[media] adv7511: add new video encoder

This is an Analog Devices HDMI transmitter.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

3 files changed, 1210 insertions, 0 deletions

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 847b7113f70..d18be19c96c 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -429,6 +429,17 @@ config VIDEO_ADV7393
 	  To compile this driver as a module, choose M here: the
 	  module will be called adv7393.
 
+config VIDEO_ADV7511
+	tristate "Analog Devices ADV7511 encoder"
+	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+	---help---
+	  Support for the Analog Devices ADV7511 video encoder.
+
+	  This is a Analog Devices HDMI transmitter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adv7511.
+
 config VIDEO_AD9389B
 	tristate "Analog Devices AD9389B encoder"
 	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index b4cf972703d..9f462df77b4 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_VIDEO_ADV7393) += adv7393.o
 obj-$(CONFIG_VIDEO_ADV7604) += adv7604.o
 obj-$(CONFIG_VIDEO_ADV7842) += adv7842.o
 obj-$(CONFIG_VIDEO_AD9389B) += ad9389b.o
+obj-$(CONFIG_VIDEO_ADV7511) += adv7511.o
 obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o
 obj-$(CONFIG_VIDEO_VS6624)  += vs6624.o
 obj-$(CONFIG_VIDEO_BT819) += bt819.o
diff --git a/drivers/media/i2c/adv7511.c b/drivers/media/i2c/adv7511.c
new file mode 100644
index 00000000000..7a576097471
--- /dev/null
+++ b/drivers/media/i2c/adv7511.c
@@ -0,0 +1,1198 @@
+/*
+ * Analog Devices ADV7511 HDMI Transmitter Device Driver
+ *
+ * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <linux/gpio.h>
+#include <linux/workqueue.h>
+#include <linux/v4l2-dv-timings.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-dv-timings.h>
+#include <media/adv7511.h>
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "debug level (0-2)");
+
+MODULE_DESCRIPTION("Analog Devices ADV7511 HDMI Transmitter Device Driver");
+MODULE_AUTHOR("Hans Verkuil");
+MODULE_LICENSE("GPL");
+
+#define MASK_ADV7511_EDID_RDY_INT   0x04
+#define MASK_ADV7511_MSEN_INT       0x40
+#define MASK_ADV7511_HPD_INT        0x80
+
+#define MASK_ADV7511_HPD_DETECT     0x40
+#define MASK_ADV7511_MSEN_DETECT    0x20
+#define MASK_ADV7511_EDID_RDY       0x10
+
+#define EDID_MAX_RETRIES (8)
+#define EDID_DELAY 250
+#define EDID_MAX_SEGM 8
+
+#define ADV7511_MAX_WIDTH 1920
+#define ADV7511_MAX_HEIGHT 1200
+#define ADV7511_MIN_PIXELCLOCK 20000000
+#define ADV7511_MAX_PIXELCLOCK 225000000
+
+/*
+**********************************************************************
+*
+*  Arrays with configuration parameters for the ADV7511
+*
+**********************************************************************
+*/
+
+struct i2c_reg_value {
+	unsigned char reg;
+	unsigned char value;
+};
+
+struct adv7511_state_edid {
+	/* total number of blocks */
+	u32 blocks;
+	/* Number of segments read */
+	u32 segments;
+	uint8_t data[EDID_MAX_SEGM * 256];
+	/* Number of EDID read retries left */
+	unsigned read_retries;
+	bool complete;
+};
+
+struct adv7511_state {
+	struct adv7511_platform_data pdata;
+	struct v4l2_subdev sd;
+	struct media_pad pad;
+	struct v4l2_ctrl_handler hdl;
+	int chip_revision;
+	uint8_t i2c_edid_addr;
+	uint8_t i2c_cec_addr;
+	/* Is the adv7511 powered on? */
+	bool power_on;
+	/* Did we receive hotplug and rx-sense signals? */
+	bool have_monitor;
+	/* timings from s_dv_timings */
+	struct v4l2_dv_timings dv_timings;
+	/* controls */
+	struct v4l2_ctrl *hdmi_mode_ctrl;
+	struct v4l2_ctrl *hotplug_ctrl;
+	struct v4l2_ctrl *rx_sense_ctrl;
+	struct v4l2_ctrl *have_edid0_ctrl;
+	struct v4l2_ctrl *rgb_quantization_range_ctrl;
+	struct i2c_client *i2c_edid;
+	struct adv7511_state_edid edid;
+	/* Running counter of the number of detected EDIDs (for debugging) */
+	unsigned edid_detect_counter;
+	struct workqueue_struct *work_queue;
+	struct delayed_work edid_handler; /* work entry */
+};
+
+static void adv7511_check_monitor_present_status(struct v4l2_subdev *sd);
+static bool adv7511_check_edid_status(struct v4l2_subdev *sd);
+static void adv7511_setup(struct v4l2_subdev *sd);
+static int adv7511_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq);
+static int adv7511_s_clock_freq(struct v4l2_subdev *sd, u32 freq);
+
+
+static const struct v4l2_dv_timings_cap adv7511_timings_cap = {
+	.type = V4L2_DV_BT_656_1120,
+	.bt = {
+		.max_width = ADV7511_MAX_WIDTH,
+		.max_height = ADV7511_MAX_HEIGHT,
+		.min_pixelclock = ADV7511_MIN_PIXELCLOCK,
