Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits)
  [media] ir-mce_kbd-decoder: include module.h for its facilities
  [media] ov5642: include module.h for its facilities
  [media] em28xx: Fix DVB-C maxsize for em2884
  [media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz
  [media] v4l: mt9v032: Fix Bayer pattern
  [media] V4L: mt9m111: rewrite set_pixfmt
  [media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear
  [media] V4L: initial driver for ov5642 CMOS sensor
  [media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails
  [media] V4L: soc-camera: remove soc-camera bus and devices on it
  [media] V4L: soc-camera: un-export the soc-camera bus
  [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier
  [media] V4L: add media bus configuration subdev operations
  [media] V4L: soc-camera: group struct field initialisations together
  [media] V4L: soc-camera: remove now unused soc-camera specific PM hooks
  [media] V4L: pxa-camera: switch to using standard PM hooks
  [media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param
  [media] Don't OOPS if videobuf_dvb_get_frontend return NULL
  [media] NetUP Dual DVB-T/C CI RF: load firmware according card revision
  [media] omap3isp: Support configurable HS/VS polarities
  ...

Fix up conflicts:
 - arch/arm/mach-omap2/board-rx51-peripherals.c:
     cleanup regulator supply definitions in mach-omap2
   vs
     OMAP3: RX-51: define vdds_csib regulator supply
 - drivers/staging/tm6000/tm6000-alsa.c (trivial)

12 files changed, 5095 insertions, 25 deletions

diff --git a/drivers/media/video/davinci/Kconfig b/drivers/media/video/davinci/Kconfig
index 6b195403564..60a456ebdc7 100644
--- a/drivers/media/video/davinci/Kconfig
+++ b/drivers/media/video/davinci/Kconfig
@@ -91,3 +91,26 @@ config VIDEO_ISIF
 
