (0x08000000) /* DoorbellUsed */
 #define MPI_DOORBELL_USED                   (MPI_DOORBELL_ACTIVE)
@@ -134,6 +157,13 @@
 #define MPI_DOORBELL_ADD_DWORDS_MASK        (0x00FF0000)
 #define MPI_DOORBELL_ADD_DWORDS_SHIFT       (16)
 #define MPI_DOORBELL_DATA_MASK              (0x0000FFFF)
+#define MPI_DOORBELL_FUNCTION_SPECIFIC_MASK (0x0000FFFF)
+
+/* values for Host Buffer Access Control doorbell function */
+#define MPI_DB_HPBAC_VALUE_MASK             (0x0000F000)
+#define MPI_DB_HPBAC_ENABLE_ACCESS          (0x01)
+#define MPI_DB_HPBAC_DISABLE_ACCESS         (0x02)
+#define MPI_DB_HPBAC_FREE_BUFFER            (0x03)
 
 
 #define MPI_WRITE_SEQUENCE_OFFSET           (0x00000004)
@@ -257,16 +287,18 @@
 
 #define MPI_FUNCTION_SMP_PASSTHROUGH                (0x1A)
 #define MPI_FUNCTION_SAS_IO_UNIT_CONTROL            (0x1B)
+#define MPI_FUNCTION_SATA_PASSTHROUGH               (0x1C)
 
-#define MPI_DIAG_BUFFER_POST                        (0x1D)
-#define MPI_DIAG_RELEASE                            (0x1E)
-
-#define MPI_FUNCTION_SCSI_IO_32                     (0x1F)
+#define MPI_FUNCTION_DIAG_BUFFER_POST               (0x1D)
+#define MPI_FUNCTION_DIAG_RELEASE                   (0x1E)
 
 #define MPI_FUNCTION_LAN_SEND                       (0x20)
 #define MPI_FUNCTION_LAN_RECEIVE                    (0x21)
 #define MPI_FUNCTION_LAN_RESET                      (0x22)
 
+#define MPI_FUNCTION_TARGET_CMD_BUF_BASE_POST       (0x24)
+#define MPI_FUNCTION_TARGET_CMD_BUF_LIST_POST       (0x25)
+
 #define MPI_FUNCTION_INBAND_BUFFER_POST             (0x28)
 #define MPI_FUNCTION_INBAND_SEND                    (0x29)
 #define MPI_FUNCTION_INBAND_RSP                     (0x2A)
@@ -276,6 +308,7 @@
 #define MPI_FUNCTION_IO_UNIT_RESET                  (0x41)
 #define MPI_FUNCTION_HANDSHAKE                      (0x42)
 #define MPI_FUNCTION_REPLY_FRAME_REMOVAL            (0x43)
+#define MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL    (0x44)
 
 
 /* standard version format */
@@ -328,8 +361,8 @@ typedef struct _SGE_SIMPLE_UNION
         U32                 Address32;
         U64                 Address64;
     }u;
-} SGESimpleUnion_t, MPI_POINTER pSGESimpleUnion_t,
-  SGE_SIMPLE_UNION, MPI_POINTER PTR_SGE_SIMPLE_UNION;
+} SGE_SIMPLE_UNION, MPI_POINTER PTR_SGE_SIMPLE_UNION,
+  SGESimpleUnion_t, MPI_POINTER pSGESimpleUnion_t;
 
 /****************************************************************************/
 /*  Chain element structures                                                */
@@ -648,27 +681,21 @@ typedef struct _MSG_DEFAULT_REPLY
 #define MPI_IOCSTATUS_SCSI_EXT_TERMINATED       (0x004C)
 