+		.max_pixelclock = ADV7511_MAX_PIXELCLOCK,
+		.standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
+			V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
+		.capabilities = V4L2_DV_BT_CAP_PROGRESSIVE |
+			V4L2_DV_BT_CAP_REDUCED_BLANKING | V4L2_DV_BT_CAP_CUSTOM,
+	},
+};
+
+static inline struct adv7511_state *get_adv7511_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct adv7511_state, sd);
+}
+
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+	return &container_of(ctrl->handler, struct adv7511_state, hdl)->sd;
+}
+
+/* ------------------------ I2C ----------------------------------------------- */
+
+static s32 adv_smbus_read_byte_data_check(struct i2c_client *client,
+					  u8 command, bool check)
+{
+	union i2c_smbus_data data;
+
+	if (!i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			    I2C_SMBUS_READ, command,
+			    I2C_SMBUS_BYTE_DATA, &data))
+		return data.byte;
+	if (check)
+		v4l_err(client, "error reading %02x, %02x\n",
+			client->addr, command);
+	return -1;
+}
+
+static s32 adv_smbus_read_byte_data(struct i2c_client *client, u8 command)
+{
+	int i;
+	for (i = 0; i < 3; i++) {
+		int ret = adv_smbus_read_byte_data_check(client, command, true);
+		if (ret >= 0) {
+			if (i)
+				v4l_err(client, "read ok after %d retries\n", i);
+			return ret;
+		}
+	}
+	v4l_err(client, "read failed\n");
+	return -1;
+}
+
+static int adv7511_rd(struct v4l2_subdev *sd, u8 reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	return adv_smbus_read_byte_data(client, reg);
+}
+
+static int adv7511_wr(struct v4l2_subdev *sd, u8 reg, u8 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret;
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		ret = i2c_smbus_write_byte_data(client, reg, val);
+		if (ret == 0)
+			return 0;
+	}
+	v4l2_err(sd, "%s: i2c write error\n", __func__);
+	return ret;
+}
+
+/* To set specific bits in the register, a clear-mask is given (to be AND-ed),
+   and then the value-mask (to be OR-ed). */
+static inline void adv7511_wr_and_or(struct v4l2_subdev *sd, u8 reg, uint8_t clr_mask, uint8_t val_mask)
+{
+	adv7511_wr(sd, reg, (adv7511_rd(sd, reg) & clr_mask) | val_mask);
+}
+
+static int adv_smbus_read_i2c_block_data(struct i2c_client *client,
+					 u8 command, unsigned length, u8 *values)
+{
+	union i2c_smbus_data data;
+	int ret;
+
+	if (length > I2C_SMBUS_BLOCK_MAX)
+		length = I2C_SMBUS_BLOCK_MAX;
+	data.block[0] = length;
+
+	ret = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			     I2C_SMBUS_READ, command,
+			     I2C_SMBUS_I2C_BLOCK_DATA, &data);
+	memcpy(values, data.block + 1, length);
+	return ret;
+}
+
+static inline void adv7511_edid_rd(struct v4l2_subdev *sd, uint16_t len, uint8_t *buf)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+	int i;
+	int err = 0;
+
+	v4l2_dbg(1, debug, sd, "%s:\n", __func__);
+
+	for (i = 0; !err && i < len; i += I2C_SMBUS_BLOCK_MAX)
+		err = adv_smbus_read_i2c_block_data(state->i2c_edid, i,
+						    I2C_SMBUS_BLOCK_MAX, buf + i);
+	if (err)
+		v4l2_err(sd, "%s: i2c read error\n", __func__);
+}
+
+static inline bool adv7511_have_hotplug(struct v4l2_subdev *sd)
+{
+	return adv7511_rd(sd, 0x42) & MASK_ADV7511_HPD_DETECT;
+}
+
+static inline bool adv7511_have_rx_sense(struct v4l2_subdev *sd)
+{
+	return adv7511_rd(sd, 0x42) & MASK_ADV7511_MSEN_DETECT;
+}
+
+static void adv7511_csc_conversion_mode(struct v4l2_subdev *sd, uint8_t mode)
+{
+	adv7511_wr_and_or(sd, 0x18, 0x9f, (mode & 0x3)<<5);
+}
+
+static void adv7511_csc_coeff(struct v4l2_subdev *sd,
+			      u16 A1, u16 A2, u16 A3, u16 A4,
+			      u16 B1, u16 B2, u16 B3, u16 B4,
+			      u16 C1, u16 C2, u16 C3, u16 C4)
+{
+	/* A */
+	adv7511_wr_and_or(sd, 0x18, 0xe0, A1>>8);
+	adv7511_wr(sd, 0x19, A1);
+	adv7511_wr_and_or(sd, 0x1A, 0xe0, A2>>8);
+	adv7511_wr(sd, 0x1B, A2);
+	adv7511_wr_and_or(sd, 0x1c, 0xe0, A3>>8);
+	adv7511_wr(sd, 0x1d, A3);
+	adv7511_wr_and_or(sd, 0x1e, 0xe0, A4>>8);
+	adv7511_wr(sd, 0x1f, A4);
+
+	/* B */
+	adv7511_wr_and_or(sd, 0x20, 0xe0, B1>>8);
+	adv7511_wr(sd, 0x21, B1);
+	adv7511_wr_and_or(sd, 0x22, 0xe0, B2>>8);
+	adv7511_wr(sd, 0x23, B2);
+	adv7511_wr_and_or(sd, 0x24, 0xe0, B3>>8);
+	adv7511_wr(sd, 0x25, B3);
+	adv7511_wr_and_or(sd, 0x26, 0xe0, B4>>8);
+	adv7511_wr(sd, 0x27, B4);
+
+	/* C */
+	adv7511_wr_and_or(sd, 0x28, 0xe0, C1>>8);
+	adv7511_wr(sd, 0x29, C1);
+	adv7511_wr_and_or(sd, 0x2A, 0xe0, C2>>8);
+	adv7511_wr(sd, 0x2B, C2);
+	adv7511_wr_and_or(sd, 0x2C, 0xe0, C3>>8);
+	adv7511_wr(sd, 0x2D, C3);
+	adv7511_wr_and_or(sd, 0x2E, 0xe0, C4>>8);