 	   To compile this driver as a module, choose M here: the
 	   module will be called vpfe.
+
+config VIDEO_DM644X_VPBE
+	tristate "DM644X VPBE HW module"
+	depends on ARCH_DAVINCI_DM644x
+	select VIDEO_VPSS_SYSTEM
+	select VIDEOBUF_DMA_CONTIG
+	help
+	    Enables VPBE modules used for display on a DM644x
+	    SoC.
+
+	    To compile this driver as a module, choose M here: the
+	    module will be called vpbe.
+
+
+config VIDEO_VPBE_DISPLAY
+	tristate "VPBE V4L2 Display driver"
+	depends on ARCH_DAVINCI_DM644x
+	select VIDEO_DM644X_VPBE
+	help
+	    Enables VPBE V4L2 Display driver on a DM644x device
+
+	    To compile this driver as a module, choose M here: the
+	    module will be called vpbe_display.
diff --git a/drivers/media/video/davinci/Makefile b/drivers/media/video/davinci/Makefile
index a37955745aa..ae7dafb689a 100644
--- a/drivers/media/video/davinci/Makefile
+++ b/drivers/media/video/davinci/Makefile
@@ -16,3 +16,5 @@ obj-$(CONFIG_VIDEO_VPFE_CAPTURE) += vpfe_capture.o
 obj-$(CONFIG_VIDEO_DM6446_CCDC) += dm644x_ccdc.o
 obj-$(CONFIG_VIDEO_DM355_CCDC) += dm355_ccdc.o
 obj-$(CONFIG_VIDEO_ISIF) += isif.o
+obj-$(CONFIG_VIDEO_DM644X_VPBE) += vpbe.o vpbe_osd.o vpbe_venc.o
+obj-$(CONFIG_VIDEO_VPBE_DISPLAY) += vpbe_display.o
diff --git a/drivers/media/video/davinci/vpbe.c b/drivers/media/video/davinci/vpbe.c
new file mode 100644
index 00000000000..d773d30de22
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe.c
@@ -0,0 +1,864 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe.h>
+#include <media/davinci/vpss.h>
+#include <media/davinci/vpbe_venc.h>
+
+#define VPBE_DEFAULT_OUTPUT	"Composite"
+#define VPBE_DEFAULT_MODE	"ntsc"
+
+static char *def_output = VPBE_DEFAULT_OUTPUT;
+static char *def_mode = VPBE_DEFAULT_MODE;
+static int debug;
+
+module_param(def_output, charp, S_IRUGO);
+module_param(def_mode, charp, S_IRUGO);
+module_param(debug, int, 0644);
+
+MODULE_PARM_DESC(def_output, "vpbe output name (default:Composite)");
+MODULE_PARM_DESC(def_mode, "vpbe output mode name (default:ntsc");
+MODULE_PARM_DESC(debug, "Debug level 0-1");
+
+MODULE_DESCRIPTION("TI DMXXX VPBE Display controller");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments");
+
+/**
+ * vpbe_current_encoder_info - Get config info for current encoder
+ * @vpbe_dev - vpbe device ptr
+ *
+ * Return ptr to current encoder config info
+ */
+static struct encoder_config_info*
+vpbe_current_encoder_info(struct vpbe_device *vpbe_dev)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int index = vpbe_dev->current_sd_index;
+
+	return ((index == 0) ? &cfg->venc :
+				&cfg->ext_encoders[index-1]);
+}
+
+/**
+ * vpbe_find_encoder_sd_index - Given a name find encoder sd index
+ *
+ * @vpbe_config - ptr to vpbe cfg
+ * @output_index - index used by application
+ *
+ * Return sd index of the encoder
+ */
+static int vpbe_find_encoder_sd_index(struct vpbe_config *cfg,
+			     int index)
+{
+	char *encoder_name = cfg->outputs[index].subdev_name;
+	int i;
+
+	/* Venc is always first	*/
+	if (!strcmp(encoder_name, cfg->venc.module_name))
+		return 0;
+
+	for (i = 0; i < cfg->num_ext_encoders; i++) {
+		if (!strcmp(encoder_name,
+		     cfg->ext_encoders[i].module_name))
+			return i+1;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_g_cropcap - Get crop capabilities of the display
+ * @vpbe_dev - vpbe device ptr
+ * @cropcap - cropcap is a ptr to struct v4l2_cropcap
+ *
+ * Update the crop capabilities in crop cap for current
+ * mode
+ */
+static int vpbe_g_cropcap(struct vpbe_device *vpbe_dev,
+			  struct v4l2_cropcap *cropcap)
+{
+	if (NULL == cropcap)
+		return -EINVAL;
+	cropcap->bounds.left = 0;
+	cropcap->bounds.top = 0;
+	cropcap->bounds.width = vpbe_dev->current_timings.xres;
+	cropcap->bounds.height = vpbe_dev->current_timings.yres;
+	cropcap->defrect = cropcap->bounds;
+
+	return 0;
+}
+
+/**
+ * vpbe_enum_outputs - enumerate outputs
+ * @vpbe_dev - vpbe device ptr
+ * @output - ptr to v4l2_output structure
+ *
+ * Enumerates the outputs available at the vpbe display
+ * returns the status, -EINVAL if end of output list
+ */
+static int vpbe_enum_outputs(struct vpbe_device *vpbe_dev,
+			     struct v4l2_output *output)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int temp_index = output->index;
+
+	if (temp_index >= cfg->num_outputs)
+		return -EINVAL;
+
+	*output = cfg->outputs[temp_index].output;
+	output->index = temp_index;
+
+	return 0;
+}
+
+static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct vpbe_enc_mode_info var;
+	int curr_output = vpbe_dev->current_out_index;
+	int i;
+
+	if (NULL == mode)
+		return -EINVAL;
+
+	for (i = 0; i < cfg->outputs[curr_output].num_modes; i++) {
+		var = cfg->outputs[curr_output].modes[i];
+		if (!strcmp(mode, var.name)) {
+			vpbe_dev->current_timings = var;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int vpbe_get_current_mode_info(struct vpbe_device *vpbe_dev,
+				      struct vpbe_enc_mode_info *mode_info)
+{
+	if (NULL == mode_info)
+		return -EINVAL;
+
+	*mode_info = vpbe_dev->current_timings;
+
+	return 0;
+}
+
+static int vpbe_get_dv_preset_info(struct vpbe_device *vpbe_dev,
+				   unsigned int dv_preset)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct vpbe_enc_mode_info var;
+	int curr_output = vpbe_dev->current_out_index;
+	int i;
+
+	for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
+		var = cfg->outputs[curr_output].modes[i];
+		if ((var.timings_type & VPBE_ENC_DV_PRESET) &&
+		  (var.timings.dv_preset == dv_preset)) {
+			vpbe_dev->current_timings = var;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+/* Get std by std id */
+static int vpbe_get_std_info(struct vpbe_device *vpbe_dev,
+			     v4l2_std_id std_id)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct vpbe_enc_mode_info var;
+	int curr_output = vpbe_dev->current_out_index;
+	int i;
+
+	for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
+		var = cfg->outputs[curr_output].modes[i];
+		if ((var.timings_type & VPBE_ENC_STD) &&
+		  (var.timings.std_id & std_id)) {
+			vpbe_dev->current_timings = var;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int vpbe_get_std_info_by_name(struct vpbe_device *vpbe_dev,
+				char *std_name)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct vpbe_enc_mode_info var;
+	int curr_output = vpbe_dev->current_out_index;
+	int i;
+
+	for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
+		var = cfg->outputs[curr_output].modes[i];
+		if (!strcmp(var.name, std_name)) {
+			vpbe_dev->current_timings = var;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_set_output - Set output
+ * @vpbe_dev - vpbe device ptr
+ * @index - index of output
+ *
+ * Set vpbe output to the output specified by the index
+ */
+static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index)
+{
+	struct encoder_config_info *curr_enc_info =
+			vpbe_current_encoder_info(vpbe_dev);
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int enc_out_index;
+	int sd_index;
+	int ret = 0;
+
+	if (index >= cfg->num_outputs)
+		return -EINVAL;
+
+	mutex_lock(&vpbe_dev->lock);
+
+	sd_index = vpbe_dev->current_sd_index;
+	enc_out_index = cfg->outputs[index].output.index;
+	/*
+	 * Currently we switch the encoder based on output selected
+	 * by the application. If media controller is implemented later
+	 * there is will be an API added to setup_link between venc
+	 * and external encoder. So in that case below comparison always
+	 * match and encoder will not be switched. But if application
+	 * chose not to use media controller, then this provides current
+	 * way of switching encoder at the venc output.
+	 */
+	if (strcmp(curr_enc_info->module_name,
+		   cfg->outputs[index].subdev_name)) {
+		/* Need to switch the encoder at the output */
+		sd_index = vpbe_find_encoder_sd_index(cfg, index);
+		if (sd_index < 0) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (ret)
+			goto out;
+	}
+
+	/* Set output at the encoder */
+	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
+				       s_routing, 0, enc_out_index, 0);
+	if (ret)
+		goto out;
+
+	/*
+	 * It is assumed that venc or extenal encoder will set a default
+	 * mode in the sub device. For external encoder or LCD pannel output,
+	 * we also need to set up the lcd port for the required mode. So setup
+	 * the lcd port for the default mode that is configured in the board
+	 * arch/arm/mach-davinci/board-dm355-evm.setup file for the external
+	 * encoder.
+	 */
+	ret = vpbe_get_mode_info(vpbe_dev,
+				 cfg->outputs[index].default_mode);
+	if (!ret) {
+		struct osd_state *osd_device = vpbe_dev->osd_device;
+
+		osd_device->ops.set_left_margin(osd_device,
+			vpbe_dev->current_timings.left_margin);
+		osd_device->ops.set_top_margin(osd_device,
+		vpbe_dev->current_timings.upper_margin);
+		vpbe_dev->current_sd_index = sd_index;
+		vpbe_dev->current_out_index = index;
+	}
+out:
+	mutex_unlock(&vpbe_dev->lock);
+	return ret;
+}
+
+static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < cfg->num_outputs; i++) {
+		if (!strcmp(def_output,
+			    cfg->outputs[i].output.name)) {
+			ret = vpbe_set_output(vpbe_dev, i);
+			if (!ret)
+				vpbe_dev->current_out_index = i;
+			return ret;
+		}
+	}
+	return ret;
+}
+
+/**
+ * vpbe_get_output - Get output
+ * @vpbe_dev - vpbe device ptr
+ *
+ * return current vpbe output to the the index
+ */
+static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
+{
+	return vpbe_dev->current_out_index;
+}
+
+/**
+ * vpbe_s_dv_preset - Set the given preset timings in the encoder
+ *
+ * Sets the preset if supported by the current encoder. Return the status.
+ * 0 - success & -EINVAL on error
+ */
+static int vpbe_s_dv_preset(struct vpbe_device *vpbe_dev,
+		     struct v4l2_dv_preset *dv_preset)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int out_index = vpbe_dev->current_out_index;
+	int sd_index = vpbe_dev->current_sd_index;
+	int ret;
+
+
+	if (!(cfg->outputs[out_index].output.capabilities &
+	    V4L2_OUT_CAP_PRESETS))
+		return -EINVAL;
+
+	ret = vpbe_get_dv_preset_info(vpbe_dev, dv_preset->preset);
+
+	if (ret)
+		return ret;
+
+	mutex_lock(&vpbe_dev->lock);
+
+
+	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
+					s_dv_preset, dv_preset);
+	/* set the lcd controller output for the given mode */
+	if (!ret) {
+		struct osd_state *osd_device = vpbe_dev->osd_device;
+
+		osd_device->ops.set_left_margin(osd_device,
+		vpbe_dev->current_timings.left_margin);
+		osd_device->ops.set_top_margin(osd_device,
+		vpbe_dev->current_timings.upper_margin);
+	}
+	mutex_unlock(&vpbe_dev->lock);
+
+	return ret;
+}
+
+/**
+ * vpbe_g_dv_preset - Get the preset in the current encoder
+ *
+ * Get the preset in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int vpbe_g_dv_preset(struct vpbe_device *vpbe_dev,
+		     struct v4l2_dv_preset *dv_preset)
+{
+	if (vpbe_dev->current_timings.timings_type &
+	  VPBE_ENC_DV_PRESET) {
+		dv_preset->preset = vpbe_dev->current_timings.timings.dv_preset;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_enum_dv_presets - Enumerate the dv presets in the current encoder
+ *
+ * Get the preset in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int vpbe_enum_dv_presets(struct vpbe_device *vpbe_dev,
+			 struct v4l2_dv_enum_preset *preset_info)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int out_index = vpbe_dev->current_out_index;
+	struct vpbe_output *output = &cfg->outputs[out_index];
+	int j = 0;
+	int i;
+
+	if (!(output->output.capabilities & V4L2_OUT_CAP_PRESETS))
+		return -EINVAL;
+
+	for (i = 0; i < output->num_modes; i++) {
+		if (output->modes[i].timings_type == VPBE_ENC_DV_PRESET) {
+			if (j == preset_info->index)
+				break;
+			j++;
+		}
+	}
+
+	if (i == output->num_modes)
+		return -EINVAL;
+
+	return v4l_fill_dv_preset_info(output->modes[i].timings.dv_preset,
+					preset_info);
+}
+
+/**
+ * vpbe_s_std - Set the given standard in the encoder
+ *
+ * Sets the standard if supported by the current encoder. Return the status.
+ * 0 - success & -EINVAL on error
+ */
+static int vpbe_s_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int out_index = vpbe_dev->current_out_index;
+	int sd_index = vpbe_dev->current_sd_index;
+	int ret;
+
+	if (!(cfg->outputs[out_index].output.capabilities &
+		V4L2_OUT_CAP_STD))
+		return -EINVAL;
+
+	ret = vpbe_get_std_info(vpbe_dev, *std_id);
+	if (ret)
+		return ret;
+
+	mutex_lock(&vpbe_dev->lock);
+
+	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
+			       s_std_output, *std_id);
+	/* set the lcd controller output for the given mode */
+	if (!ret) {
+		struct osd_state *osd_device = vpbe_dev->osd_device;
+
+		osd_device->ops.set_left_margin(osd_device,
+		vpbe_dev->current_timings.left_margin);
+		osd_device->ops.set_top_margin(osd_device,
+		vpbe_dev->current_timings.upper_margin);
+	}
+	mutex_unlock(&vpbe_dev->lock);
+
+	return ret;
+}
+
+/**
+ * vpbe_g_std - Get the standard in the current encoder
+ *
+ * Get the standard in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int vpbe_g_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id)
+{
+	struct vpbe_enc_mode_info cur_timings = vpbe_dev->current_timings;
+
+	if (cur_timings.timings_type & VPBE_ENC_STD) {
+		*std_id = cur_timings.timings.std_id;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_set_mode - Set mode in the current encoder using mode info
+ *
+ * Use the mode string to decide what timings to set in the encoder
+ * This is typically useful when fbset command is used to change the current
+ * timings by specifying a string to indicate the timings.
+ */
+static int vpbe_set_mode(struct vpbe_device *vpbe_dev,
+			 struct vpbe_enc_mode_info *mode_info)
+{
+	struct vpbe_enc_mode_info *preset_mode = NULL;
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct v4l2_dv_preset dv_preset;
+	struct osd_state *osd_device;
+	int out_index = vpbe_dev->current_out_index;
+	int ret = 0;
+	int i;
+
+	if ((NULL == mode_info) || (NULL == mode_info->name))
+		return -EINVAL;
+
+	for (i = 0; i < cfg->outputs[out_index].num_modes; i++) {
+		if (!strcmp(mode_info->name,
+		     cfg->outputs[out_index].modes[i].name)) {
+			preset_mode = &cfg->outputs[out_index].modes[i];
+			/*
+			 * it may be one of the 3 timings type. Check and
+			 * invoke right API
+			 */
+			if (preset_mode->timings_type & VPBE_ENC_STD)
+				return vpbe_s_std(vpbe_dev,
+						 &preset_mode->timings.std_id);
+			if (preset_mode->timings_type & VPBE_ENC_DV_PRESET) {
+				dv_preset.preset =
+					preset_mode->timings.dv_preset;
+				return vpbe_s_dv_preset(vpbe_dev, &dv_preset);
+			}
+		}
+	}
+
+	/* Only custom timing should reach here */
+	if (preset_mode == NULL)
+		return -EINVAL;
+
+	mutex_lock(&vpbe_dev->lock);
+
+	osd_device = vpbe_dev->osd_device;
+	vpbe_dev->current_timings = *preset_mode;
+	osd_device->ops.set_left_margin(osd_device,
+		vpbe_dev->current_timings.left_margin);
+	osd_device->ops.set_top_margin(osd_device,
+		vpbe_dev->current_timings.upper_margin);
+
+	mutex_unlock(&vpbe_dev->lock);
+
+	return ret;
+}
+
+static int vpbe_set_default_mode(struct vpbe_device *vpbe_dev)
+{
+	int ret;
+
+	ret = vpbe_get_std_info_by_name(vpbe_dev, def_mode);
+	if (ret)
+		return ret;
+
+	/* set the default mode in the encoder */
+	return vpbe_set_mode(vpbe_dev, &vpbe_dev->current_timings);
+}
+
+static int platform_device_get(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct vpbe_device *vpbe_dev = data;
+
+	if (strcmp("vpbe-osd", pdev->name) == 0)
+		vpbe_dev->osd_device = platform_get_drvdata(pdev);
+
+	return 0;
+}
+
+/**
+ * vpbe_initialize() - Initialize the vpbe display controller
+ * @vpbe_dev - vpbe device ptr
+ *
+ * Master frame buffer device drivers calls this to initialize vpbe
+ * display controller. This will then registers v4l2 device and the sub
+ * devices and sets a current encoder sub device for display. v4l2 display
+ * device driver is the master and frame buffer display device driver is
+ * the slave. Frame buffer display driver checks the initialized during
+ * probe and exit if not initialized. Returns status.
+ */
+static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev)
+{
+	struct encoder_config_info *enc_info;
+	struct v4l2_subdev **enc_subdev;
+	struct osd_state *osd_device;
+	struct i2c_adapter *i2c_adap;
+	int output_index;
+	int num_encoders;
+	int ret = 0;
+	int err;
+	int i;
+
+	/*
+	 * v4l2 abd FBDev frame buffer devices will get the vpbe_dev pointer
+	 * from the platform device by iteration of platform drivers and
+	 * matching with device name
+	 */
+	if (NULL == vpbe_dev || NULL == dev) {
+		printk(KERN_ERR "Null device pointers.\n");
+		return -ENODEV;
+	}
+
+	if (vpbe_dev->initialized)
+		return 0;
+
+	mutex_lock(&vpbe_dev->lock);
+
+	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) {
+		/* We have dac clock available for platform */
+		vpbe_dev->dac_clk = clk_get(vpbe_dev->pdev, "vpss_dac");
+		if (IS_ERR(vpbe_dev->dac_clk)) {
+			ret =  PTR_ERR(vpbe_dev->dac_clk);
+			goto vpbe_unlock;
+		}
+		if (clk_enable(vpbe_dev->dac_clk)) {
+			ret =  -ENODEV;
+			goto vpbe_unlock;
+		}
+	}
+
+	/* first enable vpss clocks */
+	vpss_enable_clock(VPSS_VPBE_CLOCK, 1);
+
+	/* First register a v4l2 device */
+	ret = v4l2_device_register(dev, &vpbe_dev->v4l2_dev);
+	if (ret) {
+		v4l2_err(dev->driver,
+			"Unable to register v4l2 device.\n");
+		goto vpbe_fail_clock;
+	}
+	v4l2_info(&vpbe_dev->v4l2_dev, "vpbe v4l2 device registered\n");
+
+	err = bus_for_each_dev(&platform_bus_type, NULL, vpbe_dev,
+			       platform_device_get);
+	if (err < 0)
+		return err;
+
+	vpbe_dev->venc = venc_sub_dev_init(&vpbe_dev->v4l2_dev,
+					   vpbe_dev->cfg->venc.module_name);
+	/* register venc sub device */
+	if (vpbe_dev->venc == NULL) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"vpbe unable to init venc sub device\n");
+		ret = -ENODEV;
+		goto vpbe_fail_v4l2_device;
+	}
+	/* initialize osd device */
+	osd_device = vpbe_dev->osd_device;
+
+	if (NULL != osd_device->ops.initialize) {
+		err = osd_device->ops.initialize(osd_device);
+		if (err) {
+			v4l2_err(&vpbe_dev->v4l2_dev,
+				 "unable to initialize the OSD device");
+			err = -ENOMEM;
+			goto vpbe_fail_v4l2_device;
+		}
+	}
+
+	/*
+	 * Register any external encoders that are configured. At index 0 we
+	 * store venc sd index.
+	 */
+	num_encoders = vpbe_dev->cfg->num_ext_encoders + 1;
+	vpbe_dev->encoders = kmalloc(
+				sizeof(struct v4l2_subdev *)*num_encoders,
+				GFP_KERNEL);
+	if (NULL == vpbe_dev->encoders) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"unable to allocate memory for encoders sub devices");
+		ret = -ENOMEM;
+		goto vpbe_fail_v4l2_device;
+	}
+
+	i2c_adap = i2c_get_adapter(vpbe_dev->cfg->i2c_adapter_id);
+	for (i = 0; i < (vpbe_dev->cfg->num_ext_encoders + 1); i++) {
+		if (i == 0) {
+			/* venc is at index 0 */
+			enc_subdev = &vpbe_dev->encoders[i];
+			*enc_subdev = vpbe_dev->venc;
+			continue;
+		}
+		enc_info = &vpbe_dev->cfg->ext_encoders[i];
+		if (enc_info->is_i2c) {
+			enc_subdev = &vpbe_dev->encoders[i];
+			*enc_subdev = v4l2_i2c_new_subdev_board(
+						&vpbe_dev->v4l2_dev, i2c_adap,
+						&enc_info->board_info, NULL);
+			if (*enc_subdev)
+				v4l2_info(&vpbe_dev->v4l2_dev,
+					  "v4l2 sub device %s registered\n",
+					  enc_info->module_name);
+			else {
+				v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s"
+					 " failed to register",
+					 enc_info->module_name);
+				ret = -ENODEV;
+				goto vpbe_fail_sd_register;
+			}
+		} else
+			v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders"
+				 " currently not supported");
+	}
+
+	/* set the current encoder and output to that of venc by default */
+	vpbe_dev->current_sd_index = 0;
+	vpbe_dev->current_out_index = 0;
+	output_index = 0;
+
+	mutex_unlock(&vpbe_dev->lock);
+
+	printk(KERN_NOTICE "Setting default output to %s\n", def_output);
+	ret = vpbe_set_default_output(vpbe_dev);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default output %s",
+			 def_output);
+		return ret;
+	}
+
+	printk(KERN_NOTICE "Setting default mode to %s\n", def_mode);
+	ret = vpbe_set_default_mode(vpbe_dev);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default mode %s",
+			 def_mode);
+		return ret;
+	}
+	vpbe_dev->initialized = 1;
+	/* TBD handling of bootargs for default output and mode */
+	return 0;
+
+vpbe_fail_sd_register:
+	kfree(vpbe_dev->encoders);
+vpbe_fail_v4l2_device:
+	v4l2_device_unregister(&vpbe_dev->v4l2_dev);
+vpbe_fail_clock:
+	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0)
+		clk_put(vpbe_dev->dac_clk);
+vpbe_unlock:
+	mutex_unlock(&vpbe_dev->lock);
+	return ret;
+}
+
+/**
+ * vpbe_deinitialize() - de-initialize the vpbe display controller
+ * @dev - Master and slave device ptr
+ *
+ * vpbe_master and slave frame buffer devices calls this to de-initialize
+ * the display controller. It is called when master and slave device
+ * driver modules are removed and no longer requires the display controller.
+ */
+static void vpbe_deinitialize(struct device *dev, struct vpbe_device *vpbe_dev)
+{
+	v4l2_device_unregister(&vpbe_dev->v4l2_dev);
+	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0)
+		clk_put(vpbe_dev->dac_clk);
+
+	kfree(vpbe_dev->encoders);
+	vpbe_dev->initialized = 0;
+	/* disable vpss clocks */
+	vpss_enable_clock(VPSS_VPBE_CLOCK, 0);
+}
+
+static struct vpbe_device_ops vpbe_dev_ops = {
+	.g_cropcap = vpbe_g_cropcap,
+	.enum_outputs = vpbe_enum_outputs,
+	.set_output = vpbe_set_output,
+	.get_output = vpbe_get_output,
+	.s_dv_preset = vpbe_s_dv_preset,
+	.g_dv_preset = vpbe_g_dv_preset,
+	.enum_dv_presets = vpbe_enum_dv_presets,
+	.s_std = vpbe_s_std,
+	.g_std = vpbe_g_std,
+	.initialize = vpbe_initialize,
+	.deinitialize = vpbe_deinitialize,
+	.get_mode_info = vpbe_get_current_mode_info,
+	.set_mode = vpbe_set_mode,
+};
+
+static __devinit int vpbe_probe(struct platform_device *pdev)
+{
+	struct vpbe_device *vpbe_dev;
+	struct vpbe_config *cfg;
+	int ret = -EINVAL;
+
+	if (pdev->dev.platform_data == NULL) {
+		v4l2_err(pdev->dev.driver, "No platform data\n");
+		return -ENODEV;
+	}
+	cfg = pdev->dev.platform_data;
+
+	if (!cfg->module_name[0] ||
+	    !cfg->osd.module_name[0] ||
+	    !cfg->venc.module_name[0]) {
+		v4l2_err(pdev->dev.driver, "vpbe display module names not"
+			 " defined\n");
+		return ret;
+	}
+
+	vpbe_dev = kzalloc(sizeof(*vpbe_dev), GFP_KERNEL);
+	if (vpbe_dev == NULL) {
+		v4l2_err(pdev->dev.driver, "Unable to allocate memory"
+			 " for vpbe_device\n");
+		return -ENOMEM;
+	}
+	vpbe_dev->cfg = cfg;
+	vpbe_dev->ops = vpbe_dev_ops;
+	vpbe_dev->pdev = &pdev->dev;
+
+	if (cfg->outputs->num_modes > 0)
+		vpbe_dev->current_timings = vpbe_dev->cfg->outputs[0].modes[0];
+	else
+		return -ENODEV;
+
+	/* set the driver data in platform device */
+	platform_set_drvdata(pdev, vpbe_dev);
+	mutex_init(&vpbe_dev->lock);
+
+	return 0;
+}
+
+static int vpbe_remove(struct platform_device *device)
+{
+	struct vpbe_device *vpbe_dev = platform_get_drvdata(device);
+
+	kfree(vpbe_dev);
+
+	return 0;
+}
+
+static struct platform_driver vpbe_driver = {
+	.driver	= {
+		.name	= "vpbe_controller",
+		.owner	= THIS_MODULE,
+	},
+	.probe = vpbe_probe,
+	.remove = vpbe_remove,
+};
+
+/**
+ * vpbe_init: initialize the vpbe driver
+ *
+ * This function registers device and driver to the kernel
+ */
+static __init int vpbe_init(void)
+{
+	return platform_driver_register(&vpbe_driver);
+}
+
+/**
+ * vpbe_cleanup : cleanup function for vpbe driver
+ *
+ * This will un-registers the device and driver to the kernel
+ */
+static void vpbe_cleanup(void)
+{
+	platform_driver_unregister(&vpbe_driver);
+}
+
+/* Function for module initialization and cleanup */
+module_init(vpbe_init);
+module_exit(vpbe_cleanup);
diff --git a/drivers/media/video/davinci/vpbe_display.c b/drivers/media/video/davinci/vpbe_display.c
new file mode 100644
index 00000000000..7f1d83a6d57
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe_display.c
@@ -0,0 +1,1860 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mm.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <linux/slab.h>
+
+#include <asm/pgtable.h>
+#include <mach/cputype.h>
+
+#include <media/v4l2-dev.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_display.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe.h>
+#include <media/davinci/vpbe_venc.h>
+#include <media/davinci/vpbe_osd.h>
+#include "vpbe_venc_regs.h"
+
+#define VPBE_DISPLAY_DRIVER "vpbe-v4l2"
+
+static int debug;
+
+#define VPBE_DISPLAY_SD_BUF_SIZE (720*576*2)
+#define VPBE_DEFAULT_NUM_BUFS 3
+
+module_param(debug, int, 0644);
+
+static int venc_is_second_field(struct vpbe_display *disp_dev)
+{
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	int ret;
+	int val;
+
+	ret = v4l2_subdev_call(vpbe_dev->venc,
+			       core,
+			       ioctl,
+			       VENC_GET_FLD,
+			       &val);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			 "Error in getting Field ID 0\n");
+	}
+	return val;
+}
+
+static void vpbe_isr_even_field(struct vpbe_display *disp_obj,
+				struct vpbe_layer *layer)
+{
+	struct timespec timevalue;
+
+	if (layer->cur_frm == layer->next_frm)
+		return;
+	ktime_get_ts(&timevalue);
+	layer->cur_frm->ts.tv_sec = timevalue.tv_sec;
+	layer->cur_frm->ts.tv_usec = timevalue.tv_nsec / NSEC_PER_USEC;
+	layer->cur_frm->state = VIDEOBUF_DONE;
+	wake_up_interruptible(&layer->cur_frm->done);
+	/* Make cur_frm pointing to next_frm */
+	layer->cur_frm = layer->next_frm;
+}
+
+static void vpbe_isr_odd_field(struct vpbe_display *disp_obj,
+				struct vpbe_layer *layer)
+{
+	struct osd_state *osd_device = disp_obj->osd_device;
+	unsigned long addr;
+
+	spin_lock(&disp_obj->dma_queue_lock);
+	if (list_empty(&layer->dma_queue) ||
+		(layer->cur_frm != layer->next_frm)) {
+		spin_unlock(&disp_obj->dma_queue_lock);
+		return;
+	}
+	/*
+	 * one field is displayed configure
+	 * the next frame if it is available
+	 * otherwise hold on current frame
+	 * Get next from the buffer queue
+	 */
+	layer->next_frm = list_entry(
+				layer->dma_queue.next,
+				struct  videobuf_buffer,
+				queue);
+	/* Remove that from the buffer queue */
+	list_del(&layer->next_frm->queue);
+	spin_unlock(&disp_obj->dma_queue_lock);
+	/* Mark state of the frame to active */
+	layer->next_frm->state = VIDEOBUF_ACTIVE;
+	addr = videobuf_to_dma_contig(layer->next_frm);
+	osd_device->ops.start_layer(osd_device,
+			layer->layer_info.id,
+			addr,
+			disp_obj->cbcr_ofst);
+}
+
+/* interrupt service routine */
+static irqreturn_t venc_isr(int irq, void *arg)
+{
+	struct vpbe_display *disp_dev = (struct vpbe_display *)arg;
+	struct vpbe_layer *layer;
+	static unsigned last_event;
+	unsigned event = 0;
+	int fid;
+	int i;
+
+	if ((NULL == arg) || (NULL == disp_dev->dev[0]))
+		return IRQ_HANDLED;
+
+	if (venc_is_second_field(disp_dev))
