md/raid1: delay reads that could overtake behind-writes.

When a raid1 array is configured to support write-behind
on some devices, it normally only reads from other devices.
If all devices are write-behind (because the rest have failed)
it is possible for a read request to be serviced before a
behind-write request, which would appear as data corruption.

So when forced to read from a WriteMostly device, wait for any
write-behind to complete, and don't start any more behind-writes.

Signed-off-by: NeilBrown <neilb@suse.de>

1 files changed, 18 insertions, 7 deletions

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 2e08e48b02d..cb2da87ad59 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -857,6 +857,15 @@ static int make_request(mddev_t *mddev, struct bio * bio)
 		}
 		mirror = conf->mirrors + rdisk;
 
+		if (test_bit(WriteMostly, &mirror->rdev->flags) &&
+		    bitmap) {
+			/* Reading from a write-mostly device must
+			 * take care not to over-take any writes
+			 * that are 'behind'
+			 */
+			wait_event(bitmap->behind_wait,
+				   atomic_read(&bitmap->behind_writes) == 0);
+		}
 		r1_bio->read_disk = rdisk;
 
 		read_bio = bio_clone(bio, GFP_NOIO);
@@ -934,10 +943,14 @@ static int make_request(mddev_t *mddev, struct bio * bio)
 		set_bit(R1BIO_Degraded, &r1_bio->state);
 	}
 
-	/* do behind I/O ? */
+	/* do behind I/O ?
+	 * Not if there are too many, or cannot allocate memory,
+	 * or a reader on WriteMostly is waiting for behind writes 
+	 * to flush */
 	if (bitmap &&
 	    (atomic_read(&bitmap->behind_writes)
 	     < mddev->bitmap_info.max_write_behind) &&
+	    !waitqueue_active(&bitmap->behind_wait) &&
 	    (behind_pages = alloc_behind_pages(bio)) != NULL)
 		set_bit(R1BIO_BehindIO, &r1_bio->state);
 
@@ -2144,15 +2157,13 @@ static int stop(mddev_t *mddev)
 {
 	conf_t *conf = mddev->private;
 	struct bitmap *bitmap = mddev->bitmap;
-	int behind_wait = 0;
 
 	/* wait for behind writes to complete */
-	while (bitmap && atomic_read(&bitmap->behind_writes) > 0) {
-		behind_wait++;
-		printk(KERN_INFO "raid1: behind writes in progress on device %s, waiting to stop (%d)\n", mdname(mddev), behind_wait);
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(HZ); /* wait a second */
+	if (bitmap && atomic_read(&bitmap->behind_writes) > 0) {
+		printk(KERN_INFO "raid1: behind writes in progress on device %s, waiting to stop.\n", mdname(mddev));
 		/* need to kick something here to make sure I/O goes? */
+		wait_event(bitmap->behind_wait,
+			   atomic_read(&bitmap->behind_writes) == 0);
 	}
 
 	raise_barrier(conf);