+	adv7511_wr(sd, 0x2F, C4);
+}
+
+static void adv7511_csc_rgb_full2limit(struct v4l2_subdev *sd, bool enable)
+{
+	if (enable) {
+		uint8_t csc_mode = 0;
+		adv7511_csc_conversion_mode(sd, csc_mode);
+		adv7511_csc_coeff(sd,
+				  4096-564, 0, 0, 256,
+				  0, 4096-564, 0, 256,
+				  0, 0, 4096-564, 256);
+		/* enable CSC */
+		adv7511_wr_and_or(sd, 0x18, 0x7f, 0x80);
+		/* AVI infoframe: Limited range RGB (16-235) */
+		adv7511_wr_and_or(sd, 0x57, 0xf3, 0x04);
+	} else {
+		/* disable CSC */
+		adv7511_wr_and_or(sd, 0x18, 0x7f, 0x0);
+		/* AVI infoframe: Full range RGB (0-255) */
+		adv7511_wr_and_or(sd, 0x57, 0xf3, 0x08);
+	}
+}
+
+static void adv7511_set_IT_content_AVI_InfoFrame(struct v4l2_subdev *sd)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+	if (state->dv_timings.bt.standards & V4L2_DV_BT_STD_CEA861) {
+		/* CEA format, not IT  */
+		adv7511_wr_and_or(sd, 0x57, 0x7f, 0x00);
+	} else {
+		/* IT format */
+		adv7511_wr_and_or(sd, 0x57, 0x7f, 0x80);
+	}
+}
+
+static int adv7511_set_rgb_quantization_mode(struct v4l2_subdev *sd, struct v4l2_ctrl *ctrl)
+{
+	switch (ctrl->val) {
+	default:
+		return -EINVAL;
+		break;
+	case V4L2_DV_RGB_RANGE_AUTO: {
+		/* automatic */
+		struct adv7511_state *state = get_adv7511_state(sd);
+
+		if (state->dv_timings.bt.standards & V4L2_DV_BT_STD_CEA861) {
+			/* cea format, RGB limited range (16-235) */
+			adv7511_csc_rgb_full2limit(sd, true);
+		} else {
+			/* not cea format, RGB full range (0-255) */
+			adv7511_csc_rgb_full2limit(sd, false);
+		}
+	}
+		break;
+	case V4L2_DV_RGB_RANGE_LIMITED:
+		/* RGB limited range (16-235) */
+		adv7511_csc_rgb_full2limit(sd, true);
+		break;
+	case V4L2_DV_RGB_RANGE_FULL:
+		/* RGB full range (0-255) */
+		adv7511_csc_rgb_full2limit(sd, false);
+		break;
+	}
+	return 0;
+}
+
+/* ------------------------------ CTRL OPS ------------------------------ */
+
+static int adv7511_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct v4l2_subdev *sd = to_sd(ctrl);
+	struct adv7511_state *state = get_adv7511_state(sd);
+
+	v4l2_dbg(1, debug, sd, "%s: ctrl id: %d, ctrl->val %d\n", __func__, ctrl->id, ctrl->val);
+
+	if (state->hdmi_mode_ctrl == ctrl) {
+		/* Set HDMI or DVI-D */
+		adv7511_wr_and_or(sd, 0xaf, 0xfd, ctrl->val == V4L2_DV_TX_MODE_HDMI ? 0x02 : 0x00);
+		return 0;
+	}
+	if (state->rgb_quantization_range_ctrl == ctrl)
+		return adv7511_set_rgb_quantization_mode(sd, ctrl);
+
+	return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops adv7511_ctrl_ops = {
+	.s_ctrl = adv7511_s_ctrl,
+};
+
+/* ---------------------------- CORE OPS ------------------------------------------- */
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static void adv7511_inv_register(struct v4l2_subdev *sd)
+{
+	v4l2_info(sd, "0x000-0x0ff: Main Map\n");
+}
+
+static int adv7511_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
+{
+	reg->size = 1;
+	switch (reg->reg >> 8) {
+	case 0:
+		reg->val = adv7511_rd(sd, reg->reg & 0xff);
+		break;
+	default:
+		v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
+		adv7511_inv_register(sd);
+		break;
+	}
+	return 0;
+}
+
+static int adv7511_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
+{
+	switch (reg->reg >> 8) {
+	case 0:
+		adv7511_wr(sd, reg->reg & 0xff, reg->val & 0xff);
+		break;
+	default:
+		v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
+		adv7511_inv_register(sd);
+		break;
+	}
+	return 0;
+}
+#endif
+
+static int adv7511_log_status(struct v4l2_subdev *sd)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+	struct adv7511_state_edid *edid = &state->edid;
+
+	static const char * const states[] = {
+		"in reset",
+		"reading EDID",
+		"idle",
+		"initializing HDCP",
+		"HDCP enabled",
+		"initializing HDCP repeater",
+		"6", "7", "8", "9", "A", "B", "C", "D", "E", "F"
+	};
+	static const char * const errors[] = {
+		"no error",
+		"bad receiver BKSV",
+		"Ri mismatch",
+		"Pj mismatch",
+		"i2c error",
+		"timed out",
+		"max repeater cascade exceeded",
+		"hash check failed",
+		"too many devices",
+		"9", "A", "B", "C", "D", "E", "F"
+	};
+
+	v4l2_info(sd, "power %s\n", state->power_on ? "on" : "off");
+	v4l2_info(sd, "%s hotplug, %s Rx Sense, %s EDID (%d block(s))\n",
+		  (adv7511_rd(sd, 0x42) & MASK_ADV7511_HPD_DETECT) ? "detected" : "no",
+		  (adv7511_rd(sd, 0x42) & MASK_ADV7511_MSEN_DETECT) ? "detected" : "no",
+		  edid->segments ? "found" : "no",
+		  edid->blocks);
+	v4l2_info(sd, "%s output %s\n",
+		  (adv7511_rd(sd, 0xaf) & 0x02) ?
