Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

Pulled mainline in order to get the UAPI infrastructure already
merged before I pull in David Howells's UAPI trees for networking.

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 1413 insertions, 0 deletions

diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
new file mode 100644
index 00000000000..307d8c5fb7c
--- /dev/null
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -0,0 +1,1413 @@
+/*
+ *  tm6000-cards.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ *  Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+#include <media/tvaudio.h>
+#include <media/i2c-addr.h>
+#include <media/rc-map.h>
+
+#include "tm6000.h"
+#include "tm6000-regs.h"
+#include "tuner-xc2028.h"
+#include "xc5000.h"
+
+#define TM6000_BOARD_UNKNOWN			0
+#define TM5600_BOARD_GENERIC			1
+#define TM6000_BOARD_GENERIC			2
+#define TM6010_BOARD_GENERIC			3
+#define TM5600_BOARD_10MOONS_UT821		4
+#define TM5600_BOARD_10MOONS_UT330		5
+#define TM6000_BOARD_ADSTECH_DUAL_TV		6
+#define TM6000_BOARD_FREECOM_AND_SIMILAR	7
+#define TM6000_BOARD_ADSTECH_MINI_DUAL_TV	8
+#define TM6010_BOARD_HAUPPAUGE_900H		9
+#define TM6010_BOARD_BEHOLD_WANDER		10
+#define TM6010_BOARD_BEHOLD_VOYAGER		11
+#define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE	12
+#define TM6010_BOARD_TWINHAN_TU501		13
+#define TM6010_BOARD_BEHOLD_WANDER_LITE		14
+#define TM6010_BOARD_BEHOLD_VOYAGER_LITE	15
+#define TM5600_BOARD_TERRATEC_GRABSTER		16
+
+#define is_generic(model) ((model == TM6000_BOARD_UNKNOWN) || \
+			   (model == TM5600_BOARD_GENERIC) || \
+			   (model == TM6000_BOARD_GENERIC) || \
+			   (model == TM6010_BOARD_GENERIC))
+
+#define TM6000_MAXBOARDS        16
+static unsigned int card[]     = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
+
+module_param_array(card,  int, NULL, 0444);
+
+static unsigned long tm6000_devused;
+
+
+struct tm6000_board {
+	char            *name;
+	char		eename[16];		/* EEPROM name */
+	unsigned	eename_size;		/* size of EEPROM name */
+	unsigned	eename_pos;		/* Position where it appears at ROM */
+
+	struct tm6000_capabilities caps;
+
+	enum		tm6000_devtype type;	/* variant of the chipset */
+	int             tuner_type;     /* type of the tuner */
+	int             tuner_addr;     /* tuner address */
+	int             demod_addr;     /* demodulator address */
+
+	struct tm6000_gpio gpio;
+
+	struct tm6000_input	vinput[3];
+	struct tm6000_input	rinput;
+
+	char		*ir_codes;
+};
+
+static struct tm6000_board tm6000_boards[] = {
+	[TM6000_BOARD_UNKNOWN] = {
+		.name         = "Unknown tm6000 video grabber",
+		.caps = {
+			.has_tuner	= 1,
+			.has_eeprom	= 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6000_GPIO_1,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM5600_BOARD_GENERIC] = {
+		.name         = "Generic tm5600 board",
+		.type         = TM5600,
+		.tuner_type   = TUNER_XC2028,
+		.tuner_addr   = 0xc2 >> 1,
+		.caps = {
+			.has_tuner	= 1,
+			.has_eeprom	= 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6000_GPIO_1,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6000_BOARD_GENERIC] = {
+		.name         = "Generic tm6000 board",
+		.tuner_type   = TUNER_XC2028,
+		.tuner_addr   = 0xc2 >> 1,
+		.caps = {
+			.has_tuner	= 1,
+			.has_eeprom	= 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6000_GPIO_1,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6010_BOARD_GENERIC] = {
+		.name         = "Generic tm6010 board",
+		.type         = TM6010,
+		.tuner_type   = TUNER_XC2028,
+		.tuner_addr   = 0xc2 >> 1,
+		.demod_addr   = 0x1e >> 1,
+		.caps = {
+			.has_tuner	= 1,
+			.has_dvb	= 1,
+			.has_zl10353	= 1,
+			.has_eeprom	= 1,
+			.has_remote	= 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6010_GPIO_2,
+			.tuner_on	= TM6010_GPIO_3,
+			.demod_reset	= TM6010_GPIO_1,
+			.demod_on	= TM6010_GPIO_4,
+			.power_led	= TM6010_GPIO_7,
+			.dvb_led	= TM6010_GPIO_5,
+			.ir		= TM6010_GPIO_0,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_SIF1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM5600_BOARD_10MOONS_UT821] = {
+		.name         = "10Moons UT 821",
+		.tuner_type   = TUNER_XC2028,
