[media] dvb-usb: move it to drivers/media/usb/dvb-usb

As media/dvb will be removed, move it to a proper place.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 4813 deletions

diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
deleted file mode 100644
index 510001da6e8..00000000000
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ /dev/null
@@ -1,4813 +0,0 @@
-/* Linux driver for devices based on the DiBcom DiB0700 USB bridge
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- *  Copyright (C) 2005-9 DiBcom, SA et al
- */
-#include "dib0700.h"
-
-#include "dib3000mc.h"
-#include "dib7000m.h"
-#include "dib7000p.h"
-#include "dib8000.h"
-#include "dib9000.h"
-#include "mt2060.h"
-#include "mt2266.h"
-#include "tuner-xc2028.h"
-#include "xc5000.h"
-#include "xc4000.h"
-#include "s5h1411.h"
-#include "dib0070.h"
-#include "dib0090.h"
-#include "lgdt3305.h"
-#include "mxl5007t.h"
-
-static int force_lna_activation;
-module_param(force_lna_activation, int, 0644);
-MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), "
-		"if applicable for the device (default: 0=automatic/off).");
-
-struct dib0700_adapter_state {
-	int (*set_param_save) (struct dvb_frontend *);
-	const struct firmware *frontend_firmware;
-};
-
-/* Hauppauge Nova-T 500 (aka Bristol)
- *  has a LNA on GPIO0 which is enabled by setting 1 */
-static struct mt2060_config bristol_mt2060_config[2] = {
-	{
-		.i2c_address = 0x60,
-		.clock_out   = 3,
-	}, {
-		.i2c_address = 0x61,
-	}
-};
-
-
-static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
-	.band_caps = BAND_VHF | BAND_UHF,
-	.setup     = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
-
-	.agc1_max = 42598,
-	.agc1_min = 17694,
-	.agc2_max = 45875,
-	.agc2_min = 0,
-
-	.agc1_pt1 = 0,
-	.agc1_pt2 = 59,
-
-	.agc1_slope1 = 0,
-	.agc1_slope2 = 69,
-
-	.agc2_pt1 = 0,
-	.agc2_pt2 = 59,
-
-	.agc2_slope1 = 111,
-	.agc2_slope2 = 28,
-};
-
-static struct dib3000mc_config bristol_dib3000mc_config[2] = {
-	{	.agc          = &bristol_dib3000p_mt2060_agc_config,
-		.max_time     = 0x196,
-		.ln_adc_level = 0x1cc7,
-		.output_mpeg2_in_188_bytes = 1,
-	},
-	{	.agc          = &bristol_dib3000p_mt2060_agc_config,
-		.max_time     = 0x196,
-		.ln_adc_level = 0x1cc7,
-		.output_mpeg2_in_188_bytes = 1,
-	}
-};
-
-static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_state *st = adap->dev->priv;
-	if (adap->id == 0) {
-		dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0); msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1); msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
-
-		if (force_lna_activation)
-			dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-		else
-			dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
-
-		if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
-			dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
-			return -ENODEV;
-		}
-	}
-	st->mt2060_if1[adap->id] = 1220;
-	return (adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
-		(10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
-}
-
-static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval)
-{
-	struct i2c_msg msg[2] = {
-		{ .addr = 0x50, .flags = 0,        .buf = &adrs, .len = 1 },
-		{ .addr = 0x50, .flags = I2C_M_RD, .buf = pval,  .len = 1 },
-	};
-	if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO;
-	return 0;
-}
-
-static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
-	struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1);
-	s8 a;
-	int if1=1220;
-	if (adap->dev->udev->descriptor.idVendor  == cpu_to_le16(USB_VID_HAUPPAUGE) &&
-		adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
-		if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
-	}
-	return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c,
-			  &bristol_mt2060_config[adap->id], if1) == NULL ?