+		event |= VENC_SECOND_FIELD;
+	else
+		event |= VENC_FIRST_FIELD;
+
+	if (event == (last_event & ~VENC_END_OF_FRAME)) {
+		/*
+		* If the display is non-interlaced, then we need to flag the
+		* end-of-frame event at every interrupt regardless of the
+		* value of the FIDST bit.  We can conclude that the display is
+		* non-interlaced if the value of the FIDST bit is unchanged
+		* from the previous interrupt.
+		*/
+		event |= VENC_END_OF_FRAME;
+	} else if (event == VENC_SECOND_FIELD) {
+		/* end-of-frame for interlaced display */
+		event |= VENC_END_OF_FRAME;
+	}
+	last_event = event;
+
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		layer = disp_dev->dev[i];
+		/* If streaming is started in this layer */
+		if (!layer->started)
+			continue;
+
+		if (layer->layer_first_int) {
+			layer->layer_first_int = 0;
+			continue;
+		}
+		/* Check the field format */
+		if ((V4L2_FIELD_NONE == layer->pix_fmt.field) &&
+			(event & VENC_END_OF_FRAME)) {
+			/* Progressive mode */
+
+			vpbe_isr_even_field(disp_dev, layer);
+			vpbe_isr_odd_field(disp_dev, layer);
+		} else {
+		/* Interlaced mode */
+
+			layer->field_id ^= 1;
+			if (event & VENC_FIRST_FIELD)
+				fid = 0;
+			else
+				fid = 1;
+
+			/*
+			* If field id does not match with store
+			* field id
+			*/
+			if (fid != layer->field_id) {
+				/* Make them in sync */
+				layer->field_id = fid;
+				continue;
+			}
+			/*
+			* device field id and local field id are
+			* in sync. If this is even field
+			*/
+			if (0 == fid)
+				vpbe_isr_even_field(disp_dev, layer);
+			else  /* odd field */
+				vpbe_isr_odd_field(disp_dev, layer);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * vpbe_buffer_prepare()
+ * This is the callback function called from videobuf_qbuf() function
+ * the buffer is prepared and user space virtual address is converted into
+ * physical address
+ */
+static int vpbe_buffer_prepare(struct videobuf_queue *q,
+				  struct videobuf_buffer *vb,
+				  enum v4l2_field field)
+{
+	struct vpbe_fh *fh = q->priv_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	unsigned long addr;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+				"vpbe_buffer_prepare\n");
+
+	/* If buffer is not initialized, initialize it */
+	if (VIDEOBUF_NEEDS_INIT == vb->state) {
+		vb->width = layer->pix_fmt.width;
+		vb->height = layer->pix_fmt.height;
+		vb->size = layer->pix_fmt.sizeimage;
+		vb->field = field;
+
+		ret = videobuf_iolock(q, vb, NULL);
+		if (ret < 0) {
+			v4l2_err(&vpbe_dev->v4l2_dev, "Failed to map \
+				user address\n");
+			return -EINVAL;
+		}
+
+		addr = videobuf_to_dma_contig(vb);
+
+		if (q->streaming) {
+			if (!IS_ALIGNED(addr, 8)) {
+				v4l2_err(&vpbe_dev->v4l2_dev,
+					"buffer_prepare:offset is \
+					not aligned to 32 bytes\n");
+				return -EINVAL;
+			}
+		}
+		vb->state = VIDEOBUF_PREPARED;
+	}
+	return 0;
+}
+
+/*
+ * vpbe_buffer_setup()
+ * This function allocates memory for the buffers
+ */
+static int vpbe_buffer_setup(struct videobuf_queue *q,
+				unsigned int *count,
+				unsigned int *size)
+{
+	/* Get the file handle object and layer object */
+	struct vpbe_fh *fh = q->priv_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_buffer_setup\n");
+
+	*size = layer->pix_fmt.sizeimage;
+
+	/* Store number of buffers allocated in numbuffer member */
+	if (*count < VPBE_DEFAULT_NUM_BUFS)
+		*count = layer->numbuffers = VPBE_DEFAULT_NUM_BUFS;
+
+	return 0;
+}
+
+/*
+ * vpbe_buffer_queue()
+ * This function adds the buffer to DMA queue
+ */
+static void vpbe_buffer_queue(struct videobuf_queue *q,
+				 struct videobuf_buffer *vb)
+{
+	/* Get the file handle object and layer object */
+	struct vpbe_fh *fh = q->priv_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_display *disp = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	unsigned long flags;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"vpbe_buffer_queue\n");
+
+	/* add the buffer to the DMA queue */
+	spin_lock_irqsave(&disp->dma_queue_lock, flags);
+	list_add_tail(&vb->queue, &layer->dma_queue);
+	spin_unlock_irqrestore(&disp->dma_queue_lock, flags);
+	/* Change state of the buffer */
+	vb->state = VIDEOBUF_QUEUED;
+}
+
+/*
+ * vpbe_buffer_release()
+ * This function is called from the videobuf layer to free memory allocated to
+ * the buffers
+ */
+static void vpbe_buffer_release(struct videobuf_queue *q,
+				   struct videobuf_buffer *vb)
+{
+	/* Get the file handle object and layer object */
+	struct vpbe_fh *fh = q->priv_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"vpbe_buffer_release\n");
+
+	if (V4L2_MEMORY_USERPTR != layer->memory)
+		videobuf_dma_contig_free(q, vb);
+
+	vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static struct videobuf_queue_ops video_qops = {
+	.buf_setup = vpbe_buffer_setup,
+	.buf_prepare = vpbe_buffer_prepare,
+	.buf_queue = vpbe_buffer_queue,
+	.buf_release = vpbe_buffer_release,
+};
+
+static
+struct vpbe_layer*
+_vpbe_display_get_other_win_layer(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer)
+{
+	enum vpbe_display_device_id thiswin, otherwin;
+	thiswin = layer->device_id;
+
+	otherwin = (thiswin == VPBE_DISPLAY_DEVICE_0) ?
+	VPBE_DISPLAY_DEVICE_1 : VPBE_DISPLAY_DEVICE_0;
+	return disp_dev->dev[otherwin];
+}
+
+static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer)
+{
+	struct osd_layer_config *cfg  = &layer->layer_info.config;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	unsigned long addr;
+	int ret;
+
+	addr = videobuf_to_dma_contig(layer->cur_frm);
+	/* Set address in the display registers */
+	osd_device->ops.start_layer(osd_device,
+				    layer->layer_info.id,
+				    addr,
+				    disp_dev->cbcr_ofst);
+
+	ret = osd_device->ops.enable_layer(osd_device,
+				layer->layer_info.id, 0);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Error in enabling osd window layer 0\n");
+		return -1;
+	}
+
+	/* Enable the window */
+	layer->layer_info.enable = 1;
+	if (cfg->pixfmt == PIXFMT_NV12) {
+		struct vpbe_layer *otherlayer =
+			_vpbe_display_get_other_win_layer(disp_dev, layer);
+
+		ret = osd_device->ops.enable_layer(osd_device,
+				otherlayer->layer_info.id, 1);
+		if (ret < 0) {
+			v4l2_err(&vpbe_dev->v4l2_dev,
+				"Error in enabling osd window layer 1\n");
+			return -1;
+		}
+		otherlayer->layer_info.enable = 1;
+	}
+	return 0;
+}
+
+static void
+vpbe_disp_calculate_scale_factor(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer,
+			int expected_xsize, int expected_ysize)
+{
+	struct display_layer_info *layer_info = &layer->layer_info;
+	struct v4l2_pix_format *pixfmt = &layer->pix_fmt;
+	struct osd_layer_config *cfg  = &layer->layer_info.config;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	int calculated_xsize;
+	int h_exp = 0;
+	int v_exp = 0;
+	int h_scale;
+	int v_scale;
+
+	v4l2_std_id standard_id = vpbe_dev->current_timings.timings.std_id;
+
+	/*
+	 * Application initially set the image format. Current display
+	 * size is obtained from the vpbe display controller. expected_xsize
+	 * and expected_ysize are set through S_CROP ioctl. Based on this,
+	 * driver will calculate the scale factors for vertical and
+	 * horizontal direction so that the image is displayed scaled
+	 * and expanded. Application uses expansion to display the image
+	 * in a square pixel. Otherwise it is displayed using displays
+	 * pixel aspect ratio.It is expected that application chooses
+	 * the crop coordinates for cropped or scaled display. if crop
+	 * size is less than the image size, it is displayed cropped or
+	 * it is displayed scaled and/or expanded.
+	 *
+	 * to begin with, set the crop window same as expected. Later we
+	 * will override with scaled window size
+	 */
+
+	cfg->xsize = pixfmt->width;
+	cfg->ysize = pixfmt->height;
+	layer_info->h_zoom = ZOOM_X1;	/* no horizontal zoom */
+	layer_info->v_zoom = ZOOM_X1;	/* no horizontal zoom */
+	layer_info->h_exp = H_EXP_OFF;	/* no horizontal zoom */
+	layer_info->v_exp = V_EXP_OFF;	/* no horizontal zoom */
+
+	if (pixfmt->width < expected_xsize) {
+		h_scale = vpbe_dev->current_timings.xres / pixfmt->width;
+		if (h_scale < 2)
+			h_scale = 1;
+		else if (h_scale >= 4)
+			h_scale = 4;
+		else
+			h_scale = 2;
+		cfg->xsize *= h_scale;
+		if (cfg->xsize < expected_xsize) {
+			if ((standard_id & V4L2_STD_525_60) ||
+			(standard_id & V4L2_STD_625_50)) {
+				calculated_xsize = (cfg->xsize *
+					VPBE_DISPLAY_H_EXP_RATIO_N) /
+					VPBE_DISPLAY_H_EXP_RATIO_D;
+				if (calculated_xsize <= expected_xsize) {
+					h_exp = 1;
+					cfg->xsize = calculated_xsize;
+				}
+			}
+		}
+		if (h_scale == 2)
+			layer_info->h_zoom = ZOOM_X2;
+		else if (h_scale == 4)
+			layer_info->h_zoom = ZOOM_X4;
+		if (h_exp)
+			layer_info->h_exp = H_EXP_9_OVER_8;
+	} else {
+		/* no scaling, only cropping. Set display area to crop area */
+		cfg->xsize = expected_xsize;
+	}
+
+	if (pixfmt->height < expected_ysize) {
+		v_scale = expected_ysize / pixfmt->height;
+		if (v_scale < 2)
+			v_scale = 1;
+		else if (v_scale >= 4)
+			v_scale = 4;
+		else
+			v_scale = 2;
+		cfg->ysize *= v_scale;
+		if (cfg->ysize < expected_ysize) {
+			if ((standard_id & V4L2_STD_625_50)) {
+				calculated_xsize = (cfg->ysize *
+					VPBE_DISPLAY_V_EXP_RATIO_N) /
+					VPBE_DISPLAY_V_EXP_RATIO_D;
+				if (calculated_xsize <= expected_ysize) {
+					v_exp = 1;
+					cfg->ysize = calculated_xsize;
+				}
+			}
+		}
+		if (v_scale == 2)
+			layer_info->v_zoom = ZOOM_X2;
+		else if (v_scale == 4)
+			layer_info->v_zoom = ZOOM_X4;
+		if (v_exp)
+			layer_info->h_exp = V_EXP_6_OVER_5;
+	} else {
+		/* no scaling, only cropping. Set display area to crop area */
+		cfg->ysize = expected_ysize;
+	}
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"crop display xsize = %d, ysize = %d\n",
+		cfg->xsize, cfg->ysize);
+}
+
+static void vpbe_disp_adj_position(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer,
+			int top, int left)
+{
+	struct osd_layer_config *cfg = &layer->layer_info.config;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+
+	cfg->xpos = min((unsigned int)left,
+			vpbe_dev->current_timings.xres - cfg->xsize);
+	cfg->ypos = min((unsigned int)top,
+			vpbe_dev->current_timings.yres - cfg->ysize);
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"new xpos = %d, ypos = %d\n",
+		cfg->xpos, cfg->ypos);
+}
+
+static void vpbe_disp_check_window_params(struct vpbe_display *disp_dev,
+			struct v4l2_rect *c)
+{
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+
+	if ((c->width == 0) ||
+	  ((c->width + c->left) > vpbe_dev->current_timings.xres))
+		c->width = vpbe_dev->current_timings.xres - c->left;
+
+	if ((c->height == 0) || ((c->height + c->top) >
+	  vpbe_dev->current_timings.yres))
+		c->height = vpbe_dev->current_timings.yres - c->top;
+
+	/* window height must be even for interlaced display */
+	if (vpbe_dev->current_timings.interlaced)
+		c->height &= (~0x01);
+
+}
+
+/**
+ * vpbe_try_format()
+ * If user application provides width and height, and have bytesperline set
+ * to zero, driver calculates bytesperline and sizeimage based on hardware
+ * limits.
+ */
+static int vpbe_try_format(struct vpbe_display *disp_dev,
+			struct v4l2_pix_format *pixfmt, int check)
+{
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	int min_height = 1;
+	int min_width = 32;
+	int max_height;
+	int max_width;
+	int bpp;
+
+	if ((pixfmt->pixelformat != V4L2_PIX_FMT_UYVY) &&
+	    (pixfmt->pixelformat != V4L2_PIX_FMT_NV12))
+		/* choose default as V4L2_PIX_FMT_UYVY */
+		pixfmt->pixelformat = V4L2_PIX_FMT_UYVY;
+
+	/* Check the field format */
+	if ((pixfmt->field != V4L2_FIELD_INTERLACED) &&
+		(pixfmt->field != V4L2_FIELD_NONE)) {
+		if (vpbe_dev->current_timings.interlaced)
+			pixfmt->field = V4L2_FIELD_INTERLACED;
+		else
+			pixfmt->field = V4L2_FIELD_NONE;
+	}
+
+	if (pixfmt->field == V4L2_FIELD_INTERLACED)
+		min_height = 2;
+
+	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
+		bpp = 1;
+	else
+		bpp = 2;
+
+	max_width = vpbe_dev->current_timings.xres;
+	max_height = vpbe_dev->current_timings.yres;
+
+	min_width /= bpp;
+
+	if (!pixfmt->width || (pixfmt->width < min_width) ||
+		(pixfmt->width > max_width)) {
+		pixfmt->width = vpbe_dev->current_timings.xres;
+	}
+
+	if (!pixfmt->height || (pixfmt->height  < min_height) ||
+		(pixfmt->height  > max_height)) {
+		pixfmt->height = vpbe_dev->current_timings.yres;
+	}
+
+	if (pixfmt->bytesperline < (pixfmt->width * bpp))
+		pixfmt->bytesperline = pixfmt->width * bpp;
+
+	/* Make the bytesperline 32 byte aligned */
+	pixfmt->bytesperline = ((pixfmt->width * bpp + 31) & ~31);
+
+	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
+		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height +
+				(pixfmt->bytesperline * pixfmt->height >> 1);
+	else
+		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
+
+	return 0;
+}
+
+static int vpbe_display_g_priority(struct file *file, void *priv,
+				enum v4l2_priority *p)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+
+	*p = v4l2_prio_max(&layer->prio);
+
+	return 0;
+}
+
+static int vpbe_display_s_priority(struct file *file, void *priv,
+				enum v4l2_priority p)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	int ret;
+
+	ret = v4l2_prio_change(&layer->prio, &fh->prio, p);
+
+	return ret;
+}
+
+static int vpbe_display_querycap(struct file *file, void  *priv,
+			       struct v4l2_capability *cap)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	cap->version = VPBE_DISPLAY_VERSION_CODE;
+	cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
+	strlcpy(cap->driver, VPBE_DISPLAY_DRIVER, sizeof(cap->driver));
+	strlcpy(cap->bus_info, "platform", sizeof(cap->bus_info));
+	strlcpy(cap->card, vpbe_dev->cfg->module_name, sizeof(cap->card));
+
+	return 0;
+}
+
+static int vpbe_display_s_crop(struct file *file, void *priv,
+			     struct v4l2_crop *crop)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_display *disp_dev = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct osd_layer_config *cfg = &layer->layer_info.config;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	struct v4l2_rect *rect = &crop->c;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"VIDIOC_S_CROP, layer id = %d\n", layer->device_id);
+
+	if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+
+	if (rect->top < 0)
+		rect->top = 0;
+	if (rect->left < 0)
+		rect->left = 0;
+
+	vpbe_disp_check_window_params(disp_dev, rect);
+
+	osd_device->ops.get_layer_config(osd_device,
+			layer->layer_info.id, cfg);
+
+	vpbe_disp_calculate_scale_factor(disp_dev, layer,
+					rect->width,
+					rect->height);
+	vpbe_disp_adj_position(disp_dev, layer, rect->top,
+					rect->left);
+	ret = osd_device->ops.set_layer_config(osd_device,
+				layer->layer_info.id, cfg);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Error in set layer config:\n");
+		return -EINVAL;
+	}
+
+	/* apply zooming and h or v expansion */
+	osd_device->ops.set_zoom(osd_device,
+			layer->layer_info.id,
+			layer->layer_info.h_zoom,
+			layer->layer_info.v_zoom);
+	ret = osd_device->ops.set_vid_expansion(osd_device,
+			layer->layer_info.h_exp,
+			layer->layer_info.v_exp);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+		"Error in set vid expansion:\n");
+		return -EINVAL;
+	}
+
+	if ((layer->layer_info.h_zoom != ZOOM_X1) ||
+		(layer->layer_info.v_zoom != ZOOM_X1) ||
+		(layer->layer_info.h_exp != H_EXP_OFF) ||
+		(layer->layer_info.v_exp != V_EXP_OFF))
+		/* Enable expansion filter */
+		osd_device->ops.set_interpolation_filter(osd_device, 1);
+	else
+		osd_device->ops.set_interpolation_filter(osd_device, 0);
+
+	return 0;
+}
+
+static int vpbe_display_g_crop(struct file *file, void *priv,
+			     struct v4l2_crop *crop)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct osd_layer_config *cfg = &layer->layer_info.config;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	struct osd_state *osd_device = fh->disp_dev->osd_device;
+	struct v4l2_rect *rect = &crop->c;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"VIDIOC_G_CROP, layer id = %d\n",
+			layer->device_id);
+
+	if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n");
+		ret = -EINVAL;
+	}
+	osd_device->ops.get_layer_config(osd_device,
+				layer->layer_info.id, cfg);
+	rect->top = cfg->ypos;
+	rect->left = cfg->xpos;
+	rect->width = cfg->xsize;
+	rect->height = cfg->ysize;
+
+	return 0;
+}
+
+static int vpbe_display_cropcap(struct file *file, void *priv,
+			      struct v4l2_cropcap *cropcap)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_CROPCAP ioctl\n");
+
+	cropcap->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	cropcap->bounds.left = 0;
+	cropcap->bounds.top = 0;
+	cropcap->bounds.width = vpbe_dev->current_timings.xres;
+	cropcap->bounds.height = vpbe_dev->current_timings.yres;
+	cropcap->pixelaspect = vpbe_dev->current_timings.aspect;
+	cropcap->defrect = cropcap->bounds;
+	return 0;
+}
+
+static int vpbe_display_g_fmt(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"VIDIOC_G_FMT, layer id = %d\n",
+			layer->device_id);
+
+	/* If buffer type is video output */
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n");
+		return -EINVAL;
+	}
+	/* Fill in the information about format */
+	fmt->fmt.pix = layer->pix_fmt;
+
+	return 0;
+}
+
+static int vpbe_display_enum_fmt(struct file *file, void  *priv,
+				   struct v4l2_fmtdesc *fmt)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	unsigned int index = 0;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+				"VIDIOC_ENUM_FMT, layer id = %d\n",
+				layer->device_id);
+	if (fmt->index > 1) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid format index\n");
+		return -EINVAL;
+	}
+
+	/* Fill in the information about format */
+	index = fmt->index;
+	memset(fmt, 0, sizeof(*fmt));
+	fmt->index = index;
+	fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	if (index == 0) {
+		strcpy(fmt->description, "YUV 4:2:2 - UYVY");
+		fmt->pixelformat = V4L2_PIX_FMT_UYVY;
+	} else {
+		strcpy(fmt->description, "Y/CbCr 4:2:0");
+		fmt->pixelformat = V4L2_PIX_FMT_NV12;
+	}
+
+	return 0;
+}
+
+static int vpbe_display_s_fmt(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_display *disp_dev = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct osd_layer_config *cfg  = &layer->layer_info.config;
+	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"VIDIOC_S_FMT, layer id = %d\n",
+			layer->device_id);
+
+	/* If streaming is started, return error */
+	if (layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
+		return -EBUSY;
+	}
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
+		v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "invalid type\n");
+		return -EINVAL;
+	}
+	/* Check for valid pixel format */
+	ret = vpbe_try_format(disp_dev, pixfmt, 1);
+	if (ret)
+		return ret;
+
+	/* YUV420 is requested, check availability of the
+	other video window */
+
+	layer->pix_fmt = *pixfmt;
+
+	/* Get osd layer config */
+	osd_device->ops.get_layer_config(osd_device,
+			layer->layer_info.id, cfg);
+	/* Store the pixel format in the layer object */
+	cfg->xsize = pixfmt->width;
+	cfg->ysize = pixfmt->height;
+	cfg->line_length = pixfmt->bytesperline;
+	cfg->ypos = 0;
+	cfg->xpos = 0;
+	cfg->interlaced = vpbe_dev->current_timings.interlaced;
+
+	if (V4L2_PIX_FMT_UYVY == pixfmt->pixelformat)
+		cfg->pixfmt = PIXFMT_YCbCrI;
+
+	/* Change of the default pixel format for both video windows */
+	if (V4L2_PIX_FMT_NV12 == pixfmt->pixelformat) {
+		struct vpbe_layer *otherlayer;
+		cfg->pixfmt = PIXFMT_NV12;
+		otherlayer = _vpbe_display_get_other_win_layer(disp_dev,
+								layer);
+		otherlayer->layer_info.config.pixfmt = PIXFMT_NV12;
+	}
+
+	/* Set the layer config in the osd window */
+	ret = osd_device->ops.set_layer_config(osd_device,
+				layer->layer_info.id, cfg);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+				"Error in S_FMT params:\n");
+		return -EINVAL;
+	}
+
+	/* Readback and fill the local copy of current pix format */
+	osd_device->ops.get_layer_config(osd_device,
+			layer->layer_info.id, cfg);
+
+	return 0;
+}
+
+static int vpbe_display_try_fmt(struct file *file, void *priv,
+				  struct v4l2_format *fmt)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_display *disp_dev = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_TRY_FMT\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n");
+		return -EINVAL;
+	}
+
+	/* Check for valid field format */
+	return  vpbe_try_format(disp_dev, pixfmt, 0);
+
+}
+
+/**
+ * vpbe_display_s_std - Set the given standard in the encoder
+ *
+ * Sets the standard if supported by the current encoder. Return the status.
+ * 0 - success & -EINVAL on error
+ */
+static int vpbe_display_s_std(struct file *file, void *priv,
+				v4l2_std_id *std_id)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_STD\n");
+
+	/* If streaming is started, return error */
+	if (layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
+		return -EBUSY;
+	}
+	if (NULL != vpbe_dev->ops.s_std) {
+		ret = vpbe_dev->ops.s_std(vpbe_dev, std_id);
+		if (ret) {
+			v4l2_err(&vpbe_dev->v4l2_dev,
+			"Failed to set standard for sub devices\n");
+			return -EINVAL;
+		}
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_g_std - Get the standard in the current encoder
+ *
+ * Get the standard in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int vpbe_display_g_std(struct file *file, void *priv,
+				v4l2_std_id *std_id)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_G_STD\n");
+
+	/* Get the standard from the current encoder */
+	if (vpbe_dev->current_timings.timings_type & VPBE_ENC_STD) {
+		*std_id = vpbe_dev->current_timings.timings.std_id;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_display_enum_output - enumerate outputs
+ *
+ * Enumerates the outputs available at the vpbe display
+ * returns the status, -EINVAL if end of output list
+ */
+static int vpbe_display_enum_output(struct file *file, void *priv,
+				    struct v4l2_output *output)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_ENUM_OUTPUT\n");
+
+	/* Enumerate outputs */
+
+	if (NULL == vpbe_dev->ops.enum_outputs)
+		return -EINVAL;
+
+	ret = vpbe_dev->ops.enum_outputs(vpbe_dev, output);
+	if (ret) {
+		v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"Failed to enumerate outputs\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_s_output - Set output to
+ * the output specified by the index
+ */
+static int vpbe_display_s_output(struct file *file, void *priv,
+				unsigned int i)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_S_OUTPUT\n");
+	/* If streaming is started, return error */
+	if (layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
+		return -EBUSY;
+	}
+	if (NULL == vpbe_dev->ops.set_output)
+		return -EINVAL;
+
+	ret = vpbe_dev->ops.set_output(vpbe_dev, i);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Failed to set output for sub devices\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_g_output - Get output from subdevice
+ * for a given by the index
+ */
+static int vpbe_display_g_output(struct file *file, void *priv,
+				unsigned int *i)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_OUTPUT\n");
+	/* Get the standard from the current encoder */
+	*i = vpbe_dev->current_out_index;
+
+	return 0;
+}
+
+/**
+ * vpbe_display_enum_dv_presets - Enumerate the dv presets
+ *
+ * enum the preset in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int
+vpbe_display_enum_dv_presets(struct file *file, void *priv,
+			struct v4l2_dv_enum_preset *preset)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_DV_PRESETS\n");
+
+	/* Enumerate outputs */
+	if (NULL == vpbe_dev->ops.enum_dv_presets)
+		return -EINVAL;
+
+	ret = vpbe_dev->ops.enum_dv_presets(vpbe_dev, preset);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Failed to enumerate dv presets info\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_s_dv_preset - Set the dv presets
+ *
+ * Set the preset in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int
+vpbe_display_s_dv_preset(struct file *file, void *priv,
+				struct v4l2_dv_preset *preset)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_DV_PRESETS\n");
+
+
+	/* If streaming is started, return error */
+	if (layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
+		return -EBUSY;
+	}
+
+	/* Set the given standard in the encoder */
+	if (NULL != vpbe_dev->ops.s_dv_preset)
+		return -EINVAL;
+
+	ret = vpbe_dev->ops.s_dv_preset(vpbe_dev, preset);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Failed to set the dv presets info\n");
+		return -EINVAL;
+	}
+	/* set the current norm to zero to be consistent. If STD is used
+	 * v4l2 layer will set the norm properly on successful s_std call
+	 */
+	layer->video_dev.current_norm = 0;
+
+	return 0;
+}
+
+/**
+ * vpbe_display_g_dv_preset - Set the dv presets
+ *
+ * Get the preset in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int
+vpbe_display_g_dv_preset(struct file *file, void *priv,
+				struct v4l2_dv_preset *dv_preset)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_DV_PRESETS\n");
+
+	/* Get the given standard in the encoder */
+
+	if (vpbe_dev->current_timings.timings_type &
+				VPBE_ENC_DV_PRESET) {
+		dv_preset->preset =
+			vpbe_dev->current_timings.timings.dv_preset;
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int vpbe_display_streamoff(struct file *file, void *priv,
+				enum v4l2_buf_type buf_type)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	struct osd_state *osd_device = fh->disp_dev->osd_device;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"VIDIOC_STREAMOFF,layer id = %d\n",
+			layer->device_id);
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	/* If io is allowed for this file handle, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
+		return -EACCES;
+	}
+
+	/* If streaming is not started, return error */
+	if (!layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "streaming not started in layer"
+			" id = %d\n", layer->device_id);
+		return -EINVAL;
+	}
+
+	osd_device->ops.disable_layer(osd_device,
+			layer->layer_info.id);
+	layer->started = 0;
+	ret = videobuf_streamoff(&layer->buffer_queue);
+
+	return ret;
+}
+
+static int vpbe_display_streamon(struct file *file, void *priv,
+			 enum v4l2_buf_type buf_type)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_display *disp_dev = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	int ret;
+
+	osd_device->ops.disable_layer(osd_device,
+			layer->layer_info.id);
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_STREAMON, layerid=%d\n",
+						layer->device_id);
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	/* If file handle is not allowed IO, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
+		return -EACCES;