+		.eename       = { '1', '0', 'M', 'O', 'O', 'N', 'S', '5', '6', '0', '0', 0xff, 0x45, 0x5b},
+		.eename_size  = 14,
+		.eename_pos   = 0x14,
+		.type         = TM5600,
+		.tuner_addr   = 0xc2 >> 1,
+		.caps = {
+			.has_tuner    = 1,
+			.has_eeprom   = 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6000_GPIO_1,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM5600_BOARD_10MOONS_UT330] = {
+		.name         = "10Moons UT 330",
+		.tuner_type   = TUNER_PHILIPS_FQ1216AME_MK4,
+		.tuner_addr   = 0xc8 >> 1,
+		.caps = {
+			.has_tuner    = 1,
+			.has_dvb      = 0,
+			.has_zl10353  = 0,
+			.has_eeprom   = 1,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6000_BOARD_ADSTECH_DUAL_TV] = {
+		.name         = "ADSTECH Dual TV USB",
+		.tuner_type   = TUNER_XC2028,
+		.tuner_addr   = 0xc8 >> 1,
+		.caps = {
+			.has_tuner    = 1,
+			.has_tda9874  = 1,
+			.has_dvb      = 1,
+			.has_zl10353  = 1,
+			.has_eeprom   = 1,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6000_BOARD_FREECOM_AND_SIMILAR] = {
+		.name         = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual",
+		.tuner_type   = TUNER_XC2028, /* has a XC3028 */
+		.tuner_addr   = 0xc2 >> 1,
+		.demod_addr   = 0x1e >> 1,
+		.caps = {
+			.has_tuner    = 1,
+			.has_dvb      = 1,
+			.has_zl10353  = 1,
+			.has_eeprom   = 0,
+			.has_remote   = 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6000_GPIO_4,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = {
+		.name         = "ADSTECH Mini Dual TV USB",
+		.tuner_type   = TUNER_XC2028, /* has a XC3028 */
+		.tuner_addr   = 0xc8 >> 1,
+		.demod_addr   = 0x1e >> 1,
+		.caps = {
+			.has_tuner    = 1,
+			.has_dvb      = 1,
+			.has_zl10353  = 1,
+			.has_eeprom   = 0,
+		},
+		.gpio = {
+			.tuner_reset	= TM6000_GPIO_4,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6010_BOARD_HAUPPAUGE_900H] = {
+		.name         = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick",
+		.eename       = { 'H', 0, 'V', 0, 'R', 0, '9', 0, '0', 0, '0', 0, 'H', 0 },
+		.eename_size  = 14,
+		.eename_pos   = 0x42,
+		.tuner_type   = TUNER_XC2028, /* has a XC3028 */
+		.tuner_addr   = 0xc2 >> 1,
+		.demod_addr   = 0x1e >> 1,
+		.type         = TM6010,
+		.ir_codes = RC_MAP_HAUPPAUGE,
+		.caps = {
+			.has_tuner    = 1,
+			.has_dvb      = 1,
+			.has_zl10353  = 1,
+			.has_eeprom   = 1,
+			.has_remote   = 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6010_GPIO_2,
+			.tuner_on	= TM6010_GPIO_3,
+			.demod_reset	= TM6010_GPIO_1,
+			.demod_on	= TM6010_GPIO_4,
+			.power_led	= TM6010_GPIO_7,
+			.dvb_led	= TM6010_GPIO_5,
+			.ir		= TM6010_GPIO_0,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_SIF1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6010_BOARD_BEHOLD_WANDER] = {
+		.name         = "Beholder Wander DVB-T/TV/FM USB2.0",
+		.tuner_type   = TUNER_XC5000,
+		.tuner_addr   = 0xc2 >> 1,
+		.demod_addr   = 0x1e >> 1,
+		.type         = TM6010,
+		.caps = {
+			.has_tuner      = 1,
+			.has_dvb        = 1,
+			.has_zl10353    = 1,
+			.has_eeprom     = 1,
+			.has_remote     = 1,
+			.has_radio	= 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6010_GPIO_0,
+			.demod_reset	= TM6010_GPIO_1,
+			.power_led	= TM6010_GPIO_6,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_SIF1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+		.rinput = {
+			.type	= TM6000_INPUT_RADIO,
+			.amux	= TM6000_AMUX_ADC1,
+		},
+	},
+	[TM6010_BOARD_BEHOLD_VOYAGER] = {
+		.name         = "Beholder Voyager TV/FM USB2.0",
+		.tuner_type   = TUNER_XC5000,
+		.tuner_addr   = 0xc2 >> 1,
+		.type         = TM6010,
+		.caps = {
+			.has_tuner      = 1,
+			.has_dvb        = 0,
+			.has_zl10353    = 0,
+			.has_eeprom     = 1,
+			.has_remote     = 1,
+			.has_radio	= 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6010_GPIO_0,
+			.power_led	= TM6010_GPIO_6,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_SIF1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+		.rinput = {
+			.type	= TM6000_INPUT_RADIO,
+			.amux	= TM6000_AMUX_ADC1,
+		},
+	},
+	[TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = {
+		.name         = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick",
+		.tuner_type   = TUNER_XC2028, /* has a XC3028 */
