aboutsummaryrefslogtreecommitdiff
path: root/drivers/isdn/i4l/isdn_tty.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-03-20 21:04:47 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-03-20 21:04:47 -0700
commit3b59bf081622b6446db77ad06c93fe23677bc533 (patch)
tree3f4bb5a27c90cc86994a1f6d3c53fbf9208003cb /drivers/isdn/i4l/isdn_tty.c
parente45836fafe157df137a837093037f741ad8f4c90 (diff)
parentbbdb32cb5b73597386913d052165423b9d736145 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking merge from David Miller: "1) Move ixgbe driver over to purely page based buffering on receive. From Alexander Duyck. 2) Add receive packet steering support to e1000e, from Bruce Allan. 3) Convert TCP MD5 support over to RCU, from Eric Dumazet. 4) Reduce cpu usage in handling out-of-order TCP packets on modern systems, also from Eric Dumazet. 5) Support the IP{,V6}_UNICAST_IF socket options, making the wine folks happy, from Erich Hoover. 6) Support VLAN trunking from guests in hyperv driver, from Haiyang Zhang. 7) Support byte-queue-limtis in r8169, from Igor Maravic. 8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but was never properly implemented, Jiri Benc fixed that. 9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang. 10) Support kernel side dump filtering by ctmark in netfilter ctnetlink, from Pablo Neira Ayuso. 11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker. 12) Add new peek socket options to assist with socket migration, from Pavel Emelyanov. 13) Add sch_plug packet scheduler whose queue is controlled by userland daemons using explicit freeze and release commands. From Shriram Rajagopalan. 14) Fix FCOE checksum offload handling on transmit, from Yi Zou." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits) Fix pppol2tp getsockname() Remove printk from rds_sendmsg ipv6: fix incorrent ipv6 ipsec packet fragment cpsw: Hook up default ndo_change_mtu. net: qmi_wwan: fix build error due to cdc-wdm dependecy netdev: driver: ethernet: Add TI CPSW driver netdev: driver: ethernet: add cpsw address lookup engine support phy: add am79c874 PHY support mlx4_core: fix race on comm channel bonding: send igmp report for its master fs_enet: Add MPC5125 FEC support and PHY interface selection net: bpf_jit: fix BPF_S_LDX_B_MSH compilation net: update the usage of CHECKSUM_UNNECESSARY fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso ixgbe: Fix issues with SR-IOV loopback when flow control is disabled net/hyperv: Fix the code handling tx busy ixgbe: fix namespace issues when FCoE/DCB is not enabled rtlwifi: Remove unused ETH_ADDR_LEN defines igbvf: Use ETH_ALEN ... Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
Diffstat (limited to 'drivers/isdn/i4l/isdn_tty.c')
-rw-r--r--drivers/isdn/i4l/isdn_tty.c2440
1 files changed, 1220 insertions, 1220 deletions
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index ac4840124bc..3831abdbc66 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -61,7 +61,7 @@ char *isdn_tty_revision = "$Revision: 1.1.2.3 $";
* isdn_tty_readmodem().
*/
static int
-isdn_tty_try_read(modem_info * info, struct sk_buff *skb)
+isdn_tty_try_read(modem_info *info, struct sk_buff *skb)
{
int c;
int len;
@@ -93,7 +93,7 @@ isdn_tty_try_read(modem_info * info, struct sk_buff *skb)
last = *dp;
} else {
#endif
- if(len > 1)
+ if (len > 1)
tty_insert_flip_string(tty, skb->data, len - 1);
last = skb->data[len - 1];
#ifdef CONFIG_ISDN_AUDIO
@@ -179,7 +179,7 @@ isdn_tty_rcv_skb(int i, int di, int channel, struct sk_buff *skb)
info = &dev->mdm.info[midx];
#ifdef CONFIG_ISDN_AUDIO
ifmt = 1;
-
+
if ((info->vonline) && (!info->emu.vpar[4]))
isdn_audio_calc_dtmf(info, skb->data, skb->len, ifmt);
if ((info->vonline & 1) && (info->emu.vpar[1]))
@@ -213,29 +213,29 @@ isdn_tty_rcv_skb(int i, int di, int channel, struct sk_buff *skb)
if (info->vonline & 1) {
/* voice conversion/compression */
switch (info->emu.vpar[3]) {
- case 2:
- case 3:
- case 4:
- /* adpcm
- * Since compressed data takes less
- * space, we can overwrite the buffer.
- */
- skb_trim(skb, isdn_audio_xlaw2adpcm(info->adpcmr,
- ifmt,
- skb->data,
- skb->data,
- skb->len));
- break;
- case 5:
- /* a-law */
- if (!ifmt)
- isdn_audio_ulaw2alaw(skb->data, skb->len);
- break;
- case 6:
- /* u-law */
- if (ifmt)
- isdn_audio_alaw2ulaw(skb->data, skb->len);
- break;
+ case 2:
+ case 3:
+ case 4:
+ /* adpcm
+ * Since compressed data takes less
+ * space, we can overwrite the buffer.
+ */
+ skb_trim(skb, isdn_audio_xlaw2adpcm(info->adpcmr,
+ ifmt,
+ skb->data,
+ skb->data,
+ skb->len));
+ break;
+ case 5:
+ /* a-law */
+ if (!ifmt)
+ isdn_audio_ulaw2alaw(skb->data, skb->len);
+ break;
+ case 6:
+ /* u-law */
+ if (ifmt)
+ isdn_audio_alaw2ulaw(skb->data, skb->len);
+ break;
}
ISDN_AUDIO_SKB_DLECOUNT(skb) =
isdn_tty_countDLE(skb->data, skb->len);
@@ -275,7 +275,7 @@ isdn_tty_rcv_skb(int i, int di, int channel, struct sk_buff *skb)
}
static void
-isdn_tty_cleanup_xmit(modem_info * info)
+isdn_tty_cleanup_xmit(modem_info *info)
{
skb_queue_purge(&info->xmit_queue);
#ifdef CONFIG_ISDN_AUDIO
@@ -284,7 +284,7 @@ isdn_tty_cleanup_xmit(modem_info * info)
}
static void
-isdn_tty_tint(modem_info * info)
+isdn_tty_tint(modem_info *info)
{
struct sk_buff *skb = skb_dequeue(&info->xmit_queue);
int len, slen;
@@ -325,7 +325,7 @@ isdn_tty_countDLE(unsigned char *buf, int len)
* DLE-decoding when sending audio-data.
*/
static int
-isdn_tty_handleDLEdown(modem_info * info, atemu * m, int len)
+isdn_tty_handleDLEdown(modem_info *info, atemu *m, int len)
{
unsigned char *p = &info->xmit_buf[info->xmit_count];
int count = 0;
@@ -334,42 +334,42 @@ isdn_tty_handleDLEdown(modem_info * info, atemu * m, int len)
if (m->lastDLE) {
m->lastDLE = 0;
switch (*p) {
- case DLE:
- /* Escape code */
- if (len > 1)
- memmove(p, p + 1, len - 1);
- p--;
- count++;
- break;
- case ETX:
- /* End of data */
- info->vonline |= 4;
- return count;
- case DC4:
- /* Abort RX */
- info->vonline &= ~1;
+ case DLE:
+ /* Escape code */
+ if (len > 1)
+ memmove(p, p + 1, len - 1);
+ p--;
+ count++;
+ break;
+ case ETX:
+ /* End of data */
+ info->vonline |= 4;
+ return count;
+ case DC4:
+ /* Abort RX */
+ info->vonline &= ~1;
#ifdef ISDN_DEBUG_MODEM_VOICE
- printk(KERN_DEBUG
- "DLEdown: got DLE-DC4, send DLE-ETX on ttyI%d\n",
- info->line);
+ printk(KERN_DEBUG
+ "DLEdown: got DLE-DC4, send DLE-ETX on ttyI%d\n",
+ info->line);
#endif
- isdn_tty_at_cout("\020\003", info);
- if (!info->vonline) {
+ isdn_tty_at_cout("\020\003", info);
+ if (!info->vonline) {
#ifdef ISDN_DEBUG_MODEM_VOICE
- printk(KERN_DEBUG
- "DLEdown: send VCON on ttyI%d\n",
- info->line);
+ printk(KERN_DEBUG
+ "DLEdown: send VCON on ttyI%d\n",
+ info->line);
#endif
- isdn_tty_at_cout("\r\nVCON\r\n", info);
- }
- /* Fall through */
- case 'q':
- case 's':
- /* Silence */
- if (len > 1)
- memmove(p, p + 1, len - 1);
- p--;
- break;
+ isdn_tty_at_cout("\r\nVCON\r\n", info);
+ }
+ /* Fall through */
+ case 'q':
+ case 's':
+ /* Silence */
+ if (len > 1)
+ memmove(p, p + 1, len - 1);
+ p--;
+ break;
}
} else {
if (*p == DLE)
@@ -416,7 +416,7 @@ static int voice_cf[7] =
* T.70 if necessary, and finally queues it up for sending via isdn_tty_tint.
*/
static void
-isdn_tty_senddown(modem_info * info)
+isdn_tty_senddown(modem_info *info)
{
int buflen;
int skb_res;
@@ -440,9 +440,9 @@ isdn_tty_senddown(modem_info * info)
#endif
if (!(buflen = info->xmit_count))
return;
- if ((info->emu.mdmreg[REG_CTS] & BIT_CTS) != 0)
+ if ((info->emu.mdmreg[REG_CTS] & BIT_CTS) != 0)
info->msr &= ~UART_MSR_CTS;
- info->lsr &= ~UART_LSR_TEMT;
+ info->lsr &= ~UART_LSR_TEMT;
/* info->xmit_count is modified here and in isdn_tty_write().
* So we return here if isdn_tty_write() is in the
* critical section.