+		  "HDMI" : "DVI-D",
+		  (adv7511_rd(sd, 0xa1) & 0x3c) ?
+		  "disabled" : "enabled");
+	v4l2_info(sd, "state: %s, error: %s, detect count: %u, msk/irq: %02x/%02x\n",
+			  states[adv7511_rd(sd, 0xc8) & 0xf],
+			  errors[adv7511_rd(sd, 0xc8) >> 4], state->edid_detect_counter,
+			  adv7511_rd(sd, 0x94), adv7511_rd(sd, 0x96));
+	v4l2_info(sd, "RGB quantization: %s range\n", adv7511_rd(sd, 0x18) & 0x80 ? "limited" : "full");
+	if (state->dv_timings.type == V4L2_DV_BT_656_1120)
+		v4l2_print_dv_timings(sd->name, "timings: ",
+				&state->dv_timings, false);
+	else
+		v4l2_info(sd, "no timings set\n");
+	v4l2_info(sd, "i2c edid addr: 0x%x\n", state->i2c_edid_addr);
+	v4l2_info(sd, "i2c cec addr: 0x%x\n", state->i2c_cec_addr);
+	return 0;
+}
+
+/* Power up/down adv7511 */
+static int adv7511_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+	const int retries = 20;
+	int i;
+
+	v4l2_dbg(1, debug, sd, "%s: power %s\n", __func__, on ? "on" : "off");
+
+	state->power_on = on;
+
+	if (!on) {
+		/* Power down */
+		adv7511_wr_and_or(sd, 0x41, 0xbf, 0x40);
+		return true;
+	}
+
+	/* Power up */
+	/* The adv7511 does not always come up immediately.
+	   Retry multiple times. */
+	for (i = 0; i < retries; i++) {
+		adv7511_wr_and_or(sd, 0x41, 0xbf, 0x0);
+		if ((adv7511_rd(sd, 0x41) & 0x40) == 0)
+			break;
+		adv7511_wr_and_or(sd, 0x41, 0xbf, 0x40);
+		msleep(10);
+	}
+	if (i == retries) {
+		v4l2_dbg(1, debug, sd, "%s: failed to powerup the adv7511!\n", __func__);
+		adv7511_s_power(sd, 0);
+		return false;
+	}
+	if (i > 1)
+		v4l2_dbg(1, debug, sd, "%s: needed %d retries to powerup the adv7511\n", __func__, i);
+
+	/* Reserved registers that must be set */
+	adv7511_wr(sd, 0x98, 0x03);
+	adv7511_wr_and_or(sd, 0x9a, 0xfe, 0x70);
+	adv7511_wr(sd, 0x9c, 0x30);
+	adv7511_wr_and_or(sd, 0x9d, 0xfc, 0x01);
+	adv7511_wr(sd, 0xa2, 0xa4);
+	adv7511_wr(sd, 0xa3, 0xa4);
+	adv7511_wr(sd, 0xe0, 0xd0);
+	adv7511_wr(sd, 0xf9, 0x00);
+
+	adv7511_wr(sd, 0x43, state->i2c_edid_addr);
+
+	/* Set number of attempts to read the EDID */
+	adv7511_wr(sd, 0xc9, 0xf);
+	return true;
+}
+
+/* Enable interrupts */
+static void adv7511_set_isr(struct v4l2_subdev *sd, bool enable)
+{
+	uint8_t irqs = MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT;
+	uint8_t irqs_rd;
+	int retries = 100;
+
+	v4l2_dbg(2, debug, sd, "%s: %s\n", __func__, enable ? "enable" : "disable");
+
+	/* The datasheet says that the EDID ready interrupt should be
+	   disabled if there is no hotplug. */
+	if (!enable)
+		irqs = 0;
+	else if (adv7511_have_hotplug(sd))
+		irqs |= MASK_ADV7511_EDID_RDY_INT;
+
+	/*
+	 * This i2c write can fail (approx. 1 in 1000 writes). But it
+	 * is essential that this register is correct, so retry it
+	 * multiple times.
+	 *
+	 * Note that the i2c write does not report an error, but the readback
+	 * clearly shows the wrong value.
