Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits)
  V4L-DVB: cx88-dvb: remove extra attribution for core
  V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index
  V4L/DVB: Add support for SMT7020 to cx88
  V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment
  V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix
  V4L/DVB: gspca_stv06xx: Add support for camera button
  V4L/DVB: gspca_ov519: add support for the button on ov511 based cams
  V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams
  V4L/DVB: gspca_ov519: add support for the button on ov519 based cams
  V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set
  V4L/DVB: gspca_main: some input error handling fixes
  V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs
  V4L/DVB: gspca_pac7302: much improved exposure control
  V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras
  V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls
  V4L/DVB: Documentation: gspca.txt: update known mr97310a cams
  V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix
  V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480
  V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls
  V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl
  ...

46 files changed, 7602 insertions, 2398 deletions

diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 609d65b0b10..e0060c1f054 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -21,6 +21,15 @@ source "drivers/media/video/gspca/m5602/Kconfig"
 source "drivers/media/video/gspca/stv06xx/Kconfig"
 source "drivers/media/video/gspca/gl860/Kconfig"
 
+config USB_GSPCA_BENQ
+	tristate "Benq USB Camera Driver"
+	depends on VIDEO_V4L2 && USB_GSPCA
+	help
+	  Say Y here if you want support for the Benq DC E300 camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gspca_benq.
+
 config USB_GSPCA_CONEX
 	tristate "Conexant Camera Driver"
 	depends on VIDEO_V4L2 && USB_GSPCA
@@ -30,6 +39,17 @@ config USB_GSPCA_CONEX
 	  To compile this driver as a module, choose M here: the
 	  module will be called gspca_conex.
 
+config USB_GSPCA_CPIA1
+	tristate "cpia CPiA (version 1) Camera Driver"
+	depends on VIDEO_V4L2 && USB_GSPCA
+	help
+	  Say Y here if you want support for USB cameras based on the cpia
+	  CPiA chip. Note that you need atleast version 0.6.4 of libv4l for
+	  applications to understand the videoformat generated by this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gspca_cpia1.
+
 config USB_GSPCA_ETOMS
 	tristate "Etoms USB Camera Driver"
 	depends on VIDEO_V4L2 && USB_GSPCA
@@ -86,15 +106,25 @@ config USB_GSPCA_OV519
 	  module will be called gspca_ov519.
 
 config USB_GSPCA_OV534
-	tristate "OV534 USB Camera Driver"
+	tristate "OV534 OV772x USB Camera Driver"
 	depends on VIDEO_V4L2 && USB_GSPCA
 	help
-	  Say Y here if you want support for cameras based on the OV534 chip.
-	  (e.g. Sony Playstation EYE)
+	  Say Y here if you want support for cameras based on the OV534 chip
+	  and sensor OV772x (e.g. Sony Playstation EYE)
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called gspca_ov534.
 
+config USB_GSPCA_OV534_9
+	tristate "OV534 OV965x USB Camera Driver"
+	depends on VIDEO_V4L2 && USB_GSPCA
+	help
+	  Say Y here if you want support for cameras based on the OV534 chip
+	  and sensor OV965x (e.g. Hercules Dualpix)
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gspca_ov534_9.
+
 config USB_GSPCA_PAC207
 	tristate "Pixart PAC207 USB Camera Driver"
 	depends on VIDEO_V4L2 && USB_GSPCA
@@ -122,6 +152,16 @@ config USB_GSPCA_PAC7311
 	  To compile this driver as a module, choose M here: the
 	  module will be called gspca_pac7311.
 
+config USB_GSPCA_SN9C2028
+	tristate "SONIX Dual-Mode USB Camera Driver"
+	depends on VIDEO_V4L2 && USB_GSPCA
+	help
+	  Say Y here if you want streaming support for Sonix SN9C2028 cameras.
+	  These are supported as stillcams in libgphoto2/camlibs/sonix.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gspca_sn9c2028.