@@ -485,32 +485,32 @@ isdn_tty_senddown(modem_info * info)
/* voice conversion/decompression */
switch (info->emu.vpar[3]) {
- case 2:
- case 3:
- case 4:
- /* adpcm, compatible to ZyXel 1496 modem
- * with ROM revision 6.01
- */
- audio_len = isdn_audio_adpcm2xlaw(info->adpcms,
- ifmt,
- skb->data,
- skb_put(skb, audio_len),
- buflen);
- skb_pull(skb, buflen);
- skb_trim(skb, audio_len);
- break;
- case 5:
- /* a-law */
- if (!ifmt)
- isdn_audio_alaw2ulaw(skb->data,
- buflen);
- break;
- case 6:
- /* u-law */
- if (ifmt)
- isdn_audio_ulaw2alaw(skb->data,
- buflen);
- break;
+ case 2:
+ case 3:
+ case 4:
+ /* adpcm, compatible to ZyXel 1496 modem
+ * with ROM revision 6.01
+ */
+ audio_len = isdn_audio_adpcm2xlaw(info->adpcms,
+ ifmt,
+ skb->data,
+ skb_put(skb, audio_len),
+ buflen);
+ skb_pull(skb, buflen);
+ skb_trim(skb, audio_len);
+ break;
+ case 5:
+ /* a-law */
+ if (!ifmt)
+ isdn_audio_alaw2ulaw(skb->data,
+ buflen);
+ break;
+ case 6:
+ /* u-law */
+ if (ifmt)
+ isdn_audio_ulaw2alaw(skb->data,
+ buflen);
+ break;
}
}
#endif /* CONFIG_ISDN_AUDIO */
@@ -550,7 +550,7 @@ isdn_tty_modem_do_ncarrier(unsigned long data)
* low.
*/
static void
-isdn_tty_modem_ncarrier(modem_info * info)
+isdn_tty_modem_ncarrier(modem_info *info)
{
if (info->ncarrier) {
info->nc_timer.expires = jiffies + HZ;
@@ -568,30 +568,30 @@ isdn_calc_usage(int si, int l2)
#ifdef CONFIG_ISDN_AUDIO
if (si == 1) {
- switch(l2) {
- case ISDN_PROTO_L2_MODEM:
- usg = ISDN_USAGE_MODEM;
- break;
+ switch (l2) {
+ case ISDN_PROTO_L2_MODEM:
+ usg = ISDN_USAGE_MODEM;
+ break;
#ifdef CONFIG_ISDN_TTY_FAX
- case ISDN_PROTO_L2_FAX:
- usg = ISDN_USAGE_FAX;
- break;
+ case ISDN_PROTO_L2_FAX:
+ usg = ISDN_USAGE_FAX;
+ break;
#endif
- case ISDN_PROTO_L2_TRANS:
- default:
- usg = ISDN_USAGE_VOICE;
- break;
+ case ISDN_PROTO_L2_TRANS:
+ default:
+ usg = ISDN_USAGE_VOICE;
+ break;
}
}
#endif
- return(usg);
+ return (usg);
}
/* isdn_tty_dial() performs dialing of a tty an the necessary
* setup of the lower levels before that.
*/
static void
-isdn_tty_dial(char *n, modem_info * info, atemu * m)
+isdn_tty_dial(char *n, modem_info *info, atemu *m)
{
int usg = ISDN_USAGE_MODEM;
int si = 7;
@@ -608,10 +608,10 @@ isdn_tty_dial(char *n, modem_info * info, atemu * m)
}
usg = isdn_calc_usage(si, l2);
#ifdef CONFIG_ISDN_AUDIO
- if ((si == 1) &&
- (l2 != ISDN_PROTO_L2_MODEM)
+ if ((si == 1) &&
+ (l2 != ISDN_PROTO_L2_MODEM)
#ifdef CONFIG_ISDN_TTY_FAX
- && (l2 != ISDN_PROTO_L2_FAX)
+ && (l2 != ISDN_PROTO_L2_FAX)
#endif
) {
l2 = ISDN_PROTO_L2_TRANS;
@@ -679,7 +679,7 @@ isdn_tty_dial(char *n, modem_info * info, atemu * m)
* and some cleanup is done also.
*/
void
-isdn_tty_modem_hup(modem_info * info, int local)
+isdn_tty_modem_hup(modem_info *info, int local)
{
isdn_ctrl cmd;
int di, ch;
@@ -723,7 +723,7 @@ isdn_tty_modem_hup(modem_info * info, int local)
info->adpcmr = NULL;
#endif
if ((info->msr & UART_MSR_RI) &&
- (info->emu.mdmreg[REG_RUNG] & BIT_RUNG))
+ (info->emu.mdmreg[REG_RUNG] & BIT_RUNG))
isdn_tty_modem_result(RESULT_RUNG, info);
info->msr &= ~(UART_MSR_DCD | UART_MSR_RI);
info->lsr |= UART_LSR_TEMT;
@@ -746,7 +746,7 @@ isdn_tty_modem_hup(modem_info * info, int local)
}
/*
- * Begin of a CAPI like interface, currently used only for
+ * Begin of a CAPI like interface, currently used only for
* supplementary service (CAPI 2.0 part III)
*/
#include <linux/isdn/capicmd.h>
@@ -754,16 +754,16 @@ isdn_tty_modem_hup(modem_info * info, int local)
int
isdn_tty_capi_facility(capi_msg *cm) {
- return(-1); /* dummy */
+ return (-1); /* dummy */
}
/* isdn_tty_suspend() tries to suspend the current tty connection
*/
static void
-isdn_tty_suspend(char *id, modem_info * info, atemu * m)
+isdn_tty_suspend(char *id, modem_info *info, atemu *m)
{
isdn_ctrl cmd;
-
+
int l;
if (!info)
@@ -774,7 +774,7 @@ isdn_tty_suspend(char *id, modem_info * info, atemu * m)
#endif
l = strlen(id);
if ((info->isdn_driver >= 0)) {
- cmd.parm.cmsg.Length = l+18;
+ cmd.parm.cmsg.Length = l + 18;
cmd.parm.cmsg.Command = CAPI_FACILITY;
cmd.parm.cmsg.Subcommand = CAPI_REQ;
cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
@@ -800,7 +800,7 @@ isdn_tty_suspend(char *id, modem_info * info, atemu * m)
*/
static void
-isdn_tty_resume(char *id, modem_info * info, atemu * m)
+isdn_tty_resume(char *id, modem_info *info, atemu *m)
{
int usg = ISDN_USAGE_MODEM;
int si = 7;
@@ -819,10 +819,10 @@ isdn_tty_resume(char *id, modem_info * info, atemu * m)
}
usg = isdn_calc_usage(si, l2);
#ifdef CONFIG_ISDN_AUDIO
- if ((si == 1) &&
- (l2 != ISDN_PROTO_L2_MODEM)
+ if ((si == 1) &&
+ (l2 != ISDN_PROTO_L2_MODEM)
#ifdef CONFIG_ISDN_TTY_FAX
- && (l2 != ISDN_PROTO_L2_FAX)
+ && (l2 != ISDN_PROTO_L2_FAX)
#endif
) {
l2 = ISDN_PROTO_L2_TRANS;
@@ -864,18 +864,18 @@ isdn_tty_resume(char *id, modem_info * info, atemu * m)
isdn_command(&cmd);
cmd.driver = info->isdn_driver;
cmd.arg = info->isdn_channel;
- cmd.parm.cmsg.Length = l+18;
+ cmd.parm.cmsg.Length = l + 18;
cmd.parm.cmsg.Command = CAPI_FACILITY;
cmd.parm.cmsg.Subcommand = CAPI_REQ;
cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */
cmd.parm.cmsg.para[1] = 0;
- cmd.parm.cmsg.para[2] = l+3;
+ cmd.parm.cmsg.para[2] = l + 3;
cmd.parm.cmsg.para[3] = 5; /* 16 bit 0x0005 Resume */
cmd.parm.cmsg.para[4] = 0;
cmd.parm.cmsg.para[5] = l;
strncpy(&cmd.parm.cmsg.para[6], id, l);
- cmd.command =CAPI_PUT_MESSAGE;
+ cmd.command = CAPI_PUT_MESSAGE;
info->dialing = 1;
// strcpy(dev->num[i], n);
isdn_info_update();
@@ -889,7 +889,7 @@ isdn_tty_resume(char *id, modem_info * info, atemu * m)
*/
static void
-isdn_tty_send_msg(modem_info * info, atemu * m, char *msg)
+isdn_tty_send_msg(modem_info *info, atemu *m, char *msg)
{
int usg = ISDN_USAGE_MODEM;
int si = 7;
@@ -912,10 +912,10 @@ isdn_tty_send_msg(modem_info * info, atemu * m, char *msg)
}
usg = isdn_calc_usage(si, l2);
#ifdef CONFIG_ISDN_AUDIO
- if ((si == 1) &&
- (l2 != ISDN_PROTO_L2_MODEM)
+ if ((si == 1) &&
+ (l2 != ISDN_PROTO_L2_MODEM)
#ifdef CONFIG_ISDN_TTY_FAX
- && (l2 != ISDN_PROTO_L2_FAX)
+ && (l2 != ISDN_PROTO_L2_FAX)
#endif
) {
l2 = ISDN_PROTO_L2_TRANS;
@@ -956,14 +956,14 @@ isdn_tty_send_msg(modem_info * info, atemu * m, char *msg)
isdn_command(&cmd);
cmd.driver = info->isdn_driver;
cmd.arg = info->isdn_channel;
- cmd.parm.cmsg.Length = l+14;
+ cmd.parm.cmsg.Length = l + 14;
cmd.parm.cmsg.Command = CAPI_MANUFACTURER;
cmd.parm.cmsg.Subcommand = CAPI_REQ;
cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
- cmd.parm.cmsg.para[0] = l+1;
+ cmd.parm.cmsg.para[0] = l + 1;
strncpy(&cmd.parm.cmsg.para[1], msg, l);
- cmd.parm.cmsg.para[l+1] = 0xd;
- cmd.command =CAPI_PUT_MESSAGE;
+ cmd.parm.cmsg.para[l + 1] = 0xd;
+ cmd.command = CAPI_PUT_MESSAGE;
/* info->dialing = 1;
strcpy(dev->num[i], n);
isdn_info_update();
@@ -978,7 +978,7 @@ isdn_tty_paranoia_check(modem_info *info, char *name, const char *routine)
#ifdef MODEM_PARANOIA_CHECK
if (!info) {
printk(KERN_WARNING "isdn_tty: null info_struct for %s in %s\n",
- name, routine);
+ name, routine);
return 1;
}
if (info->magic != ISDN_ASYNC_MAGIC) {
@@ -995,11 +995,11 @@ isdn_tty_paranoia_check(modem_info *info, char *name, const char *routine)
* the specified baud rate for a serial port.