 /****************************************************************************/
-/*  For use by SCSI Initiator and SCSI Target end-to-end data protection    */
-/****************************************************************************/
-
-#define MPI_IOCSTATUS_EEDP_CRC_ERROR            (0x004D)
-#define MPI_IOCSTATUS_EEDP_LBA_TAG_ERROR        (0x004E)
-#define MPI_IOCSTATUS_EEDP_APP_TAG_ERROR        (0x004F)
-
-
-/****************************************************************************/
-/*  SCSI (SPI & FCP) target values                                          */
+/*  SCSI Target values                                                      */
 /****************************************************************************/
 
 #define MPI_IOCSTATUS_TARGET_PRIORITY_IO         (0x0060)
 #define MPI_IOCSTATUS_TARGET_INVALID_PORT        (0x0061)
-#define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX    (0x0062)   /* obsolete */
+#define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX    (0x0062)   /* obsolete name */
 #define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX    (0x0062)
 #define MPI_IOCSTATUS_TARGET_ABORTED             (0x0063)
 #define MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE   (0x0064)
 #define MPI_IOCSTATUS_TARGET_NO_CONNECTION       (0x0065)
 #define MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A)
 #define MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT   (0x006B)
+#define MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR   (0x006D)
+#define MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E)
+#define MPI_IOCSTATUS_TARGET_IU_TOO_SHORT        (0x006F)
 
 /****************************************************************************/
 /*  Additional FCP target values (obsolete)                                 */
@@ -707,6 +734,7 @@ typedef struct _MSG_DEFAULT_REPLY
 /****************************************************************************/
 
 #define MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED    (0x0090)
+#define MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN      (0x0091)
 
