Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb

73 files changed, 2548 insertions, 662 deletions

diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 21a9045b3ef..0b940e152b7 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -298,7 +298,7 @@ static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct fir
 }
 
 static int lgdt3303_pll_set(struct dvb_frontend* fe,
-		            struct dvb_frontend_parameters* params)
+			    struct dvb_frontend_parameters* params)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
 	u8 buf[4];
@@ -485,12 +485,16 @@ static struct stv0297_config alps_tdee4_stv0297_config = {
 /* try to figure out the frontend, each card/box can have on of the following list */
 int flexcop_frontend_init(struct flexcop_device *fc)
 {
+	struct dvb_frontend_ops *ops;
+
 	/* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
 	if ((fc->fe = stv0299_attach(&samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) {
-		fc->fe->ops->set_voltage = flexcop_set_voltage;
+		ops = fc->fe->ops;
+
+		ops->set_voltage = flexcop_set_voltage;
 
-		fc->fe_sleep             = fc->fe->ops->sleep;
-		fc->fe->ops->sleep       = flexcop_sleep;
+		fc->fe_sleep             = ops->sleep;
+		ops->sleep               = flexcop_sleep;
 
 		fc->dev_type          = FC_SKY;
 		info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address);
@@ -522,15 +526,17 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 	} else
 	/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
 	if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
-		fc->fe->ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
-		fc->fe->ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
-		fc->fe->ops->set_tone               = flexcop_set_tone;
-		fc->fe->ops->set_voltage            = flexcop_set_voltage;
+		ops = fc->fe->ops;
+
+		ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
+		ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
+		ops->set_tone               = flexcop_set_tone;
+		ops->set_voltage            = flexcop_set_voltage;
 
-		fc->fe_sleep                        = fc->fe->ops->sleep;
-		fc->fe->ops->sleep                  = flexcop_sleep;
+		fc->fe_sleep                = ops->sleep;
+		ops->sleep                  = flexcop_sleep;
 
-		fc->dev_type                        = FC_SKY_OLD;
+		fc->dev_type                = FC_SKY_OLD;
 		info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address);
 	}
 
@@ -540,8 +546,9 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 	} else {
 		if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
 			err("frontend registration failed!");
-			if (fc->fe->ops->release != NULL)
-				fc->fe->ops->release(fc->fe);
+			ops = fc->fe->ops;
+			if (ops->release != NULL)
+				ops->release(fc->fe);
 			fc->fe = NULL;
 			return -EINVAL;
 		}
diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h
index 23cc6431e2b..3153f9513c6 100644
--- a/drivers/media/dvb/b2c2/flexcop-reg.h
+++ b/drivers/media/dvb/b2c2/flexcop-reg.h
@@ -39,11 +39,13 @@ extern const char *flexcop_device_names[];
 /* FlexCop IBI Registers */
 #if defined(__LITTLE_ENDIAN)
 	#include "flexcop_ibi_value_le.h"
-#elif defined(__BIG_ENDIAN)
+#else
+#if defined(__BIG_ENDIAN)
 	#include "flexcop_ibi_value_be.h"
 #else
 	#error no endian defined
 #endif
+#endif
 
 #define fc_data_Tag_ID_DVB  0x3e
 #define fc_data_Tag_ID_ATSC 0x3f
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index 8977c7a313d..3a2ff1cc24b 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -1341,30 +1341,40 @@ static int dst_read_snr(struct dvb_frontend *fe, u16 *snr)
 	return 0;
 }
 
-static int dst_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
+static int dst_set_frontend(struct dvb_frontend* fe,
+			    struct dvb_frontend_parameters* p,
+			    unsigned int mode_flags,
+			    int *delay,
+			    fe_status_t *status)
 {
 	struct dst_state *state = fe->demodulator_priv;
 
-	dst_set_freq(state, p->frequency);
-	dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency);
+	if (p != NULL) {
+		dst_set_freq(state, p->frequency);
+		dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency);
 