+		.tuner_addr   = 0xc2 >> 1,
+		.demod_addr   = 0x1e >> 1,
+		.type         = TM6010,
+		.caps = {
+			.has_tuner    = 1,
+			.has_dvb      = 1,
+			.has_zl10353  = 1,
+			.has_eeprom   = 1,
+			.has_remote   = 1,
+			.has_radio    = 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6010_GPIO_2,
+			.tuner_on	= TM6010_GPIO_3,
+			.demod_reset	= TM6010_GPIO_1,
+			.demod_on	= TM6010_GPIO_4,
+			.power_led	= TM6010_GPIO_7,
+			.dvb_led	= TM6010_GPIO_5,
+			.ir		= TM6010_GPIO_0,
+		},
+		.ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_SIF1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+		.rinput = {
+			.type = TM6000_INPUT_RADIO,
+			.amux = TM6000_AMUX_SIF1,
+		},
+	},
+	[TM5600_BOARD_TERRATEC_GRABSTER] = {
+		.name         = "Terratec Grabster AV 150/250 MX",
+		.type         = TM5600,
+		.tuner_type   = TUNER_ABSENT,
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6010_BOARD_TWINHAN_TU501] = {
+		.name         = "Twinhan TU501(704D1)",
+		.tuner_type   = TUNER_XC2028, /* has a XC3028 */
+		.tuner_addr   = 0xc2 >> 1,
+		.demod_addr   = 0x1e >> 1,
+		.type         = TM6010,
+		.caps = {
+			.has_tuner    = 1,
+			.has_dvb      = 1,
+			.has_zl10353  = 1,
+			.has_eeprom   = 1,
+			.has_remote   = 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6010_GPIO_2,
+			.tuner_on	= TM6010_GPIO_3,
+			.demod_reset	= TM6010_GPIO_1,
+			.demod_on	= TM6010_GPIO_4,
+			.power_led	= TM6010_GPIO_7,
+			.dvb_led	= TM6010_GPIO_5,
+			.ir		= TM6010_GPIO_0,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_SIF1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6010_BOARD_BEHOLD_WANDER_LITE] = {
+		.name         = "Beholder Wander Lite DVB-T/TV/FM USB2.0",
+		.tuner_type   = TUNER_XC5000,
+		.tuner_addr   = 0xc2 >> 1,
+		.demod_addr   = 0x1e >> 1,
+		.type         = TM6010,
+		.caps = {
+			.has_tuner      = 1,
+			.has_dvb        = 1,
+			.has_zl10353    = 1,
+			.has_eeprom     = 1,
+			.has_remote     = 0,
+			.has_radio	= 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6010_GPIO_0,
+			.demod_reset	= TM6010_GPIO_1,
+			.power_led	= TM6010_GPIO_6,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_SIF1,
+			},
+		},
+		.rinput = {
+			.type	= TM6000_INPUT_RADIO,
+			.amux	= TM6000_AMUX_ADC1,
+		},
+	},
+	[TM6010_BOARD_BEHOLD_VOYAGER_LITE] = {
+		.name         = "Beholder Voyager Lite TV/FM USB2.0",
+		.tuner_type   = TUNER_XC5000,
+		.tuner_addr   = 0xc2 >> 1,
+		.type         = TM6010,
+		.caps = {
+			.has_tuner      = 1,
+			.has_dvb        = 0,
+			.has_zl10353    = 0,
+			.has_eeprom     = 1,
+			.has_remote     = 0,
+			.has_radio	= 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6010_GPIO_0,
+			.power_led	= TM6010_GPIO_6,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_SIF1,
+			},
+		},
+		.rinput = {
+			.type	= TM6000_INPUT_RADIO,
+			.amux	= TM6000_AMUX_ADC1,
+		},
+	},
+};
+
+/* table of devices that work with this driver */
+static struct usb_device_id tm6000_id_table[] = {
+	{ USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_GENERIC },
+	{ USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC },
+	{ USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV },
+	{ USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR },
+	{ USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV },
+	{ USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+	{ USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+	{ USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+	{ USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+	{ USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER },
+	{ USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER },
+	{ USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
+	{ USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
+	{ USB_DEVICE(0x0ccd, 0x0079), .driver_info = TM5600_BOARD_TERRATEC_GRABSTER },
+	{ USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+	{ USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+	{ USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+	{ USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+	{ USB_DEVICE(0x6000, 0xdec2), .driver_info = TM6010_BOARD_BEHOLD_WANDER_LITE },