*/
static void
-isdn_tty_change_speed(modem_info * info)
+isdn_tty_change_speed(modem_info *info)
{
uint cflag,
- cval,
- quot;
+ cval,
+ quot;
int i;
if (!info->tty || !info->tty->termios)
@@ -1051,7 +1051,7 @@ isdn_tty_change_speed(modem_info * info)
}
static int
-isdn_tty_startup(modem_info * info)
+isdn_tty_startup(modem_info *info)
{
if (info->flags & ISDN_ASYNC_INITIALIZED)
return 0;
@@ -1081,7 +1081,7 @@ isdn_tty_startup(modem_info * info)
* DTR is dropped if the hangup on close termio flag is on.
*/
static void
-isdn_tty_shutdown(modem_info * info)
+isdn_tty_shutdown(modem_info *info)
{
if (!(info->flags & ISDN_ASYNC_INITIALIZED))
return;
@@ -1116,7 +1116,7 @@ isdn_tty_shutdown(modem_info * info)
* - If dialing, abort dial.
*/
static int
-isdn_tty_write(struct tty_struct *tty, const u_char * buf, int count)
+isdn_tty_write(struct tty_struct *tty, const u_char *buf, int count)
{
int c;
int total = 0;
@@ -1176,27 +1176,27 @@ isdn_tty_write(struct tty_struct *tty, const u_char * buf, int count)
}
}
} else
- if (TTY_IS_FCLASS1(info)) {
- int cc = isdn_tty_handleDLEdown(info, m, c);
-
- if (info->vonline & 4) { /* ETX seen */
- isdn_ctrl c;
-
- c.command = ISDN_CMD_FAXCMD;
- c.driver = info->isdn_driver;
- c.arg = info->isdn_channel;
- c.parm.aux.cmd = ISDN_FAX_CLASS1_CTRL;
- c.parm.aux.subcmd = ETX;
- isdn_command(&c);
- }
- info->vonline = 0;
+ if (TTY_IS_FCLASS1(info)) {
+ int cc = isdn_tty_handleDLEdown(info, m, c);
+
+ if (info->vonline & 4) { /* ETX seen */
+ isdn_ctrl c;
+
+ c.command = ISDN_CMD_FAXCMD;
+ c.driver = info->isdn_driver;
+ c.arg = info->isdn_channel;
+ c.parm.aux.cmd = ISDN_FAX_CLASS1_CTRL;
+ c.parm.aux.subcmd = ETX;
+ isdn_command(&c);
+ }
+ info->vonline = 0;
#ifdef ISDN_DEBUG_MODEM_VOICE
- printk(KERN_DEBUG "fax dle cc/c %d/%d\n", cc, c);
+ printk(KERN_DEBUG "fax dle cc/c %d/%d\n", cc, c);
#endif
- info->xmit_count += cc;
- } else
+ info->xmit_count += cc;
+ } else
#endif
- info->xmit_count += c;
+ info->xmit_count += c;
} else {
info->msr |= UART_MSR_CTS;
info->lsr |= UART_LSR_TEMT;
@@ -1332,7 +1332,7 @@ isdn_tty_unthrottle(struct tty_struct *tty)
* allows RS485 driver to be written in user space.
*/
static int
-isdn_tty_get_lsr_info(modem_info * info, uint __user * value)
+isdn_tty_get_lsr_info(modem_info *info, uint __user *value)
{
u_char status;
uint result;
@@ -1363,16 +1363,16 @@ isdn_tty_tiocmget(struct tty_struct *tty)
status = info->msr;
mutex_unlock(&modem_info_mutex);
return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
- | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
- | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0)
- | ((status & UART_MSR_RI) ? TIOCM_RNG : 0)
- | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0)
- | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
+ | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
+ | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0)
+ | ((status & UART_MSR_RI) ? TIOCM_RNG : 0)
+ | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0)
+ | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
}
static int
isdn_tty_tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear)
+ unsigned int set, unsigned int clear)
{
modem_info *info = (modem_info *) tty->driver_data;
@@ -1422,34 +1422,34 @@ isdn_tty_ioctl(struct tty_struct *tty, uint cmd, ulong arg)
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
switch (cmd) {
- case TCSBRK: /* SVID version: non-zero arg --> no break */
+ case TCSBRK: /* SVID version: non-zero arg --> no break */
#ifdef ISDN_DEBUG_MODEM_IOCTL
- printk(KERN_DEBUG "ttyI%d ioctl TCSBRK\n", info->line);
-#endif
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- return 0;
- case TCSBRKP: /* support for POSIX tcsendbreak() */
+ printk(KERN_DEBUG "ttyI%d ioctl TCSBRK\n", info->line);
+#endif
+ retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent(tty, 0);
+ return 0;
+ case TCSBRKP: /* support for POSIX tcsendbreak() */
#ifdef ISDN_DEBUG_MODEM_IOCTL
- printk(KERN_DEBUG "ttyI%d ioctl TCSBRKP\n", info->line);
-#endif
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- return 0;
- case TIOCSERGETLSR: /* Get line status register */
+ printk(KERN_DEBUG "ttyI%d ioctl TCSBRKP\n", info->line);
+#endif
+ retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent(tty, 0);
+ return 0;
+ case TIOCSERGETLSR: /* Get line status register */
#ifdef ISDN_DEBUG_MODEM_IOCTL
- printk(KERN_DEBUG "ttyI%d ioctl TIOCSERGETLSR\n", info->line);
+ printk(KERN_DEBUG "ttyI%d ioctl TIOCSERGETLSR\n", info->line);
#endif
- return isdn_tty_get_lsr_info(info, (uint __user *) arg);
- default:
+ return isdn_tty_get_lsr_info(info, (uint __user *) arg);
+ default:
#ifdef ISDN_DEBUG_MODEM_IOCTL
- printk(KERN_DEBUG "UNKNOWN ioctl 0x%08x on ttyi%d\n", cmd, info->line);
+ printk(KERN_DEBUG "UNKNOWN ioctl 0x%08x on ttyi%d\n", cmd, info->line);
#endif
- return -ENOIOCTLCMD;
+ return -ENOIOCTLCMD;
}
return 0;
}
@@ -1479,7 +1479,7 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
* ------------------------------------------------------------
*/
static int
-isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info * info)
+isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info *info)
{
DECLARE_WAITQUEUE(wait, NULL);
int do_clocal = 0;
@@ -1600,7 +1600,7 @@ isdn_tty_open(struct tty_struct *tty, struct file *filp)
return -ENODEV;
}
#ifdef ISDN_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name,
+ printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name,
info->count);
#endif
info->count++;
@@ -1700,7 +1700,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
timeout = jiffies + HZ;
while (!(info->lsr & UART_LSR_TEMT)) {
schedule_timeout_interruptible(20);
- if (time_after(jiffies,timeout))
+ if (time_after(jiffies, timeout))
break;
}
}
@@ -1743,7 +1743,7 @@ isdn_tty_hangup(struct tty_struct *tty)
/* This routine initializes all emulator-data.