+	}
+	/* If Streaming is already started, return error */
+	if (layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "layer is already streaming\n");
+		return -EBUSY;
+	}
+
+	/*
+	 * Call videobuf_streamon to start streaming
+	 * in videobuf
+	 */
+	ret = videobuf_streamon(&layer->buffer_queue);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+		"error in videobuf_streamon\n");
+		return ret;
+	}
+	/* If buffer queue is empty, return error */
+	if (list_empty(&layer->dma_queue)) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "buffer queue is empty\n");
+		goto streamoff;
+	}
+	/* Get the next frame from the buffer queue */
+	layer->next_frm = layer->cur_frm = list_entry(layer->dma_queue.next,
+				struct videobuf_buffer, queue);
+	/* Remove buffer from the buffer queue */
+	list_del(&layer->cur_frm->queue);
+	/* Mark state of the current frame to active */
+	layer->cur_frm->state = VIDEOBUF_ACTIVE;
+	/* Initialize field_id and started member */
+	layer->field_id = 0;
+
+	/* Set parameters in OSD and VENC */
+	ret = vpbe_set_osd_display_params(disp_dev, layer);
+	if (ret < 0)
+		goto streamoff;
+
+	/*
+	 * if request format is yuv420 semiplanar, need to
+	 * enable both video windows
+	 */
+	layer->started = 1;
+
+	layer->layer_first_int = 1;
+
+	return ret;
+streamoff:
+	ret = videobuf_streamoff(&layer->buffer_queue);
+	return ret;
+}
+
+static int vpbe_display_dqbuf(struct file *file, void *priv,
+		      struct v4l2_buffer *buf)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"VIDIOC_DQBUF, layer id = %d\n",
+		layer->device_id);
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+	/* If this file handle is not allowed to do IO, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
+		return -EACCES;
+	}
+	if (file->f_flags & O_NONBLOCK)
+		/* Call videobuf_dqbuf for non blocking mode */
+		ret = videobuf_dqbuf(&layer->buffer_queue, buf, 1);
+	else
+		/* Call videobuf_dqbuf for blocking mode */
+		ret = videobuf_dqbuf(&layer->buffer_queue, buf, 0);
+
+	return ret;
+}
+
+static int vpbe_display_qbuf(struct file *file, void *priv,
+		     struct v4l2_buffer *p)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"VIDIOC_QBUF, layer id = %d\n",
+		layer->device_id);
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != p->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	/* If this file handle is not allowed to do IO, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
+		return -EACCES;
+	}
+
+	return videobuf_qbuf(&layer->buffer_queue, p);
+}
+
+static int vpbe_display_querybuf(struct file *file, void *priv,
+			 struct v4l2_buffer *buf)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"VIDIOC_QUERYBUF, layer id = %d\n",
+		layer->device_id);
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	/* Call videobuf_querybuf to get information */
+	ret = videobuf_querybuf(&layer->buffer_queue, buf);
+
+	return ret;
+}
+
+static int vpbe_display_reqbufs(struct file *file, void *priv,
+			struct v4l2_requestbuffers *req_buf)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_reqbufs\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != req_buf->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	/* If io users of the layer is not zero, return error */
+	if (0 != layer->io_usrs) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "not IO user\n");
+		return -EBUSY;
+	}
+	/* Initialize videobuf queue as per the buffer type */
+	videobuf_queue_dma_contig_init(&layer->buffer_queue,
+				&video_qops,
+				vpbe_dev->pdev,
+				&layer->irqlock,
+				V4L2_BUF_TYPE_VIDEO_OUTPUT,
+				layer->pix_fmt.field,
+				sizeof(struct videobuf_buffer),
+				fh, NULL);
+
+	/* Set io allowed member of file handle to TRUE */
+	fh->io_allowed = 1;
+	/* Increment io usrs member of layer object to 1 */
+	layer->io_usrs = 1;
+	/* Store type of memory requested in layer object */
+	layer->memory = req_buf->memory;
+	/* Initialize buffer queue */
+	INIT_LIST_HEAD(&layer->dma_queue);
+	/* Allocate buffers */
+	ret = videobuf_reqbufs(&layer->buffer_queue, req_buf);
+
+	return ret;
+}
+
+/*
+ * vpbe_display_mmap()
+ * It is used to map kernel space buffers into user spaces
+ */
+static int vpbe_display_mmap(struct file *filep, struct vm_area_struct *vma)
+{
+	/* Get the layer object and file handle object */
+	struct vpbe_fh *fh = filep->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_mmap\n");
+
+	return videobuf_mmap_mapper(&layer->buffer_queue, vma);
+}
+
+/* vpbe_display_poll(): It is used for select/poll system call
+ */
+static unsigned int vpbe_display_poll(struct file *filep, poll_table *wait)
+{
+	struct vpbe_fh *fh = filep->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	unsigned int err = 0;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_poll\n");
+	if (layer->started)
+		err = videobuf_poll_stream(filep, &layer->buffer_queue, wait);
+	return err;
+}
+
+/*
+ * vpbe_display_open()
+ * It creates object of file handle structure and stores it in private_data
+ * member of filepointer
+ */
+static int vpbe_display_open(struct file *file)
+{
+	struct vpbe_fh *fh = NULL;
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_display *disp_dev = layer->disp_dev;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	int err;
+
+	/* Allocate memory for the file handle object */
+	fh = kmalloc(sizeof(struct vpbe_fh), GFP_KERNEL);
+	if (fh == NULL) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"unable to allocate memory for file handle object\n");
+		return -ENOMEM;
+	}
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"vpbe display open plane = %d\n",
+			layer->device_id);
+
+	/* store pointer to fh in private_data member of filep */
+	file->private_data = fh;
+	fh->layer = layer;
+	fh->disp_dev = disp_dev;
+
+	if (!layer->usrs) {
+
+		/* First claim the layer for this device */
+		err = osd_device->ops.request_layer(osd_device,
+						layer->layer_info.id);
+		if (err < 0) {
+			/* Couldn't get layer */
+			v4l2_err(&vpbe_dev->v4l2_dev,
+				"Display Manager failed to allocate layer\n");
+			kfree(fh);
+			return -EINVAL;
+		}
+	}
+	/* Increment layer usrs counter */
+	layer->usrs++;
+	/* Set io_allowed member to false */
+	fh->io_allowed = 0;
+	/* Initialize priority of this instance to default priority */
+	fh->prio = V4L2_PRIORITY_UNSET;
+	v4l2_prio_open(&layer->prio, &fh->prio);
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"vpbe display device opened successfully\n");
+	return 0;
+}
+
+/*
+ * vpbe_display_release()
+ * This function deletes buffer queue, frees the buffers and the davinci
+ * display file * handle
+ */
+static int vpbe_display_release(struct file *file)
+{
+	/* Get the layer object and file handle object */
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct osd_layer_config *cfg  = &layer->layer_info.config;
+	struct vpbe_display *disp_dev = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct osd_state *osd_device = disp_dev->osd_device;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_release\n");
+
+	/* if this instance is doing IO */
+	if (fh->io_allowed) {
+		/* Reset io_usrs member of layer object */
+		layer->io_usrs = 0;
+
+		osd_device->ops.disable_layer(osd_device,
+				layer->layer_info.id);
+		layer->started = 0;
+		/* Free buffers allocated */
+		videobuf_queue_cancel(&layer->buffer_queue);
+		videobuf_mmap_free(&layer->buffer_queue);
+	}
+
+	/* Decrement layer usrs counter */
+	layer->usrs--;
+	/* If this file handle has initialize encoder device, reset it */
+	if (!layer->usrs) {
+		if (cfg->pixfmt == PIXFMT_NV12) {
+			struct vpbe_layer *otherlayer;
+			otherlayer =
+			_vpbe_display_get_other_win_layer(disp_dev, layer);
+			osd_device->ops.disable_layer(osd_device,
+					otherlayer->layer_info.id);
+			osd_device->ops.release_layer(osd_device,
+					otherlayer->layer_info.id);
+		}
+		osd_device->ops.disable_layer(osd_device,
+				layer->layer_info.id);
+		osd_device->ops.release_layer(osd_device,
+				layer->layer_info.id);
+	}
+	/* Close the priority */
+	v4l2_prio_close(&layer->prio, fh->prio);
+	file->private_data = NULL;
+
+	/* Free memory allocated to file handle object */
+	kfree(fh);
+
+	disp_dev->cbcr_ofst = 0;
+
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int vpbe_display_g_register(struct file *file, void *priv,
+			struct v4l2_dbg_register *reg)
+{
+	struct v4l2_dbg_match *match = &reg->match;
+
+	if (match->type >= 2) {
+		v4l2_subdev_call(vpbe_dev->venc,
+				 core,
+				 g_register,
+				 reg);
+	}
+
+	return 0;
+}
+
+static int vpbe_display_s_register(struct file *file, void *priv,
+			struct v4l2_dbg_register *reg)
+{
+	return 0;
+}
+#endif
+
+/* vpbe capture ioctl operations */
+static const struct v4l2_ioctl_ops vpbe_ioctl_ops = {
+	.vidioc_querycap	 = vpbe_display_querycap,
+	.vidioc_g_fmt_vid_out    = vpbe_display_g_fmt,
+	.vidioc_enum_fmt_vid_out = vpbe_display_enum_fmt,
+	.vidioc_s_fmt_vid_out    = vpbe_display_s_fmt,
+	.vidioc_try_fmt_vid_out  = vpbe_display_try_fmt,
+	.vidioc_reqbufs		 = vpbe_display_reqbufs,
+	.vidioc_querybuf	 = vpbe_display_querybuf,
+	.vidioc_qbuf		 = vpbe_display_qbuf,
+	.vidioc_dqbuf		 = vpbe_display_dqbuf,
+	.vidioc_streamon	 = vpbe_display_streamon,
+	.vidioc_streamoff	 = vpbe_display_streamoff,
+	.vidioc_cropcap		 = vpbe_display_cropcap,
+	.vidioc_g_crop		 = vpbe_display_g_crop,
+	.vidioc_s_crop		 = vpbe_display_s_crop,
+	.vidioc_g_priority	 = vpbe_display_g_priority,
+	.vidioc_s_priority	 = vpbe_display_s_priority,
+	.vidioc_s_std		 = vpbe_display_s_std,
+	.vidioc_g_std		 = vpbe_display_g_std,
+	.vidioc_enum_output	 = vpbe_display_enum_output,
+	.vidioc_s_output	 = vpbe_display_s_output,
+	.vidioc_g_output	 = vpbe_display_g_output,
+	.vidioc_s_dv_preset	 = vpbe_display_s_dv_preset,
+	.vidioc_g_dv_preset	 = vpbe_display_g_dv_preset,
+	.vidioc_enum_dv_presets	 = vpbe_display_enum_dv_presets,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register	 = vpbe_display_g_register,
+	.vidioc_s_register	 = vpbe_display_s_register,
+#endif
+};
+
+static struct v4l2_file_operations vpbe_fops = {
+	.owner = THIS_MODULE,
+	.open = vpbe_display_open,
+	.release = vpbe_display_release,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap = vpbe_display_mmap,
+	.poll = vpbe_display_poll
+};
+
+static int vpbe_device_get(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct vpbe_display *vpbe_disp  = data;
+
+	if (strcmp("vpbe_controller", pdev->name) == 0)
+		vpbe_disp->vpbe_dev = platform_get_drvdata(pdev);
+
+	if (strcmp("vpbe-osd", pdev->name) == 0)
+		vpbe_disp->osd_device = platform_get_drvdata(pdev);
+
+	return 0;
+}
+
+static __devinit int init_vpbe_layer(int i, struct vpbe_display *disp_dev,
+				     struct platform_device *pdev)
+{
+	struct vpbe_layer *vpbe_display_layer = NULL;
+	struct video_device *vbd = NULL;
+
+	/* Allocate memory for four plane display objects */
+
+	disp_dev->dev[i] =
+		kzalloc(sizeof(struct vpbe_layer), GFP_KERNEL);
+
+	/* If memory allocation fails, return error */
+	if (!disp_dev->dev[i]) {
+		printk(KERN_ERR "ran out of memory\n");
+		return  -ENOMEM;
+	}
+	spin_lock_init(&disp_dev->dev[i]->irqlock);
+	mutex_init(&disp_dev->dev[i]->opslock);
+
+	/* Get the pointer to the layer object */
+	vpbe_display_layer = disp_dev->dev[i];
+	vbd = &vpbe_display_layer->video_dev;
+	/* Initialize field of video device */
+	vbd->release	= video_device_release_empty;
+	vbd->fops	= &vpbe_fops;
+	vbd->ioctl_ops	= &vpbe_ioctl_ops;
+	vbd->minor	= -1;
+	vbd->v4l2_dev   = &disp_dev->vpbe_dev->v4l2_dev;
+	vbd->lock	= &vpbe_display_layer->opslock;
+
+	if (disp_dev->vpbe_dev->current_timings.timings_type &
+			VPBE_ENC_STD) {
+		vbd->tvnorms = (V4L2_STD_525_60 | V4L2_STD_625_50);
+		vbd->current_norm =
+			disp_dev->vpbe_dev->
+			current_timings.timings.std_id;
+	} else
+		vbd->current_norm = 0;
+
+	snprintf(vbd->name, sizeof(vbd->name),
+			"DaVinci_VPBE Display_DRIVER_V%d.%d.%d",
+			(VPBE_DISPLAY_VERSION_CODE >> 16) & 0xff,
+			(VPBE_DISPLAY_VERSION_CODE >> 8) & 0xff,
+			(VPBE_DISPLAY_VERSION_CODE) & 0xff);
+
+	vpbe_display_layer->device_id = i;
+
+	vpbe_display_layer->layer_info.id =
+		((i == VPBE_DISPLAY_DEVICE_0) ? WIN_VID0 : WIN_VID1);
+
+	/* Initialize prio member of layer object */
+	v4l2_prio_init(&vpbe_display_layer->prio);
+
+	return 0;
+}
+
+static __devinit int register_device(struct vpbe_layer *vpbe_display_layer,
+					struct vpbe_display *disp_dev,
+					struct platform_device *pdev) {
+	int err;
+
+	v4l2_info(&disp_dev->vpbe_dev->v4l2_dev,
+		  "Trying to register VPBE display device.\n");
+	v4l2_info(&disp_dev->vpbe_dev->v4l2_dev,
+		  "layer=%x,layer->video_dev=%x\n",
+		  (int)vpbe_display_layer,
+		  (int)&vpbe_display_layer->video_dev);
+
+	err = video_register_device(&vpbe_display_layer->video_dev,
+				    VFL_TYPE_GRABBER,
+				    -1);
+	if (err)
+		return -ENODEV;
+
+	vpbe_display_layer->disp_dev = disp_dev;
+	/* set the driver data in platform device */
+	platform_set_drvdata(pdev, disp_dev);
+	video_set_drvdata(&vpbe_display_layer->video_dev,
+			  vpbe_display_layer);
+
+	return 0;
+}
+
+
+
+/*
+ * vpbe_display_probe()
+ * This function creates device entries by register itself to the V4L2 driver
+ * and initializes fields of each layer objects
+ */
+static __devinit int vpbe_display_probe(struct platform_device *pdev)
+{
+	struct vpbe_layer *vpbe_display_layer;
+	struct vpbe_display *disp_dev;
+	struct resource *res = NULL;
+	int k;
+	int i;
+	int err;
+	int irq;
+
+	printk(KERN_DEBUG "vpbe_display_probe\n");
+	/* Allocate memory for vpbe_display */
+	disp_dev = kzalloc(sizeof(struct vpbe_display), GFP_KERNEL);
+	if (!disp_dev) {
+		printk(KERN_ERR "ran out of memory\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&disp_dev->dma_queue_lock);
+	/*
+	 * Scan all the platform devices to find the vpbe
+	 * controller device and get the vpbe_dev object
+	 */
+	err = bus_for_each_dev(&platform_bus_type, NULL, disp_dev,
+			vpbe_device_get);
+	if (err < 0)
+		return err;
+	/* Initialize the vpbe display controller */
+	if (NULL != disp_dev->vpbe_dev->ops.initialize) {
+		err = disp_dev->vpbe_dev->ops.initialize(&pdev->dev,
+							 disp_dev->vpbe_dev);
+		if (err) {
+			v4l2_err(&disp_dev->vpbe_dev->v4l2_dev,
+					"Error initing vpbe\n");
+			err = -ENOMEM;
+			goto probe_out;
+		}
+	}
+
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		if (init_vpbe_layer(i, disp_dev, pdev)) {
+			err = -ENODEV;
+			goto probe_out;
+		}
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		v4l2_err(&disp_dev->vpbe_dev->v4l2_dev,
+			 "Unable to get VENC interrupt resource\n");
+		err = -ENODEV;
+		goto probe_out;
+	}
+
+	irq = res->start;
+	if (request_irq(irq, venc_isr,  IRQF_DISABLED, VPBE_DISPLAY_DRIVER,
+		disp_dev)) {
+		v4l2_err(&disp_dev->vpbe_dev->v4l2_dev,
+				"Unable to request interrupt\n");
+		err = -ENODEV;
+		goto probe_out;
+	}
+
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		if (register_device(disp_dev->dev[i], disp_dev, pdev)) {
+			err = -ENODEV;
+			goto probe_out;
+		}
+	}
+
+	printk(KERN_DEBUG "Successfully completed the probing of vpbe v4l2 device\n");
+	return 0;
+
+probe_out:
+	free_irq(res->start, disp_dev);
+	for (k = 0; k < VPBE_DISPLAY_MAX_DEVICES; k++) {
+		/* Get the pointer to the layer object */
+		vpbe_display_layer = disp_dev->dev[k];
+		/* Unregister video device */
+		if (vpbe_display_layer) {
+			video_unregister_device(
+				&vpbe_display_layer->video_dev);
+				kfree(disp_dev->dev[k]);
+		}
+	}
+	kfree(disp_dev);
+	return err;
+}
+
+/*
+ * vpbe_display_remove()
+ * It un-register hardware layer from V4L2 driver
+ */
+static int vpbe_display_remove(struct platform_device *pdev)
+{
+	struct vpbe_layer *vpbe_display_layer;
+	struct vpbe_display *disp_dev = platform_get_drvdata(pdev);
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct resource *res;
+	int i;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_remove\n");
+
+	/* unregister irq */
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	free_irq(res->start, disp_dev);
+
+	/* deinitialize the vpbe display controller */
+	if (NULL != vpbe_dev->ops.deinitialize)
+		vpbe_dev->ops.deinitialize(&pdev->dev, vpbe_dev);
+	/* un-register device */
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		/* Get the pointer to the layer object */
+		vpbe_display_layer = disp_dev->dev[i];
+		/* Unregister video device */
+		video_unregister_device(&vpbe_display_layer->video_dev);
+
+	}
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		kfree(disp_dev->dev[i]);
+		disp_dev->dev[i] = NULL;
+	}
+
+	return 0;
+}
+
+static struct platform_driver vpbe_display_driver = {
+	.driver = {
+		.name = VPBE_DISPLAY_DRIVER,
+		.owner = THIS_MODULE,
+		.bus = &platform_bus_type,
+	},
+	.probe = vpbe_display_probe,
+	.remove = __devexit_p(vpbe_display_remove),
+};
+
+/*
+ * vpbe_display_init()
+ * This function registers device and driver to the kernel, requests irq
+ * handler and allocates memory for layer objects
+ */
+static __devinit int vpbe_display_init(void)
+{
+	int err;
+
+	printk(KERN_DEBUG "vpbe_display_init\n");
+
+	/* Register driver to the kernel */
+	err = platform_driver_register(&vpbe_display_driver);
+	if (0 != err)
+		return err;
+
+	printk(KERN_DEBUG "vpbe_display_init:"
+			"VPBE V4L2 Display Driver V1.0 loaded\n");
+	return 0;
+}
+
+/*
+ * vpbe_display_cleanup()
+ * This function un-registers device and driver to the kernel, frees requested
+ * irq handler and de-allocates memory allocated for layer objects.
+ */
+static void vpbe_display_cleanup(void)
+{
+	printk(KERN_DEBUG "vpbe_display_cleanup\n");
+
+	/* platform driver unregister */
+	platform_driver_unregister(&vpbe_display_driver);
+}
+
+/* Function for module initialization and cleanup */
+module_init(vpbe_display_init);
+module_exit(vpbe_display_cleanup);
+
+MODULE_DESCRIPTION("TI DM644x/DM355/DM365 VPBE Display controller");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/video/davinci/vpbe_osd.c b/drivers/media/video/davinci/vpbe_osd.c
new file mode 100644
index 00000000000..5352884998f
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe_osd.c
@@ -0,0 +1,1231 @@
+/*
+ * Copyright (C) 2007-2010 Texas Instruments Inc
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Andy Lowe (alowe@mvista.com), MontaVista Software
+ * - Initial version
+ * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd.
+ * - ported to sub device interface
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+
+#include <mach/io.h>
+#include <mach/cputype.h>
+#include <mach/hardware.h>
+
+#include <media/davinci/vpss.h>
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe_osd.h>
+
+#include <linux/io.h>
+#include "vpbe_osd_regs.h"
+
+#define MODULE_NAME	VPBE_OSD_SUBDEV_NAME
+
+/* register access routines */
+static inline u32 osd_read(struct osd_state *sd, u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	return readl(osd->osd_base + offset);
+}
+
+static inline u32 osd_write(struct osd_state *sd, u32 val, u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	writel(val, osd->osd_base + offset);
+
+	return val;
+}
+
+static inline u32 osd_set(struct osd_state *sd, u32 mask, u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	u32 addr = osd->osd_base + offset;
+	u32 val = readl(addr) | mask;
+
+	writel(val, addr);
+
+	return val;
+}
+
+static inline u32 osd_clear(struct osd_state *sd, u32 mask, u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	u32 addr = osd->osd_base + offset;
+	u32 val = readl(addr) & ~mask;
+
+	writel(val, addr);
+
+	return val;
+}
+
+static inline u32 osd_modify(struct osd_state *sd, u32 mask, u32 val,
+				 u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	u32 addr = osd->osd_base + offset;
+	u32 new_val = (readl(addr) & ~mask) | (val & mask);
+
+	writel(new_val, addr);
+
+	return new_val;
+}
+
+/* define some macros for layer and pixfmt classification */
+#define is_osd_win(layer) (((layer) == WIN_OSD0) || ((layer) == WIN_OSD1))
+#define is_vid_win(layer) (((layer) == WIN_VID0) || ((layer) == WIN_VID1))
+#define is_rgb_pixfmt(pixfmt) \
+	(((pixfmt) == PIXFMT_RGB565) || ((pixfmt) == PIXFMT_RGB888))
+#define is_yc_pixfmt(pixfmt) \
+	(((pixfmt) == PIXFMT_YCbCrI) || ((pixfmt) == PIXFMT_YCrCbI) || \
+	((pixfmt) == PIXFMT_NV12))
+#define MAX_WIN_SIZE OSD_VIDWIN0XP_V0X
+#define MAX_LINE_LENGTH (OSD_VIDWIN0OFST_V0LO << 5)
+
+/**
+ * _osd_dm6446_vid0_pingpong() - field inversion fix for DM6446
+ * @sd - ptr to struct osd_state
+ * @field_inversion - inversion flag
+ * @fb_base_phys - frame buffer address
+ * @lconfig - ptr to layer config
+ *
+ * This routine implements a workaround for the field signal inversion silicon
+ * erratum described in Advisory 1.3.8 for the DM6446.  The fb_base_phys and
+ * lconfig parameters apply to the vid0 window.  This routine should be called
+ * whenever the vid0 layer configuration or start address is modified, or when
+ * the OSD field inversion setting is modified.
+ * Returns: 1 if the ping-pong buffers need to be toggled in the vsync isr, or
+ *          0 otherwise
+ */
+static int _osd_dm6446_vid0_pingpong(struct osd_state *sd,
+				     int field_inversion,
+				     unsigned long fb_base_phys,
+				     const struct osd_layer_config *lconfig)
+{
+	struct osd_platform_data *pdata;
+
+	pdata = (struct osd_platform_data *)sd->dev->platform_data;
+	if (pdata->field_inv_wa_enable) {
+
+		if (!field_inversion || !lconfig->interlaced) {
+			osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR);
+			osd_write(sd, fb_base_phys & ~0x1F, OSD_PPVWIN0ADR);
+			osd_modify(sd, OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, 0,
+				   OSD_MISCCTL);
+			return 0;
+		} else {
+			unsigned miscctl = OSD_MISCCTL_PPRV;
+
+			osd_write(sd,
+				(fb_base_phys & ~0x1F) - lconfig->line_length,
+				OSD_VIDWIN0ADR);
+			osd_write(sd,
+				(fb_base_phys & ~0x1F) + lconfig->line_length,
+				OSD_PPVWIN0ADR);
+			osd_modify(sd,
+				OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, miscctl,
+				OSD_MISCCTL);
+
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static void _osd_set_field_inversion(struct osd_state *sd, int enable)
+{
+	unsigned fsinv = 0;
+
+	if (enable)
+		fsinv = OSD_MODE_FSINV;
+
+	osd_modify(sd, OSD_MODE_FSINV, fsinv, OSD_MODE);
+}
+
+static void _osd_set_blink_attribute(struct osd_state *sd, int enable,
+				     enum osd_blink_interval blink)
+{
+	u32 osdatrmd = 0;
+
+	if (enable) {
+		osdatrmd |= OSD_OSDATRMD_BLNK;
+		osdatrmd |= blink << OSD_OSDATRMD_BLNKINT_SHIFT;
+	}
+	/* caller must ensure that OSD1 is configured in attribute mode */
+	osd_modify(sd, OSD_OSDATRMD_BLNKINT | OSD_OSDATRMD_BLNK, osdatrmd,
+		  OSD_OSDATRMD);
+}
+
+static void _osd_set_rom_clut(struct osd_state *sd,
+			      enum osd_rom_clut rom_clut)
+{
+	if (rom_clut == ROM_CLUT0)
+		osd_clear(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL);
+	else
+		osd_set(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL);
+}
+
+static void _osd_set_palette_map(struct osd_state *sd,
+				 enum osd_win_layer osdwin,
+				 unsigned char pixel_value,
+				 unsigned char clut_index,
+				 enum osd_pix_format pixfmt)
+{
+	static const int map_2bpp[] = { 0, 5, 10, 15 };
+	static const int map_1bpp[] = { 0, 15 };
+	int bmp_offset;
+	int bmp_shift;
+	int bmp_mask;
+	int bmp_reg;
+
+	switch (pixfmt) {
+	case PIXFMT_1BPP:
+		bmp_reg = map_1bpp[pixel_value & 0x1];
+		break;
+	case PIXFMT_2BPP:
+		bmp_reg = map_2bpp[pixel_value & 0x3];
+		break;
+	case PIXFMT_4BPP:
+		bmp_reg = pixel_value & 0xf;
+		break;
+	default:
+		return;
+	}
+
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		bmp_offset = OSD_W0BMP01 + (bmp_reg >> 1) * sizeof(u32);
+		break;
+	case OSDWIN_OSD1:
+		bmp_offset = OSD_W1BMP01 + (bmp_reg >> 1) * sizeof(u32);
+		break;
+	default:
+		return;
+	}
+
+	if (bmp_reg & 1) {
+		bmp_shift = 8;
+		bmp_mask = 0xff << 8;
+	} else {
+		bmp_shift = 0;
+		bmp_mask = 0xff;
+	}
+
+	osd_modify(sd, bmp_mask, clut_index << bmp_shift, bmp_offset);
+}
+
+static void _osd_set_rec601_attenuation(struct osd_state *sd,
+					enum osd_win_layer osdwin, int enable)
+{
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_modify(sd, OSD_OSDWIN0MD_ATN0E,
+			  enable ? OSD_OSDWIN0MD_ATN0E : 0,
+			  OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		osd_modify(sd, OSD_OSDWIN1MD_ATN1E,
+			  enable ? OSD_OSDWIN1MD_ATN1E : 0,
+			  OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_set_blending_factor(struct osd_state *sd,
+				     enum osd_win_layer osdwin,
+				     enum osd_blending_factor blend)
+{
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_modify(sd, OSD_OSDWIN0MD_BLND0,
+			  blend << OSD_OSDWIN0MD_BLND0_SHIFT, OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		osd_modify(sd, OSD_OSDWIN1MD_BLND1,
+			  blend << OSD_OSDWIN1MD_BLND1_SHIFT, OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_enable_color_key(struct osd_state *sd,
+				  enum osd_win_layer osdwin,
+				  unsigned colorkey,
+				  enum osd_pix_format pixfmt)
+{
+	switch (pixfmt) {
+	case PIXFMT_RGB565:
+		osd_write(sd, colorkey & OSD_TRANSPVAL_RGBTRANS,
+			  OSD_TRANSPVAL);
+		break;
+	default:
+		break;
+	}
+
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_set(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		osd_set(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_disable_color_key(struct osd_state *sd,
+				   enum osd_win_layer osdwin)
+{
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_clear(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		osd_clear(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_set_osd_clut(struct osd_state *sd,
+			      enum osd_win_layer osdwin,
+			      enum osd_clut clut)
+{
+	u32 winmd = 0;
+
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		if (clut == RAM_CLUT)
+			winmd |= OSD_OSDWIN0MD_CLUTS0;
+		osd_modify(sd, OSD_OSDWIN0MD_CLUTS0, winmd, OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		if (clut == RAM_CLUT)
+			winmd |= OSD_OSDWIN1MD_CLUTS1;
+		osd_modify(sd, OSD_OSDWIN1MD_CLUTS1, winmd, OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_set_zoom(struct osd_state *sd, enum osd_layer layer,
+			  enum osd_zoom_factor h_zoom,
+			  enum osd_zoom_factor v_zoom)
+{
+	u32 winmd = 0;
+
+	switch (layer) {
+	case WIN_OSD0:
+		winmd |= (h_zoom << OSD_OSDWIN0MD_OHZ0_SHIFT);
+		winmd |= (v_zoom << OSD_OSDWIN0MD_OVZ0_SHIFT);
+		osd_modify(sd, OSD_OSDWIN0MD_OHZ0 | OSD_OSDWIN0MD_OVZ0, winmd,
+			  OSD_OSDWIN0MD);
+		break;
+	case WIN_VID0:
+		winmd |= (h_zoom << OSD_VIDWINMD_VHZ0_SHIFT);
+		winmd |= (v_zoom << OSD_VIDWINMD_VVZ0_SHIFT);
+		osd_modify(sd, OSD_VIDWINMD_VHZ0 | OSD_VIDWINMD_VVZ0, winmd,
+			  OSD_VIDWINMD);
+		break;
+	case WIN_OSD1:
+		winmd |= (h_zoom << OSD_OSDWIN1MD_OHZ1_SHIFT);
+		winmd |= (v_zoom << OSD_OSDWIN1MD_OVZ1_SHIFT);
+		osd_modify(sd, OSD_OSDWIN1MD_OHZ1 | OSD_OSDWIN1MD_OVZ1, winmd,