+
 config USB_GSPCA_SN9C20X
 	tristate "SN9C20X USB Camera Driver"
 	depends on VIDEO_V4L2 && USB_GSPCA
diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile
index ff2c7279d82..6e4cf1ce01c 100644
--- a/drivers/media/video/gspca/Makefile
+++ b/drivers/media/video/gspca/Makefile
@@ -1,5 +1,7 @@
 obj-$(CONFIG_USB_GSPCA)          += gspca_main.o
+obj-$(CONFIG_USB_GSPCA_BENQ)     += gspca_benq.o
 obj-$(CONFIG_USB_GSPCA_CONEX)    += gspca_conex.o
+obj-$(CONFIG_USB_GSPCA_CPIA1)    += gspca_cpia1.o
 obj-$(CONFIG_USB_GSPCA_ETOMS)    += gspca_etoms.o
 obj-$(CONFIG_USB_GSPCA_FINEPIX)  += gspca_finepix.o
 obj-$(CONFIG_USB_GSPCA_JEILINJ)  += gspca_jeilinj.o
@@ -7,9 +9,11 @@ obj-$(CONFIG_USB_GSPCA_MARS)     += gspca_mars.o
 obj-$(CONFIG_USB_GSPCA_MR97310A) += gspca_mr97310a.o
 obj-$(CONFIG_USB_GSPCA_OV519)    += gspca_ov519.o
 obj-$(CONFIG_USB_GSPCA_OV534)    += gspca_ov534.o
+obj-$(CONFIG_USB_GSPCA_OV534_9)  += gspca_ov534_9.o
 obj-$(CONFIG_USB_GSPCA_PAC207)   += gspca_pac207.o
 obj-$(CONFIG_USB_GSPCA_PAC7302)  += gspca_pac7302.o
 obj-$(CONFIG_USB_GSPCA_PAC7311)  += gspca_pac7311.o
+obj-$(CONFIG_USB_GSPCA_SN9C2028) += gspca_sn9c2028.o
 obj-$(CONFIG_USB_GSPCA_SN9C20X)  += gspca_sn9c20x.o
 obj-$(CONFIG_USB_GSPCA_SONIXB)   += gspca_sonixb.o
 obj-$(CONFIG_USB_GSPCA_SONIXJ)   += gspca_sonixj.o
@@ -30,7 +34,9 @@ obj-$(CONFIG_USB_GSPCA_VC032X)   += gspca_vc032x.o
 obj-$(CONFIG_USB_GSPCA_ZC3XX)    += gspca_zc3xx.o
 
 gspca_main-objs     := gspca.o
+gspca_benq-objs     := benq.o
 gspca_conex-objs    := conex.o
+gspca_cpia1-objs    := cpia1.o
 gspca_etoms-objs    := etoms.o
 gspca_finepix-objs  := finepix.o
 gspca_jeilinj-objs  := jeilinj.o
@@ -38,9 +44,11 @@ gspca_mars-objs     := mars.o
 gspca_mr97310a-objs := mr97310a.o
 gspca_ov519-objs    := ov519.o
 gspca_ov534-objs    := ov534.o
+gspca_ov534_9-objs  := ov534_9.o
 gspca_pac207-objs   := pac207.o
 gspca_pac7302-objs  := pac7302.o
 gspca_pac7311-objs  := pac7311.o
+gspca_sn9c2028-objs := sn9c2028.o
 gspca_sn9c20x-objs  := sn9c20x.o
 gspca_sonixb-objs   := sonixb.o
 gspca_sonixj-objs   := sonixj.o
diff --git a/drivers/media/video/gspca/benq.c b/drivers/media/video/gspca/benq.c
new file mode 100644
index 00000000000..43ac4af8d3e
--- /dev/null
+++ b/drivers/media/video/gspca/benq.c
@@ -0,0 +1,322 @@
+/*
+ * Benq DC E300 subdriver
+ *
+ * Copyright (C) 2009 Jean-Francois Moine (http://moinejf.free.fr)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define MODULE_NAME "benq"
+
+#include "gspca.h"
+
+MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>");
+MODULE_DESCRIPTION("Benq DC E300 USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+/* specific webcam descriptor */
+struct sd {
+	struct gspca_dev gspca_dev;	/* !! must be the first item */
+};
+
+/* V4L2 controls supported by the driver */
+static const struct ctrl sd_ctrls[] = {
+};
+
+static const struct v4l2_pix_format vga_mode[] = {
+	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 3 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG},
+};
+
+static void sd_isoc_irq(struct urb *urb);