+	{ USB_DEVICE(0x6000, 0xdec3), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER_LITE },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, tm6000_id_table);
+
+/* Control power led for show some activity */
+void tm6000_flash_led(struct tm6000_core *dev, u8 state)
+{
+	/* Power LED unconfigured */
+	if (!dev->gpio.power_led)
+		return;
+
+	/* ON Power LED */
+	if (state) {
+		switch (dev->model) {
+		case TM6010_BOARD_HAUPPAUGE_900H:
+		case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+		case TM6010_BOARD_TWINHAN_TU501:
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x00);
+			break;
+		case TM6010_BOARD_BEHOLD_WANDER:
+		case TM6010_BOARD_BEHOLD_VOYAGER:
+		case TM6010_BOARD_BEHOLD_WANDER_LITE:
+		case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x01);
+			break;
+		}
+	}
+	/* OFF Power LED */
+	else {
+		switch (dev->model) {
+		case TM6010_BOARD_HAUPPAUGE_900H:
+		case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+		case TM6010_BOARD_TWINHAN_TU501:
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x01);
+			break;
+		case TM6010_BOARD_BEHOLD_WANDER:
+		case TM6010_BOARD_BEHOLD_VOYAGER:
+		case TM6010_BOARD_BEHOLD_WANDER_LITE:
+		case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x00);
+			break;
+		}
+	}
+}
+
+/* Tuner callback to provide the proper gpio changes needed for xc5000 */
+int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
+{
+	int rc = 0;
+	struct tm6000_core *dev = ptr;
+
+	if (dev->tuner_type != TUNER_XC5000)
+		return 0;
+
+	switch (command) {
+	case XC5000_TUNER_RESET:
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+			       dev->gpio.tuner_reset, 0x01);
+		msleep(15);
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+			       dev->gpio.tuner_reset, 0x00);
+		msleep(15);
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+			       dev->gpio.tuner_reset, 0x01);
+		break;
+	}
+	return rc;
+}
+EXPORT_SYMBOL_GPL(tm6000_xc5000_callback);
+
+/* Tuner callback to provide the proper gpio changes needed for xc2028 */
+
+int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
+{
+	int rc = 0;
+	struct tm6000_core *dev = ptr;
+
+	if (dev->tuner_type != TUNER_XC2028)
+		return 0;
+
+	switch (command) {
+	case XC2028_RESET_CLK:
+		tm6000_ir_wait(dev, 0);
+
+		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
+					0x02, arg);
+		msleep(10);
+		rc = tm6000_i2c_reset(dev, 10);
+		break;
+	case XC2028_TUNER_RESET:
+		/* Reset codes during load firmware */
+		switch (arg) {
+		case 0:
+			/* newer tuner can faster reset */
+			switch (dev->model) {
+			case TM5600_BOARD_10MOONS_UT821:
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x01);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       0x300, 0x01);
+				msleep(10);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x00);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       0x300, 0x00);
+				msleep(10);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x01);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       0x300, 0x01);
+				break;
+			case TM6010_BOARD_HAUPPAUGE_900H:
+			case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+			case TM6010_BOARD_TWINHAN_TU501:
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x01);
+				msleep(60);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x00);
+				msleep(75);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x01);
+				msleep(60);
+				break;
+			default:
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x00);
+				msleep(130);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x01);
+				msleep(130);
+				break;
+			}
+
+			tm6000_ir_wait(dev, 1);
+			break;
+		case 1:
+			tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
+						0x02, 0x01);
+			msleep(10);
+			break;
+		case 2:
+			rc = tm6000_i2c_reset(dev, 100);
+			break;
+		}
+		break;
+	case XC2028_I2C_FLUSH:
+		tm6000_set_reg(dev, REQ_50_SET_START, 0, 0);
+		tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0);
+		break;
+	}
+	return rc;
+}
+EXPORT_SYMBOL_GPL(tm6000_tuner_callback);
+
+int tm6000_cards_setup(struct tm6000_core *dev)
+{
+	/*
+	 * Board-specific initialization sequence. Handles all GPIO
+	 * initialization sequences that are board-specific.