-	if (state->dst_type == DST_TYPE_IS_SAT) {
-		if (state->type_flags & DST_TYPE_HAS_OBS_REGS)
-			dst_set_inversion(state, p->inversion);
-		dst_set_fec(state, p->u.qpsk.fec_inner);
-		dst_set_symbolrate(state, p->u.qpsk.symbol_rate);
-		dst_set_polarization(state);
-		dprintk(verbose, DST_DEBUG, 1, "Set Symbolrate=[%d]", p->u.qpsk.symbol_rate);
-
-	} else if (state->dst_type == DST_TYPE_IS_TERR)
-		dst_set_bandwidth(state, p->u.ofdm.bandwidth);
-	else if (state->dst_type == DST_TYPE_IS_CABLE) {
-		dst_set_fec(state, p->u.qam.fec_inner);
-		dst_set_symbolrate(state, p->u.qam.symbol_rate);
-		dst_set_modulation(state, p->u.qam.modulation);
+		if (state->dst_type == DST_TYPE_IS_SAT) {
+			if (state->type_flags & DST_TYPE_HAS_OBS_REGS)
+				dst_set_inversion(state, p->inversion);
+			dst_set_fec(state, p->u.qpsk.fec_inner);
+			dst_set_symbolrate(state, p->u.qpsk.symbol_rate);
+			dst_set_polarization(state);
+			dprintk(verbose, DST_DEBUG, 1, "Set Symbolrate=[%d]", p->u.qpsk.symbol_rate);
+
+		} else if (state->dst_type == DST_TYPE_IS_TERR)
+			dst_set_bandwidth(state, p->u.ofdm.bandwidth);
+		else if (state->dst_type == DST_TYPE_IS_CABLE) {
+			dst_set_fec(state, p->u.qam.fec_inner);
+			dst_set_symbolrate(state, p->u.qam.symbol_rate);
+			dst_set_modulation(state, p->u.qam.modulation);
+		}
+		dst_write_tuna(fe);
 	}
-	dst_write_tuna(fe);
 
+	if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
+		dst_read_status(fe, status);
+
+	*delay = HZ/10;
 	return 0;
 }
 
@@ -1445,7 +1455,7 @@ static struct dvb_frontend_ops dst_dvbt_ops = {
 
 	.release = dst_release,
 	.init = dst_init,
-	.set_frontend = dst_set_frontend,
+	.tune = dst_set_frontend,
 	.get_frontend = dst_get_frontend,
 	.read_status = dst_read_status,
 	.read_signal_strength = dst_read_signal_strength,
@@ -1469,7 +1479,7 @@ static struct dvb_frontend_ops dst_dvbs_ops = {
 
 	.release = dst_release,
 	.init = dst_init,
-	.set_frontend = dst_set_frontend,
+	.tune = dst_set_frontend,
 	.get_frontend = dst_get_frontend,
 	.read_status = dst_read_status,
 	.read_signal_strength = dst_read_signal_strength,
@@ -1496,7 +1506,7 @@ static struct dvb_frontend_ops dst_dvbc_ops = {
 
 	.release = dst_release,
 	.init = dst_init,
-	.set_frontend = dst_set_frontend,
+	.tune = dst_set_frontend,
 	.get_frontend = dst_get_frontend,
 	.read_status = dst_read_status,
 	.read_signal_strength = dst_read_signal_strength,
diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c
index 2239651969c..c650b4bf7f5 100644
--- a/drivers/media/dvb/bt8xx/dst_ca.c
+++ b/drivers/media/dvb/bt8xx/dst_ca.c
@@ -283,16 +283,17 @@ static int handle_dst_tag(struct dst_state *state, struct ca_msg *p_ca_message,
 		hw_buffer->msg[4] = 0x03;
 		hw_buffer->msg[5] = length & 0xff;
 		hw_buffer->msg[6] = 0x00;
+
 		/*
 		 *	Need to compute length for EN50221 section 8.3.2, for the time being
 		 *	assuming 8.3.2 is not applicable
 		 */
 		memcpy(&hw_buffer->msg[7], &p_ca_message->msg[4], length);
 	}
+
 	return 0;
 }
 
-
 static int write_to_8820(struct dst_state *state, struct ca_msg *hw_buffer, u8 length, u8 reply)
 {
 	if ((dst_put_ci(state, hw_buffer->msg, length, hw_buffer->msg, reply)) < 0) {
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index 77977e9c013..01b4e0aac04 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -600,7 +600,6 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
 	struct dst_state* state = NULL;
 
 	switch(type) {
-#ifdef BTTV_BOARD_DVICO_DVBT_LITE
 	case BTTV_BOARD_DVICO_DVBT_LITE:
 		card->fe = mt352_attach(&thomson_dtt7579_config, card->i2c_adapter);
 		if (card->fe != NULL) {
@@ -608,22 +607,15 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
 			card->fe->ops->info.frequency_max = 862000000;
 		}
 		break;
-#endif
 