-			  -ENODEV : 0;
-}
-
-/* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */
-
-/* MT226x */
-static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = {
-	{
-		BAND_UHF,
-
-		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
-		* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
-		(0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
-	    | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
-
-		1130,
-		21,
-
-		0,
-		118,
-
-		0,
-		3530,
-		1,
-		0,
-
-		65535,
-		33770,
-		65535,
-		23592,
-
-		0,
-		62,
-		255,
-		64,
-		64,
-		132,
-		192,
-		80,
-		80,
-
-		17,
-		27,
-		23,
-		51,
-
-		1,
-	}, {
-		BAND_VHF | BAND_LBAND,
-
-		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
-		* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
-		(0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
-	    | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
-
-		2372,
-		21,
-
-		0,
-		118,
-
-		0,
-		3530,
-		1,
-		0,
-
-		65535,
-		0,
-		65535,
-		23592,
-
-		0,
-		128,
-		128,
-		128,
-		0,
-		128,
-		253,
-		81,
-		0,
-
-		17,
-		27,
-		23,
-		51,
-
-		1,
-	}
-};
-
-static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = {
-	60000, 30000,
-	1, 8, 3, 1, 0,
-	0, 0, 1, 1, 2,
-	(3 << 14) | (1 << 12) | (524 << 0),
-	0,
-	20452225,
-};
-
-static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = {
-	{	.output_mpeg2_in_188_bytes = 1,
-		.hostbus_diversity = 1,
-		.tuner_is_baseband = 1,
-
-		.agc_config_count = 2,
-		.agc = stk7700d_7000p_mt2266_agc_config,
-		.bw  = &stk7700d_mt2266_pll_config,
-
-		.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-		.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
-		.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
-	},
-	{	.output_mpeg2_in_188_bytes = 1,
-		.hostbus_diversity = 1,
-		.tuner_is_baseband = 1,
-
-		.agc_config_count = 2,
-		.agc = stk7700d_7000p_mt2266_agc_config,
-		.bw  = &stk7700d_mt2266_pll_config,
-
-		.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-		.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
-		.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
-	}
-};
-
-static struct mt2266_config stk7700d_mt2266_config[2] = {
-	{	.i2c_address = 0x60
-	},
-	{	.i2c_address = 0x60
-	}
-};
-
-static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	if (adap->id == 0) {
-		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-		msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-		dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-		dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-		msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-		msleep(10);
-		if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
-					     stk7700d_dib7000p_mt2266_config)
-		    != 0) {
-			err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n", __func__);
-			return -ENODEV;
-		}
-	}
-
-	adap->fe_adap[0].fe =
-		dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,
-			   0x80 + (adap->id << 1),
-			   &stk7700d_dib7000p_mt2266_config[adap->id]);
-
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	if (adap->id == 0) {
-		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-		msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-		dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-		dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-		msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-		msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-		if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
-					     stk7700d_dib7000p_mt2266_config)
-		    != 0) {
-			err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n", __func__);
-			return -ENODEV;
-		}
-	}
-
-	adap->fe_adap[0].fe =
-		dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,
-			   0x80 + (adap->id << 1),
-			   &stk7700d_dib7000p_mt2266_config[adap->id]);
-
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct i2c_adapter *tun_i2c;
-	tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
-	return dvb_attach(mt2266_attach, adap->fe_adap[0].fe, tun_i2c,
-		&stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;
-}
-
-/* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */
-static struct dibx000_agc_config xc3028_agc_config = {
-	BAND_VHF | BAND_UHF,       /* band_caps */
-
-	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
-	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
-	 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
-	(0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
-	(3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
-
-	712,	/* inv_gain */
-	21,	/* time_stabiliz */
-
-	0,	/* alpha_level */
-	118,	/* thlock */
-
-	0,	/* wbd_inv */
-	2867,	/* wbd_ref */