+	 */
+	do {
+		adv7511_wr(sd, 0x94, irqs);
+		irqs_rd = adv7511_rd(sd, 0x94);
+	} while (retries-- && irqs_rd != irqs);
+
+	if (irqs_rd == irqs)
+		return;
+	v4l2_err(sd, "Could not set interrupts: hw failure?\n");
+}
+
+/* Interrupt handler */
+static int adv7511_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
+{
+	uint8_t irq_status;
+
+	/* disable interrupts to prevent a race condition */
+	adv7511_set_isr(sd, false);
+	irq_status = adv7511_rd(sd, 0x96);
+	/* clear detected interrupts */
+	adv7511_wr(sd, 0x96, irq_status);
+
+	v4l2_dbg(1, debug, sd, "%s: irq 0x%x\n", __func__, irq_status);
+
+	if (irq_status & (MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT))
+		adv7511_check_monitor_present_status(sd);
+	if (irq_status & MASK_ADV7511_EDID_RDY_INT)
+		adv7511_check_edid_status(sd);
+
+	/* enable interrupts */
+	adv7511_set_isr(sd, true);
+
+	if (handled)
+		*handled = true;
+	return 0;
+}
+
+static int adv7511_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+
+	if (edid->pad != 0)
+		return -EINVAL;
+	if ((edid->blocks == 0) || (edid->blocks > 256))
+		return -EINVAL;
+	if (!edid->edid)
+		return -EINVAL;
+	if (!state->edid.segments) {
+		v4l2_dbg(1, debug, sd, "EDID segment 0 not found\n");
+		return -ENODATA;
+	}
+	if (edid->start_block >= state->edid.segments * 2)
+		return -E2BIG;
+	if ((edid->blocks + edid->start_block) >= state->edid.segments * 2)
+		edid->blocks = state->edid.segments * 2 - edid->start_block;
+
+	memcpy(edid->edid, &state->edid.data[edid->start_block * 128],
+			128 * edid->blocks);
+	return 0;
+}
+
+static const struct v4l2_subdev_pad_ops adv7511_pad_ops = {
+	.get_edid = adv7511_get_edid,
+};
+
+static const struct v4l2_subdev_core_ops adv7511_core_ops = {
+	.log_status = adv7511_log_status,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register = adv7511_g_register,
+	.s_register = adv7511_s_register,
+#endif
+	.s_power = adv7511_s_power,
+	.interrupt_service_routine = adv7511_isr,
+};
+
+/* ------------------------------ VIDEO OPS ------------------------------ */
+
+/* Enable/disable adv7511 output */
+static int adv7511_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+
+	v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis"));
+	adv7511_wr_and_or(sd, 0xa1, ~0x3c, (enable ? 0 : 0x3c));
+	if (enable) {
+		adv7511_check_monitor_present_status(sd);
+	} else {
+		adv7511_s_power(sd, 0);
+		state->have_monitor = false;
+	}
+	return 0;
+}
+
+static int adv7511_s_dv_timings(struct v4l2_subdev *sd,
+			       struct v4l2_dv_timings *timings)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+
+	v4l2_dbg(1, debug, sd, "%s:\n", __func__);
+
+	/* quick sanity check */
+	if (!v4l2_valid_dv_timings(timings, &adv7511_timings_cap, NULL, NULL))
+		return -EINVAL;
+
+	/* Fill the optional fields .standards and .flags in struct v4l2_dv_timings
+	   if the format is one of the CEA or DMT timings. */
+	v4l2_find_dv_timings_cap(timings, &adv7511_timings_cap, 0, NULL, NULL);
+
+	timings->bt.flags &= ~V4L2_DV_FL_REDUCED_FPS;
+
+	/* save timings */
+	state->dv_timings = *timings;
+
+	/* update quantization range based on new dv_timings */
+	adv7511_set_rgb_quantization_mode(sd, state->rgb_quantization_range_ctrl);
+
+	/* update AVI infoframe */
+	adv7511_set_IT_content_AVI_InfoFrame(sd);
+
+	return 0;
+}
+
+static int adv7511_g_dv_timings(struct v4l2_subdev *sd,
+				struct v4l2_dv_timings *timings)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+
+	v4l2_dbg(1, debug, sd, "%s:\n", __func__);
+
+	if (!timings)
+		return -EINVAL;
+
+	*timings = state->dv_timings;
+
+	return 0;
+}
+
+static int adv7511_enum_dv_timings(struct v4l2_subdev *sd,
+				   struct v4l2_enum_dv_timings *timings)
+{
+	return v4l2_enum_dv_timings_cap(timings, &adv7511_timings_cap, NULL, NULL);
+}
+
+static int adv7511_dv_timings_cap(struct v4l2_subdev *sd,
+				  struct v4l2_dv_timings_cap *cap)
+{
+	*cap = adv7511_timings_cap;
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops adv7511_video_ops = {
+	.s_stream = adv7511_s_stream,
+	.s_dv_timings = adv7511_s_dv_timings,
+	.g_dv_timings = adv7511_g_dv_timings,
+	.enum_dv_timings = adv7511_enum_dv_timings,
+	.dv_timings_cap = adv7511_dv_timings_cap,
+};
+
+/* ------------------------------ AUDIO OPS ------------------------------ */
+static int adv7511_s_audio_stream(struct v4l2_subdev *sd, int enable)
+{
+	v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis"));
+
+	if (enable)
+		adv7511_wr_and_or(sd, 0x4b, 0x3f, 0x80);
+	else
+		adv7511_wr_and_or(sd, 0x4b, 0x3f, 0x40);
+
+	return 0;
+}
+
+static int adv7511_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
+{
+	u32 N;
+
+	switch (freq) {
+	case 32000:  N = 4096;  break;
+	case 44100:  N = 6272;  break;
+	case 48000:  N = 6144;  break;
+	case 88200:  N = 12544; break;
+	case 96000:  N = 12288; break;
+	case 176400: N = 25088; break;