 /****************************************************************************/
 /*  Inband values                                                           */
diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h
index a5680d864bf..15b12b06799 100644
--- a/drivers/message/fusion/lsi/mpi_cnfg.h
+++ b/drivers/message/fusion/lsi/mpi_cnfg.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2000-2003 LSI Logic Corporation.
+ *  Copyright (c) 2000-2005 LSI Logic Corporation.
  *
  *
  *           Name:  mpi_cnfg.h
  *          Title:  MPI Config message, structures, and Pages
  *  Creation Date:  July 27, 2000
  *
- *    mpi_cnfg.h Version:  01.05.xx
+ *    mpi_cnfg.h Version:  01.05.08
  *
  *  Version History
  *  ---------------
@@ -145,6 +145,93 @@
  *                      In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field
  *                      with ADISCHardALPA.
  *                      Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define.
+ *  01-16-04 01.02.13   Added InitiatorDeviceTimeout and InitiatorIoPendTimeout
+ *                      fields and related defines to CONFIG_PAGE_FC_PORT_1.
+ *                      Added define for
+ *                      MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK.
+ *                      Added new fields to the substructures of
+ *                      CONFIG_PAGE_FC_PORT_10.
+ *  04-29-04 01.02.14   Added define for IDP bit for CONFIG_PAGE_SCSI_PORT_0,
+ *                      CONFIG_PAGE_SCSI_DEVICE_0, and
+ *                      CONFIG_PAGE_SCSI_DEVICE_1. Also bumped Page Version for
+ *                      these pages.
+ *  05-11-04 01.03.01   Added structure for CONFIG_PAGE_INBAND_0.
+ *  08-19-04 01.05.01   Modified MSG_CONFIG request to support extended config
+ *                      pages.
+ *                      Added a new structure for extended config page header.
+ *                      Added new extended config pages types and structures for
+ *                      SAS IO Unit, SAS Expander, SAS Device, and SAS PHY.
+ *                      Replaced a reserved byte in CONFIG_PAGE_MANUFACTURING_4
+ *                      to add a Flags field.
+ *                      Two new Manufacturing config pages (5 and 6).
+ *                      Two new bits defined for IO Unit Page 1 Flags field.
+ *                      Modified CONFIG_PAGE_IO_UNIT_2 to add three new fields
+ *                      to specify the BIOS boot device.
+ *                      Four new Flags bits defined for IO Unit Page 2.
+ *                      Added IO Unit Page 4.
+ *                      Added EEDP Flags settings to IOC Page 1.
+ *                      Added new BIOS Page 1 config page.
+ *  10-05-04 01.05.02   Added define for
+ *                      MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE.
+ *                      Added new Flags field to CONFIG_PAGE_MANUFACTURING_5 and
+ *                      associated defines.
+ *                      Added more defines for SAS IO Unit Page 0
+ *                      DiscoveryStatus field.
+ *                      Added define for MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK
+ *                      and MPI_SAS_IOUNIT0_DS_TABLE_LINK.
+ *                      Added defines for Physical Mapping Modes to SAS IO Unit
+ *                      Page 2.
+ *                      Added define for
+ *                      MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH.
+ *  10-27-04 01.05.03   Added defines for new SAS PHY page addressing mode.
+ *                      Added defines for MaxTargetSpinUp to BIOS Page 1.
+ *                      Added 5 new ControlFlags defines for SAS IO Unit
+ *                      Page 1.
+ *                      Added MaxNumPhysicalMappedIDs field to SAS IO Unit
+ *                      Page 2.
+ *                      Added AccessStatus field to SAS Device Page 0 and added
+ *                      new Flags bits for supported SATA features.
+ *  12-07-04  01.05.04  Added config page structures for BIOS Page 2, RAID
+ *                      Volume Page 1, and RAID Physical Disk Page 1.
+ *                      Replaced IO Unit Page 1 BootTargetID,BootBus, and
+ *                      BootAdapterNum with reserved field.
+ *                      Added DataScrubRate and ResyncRate to RAID Volume
+ *                      Page 0.
+ *                      Added MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT
+ *                      define.
+ *  12-09-04  01.05.05  Added Target Mode Large CDB Enable to FC Port Page 1
+ *                      Flags field.
+ *                      Added Auto Port Config flag define for SAS IOUNIT
+ *                      Page 1 ControlFlags.
+ *                      Added Disabled bad Phy define to Expander Page 1
+ *                      Discovery Info field.
+ *                      Added SAS/SATA device support to SAS IOUnit Page 1
+ *                      ControlFlags.
+ *                      Added Unsupported device to SAS Dev Page 0 Flags field
+ *                      Added disable use SATA Hash Address for SAS IOUNIT
+ *                      page 1 in ControlFields.
+ *  01-15-05  01.05.06  Added defaults for data scrub rate and resync rate to
+ *                      Manufacturing Page 4.
+ *                      Added new defines for BIOS Page 1 IOCSettings field.
+ *                      Added ExtDiskIdentifier field to RAID Physical Disk
+ *                      Page 0.
+ *                      Added new defines for SAS IO Unit Page 1 ControlFlags
+ *                      and to SAS Device Page 0 Flags to control SATA devices.
+ *                      Added defines and structures for the new Log Page 0, a
+ *                      new type of configuration page.
+ *  02-09-05  01.05.07  Added InactiveStatus field to RAID Volume Page 0.
+ *                      Added WWID field to RAID Volume Page 1.
+ *                      Added PhysicalPort field to SAS Expander pages 0 and 1.
+ *  03-11-05  01.05.08  Removed the EEDP flags from IOC Page 1.
+ *                      Added Enclosure/Slot boot device format to BIOS Page 2.
+ *                      New status value for RAID Volume Page 0 VolumeStatus
+ *                      (VolumeState subfield).
+ *                      New value for RAID Physical Page 0 InactiveStatus.
+ *                      Added Inactive Volume Member flag RAID Physical Disk
+ *                      Page 0 PhysDiskStatus field.
+ *                      New physical mapping mode in SAS IO Unit Page 2.
+ *                      Added CONFIG_PAGE_SAS_ENCLOSURE_0.
+ *                      Added Slot and Enclosure fields to SAS Device Page 0.
  *  --------------------------------------------------------------------------
  */
 