-#ifdef BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE
 	case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
 		lgdt330x_reset(card);
 		card->fe = lgdt330x_attach(&tdvs_tua6034_config, card->i2c_adapter);
 		if (card->fe != NULL)
 			dprintk ("dvb_bt8xx: lgdt330x detected\n");
 		break;
-#endif
 
-#ifdef BTTV_BOARD_TWINHAN_VP3021
-	case BTTV_BOARD_TWINHAN_VP3021:
-#else
 	case BTTV_BOARD_NEBULA_DIGITV:
-#endif
 		/*
 		 * It is possible to determine the correct frontend using the I2C bus (see the Nebula SDK);
 		 * this would be a cleaner solution than trying each frontend in turn.
@@ -812,9 +804,7 @@ static int dvb_bt8xx_probe(struct device *dev)
 		card->irq_err_ignore = 0;
 		break;
 
-#ifdef BTTV_BOARD_DVICO_DVBT_LITE
 	case BTTV_BOARD_DVICO_DVBT_LITE:
-#endif
 		card->gpio_mode = 0x0400C060;
 		card->op_sync_orin = 0;
 		card->irq_err_ignore = 0;
@@ -823,19 +813,13 @@ static int dvb_bt8xx_probe(struct device *dev)
 		 * DA_APP(parallel) */
 		break;
 
-#ifdef BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE
 	case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
-#endif
 		card->gpio_mode = 0x0400c060;
 		card->op_sync_orin = BT878_RISC_SYNC_MASK;
 		card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
 		break;
 
-#ifdef BTTV_BOARD_TWINHAN_VP3021
-	case BTTV_BOARD_TWINHAN_VP3021:
-#else
 	case BTTV_BOARD_NEBULA_DIGITV:
-#endif
 	case BTTV_BOARD_AVDVBT_761:
 		card->gpio_mode = (1 << 26) | (1 << 14) | (1 << 5);
 		card->op_sync_orin = 0;
diff --git a/drivers/media/dvb/cinergyT2/Kconfig b/drivers/media/dvb/cinergyT2/Kconfig
index 7cf4c4a888e..6018fcdba1e 100644
--- a/drivers/media/dvb/cinergyT2/Kconfig
+++ b/drivers/media/dvb/cinergyT2/Kconfig
@@ -21,35 +21,35 @@ config DVB_CINERGYT2_TUNING
 config DVB_CINERGYT2_STREAM_URB_COUNT
 	int "Number of queued USB Request Blocks for Highspeed Stream Transfers"
 	depends on DVB_CINERGYT2_TUNING
-        default "32"
+	default "32"
 	help
 	  USB Request Blocks for Highspeed Stream transfers are scheduled in
 	  a queue for the Host Controller.
 
 	  Usually the default value is a safe choice.
 
-	  You may increase this number if you are using this device in a 
-	  Server Environment with many high-traffic USB Highspeed devices 
+	  You may increase this number if you are using this device in a
+	  Server Environment with many high-traffic USB Highspeed devices
 	  sharing the same USB bus.
 
 
 config DVB_CINERGYT2_STREAM_BUF_SIZE
 	int "Size of URB Stream Buffers for Highspeed Transfers"
 	depends on DVB_CINERGYT2_TUNING
-        default "512"
+	default "512"
 	help
 	  Should be a multiple of native buffer size of 512 bytes.
 	  Default value is a safe choice.
 
-	  You may increase this number if you are using this device in a 
-	  Server Environment with many high-traffic USB Highspeed devices 
+	  You may increase this number if you are using this device in a
+	  Server Environment with many high-traffic USB Highspeed devices
 	  sharing the same USB bus.
 
 
 config DVB_CINERGYT2_QUERY_INTERVAL
 	int "Status update interval [milliseconds]"
 	depends on DVB_CINERGYT2_TUNING
-        default "250"
+	default "250"
 	help
 	  This is the interval for status readouts from the demodulator.
 	  You may try lower values if you need more responsive signal quality
@@ -64,9 +64,9 @@ config DVB_CINERGYT2_QUERY_INTERVAL
 config DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
 	bool "Register the onboard IR Remote Control Receiver as Input Device"
 	depends on DVB_CINERGYT2_TUNING
-        default "yes"
+	default "yes"
 	help
-	  Enable this option if you want to use the onboard Infrared Remote 
+	  Enable this option if you want to use the onboard Infrared Remote
 	  Control Receiver as Linux-Input device.
 