*/
static void
-isdn_tty_reset_profile(atemu * m)
+isdn_tty_reset_profile(atemu *m)
{
m->profile[0] = 0;
m->profile[1] = 0;
@@ -1773,7 +1773,7 @@ isdn_tty_reset_profile(atemu * m)
#ifdef CONFIG_ISDN_AUDIO
static void
-isdn_tty_modem_reset_vpar(atemu * m)
+isdn_tty_modem_reset_vpar(atemu *m)
{
m->vpar[0] = 2; /* Voice-device (2 = phone line) */
m->vpar[1] = 0; /* Silence detection level (0 = none ) */
@@ -1786,7 +1786,7 @@ isdn_tty_modem_reset_vpar(atemu * m)
#ifdef CONFIG_ISDN_TTY_FAX
static void
-isdn_tty_modem_reset_faxpar(modem_info * info)
+isdn_tty_modem_reset_faxpar(modem_info *info)
{
T30_s *f = info->fax;
@@ -1819,7 +1819,7 @@ isdn_tty_modem_reset_faxpar(modem_info * info)
#endif
static void
-isdn_tty_modem_reset_regs(modem_info * info, int force)
+isdn_tty_modem_reset_regs(modem_info *info, int force)
{
atemu *m = &info->emu;
if ((m->mdmreg[REG_DTRR] & BIT_DTRR) || force) {
@@ -1838,7 +1838,7 @@ isdn_tty_modem_reset_regs(modem_info * info, int force)
}
static void
-modem_write_profile(atemu * m)
+modem_write_profile(atemu *m)
{
memcpy(m->profile, m->mdmreg, ISDN_MODEM_NUMREG);
memcpy(m->pmsn, m->msn, ISDN_MSNLEN);
@@ -1848,7 +1848,7 @@ modem_write_profile(atemu * m)
}
static const struct tty_operations modem_ops = {
- .open = isdn_tty_open,
+ .open = isdn_tty_open,
.close = isdn_tty_close,
.write = isdn_tty_write,
.flush_chars = isdn_tty_flush_chars,
@@ -1948,7 +1948,7 @@ err_unregister:
kfree(info->xmit_buf - 4);
}
tty_unregister_driver(m->tty_modem);
- err:
+err:
put_tty_driver(m->tty_modem);
m->tty_modem = NULL;
return retval;
@@ -2018,8 +2018,8 @@ isdn_tty_match_icall(char *cid, atemu *emu, int di)
int tmp;
tmp = isdn_msncmp(cid, isdn_map_eaz2msn(emu->msn, di));
#ifdef ISDN_DEBUG_MODEM_ICALL
- printk(KERN_DEBUG "m_fi: mmsn=%s -> tmp=%d\n",
- isdn_map_eaz2msn(emu->msn, di), tmp);
+ printk(KERN_DEBUG "m_fi: mmsn=%s -> tmp=%d\n",
+ isdn_map_eaz2msn(emu->msn, di), tmp);
#endif
return tmp;
}
@@ -2068,8 +2068,8 @@ isdn_tty_find_icall(int di, int ch, setup_parm *setup)
for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
modem_info *info = &dev->mdm.info[i];
- if (info->count == 0)
- continue;
+ if (info->count == 0)
+ continue;
if ((info->emu.mdmreg[REG_SI1] & si2bit[si1]) && /* SI1 is matching */
(info->emu.mdmreg[REG_SI2] == si2)) { /* SI2 is matching */
idx = isdn_dc2minor(di, ch);
@@ -2096,7 +2096,7 @@ isdn_tty_find_icall(int di, int ch, setup_parm *setup)
info->drv_index = idx;
dev->m_idx[idx] = info->line;
dev->usage[idx] &= ISDN_USAGE_EXCLUSIVE;
- dev->usage[idx] |= isdn_calc_usage(si1, info->emu.mdmreg[REG_L2PROT]);
+ dev->usage[idx] |= isdn_calc_usage(si1, info->emu.mdmreg[REG_L2PROT]);
strcpy(dev->num[idx], nr);
strcpy(info->emu.cpn, eaz);
info->emu.mdmreg[REG_SI1I] = si2bit[si1];
@@ -2116,11 +2116,11 @@ isdn_tty_find_icall(int di, int ch, setup_parm *setup)
}
spin_unlock_irqrestore(&dev->lock, flags);
printk(KERN_INFO "isdn_tty: call from %s -> %s %s\n", nr, eaz,
- ((dev->drv[di]->flags & DRV_FLAG_REJBUS) && (wret != 2))? "rejected" : "ignored");
- return (wret == 2)?3:0;
+ ((dev->drv[di]->flags & DRV_FLAG_REJBUS) && (wret != 2)) ? "rejected" : "ignored");
+ return (wret == 2) ? 3 : 0;
}
-#define TTY_IS_ACTIVE(info) \
+#define TTY_IS_ACTIVE(info) \
(info->flags & (ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE))
int
@@ -2135,174 +2135,174 @@ isdn_tty_stat_callback(int i, isdn_ctrl *c)
if ((mi = dev->m_idx[i]) >= 0) {
info = &dev->mdm.info[mi];
switch (c->command) {
- case ISDN_STAT_CINF:
- printk(KERN_DEBUG "CHARGEINFO on ttyI%d: %ld %s\n", info->line, c->arg, c->parm.num);
- info->emu.charge = (unsigned) simple_strtoul(c->parm.num, &e, 10);
- if (e == (char *)c->parm.num)
- info->emu.charge = 0;
-
- break;
- case ISDN_STAT_BSENT:
-#ifdef ISDN_TTY_STAT_DEBUG
- printk(KERN_DEBUG "tty_STAT_BSENT ttyI%d\n", info->line);
-#endif
- if ((info->isdn_driver == c->driver) &&
- (info->isdn_channel == c->arg)) {
- info->msr |= UART_MSR_CTS;
- if (info->send_outstanding)
- if (!(--info->send_outstanding))
- info->lsr |= UART_LSR_TEMT;
- isdn_tty_tint(info);
- return 1;
- }
- break;
- case ISDN_STAT_CAUSE:
+ case ISDN_STAT_CINF:
+ printk(KERN_DEBUG "CHARGEINFO on ttyI%d: %ld %s\n", info->line, c->arg, c->parm.num);
+ info->emu.charge = (unsigned) simple_strtoul(c->parm.num, &e, 10);
+ if (e == (char *)c->parm.num)
+ info->emu.charge = 0;
+
+ break;
+ case ISDN_STAT_BSENT:
#ifdef ISDN_TTY_STAT_DEBUG
- printk(KERN_DEBUG "tty_STAT_CAUSE ttyI%d\n", info->line);
+ printk(KERN_DEBUG "tty_STAT_BSENT ttyI%d\n", info->line);
#endif
- /* Signal cause to tty-device */
- strncpy(info->last_cause, c->parm.num, 5);
+ if ((info->isdn_driver == c->driver) &&
+ (info->isdn_channel == c->arg)) {
+ info->msr |= UART_MSR_CTS;
+ if (info->send_outstanding)
+ if (!(--info->send_outstanding))
+ info->lsr |= UART_LSR_TEMT;
+ isdn_tty_tint(info);
return 1;
- case ISDN_STAT_DISPLAY:
+ }
+ break;
+ case ISDN_STAT_CAUSE:
#ifdef ISDN_TTY_STAT_DEBUG
- printk(KERN_DEBUG "tty_STAT_DISPLAY ttyI%d\n", info->line);
-#endif
- /* Signal display to tty-device */
- if ((info->emu.mdmreg[REG_DISPLAY] & BIT_DISPLAY) &&
- !(info->emu.mdmreg[REG_RESPNUM] & BIT_RESPNUM)) {
- isdn_tty_at_cout("\r\n", info);
- isdn_tty_at_cout("DISPLAY: ", info);
- isdn_tty_at_cout(c->parm.display, info);
- isdn_tty_at_cout("\r\n", info);
- }
- return 1;
- case ISDN_STAT_DCONN:
+ printk(KERN_DEBUG "tty_STAT_CAUSE ttyI%d\n", info->line);
+#endif
+ /* Signal cause to tty-device */
+ strncpy(info->last_cause, c->parm.num, 5);
+ return 1;
+ case ISDN_STAT_DISPLAY:
#ifdef ISDN_TTY_STAT_DEBUG
- printk(KERN_DEBUG "tty_STAT_DCONN ttyI%d\n", info->line);
+ printk(KERN_DEBUG "tty_STAT_DISPLAY ttyI%d\n", info->line);
#endif
- if (TTY_IS_ACTIVE(info)) {
- if (info->dialing == 1) {
- info->dialing = 2;
- return 1;
- }
+ /* Signal display to tty-device */
+ if ((info->emu.mdmreg[REG_DISPLAY] & BIT_DISPLAY) &&
+ !(info->emu.mdmreg[REG_RESPNUM] & BIT_RESPNUM)) {
+ isdn_tty_at_cout("\r\n", info);
+ isdn_tty_at_cout("DISPLAY: ", info);
+ isdn_tty_at_cout(c->parm.display, info);
+ isdn_tty_at_cout("\r\n", info);
+ }
+ return 1;
+ case ISDN_STAT_DCONN:
+#ifdef ISDN_TTY_STAT_DEBUG
+ printk(KERN_DEBUG "tty_STAT_DCONN ttyI%d\n", info->line);
+#endif
+ if (TTY_IS_ACTIVE(info)) {
+ if (info->dialing == 1) {
+ info->dialing = 2;
+ return 1;
}
- break;
- case ISDN_STAT_DHUP:
+ }
+ break;
+ case ISDN_STAT_DHUP:
#ifdef ISDN_TTY_STAT_DEBUG
- printk(KERN_DEBUG "tty_STAT_DHUP ttyI%d\n", info->line);
+ printk(KERN_DEBUG "tty_STAT_DHUP ttyI%d\n", info->line);
#endif
- if (TTY_IS_ACTIVE(info)) {
- if (info->dialing == 1)
- isdn_tty_modem_result(RESULT_BUSY, info);
- if (info->dialing > 1)
- isdn_tty_modem_result(RESULT_NO_CARRIER, info);
- info->dialing = 0;
+ if (TTY_IS_ACTIVE(info)) {
+ if (info->dialing == 1)
+ isdn_tty_modem_result(RESULT_BUSY, info);
+ if (info->dialing > 1)
+ isdn_tty_modem_result(RESULT_NO_CARRIER, info);
+ info->dialing = 0;
#ifdef ISDN_DEBUG_MODEM_HUP
- printk(KERN_DEBUG "Mhup in ISDN_STAT_DHUP\n");
+ printk(KERN_DEBUG "Mhup in ISDN_STAT_DHUP\n");
#endif
- isdn_tty_modem_hup(info, 0);
- return 1;
- }
- break;
- case ISDN_STAT_BCONN:
+ isdn_tty_modem_hup(info, 0);
+ return 1;
+ }
+ break;
+ case ISDN_STAT_BCONN:
#ifdef ISDN_TTY_STAT_DEBUG
- printk(KERN_DEBUG "tty_STAT_BCONN ttyI%d\n", info->line);
-#endif
- /* Wake up any processes waiting
- * for incoming call of this device when
- * DCD follow the state of incoming carrier
- */
- if (info->blocked_open &&
- (info->emu.mdmreg[REG_DCD] & BIT_DCD)) {
- wake_up_interruptible(&info->open_wait);
- }
+ printk(KERN_DEBUG "tty_STAT_BCONN ttyI%d\n", info->line);
+#endif
+ /* Wake up any processes waiting
+ * for incoming call of this device when
+ * DCD follow the state of incoming carrier
+ */
+ if (info->blocked_open &&
+ (info->emu.mdmreg[REG_DCD] & BIT_DCD)) {
+ wake_up_interruptible(&info->open_wait);
+ }
- /* Schedule CONNECT-Message to any tty
- * waiting for it and
- * set DCD-bit of its modem-status.