+			  OSD_OSDWIN1MD);
+		break;
+	case WIN_VID1:
+		winmd |= (h_zoom << OSD_VIDWINMD_VHZ1_SHIFT);
+		winmd |= (v_zoom << OSD_VIDWINMD_VVZ1_SHIFT);
+		osd_modify(sd, OSD_VIDWINMD_VHZ1 | OSD_VIDWINMD_VVZ1, winmd,
+			  OSD_VIDWINMD);
+		break;
+	}
+}
+
+static void _osd_disable_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	switch (layer) {
+	case WIN_OSD0:
+		osd_clear(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD);
+		break;
+	case WIN_VID0:
+		osd_clear(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD);
+		break;
+	case WIN_OSD1:
+		/* disable attribute mode as well as disabling the window */
+		osd_clear(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1,
+			  OSD_OSDWIN1MD);
+		break;
+	case WIN_VID1:
+		osd_clear(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD);
+		break;
+	}
+}
+
+static void osd_disable_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	if (!win->is_enabled) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return;
+	}
+	win->is_enabled = 0;
+
+	_osd_disable_layer(sd, layer);
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+static void _osd_enable_attribute_mode(struct osd_state *sd)
+{
+	/* enable attribute mode for OSD1 */
+	osd_set(sd, OSD_OSDWIN1MD_OASW, OSD_OSDWIN1MD);
+}
+
+static void _osd_enable_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	switch (layer) {
+	case WIN_OSD0:
+		osd_set(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD);
+		break;
+	case WIN_VID0:
+		osd_set(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD);
+		break;
+	case WIN_OSD1:
+		/* enable OSD1 and disable attribute mode */
+		osd_modify(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1,
+			  OSD_OSDWIN1MD_OACT1, OSD_OSDWIN1MD);
+		break;
+	case WIN_VID1:
+		osd_set(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD);
+		break;
+	}
+}
+
+static int osd_enable_layer(struct osd_state *sd, enum osd_layer layer,
+			    int otherwin)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	struct osd_layer_config *cfg = &win->lconfig;
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	/*
+	 * use otherwin flag to know this is the other vid window
+	 * in YUV420 mode, if is, skip this check
+	 */
+	if (!otherwin && (!win->is_allocated ||
+			!win->fb_base_phys ||
+			!cfg->line_length ||
+			!cfg->xsize ||
+			!cfg->ysize)) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return -1;
+	}
+
+	if (win->is_enabled) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return 0;
+	}
+	win->is_enabled = 1;
+
+	if (cfg->pixfmt != PIXFMT_OSD_ATTR)
+		_osd_enable_layer(sd, layer);
+	else {
+		_osd_enable_attribute_mode(sd);
+		_osd_set_blink_attribute(sd, osd->is_blinking, osd->blink);
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+
+	return 0;
+}
+
+static void _osd_start_layer(struct osd_state *sd, enum osd_layer layer,
+			     unsigned long fb_base_phys,
+			     unsigned long cbcr_ofst)
+{
+	switch (layer) {
+	case WIN_OSD0:
+		osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN0ADR);
+		break;
+	case WIN_VID0:
+		osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR);
+		break;
+	case WIN_OSD1:
+		osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN1ADR);
+		break;
+	case WIN_VID1:
+		osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN1ADR);
+		break;
+	}
+}
+
+static void osd_start_layer(struct osd_state *sd, enum osd_layer layer,
+			    unsigned long fb_base_phys,
+			    unsigned long cbcr_ofst)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	struct osd_layer_config *cfg = &win->lconfig;
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	win->fb_base_phys = fb_base_phys & ~0x1F;
+	_osd_start_layer(sd, layer, fb_base_phys, cbcr_ofst);
+
+	if (layer == WIN_VID0) {
+		osd->pingpong =
+		    _osd_dm6446_vid0_pingpong(sd, osd->field_inversion,
+						       win->fb_base_phys,
+						       cfg);
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+static void osd_get_layer_config(struct osd_state *sd, enum osd_layer layer,
+				 struct osd_layer_config *lconfig)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	*lconfig = win->lconfig;
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+/**
+ * try_layer_config() - Try a specific configuration for the layer
+ * @sd  - ptr to struct osd_state
+ * @layer - layer to configure
+ * @lconfig - layer configuration to try
+ *
+ * If the requested lconfig is completely rejected and the value of lconfig on
+ * exit is the current lconfig, then try_layer_config() returns 1.  Otherwise,
+ * try_layer_config() returns 0.  A return value of 0 does not necessarily mean
+ * that the value of lconfig on exit is identical to the value of lconfig on
+ * entry, but merely that it represents a change from the current lconfig.
+ */
+static int try_layer_config(struct osd_state *sd, enum osd_layer layer,
+			    struct osd_layer_config *lconfig)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	int bad_config;
+
+	/* verify that the pixel format is compatible with the layer */
+	switch (lconfig->pixfmt) {
+	case PIXFMT_1BPP:
+	case PIXFMT_2BPP:
+	case PIXFMT_4BPP:
+	case PIXFMT_8BPP:
+	case PIXFMT_RGB565:
+		bad_config = !is_osd_win(layer);
+		break;
+	case PIXFMT_YCbCrI:
+	case PIXFMT_YCrCbI:
+		bad_config = !is_vid_win(layer);
+		break;
+	case PIXFMT_RGB888:
+		bad_config = !is_vid_win(layer);
+		break;
+	case PIXFMT_NV12:
+		bad_config = 1;
+		break;
+	case PIXFMT_OSD_ATTR:
+		bad_config = (layer != WIN_OSD1);
+		break;
+	default:
+		bad_config = 1;
+		break;
+	}
+	if (bad_config) {
+		/*
+		 * The requested pixel format is incompatible with the layer,
+		 * so keep the current layer configuration.
+		 */
+		*lconfig = win->lconfig;
+		return bad_config;
+	}
+
+	/* DM6446: */
+	/* only one OSD window at a time can use RGB pixel formats */
+	if (is_osd_win(layer) && is_rgb_pixfmt(lconfig->pixfmt)) {
+		enum osd_pix_format pixfmt;
+		if (layer == WIN_OSD0)
+			pixfmt = osd->win[WIN_OSD1].lconfig.pixfmt;
+		else
+			pixfmt = osd->win[WIN_OSD0].lconfig.pixfmt;
+
+		if (is_rgb_pixfmt(pixfmt)) {
+			/*
+			 * The other OSD window is already configured for an
+			 * RGB, so keep the current layer configuration.
+			 */
+			*lconfig = win->lconfig;
+			return 1;
+		}
+	}
+
+	/* DM6446: only one video window at a time can use RGB888 */
+	if (is_vid_win(layer) && lconfig->pixfmt == PIXFMT_RGB888) {
+		enum osd_pix_format pixfmt;
+
+		if (layer == WIN_VID0)
+			pixfmt = osd->win[WIN_VID1].lconfig.pixfmt;
+		else
+			pixfmt = osd->win[WIN_VID0].lconfig.pixfmt;
+
+		if (pixfmt == PIXFMT_RGB888) {
+			/*
+			 * The other video window is already configured for
+			 * RGB888, so keep the current layer configuration.
+			 */
+			*lconfig = win->lconfig;
+			return 1;
+		}
+	}
+
+	/* window dimensions must be non-zero */
+	if (!lconfig->line_length || !lconfig->xsize || !lconfig->ysize) {
+		*lconfig = win->lconfig;
+		return 1;
+	}
+
+	/* round line_length up to a multiple of 32 */
+	lconfig->line_length = ((lconfig->line_length + 31) / 32) * 32;
+	lconfig->line_length =
+	    min(lconfig->line_length, (unsigned)MAX_LINE_LENGTH);
+	lconfig->xsize = min(lconfig->xsize, (unsigned)MAX_WIN_SIZE);
+	lconfig->ysize = min(lconfig->ysize, (unsigned)MAX_WIN_SIZE);
+	lconfig->xpos = min(lconfig->xpos, (unsigned)MAX_WIN_SIZE);
+	lconfig->ypos = min(lconfig->ypos, (unsigned)MAX_WIN_SIZE);
+	lconfig->interlaced = (lconfig->interlaced != 0);
+	if (lconfig->interlaced) {
+		/* ysize and ypos must be even for interlaced displays */
+		lconfig->ysize &= ~1;
+		lconfig->ypos &= ~1;
+	}
+
+	return 0;
+}
+
+static void _osd_disable_vid_rgb888(struct osd_state *sd)
+{
+	/*
+	 * The DM6446 supports RGB888 pixel format in a single video window.
+	 * This routine disables RGB888 pixel format for both video windows.
+	 * The caller must ensure that neither video window is currently
+	 * configured for RGB888 pixel format.
+	 */
+	osd_clear(sd, OSD_MISCCTL_RGBEN, OSD_MISCCTL);
+}
+
+static void _osd_enable_vid_rgb888(struct osd_state *sd,
+				   enum osd_layer layer)
+{
+	/*
+	 * The DM6446 supports RGB888 pixel format in a single video window.
+	 * This routine enables RGB888 pixel format for the specified video
+	 * window.  The caller must ensure that the other video window is not
+	 * currently configured for RGB888 pixel format, as this routine will
+	 * disable RGB888 pixel format for the other window.
+	 */
+	if (layer == WIN_VID0) {
+		osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
+			  OSD_MISCCTL_RGBEN, OSD_MISCCTL);
+	} else if (layer == WIN_VID1) {
+		osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
+			  OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
+			  OSD_MISCCTL);
+	}
+}
+
+static void _osd_set_cbcr_order(struct osd_state *sd,
+				enum osd_pix_format pixfmt)
+{
+	/*
+	 * The caller must ensure that all windows using YC pixfmt use the same
+	 * Cb/Cr order.
+	 */
+	if (pixfmt == PIXFMT_YCbCrI)
+		osd_clear(sd, OSD_MODE_CS, OSD_MODE);
+	else if (pixfmt == PIXFMT_YCrCbI)
+		osd_set(sd, OSD_MODE_CS, OSD_MODE);
+}
+
+static void _osd_set_layer_config(struct osd_state *sd, enum osd_layer layer,
+				  const struct osd_layer_config *lconfig)
+{
+	u32 winmd = 0, winmd_mask = 0, bmw = 0;
+
+	_osd_set_cbcr_order(sd, lconfig->pixfmt);
+
+	switch (layer) {
+	case WIN_OSD0:
+		winmd_mask |= OSD_OSDWIN0MD_RGB0E;
+		if (lconfig->pixfmt == PIXFMT_RGB565)
+			winmd |= OSD_OSDWIN0MD_RGB0E;
+
+		winmd_mask |= OSD_OSDWIN0MD_BMW0 | OSD_OSDWIN0MD_OFF0;
+
+		switch (lconfig->pixfmt) {
+		case PIXFMT_1BPP:
+			bmw = 0;
+			break;
+		case PIXFMT_2BPP:
+			bmw = 1;
+			break;
+		case PIXFMT_4BPP:
+			bmw = 2;
+			break;
+		case PIXFMT_8BPP:
+			bmw = 3;
+			break;
+		default:
+			break;
+		}
+		winmd |= (bmw << OSD_OSDWIN0MD_BMW0_SHIFT);
+
+		if (lconfig->interlaced)
+			winmd |= OSD_OSDWIN0MD_OFF0;
+
+		osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN0MD);
+		osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN0OFST);
+		osd_write(sd, lconfig->xpos, OSD_OSDWIN0XP);
+		osd_write(sd, lconfig->xsize, OSD_OSDWIN0XL);
+		if (lconfig->interlaced) {
+			osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN0YP);
+			osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN0YL);
+		} else {
+			osd_write(sd, lconfig->ypos, OSD_OSDWIN0YP);
+			osd_write(sd, lconfig->ysize, OSD_OSDWIN0YL);
+		}
+		break;
+	case WIN_VID0:
+		winmd_mask |= OSD_VIDWINMD_VFF0;
+		if (lconfig->interlaced)
+			winmd |= OSD_VIDWINMD_VFF0;
+
+		osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD);
+		osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN0OFST);
+		osd_write(sd, lconfig->xpos, OSD_VIDWIN0XP);
+		osd_write(sd, lconfig->xsize, OSD_VIDWIN0XL);
+		/*
+		 * For YUV420P format the register contents are
+		 * duplicated in both VID registers
+		 */
+		if (lconfig->interlaced) {
+			osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN0YP);
+			osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN0YL);
+		} else {
+			osd_write(sd, lconfig->ypos, OSD_VIDWIN0YP);
+			osd_write(sd, lconfig->ysize, OSD_VIDWIN0YL);
+		}
+		break;
+	case WIN_OSD1:
+		/*
+		 * The caller must ensure that OSD1 is disabled prior to
+		 * switching from a normal mode to attribute mode or from
+		 * attribute mode to a normal mode.
+		 */
+		if (lconfig->pixfmt == PIXFMT_OSD_ATTR) {
+			winmd_mask |=
+			    OSD_OSDWIN1MD_ATN1E | OSD_OSDWIN1MD_RGB1E |
+			    OSD_OSDWIN1MD_CLUTS1 |
+			    OSD_OSDWIN1MD_BLND1 | OSD_OSDWIN1MD_TE1;
+		} else {
+			winmd_mask |= OSD_OSDWIN1MD_RGB1E;
+			if (lconfig->pixfmt == PIXFMT_RGB565)
+				winmd |= OSD_OSDWIN1MD_RGB1E;
+
+			winmd_mask |= OSD_OSDWIN1MD_BMW1;
+			switch (lconfig->pixfmt) {
+			case PIXFMT_1BPP:
+				bmw = 0;
+				break;
+			case PIXFMT_2BPP:
+				bmw = 1;
+				break;
+			case PIXFMT_4BPP:
+				bmw = 2;
+				break;
+			case PIXFMT_8BPP:
+				bmw = 3;
+				break;
+			default:
+				break;
+			}
+			winmd |= (bmw << OSD_OSDWIN1MD_BMW1_SHIFT);
+		}
+
+		winmd_mask |= OSD_OSDWIN1MD_OFF1;
+		if (lconfig->interlaced)
+			winmd |= OSD_OSDWIN1MD_OFF1;
+
+		osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN1MD);
+		osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN1OFST);
+		osd_write(sd, lconfig->xpos, OSD_OSDWIN1XP);
+		osd_write(sd, lconfig->xsize, OSD_OSDWIN1XL);
+		if (lconfig->interlaced) {
+			osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN1YP);
+			osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN1YL);
+		} else {
+			osd_write(sd, lconfig->ypos, OSD_OSDWIN1YP);
+			osd_write(sd, lconfig->ysize, OSD_OSDWIN1YL);
+		}
+		break;
+	case WIN_VID1:
+		winmd_mask |= OSD_VIDWINMD_VFF1;
+		if (lconfig->interlaced)
+			winmd |= OSD_VIDWINMD_VFF1;
+
+		osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD);
+		osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN1OFST);
+		osd_write(sd, lconfig->xpos, OSD_VIDWIN1XP);
+		osd_write(sd, lconfig->xsize, OSD_VIDWIN1XL);
+		/*
+		 * For YUV420P format the register contents are
+		 * duplicated in both VID registers
+		 */
+		osd_modify(sd, OSD_MISCCTL_S420D, ~OSD_MISCCTL_S420D,
+			   OSD_MISCCTL);
+
+		if (lconfig->interlaced) {
+			osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN1YP);
+			osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN1YL);
+		} else {
+			osd_write(sd, lconfig->ypos, OSD_VIDWIN1YP);
+			osd_write(sd, lconfig->ysize, OSD_VIDWIN1YL);
+		}
+		break;
+	}
+}
+
+static int osd_set_layer_config(struct osd_state *sd, enum osd_layer layer,
+				struct osd_layer_config *lconfig)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	struct osd_layer_config *cfg = &win->lconfig;
+	unsigned long flags;
+	int reject_config;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	reject_config = try_layer_config(sd, layer, lconfig);
+	if (reject_config) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return reject_config;
+	}
+
+	/* update the current Cb/Cr order */
+	if (is_yc_pixfmt(lconfig->pixfmt))
+		osd->yc_pixfmt = lconfig->pixfmt;
+
+	/*
+	 * If we are switching OSD1 from normal mode to attribute mode or from
+	 * attribute mode to normal mode, then we must disable the window.
+	 */
+	if (layer == WIN_OSD1) {
+		if (((lconfig->pixfmt == PIXFMT_OSD_ATTR) &&
+		  (cfg->pixfmt != PIXFMT_OSD_ATTR)) ||
+		  ((lconfig->pixfmt != PIXFMT_OSD_ATTR) &&
+		  (cfg->pixfmt == PIXFMT_OSD_ATTR))) {
+			win->is_enabled = 0;
+			_osd_disable_layer(sd, layer);
+		}
+	}
+
+	_osd_set_layer_config(sd, layer, lconfig);
+
+	if (layer == WIN_OSD1) {
+		struct osd_osdwin_state *osdwin_state =
+		    &osd->osdwin[OSDWIN_OSD1];
+
+		if ((lconfig->pixfmt != PIXFMT_OSD_ATTR) &&
+		  (cfg->pixfmt == PIXFMT_OSD_ATTR)) {
+			/*
+			 * We just switched OSD1 from attribute mode to normal
+			 * mode, so we must initialize the CLUT select, the
+			 * blend factor, transparency colorkey enable, and
+			 * attenuation enable (DM6446 only) bits in the
+			 * OSDWIN1MD register.
+			 */
+			_osd_set_osd_clut(sd, OSDWIN_OSD1,
+						   osdwin_state->clut);
+			_osd_set_blending_factor(sd, OSDWIN_OSD1,
+							  osdwin_state->blend);
+			if (osdwin_state->colorkey_blending) {
+				_osd_enable_color_key(sd, OSDWIN_OSD1,
+							       osdwin_state->
+							       colorkey,
+							       lconfig->pixfmt);
+			} else
+				_osd_disable_color_key(sd, OSDWIN_OSD1);
+			_osd_set_rec601_attenuation(sd, OSDWIN_OSD1,
+						    osdwin_state->
+						    rec601_attenuation);
+		} else if ((lconfig->pixfmt == PIXFMT_OSD_ATTR) &&
+		  (cfg->pixfmt != PIXFMT_OSD_ATTR)) {
+			/*
+			 * We just switched OSD1 from normal mode to attribute
+			 * mode, so we must initialize the blink enable and
+			 * blink interval bits in the OSDATRMD register.
+			 */
+			_osd_set_blink_attribute(sd, osd->is_blinking,
+							  osd->blink);
+		}
+	}
+
+	/*
+	 * If we just switched to a 1-, 2-, or 4-bits-per-pixel bitmap format
+	 * then configure a default palette map.
+	 */
+	if ((lconfig->pixfmt != cfg->pixfmt) &&
+	  ((lconfig->pixfmt == PIXFMT_1BPP) ||
+	  (lconfig->pixfmt == PIXFMT_2BPP) ||
+	  (lconfig->pixfmt == PIXFMT_4BPP))) {
+		enum osd_win_layer osdwin =
+		    ((layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1);
+		struct osd_osdwin_state *osdwin_state =
+		    &osd->osdwin[osdwin];
+		unsigned char clut_index;
+		unsigned char clut_entries = 0;
+
+		switch (lconfig->pixfmt) {
+		case PIXFMT_1BPP:
+			clut_entries = 2;
+			break;
+		case PIXFMT_2BPP:
+			clut_entries = 4;
+			break;
+		case PIXFMT_4BPP:
+			clut_entries = 16;
+			break;
+		default:
+			break;
+		}
+		/*
+		 * The default palette map maps the pixel value to the clut
+		 * index, i.e. pixel value 0 maps to clut entry 0, pixel value
+		 * 1 maps to clut entry 1, etc.
+		 */
+		for (clut_index = 0; clut_index < 16; clut_index++) {
+			osdwin_state->palette_map[clut_index] = clut_index;
+			if (clut_index < clut_entries) {
+				_osd_set_palette_map(sd, osdwin, clut_index,
+						     clut_index,
+						     lconfig->pixfmt);
+			}
+		}
+	}
+
+	*cfg = *lconfig;
+	/* DM6446: configure the RGB888 enable and window selection */
+	if (osd->win[WIN_VID0].lconfig.pixfmt == PIXFMT_RGB888)
+		_osd_enable_vid_rgb888(sd, WIN_VID0);
+	else if (osd->win[WIN_VID1].lconfig.pixfmt == PIXFMT_RGB888)
+		_osd_enable_vid_rgb888(sd, WIN_VID1);
+	else
+		_osd_disable_vid_rgb888(sd);
+
+	if (layer == WIN_VID0) {
+		osd->pingpong =
+		    _osd_dm6446_vid0_pingpong(sd, osd->field_inversion,
+						       win->fb_base_phys,
+						       cfg);
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+
+	return 0;
+}
+
+static void osd_init_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	enum osd_win_layer osdwin;
+	struct osd_osdwin_state *osdwin_state;
+	struct osd_layer_config *cfg = &win->lconfig;
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	win->is_enabled = 0;
+	_osd_disable_layer(sd, layer);
+
+	win->h_zoom = ZOOM_X1;
+	win->v_zoom = ZOOM_X1;
+	_osd_set_zoom(sd, layer, win->h_zoom, win->v_zoom);
+
+	win->fb_base_phys = 0;
+	_osd_start_layer(sd, layer, win->fb_base_phys, 0);
+
+	cfg->line_length = 0;
+	cfg->xsize = 0;
+	cfg->ysize = 0;
+	cfg->xpos = 0;
+	cfg->ypos = 0;
+	cfg->interlaced = 0;
+	switch (layer) {
+	case WIN_OSD0:
+	case WIN_OSD1:
+		osdwin = (layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1;
+		osdwin_state = &osd->osdwin[osdwin];
+		/*
+		 * Other code relies on the fact that OSD windows default to a
+		 * bitmap pixel format when they are deallocated, so don't
+		 * change this default pixel format.
+		 */
+		cfg->pixfmt = PIXFMT_8BPP;
+		_osd_set_layer_config(sd, layer, cfg);
+		osdwin_state->clut = RAM_CLUT;
+		_osd_set_osd_clut(sd, osdwin, osdwin_state->clut);
+		osdwin_state->colorkey_blending = 0;
+		_osd_disable_color_key(sd, osdwin);
+		osdwin_state->blend = OSD_8_VID_0;
+		_osd_set_blending_factor(sd, osdwin, osdwin_state->blend);
+		osdwin_state->rec601_attenuation = 0;
+		_osd_set_rec601_attenuation(sd, osdwin,
+						     osdwin_state->
+						     rec601_attenuation);
+		if (osdwin == OSDWIN_OSD1) {
+			osd->is_blinking = 0;
+			osd->blink = BLINK_X1;
+		}
+		break;
+	case WIN_VID0:
+	case WIN_VID1:
+		cfg->pixfmt = osd->yc_pixfmt;
+		_osd_set_layer_config(sd, layer, cfg);
+		break;
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+static void osd_release_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	if (!win->is_allocated) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return;
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+	osd_init_layer(sd, layer);
+	spin_lock_irqsave(&osd->lock, flags);
+
+	win->is_allocated = 0;
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+static int osd_request_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	if (win->is_allocated) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return -1;
+	}
+	win->is_allocated = 1;
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+
+	return 0;
+}
+
+static void _osd_init(struct osd_state *sd)
+{
+	osd_write(sd, 0, OSD_MODE);
+	osd_write(sd, 0, OSD_VIDWINMD);
+	osd_write(sd, 0, OSD_OSDWIN0MD);
+	osd_write(sd, 0, OSD_OSDWIN1MD);
+	osd_write(sd, 0, OSD_RECTCUR);
+	osd_write(sd, 0, OSD_MISCCTL);
+}
+
+static void osd_set_left_margin(struct osd_state *sd, u32 val)
+{
+	osd_write(sd, val, OSD_BASEPX);
+}
+
+static void osd_set_top_margin(struct osd_state *sd, u32 val)
+{
+	osd_write(sd, val, OSD_BASEPY);
+}
+
+static int osd_initialize(struct osd_state *osd)
+{
+	if (osd == NULL)
+		return -ENODEV;
+	_osd_init(osd);
+
+	/* set default Cb/Cr order */
+	osd->yc_pixfmt = PIXFMT_YCbCrI;
+
+	_osd_set_field_inversion(osd, osd->field_inversion);
+	_osd_set_rom_clut(osd, osd->rom_clut);
+
+	osd_init_layer(osd, WIN_OSD0);
+	osd_init_layer(osd, WIN_VID0);
+	osd_init_layer(osd, WIN_OSD1);
+	osd_init_layer(osd, WIN_VID1);
+
+	return 0;
+}
+
+static const struct vpbe_osd_ops osd_ops = {
+	.initialize = osd_initialize,
+	.request_layer = osd_request_layer,
+	.release_layer = osd_release_layer,
+	.enable_layer = osd_enable_layer,
+	.disable_layer = osd_disable_layer,
+	.set_layer_config = osd_set_layer_config,
+	.get_layer_config = osd_get_layer_config,
+	.start_layer = osd_start_layer,
+	.set_left_margin = osd_set_left_margin,
+	.set_top_margin = osd_set_top_margin,
+};
+
+static int osd_probe(struct platform_device *pdev)
+{
+	struct osd_platform_data *pdata;
+	struct osd_state *osd;
+	struct resource *res;
+	int ret = 0;
+
+	osd = kzalloc(sizeof(struct osd_state), GFP_KERNEL);
+	if (osd == NULL)
+		return -ENOMEM;
+
+	osd->dev = &pdev->dev;
+	pdata = (struct osd_platform_data *)pdev->dev.platform_data;
+	osd->vpbe_type = (enum vpbe_version)pdata->vpbe_type;
+	if (NULL == pdev->dev.platform_data) {
+		dev_err(osd->dev, "No platform data defined for OSD"
+			" sub device\n");
+		ret = -ENOENT;
+		goto free_mem;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(osd->dev, "Unable to get OSD register address map\n");
+		ret = -ENODEV;
+		goto free_mem;
+	}
+	osd->osd_base_phys = res->start;
+	osd->osd_size = res->end - res->start + 1;
+	if (!request_mem_region(osd->osd_base_phys, osd->osd_size,
+				MODULE_NAME)) {
+		dev_err(osd->dev, "Unable to reserve OSD MMIO region\n");
+		ret = -ENODEV;
+		goto free_mem;
+	}
+	osd->osd_base = (unsigned long)ioremap_nocache(res->start,
+							osd->osd_size);
+	if (!osd->osd_base) {
+		dev_err(osd->dev, "Unable to map the OSD region\n");
+		ret = -ENODEV;
+		goto release_mem_region;
+	}
+	spin_lock_init(&osd->lock);
+	osd->ops = osd_ops;
+	platform_set_drvdata(pdev, osd);
+	dev_notice(osd->dev, "OSD sub device probe success\n");
+	return ret;
+
+release_mem_region:
+	release_mem_region(osd->osd_base_phys, osd->osd_size);
+free_mem:
+	kfree(osd);
+	return ret;
+}
+
+static int osd_remove(struct platform_device *pdev)
+{
+	struct osd_state *osd = platform_get_drvdata(pdev);
+
+	iounmap((void *)osd->osd_base);
+	release_mem_region(osd->osd_base_phys, osd->osd_size);
+	kfree(osd);
+	return 0;
+}
+
+static struct platform_driver osd_driver = {
+	.probe		= osd_probe,
+	.remove		= osd_remove,
+	.driver		= {
+		.name	= MODULE_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int osd_init(void)
+{
+	if (platform_driver_register(&osd_driver)) {
+		printk(KERN_ERR "Unable to register davinci osd driver\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void osd_exit(void)
+{
+	platform_driver_unregister(&osd_driver);
+}
+
+module_init(osd_init);
+module_exit(osd_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DaVinci OSD Manager Driver");
+MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/video/davinci/vpbe_osd_regs.h b/drivers/media/video/davinci/vpbe_osd_regs.h
new file mode 100644
index 00000000000..584520f3af6
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe_osd_regs.h
@@ -0,0 +1,364 @@
+/*
+ * Copyright (C) 2006-2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_OSD_REGS_H
+#define _VPBE_OSD_REGS_H
+
+/* VPBE Global Registers */
+#define VPBE_PID				0x0
+#define VPBE_PCR				0x4
+
+/* VPSS CLock Registers */
+#define VPSSCLK_PID				0x00
+#define VPSSCLK_CLKCTRL				0x04
+
+/* VPSS Buffer Logic Registers */
+#define VPSSBL_PID				0x00
+#define VPSSBL_PCR				0x04
+#define VPSSBL_BCR				0x08
+#define VPSSBL_INTSTAT				0x0C
+#define VPSSBL_INTSEL				0x10
+#define VPSSBL_EVTSEL				0x14
+#define VPSSBL_MEMCTRL				0x18
+#define VPSSBL_CCDCMUX				0x1C
+
+/* DM365 ISP5 system configuration */
+#define ISP5_PID				0x0
+#define ISP5_PCCR				0x4
+#define ISP5_BCR				0x8
+#define ISP5_INTSTAT				0xC
+#define ISP5_INTSEL1				0x10
+#define ISP5_INTSEL2				0x14
+#define ISP5_INTSEL3				0x18
+#define ISP5_EVTSEL				0x1c
+#define ISP5_CCDCMUX				0x20
+
+/* VPBE On-Screen Display Subsystem Registers (OSD) */
+#define OSD_MODE				0x00
+#define OSD_VIDWINMD				0x04
+#define OSD_OSDWIN0MD				0x08
+#define OSD_OSDWIN1MD				0x0C
+#define OSD_OSDATRMD				0x0C
+#define OSD_RECTCUR				0x10
+#define OSD_VIDWIN0OFST				0x18
+#define OSD_VIDWIN1OFST				0x1C
+#define OSD_OSDWIN0OFST				0x20
+#define OSD_OSDWIN1OFST				0x24
+#define OSD_VIDWINADH				0x28
+#define OSD_VIDWIN0ADL				0x2C
+#define OSD_VIDWIN0ADR				0x2C
+#define OSD_VIDWIN1ADL				0x30
+#define OSD_VIDWIN1ADR				0x30
+#define OSD_OSDWINADH				0x34
+#define OSD_OSDWIN0ADL				0x38
+#define OSD_OSDWIN0ADR				0x38
+#define OSD_OSDWIN1ADL				0x3C
+#define OSD_OSDWIN1ADR				0x3C
+#define OSD_BASEPX				0x40
+#define OSD_BASEPY				0x44
+#define OSD_VIDWIN0XP				0x48
+#define OSD_VIDWIN0YP				0x4C
+#define OSD_VIDWIN0XL				0x50
+#define OSD_VIDWIN0YL				0x54
+#define OSD_VIDWIN1XP				0x58
+#define OSD_VIDWIN1YP				0x5C
+#define OSD_VIDWIN1XL				0x60
+#define OSD_VIDWIN1YL				0x64
+#define OSD_OSDWIN0XP				0x68
+#define OSD_OSDWIN0YP				0x6C
+#define OSD_OSDWIN0XL				0x70
+#define OSD_OSDWIN0YL				0x74
+#define OSD_OSDWIN1XP				0x78
+#define OSD_OSDWIN1YP				0x7C
+#define OSD_OSDWIN1XL				0x80
+#define OSD_OSDWIN1YL				0x84
+#define OSD_CURXP				0x88
+#define OSD_CURYP				0x8C
+#define OSD_CURXL				0x90
+#define OSD_CURYL				0x94
+#define OSD_W0BMP01				0xA0
+#define OSD_W0BMP23				0xA4
+#define OSD_W0BMP45				0xA8
+#define OSD_W0BMP67				0xAC
+#define OSD_W0BMP89				0xB0
+#define OSD_W0BMPAB				0xB4
+#define OSD_W0BMPCD				0xB8
+#define OSD_W0BMPEF				0xBC
+#define OSD_W1BMP01				0xC0
+#define OSD_W1BMP23				0xC4
+#define OSD_W1BMP45				0xC8
+#define OSD_W1BMP67				0xCC
+#define OSD_W1BMP89				0xD0
+#define OSD_W1BMPAB				0xD4
+#define OSD_W1BMPCD				0xD8
+#define OSD_W1BMPEF				0xDC
+#define OSD_VBNDRY				0xE0
+#define OSD_EXTMODE				0xE4
+#define OSD_MISCCTL				0xE8
+#define OSD_CLUTRAMYCB				0xEC
+#define OSD_CLUTRAMCR				0xF0
+#define OSD_TRANSPVAL				0xF4
+#define OSD_TRANSPVALL				0xF4
+#define OSD_TRANSPVALU				0xF8
+#define OSD_TRANSPBMPIDX			0xFC
+#define OSD_PPVWIN0ADR				0xFC
+
+/* bit definitions */
+#define VPBE_PCR_VENC_DIV			(1 << 1)