-	0,	/* wbd_sel */
-	2,	/* wbd_alpha */
-
-	0,	/* agc1_max */
-	0,	/* agc1_min */
-	39718,	/* agc2_max */
-	9930,	/* agc2_min */
-	0,	/* agc1_pt1 */
-	0,	/* agc1_pt2 */
-	0,	/* agc1_pt3 */
-	0,	/* agc1_slope1 */
-	0,	/* agc1_slope2 */
-	0,	/* agc2_pt1 */
-	128,	/* agc2_pt2 */
-	29,	/* agc2_slope1 */
-	29,	/* agc2_slope2 */
-
-	17,	/* alpha_mant */
-	27,	/* alpha_exp */
-	23,	/* beta_mant */
-	51,	/* beta_exp */
-
-	1,	/* perform_agc_softsplit */
-};
-
-/* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */
-static struct dibx000_bandwidth_config xc3028_bw_config = {
-	60000, 30000, /* internal, sampling */
-	1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */
-	0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc,
-			  modulo */
-	(3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
-	(1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
-	20452225, /* timf */
-	30000000, /* xtal_hz */
-};
-
-static struct dib7000p_config stk7700ph_dib7700_xc3028_config = {
-	.output_mpeg2_in_188_bytes = 1,
-	.tuner_is_baseband = 1,
-
-	.agc_config_count = 1,
-	.agc = &xc3028_agc_config,
-	.bw  = &xc3028_bw_config,
-
-	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
-};
-
-static int stk7700ph_xc3028_callback(void *ptr, int component,
-				     int command, int arg)
-{
-	struct dvb_usb_adapter *adap = ptr;
-
-	switch (command) {
-	case XC2028_TUNER_RESET:
-		/* Send the tuner in then out of reset */
-		dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 0); msleep(10);
-		dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
-		break;
-	case XC2028_RESET_CLK:
-		break;
-	default:
-		err("%s: unknown command %d, arg %d\n", __func__,
-			command, arg);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static struct xc2028_ctrl stk7700ph_xc3028_ctrl = {
-	.fname = XC2028_DEFAULT_FIRMWARE,
-	.max_len = 64,
-	.demod = XC3028_FE_DIBCOM52,
-};
-
-static struct xc2028_config stk7700ph_xc3028_config = {
-	.i2c_addr = 0x61,
-	.ctrl = &stk7700ph_xc3028_ctrl,
-};
-
-static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
-
-	if (desc->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
-	    desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
-	else
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-	msleep(10);
-
-	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
-				     &stk7700ph_dib7700_xc3028_config) != 0) {
-		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
-		    __func__);
-		return -ENODEV;
-	}
-
-	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
-		&stk7700ph_dib7700_xc3028_config);
-
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct i2c_adapter *tun_i2c;
-
-	tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe,
-		DIBX000_I2C_INTERFACE_TUNER, 1);
-
-	stk7700ph_xc3028_config.i2c_adap = tun_i2c;
-
-	/* FIXME: generalize & move to common area */
-	adap->fe_adap[0].fe->callback = stk7700ph_xc3028_callback;
-
-	return dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &stk7700ph_xc3028_config)
-		== NULL ? -ENODEV : 0;
-}
-
-#define DEFAULT_RC_INTERVAL 50
-
-static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
-
-/* Number of keypresses to ignore before start repeating */
-#define RC_REPEAT_DELAY 6
-
-/*
- * This function is used only when firmware is < 1.20 version. Newer
- * firmwares use bulk mode, with functions implemented at dib0700_core,
- * at dib0700_rc_urb_completion()
- */
-static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
-{
-	u8 key[4];
-	u32 keycode;
-	u8 toggle;
-	int i;
-	struct dib0700_state *st = d->priv;
-
-	if (st->fw_version >= 0x10200) {
-		/* For 1.20 firmware , We need to keep the RC polling
-		   callback so we can reuse the input device setup in
-		   dvb-usb-remote.c.  However, the actual work is being done
-		   in the bulk URB completion handler. */
-		return 0;
-	}
-
-	i = dib0700_ctrl_rd(d, rc_request, 2, key, 4);
-	if (i <= 0) {
-		err("RC Query Failed");
-		return -1;
-	}
-
-	/* losing half of KEY_0 events from Philipps rc5 remotes.. */
-	if (key[0] == 0 && key[1] == 0 && key[2] == 0 && key[3] == 0)
-		return 0;
-
-	/* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]);  */
-
-	dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */
-
-	d->last_event = 0;
-	switch (d->props.rc.core.protocol) {
-	case RC_TYPE_NEC:
-		/* NEC protocol sends repeat code as 0 0 0 FF */
-		if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
-		    (key[3] == 0xff))
-			keycode = d->last_event;
-		else {
-			keycode = key[3-2] << 8 | key[3-3];
-			d->last_event = keycode;
-		}
-
-		rc_keydown(d->rc_dev, keycode, 0);
-		break;
-	default:
-		/* RC-5 protocol changes toggle bit on new keypress */
-		keycode = key[3-2] << 8 | key[3-3];