@@ -164,7 +251,7 @@ typedef struct _CONFIG_PAGE_HEADER
     U8                      PageLength;                 /* 01h */
     U8                      PageNumber;                 /* 02h */
     U8                      PageType;                   /* 03h */
-} fCONFIG_PAGE_HEADER, MPI_POINTER PTR_CONFIG_PAGE_HEADER,
+} CONFIG_PAGE_HEADER, MPI_POINTER PTR_CONFIG_PAGE_HEADER,
   ConfigPageHeader_t, MPI_POINTER pConfigPageHeader_t;
 
 typedef union _CONFIG_PAGE_HEADER_UNION
@@ -174,7 +261,7 @@ typedef union _CONFIG_PAGE_HEADER_UNION
    U16                 Word16[2];
    U32                 Word32;
 } ConfigPageHeaderUnion, MPI_POINTER pConfigPageHeaderUnion,
-  fCONFIG_PAGE_HEADER_UNION, MPI_POINTER PTR_CONFIG_PAGE_HEADER_UNION;
+  CONFIG_PAGE_HEADER_UNION, MPI_POINTER PTR_CONFIG_PAGE_HEADER_UNION;
 
 typedef struct _CONFIG_EXTENDED_PAGE_HEADER
 {
@@ -185,7 +272,7 @@ typedef struct _CONFIG_EXTENDED_PAGE_HEADER
     U16                 ExtPageLength;              /* 04h */
     U8                  ExtPageType;                /* 06h */
     U8                  Reserved2;                  /* 07h */
-} fCONFIG_EXTENDED_PAGE_HEADER, MPI_POINTER PTR_CONFIG_EXTENDED_PAGE_HEADER,
+} CONFIG_EXTENDED_PAGE_HEADER, MPI_POINTER PTR_CONFIG_EXTENDED_PAGE_HEADER,
   ConfigExtendedPageHeader_t, MPI_POINTER pConfigExtendedPageHeader_t;
 
 
@@ -224,6 +311,8 @@ typedef struct _CONFIG_EXTENDED_PAGE_HEADER
 #define MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER         (0x11)
 #define MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE           (0x12)
 #define MPI_CONFIG_EXTPAGETYPE_SAS_PHY              (0x13)
+#define MPI_CONFIG_EXTPAGETYPE_LOG                  (0x14)
+#define MPI_CONFIG_EXTPAGETYPE_ENCLOSURE            (0x15)
 
 
 /****************************************************************************
@@ -231,10 +320,19 @@ typedef struct _CONFIG_EXTENDED_PAGE_HEADER
 ****************************************************************************/
 #define MPI_SCSI_PORT_PGAD_PORT_MASK                (0x000000FF)
 
+#define MPI_SCSI_DEVICE_FORM_MASK                   (0xF0000000)
+#define MPI_SCSI_DEVICE_FORM_BUS_TID                (0x00000000)
 #define MPI_SCSI_DEVICE_TARGET_ID_MASK              (0x000000FF)
 #define MPI_SCSI_DEVICE_TARGET_ID_SHIFT             (0)
 #define MPI_SCSI_DEVICE_BUS_MASK                    (0x0000FF00)
 #define MPI_SCSI_DEVICE_BUS_SHIFT                   (8)
+#define MPI_SCSI_DEVICE_FORM_TARGET_MODE            (0x10000000)
+#define MPI_SCSI_DEVICE_TM_RESPOND_ID_MASK          (0x000000FF)
+#define MPI_SCSI_DEVICE_TM_RESPOND_ID_SHIFT         (0)
+#define MPI_SCSI_DEVICE_TM_BUS_MASK                 (0x0000FF00)
+#define MPI_SCSI_DEVICE_TM_BUS_SHIFT                (8)
+#define MPI_SCSI_DEVICE_TM_INIT_ID_MASK             (0x00FF0000)
+#define MPI_SCSI_DEVICE_TM_INIT_ID_SHIFT            (16)
 
 #define MPI_FC_PORT_PGAD_PORT_MASK                  (0xF0000000)
 #define MPI_FC_PORT_PGAD_PORT_SHIFT                 (28)
@@ -260,6 +358,20 @@ typedef struct _CONFIG_EXTENDED_PAGE_HEADER
 #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_MASK          (0x000000FF)
 #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_SHIFT         (0)
 