+#define VPBE_PCR_CLK_OFF			(1 << 0)
+
+#define VPSSBL_INTSTAT_HSSIINT			(1 << 14)
+#define VPSSBL_INTSTAT_CFALDINT			(1 << 13)
+#define VPSSBL_INTSTAT_IPIPE_INT5		(1 << 12)
+#define VPSSBL_INTSTAT_IPIPE_INT4		(1 << 11)
+#define VPSSBL_INTSTAT_IPIPE_INT3		(1 << 10)
+#define VPSSBL_INTSTAT_IPIPE_INT2		(1 << 9)
+#define VPSSBL_INTSTAT_IPIPE_INT1		(1 << 8)
+#define VPSSBL_INTSTAT_IPIPE_INT0		(1 << 7)
+#define VPSSBL_INTSTAT_IPIPEIFINT		(1 << 6)
+#define VPSSBL_INTSTAT_OSDINT			(1 << 5)
+#define VPSSBL_INTSTAT_VENCINT			(1 << 4)
+#define VPSSBL_INTSTAT_H3AINT			(1 << 3)
+#define VPSSBL_INTSTAT_CCDC_VDINT2		(1 << 2)
+#define VPSSBL_INTSTAT_CCDC_VDINT1		(1 << 1)
+#define VPSSBL_INTSTAT_CCDC_VDINT0		(1 << 0)
+
+/* DM365 ISP5 bit definitions */
+#define ISP5_INTSTAT_VENCINT			(1 << 21)
+#define ISP5_INTSTAT_OSDINT			(1 << 20)
+
+/* VMOD TVTYP options for HDMD=0 */
+#define SDTV_NTSC				0
+#define SDTV_PAL				1
+/* VMOD TVTYP options for HDMD=1 */
+#define HDTV_525P				0
+#define HDTV_625P				1
+#define HDTV_1080I				2
+#define HDTV_720P				3
+
+#define OSD_MODE_CS				(1 << 15)
+#define OSD_MODE_OVRSZ				(1 << 14)
+#define OSD_MODE_OHRSZ				(1 << 13)
+#define OSD_MODE_EF				(1 << 12)
+#define OSD_MODE_VVRSZ				(1 << 11)
+#define OSD_MODE_VHRSZ				(1 << 10)
+#define OSD_MODE_FSINV				(1 << 9)
+#define OSD_MODE_BCLUT				(1 << 8)
+#define OSD_MODE_CABG_SHIFT			0
+#define OSD_MODE_CABG				(0xff << 0)
+
+#define OSD_VIDWINMD_VFINV			(1 << 15)
+#define OSD_VIDWINMD_V1EFC			(1 << 14)
+#define OSD_VIDWINMD_VHZ1_SHIFT			12
+#define OSD_VIDWINMD_VHZ1			(3 << 12)
+#define OSD_VIDWINMD_VVZ1_SHIFT			10
+#define OSD_VIDWINMD_VVZ1			(3 << 10)
+#define OSD_VIDWINMD_VFF1			(1 << 9)
+#define OSD_VIDWINMD_ACT1			(1 << 8)
+#define OSD_VIDWINMD_V0EFC			(1 << 6)
+#define OSD_VIDWINMD_VHZ0_SHIFT			4
+#define OSD_VIDWINMD_VHZ0			(3 << 4)
+#define OSD_VIDWINMD_VVZ0_SHIFT			2
+#define OSD_VIDWINMD_VVZ0			(3 << 2)
+#define OSD_VIDWINMD_VFF0			(1 << 1)
+#define OSD_VIDWINMD_ACT0			(1 << 0)
+
+#define OSD_OSDWIN0MD_ATN0E			(1 << 14)
+#define OSD_OSDWIN0MD_RGB0E			(1 << 13)
+#define OSD_OSDWIN0MD_BMP0MD_SHIFT		13
+#define OSD_OSDWIN0MD_BMP0MD			(3 << 13)
+#define OSD_OSDWIN0MD_CLUTS0			(1 << 12)
+#define OSD_OSDWIN0MD_OHZ0_SHIFT		10
+#define OSD_OSDWIN0MD_OHZ0			(3 << 10)
+#define OSD_OSDWIN0MD_OVZ0_SHIFT		8
+#define OSD_OSDWIN0MD_OVZ0			(3 << 8)
+#define OSD_OSDWIN0MD_BMW0_SHIFT		6
+#define OSD_OSDWIN0MD_BMW0			(3 << 6)
+#define OSD_OSDWIN0MD_BLND0_SHIFT		3
+#define OSD_OSDWIN0MD_BLND0			(7 << 3)
+#define OSD_OSDWIN0MD_TE0			(1 << 2)
+#define OSD_OSDWIN0MD_OFF0			(1 << 1)
+#define OSD_OSDWIN0MD_OACT0			(1 << 0)
+
+#define OSD_OSDWIN1MD_OASW			(1 << 15)
+#define OSD_OSDWIN1MD_ATN1E			(1 << 14)
+#define OSD_OSDWIN1MD_RGB1E			(1 << 13)
+#define OSD_OSDWIN1MD_BMP1MD_SHIFT		13
+#define OSD_OSDWIN1MD_BMP1MD			(3 << 13)
+#define OSD_OSDWIN1MD_CLUTS1			(1 << 12)
+#define OSD_OSDWIN1MD_OHZ1_SHIFT		10
+#define OSD_OSDWIN1MD_OHZ1			(3 << 10)
+#define OSD_OSDWIN1MD_OVZ1_SHIFT		8
+#define OSD_OSDWIN1MD_OVZ1			(3 << 8)
+#define OSD_OSDWIN1MD_BMW1_SHIFT		6
+#define OSD_OSDWIN1MD_BMW1			(3 << 6)
+#define OSD_OSDWIN1MD_BLND1_SHIFT		3
+#define OSD_OSDWIN1MD_BLND1			(7 << 3)
+#define OSD_OSDWIN1MD_TE1			(1 << 2)
+#define OSD_OSDWIN1MD_OFF1			(1 << 1)
+#define OSD_OSDWIN1MD_OACT1			(1 << 0)
+
+#define OSD_OSDATRMD_OASW			(1 << 15)
+#define OSD_OSDATRMD_OHZA_SHIFT			10
+#define OSD_OSDATRMD_OHZA			(3 << 10)
+#define OSD_OSDATRMD_OVZA_SHIFT			8
+#define OSD_OSDATRMD_OVZA			(3 << 8)
+#define OSD_OSDATRMD_BLNKINT_SHIFT		6
+#define OSD_OSDATRMD_BLNKINT			(3 << 6)
+#define OSD_OSDATRMD_OFFA			(1 << 1)
+#define OSD_OSDATRMD_BLNK			(1 << 0)
+
+#define OSD_RECTCUR_RCAD_SHIFT			8
+#define OSD_RECTCUR_RCAD			(0xff << 8)
+#define OSD_RECTCUR_CLUTSR			(1 << 7)
+#define OSD_RECTCUR_RCHW_SHIFT			4
+#define OSD_RECTCUR_RCHW			(7 << 4)
+#define OSD_RECTCUR_RCVW_SHIFT			1
+#define OSD_RECTCUR_RCVW			(7 << 1)
+#define OSD_RECTCUR_RCACT			(1 << 0)
+
+#define OSD_VIDWIN0OFST_V0LO			(0x1ff << 0)
+
+#define OSD_VIDWIN1OFST_V1LO			(0x1ff << 0)
+
+#define OSD_OSDWIN0OFST_O0LO			(0x1ff << 0)
+
+#define OSD_OSDWIN1OFST_O1LO			(0x1ff << 0)
+
+#define OSD_WINOFST_AH_SHIFT			9
+
+#define OSD_VIDWIN0OFST_V0AH			(0xf << 9)
+#define OSD_VIDWIN1OFST_V1AH			(0xf << 9)
+#define OSD_OSDWIN0OFST_O0AH			(0xf << 9)
+#define OSD_OSDWIN1OFST_O1AH			(0xf << 9)
+
+#define OSD_VIDWINADH_V1AH_SHIFT		8
+#define OSD_VIDWINADH_V1AH			(0x7f << 8)
+#define OSD_VIDWINADH_V0AH_SHIFT		0
+#define OSD_VIDWINADH_V0AH			(0x7f << 0)
+
+#define OSD_VIDWIN0ADL_V0AL			(0xffff << 0)
+
+#define OSD_VIDWIN1ADL_V1AL			(0xffff << 0)
+
+#define OSD_OSDWINADH_O1AH_SHIFT		8
+#define OSD_OSDWINADH_O1AH			(0x7f << 8)
+#define OSD_OSDWINADH_O0AH_SHIFT		0
+#define OSD_OSDWINADH_O0AH			(0x7f << 0)
+
+#define OSD_OSDWIN0ADL_O0AL			(0xffff << 0)
+
+#define OSD_OSDWIN1ADL_O1AL			(0xffff << 0)
+
+#define OSD_BASEPX_BPX				(0x3ff << 0)
+
+#define OSD_BASEPY_BPY				(0x1ff << 0)
+
+#define OSD_VIDWIN0XP_V0X			(0x7ff << 0)
+
+#define OSD_VIDWIN0YP_V0Y			(0x7ff << 0)
+
+#define OSD_VIDWIN0XL_V0W			(0x7ff << 0)
+
+#define OSD_VIDWIN0YL_V0H			(0x7ff << 0)
+
+#define OSD_VIDWIN1XP_V1X			(0x7ff << 0)
+
+#define OSD_VIDWIN1YP_V1Y			(0x7ff << 0)
+
+#define OSD_VIDWIN1XL_V1W			(0x7ff << 0)
+
+#define OSD_VIDWIN1YL_V1H			(0x7ff << 0)
+
+#define OSD_OSDWIN0XP_W0X			(0x7ff << 0)
+
+#define OSD_OSDWIN0YP_W0Y			(0x7ff << 0)
+
+#define OSD_OSDWIN0XL_W0W			(0x7ff << 0)
+
+#define OSD_OSDWIN0YL_W0H			(0x7ff << 0)
+
+#define OSD_OSDWIN1XP_W1X			(0x7ff << 0)
+
+#define OSD_OSDWIN1YP_W1Y			(0x7ff << 0)
+
+#define OSD_OSDWIN1XL_W1W			(0x7ff << 0)
+
+#define OSD_OSDWIN1YL_W1H			(0x7ff << 0)
+
+#define OSD_CURXP_RCSX				(0x7ff << 0)
+
+#define OSD_CURYP_RCSY				(0x7ff << 0)
+
+#define OSD_CURXL_RCSW				(0x7ff << 0)
+
+#define OSD_CURYL_RCSH				(0x7ff << 0)
+
+#define OSD_EXTMODE_EXPMDSEL			(1 << 15)
+#define OSD_EXTMODE_SCRNHEXP_SHIFT		13
+#define OSD_EXTMODE_SCRNHEXP			(3 << 13)
+#define OSD_EXTMODE_SCRNVEXP			(1 << 12)
+#define OSD_EXTMODE_OSD1BLDCHR			(1 << 11)
+#define OSD_EXTMODE_OSD0BLDCHR			(1 << 10)
+#define OSD_EXTMODE_ATNOSD1EN			(1 << 9)
+#define OSD_EXTMODE_ATNOSD0EN			(1 << 8)
+#define OSD_EXTMODE_OSDHRSZ15			(1 << 7)
+#define OSD_EXTMODE_VIDHRSZ15			(1 << 6)
+#define OSD_EXTMODE_ZMFILV1HEN			(1 << 5)
+#define OSD_EXTMODE_ZMFILV1VEN			(1 << 4)
+#define OSD_EXTMODE_ZMFILV0HEN			(1 << 3)
+#define OSD_EXTMODE_ZMFILV0VEN			(1 << 2)
+#define OSD_EXTMODE_EXPFILHEN			(1 << 1)
+#define OSD_EXTMODE_EXPFILVEN			(1 << 0)
+
+#define OSD_MISCCTL_BLDSEL			(1 << 15)
+#define OSD_MISCCTL_S420D			(1 << 14)
+#define OSD_MISCCTL_BMAPT			(1 << 13)
+#define OSD_MISCCTL_DM365M			(1 << 12)
+#define OSD_MISCCTL_RGBEN			(1 << 7)
+#define OSD_MISCCTL_RGBWIN			(1 << 6)
+#define OSD_MISCCTL_DMANG			(1 << 6)
+#define OSD_MISCCTL_TMON			(1 << 5)
+#define OSD_MISCCTL_RSEL			(1 << 4)
+#define OSD_MISCCTL_CPBSY			(1 << 3)
+#define OSD_MISCCTL_PPSW			(1 << 2)
+#define OSD_MISCCTL_PPRV			(1 << 1)
+
+#define OSD_CLUTRAMYCB_Y_SHIFT			8
+#define OSD_CLUTRAMYCB_Y			(0xff << 8)
+#define OSD_CLUTRAMYCB_CB_SHIFT			0
+#define OSD_CLUTRAMYCB_CB			(0xff << 0)
+
+#define OSD_CLUTRAMCR_CR_SHIFT			8
+#define OSD_CLUTRAMCR_CR			(0xff << 8)
+#define OSD_CLUTRAMCR_CADDR_SHIFT		0
+#define OSD_CLUTRAMCR_CADDR			(0xff << 0)
+
+#define OSD_TRANSPVAL_RGBTRANS			(0xffff << 0)
+
+#define OSD_TRANSPVALL_RGBL			(0xffff << 0)
+
+#define OSD_TRANSPVALU_Y_SHIFT			8
+#define OSD_TRANSPVALU_Y			(0xff << 8)
+#define OSD_TRANSPVALU_RGBU_SHIFT		0
+#define OSD_TRANSPVALU_RGBU			(0xff << 0)
+
+#define OSD_TRANSPBMPIDX_BMP1_SHIFT		8
+#define OSD_TRANSPBMPIDX_BMP1			(0xff << 8)
+#define OSD_TRANSPBMPIDX_BMP0_SHIFT		0
+#define OSD_TRANSPBMPIDX_BMP0			0xff
+
+#endif				/* _DAVINCI_VPBE_H_ */
diff --git a/drivers/media/video/davinci/vpbe_venc.c b/drivers/media/video/davinci/vpbe_venc.c
new file mode 100644
index 00000000000..03a3e5c65ee
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe_venc.c
@@ -0,0 +1,566 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/videodev2.h>
+#include <linux/slab.h>
+
+#include <mach/hardware.h>
+#include <mach/mux.h>
+#include <mach/io.h>
+#include <mach/i2c.h>
+
+#include <linux/io.h>
+
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe_venc.h>
+#include <media/davinci/vpss.h>
+#include <media/v4l2-device.h>
+
+#include "vpbe_venc_regs.h"
+
+#define MODULE_NAME	VPBE_VENC_SUBDEV_NAME
+
+static int debug = 2;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level 0-2");
+
+struct venc_state {
+	struct v4l2_subdev sd;
+	struct venc_callback *callback;
+	struct venc_platform_data *pdata;
+	struct device *pdev;
+	u32 output;
+	v4l2_std_id std;
+	spinlock_t lock;
+	void __iomem *venc_base;
+	void __iomem *vdaccfg_reg;
+};
+
+static inline struct venc_state *to_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct venc_state, sd);
+}
+
+static inline u32 venc_read(struct v4l2_subdev *sd, u32 offset)
+{
+	struct venc_state *venc = to_state(sd);
+
+	return readl(venc->venc_base + offset);
+}
+
+static inline u32 venc_write(struct v4l2_subdev *sd, u32 offset, u32 val)
+{
+	struct venc_state *venc = to_state(sd);
+
+	writel(val, (venc->venc_base + offset));
+
+	return val;
+}
+
+static inline u32 venc_modify(struct v4l2_subdev *sd, u32 offset,
+				 u32 val, u32 mask)
+{
+	u32 new_val = (venc_read(sd, offset) & ~mask) | (val & mask);
+
+	venc_write(sd, offset, new_val);
+
+	return new_val;
+}
+
+static inline u32 vdaccfg_write(struct v4l2_subdev *sd, u32 val)
+{
+	struct venc_state *venc = to_state(sd);
+
+	writel(val, venc->vdaccfg_reg);
+
+	val = readl(venc->vdaccfg_reg);
+
+	return val;
+}
+
+/* This function sets the dac of the VPBE for various outputs
+ */
+static int venc_set_dac(struct v4l2_subdev *sd, u32 out_index)
+{
+	switch (out_index) {
+	case 0:
+		v4l2_dbg(debug, 1, sd, "Setting output to Composite\n");
+		venc_write(sd, VENC_DACSEL, 0);
+		break;
+	case 1:
+		v4l2_dbg(debug, 1, sd, "Setting output to S-Video\n");
+		venc_write(sd, VENC_DACSEL, 0x210);
+		break;
+	case  2:
+		venc_write(sd, VENC_DACSEL, 0x543);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void venc_enabledigitaloutput(struct v4l2_subdev *sd, int benable)
+{
+	v4l2_dbg(debug, 2, sd, "venc_enabledigitaloutput\n");
+
+	if (benable) {
+		venc_write(sd, VENC_VMOD, 0);
+		venc_write(sd, VENC_CVBS, 0);
+		venc_write(sd, VENC_LCDOUT, 0);
+		venc_write(sd, VENC_HSPLS, 0);
+		venc_write(sd, VENC_HSTART, 0);
+		venc_write(sd, VENC_HVALID, 0);
+		venc_write(sd, VENC_HINT, 0);
+		venc_write(sd, VENC_VSPLS, 0);
+		venc_write(sd, VENC_VSTART, 0);
+		venc_write(sd, VENC_VVALID, 0);
+		venc_write(sd, VENC_VINT, 0);
+		venc_write(sd, VENC_YCCCTL, 0);
+		venc_write(sd, VENC_DACSEL, 0);
+
+	} else {
+		venc_write(sd, VENC_VMOD, 0);
+		/* disable VCLK output pin enable */
+		venc_write(sd, VENC_VIDCTL, 0x141);
+
+		/* Disable output sync pins */
+		venc_write(sd, VENC_SYNCCTL, 0);
+
+		/* Disable DCLOCK */
+		venc_write(sd, VENC_DCLKCTL, 0);
+		venc_write(sd, VENC_DRGBX1, 0x0000057C);
+
+		/* Disable LCD output control (accepting default polarity) */
+		venc_write(sd, VENC_LCDOUT, 0);
+		venc_write(sd, VENC_CMPNT, 0x100);
+		venc_write(sd, VENC_HSPLS, 0);
+		venc_write(sd, VENC_HINT, 0);
+		venc_write(sd, VENC_HSTART, 0);
+		venc_write(sd, VENC_HVALID, 0);
+
+		venc_write(sd, VENC_VSPLS, 0);
+		venc_write(sd, VENC_VINT, 0);
+		venc_write(sd, VENC_VSTART, 0);
+		venc_write(sd, VENC_VVALID, 0);
+
+		venc_write(sd, VENC_HSDLY, 0);
+		venc_write(sd, VENC_VSDLY, 0);
+
+		venc_write(sd, VENC_YCCCTL, 0);
+		venc_write(sd, VENC_VSTARTA, 0);
+
+		/* Set OSD clock and OSD Sync Adavance registers */
+		venc_write(sd, VENC_OSDCLK0, 1);
+		venc_write(sd, VENC_OSDCLK1, 2);
+	}
+}
+
+/*
+ * setting NTSC mode
+ */
+static int venc_set_ntsc(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	struct venc_platform_data *pdata = venc->pdata;
+
+	v4l2_dbg(debug, 2, sd, "venc_set_ntsc\n");
+
+	/* Setup clock at VPSS & VENC for SD */
+	vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
+	if (pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_525_60) < 0)
+		return -EINVAL;
+
+	venc_enabledigitaloutput(sd, 0);
+
+	/* to set VENC CLK DIV to 1 - final clock is 54 MHz */
+	venc_modify(sd, VENC_VIDCTL, 0, 1 << 1);
+	/* Set REC656 Mode */
+	venc_write(sd, VENC_YCCCTL, 0x1);
+	venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAFRQ);
+	venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAUPS);
+
+	venc_write(sd, VENC_VMOD, 0);
+	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
+			VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_VMD), VENC_VMOD_VMD);
+	venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_TVTYP_SHIFT),
+			VENC_VMOD_TVTYP);
+	venc_write(sd, VENC_DACTST, 0x0);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+
+	return 0;
+}
+
+/*
+ * setting PAL mode
+ */
+static int venc_set_pal(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+
+	v4l2_dbg(debug, 2, sd, "venc_set_pal\n");
+
+	/* Setup clock at VPSS & VENC for SD */
+	vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
+	if (venc->pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_625_50) < 0)
+		return -EINVAL;
+
+	venc_enabledigitaloutput(sd, 0);
+
+	/* to set VENC CLK DIV to 1 - final clock is 54 MHz */
+	venc_modify(sd, VENC_VIDCTL, 0, 1 << 1);
+	/* Set REC656 Mode */
+	venc_write(sd, VENC_YCCCTL, 0x1);
+
+	venc_modify(sd, VENC_SYNCCTL, 1 << VENC_SYNCCTL_OVD_SHIFT,
+			VENC_SYNCCTL_OVD);
+	venc_write(sd, VENC_VMOD, 0);
+	venc_modify(sd, VENC_VMOD,
+			(1 << VENC_VMOD_VIE_SHIFT),
+			VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD,
+			(0 << VENC_VMOD_VMD), VENC_VMOD_VMD);
+	venc_modify(sd, VENC_VMOD,
+			(1 << VENC_VMOD_TVTYP_SHIFT),
+			VENC_VMOD_TVTYP);
+	venc_write(sd, VENC_DACTST, 0x0);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+
+	return 0;
+}
+
+/*
+ * venc_set_480p59_94
+ *
+ * This function configures the video encoder to EDTV(525p) component setting.
+ */
+static int venc_set_480p59_94(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	struct venc_platform_data *pdata = venc->pdata;
+
+	v4l2_dbg(debug, 2, sd, "venc_set_480p59_94\n");
+
+	/* Setup clock at VPSS & VENC for SD */
+	if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_480P59_94) < 0)
+		return -EINVAL;
+
+	venc_enabledigitaloutput(sd, 0);
+
+	venc_write(sd, VENC_OSDCLK0, 0);
+	venc_write(sd, VENC_OSDCLK1, 1);
+	venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ,
+		    VENC_VDPRO_DAFRQ);
+	venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS,
+		    VENC_VDPRO_DAUPS);
+	venc_write(sd, VENC_VMOD, 0);
+	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
+		    VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
+	venc_modify(sd, VENC_VMOD, (HDTV_525P << VENC_VMOD_TVTYP_SHIFT),
+		    VENC_VMOD_TVTYP);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 <<
+		    VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD);
+
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+
+	return 0;
+}
+
+/*
+ * venc_set_625p
+ *
+ * This function configures the video encoder to HDTV(625p) component setting
+ */
+static int venc_set_576p50(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	struct venc_platform_data *pdata = venc->pdata;
+
+	v4l2_dbg(debug, 2, sd, "venc_set_576p50\n");
+
+	/* Setup clock at VPSS & VENC for SD */
+	if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_576P50) < 0)
+		return -EINVAL;
+
+	venc_enabledigitaloutput(sd, 0);
+
+	venc_write(sd, VENC_OSDCLK0, 0);
+	venc_write(sd, VENC_OSDCLK1, 1);
+
+	venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ,
+		    VENC_VDPRO_DAFRQ);
+	venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS,
+		    VENC_VDPRO_DAUPS);
+
+	venc_write(sd, VENC_VMOD, 0);
+	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
+		    VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
+	venc_modify(sd, VENC_VMOD, (HDTV_625P << VENC_VMOD_TVTYP_SHIFT),
+		    VENC_VMOD_TVTYP);
+
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 <<
+		    VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+
+	return 0;
+}
+
+static int venc_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm)
+{
+	v4l2_dbg(debug, 1, sd, "venc_s_std_output\n");
+
+	if (norm & V4L2_STD_525_60)
+		return venc_set_ntsc(sd);
+	else if (norm & V4L2_STD_625_50)
+		return venc_set_pal(sd);
+
+	return -EINVAL;
+}
+
+static int venc_s_dv_preset(struct v4l2_subdev *sd,
+			    struct v4l2_dv_preset *dv_preset)
+{
+	v4l2_dbg(debug, 1, sd, "venc_s_dv_preset\n");
+
+	if (dv_preset->preset == V4L2_DV_576P50)
+		return venc_set_576p50(sd);
+	else if (dv_preset->preset == V4L2_DV_480P59_94)
+		return venc_set_480p59_94(sd);
+
+	return -EINVAL;
+}
+
+static int venc_s_routing(struct v4l2_subdev *sd, u32 input, u32 output,
+			  u32 config)
+{
+	struct venc_state *venc = to_state(sd);
+	int ret;
+
+	v4l2_dbg(debug, 1, sd, "venc_s_routing\n");
+
+	ret = venc_set_dac(sd, output);
+	if (!ret)
+		venc->output = output;
+
+	return ret;
+}
+
+static long venc_ioctl(struct v4l2_subdev *sd,
+			unsigned int cmd,
+			void *arg)
+{
+	u32 val;
+
+	switch (cmd) {
+	case VENC_GET_FLD:
+		val = venc_read(sd, VENC_VSTAT);
+		*((int *)arg) = ((val & VENC_VSTAT_FIDST) ==
+		VENC_VSTAT_FIDST);
+		break;
+	default:
+		v4l2_err(sd, "Wrong IOCTL cmd\n");
+		break;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops venc_core_ops = {
+	.ioctl      = venc_ioctl,
+};
+
+static const struct v4l2_subdev_video_ops venc_video_ops = {
+	.s_routing = venc_s_routing,
+	.s_std_output = venc_s_std_output,
+	.s_dv_preset = venc_s_dv_preset,
+};
+
+static const struct v4l2_subdev_ops venc_ops = {
+	.core = &venc_core_ops,
+	.video = &venc_video_ops,
+};
+
+static int venc_initialize(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	int ret;
+
+	/* Set default to output to composite and std to NTSC */
+	venc->output = 0;
+	venc->std = V4L2_STD_525_60;
+
+	ret = venc_s_routing(sd, 0, venc->output, 0);
+	if (ret < 0) {
+		v4l2_err(sd, "Error setting output during init\n");
+		return -EINVAL;
+	}
+
+	ret = venc_s_std_output(sd, venc->std);
+	if (ret < 0) {
+		v4l2_err(sd, "Error setting std during init\n");
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int venc_device_get(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct venc_state **venc = data;
+
+	if (strcmp(MODULE_NAME, pdev->name) == 0)
+		*venc = platform_get_drvdata(pdev);
+
+	return 0;
+}
+
+struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev,
+		const char *venc_name)
+{
+	struct venc_state *venc;
+	int err;
+
+	err = bus_for_each_dev(&platform_bus_type, NULL, &venc,
+			venc_device_get);
+	if (venc == NULL)
+		return NULL;
+
+	v4l2_subdev_init(&venc->sd, &venc_ops);
+
+	strcpy(venc->sd.name, venc_name);
+	if (v4l2_device_register_subdev(v4l2_dev, &venc->sd) < 0) {
+		v4l2_err(v4l2_dev,
+			"vpbe unable to register venc sub device\n");
+		return NULL;
+	}
+	if (venc_initialize(&venc->sd)) {
+		v4l2_err(v4l2_dev,
+			"vpbe venc initialization failed\n");
+		return NULL;
+	}
+
+	return &venc->sd;
+}
+EXPORT_SYMBOL(venc_sub_dev_init);
+
+static int venc_probe(struct platform_device *pdev)
+{
+	struct venc_state *venc;
+	struct resource *res;
+	int ret;
+
+	venc = kzalloc(sizeof(struct venc_state), GFP_KERNEL);
+	if (venc == NULL)
+		return -ENOMEM;
+
+	venc->pdev = &pdev->dev;
+	venc->pdata = pdev->dev.platform_data;
+	if (NULL == venc->pdata) {
+		dev_err(venc->pdev, "Unable to get platform data for"
+			" VENC sub device");
+		ret = -ENOENT;
+		goto free_mem;
+	}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(venc->pdev,
+			"Unable to get VENC register address map\n");
+		ret = -ENODEV;
+		goto free_mem;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res), "venc")) {
+		dev_err(venc->pdev, "Unable to reserve VENC MMIO region\n");
+		ret = -ENODEV;
+		goto free_mem;
+	}
+
+	venc->venc_base = ioremap_nocache(res->start, resource_size(res));
+	if (!venc->venc_base) {
+		dev_err(venc->pdev, "Unable to map VENC IO space\n");
+		ret = -ENODEV;
+		goto release_venc_mem_region;
+	}
+
+	spin_lock_init(&venc->lock);
+	platform_set_drvdata(pdev, venc);
+	dev_notice(venc->pdev, "VENC sub device probe success\n");
+	return 0;
+
+release_venc_mem_region:
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+free_mem:
+	kfree(venc);
+	return ret;
+}
+
+static int venc_remove(struct platform_device *pdev)
+{
+	struct venc_state *venc = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iounmap((void *)venc->venc_base);
+	release_mem_region(res->start, resource_size(res));
+	kfree(venc);
+
+	return 0;
+}
+
+static struct platform_driver venc_driver = {
+	.probe		= venc_probe,
+	.remove		= venc_remove,
+	.driver		= {
+		.name	= MODULE_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int venc_init(void)
+{
+	if (platform_driver_register(&venc_driver)) {
+		printk(KERN_ERR "Unable to register venc driver\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static void venc_exit(void)
+{
+	platform_driver_unregister(&venc_driver);
+	return;
+}
+
+module_init(venc_init);
+module_exit(venc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VPBE VENC Driver");
+MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/video/davinci/vpbe_venc_regs.h b/drivers/media/video/davinci/vpbe_venc_regs.h
new file mode 100644
index 00000000000..947cb151077
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe_venc_regs.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2006-2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2..
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_VENC_REGS_H
+#define _VPBE_VENC_REGS_H
+
+/* VPBE Video Encoder / Digital LCD Subsystem Registers (VENC) */
+#define VENC_VMOD				0x00
+#define VENC_VIDCTL				0x04
+#define VENC_VDPRO				0x08
+#define VENC_SYNCCTL				0x0C
+#define VENC_HSPLS				0x10
+#define VENC_VSPLS				0x14
+#define VENC_HINT				0x18
+#define VENC_HSTART				0x1C
+#define VENC_HVALID				0x20
+#define VENC_VINT				0x24
+#define VENC_VSTART				0x28
+#define VENC_VVALID				0x2C
+#define VENC_HSDLY				0x30
+#define VENC_VSDLY				0x34
+#define VENC_YCCCTL				0x38
+#define VENC_RGBCTL				0x3C
+#define VENC_RGBCLP				0x40
+#define VENC_LINECTL				0x44
+#define VENC_CULLLINE				0x48
+#define VENC_LCDOUT				0x4C
+#define VENC_BRTS				0x50
+#define VENC_BRTW				0x54
+#define VENC_ACCTL				0x58
+#define VENC_PWMP				0x5C
+#define VENC_PWMW				0x60
+#define VENC_DCLKCTL				0x64
+#define VENC_DCLKPTN0				0x68
+#define VENC_DCLKPTN1				0x6C
+#define VENC_DCLKPTN2				0x70
+#define VENC_DCLKPTN3				0x74
+#define VENC_DCLKPTN0A				0x78
+#define VENC_DCLKPTN1A				0x7C
+#define VENC_DCLKPTN2A				0x80
+#define VENC_DCLKPTN3A				0x84
+#define VENC_DCLKHS				0x88
+#define VENC_DCLKHSA				0x8C
+#define VENC_DCLKHR				0x90
+#define VENC_DCLKVS				0x94
+#define VENC_DCLKVR				0x98
+#define VENC_CAPCTL				0x9C
+#define VENC_CAPDO				0xA0
+#define VENC_CAPDE				0xA4
+#define VENC_ATR0				0xA8
+#define VENC_ATR1				0xAC
+#define VENC_ATR2				0xB0
+#define VENC_VSTAT				0xB8
+#define VENC_RAMADR				0xBC
+#define VENC_RAMPORT				0xC0
+#define VENC_DACTST				0xC4
+#define VENC_YCOLVL				0xC8
+#define VENC_SCPROG				0xCC
+#define VENC_CVBS				0xDC
+#define VENC_CMPNT				0xE0
+#define VENC_ETMG0				0xE4
+#define VENC_ETMG1				0xE8
+#define VENC_ETMG2				0xEC
+#define VENC_ETMG3				0xF0
+#define VENC_DACSEL				0xF4
+#define VENC_ARGBX0				0x100
+#define VENC_ARGBX1				0x104
+#define VENC_ARGBX2				0x108
+#define VENC_ARGBX3				0x10C
+#define VENC_ARGBX4				0x110
+#define VENC_DRGBX0				0x114
+#define VENC_DRGBX1				0x118
+#define VENC_DRGBX2				0x11C
+#define VENC_DRGBX3				0x120
+#define VENC_DRGBX4				0x124
+#define VENC_VSTARTA				0x128
+#define VENC_OSDCLK0				0x12C
+#define VENC_OSDCLK1				0x130
+#define VENC_HVLDCL0				0x134
+#define VENC_HVLDCL1				0x138
+#define VENC_OSDHADV				0x13C
+#define VENC_CLKCTL				0x140
+#define VENC_GAMCTL				0x144
+#define VENC_XHINTVL				0x174
+
+/* bit definitions */
+#define VPBE_PCR_VENC_DIV			(1 << 1)
+#define VPBE_PCR_CLK_OFF			(1 << 0)
+
+#define VENC_VMOD_VDMD_SHIFT			12
+#define VENC_VMOD_VDMD_YCBCR16			0
+#define VENC_VMOD_VDMD_YCBCR8			1
+#define VENC_VMOD_VDMD_RGB666			2
+#define VENC_VMOD_VDMD_RGB8			3
+#define VENC_VMOD_VDMD_EPSON			4
+#define VENC_VMOD_VDMD_CASIO			5
+#define VENC_VMOD_VDMD_UDISPQVGA		6
+#define VENC_VMOD_VDMD_STNLCD			7
+#define VENC_VMOD_VIE_SHIFT			1
+#define VENC_VMOD_VDMD				(7 << 12)
+#define VENC_VMOD_ITLCL				(1 << 11)
+#define VENC_VMOD_ITLC				(1 << 10)
+#define VENC_VMOD_NSIT				(1 << 9)
+#define VENC_VMOD_HDMD				(1 << 8)
+#define VENC_VMOD_TVTYP_SHIFT			6
+#define VENC_VMOD_TVTYP				(3 << 6)
+#define VENC_VMOD_SLAVE				(1 << 5)
+#define VENC_VMOD_VMD				(1 << 4)
+#define VENC_VMOD_BLNK				(1 << 3)
+#define VENC_VMOD_VIE				(1 << 1)
+#define VENC_VMOD_VENC				(1 << 0)
+
+/* VMOD TVTYP options for HDMD=0 */
+#define SDTV_NTSC				0
+#define SDTV_PAL				1
+/* VMOD TVTYP options for HDMD=1 */
+#define HDTV_525P				0
+#define HDTV_625P				1
+#define HDTV_1080I				2
+#define HDTV_720P				3
+
+#define VENC_VIDCTL_VCLKP			(1 << 14)
+#define VENC_VIDCTL_VCLKE_SHIFT			13
+#define VENC_VIDCTL_VCLKE			(1 << 13)
+#define VENC_VIDCTL_VCLKZ_SHIFT			12
+#define VENC_VIDCTL_VCLKZ			(1 << 12)
+#define VENC_VIDCTL_SYDIR_SHIFT			8
+#define VENC_VIDCTL_SYDIR			(1 << 8)
+#define VENC_VIDCTL_DOMD_SHIFT			4
+#define VENC_VIDCTL_DOMD			(3 << 4)
+#define VENC_VIDCTL_YCDIR_SHIFT			0
+#define VENC_VIDCTL_YCDIR			(1 << 0)
+
+#define VENC_VDPRO_ATYCC_SHIFT			5
+#define VENC_VDPRO_ATYCC			(1 << 5)
+#define VENC_VDPRO_ATCOM_SHIFT			4
+#define VENC_VDPRO_ATCOM			(1 << 4)
+#define VENC_VDPRO_DAFRQ			(1 << 3)
+#define VENC_VDPRO_DAUPS			(1 << 2)
+#define VENC_VDPRO_CUPS				(1 << 1)
+#define VENC_VDPRO_YUPS				(1 << 0)
+
+#define VENC_SYNCCTL_VPL_SHIFT			3
+#define VENC_SYNCCTL_VPL			(1 << 3)
+#define VENC_SYNCCTL_HPL_SHIFT			2
+#define VENC_SYNCCTL_HPL			(1 << 2)
+#define VENC_SYNCCTL_SYEV_SHIFT			1
+#define VENC_SYNCCTL_SYEV			(1 << 1)
+#define VENC_SYNCCTL_SYEH_SHIFT			0
+#define VENC_SYNCCTL_SYEH			(1 << 0)
+#define VENC_SYNCCTL_OVD_SHIFT			14
+#define VENC_SYNCCTL_OVD			(1 << 14)
+
+#define VENC_DCLKCTL_DCKEC_SHIFT		11
+#define VENC_DCLKCTL_DCKEC			(1 << 11)
+#define VENC_DCLKCTL_DCKPW_SHIFT		0
+#define VENC_DCLKCTL_DCKPW			(0x3f << 0)
+
+#define VENC_VSTAT_FIDST			(1 << 4)
+
+#define VENC_CMPNT_MRGB_SHIFT			14
+#define VENC_CMPNT_MRGB				(1 << 14)
+
+#endif				/* _VPBE_VENC_REGS_H */
diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c
index d93ad74a34c..49e4deb5004 100644
--- a/drivers/media/video/davinci/vpif_capture.c
+++ b/drivers/media/video/davinci/vpif_capture.c
@@ -33,7 +33,6 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/version.h>
 #include <linux/slab.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
@@ -44,6 +43,7 @@
 