-		toggle = key[3-1];
-		rc_keydown(d->rc_dev, keycode, toggle);
-
-		break;
-	}
-	return 0;
-}
-
-/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
-static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
-	BAND_UHF | BAND_VHF,
-
-	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
-	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
-	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
-	| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
-
-	712,
-	41,
-
-	0,
-	118,
-
-	0,
-	4095,
-	0,
-	0,
-
-	42598,
-	17694,
-	45875,
-	2621,
-	0,
-	76,
-	139,
-	52,
-	59,
-	107,
-	172,
-	57,
-	70,
-
-	21,
-	25,
-	28,
-	48,
-
-	1,
-	{  0,
-	   107,
-	   51800,
-	   24700
-	},
-};
-
-static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
-	BAND_UHF | BAND_VHF,
-
-	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
-	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
-	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
-	| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
-
-	712,
-	41,
-
-	0,
-	118,
-
-	0,
-	4095,
-	0,
-	0,
-
-	42598,
-	16384,
-	42598,
-	    0,
-
-	  0,
-	137,
-	255,
-
-	  0,
-	255,
-
-	0,
-	0,
-
-	 0,
-	41,
-
-	15,
-	25,
-
-	28,
-	48,
-
-	0,
-};
-
-static struct dibx000_bandwidth_config stk7700p_pll_config = {
-	60000, 30000,
-	1, 8, 3, 1, 0,
-	0, 0, 1, 1, 0,
-	(3 << 14) | (1 << 12) | (524 << 0),
-	60258167,
-	20452225,
-	30000000,
-};
-
-static struct dib7000m_config stk7700p_dib7000m_config = {
-	.dvbt_mode = 1,
-	.output_mpeg2_in_188_bytes = 1,
-	.quartz_direct = 1,
-
-	.agc_config_count = 1,
-	.agc = &stk7700p_7000m_mt2060_agc_config,
-	.bw  = &stk7700p_pll_config,
-
-	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
-};
-
-static struct dib7000p_config stk7700p_dib7000p_config = {
-	.output_mpeg2_in_188_bytes = 1,
-
-	.agc_config_count = 1,
-	.agc = &stk7700p_7000p_mt2060_agc_config,
-	.bw  = &stk7700p_pll_config,
-
-	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
-};
-
-static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_state *st = adap->dev->priv;
-	/* unless there is no real power management in DVB - we leave the device on GPIO6 */
-
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0); msleep(50);
-
-	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1); msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO9,  GPIO_OUT, 1);
-
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
-	dib0700_ctrl_clock(adap->dev, 72, 1);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
-
-	dib0700_set_gpio(adap->dev,  GPIO0, GPIO_OUT, 1);
-
-	st->mt2060_if1[0] = 1220;
-
-	if (dib7000pc_detection(&adap->dev->i2c_adap)) {
-		adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
-		st->is_dib7000pc = 1;
-	} else
-		adap->fe_adap[0].fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
-
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-static struct mt2060_config stk7700p_mt2060_config = {
-	0x60
-};
-
-static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
-	struct dib0700_state *st = adap->dev->priv;
-	struct i2c_adapter *tun_i2c;
-	s8 a;
-	int if1=1220;
-	if (adap->dev->udev->descriptor.idVendor  == cpu_to_le16(USB_VID_HAUPPAUGE) &&
-		adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
-		if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
-	}
-	if (st->is_dib7000pc)
-		tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
-	else
-		tun_i2c = dib7000m_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
-
-	return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk7700p_mt2060_config,
-		if1) == NULL ? -ENODEV : 0;
-}
-
-/* DIB7070 generic */
-static struct dibx000_agc_config dib7070_agc_config = {
-	BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
-	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
-	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
-	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
-	| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
-
-	600,
-	10,
-
-	0,
-	118,
-
-	0,
-	3530,
-	1,
-	5,
-
-	65535,
-		0,
-
-	65535,
-	0,
-
-	0,
-	40,
-	183,
-	206,
-	255,
-	72,
-	152,
-	88,
-	90,
-
-	17,
-	27,
-	23,
-	51,
-
-	0,
-};
-
-static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
-{
-	deb_info("reset: %d", onoff);
-	return dib7000p_set_gpio(fe, 8, 0, !onoff);
-}
-
-static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
-{
-	deb_info("sleep: %d", onoff);
-	return dib7000p_set_gpio(fe, 9, 0, onoff);
-}
-
-static struct dib0070_config dib7070p_dib0070_config[2] = {
-	{
-		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
-		.reset = dib7070_tuner_reset,
-		.sleep = dib7070_tuner_sleep,
-		.clock_khz = 12000,
-		.clock_pad_drive = 4,
-		.charge_pump = 2,
-	}, {