- */
- if (TTY_IS_ACTIVE(info) ||
- (info->blocked_open && (info->emu.mdmreg[REG_DCD] & BIT_DCD))) {
- info->msr |= UART_MSR_DCD;
- info->emu.charge = 0;
- if (info->dialing & 0xf)
- info->last_dir = 1;
- else
- info->last_dir = 0;
- info->dialing = 0;
- info->rcvsched = 1;
- if (USG_MODEM(dev->usage[i])) {
- if (info->emu.mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) {
- strcpy(info->emu.connmsg, c->parm.num);
- isdn_tty_modem_result(RESULT_CONNECT, info);
- } else
- isdn_tty_modem_result(RESULT_CONNECT64000, info);
- }
- if (USG_VOICE(dev->usage[i]))
- isdn_tty_modem_result(RESULT_VCON, info);
- return 1;
+ /* Schedule CONNECT-Message to any tty
+ * waiting for it and
+ * set DCD-bit of its modem-status.
+ */
+ if (TTY_IS_ACTIVE(info) ||
+ (info->blocked_open && (info->emu.mdmreg[REG_DCD] & BIT_DCD))) {
+ info->msr |= UART_MSR_DCD;
+ info->emu.charge = 0;
+ if (info->dialing & 0xf)
+ info->last_dir = 1;
+ else
+ info->last_dir = 0;
+ info->dialing = 0;
+ info->rcvsched = 1;
+ if (USG_MODEM(dev->usage[i])) {
+ if (info->emu.mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) {
+ strcpy(info->emu.connmsg, c->parm.num);
+ isdn_tty_modem_result(RESULT_CONNECT, info);
+ } else
+ isdn_tty_modem_result(RESULT_CONNECT64000, info);
}
- break;
- case ISDN_STAT_BHUP:
+ if (USG_VOICE(dev->usage[i]))
+ isdn_tty_modem_result(RESULT_VCON, info);
+ return 1;
+ }
+ break;
+ case ISDN_STAT_BHUP:
#ifdef ISDN_TTY_STAT_DEBUG
- printk(KERN_DEBUG "tty_STAT_BHUP ttyI%d\n", info->line);
+ printk(KERN_DEBUG "tty_STAT_BHUP ttyI%d\n", info->line);
#endif
- if (TTY_IS_ACTIVE(info)) {
+ if (TTY_IS_ACTIVE(info)) {
#ifdef ISDN_DEBUG_MODEM_HUP
- printk(KERN_DEBUG "Mhup in ISDN_STAT_BHUP\n");
+ printk(KERN_DEBUG "Mhup in ISDN_STAT_BHUP\n");
#endif
- isdn_tty_modem_hup(info, 0);
- return 1;
- }
- break;
- case ISDN_STAT_NODCH:
+ isdn_tty_modem_hup(info, 0);
+ return 1;
+ }
+ break;
+ case ISDN_STAT_NODCH:
#ifdef ISDN_TTY_STAT_DEBUG
- printk(KERN_DEBUG "tty_STAT_NODCH ttyI%d\n", info->line);
-#endif
- if (TTY_IS_ACTIVE(info)) {
- if (info->dialing) {
- info->dialing = 0;
- info->last_l2 = -1;
- info->last_si = 0;
- sprintf(info->last_cause, "0000");
- isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
- }
- isdn_tty_modem_hup(info, 0);
- return 1;
+ printk(KERN_DEBUG "tty_STAT_NODCH ttyI%d\n", info->line);
+#endif
+ if (TTY_IS_ACTIVE(info)) {
+ if (info->dialing) {
+ info->dialing = 0;
+ info->last_l2 = -1;
+ info->last_si = 0;
+ sprintf(info->last_cause, "0000");
+ isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
}
- break;
- case ISDN_STAT_UNLOAD:
+ isdn_tty_modem_hup(info, 0);
+ return 1;
+ }
+ break;
+ case ISDN_STAT_UNLOAD:
#ifdef ISDN_TTY_STAT_DEBUG
- printk(KERN_DEBUG "tty_STAT_UNLOAD ttyI%d\n", info->line);
+ printk(KERN_DEBUG "tty_STAT_UNLOAD ttyI%d\n", info->line);
#endif
- for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
- info = &dev->mdm.info[i];
- if (info->isdn_driver == c->driver) {
- if (info->online)
- isdn_tty_modem_hup(info, 1);
- }
+ for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
+ info = &dev->mdm.info[i];
+ if (info->isdn_driver == c->driver) {
+ if (info->online)
+ isdn_tty_modem_hup(info, 1);
}
- return 1;
+ }
+ return 1;
#ifdef CONFIG_ISDN_TTY_FAX
- case ISDN_STAT_FAXIND:
- if (TTY_IS_ACTIVE(info)) {
- isdn_tty_fax_command(info, c);
- }
- break;
+ case ISDN_STAT_FAXIND:
+ if (TTY_IS_ACTIVE(info)) {
+ isdn_tty_fax_command(info, c);
+ }
+ break;
#endif
#ifdef CONFIG_ISDN_AUDIO
- case ISDN_STAT_AUDIO:
- if (TTY_IS_ACTIVE(info)) {
- switch(c->parm.num[0]) {
- case ISDN_AUDIO_DTMF:
- if (info->vonline) {
- isdn_audio_put_dle_code(info,
+ case ISDN_STAT_AUDIO:
+ if (TTY_IS_ACTIVE(info)) {
+ switch (c->parm.num[0]) {
+ case ISDN_AUDIO_DTMF:
+ if (info->vonline) {
+ isdn_audio_put_dle_code(info,
c->parm.num[1]);
- }
- break;
}
+ break;
}
- break;
+ }
+ break;
#endif
}
}
@@ -2311,16 +2311,16 @@ isdn_tty_stat_callback(int i, isdn_ctrl *c)
/*********************************************************************
Modem-Emulator-Routines
- *********************************************************************/
+*********************************************************************/
-#define cmdchar(c) ((c>=' ')&&(c<=0x7f))
+#define cmdchar(c) ((c >= ' ') && (c <= 0x7f))
/*
* Put a message from the AT-emulator into receive-buffer of tty,
* convert CR, LF, and BS to values in modem-registers 3, 4 and 5.
*/
void
-isdn_tty_at_cout(char *msg, modem_info * info)
+isdn_tty_at_cout(char *msg, modem_info *info)
{
struct tty_struct *tty;
atemu *m = &info->emu;
@@ -2348,7 +2348,7 @@ isdn_tty_at_cout(char *msg, modem_info * info)
/* use queue instead of direct, if online and */
/* data is in queue or buffer is full */
if (info->online && ((tty_buffer_request_room(tty, l) < l) ||
- !skb_queue_empty(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel]))) {
+ !skb_queue_empty(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel]))) {
skb = alloc_skb(l, GFP_ATOMIC);
if (!skb) {
spin_unlock_irqrestore(&info->readlock, flags);
@@ -2363,22 +2363,22 @@ isdn_tty_at_cout(char *msg, modem_info * info)
for (p = msg; *p; p++) {
switch (*p) {
- case '\r':
- c = m->mdmreg[REG_CR];
- break;
- case '\n':
- c = m->mdmreg[REG_LF];
- break;
- case '\b':
- c = m->mdmreg[REG_BS];
- break;
- default:
- c = *p;
+ case '\r':
+ c = m->mdmreg[REG_CR];
+ break;
+ case '\n':
+ c = m->mdmreg[REG_LF];
+ break;
+ case '\b':
+ c = m->mdmreg[REG_BS];
+ break;
+ default:
+ c = *p;
}
if (skb) {
*sp++ = c;
} else {
- if(tty_insert_flip_char(tty, c, TTY_NORMAL) == 0)
+ if (tty_insert_flip_char(tty, c, TTY_NORMAL) == 0)
break;
}
}
@@ -2400,7 +2400,7 @@ isdn_tty_at_cout(char *msg, modem_info * info)
* Perform ATH Hangup
*/
static void
-isdn_tty_on_hook(modem_info * info)
+isdn_tty_on_hook(modem_info *info)
{
if (info->isdn_channel >= 0) {
#ifdef ISDN_DEBUG_MODEM_HUP
@@ -2416,8 +2416,8 @@ isdn_tty_off_hook(void)
printk(KERN_DEBUG "isdn_tty_off_hook\n");
}
-#define PLUSWAIT1 (HZ/2) /* 0.5 sec. */
-#define PLUSWAIT2 (HZ*3/2) /* 1.5 sec */
+#define PLUSWAIT1 (HZ / 2) /* 0.5 sec. */
+#define PLUSWAIT2 (HZ * 3 / 2) /* 1.5 sec */
/*
* Check Buffer for Modem-escape-sequence, activate timer-callback to
@@ -2431,7 +2431,7 @@ isdn_tty_off_hook(void)
* lastplus timestamp of last character
*/
static void
-isdn_tty_check_esc(const u_char * p, u_char plus, int count, int *pluscount,
+isdn_tty_check_esc(const u_char *p, u_char plus, int count, int *pluscount,
u_long *lastplus)
{
if (plus > 127)
@@ -2471,69 +2471,69 @@ isdn_tty_check_esc(const u_char * p, u_char plus, int count, int *pluscount,
*/
static void
-isdn_tty_modem_result(int code, modem_info * info)
+isdn_tty_modem_result(int code, modem_info *info)
{
atemu *m = &info->emu;
static char *msg[] =
- {"OK", "CONNECT", "RING", "NO CARRIER", "ERROR",
- "CONNECT 64000", "NO DIALTONE", "BUSY", "NO ANSWER",
- "RINGING", "NO MSN/EAZ", "VCON", "RUNG"};
- char s[ISDN_MSNLEN+10];
+ {"OK", "CONNECT", "RING", "NO CARRIER", "ERROR",
+ "CONNECT 64000", "NO DIALTONE", "BUSY", "NO ANSWER",
+ "RINGING", "NO MSN/EAZ", "VCON", "RUNG"};
+ char s[ISDN_MSNLEN + 10];
switch (code) {
- case RESULT_RING:
- m->mdmreg[REG_RINGCNT]++;