+
+/* -- write a register -- */
+static void reg_w(struct gspca_dev *gspca_dev,
+			u16 value, u16 index)
+{
+	struct usb_device *dev = gspca_dev->dev;
+	int ret;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			0x02,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			value,
+			index,
+			NULL,
+			0,
+			500);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "reg_w err %d", ret);
+		gspca_dev->usb_err = ret;
+	}
+}
+
+/* this function is called at probe time */
+static int sd_config(struct gspca_dev *gspca_dev,
+			const struct usb_device_id *id)
+{
+	gspca_dev->cam.cam_mode = vga_mode;
+	gspca_dev->cam.nmodes = ARRAY_SIZE(vga_mode);
+	gspca_dev->cam.no_urb_create = 1;
+	gspca_dev->cam.reverse_alts = 1;
+	return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	return 0;
+}
+
+static int sd_isoc_init(struct gspca_dev *gspca_dev)
+{
+	int ret;
+
+	ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface,
+		gspca_dev->nbalt - 1);
+	if (ret < 0) {
+		err("usb_set_interface failed");
+		return ret;
+	}
+/*	reg_w(gspca_dev, 0x0003, 0x0002); */
+	return 0;
+}
+
+/* -- start the camera -- */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+	struct urb *urb;
+	int i, n;
+
+	/* create 4 URBs - 2 on endpoint 0x83 and 2 on 0x082 */
+#if MAX_NURBS < 4
+#error "Not enough URBs in the gspca table"
+#endif
+#define SD_PKT_SZ 64
+#define SD_NPKT 32
+	for (n = 0; n < 4; n++) {
+		urb = usb_alloc_urb(SD_NPKT, GFP_KERNEL);
+		if (!urb) {
+			err("usb_alloc_urb failed");
+			return -ENOMEM;
+		}
+		gspca_dev->urb[n] = urb;
+		urb->transfer_buffer = usb_buffer_alloc(gspca_dev->dev,
+						SD_PKT_SZ * SD_NPKT,
+						GFP_KERNEL,
+						&urb->transfer_dma);
+
+		if (urb->transfer_buffer == NULL) {
+			err("usb_buffer_alloc failed");
+			return -ENOMEM;
+		}
+		urb->dev = gspca_dev->dev;
+		urb->context = gspca_dev;
+		urb->transfer_buffer_length = SD_PKT_SZ * SD_NPKT;
+		urb->pipe = usb_rcvisocpipe(gspca_dev->dev,
+					n & 1 ? 0x82 : 0x83);
+		urb->transfer_flags = URB_ISO_ASAP
+					| URB_NO_TRANSFER_DMA_MAP;
+		urb->interval = 1;
+		urb->complete = sd_isoc_irq;
+		urb->number_of_packets = SD_NPKT;
+		for (i = 0; i < SD_NPKT; i++) {
+			urb->iso_frame_desc[i].length = SD_PKT_SZ;
+			urb->iso_frame_desc[i].offset = SD_PKT_SZ * i;
+		}
+	}
+
+	return gspca_dev->usb_err;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+	reg_w(gspca_dev, 0x003c, 0x0003);
+	reg_w(gspca_dev, 0x003c, 0x0004);
+	reg_w(gspca_dev, 0x003c, 0x0005);
+	reg_w(gspca_dev, 0x003c, 0x0006);
+	reg_w(gspca_dev, 0x003c, 0x0007);
+	usb_set_interface(gspca_dev->dev, gspca_dev->iface, gspca_dev->nbalt - 1);
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+			u8 *data,		/* isoc packet */
+			int len)		/* iso packet length */
+{
+	/* unused */
+}
+
+/* reception of an URB */
+static void sd_isoc_irq(struct urb *urb)
+{
+	struct gspca_dev *gspca_dev = (struct gspca_dev *) urb->context;
+	struct urb *urb0;
+	u8 *data;
+	int i, st;
+
+	PDEBUG(D_PACK, "sd isoc irq");
+	if (!gspca_dev->streaming)
+		return;