-		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
-		.reset = dib7070_tuner_reset,
-		.sleep = dib7070_tuner_sleep,
-		.clock_khz = 12000,
-		.charge_pump = 2,
-	}
-};
-
-static struct dib0070_config dib7770p_dib0070_config = {
-	 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
-	 .reset = dib7070_tuner_reset,
-	 .sleep = dib7070_tuner_sleep,
-	 .clock_khz = 12000,
-	 .clock_pad_drive = 0,
-	 .flip_chip = 1,
-	 .charge_pump = 2,
-};
-
-static int dib7070_set_param_override(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct dib0700_adapter_state *state = adap->priv;
-
-	u16 offset;
-	u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
-	switch (band) {
-		case BAND_VHF: offset = 950; break;
-		case BAND_UHF:
-		default: offset = 550; break;
-	}
-	deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
-	dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
-	return state->set_param_save(fe);
-}
-
-static int dib7770_set_param_override(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct dib0700_adapter_state *state = adap->priv;
-
-	 u16 offset;
-	 u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
-	 switch (band) {
-	 case BAND_VHF:
-		  dib7000p_set_gpio(fe, 0, 0, 1);
-		  offset = 850;
-		  break;
-	 case BAND_UHF:
-	 default:
-		  dib7000p_set_gpio(fe, 0, 0, 0);
-		  offset = 250;
-		  break;
-	 }
-	 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
-	 dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
-	 return state->set_param_save(fe);
-}
-
-static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	 struct dib0700_adapter_state *st = adap->priv;
-	 struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe,
-			 DIBX000_I2C_INTERFACE_TUNER, 1);
-
-	 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
-			&dib7770p_dib0070_config) == NULL)
-		 return -ENODEV;
-
-	 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
-	 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7770_set_param_override;
-	 return 0;
-}
-
-static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_adapter_state *st = adap->priv;
-	struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
-
-	if (adap->id == 0) {
-		if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
-			return -ENODEV;
-	} else {
-		if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
-			return -ENODEV;
-	}
-
-	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
-	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override;
-	return 0;
-}
-
-static int stk7700p_pid_filter(struct dvb_usb_adapter *adapter, int index,
-		u16 pid, int onoff)
-{
-	struct dib0700_state *st = adapter->dev->priv;
-	if (st->is_dib7000pc)
-		return dib7000p_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
-	return dib7000m_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
-}
-
-static int stk7700p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
-{
-	struct dib0700_state *st = adapter->dev->priv;
-	if (st->is_dib7000pc)
-		return dib7000p_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
-	return dib7000m_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
-}
-
-static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
-{
-	return dib7000p_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
-}
-
-static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
-{
-	return dib7000p_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
-}
-
-static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
-	60000, 15000,
-	1, 20, 3, 1, 0,
-	0, 0, 1, 1, 2,
-	(3 << 14) | (1 << 12) | (524 << 0),
-	(0 << 25) | 0,
-	20452225,
-	12000000,
-};
-
-static struct dib7000p_config dib7070p_dib7000p_config = {
-	.output_mpeg2_in_188_bytes = 1,
-
-	.agc_config_count = 1,
-	.agc = &dib7070_agc_config,
-	.bw  = &dib7070_bw_config_12_mhz,
-	.tuner_is_baseband = 1,
-	.spur_protect = 1,
-
-	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
-
-	.hostbus_diversity = 1,
-};
-
-/* STK7070P */
-static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
-	if (p->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
-	    p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
-		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
-	else
-		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-
-	dib0700_ctrl_clock(adap->dev, 72, 1);
-
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-
-	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
-				     &dib7070p_dib7000p_config) != 0) {
-		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
-		    __func__);
-		return -ENODEV;
-	}
-
-	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
-		&dib7070p_dib7000p_config);
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-/* STK7770P */