+#define MPI_SAS_EXPAND_PGAD_FORM_MASK             (0xF0000000)
+#define MPI_SAS_EXPAND_PGAD_FORM_SHIFT            (28)
+#define MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE  (0x00000000)
+#define MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM   (0x00000001)
+#define MPI_SAS_EXPAND_PGAD_FORM_HANDLE           (0x00000002)
+#define MPI_SAS_EXPAND_PGAD_GNH_MASK_HANDLE       (0x0000FFFF)
+#define MPI_SAS_EXPAND_PGAD_GNH_SHIFT_HANDLE      (0)
+#define MPI_SAS_EXPAND_PGAD_HPN_MASK_PHY          (0x00FF0000)
+#define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_PHY         (16)
+#define MPI_SAS_EXPAND_PGAD_HPN_MASK_HANDLE       (0x0000FFFF)
+#define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_HANDLE      (0)
+#define MPI_SAS_EXPAND_PGAD_H_MASK_HANDLE         (0x0000FFFF)
+#define MPI_SAS_EXPAND_PGAD_H_SHIFT_HANDLE        (0)
+
 #define MPI_SAS_DEVICE_PGAD_FORM_MASK               (0xF0000000)
 #define MPI_SAS_DEVICE_PGAD_FORM_SHIFT              (28)
 #define MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE    (0x00000000)
@@ -274,10 +386,24 @@ typedef struct _CONFIG_EXTENDED_PAGE_HEADER
 #define MPI_SAS_DEVICE_PGAD_H_HANDLE_MASK           (0x0000FFFF)
 #define MPI_SAS_DEVICE_PGAD_H_HANDLE_SHIFT          (0)
 
-#define MPI_SAS_PHY_PGAD_PHY_NUMBER_MASK            (0x00FF0000)
-#define MPI_SAS_PHY_PGAD_PHY_NUMBER_SHIFT           (16)
-#define MPI_SAS_PHY_PGAD_DEVHANDLE_MASK             (0x0000FFFF)
-#define MPI_SAS_PHY_PGAD_DEVHANDLE_SHIFT            (0)
+#define MPI_SAS_PHY_PGAD_FORM_MASK                  (0xF0000000)
+#define MPI_SAS_PHY_PGAD_FORM_SHIFT                 (28)
+#define MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER            (0x0)
+#define MPI_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX         (0x1)
+#define MPI_SAS_PHY_PGAD_PHY_NUMBER_MASK            (0x000000FF)
+#define MPI_SAS_PHY_PGAD_PHY_NUMBER_SHIFT           (0)
+#define MPI_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK         (0x0000FFFF)
+#define MPI_SAS_PHY_PGAD_PHY_TBL_INDEX_SHIFT        (0)
+
+#define MPI_SAS_ENCLOS_PGAD_FORM_MASK               (0xF0000000)
+#define MPI_SAS_ENCLOS_PGAD_FORM_SHIFT              (28)
+#define MPI_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE    (0x00000000)
+#define MPI_SAS_ENCLOS_PGAD_FORM_HANDLE             (0x00000001)
+#define MPI_SAS_ENCLOS_PGAD_GNH_HANDLE_MASK         (0x0000FFFF)
+#define MPI_SAS_ENCLOS_PGAD_GNH_HANDLE_SHIFT        (0)
+#define MPI_SAS_ENCLOS_PGAD_H_HANDLE_MASK           (0x0000FFFF)
+#define MPI_SAS_ENCLOS_PGAD_H_HANDLE_SHIFT          (0)
+
 