+	 * Up to now, all found devices use GPIO1 and GPIO4 at the same way.
+	 * Probably, they're all based on some reference device. Due to that,
+	 * there's a common routine at the end to handle those GPIO's. Devices
+	 * that use different pinups or init sequences can just return at
+	 * the board-specific session.
+	 */
+	switch (dev->model) {
+	case TM6010_BOARD_HAUPPAUGE_900H:
+	case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+	case TM6010_BOARD_TWINHAN_TU501:
+	case TM6010_BOARD_GENERIC:
+		/* Turn xceive 3028 on */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01);
+		msleep(15);
+		/* Turn zarlink zl10353 on */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
+		msleep(15);
+		/* Reset zarlink zl10353 */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
+		msleep(50);
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
+		msleep(15);
+		/* Turn zarlink zl10353 off */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01);
+		msleep(15);
+		/* ir ? */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01);
+		msleep(15);
+		/* Power led on (blue) */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00);
+		msleep(15);
+		/* DVB led off (orange) */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01);
+		msleep(15);
+		/* Turn zarlink zl10353 on */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
+		msleep(15);
+		break;
+	case TM6010_BOARD_BEHOLD_WANDER:
+	case TM6010_BOARD_BEHOLD_WANDER_LITE:
+		/* Power led on (blue) */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
+		msleep(15);
+		/* Reset zarlink zl10353 */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
+		msleep(50);
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
+		msleep(15);
+		break;
+	case TM6010_BOARD_BEHOLD_VOYAGER:
+	case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
+		/* Power led on (blue) */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
+		msleep(15);
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * Default initialization. Most of the devices seem to use GPIO1
+	 * and GPIO4.on the same way, so, this handles the common sequence
+	 * used by most devices.
+	 * If a device uses a different sequence or different GPIO pins for
+	 * reset, just add the code at the board-specific part
+	 */
+
+	if (dev->gpio.tuner_reset) {
+		int rc;
+		int i;
+
+		for (i = 0; i < 2; i++) {
+			rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+						dev->gpio.tuner_reset, 0x00);
+			if (rc < 0) {
+				printk(KERN_ERR "Error %i doing tuner reset\n", rc);
+				return rc;
+			}
+
+			msleep(10); /* Just to be conservative */
+			rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+						dev->gpio.tuner_reset, 0x01);
+			if (rc < 0) {
+				printk(KERN_ERR "Error %i doing tuner reset\n", rc);
+				return rc;
+			}
+		}
+	} else {
+		printk(KERN_ERR "Tuner reset is not configured\n");
+		return -1;
+	}
+
+	msleep(50);
+
+	return 0;
+};
+
+static void tm6000_config_tuner(struct tm6000_core *dev)
+{
+	struct tuner_setup tun_setup;
+
+	/* Load tuner module */
+	v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+		"tuner", dev->tuner_addr, NULL);
+
+	memset(&tun_setup, 0, sizeof(tun_setup));
+	tun_setup.type = dev->tuner_type;
+	tun_setup.addr = dev->tuner_addr;
+
+	tun_setup.mode_mask = 0;
+	if (dev->caps.has_tuner)
+		tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO);
+
+	switch (dev->tuner_type) {
+	case TUNER_XC2028:
+		tun_setup.tuner_callback = tm6000_tuner_callback;
+		break;
+	case TUNER_XC5000:
+		tun_setup.tuner_callback = tm6000_xc5000_callback;
+		break;
+	}
+
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
+
+	switch (dev->tuner_type) {
+	case TUNER_XC2028: {
+		struct v4l2_priv_tun_config xc2028_cfg;
+		struct xc2028_ctrl ctl;
+
+		memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
+		memset(&ctl, 0, sizeof(ctl));