-static struct dib7000p_config dib7770p_dib7000p_config = {
-	.output_mpeg2_in_188_bytes = 1,
-
-	.agc_config_count = 1,
-	.agc = &dib7070_agc_config,
-	.bw  = &dib7070_bw_config_12_mhz,
-	.tuner_is_baseband = 1,
-	.spur_protect = 1,
-
-	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
-
-	.hostbus_diversity = 1,
-	.enable_current_mirror = 1,
-	.disable_sample_and_hold = 0,
-};
-
-static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
-	if (p->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
-	    p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
-		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
-	else
-		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-
-	dib0700_ctrl_clock(adap->dev, 72, 1);
-
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-
-	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
-				     &dib7770p_dib7000p_config) != 0) {
-		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
-		    __func__);
-		return -ENODEV;
-	}
-
-	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
-		&dib7770p_dib7000p_config);
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-/* DIB807x generic */
-static struct dibx000_agc_config dib807x_agc_config[2] = {
-	{
-		BAND_VHF,
-		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
-		 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
-		 * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0,
-		 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
-		 * P_agc_write=0 */
-		(0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) |
-			(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
-			(0 << 0), /* setup*/
-
-		600, /* inv_gain*/
-		10,  /* time_stabiliz*/
-
-		0,  /* alpha_level*/
-		118,  /* thlock*/
-
-		0,     /* wbd_inv*/
-		3530,  /* wbd_ref*/
-		1,     /* wbd_sel*/
-		5,     /* wbd_alpha*/
-
-		65535,  /* agc1_max*/
-		0,  /* agc1_min*/
-
-		65535,  /* agc2_max*/
-		0,      /* agc2_min*/
-
-		0,      /* agc1_pt1*/
-		40,     /* agc1_pt2*/
-		183,    /* agc1_pt3*/
-		206,    /* agc1_slope1*/
-		255,    /* agc1_slope2*/
-		72,     /* agc2_pt1*/
-		152,    /* agc2_pt2*/
-		88,     /* agc2_slope1*/
-		90,     /* agc2_slope2*/
-
-		17,  /* alpha_mant*/
-		27,  /* alpha_exp*/
-		23,  /* beta_mant*/
-		51,  /* beta_exp*/
-
-		0,  /* perform_agc_softsplit*/
-	}, {
-		BAND_UHF,
-		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
-		 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
-		 * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
-		 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
-		 * P_agc_write=0 */
-		(0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) |
-			(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
-			(0 << 0), /* setup */
-
-		600, /* inv_gain*/
-		10,  /* time_stabiliz*/
-
-		0,  /* alpha_level*/
-		118,  /* thlock*/
-
-		0,     /* wbd_inv*/
-		3530,  /* wbd_ref*/
-		1,     /* wbd_sel*/
-		5,     /* wbd_alpha*/
-
-		65535,  /* agc1_max*/
-		0,  /* agc1_min*/
-
-		65535,  /* agc2_max*/
-		0,      /* agc2_min*/
-
-		0,      /* agc1_pt1*/
-		40,     /* agc1_pt2*/
-		183,    /* agc1_pt3*/
-		206,    /* agc1_slope1*/
-		255,    /* agc1_slope2*/
-		72,     /* agc2_pt1*/
-		152,    /* agc2_pt2*/
-		88,     /* agc2_slope1*/
-		90,     /* agc2_slope2*/
-
-		17,  /* alpha_mant*/
-		27,  /* alpha_exp*/
-		23,  /* beta_mant*/
-		51,  /* beta_exp*/
-
-		0,  /* perform_agc_softsplit*/
-	}
-};
-
-static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = {
-	60000, 15000, /* internal, sampling*/
-	1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/
-	0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core,
-			  ADClkSrc, modulo */
-	(3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/
-	(0 << 25) | 0, /* ifreq = 0.000000 MHz*/
-	18179755, /* timf*/
-	12000000, /* xtal_hz*/
-};
-
-static struct dib8000_config dib807x_dib8000_config[2] = {
-	{
-		.output_mpeg2_in_188_bytes = 1,
-
-		.agc_config_count = 2,
-		.agc = dib807x_agc_config,
-		.pll = &dib807x_bw_config_12_mhz,
-		.tuner_is_baseband = 1,
-
-		.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
-		.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
-		.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
-
-		.hostbus_diversity = 1,
-		.div_cfg = 1,
-		.agc_control = &dib0070_ctrl_agc_filter,
-		.output_mode = OUTMODE_MPEG2_FIFO,
-		.drives = 0x2d98,
-	}, {
-		.output_mpeg2_in_188_bytes = 1,
-
-		.agc_config_count = 2,
-		.agc = dib807x_agc_config,
-		.pll = &dib807x_bw_config_12_mhz,
-		.tuner_is_baseband = 1,
-
-		.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
-		.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
-		.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
-