md/raid10: prepare data structures for handling replacement.

Allow each slot in the RAID10 to have 2 devices, the want_replacement
and the replacement.

Also an r10bio to have 2 bios, and for resync/recovery allocate the
second bio if there are any replacement devices.

Signed-off-by: NeilBrown <neilb@suse.de>

1 files changed, 37 insertions, 24 deletions

diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h
index 7facfdf841f..7c615613c38 100644
--- a/drivers/md/raid10.h
+++ b/drivers/md/raid10.h
@@ -2,7 +2,7 @@
 #define _RAID10_H
 
 struct mirror_info {
-	struct md_rdev	*rdev;
+	struct md_rdev	*rdev, *replacement;
 	sector_t	head_position;
 	int		recovery_disabled;	/* matches
 						 * mddev->recovery_disabled
@@ -18,12 +18,13 @@ struct r10conf {
 	spinlock_t		device_lock;
 
 	/* geometry */
-	int			near_copies;  /* number of copies laid out raid0 style */
+	int			near_copies;  /* number of copies laid out
+					       * raid0 style */
 	int 			far_copies;   /* number of copies laid out
 					       * at large strides across drives
 					       */
-	int			far_offset;   /* far_copies are offset by 1 stripe
-					       * instead of many
+	int			far_offset;   /* far_copies are offset by 1
+					       * stripe instead of many
 					       */
 	int			copies;	      /* near_copies * far_copies.
 					       * must be <= raid_disks
@@ -34,10 +35,11 @@ struct r10conf {
 					       * 1 stripe.
 					       */
 
-	sector_t		dev_sectors;  /* temp copy of mddev->dev_sectors */
+	sector_t		dev_sectors;  /* temp copy of
+					       * mddev->dev_sectors */
 
-	int chunk_shift; /* shift from chunks to sectors */
-	sector_t chunk_mask;
+	int			chunk_shift; /* shift from chunks to sectors */
+	sector_t		chunk_mask;
 
 	struct list_head	retry_list;
 	/* queue pending writes and submit them on unplug */
@@ -45,20 +47,22 @@ struct r10conf {
 	int			pending_count;
 
 	spinlock_t		resync_lock;
-	int nr_pending;
-	int nr_waiting;
-	int nr_queued;
-	int barrier;
+	int			nr_pending;
+	int			nr_waiting;
+	int			nr_queued;
+	int			barrier;
 	sector_t		next_resync;
 	int			fullsync;  /* set to 1 if a full sync is needed,
 					    * (fresh device added).
 					    * Cleared when a sync completes.
 					    */
-
+	int			have_replacement; /* There is at least one
+						   * replacement device.
+						   */
 	wait_queue_head_t	wait_barrier;
 
-	mempool_t *r10bio_pool;
-	mempool_t *r10buf_pool;
+	mempool_t		*r10bio_pool;
+	mempool_t		*r10buf_pool;
 	struct page		*tmppage;
 
 	/* When taking over an array from a different personality, we store
@@ -98,11 +102,18 @@ struct r10bio {
 	 * When resyncing we also use one for each copy.
 	 * When reconstructing, we use 2 bios, one for read, one for write.
 	 * We choose the number when they are allocated.
+	 * We sometimes need an extra bio to write to the replacement.
 	 */
 	struct {
-		struct bio		*bio;
-		sector_t addr;
-		int devnum;
+		struct bio	*bio;
+		union {
+			struct bio	*repl_bio; /* used for resync and
+						    * writes */
+			struct md_rdev	*rdev;	   /* used for reads
+						    * (read_slot >= 0) */
+		};
+		sector_t	addr;
+		int		devnum;
 	} devs[0];
 };
 
@@ -121,17 +132,19 @@ struct r10bio {
 #define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
 
 /* bits for r10bio.state */
-#define	R10BIO_Uptodate	0
-#define	R10BIO_IsSync	1
-#define	R10BIO_IsRecover 2
-#define	R10BIO_Degraded 3
+enum r10bio_state {
+	R10BIO_Uptodate,
+	R10BIO_IsSync,
+	R10BIO_IsRecover,
+	R10BIO_Degraded,
 /* Set ReadError on bios that experience a read error
  * so that raid10d knows what to do with them.
  */
-#define	R10BIO_ReadError 4
+	R10BIO_ReadError,
 /* If a write for this request means we can clear some
  * known-bad-block records, we set this flag.
  */
-#define	R10BIO_MadeGood 5
-#define	R10BIO_WriteError 6
+	R10BIO_MadeGood,
+	R10BIO_WriteError,
+};
 #endif