- if (m->mdmreg[REG_RINGCNT] == m->mdmreg[REG_RINGATA])
- /* Automatically accept incoming call */
- isdn_tty_cmd_ATA(info);
- break;
- case RESULT_NO_CARRIER:
+ case RESULT_RING:
+ m->mdmreg[REG_RINGCNT]++;
+ if (m->mdmreg[REG_RINGCNT] == m->mdmreg[REG_RINGATA])
+ /* Automatically accept incoming call */
+ isdn_tty_cmd_ATA(info);
+ break;
+ case RESULT_NO_CARRIER:
#ifdef ISDN_DEBUG_MODEM_HUP
- printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n",
- (info->flags & ISDN_ASYNC_CLOSING),
- (!info->tty));
-#endif
- m->mdmreg[REG_RINGCNT] = 0;
- del_timer(&info->nc_timer);
- info->ncarrier = 0;
- if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
- return;
- }
+ printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n",
+ (info->flags & ISDN_ASYNC_CLOSING),
+ (!info->tty));
+#endif
+ m->mdmreg[REG_RINGCNT] = 0;
+ del_timer(&info->nc_timer);
+ info->ncarrier = 0;
+ if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
+ return;
+ }
#ifdef CONFIG_ISDN_AUDIO
- if (info->vonline & 1) {
+ if (info->vonline & 1) {
#ifdef ISDN_DEBUG_MODEM_VOICE
- printk(KERN_DEBUG "res3: send DLE-ETX on ttyI%d\n",
- info->line);
+ printk(KERN_DEBUG "res3: send DLE-ETX on ttyI%d\n",
+ info->line);
#endif
- /* voice-recording, add DLE-ETX */
- isdn_tty_at_cout("\020\003", info);
- }
- if (info->vonline & 2) {
+ /* voice-recording, add DLE-ETX */
+ isdn_tty_at_cout("\020\003", info);
+ }
+ if (info->vonline & 2) {
#ifdef ISDN_DEBUG_MODEM_VOICE
- printk(KERN_DEBUG "res3: send DLE-DC4 on ttyI%d\n",
- info->line);
+ printk(KERN_DEBUG "res3: send DLE-DC4 on ttyI%d\n",
+ info->line);
#endif
- /* voice-playing, add DLE-DC4 */
- isdn_tty_at_cout("\020\024", info);
- }
+ /* voice-playing, add DLE-DC4 */
+ isdn_tty_at_cout("\020\024", info);
+ }
#endif
- break;
- case RESULT_CONNECT:
- case RESULT_CONNECT64000:
- sprintf(info->last_cause, "0000");
- if (!info->online)
- info->online = 2;
- break;
- case RESULT_VCON:
+ break;
+ case RESULT_CONNECT:
+ case RESULT_CONNECT64000:
+ sprintf(info->last_cause, "0000");
+ if (!info->online)
+ info->online = 2;
+ break;
+ case RESULT_VCON:
#ifdef ISDN_DEBUG_MODEM_VOICE
- printk(KERN_DEBUG "res3: send VCON on ttyI%d\n",
- info->line);
+ printk(KERN_DEBUG "res3: send VCON on ttyI%d\n",
+ info->line);
#endif
- sprintf(info->last_cause, "0000");
- if (!info->online)
- info->online = 1;
- break;
- } /* switch(code) */
+ sprintf(info->last_cause, "0000");
+ if (!info->online)
+ info->online = 1;
+ break;
+ } /* switch (code) */
if (m->mdmreg[REG_RESP] & BIT_RESP) {
/* Show results */
@@ -2543,87 +2543,87 @@ isdn_tty_modem_result(int code, modem_info * info)
isdn_tty_at_cout(s, info);
} else {
if (code == RESULT_RING) {
- /* return if "show RUNG" and ringcounter>1 */
- if ((m->mdmreg[REG_RUNG] & BIT_RUNG) &&
+ /* return if "show RUNG" and ringcounter>1 */
+ if ((m->mdmreg[REG_RUNG] & BIT_RUNG) &&
(m->mdmreg[REG_RINGCNT] > 1))
- return;
- /* print CID, _before_ _every_ ring */
- if (!(m->mdmreg[REG_CIDONCE] & BIT_CIDONCE)) {
- isdn_tty_at_cout("\r\nCALLER NUMBER: ", info);
- isdn_tty_at_cout(dev->num[info->drv_index], info);
- if (m->mdmreg[REG_CDN] & BIT_CDN) {
- isdn_tty_at_cout("\r\nCALLED NUMBER: ", info);
- isdn_tty_at_cout(info->emu.cpn, info);
- }
- }
+ return;
+ /* print CID, _before_ _every_ ring */
+ if (!(m->mdmreg[REG_CIDONCE] & BIT_CIDONCE)) {
+ isdn_tty_at_cout("\r\nCALLER NUMBER: ", info);
+ isdn_tty_at_cout(dev->num[info->drv_index], info);
+ if (m->mdmreg[REG_CDN] & BIT_CDN) {
+ isdn_tty_at_cout("\r\nCALLED NUMBER: ", info);
+ isdn_tty_at_cout(info->emu.cpn, info);
+ }
+ }
}
isdn_tty_at_cout("\r\n", info);
isdn_tty_at_cout(msg[code], info);
switch (code) {
- case RESULT_CONNECT:
- switch (m->mdmreg[REG_L2PROT]) {
- case ISDN_PROTO_L2_MODEM:
- isdn_tty_at_cout(" ", info);
- isdn_tty_at_cout(m->connmsg, info);
- break;
- }
+ case RESULT_CONNECT:
+ switch (m->mdmreg[REG_L2PROT]) {
+ case ISDN_PROTO_L2_MODEM:
+ isdn_tty_at_cout(" ", info);
+ isdn_tty_at_cout(m->connmsg, info);
break;
- case RESULT_RING:
- /* Append CPN, if enabled */
- if ((m->mdmreg[REG_CPN] & BIT_CPN)) {
- sprintf(s, "/%s", m->cpn);
- isdn_tty_at_cout(s, info);
- }
- /* Print CID only once, _after_ 1st RING */
- if ((m->mdmreg[REG_CIDONCE] & BIT_CIDONCE) &&
- (m->mdmreg[REG_RINGCNT] == 1)) {
- isdn_tty_at_cout("\r\n", info);
- isdn_tty_at_cout("CALLER NUMBER: ", info);
- isdn_tty_at_cout(dev->num[info->drv_index], info);
- if (m->mdmreg[REG_CDN] & BIT_CDN) {
- isdn_tty_at_cout("\r\nCALLED NUMBER: ", info);
- isdn_tty_at_cout(info->emu.cpn, info);
- }
+ }
+ break;
+ case RESULT_RING:
+ /* Append CPN, if enabled */
+ if ((m->mdmreg[REG_CPN] & BIT_CPN)) {
+ sprintf(s, "/%s", m->cpn);
+ isdn_tty_at_cout(s, info);
+ }
+ /* Print CID only once, _after_ 1st RING */
+ if ((m->mdmreg[REG_CIDONCE] & BIT_CIDONCE) &&
+ (m->mdmreg[REG_RINGCNT] == 1)) {
+ isdn_tty_at_cout("\r\n", info);
+ isdn_tty_at_cout("CALLER NUMBER: ", info);
+ isdn_tty_at_cout(dev->num[info->drv_index], info);
+ if (m->mdmreg[REG_CDN] & BIT_CDN) {
+ isdn_tty_at_cout("\r\nCALLED NUMBER: ", info);
+ isdn_tty_at_cout(info->emu.cpn, info);
}
+ }
+ break;
+ case RESULT_NO_CARRIER:
+ case RESULT_NO_DIALTONE:
+ case RESULT_BUSY:
+ case RESULT_NO_ANSWER:
+ m->mdmreg[REG_RINGCNT] = 0;
+ /* Append Cause-Message if enabled */
+ if (m->mdmreg[REG_RESPXT] & BIT_RESPXT) {
+ sprintf(s, "/%s", info->last_cause);
+ isdn_tty_at_cout(s, info);
+ }
+ break;
+ case RESULT_CONNECT64000:
+ /* Append Protocol to CONNECT message */
+ switch (m->mdmreg[REG_L2PROT]) {
+ case ISDN_PROTO_L2_X75I:
+ case ISDN_PROTO_L2_X75UI:
+ case ISDN_PROTO_L2_X75BUI:
+ isdn_tty_at_cout("/X.75", info);
break;
- case RESULT_NO_CARRIER:
- case RESULT_NO_DIALTONE:
- case RESULT_BUSY:
- case RESULT_NO_ANSWER:
- m->mdmreg[REG_RINGCNT] = 0;
- /* Append Cause-Message if enabled */
- if (m->mdmreg[REG_RESPXT] & BIT_RESPXT) {
- sprintf(s, "/%s", info->last_cause);
- isdn_tty_at_cout(s, info);
- }
+ case ISDN_PROTO_L2_HDLC:
+ isdn_tty_at_cout("/HDLC", info);
break;
- case RESULT_CONNECT64000:
- /* Append Protocol to CONNECT message */
- switch (m->mdmreg[REG_L2PROT]) {
- case ISDN_PROTO_L2_X75I:
- case ISDN_PROTO_L2_X75UI:
- case ISDN_PROTO_L2_X75BUI:
- isdn_tty_at_cout("/X.75", info);
- break;
- case ISDN_PROTO_L2_HDLC:
- isdn_tty_at_cout("/HDLC", info);
- break;
- case ISDN_PROTO_L2_V11096:
- isdn_tty_at_cout("/V110/9600", info);
- break;
- case ISDN_PROTO_L2_V11019:
- isdn_tty_at_cout("/V110/19200", info);
- break;
- case ISDN_PROTO_L2_V11038:
- isdn_tty_at_cout("/V110/38400", info);
- break;
- }
- if (m->mdmreg[REG_T70] & BIT_T70) {
- isdn_tty_at_cout("/T.70", info);
- if (m->mdmreg[REG_T70] & BIT_T70_EXT)
- isdn_tty_at_cout("+", info);
- }
+ case ISDN_PROTO_L2_V11096:
+ isdn_tty_at_cout("/V110/9600", info);
+ break;
+ case ISDN_PROTO_L2_V11019:
+ isdn_tty_at_cout("/V110/19200", info);
+ break;
+ case ISDN_PROTO_L2_V11038:
+ isdn_tty_at_cout("/V110/38400", info);
break;
+ }
+ if (m->mdmreg[REG_T70] & BIT_T70) {
+ isdn_tty_at_cout("/T.70", info);
+ if (m->mdmreg[REG_T70] & BIT_T70_EXT)
+ isdn_tty_at_cout("+", info);
+ }
+ break;
}
isdn_tty_at_cout("\r\n", info);
}
@@ -2645,7 +2645,7 @@ isdn_tty_modem_result(int code, modem_info * info)
* Display a modem-register-value.