+	case 192000: N = 24576; break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Set N (used with CTS to regenerate the audio clock) */
+	adv7511_wr(sd, 0x01, (N >> 16) & 0xf);
+	adv7511_wr(sd, 0x02, (N >> 8) & 0xff);
+	adv7511_wr(sd, 0x03, N & 0xff);
+
+	return 0;
+}
+
+static int adv7511_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq)
+{
+	u32 i2s_sf;
+
+	switch (freq) {
+	case 32000:  i2s_sf = 0x30; break;
+	case 44100:  i2s_sf = 0x00; break;
+	case 48000:  i2s_sf = 0x20; break;
+	case 88200:  i2s_sf = 0x80; break;
+	case 96000:  i2s_sf = 0xa0; break;
+	case 176400: i2s_sf = 0xc0; break;
+	case 192000: i2s_sf = 0xe0; break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Set sampling frequency for I2S audio to 48 kHz */
+	adv7511_wr_and_or(sd, 0x15, 0xf, i2s_sf);
+
+	return 0;
+}
+
+static int adv7511_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config)
+{
+	/* Only 2 channels in use for application */
+	adv7511_wr_and_or(sd, 0x73, 0xf8, 0x1);
+	/* Speaker mapping */
+	adv7511_wr(sd, 0x76, 0x00);
+
+	/* 16 bit audio word length */
+	adv7511_wr_and_or(sd, 0x14, 0xf0, 0x02);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_audio_ops adv7511_audio_ops = {
+	.s_stream = adv7511_s_audio_stream,
+	.s_clock_freq = adv7511_s_clock_freq,
+	.s_i2s_clock_freq = adv7511_s_i2s_clock_freq,
+	.s_routing = adv7511_s_routing,
+};
+
+/* --------------------- SUBDEV OPS --------------------------------------- */
+
+static const struct v4l2_subdev_ops adv7511_ops = {
+	.core  = &adv7511_core_ops,
+	.pad  = &adv7511_pad_ops,
+	.video = &adv7511_video_ops,
+	.audio = &adv7511_audio_ops,
+};
+
+/* ----------------------------------------------------------------------- */
+static void adv7511_dbg_dump_edid(int lvl, int debug, struct v4l2_subdev *sd, int segment, uint8_t *buf)
+{
+	if (debug >= lvl) {
+		int i, j;
+		v4l2_dbg(lvl, debug, sd, "edid segment %d\n", segment);
+		for (i = 0; i < 256; i += 16) {
+			u8 b[128];
+			u8 *bp = b;
+			if (i == 128)
+				v4l2_dbg(lvl, debug, sd, "\n");
+			for (j = i; j < i + 16; j++) {
+				sprintf(bp, "0x%02x, ", buf[j]);
+				bp += 6;
+			}
+			bp[0] = '\0';
+			v4l2_dbg(lvl, debug, sd, "%s\n", b);
+		}
+	}
+}
+
+static void adv7511_edid_handler(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct adv7511_state *state = container_of(dwork, struct adv7511_state, edid_handler);
+	struct v4l2_subdev *sd = &state->sd;
+	struct adv7511_edid_detect ed;
+
+	v4l2_dbg(1, debug, sd, "%s:\n", __func__);
+
+	if (adv7511_check_edid_status(sd)) {
+		/* Return if we received the EDID. */
+		return;
+	}
+
+	if (adv7511_have_hotplug(sd)) {
+		/* We must retry reading the EDID several times, it is possible
+		 * that initially the EDID couldn't be read due to i2c errors
+		 * (DVI connectors are particularly prone to this problem). */
+		if (state->edid.read_retries) {
+			state->edid.read_retries--;
+			v4l2_dbg(1, debug, sd, "%s: edid read failed\n", __func__);
+			state->have_monitor = false;
+			adv7511_s_power(sd, false);
+			adv7511_s_power(sd, true);
+			queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY);
+			return;
+		}
+	}
+
+	/* We failed to read the EDID, so send an event for this. */
+	ed.present = false;
+	ed.segment = adv7511_rd(sd, 0xc4);
+	v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
+	v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__);
+}
+
+static void adv7511_audio_setup(struct v4l2_subdev *sd)
+{
+	v4l2_dbg(1, debug, sd, "%s\n", __func__);
+
+	adv7511_s_i2s_clock_freq(sd, 48000);
+	adv7511_s_clock_freq(sd, 48000);
+	adv7511_s_routing(sd, 0, 0, 0);
+}
+
+/* Configure hdmi transmitter. */
+static void adv7511_setup(struct v4l2_subdev *sd)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+	v4l2_dbg(1, debug, sd, "%s\n", __func__);
+
+	/* Input format: RGB 4:4:4 */
+	adv7511_wr_and_or(sd, 0x15, 0xf0, 0x0);
+	/* Output format: RGB 4:4:4 */
+	adv7511_wr_and_or(sd, 0x16, 0x7f, 0x0);
+	/* 1st order interpolation 4:2:2 -> 4:4:4 up conversion, Aspect ratio: 16:9 */
+	adv7511_wr_and_or(sd, 0x17, 0xf9, 0x06);
+	/* Disable pixel repetition */
+	adv7511_wr_and_or(sd, 0x3b, 0x9f, 0x0);
+	/* Disable CSC */
+	adv7511_wr_and_or(sd, 0x18, 0x7f, 0x0);
+	/* Output format: RGB 4:4:4, Active Format Information is valid,
+	 * underscanned */
+	adv7511_wr_and_or(sd, 0x55, 0x9c, 0x12);
+	/* AVI Info frame packet enable, Audio Info frame disable */
+	adv7511_wr_and_or(sd, 0x44, 0xe7, 0x10);
+	/* Colorimetry, Active format aspect ratio: same as picure. */
+	adv7511_wr(sd, 0x56, 0xa8);
+	/* No encryption */
+	adv7511_wr_and_or(sd, 0xaf, 0xed, 0x0);
+
+	/* Positive clk edge capture for input video clock */
+	adv7511_wr_and_or(sd, 0xba, 0x1f, 0x60);
+
+	adv7511_audio_setup(sd);
+
+	v4l2_ctrl_handler_setup(&state->hdl);
+}
+
+static void adv7511_notify_monitor_detect(struct v4l2_subdev *sd)
+{
+	struct adv7511_monitor_detect mdt;