 MODULE_DESCRIPTION("TI DaVinci VPIF Capture driver");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(VPIF_CAPTURE_VERSION);
 
 #define vpif_err(fmt, arg...)	v4l2_err(&vpif_obj.v4l2_dev, fmt, ## arg)
 #define vpif_dbg(level, debug, fmt, arg...)	\
@@ -1677,7 +1677,6 @@ static int vpif_querycap(struct file *file, void  *priv,
 {
 	struct vpif_capture_config *config = vpif_dev->platform_data;
 
-	cap->version = VPIF_CAPTURE_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 	strlcpy(cap->driver, "vpif capture", sizeof(cap->driver));
 	strlcpy(cap->bus_info, "DM646x Platform", sizeof(cap->bus_info));
@@ -2211,10 +2210,8 @@ static __init int vpif_probe(struct platform_device *pdev)
 		vfd->v4l2_dev = &vpif_obj.v4l2_dev;
 		vfd->release = video_device_release;
 		snprintf(vfd->name, sizeof(vfd->name),
-			 "DM646x_VPIFCapture_DRIVER_V%d.%d.%d",
-			 (VPIF_CAPTURE_VERSION_CODE >> 16) & 0xff,
-			 (VPIF_CAPTURE_VERSION_CODE >> 8) & 0xff,
-			 (VPIF_CAPTURE_VERSION_CODE) & 0xff);
+			 "DM646x_VPIFCapture_DRIVER_V%s",
+			 VPIF_CAPTURE_VERSION);
 		/* Set video_dev to the video device */
 		ch->video_dev = vfd;
 	}
diff --git a/drivers/media/video/davinci/vpif_capture.h b/drivers/media/video/davinci/vpif_capture.h
index 7a4196dfdce..064550f5ce4 100644
--- a/drivers/media/video/davinci/vpif_capture.h
+++ b/drivers/media/video/davinci/vpif_capture.h
@@ -23,7 +23,6 @@
 