+
+		ctl.demod = XC3028_FE_ZARLINK456;
+
+		xc2028_cfg.tuner = TUNER_XC2028;
+		xc2028_cfg.priv  = &ctl;
+
+		switch (dev->model) {
+		case TM6010_BOARD_HAUPPAUGE_900H:
+		case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+		case TM6010_BOARD_TWINHAN_TU501:
+			ctl.max_len = 80;
+			ctl.fname = "xc3028L-v36.fw";
+			break;
+		default:
+			if (dev->dev_type == TM6010)
+				ctl.fname = "xc3028-v27.fw";
+			else
+				ctl.fname = "xc3028-v24.fw";
+		}
+
+		printk(KERN_INFO "Setting firmware parameters for xc2028\n");
+		v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
+				     &xc2028_cfg);
+
+		}
+		break;
+	case TUNER_XC5000:
+		{
+		struct v4l2_priv_tun_config  xc5000_cfg;
+		struct xc5000_config ctl = {
+			.i2c_address = dev->tuner_addr,
+			.if_khz      = 4570,
+			.radio_input = XC5000_RADIO_FM1_MONO,
+			};
+
+		xc5000_cfg.tuner = TUNER_XC5000;
+		xc5000_cfg.priv  = &ctl;
+
+		v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
+				     &xc5000_cfg);
+		}
+		break;
+	default:
+		printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n");
+		break;
+	}
+}
+
+static int fill_board_specific_data(struct tm6000_core *dev)
+{
+	int rc;
+
+	dev->dev_type   = tm6000_boards[dev->model].type;
+	dev->tuner_type = tm6000_boards[dev->model].tuner_type;
+	dev->tuner_addr = tm6000_boards[dev->model].tuner_addr;
+
+	dev->gpio = tm6000_boards[dev->model].gpio;
+
+	dev->ir_codes = tm6000_boards[dev->model].ir_codes;
+
+	dev->demod_addr = tm6000_boards[dev->model].demod_addr;
+
+	dev->caps = tm6000_boards[dev->model].caps;
+
+	dev->vinput[0] = tm6000_boards[dev->model].vinput[0];
+	dev->vinput[1] = tm6000_boards[dev->model].vinput[1];
+	dev->vinput[2] = tm6000_boards[dev->model].vinput[2];
+	dev->rinput = tm6000_boards[dev->model].rinput;
+
+	/* setup per-model quirks */
+	switch (dev->model) {
+	case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+	case TM6010_BOARD_HAUPPAUGE_900H:
+		dev->quirks |= TM6000_QUIRK_NO_USB_DELAY;
+		break;
+
+	default:
+		break;
+	}
+
+	/* initialize hardware */
+	rc = tm6000_init(dev);
+	if (rc < 0)
+		return rc;
+
+	return v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev);
+}
+
+
+static void use_alternative_detection_method(struct tm6000_core *dev)
+{
+	int i, model = -1;
+
+	if (!dev->eedata_size)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(tm6000_boards); i++) {
+		if (!tm6000_boards[i].eename_size)
+			continue;
+		if (dev->eedata_size < tm6000_boards[i].eename_pos +
+				       tm6000_boards[i].eename_size)
+			continue;
+
+		if (!memcmp(&dev->eedata[tm6000_boards[i].eename_pos],
+			    tm6000_boards[i].eename,
+			    tm6000_boards[i].eename_size)) {
+			model = i;
+			break;
+		}
+	}
+	if (model < 0) {
+		printk(KERN_INFO "Device has eeprom but is currently unknown\n");
+		return;
+	}
+
+	dev->model = model;
+
+	printk(KERN_INFO "Device identified via eeprom as %s (type = %d)\n",
+	       tm6000_boards[model].name, model);
+}
+
+#if defined(CONFIG_MODULES) && defined(MODULE)
+static void request_module_async(struct work_struct *work)
+{
+	struct tm6000_core *dev = container_of(work, struct tm6000_core,
+					       request_module_wk);
+
+	request_module("tm6000-alsa");
+
+	if (dev->caps.has_dvb)
+		request_module("tm6000-dvb");
+}
+
+static void request_modules(struct tm6000_core *dev)
+{
+	INIT_WORK(&dev->request_module_wk, request_module_async);
+	schedule_work(&dev->request_module_wk);
+}
+
+static void flush_request_modules(struct tm6000_core *dev)
+{
+	flush_work(&dev->request_module_wk);
+}
+#else
+#define request_modules(dev)
+#define flush_request_modules(dev)
+#endif /* CONFIG_MODULES */
+
+static int tm6000_init_dev(struct tm6000_core *dev)
+{
+	struct v4l2_frequency f;
+	int rc = 0;
+
+	mutex_init(&dev->lock);
+	mutex_lock(&dev->lock);
+
+	if (!is_generic(dev->model)) {