+	struct adv7511_state *state = get_adv7511_state(sd);
+
+	mdt.present = state->have_monitor;
+	v4l2_subdev_notify(sd, ADV7511_MONITOR_DETECT, (void *)&mdt);
+}
+
+static void adv7511_check_monitor_present_status(struct v4l2_subdev *sd)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+	/* read hotplug and rx-sense state */
+	uint8_t status = adv7511_rd(sd, 0x42);
+
+	v4l2_dbg(1, debug, sd, "%s: status: 0x%x%s%s\n",
+			 __func__,
+			 status,
+			 status & MASK_ADV7511_HPD_DETECT ? ", hotplug" : "",
+			 status & MASK_ADV7511_MSEN_DETECT ? ", rx-sense" : "");
+
+	/* update read only ctrls */
+	v4l2_ctrl_s_ctrl(state->hotplug_ctrl, adv7511_have_hotplug(sd) ? 0x1 : 0x0);
+	v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, adv7511_have_rx_sense(sd) ? 0x1 : 0x0);
+	v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0);
+
+	if ((status & MASK_ADV7511_HPD_DETECT) && ((status & MASK_ADV7511_MSEN_DETECT) || state->edid.segments)) {
+		v4l2_dbg(1, debug, sd, "%s: hotplug and (rx-sense or edid)\n", __func__);
+		if (!state->have_monitor) {
+			v4l2_dbg(1, debug, sd, "%s: monitor detected\n", __func__);
+			state->have_monitor = true;
+			adv7511_set_isr(sd, true);
+			if (!adv7511_s_power(sd, true)) {
+				v4l2_dbg(1, debug, sd, "%s: monitor detected, powerup failed\n", __func__);
+				return;
+			}
+			adv7511_setup(sd);
+			adv7511_notify_monitor_detect(sd);
+			state->edid.read_retries = EDID_MAX_RETRIES;
+			queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY);
+		}
+	} else if (status & MASK_ADV7511_HPD_DETECT) {
+		v4l2_dbg(1, debug, sd, "%s: hotplug detected\n", __func__);
+		state->edid.read_retries = EDID_MAX_RETRIES;
+		queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY);
+	} else if (!(status & MASK_ADV7511_HPD_DETECT)) {
+		v4l2_dbg(1, debug, sd, "%s: hotplug not detected\n", __func__);
+		if (state->have_monitor) {
+			v4l2_dbg(1, debug, sd, "%s: monitor not detected\n", __func__);
+			state->have_monitor = false;
+			adv7511_notify_monitor_detect(sd);
+		}
+		adv7511_s_power(sd, false);
+		memset(&state->edid, 0, sizeof(struct adv7511_state_edid));
+	}
+}
+
+static bool edid_block_verify_crc(uint8_t *edid_block)
+{
+	int i;
+	uint8_t sum = 0;
+
+	for (i = 0; i < 128; i++)
+		sum += *(edid_block + i);
+	return (sum == 0);
+}
+
+static bool edid_segment_verify_crc(struct v4l2_subdev *sd, u32 segment)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+	u32 blocks = state->edid.blocks;
+	uint8_t *data = state->edid.data;
+
+	if (edid_block_verify_crc(&data[segment * 256])) {
+		if ((segment + 1) * 2 <= blocks)
+			return edid_block_verify_crc(&data[segment * 256 + 128]);
+		return true;
+	}
+	return false;
+}
+
+static bool adv7511_check_edid_status(struct v4l2_subdev *sd)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+	uint8_t edidRdy = adv7511_rd(sd, 0xc5);
+
+	v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n",
+			 __func__, EDID_MAX_RETRIES - state->edid.read_retries);
+
+	if (state->edid.complete)
+		return true;
+
+	if (edidRdy & MASK_ADV7511_EDID_RDY) {
+		int segment = adv7511_rd(sd, 0xc4);
+		struct adv7511_edid_detect ed;
+
+		if (segment >= EDID_MAX_SEGM) {
+			v4l2_err(sd, "edid segment number too big\n");
+			return false;
+		}
+		v4l2_dbg(1, debug, sd, "%s: got segment %d\n", __func__, segment);
+		adv7511_edid_rd(sd, 256, &state->edid.data[segment * 256]);
+		adv7511_dbg_dump_edid(2, debug, sd, segment, &state->edid.data[segment * 256]);
+		if (segment == 0) {
+			state->edid.blocks = state->edid.data[0x7e] + 1;
+			v4l2_dbg(1, debug, sd, "%s: %d blocks in total\n", __func__, state->edid.blocks);
+		}
+		if (!edid_segment_verify_crc(sd, segment)) {
+			/* edid crc error, force reread of edid segment */
+			v4l2_dbg(1, debug, sd, "%s: edid crc error\n", __func__);
+			state->have_monitor = false;
+			adv7511_s_power(sd, false);
+			adv7511_s_power(sd, true);
+			return false;
+		}
+		/* one more segment read ok */
+		state->edid.segments = segment + 1;
+		if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) {
+			/* Request next EDID segment */
+			v4l2_dbg(1, debug, sd, "%s: request segment %d\n", __func__, state->edid.segments);
+			adv7511_wr(sd, 0xc9, 0xf);
+			adv7511_wr(sd, 0xc4, state->edid.segments);
+			state->edid.read_retries = EDID_MAX_RETRIES;
+			queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY);
+			return false;
+		}
+
+		v4l2_dbg(1, debug, sd, "%s: edid complete with %d segment(s)\n", __func__, state->edid.segments);
+		state->edid.complete = true;
+
+		/* report when we have all segments
+		   but report only for segment 0
+		 */
+		ed.present = true;
+		ed.segment = 0;
+		state->edid_detect_counter++;
+		v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0);
+		v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
+		return ed.present;
+	}
+
+	return false;
+}
+