 	  Right now only the keycode table for the default Remote Control
@@ -77,7 +77,7 @@ config DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
 config DVB_CINERGYT2_RC_QUERY_INTERVAL
 	int "Infrared Remote Controller update interval [milliseconds]"
 	depends on DVB_CINERGYT2_TUNING && DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
-        default "50"
+	default "50"
 	help
 	  If you have a very fast-repeating remote control you can try lower
 	  values, for normal consumer receivers the default value should be
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index 1d69bf031fb..c4b4c5b6b7c 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -131,6 +131,8 @@ struct cinergyt2 {
 
 	wait_queue_head_t poll_wq;
 	int pending_fe_events;
+	int disconnect_pending;
+	atomic_t inuse;
 
 	void *streambuf;
 	dma_addr_t streambuf_dmahandle;
@@ -343,7 +345,7 @@ static int cinergyt2_start_feed(struct dvb_demux_feed *dvbdmxfeed)
 	struct dvb_demux *demux = dvbdmxfeed->demux;
 	struct cinergyt2 *cinergyt2 = demux->priv;
 
-	if (down_interruptible(&cinergyt2->sem))
+	if (cinergyt2->disconnect_pending || down_interruptible(&cinergyt2->sem))
 		return -ERESTARTSYS;
 
 	if (cinergyt2->streaming == 0)
@@ -359,7 +361,7 @@ static int cinergyt2_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
 	struct dvb_demux *demux = dvbdmxfeed->demux;
 	struct cinergyt2 *cinergyt2 = demux->priv;
 
-	if (down_interruptible(&cinergyt2->sem))
+	if (cinergyt2->disconnect_pending || down_interruptible(&cinergyt2->sem))
 		return -ERESTARTSYS;
 
 	if (--cinergyt2->streaming == 0)
@@ -479,23 +481,37 @@ static int cinergyt2_open (struct inode *inode, struct file *file)
 {
 	struct dvb_device *dvbdev = file->private_data;
 	struct cinergyt2 *cinergyt2 = dvbdev->priv;
-	int err;
+	int err = -ERESTARTSYS;
 
-	if ((err = dvb_generic_open(inode, file)))
+	if (cinergyt2->disconnect_pending || down_interruptible(&cinergyt2->sem))
+		return -ERESTARTSYS;
+
+	if ((err = dvb_generic_open(inode, file))) {
+		up(&cinergyt2->sem);
 		return err;
+	}
 
-	if (down_interruptible(&cinergyt2->sem))
-		return -ERESTARTSYS;
 
 	if ((file->f_flags & O_ACCMODE) != O_RDONLY) {
 		cinergyt2_sleep(cinergyt2, 0);
 		schedule_delayed_work(&cinergyt2->query_work, HZ/2);
 	}
 
+	atomic_inc(&cinergyt2->inuse);
+
 	up(&cinergyt2->sem);
 	return 0;
 }
 
+static void cinergyt2_unregister(struct cinergyt2 *cinergyt2)
+{
+	dvb_unregister_device(cinergyt2->fedev);
+	dvb_unregister_adapter(&cinergyt2->adapter);
+
+	cinergyt2_free_stream_urbs(cinergyt2);
+	kfree(cinergyt2);
+}
+
 static int cinergyt2_release (struct inode *inode, struct file *file)
 {
 	struct dvb_device *dvbdev = file->private_data;
@@ -504,7 +520,7 @@ static int cinergyt2_release (struct inode *inode, struct file *file)
 	if (down_interruptible(&cinergyt2->sem))
 		return -ERESTARTSYS;
 
-	if ((file->f_flags & O_ACCMODE) != O_RDONLY) {
+	if (!cinergyt2->disconnect_pending && (file->f_flags & O_ACCMODE) != O_RDONLY) {
 		cancel_delayed_work(&cinergyt2->query_work);
 		flush_scheduled_work();
 		cinergyt2_sleep(cinergyt2, 1);
@@ -512,6 +528,11 @@ static int cinergyt2_release (struct inode *inode, struct file *file)
 
 	up(&cinergyt2->sem);
 
+	if (atomic_dec_and_test(&