 
 /****************************************************************************
@@ -294,7 +420,7 @@ typedef struct _MSG_CONFIG
     U8                      MsgFlags;                   /* 07h */
     U32                     MsgContext;                 /* 08h */
     U8                      Reserved2[8];               /* 0Ch */
-    fCONFIG_PAGE_HEADER      Header;                     /* 14h */
+    CONFIG_PAGE_HEADER      Header;                     /* 14h */
     U32                     PageAddress;                /* 18h */
     SGE_IO_UNION            PageBufferSGE;              /* 1Ch */
 } MSG_CONFIG, MPI_POINTER PTR_MSG_CONFIG,
@@ -327,7 +453,7 @@ typedef struct _MSG_CONFIG_REPLY
     U8                      Reserved2[2];               /* 0Ch */
     U16                     IOCStatus;                  /* 0Eh */
     U32                     IOCLogInfo;                 /* 10h */
-    fCONFIG_PAGE_HEADER      Header;                     /* 14h */
+    CONFIG_PAGE_HEADER      Header;                     /* 14h */
 } MSG_CONFIG_REPLY, MPI_POINTER PTR_MSG_CONFIG_REPLY,
   ConfigReply_t, MPI_POINTER pConfigReply_t;
 
@@ -349,6 +475,8 @@ typedef struct _MSG_CONFIG_REPLY
 #define MPI_MANUFACTPAGE_DEVICEID_FC929             (0x0622)
 #define MPI_MANUFACTPAGE_DEVICEID_FC919X            (0x0628)
 #define MPI_MANUFACTPAGE_DEVICEID_FC929X            (0x0626)
+#define MPI_MANUFACTPAGE_DEVICEID_FC939X            (0x0642)
+#define MPI_MANUFACTPAGE_DEVICEID_FC949X            (0x0640)
 /* SCSI */
 #define MPI_MANUFACTPAGE_DEVID_53C1030              (0x0030)
 #define MPI_MANUFACTPAGE_DEVID_53C1030ZC            (0x0031)
@@ -358,18 +486,25 @@ typedef struct _MSG_CONFIG_REPLY
 #define MPI_MANUFACTPAGE_DEVID_53C1035ZC            (0x0041)
 /* SAS */
 #define MPI_MANUFACTPAGE_DEVID_SAS1064              (0x0050)
+#define MPI_MANUFACTPAGE_DEVID_SAS1064A             (0x005C)
+#define MPI_MANUFACTPAGE_DEVID_SAS1064E             (0x0056)
+#define MPI_MANUFACTPAGE_DEVID_SAS1066              (0x005E)
+#define MPI_MANUFACTPAGE_DEVID_SAS1066E             (0x005A)
+#define MPI_MANUFACTPAGE_DEVID_SAS1068              (0x0054)
+#define MPI_MANUFACTPAGE_DEVID_SAS1068E             (0x0058)
+#define MPI_MANUFACTPAGE_DEVID_SAS1078              (0x0060)
 
 
 typedef struct _CONFIG_PAGE_MANUFACTURING_0
 {
-    fCONFIG_PAGE_HEADER      Header;                     /* 00h */
+    CONFIG_PAGE_HEADER      Header;                     /* 00h */
     U8                      ChipName[16];               /* 04h */
     U8                      ChipRevision[8];            /* 14h */
     U8                      BoardName[16];              /* 1Ch */
     U8                      BoardAssembly[16];          /* 2Ch */
     U8                      BoardTracerNumber[16];      /* 3Ch */
 
-} fCONFIG_PAGE_MANUFACTURING_0, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_0,
+} CONFIG_PAGE_MANUFACTURING_0, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_0,
   ManufacturingPage0_t, MPI_POINTER pManufacturingPage0_t;
 
 #define MPI_MANUFACTURING0_PAGEVERSION                 (0x00)
@@ -377,9 +512,9 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_0
 
 typedef struct _CONFIG_PAGE_MANUFACTURING_1
 {
-    fCONFIG_PAGE_HEADER      Header;                     /* 00h */
+    CONFIG_PAGE_HEADER      Header;                     /* 00h */
     U8                      VPD[256];                   /* 04h */
-} fCONFIG_PAGE_MANUFACTURING_1, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_1,
+} CONFIG_PAGE_MANUFACTURING_1, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_1,
   ManufacturingPage1_t, MPI_POINTER pManufacturingPage1_t;
 