+/* ----------------------------------------------------------------------- */
+/* Setup ADV7511 */
+static void adv7511_init_setup(struct v4l2_subdev *sd)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+	struct adv7511_state_edid *edid = &state->edid;
+
+	v4l2_dbg(1, debug, sd, "%s\n", __func__);
+
+	/* clear all interrupts */
+	adv7511_wr(sd, 0x96, 0xff);
+	memset(edid, 0, sizeof(struct adv7511_state_edid));
+	state->have_monitor = false;
+	adv7511_set_isr(sd, false);
+	adv7511_s_stream(sd, false);
+	adv7511_s_audio_stream(sd, false);
+}
+
+static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct adv7511_state *state;
+	struct adv7511_platform_data *pdata = client->dev.platform_data;
+	struct v4l2_ctrl_handler *hdl;
+	struct v4l2_subdev *sd;
+	u8 chip_id[2];
+	int err = -EIO;
+
+	/* Check if the adapter supports the needed features */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	state = devm_kzalloc(&client->dev, sizeof(struct adv7511_state), GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	/* Platform data */
+	if (!pdata) {
+		v4l_err(client, "No platform data!\n");
+		return -ENODEV;
+	}
+	memcpy(&state->pdata, pdata, sizeof(state->pdata));
+
+	sd = &state->sd;
+
+	v4l2_dbg(1, debug, sd, "detecting adv7511 client on address 0x%x\n",
+			 client->addr << 1);
+
+	v4l2_i2c_subdev_init(sd, client, &adv7511_ops);
+
+	hdl = &state->hdl;
+	v4l2_ctrl_handler_init(hdl, 10);
+	/* add in ascending ID order */
+	state->hdmi_mode_ctrl = v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops,
+			V4L2_CID_DV_TX_MODE, V4L2_DV_TX_MODE_HDMI,
+			0, V4L2_DV_TX_MODE_DVI_D);
+	state->hotplug_ctrl = v4l2_ctrl_new_std(hdl, NULL,
+			V4L2_CID_DV_TX_HOTPLUG, 0, 1, 0, 0);
+	state->rx_sense_ctrl = v4l2_ctrl_new_std(hdl, NULL,
+			V4L2_CID_DV_TX_RXSENSE, 0, 1, 0, 0);
+	state->have_edid0_ctrl = v4l2_ctrl_new_std(hdl, NULL,
+			V4L2_CID_DV_TX_EDID_PRESENT, 0, 1, 0, 0);
+	state->rgb_quantization_range_ctrl =
+		v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops,
+			V4L2_CID_DV_TX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL,
+			0, V4L2_DV_RGB_RANGE_AUTO);
+	sd->ctrl_handler = hdl;
+	if (hdl->error) {
+		err = hdl->error;
+		goto err_hdl;
+	}
+	state->hdmi_mode_ctrl->is_private = true;
+	state->hotplug_ctrl->is_private = true;
+	state->rx_sense_ctrl->is_private = true;
+	state->have_edid0_ctrl->is_private = true;
+	state->rgb_quantization_range_ctrl->is_private = true;
+
+	state->pad.flags = MEDIA_PAD_FL_SINK;
+	err = media_entity_init(&sd->entity, 1, &state->pad, 0);
+	if (err)
+		goto err_hdl;
+
+	/* EDID and CEC i2c addr */
+	state->i2c_edid_addr = state->pdata.i2c_edid << 1;
+	state->i2c_cec_addr = state->pdata.i2c_cec << 1;
+
+	state->chip_revision = adv7511_rd(sd, 0x0);
+	chip_id[0] = adv7511_rd(sd, 0xf5);
+	chip_id[1] = adv7511_rd(sd, 0xf6);
+	if (chip_id[0] != 0x75 || chip_id[1] != 0x11) {
+		v4l2_err(sd, "chip_id != 0x7511, read 0x%02x%02x\n", chip_id[0], chip_id[1]);
+		err = -EIO;
+		goto err_entity;
+	}
+
+	state->i2c_edid = i2c_new_dummy(client->adapter, state->i2c_edid_addr >> 1);
+	if (state->i2c_edid == NULL) {
+		v4l2_err(sd, "failed to register edid i2c client\n");
+		goto err_entity;
+	}
+
+	adv7511_wr(sd, 0xe2, 0x01); /* power down cec section */
+	state->work_queue = create_singlethread_workqueue(sd->name);
+	if (state->work_queue == NULL) {
+		v4l2_err(sd, "could not create workqueue\n");
+		goto err_unreg_cec;
+	}
+
+	INIT_DELAYED_WORK(&state->edid_handler, adv7511_edid_handler);
+
+	adv7511_init_setup(sd);
+	adv7511_set_isr(sd, true);
+	adv7511_check_monitor_present_status(sd);
+
+	v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
+			  client->addr << 1, client->adapter->name);
+	return 0;
+
+err_unreg_cec:
+	i2c_unregister_device(state->i2c_edid);
+err_entity:
+	media_entity_cleanup(&sd->entity);
+err_hdl:
+	v4l2_ctrl_handler_free(&state->hdl);
+	return err;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int adv7511_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct adv7511_state *state = get_adv7511_state(sd);
+
+	state->chip_revision = -1;
+
+	v4l2_dbg(1, debug, sd, "%s removed @ 0x%x (%s)\n", client->name,
+		 client->addr << 1, client->adapter->name);
+
+	adv7511_init_setup(sd);
+	cancel_delayed_work(&state->edid_handler);
+	i2c_unregister_device(state->i2c_edid);
+	destroy_workqueue(state->work_queue);
+	v4l2_device_unregister_subdev(sd);
+	media_entity_cleanup(&sd->entity);
+	v4l2_ctrl_handler_free(sd->ctrl_handler);
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static struct i2c_device_id adv7511_id[] = {
+	{ "adv7511", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adv7511_id);
+
+static struct i2c_driver adv7511_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "adv7511",
+	},
+	.probe = adv7511_probe,
+	.remove = adv7511_remove,
+	.id_table = adv7511_id,
+};
+
+module_i2c_driver(adv7511_driver);