+	if (urb->status != 0) {
+		if (urb->status == -ESHUTDOWN)
+			return;		/* disconnection */
+#ifdef CONFIG_PM
+		if (gspca_dev->frozen)
+			return;
+#endif
+		PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
+		return;
+	}
+
+	/* if this is a control URN (ep 0x83), wait */
+	if (urb == gspca_dev->urb[0] || urb == gspca_dev->urb[2])
+		return;
+
+	/* scan both received URBs */
+	if (urb == gspca_dev->urb[1])
+		urb0 = gspca_dev->urb[0];
+	else
+		urb0 = gspca_dev->urb[2];
+	for (i = 0; i < urb->number_of_packets; i++) {
+
+		/* check the packet status and length */
+		if (urb0->iso_frame_desc[i].actual_length != SD_PKT_SZ
+		    || urb->iso_frame_desc[i].actual_length != SD_PKT_SZ) {
+			PDEBUG(D_ERR, "ISOC bad lengths %d / %d",
+				urb0->iso_frame_desc[i].actual_length,
+				urb->iso_frame_desc[i].actual_length);
+			gspca_dev->last_packet_type = DISCARD_PACKET;
+			continue;
+		}
+		st = urb0->iso_frame_desc[i].status;
+		if (st == 0)
+			st = urb->iso_frame_desc[i].status;
+		if (st) {
+			PDEBUG(D_ERR,
+				"ISOC data error: [%d] status=%d",
+				i, st);
+			gspca_dev->last_packet_type = DISCARD_PACKET;
+			continue;
+		}
+
+		/*
+		 * The images are received in URBs of different endpoints
+		 * (0x83 and 0x82).
+		 * Image pieces in URBs of ep 0x83 are continuated in URBs of
+		 * ep 0x82 of the same index.
+		 * The packets in the URBs of endpoint 0x83 start with:
+		 *	- 80 ba/bb 00 00 = start of image followed by 'ff d8'
+		 *	- 04 ba/bb oo oo = image piece
+		 *		where 'oo oo' is the image offset
+						(not cheked)
+		 *	- (other -> bad frame)
+		 * The images are JPEG encoded with full header and
+		 * normal ff escape.
+		 * The end of image ('ff d9') may occur in any URB.
+		 * (not cheked)
+		 */
+		data = (u8 *) urb0->transfer_buffer
+					+ urb0->iso_frame_desc[i].offset;
+		if (data[0] == 0x80 && (data[1] & 0xfe) == 0xba) {
+
+			/* new image */
+			gspca_frame_add(gspca_dev, LAST_PACKET,
+					NULL, 0);
+			gspca_frame_add(gspca_dev, FIRST_PACKET,
+					data + 4, SD_PKT_SZ - 4);
+		} else if (data[0] == 0x04 && (data[1] & 0xfe) == 0xba) {
+			gspca_frame_add(gspca_dev, INTER_PACKET,
+					data + 4, SD_PKT_SZ - 4);
+		} else {
+			gspca_dev->last_packet_type = DISCARD_PACKET;
+			continue;
+		}
+		data = (u8 *) urb->transfer_buffer
+					+ urb->iso_frame_desc[i].offset;
+			gspca_frame_add(gspca_dev, INTER_PACKET,
+					data, SD_PKT_SZ);
+	}
+
+	/* resubmit the URBs */
+	st = usb_submit_urb(urb0, GFP_ATOMIC);
+	if (st < 0)
+		PDEBUG(D_ERR|D_PACK, "usb_submit_urb(0) ret %d", st);
+	st = usb_submit_urb(urb, GFP_ATOMIC);
+	if (st < 0)
+		PDEBUG(D_ERR|D_PACK, "usb_submit_urb() ret %d", st);
+}
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+	.name = MODULE_NAME,
+	.ctrls = sd_ctrls,
+	.nctrls = ARRAY_SIZE(sd_ctrls),
+	.config = sd_config,
+	.init = sd_init,
+	.isoc_init = sd_isoc_init,
+	.start = sd_start,
+	.stopN = sd_stopN,
+	.pkt_scan = sd_pkt_scan,
+};
+
+/* -- module initialisation -- */
+static const __devinitdata struct usb_device_id device_table[] = {