*/
static void
-isdn_tty_show_profile(int ridx, modem_info * info)
+isdn_tty_show_profile(int ridx, modem_info *info)
{
char v[6];
@@ -2664,7 +2664,7 @@ isdn_tty_get_msnstr(char *n, char **p)
while (((*p[0] >= '0' && *p[0] <= '9') ||
/* Why a comma ??? */
(*p[0] == ',') || (*p[0] == ':')) &&
- (limit--))
+ (limit--))
*n++ = *p[0]++;
*n = '\0';
}
@@ -2673,20 +2673,20 @@ isdn_tty_get_msnstr(char *n, char **p)
* Get phone-number from modem-commandbuffer
*/
static void
-isdn_tty_getdial(char *p, char *q,int cnt)
+isdn_tty_getdial(char *p, char *q, int cnt)
{
int first = 1;
int limit = ISDN_MSNLEN - 1; /* MUST match the size of interface var to avoid
- buffer overflow */
+ buffer overflow */
- while (strchr(" 0123456789,#.*WPTSR-", *p) && *p && --cnt>0) {
+ while (strchr(" 0123456789,#.*WPTSR-", *p) && *p && --cnt > 0) {
if ((*p >= '0' && *p <= '9') || ((*p == 'S') && first) ||
((*p == 'R') && first) ||
(*p == '*') || (*p == '#')) {
*q++ = *p;
limit--;
}
- if(!limit)
+ if (!limit)
break;
p++;
first = 0;
@@ -2698,7 +2698,7 @@ isdn_tty_getdial(char *p, char *q,int cnt)
#define PARSE_ERROR1 { isdn_tty_modem_result(RESULT_ERROR, info); return 1; }
static void
-isdn_tty_report(modem_info * info)
+isdn_tty_report(modem_info *info)
{
atemu *m = &info->emu;
char s[80];
@@ -2710,39 +2710,39 @@ isdn_tty_report(modem_info * info)
isdn_tty_at_cout(s, info);
isdn_tty_at_cout(" Layer-2 Protocol: ", info);
switch (info->last_l2) {
- case ISDN_PROTO_L2_X75I:
- isdn_tty_at_cout("X.75i", info);
- break;
- case ISDN_PROTO_L2_X75UI:
- isdn_tty_at_cout("X.75ui", info);
- break;
- case ISDN_PROTO_L2_X75BUI:
- isdn_tty_at_cout("X.75bui", info);
- break;
- case ISDN_PROTO_L2_HDLC:
- isdn_tty_at_cout("HDLC", info);
- break;
- case ISDN_PROTO_L2_V11096:
- isdn_tty_at_cout("V.110 9600 Baud", info);
- break;
- case ISDN_PROTO_L2_V11019:
- isdn_tty_at_cout("V.110 19200 Baud", info);
- break;
- case ISDN_PROTO_L2_V11038:
- isdn_tty_at_cout("V.110 38400 Baud", info);
- break;
- case ISDN_PROTO_L2_TRANS:
- isdn_tty_at_cout("transparent", info);
- break;
- case ISDN_PROTO_L2_MODEM:
- isdn_tty_at_cout("modem", info);
- break;
- case ISDN_PROTO_L2_FAX:
- isdn_tty_at_cout("fax", info);
- break;
- default:
- isdn_tty_at_cout("unknown", info);
- break;
+ case ISDN_PROTO_L2_X75I:
+ isdn_tty_at_cout("X.75i", info);
+ break;
+ case ISDN_PROTO_L2_X75UI:
+ isdn_tty_at_cout("X.75ui", info);
+ break;
+ case ISDN_PROTO_L2_X75BUI:
+ isdn_tty_at_cout("X.75bui", info);
+ break;
+ case ISDN_PROTO_L2_HDLC:
+ isdn_tty_at_cout("HDLC", info);
+ break;
+ case ISDN_PROTO_L2_V11096:
+ isdn_tty_at_cout("V.110 9600 Baud", info);
+ break;
+ case ISDN_PROTO_L2_V11019:
+ isdn_tty_at_cout("V.110 19200 Baud", info);
+ break;
+ case ISDN_PROTO_L2_V11038:
+ isdn_tty_at_cout("V.110 38400 Baud", info);
+ break;
+ case ISDN_PROTO_L2_TRANS:
+ isdn_tty_at_cout("transparent", info);
+ break;
+ case ISDN_PROTO_L2_MODEM:
+ isdn_tty_at_cout("modem", info);
+ break;
+ case ISDN_PROTO_L2_FAX:
+ isdn_tty_at_cout("fax", info);
+ break;
+ default:
+ isdn_tty_at_cout("unknown", info);
+ break;
}
if (m->mdmreg[REG_T70] & BIT_T70) {
isdn_tty_at_cout("/T.70", info);
@@ -2752,19 +2752,19 @@ isdn_tty_report(modem_info * info)
isdn_tty_at_cout("\r\n", info);
isdn_tty_at_cout(" Service: ", info);
switch (info->last_si) {
- case 1:
- isdn_tty_at_cout("audio\r\n", info);
- break;
- case 5:
- isdn_tty_at_cout("btx\r\n", info);
- break;
- case 7:
- isdn_tty_at_cout("data\r\n", info);
- break;
- default:
- sprintf(s, "%d\r\n", info->last_si);
- isdn_tty_at_cout(s, info);
- break;
+ case 1:
+ isdn_tty_at_cout("audio\r\n", info);
+ break;
+ case 5:
+ isdn_tty_at_cout("btx\r\n", info);
+ break;
+ case 7:
+ isdn_tty_at_cout("data\r\n", info);
+ break;
+ default:
+ sprintf(s, "%d\r\n", info->last_si);
+ isdn_tty_at_cout(s, info);
+ break;
}
sprintf(s, " Hangup location: %s\r\n", info->last_lhup ? "local" : "remote");
isdn_tty_at_cout(s, info);
@@ -2776,7 +2776,7 @@ isdn_tty_report(modem_info * info)
* Parse AT&.. commands.