 /* Header files */
 #include <linux/videodev2.h>
-#include <linux/version.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>
 #include <media/videobuf-core.h>
@@ -33,11 +32,7 @@
 #include "vpif.h"
 
 /* Macros */
-#define VPIF_MAJOR_RELEASE		0
-#define VPIF_MINOR_RELEASE		0
-#define VPIF_BUILD			1
-#define VPIF_CAPTURE_VERSION_CODE	((VPIF_MAJOR_RELEASE << 16) | \
-	(VPIF_MINOR_RELEASE << 8) | VPIF_BUILD)
+#define VPIF_CAPTURE_VERSION		"0.0.2"
 
 #define VPIF_VALID_FIELD(field)		(((V4L2_FIELD_ANY == field) || \
 	(V4L2_FIELD_NONE == field)) || \
diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c
index cdf659abdc2..286f0291004 100644
--- a/drivers/media/video/davinci/vpif_display.c
+++ b/drivers/media/video/davinci/vpif_display.c
@@ -29,7 +29,6 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/version.h>
 #include <linux/slab.h>
 
 #include <asm/irq.h>
@@ -47,6 +46,7 @@
 
 MODULE_DESCRIPTION("TI DaVinci VPIF Display driver");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(VPIF_DISPLAY_VERSION);
 
 #define DM646X_V4L2_STD (V4L2_STD_525_60 | V4L2_STD_625_50)
 
@@ -701,7 +701,6 @@ static int vpif_querycap(struct file *file, void  *priv,
 {
 	struct vpif_display_config *config = vpif_dev->platform_data;
 
-	cap->version = VPIF_DISPLAY_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
 	strlcpy(cap->driver, "vpif display", sizeof(cap->driver));
 	strlcpy(cap->bus_info, "Platform", sizeof(cap->bus_info));
@@ -1740,10 +1739,8 @@ static __init int vpif_probe(struct platform_device *pdev)
 		vfd->v4l2_dev = &vpif_obj.v4l2_dev;
 		vfd->release = video_device_release;
 		snprintf(vfd->name, sizeof(vfd->name),
-			 "DM646x_VPIFDisplay_DRIVER_V%d.%d.%d",
-			 (VPIF_DISPLAY_VERSION_CODE >> 16) & 0xff,
-			 (VPIF_DISPLAY_VERSION_CODE >> 8) & 0xff,
-			 (VPIF_DISPLAY_VERSION_CODE) & 0xff);
+			 "DM646x_VPIFDisplay_DRIVER_V%s",
+			 VPIF_DISPLAY_VERSION);
 
 		/* Set video_dev to the video device */
 		ch->video_dev = vfd;
diff --git a/drivers/media/video/davinci/vpif_display.h b/drivers/media/video/davinci/vpif_display.h
index b53aaa88307..5d1936dafed 100644
--- a/drivers/media/video/davinci/vpif_display.h
+++ b/drivers/media/video/davinci/vpif_display.h
@@ -18,7 +18,6 @@
 
 /* Header files */
 #include <linux/videodev2.h>
-#include <linux/version.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>
 #include <media/videobuf-core.h>
@@ -27,12 +26,7 @@
 #include "vpif.h"
 
 /* Macros */
-#define VPIF_MAJOR_RELEASE	(0)
-#define VPIF_MINOR_RELEASE	(0)
-#define VPIF_BUILD		(1)
-
-#define VPIF_DISPLAY_VERSION_CODE \
-	((VPIF_MAJOR_RELEASE << 16) | (VPIF_MINOR_RELEASE << 8) | VPIF_BUILD)
+#define VPIF_DISPLAY_VERSION	"0.0.2"
 
 #define VPIF_VALID_FIELD(field) \
 	(((V4L2_FIELD_ANY == field) || (V4L2_FIELD_NONE == field)) || \