+	{USB_DEVICE(0x04a5, 0x3035)},
+	{}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+				THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+	.name = MODULE_NAME,
+	.id_table = device_table,
+	.probe = sd_probe,
+	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+	int ret;
+
+	ret = usb_register(&sd_driver);
+	if (ret < 0)
+		return ret;
+	info("registered");
+	return 0;
+}
+static void __exit sd_mod_exit(void)
+{
+	usb_deregister(&sd_driver);
+	info("deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/coarse_expo_autogain.h b/drivers/media/video/gspca/coarse_expo_autogain.h
new file mode 100644
index 00000000000..1cb9d941eaf
--- /dev/null
+++ b/drivers/media/video/gspca/coarse_expo_autogain.h
@@ -0,0 +1,116 @@
+/*
+ * Auto gain algorithm for camera's with a coarse exposure control
+ *
+ * Copyright (C) 2010 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/* Autogain + exposure algorithm for cameras with a coarse exposure control
+   (usually this means we can only control the clockdiv to change exposure)
+   As changing the clockdiv so that the fps drops from 30 to 15 fps for
+   example, will lead to a huge exposure change (it effectively doubles),
+   this algorithm normally tries to only adjust the gain (between 40 and
+   80 %) and if that does not help, only then changes exposure. This leads
+   to a much more stable image then using the knee algorithm which at
+   certain points of the knee graph will only try to adjust exposure,
+   which leads to oscilating as one exposure step is huge.
+
+   Note this assumes that the sd struct for the cam in question has
+   exp_too_high_cnt and exp_too_high_cnt int members for use by this function.
+
+   Returns 0 if no changes were made, 1 if the gain and or exposure settings
+   where changed. */
+static int gspca_coarse_grained_expo_autogain(struct gspca_dev *gspca_dev,
+	int avg_lum, int desired_avg_lum, int deadzone)
+{
+	int i, steps, gain, orig_gain, exposure, orig_exposure;
+	int gain_low, gain_high;
+	const struct ctrl *gain_ctrl = NULL;
+	const struct ctrl *exposure_ctrl = NULL;
+	struct sd *sd = (struct sd *) gspca_dev;
+	int retval = 0;
+
+	for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
+		if (gspca_dev->ctrl_dis & (1 << i))
+			continue;
+		if (gspca_dev->sd_desc->ctrls[i].qctrl.id == V4L2_CID_GAIN)
+			gain_ctrl = &gspca_dev->sd_desc->ctrls[i];
+		if (gspca_dev->sd_desc->ctrls[i].qctrl.id == V4L2_CID_EXPOSURE)
+			exposure_ctrl = &gspca_dev->sd_desc->ctrls[i];
+	}
+	if (!gain_ctrl || !exposure_ctrl) {
+		PDEBUG(D_ERR, "Error: gspca_coarse_grained_expo_autogain "
+			"called on cam without gain or exposure");
+		return 0;
+	}
+
+	if (gain_ctrl->get(gspca_dev, &gain) ||
+	    exposure_ctrl->get(gspca_dev, &exposure))
+		return 0;
+
+	orig_gain = gain;
+	orig_exposure = exposure;
+	gain_low =
+		(gain_ctrl->qctrl.maximum - gain_ctrl->qctrl.minimum) / 5 * 2;
+	gain_low += gain_ctrl->qctrl.minimum;
+	gain_high =
+		(gain_ctrl->qctrl.maximum - gain_ctrl->qctrl.minimum) / 5 * 4;