 #define MPI_MANUFACTURING1_PAGEVERSION                 (0x00)
@@ -404,10 +539,10 @@ typedef struct _MPI_CHIP_REVISION_ID
 
 typedef struct _CONFIG_PAGE_MANUFACTURING_2
 {
-    fCONFIG_PAGE_HEADER      Header;                                 /* 00h */
+    CONFIG_PAGE_HEADER      Header;                                 /* 00h */
     MPI_CHIP_REVISION_ID    ChipId;                                 /* 04h */
     U32                     HwSettings[MPI_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 08h */
-} fCONFIG_PAGE_MANUFACTURING_2, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_2,
+} CONFIG_PAGE_MANUFACTURING_2, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_2,
   ManufacturingPage2_t, MPI_POINTER pManufacturingPage2_t;
 
 #define MPI_MANUFACTURING2_PAGEVERSION                  (0x00)
@@ -423,10 +558,10 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_2
 
 typedef struct _CONFIG_PAGE_MANUFACTURING_3
 {
-    fCONFIG_PAGE_HEADER                  Header;                     /* 00h */
+    CONFIG_PAGE_HEADER                  Header;                     /* 00h */
     MPI_CHIP_REVISION_ID                ChipId;                     /* 04h */
     U32                                 Info[MPI_MAN_PAGE_3_INFO_WORDS];/* 08h */
-} fCONFIG_PAGE_MANUFACTURING_3, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_3,
+} CONFIG_PAGE_MANUFACTURING_3, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_3,
   ManufacturingPage3_t, MPI_POINTER pManufacturingPage3_t;
 
 #define MPI_MANUFACTURING3_PAGEVERSION                  (0x00)
@@ -434,7 +569,7 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_3
 
 typedef struct _CONFIG_PAGE_MANUFACTURING_4
 {
-    fCONFIG_PAGE_HEADER              Header;             /* 00h */
+    CONFIG_PAGE_HEADER              Header;             /* 00h */
     U32                             Reserved1;          /* 04h */
     U8                              InfoOffset0;        /* 08h */
     U8                              InfoSize0;          /* 09h */
@@ -447,10 +582,23 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4
     U32                             ISVolumeSettings;   /* 48h */
     U32                             IMEVolumeSettings;  /* 4Ch */
     U32                             IMVolumeSettings;   /* 50h */
-} fCONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4,
+    U32                             Reserved3;          /* 54h */
+    U32                             Reserved4;          /* 58h */
+    U8                              ISDataScrubRate;    /* 5Ch */
+    U8                              ISResyncRate;       /* 5Dh */
+    U16                             Reserved5;          /* 5Eh */
+    U8                              IMEDataScrubRate;   /* 60h */
+    U8                              IMEResyncRate;      /* 61h */
+    U16                             Reserved6;          /* 62h */
+    U8                              IMDataScrubRate;    /* 64h */
+    U8                              IMResyncRate;       /* 65h */
+    U16                             Reserved7;          /* 66h */
+    U32                             Reserved8;          /* 68h */
+    U32                             Reserved9;          /* 6Ch */
+} CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4,
   ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t;
 
-#define MPI_MANUFACTURING4_PAGEVERSION                  (0x01)
+#define MPI_MANUFACTURING4_PAGEVERSION                  (0x02)
 
 /* defines for the Flags field */
 #define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA                 (0x01)
@@ -458,19 +606,25 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4
 
 typedef struct _CONFIG_PAGE_MANUFACTURING_5
 {
-    fCONFIG_PAGE_HEADER              Header;             /* 00h */
+    CONFIG_PAGE_HEADER              Header;             /* 00h */
     U64                             BaseWWID;           /* 04h */
-} fCONFIG_PAGE_MANUFACTURING_5, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_5,
+    U8                              Flags;              /* 0Ch */
+    U8