+		rc = fill_board_specific_data(dev);
+		if (rc < 0)
+			goto err;
+
+		/* register i2c bus */
+		rc = tm6000_i2c_register(dev);
+		if (rc < 0)
+			goto err;
+	} else {
+		/* register i2c bus */
+		rc = tm6000_i2c_register(dev);
+		if (rc < 0)
+			goto err;
+
+		use_alternative_detection_method(dev);
+
+		rc = fill_board_specific_data(dev);
+		if (rc < 0)
+			goto err;
+	}
+
+	/* Default values for STD and resolutions */
+	dev->width = 720;
+	dev->height = 480;
+	dev->norm = V4L2_STD_PAL_M;
+
+	/* Configure tuner */
+	tm6000_config_tuner(dev);
+
+	/* Set video standard */
+	v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
+
+	/* Set tuner frequency - also loads firmware on xc2028/xc3028 */
+	f.tuner = 0;
+	f.type = V4L2_TUNER_ANALOG_TV;
+	f.frequency = 3092;	/* 193.25 MHz */
+	dev->freq = f.frequency;
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
+
+	if (dev->caps.has_tda9874)
+		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+			"tvaudio", I2C_ADDR_TDA9874, NULL);
+
+	/* register and initialize V4L2 */
+	rc = tm6000_v4l2_register(dev);
+	if (rc < 0)
+		goto err;
+
+	tm6000_add_into_devlist(dev);
+	tm6000_init_extension(dev);
+
+	tm6000_ir_init(dev);
+
+	request_modules(dev);
+
+	mutex_unlock(&dev->lock);
+	return 0;
+
+err:
+	mutex_unlock(&dev->lock);
+	return rc;
+}
+
+/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
+#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
+
+static void get_max_endpoint(struct usb_device *udev,
+			     struct usb_host_interface *alt,
+			     char *msgtype,
+			     struct usb_host_endpoint *curr_e,
+			     struct tm6000_endpoint *tm_ep)
+{
+	u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize);
+	unsigned int size = tmp & 0x7ff;
+
+	if (udev->speed == USB_SPEED_HIGH)
+		size = size * hb_mult(tmp);
+
+	if (size > tm_ep->maxsize) {
+		tm_ep->endp = curr_e;
+		tm_ep->maxsize = size;
+		tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber;
+		tm_ep->bAlternateSetting = alt->desc.bAlternateSetting;
+
+		printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n",
+					msgtype, curr_e->desc.bEndpointAddress,
+					size);
+	}
+}
+
+/*
+ * tm6000_usb_probe()
+ * checks for supported devices
+ */
+static int tm6000_usb_probe(struct usb_interface *interface,
+			    const struct usb_device_id *id)
+{
+	struct usb_device *usbdev;
+	struct tm6000_core *dev = NULL;
+	int i, rc = 0;
+	int nr = 0;
+	char *speed;
+
+	usbdev = usb_get_dev(interface_to_usbdev(interface));
+
+	/* Selects the proper interface */
+	rc = usb_set_interface(usbdev, 0, 1);
+	if (rc < 0)
+		goto err;
+
+	/* Check to see next free device and mark as used */
+	nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS);
+	if (nr >= TM6000_MAXBOARDS) {
+		printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS);
+		usb_put_dev(usbdev);
+		return -ENOMEM;
+	}
+
+	/* Create and initialize dev struct */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL) {
+		printk(KERN_ERR "tm6000" ": out of memory!\n");
+		usb_put_dev(usbdev);
+		return -ENOMEM;
+	}
+	spin_lock_init(&dev->slock);
+	mutex_init(&dev->usb_lock);
+
+	/* Increment usage count */
+	set_bit(nr, &tm6000_devused);
+	snprintf(dev->name, 29, "tm6000 #%d", nr);
+
+	dev->model = id->driver_info;
+	if (card[nr] < ARRAY_SIZE(tm6000_boards))
+		dev->model = card[nr];
+
+	dev->udev = usbdev;
+	dev->devno = nr;
+
+	switch (usbdev->speed) {
+	case USB_SPEED_LOW:
+		speed = "1.5";
+		break;
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_FULL:
+		speed = "12";
+		break;
+	case USB_SPEED_HIGH:
+		speed = "480";
+		break;
+	default:
+		speed = "unknown";
+	}
+
+	/* Get endpoints */
+	for (i = 0; i < interface->num_altsetting; i++) {
+		int ep;
+
+		for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
+			struct usb_host_endpoint	*e;
+			int dir_out;
+