+	gain_high += gain_ctrl->qctrl.minimum;
+
+	/* If we are of a multiple of deadzone, do multiple steps to reach the
+	   desired lumination fast (with the risc of a slight overshoot) */
+	steps = (desired_avg_lum - avg_lum) / deadzone;
+
+	PDEBUG(D_FRAM, "autogain: lum: %d, desired: %d, steps: %d",
+		avg_lum, desired_avg_lum, steps);
+
+	if ((gain + steps) > gain_high &&
+	    sd->exposure < exposure_ctrl->qctrl.maximum) {
+		gain = gain_high;
+		sd->exp_too_low_cnt++;
+	} else if ((gain + steps) < gain_low &&
+		   sd->exposure > exposure_ctrl->qctrl.minimum) {
+		gain = gain_low;
+		sd->exp_too_high_cnt++;
+	} else {
+		gain += steps;
+		if (gain > gain_ctrl->qctrl.maximum)
+			gain = gain_ctrl->qctrl.maximum;
+		else if (gain < gain_ctrl->qctrl.minimum)
+			gain = gain_ctrl->qctrl.minimum;
+		sd->exp_too_high_cnt = 0;
+		sd->exp_too_low_cnt = 0;
+	}
+
+	if (sd->exp_too_high_cnt > 3) {
+		exposure--;
+		sd->exp_too_high_cnt = 0;
+	} else if (sd->exp_too_low_cnt > 3) {
+		exposure++;
+		sd->exp_too_low_cnt = 0;
+	}
+
+	if (gain != orig_gain) {
+		gain_ctrl->set(gspca_dev, gain);
+		retval = 1;
+	}
+	if (exposure != orig_exposure) {
+		exposure_ctrl->set(gspca_dev, exposure);
+		retval = 1;
+	}
+
+	return retval;
+}
diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index c98b5d69c43..19fe6b24c9a 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -52,7 +52,7 @@ static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val);
 
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
 	{
 	    {
 		.id	 = V4L2_CID_BRIGHTNESS,
@@ -1032,7 +1032,7 @@ static int sd_get_jcomp(struct gspca_dev *gspca_dev,
 }
 
 /* sub-driver description */
-static struct sd_desc sd_desc = {
+static const struct sd_desc sd_desc = {
 	.name = MODULE_NAME,
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
diff --git a/drivers/media/video/gspca/cpia1.c b/drivers/media/video/gspca/cpia1.c
new file mode 100644
index 00000000000..82945ed5cbe
--- /dev/null
+++ b/drivers/media/video/gspca/cpia1.c
@@ -0,0 +1,2022 @@
+/*
+ * cpia CPiA (1) gspca driver
+ *
+ * Copyright (C) 2010 Hans de Goede <hdgoede@redhat.com>
+ *
+ * This module is adapted from the in kernel v4l1 cpia driver which is :
+ *
+ * (C) Copyright 1999-2000 Peter Pregler
+ * (C) Copyright 1999-2000 Scott J. Bertin
+ * (C) Copyright 1999-2000 Johannes Erdfelt <johannes@erdfelt.com>
+ * (C) Copyright 2000 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define MODULE_NAME "cpia1"
+
+#include "gspca.h"
+
+MODULE_AUTHOR("Hans de Goede <hdgoede@redhat.com>");
+MODULE_DESCRIPTION("Vision CPiA");
+MODULE_LICENSE("GPL");
+
+/* constant value's */
+#define MAGIC_0		0x19
+#define MAGIC_1		0x68
+#define DATA_IN		0xC0
+#define DATA_OUT	0x40
+#define VIDEOSIZE_QCIF	0	/* 176x144 */
+#define VIDEOSIZE_CIF	1	/* 352x288 */
+#define SUBSAMPLE_420	0
+#define SUBSAMPLE_422	1
+#define YUVORDER_YUYV	0
+#define YUVORDER_UYVY	1
+#define NOT_COMPRESSED	0
+#define COMPRESSED	1
+#define NO_DECIMATION	0
+#define DECIMATION_ENAB	1
+#define EOI		0xff	/* End Of Image */
+#define EOL		0xfd	/* En