+			e = &interface->altsetting[i].endpoint[ep];
+
+			dir_out = ((e->desc.bEndpointAddress &
+					USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
+
+			printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n",
+			       i,
+			       interface->altsetting[i].desc.bInterfaceNumber,
+			       interface->altsetting[i].desc.bInterfaceClass);
+
+			switch (e->desc.bmAttributes) {
+			case USB_ENDPOINT_XFER_BULK:
+				if (!dir_out) {
+					get_max_endpoint(usbdev,
+							 &interface->altsetting[i],
+							 "Bulk IN", e,
+							 &dev->bulk_in);
+				} else {
+					get_max_endpoint(usbdev,
+							 &interface->altsetting[i],
+							 "Bulk OUT", e,
+							 &dev->bulk_out);
+				}
+				break;
+			case USB_ENDPOINT_XFER_ISOC:
+				if (!dir_out) {
+					get_max_endpoint(usbdev,
+							 &interface->altsetting[i],
+							 "ISOC IN", e,
+							 &dev->isoc_in);
+				} else {
+					get_max_endpoint(usbdev,
+							 &interface->altsetting[i],
+							 "ISOC OUT", e,
+							 &dev->isoc_out);
+				}
+				break;
+			case USB_ENDPOINT_XFER_INT:
+				if (!dir_out) {
+					get_max_endpoint(usbdev,
+							&interface->altsetting[i],
+							"INT IN", e,
+							&dev->int_in);
+				} else {
+					get_max_endpoint(usbdev,
+							&interface->altsetting[i],
+							"INT OUT", e,
+							&dev->int_out);
+				}
+				break;
+			}
+		}
+	}
+
+
+	printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n",
+		speed,
+		le16_to_cpu(dev->udev->descriptor.idVendor),
+		le16_to_cpu(dev->udev->descriptor.idProduct),
+		interface->altsetting->desc.bInterfaceNumber);
+
+/* check if the the device has the iso in endpoint at the correct place */
+	if (!dev->isoc_in.endp) {
+		printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
+		rc = -ENODEV;
+
+		goto err;
+	}
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, dev);
+
+	printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name);
+
+	rc = tm6000_init_dev(dev);
+	if (rc < 0)
+		goto err;
+
+	return 0;
+
+err:
+	printk(KERN_ERR "tm6000: Error %d while registering\n", rc);
+
+	clear_bit(nr, &tm6000_devused);
+	usb_put_dev(usbdev);
+
+	kfree(dev);
+	return rc;
+}
+
+/*
+ * tm6000_usb_disconnect()
+ * called when the device gets diconencted
+ * video device will be unregistered on v4l2_close in case it is still open
+ */
+static void tm6000_usb_disconnect(struct usb_interface *interface)
+{
+	struct tm6000_core *dev = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
+
+	if (!dev)
+		return;
+
+	printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name);
+
+	flush_request_modules(dev);
+
+	tm6000_ir_fini(dev);
+
+	if (dev->gpio.power_led) {
+		switch (dev->model) {
+		case TM6010_BOARD_HAUPPAUGE_900H:
+		case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+		case TM6010_BOARD_TWINHAN_TU501:
+			/* Power led off */
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x01);
+			msleep(15);
+			break;
+		case TM6010_BOARD_BEHOLD_WANDER:
+		case TM6010_BOARD_BEHOLD_VOYAGER:
+		case TM6010_BOARD_BEHOLD_WANDER_LITE:
+		case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
+			/* Power led off */
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x00);
+			msleep(15);
+			break;
+		}
+	}
+	tm6000_v4l2_unregister(dev);
+
+	tm6000_i2c_unregister(dev);
+
+	v4l2_device_unregister(&dev->v4l2_dev);
+
+	dev->state |= DEV_DISCONNECTED;
+
+	usb_put_dev(dev->udev);
+
+	tm6000_close_extension(dev);
+	tm6000_remove_from_devlist(dev);
+
+	clear_bit(dev->devno, &tm6000_devused);
+	kfree(dev);
+}
+
+static struct usb_driver tm6000_usb_driver = {
+		.name = "tm6000",
+		.probe = tm6000_usb_probe,
+		.disconnect = tm6000_usb_disconnect,
+		.id_table = tm6000_id_table,
+};
+
+module_usb_driver(tm6000_usb_driver);
+
+MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter");
+MODULE_AUTHOR("Mauro Carvalho Chehab");
+MODULE_LICENSE("GPL");