*/
static int
-isdn_tty_cmd_ATand(char **p, modem_info * info)
+isdn_tty_cmd_ATand(char **p, modem_info *info)
{
atemu *m = &info->emu;
int i;
@@ -2785,224 +2785,224 @@ isdn_tty_cmd_ATand(char **p, modem_info * info)
#define MAXRB (sizeof(rb) - 1)
switch (*p[0]) {
- case 'B':
- /* &B - Set Buffersize */
- p[0]++;
- i = isdn_getnum(p);
- if ((i < 0) || (i > ISDN_SERIAL_XMIT_MAX))
- PARSE_ERROR1;
+ case 'B':
+ /* &B - Set Buffersize */
+ p[0]++;
+ i = isdn_getnum(p);
+ if ((i < 0) || (i > ISDN_SERIAL_XMIT_MAX))
+ PARSE_ERROR1;
#ifdef CONFIG_ISDN_AUDIO
- if ((m->mdmreg[REG_SI1] & 1) && (i > VBUF))
- PARSE_ERROR1;
+ if ((m->mdmreg[REG_SI1] & 1) && (i > VBUF))
+ PARSE_ERROR1;
#endif
- m->mdmreg[REG_PSIZE] = i / 16;
- info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
- switch (m->mdmreg[REG_L2PROT]) {
- case ISDN_PROTO_L2_V11096:
- case ISDN_PROTO_L2_V11019:
- case ISDN_PROTO_L2_V11038:
- info->xmit_size /= 10;
- }
+ m->mdmreg[REG_PSIZE] = i / 16;
+ info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
+ switch (m->mdmreg[REG_L2PROT]) {
+ case ISDN_PROTO_L2_V11096:
+ case ISDN_PROTO_L2_V11019:
+ case ISDN_PROTO_L2_V11038:
+ info->xmit_size /= 10;
+ }
+ break;
+ case 'C':
+ /* &C - DCD Status */
+ p[0]++;
+ switch (isdn_getnum(p)) {
+ case 0:
+ m->mdmreg[REG_DCD] &= ~BIT_DCD;
break;
- case 'C':
- /* &C - DCD Status */
- p[0]++;
- switch (isdn_getnum(p)) {
- case 0:
- m->mdmreg[REG_DCD] &= ~BIT_DCD;
- break;
- case 1:
- m->mdmreg[REG_DCD] |= BIT_DCD;
- break;
- default:
- PARSE_ERROR1
- }
+ case 1:
+ m->mdmreg[REG_DCD] |= BIT_DCD;
break;
- case 'D':
- /* &D - Set DTR-Low-behavior */
- p[0]++;
- switch (isdn_getnum(p)) {
- case 0:
- m->mdmreg[REG_DTRHUP] &= ~BIT_DTRHUP;
- m->mdmreg[REG_DTRR] &= ~BIT_DTRR;
- break;
- case 2:
- m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP;
- m->mdmreg[REG_DTRR] &= ~BIT_DTRR;
- break;
- case 3:
- m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP;
- m->mdmreg[REG_DTRR] |= BIT_DTRR;
- break;
- default:
- PARSE_ERROR1
- }
+ default:
+ PARSE_ERROR1
+ }
+ break;
+ case 'D':
+ /* &D - Set DTR-Low-behavior */
+ p[0]++;
+ switch (isdn_getnum(p)) {
+ case 0:
+ m->mdmreg[REG_DTRHUP] &= ~BIT_DTRHUP;
+ m->mdmreg[REG_DTRR] &= ~BIT_DTRR;
break;
- case 'E':
- /* &E -Set EAZ/MSN */
- p[0]++;
- isdn_tty_get_msnstr(m->msn, p);
+ case 2:
+ m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP;
+ m->mdmreg[REG_DTRR] &= ~BIT_DTRR;
break;
- case 'F':
- /* &F -Set Factory-Defaults */
- p[0]++;
- if (info->msr & UART_MSR_DCD)
- PARSE_ERROR1;
- isdn_tty_reset_profile(m);
- isdn_tty_modem_reset_regs(info, 1);
+ case 3:
+ m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP;
+ m->mdmreg[REG_DTRR] |= BIT_DTRR;
break;
+ default:
+ PARSE_ERROR1
+ }
+ break;
+ case 'E':
+ /* &E -Set EAZ/MSN */
+ p[0]++;
+ isdn_tty_get_msnstr(m->msn, p);
+ break;
+ case 'F':
+ /* &F -Set Factory-Defaults */
+ p[0]++;
+ if (info->msr & UART_MSR_DCD)
+ PARSE_ERROR1;
+ isdn_tty_reset_profile(m);
+ isdn_tty_modem_reset_regs(info, 1);
+ break;
#ifdef DUMMY_HAYES_AT
- case 'K':
- /* only for be compilant with common scripts */
- /* &K Flowcontrol - no function */
- p[0]++;
- isdn_getnum(p);
+ case 'K':
+ /* only for be compilant with common scripts */
+ /* &K Flowcontrol - no function */
+ p[0]++;
+ isdn_getnum(p);
+ break;
+#endif
+ case 'L':
+ /* &L -Set Numbers to listen on */
+ p[0]++;
+ i = 0;
+ while (*p[0] && (strchr("0123456789,-*[]?;", *p[0])) &&
+ (i < ISDN_LMSNLEN - 1))
+ m->lmsn[i++] = *p[0]++;
+ m->lmsn[i] = '\0';
+ break;
+ case 'R':
+ /* &R - Set V.110 bitrate adaption */
+ p[0]++;
+ i = isdn_getnum(p);
+ switch (i) {
+ case 0:
+ /* Switch off V.110, back to X.75 */
+ m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
+ m->mdmreg[REG_SI2] = 0;
+ info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
break;
-#endif
- case 'L':
- /* &L -Set Numbers to listen on */
- p[0]++;
- i = 0;
- while (*p[0] && (strchr("0123456789,-*[]?;", *p[0])) &&
- (i < ISDN_LMSNLEN - 1))
- m->lmsn[i++] = *p[0]++;
- m->lmsn[i] = '\0';
- break;
- case 'R':
- /* &R - Set V.110 bitrate adaption */
- p[0]++;
- i = isdn_getnum(p);
- switch (i) {
- case 0:
- /* Switch off V.110, back to X.75 */
- m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
- m->mdmreg[REG_SI2] = 0;
- info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
- break;
- case 9600:
- m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11096;
- m->mdmreg[REG_SI2] = 197;
- info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
- break;
- case 19200:
- m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11019;
- m->mdmreg[REG_SI2] = 199;
- info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
- break;
- case 38400:
- m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11038;
- m->mdmreg[REG_SI2] = 198; /* no existing standard for this */
- info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
- break;
- default:
- PARSE_ERROR1;
- }
- /* Switch off T.70 */
- m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT);
- /* Set Service 7 */
- m->mdmreg[REG_SI1] |= 4;
+ case 9600:
+ m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11096;
+ m->mdmreg[REG_SI2] = 197;
+ info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
break;
- case 'S':
- /* &S - Set Windowsize */
- p[0]++;
- i = isdn_getnum(p);
- if ((i > 0) && (i < 9))
- m->mdmreg[REG_WSIZE] = i;
- else
- PARSE_ERROR1;
+ case 19200:
+ m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11019;
+ m->mdmreg[REG_SI2] = 199;
+ info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
break;
- case 'V':
- /* &V - Show registers */
- p[0]++;
- isdn_tty_at_cout("\r\n", info);
- for (i = 0; i < ISDN_MODEM_NUMREG; i++) {
- sprintf(rb, "S%02d=%03d%s", i,
- m->mdmreg[i], ((i + 1) % 10) ? " " : "\r\n");
- isdn_tty_at_cout(rb, info);
- }
- sprintf(rb, "\r\nEAZ/MSN: %.50s\r\n",
- strlen(m->msn) ? m->msn : "None");
- isdn_tty_at_cout(rb, info);
- if (strlen(m->lmsn)) {
- isdn_tty_at_cout("\r\nListen: ", info);
- isdn_tty_at_cout(m->lmsn, info);
- isdn_tty_at_cout("\r\n", info);
- }
+ case 38400:
+ m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11038;
+ m->mdmreg[REG_SI2] = 198; /* no existing standard for this */
+ info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
break;
- case 'W':
- /* &W - Write Profile */
+ default:
+ PARSE_ERROR1;
+ }
+ /* Switch off T.70 */
+ m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT);
+ /* Set Service 7 */
+ m->mdmreg[REG_SI1] |= 4;
+ break;
+ case 'S':
+ /* &S - Set Windowsize */
+ p[0]++;
+ i = isdn_getnum(p);
+ if ((i > 0) && (i < 9))
+ m->mdmreg[REG_WSIZE] = i;
+ else
+ PARSE_ERROR1;
+ break;
+ case 'V':
+ /* &V - Show registers */
+ p[0]++;
+ isdn_tty_at_cout("\r\n", info);
+ for (i = 0; i < ISDN_MODEM_NUMREG; i++) {
+ sprintf(rb, "S%02d=%03d%s", i,
+ m->mdmreg[i], ((i + 1) % 10) ? " " : "\r\n");
+ isdn_tty_at_cout(rb, info);
+ }
+ sprintf(rb, "\r\nEAZ/MSN: %.50s\r\n",
+ strlen(m->msn) ? m->msn : "None");
+ isdn_tty_at_cout(rb, info);
+ if (strlen(m->lmsn)) {
+ isdn_tty_at_cout("\r\nListen: ", info);
+ isdn_tty_at_cout(m->lmsn, info);
+ isdn_tty_at_cout("\r\n", info);
+ }
+ break;
+ case 'W':
+ /* &W - Write Profile */
+ p[0]++;
+ switch (*p[0]) {
+ case '0':
p[0]++;
- switch (*p[0]) {
- case '0':
- p[0]++;
- modem_write_profile(m);
- break;
- default:
- PARSE_ERROR1;
- }
+ modem_write_profile(m);
break;
- case 'X':
- /* &X - Switch to BTX-Mode and T.70 */
- p[0]++;
- switch (isdn_getnum(p)) {
- case 0:
- m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT);
- info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
- break;
- case 1:
- m->mdmreg[REG_T70] |= BIT_T70;
- m->mdmreg[REG_T70] &= ~BIT_T70_EXT;
- m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
- info->xmit_size = 112;
- m->mdmreg[REG_SI1] = 4;
- m->mdmreg[REG_SI2] = 0;
- break;
- case 2:
- m->mdmreg[REG_T70] |= (BIT_T70 | BIT_T70_EXT);
- m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
- info->xmit_size = 112;
- m->mdmreg[REG_SI1] = 4;
- m->mdmreg[REG_SI2] = 0;
- break;
- default:
- PARSE_ERROR1;
- }
+ default:
+ PARSE_ERROR1;
+ }
+ break;
+ case 'X':
+ /* &X - Switch to BTX-Mode and T.70 */
+ p[0]++;
+ switch (isdn_getnum(p)) {
+ case 0:
+ m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT);
+ info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
+ break;
+ case 1:
+ m->mdmreg[REG_T70] |= BIT_T70;
+ m->mdmreg[REG_T70] &= ~BIT_T70_EXT;
+ m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
+ info->xmit_size = 112;
+ m->mdmreg[REG_SI1] = 4;
+ m->mdmreg[REG_SI2] = 0;
+ break;
+ case 2:
+ m->mdmreg[REG_T70] |= (BIT_T70 | BIT_T70_EXT);
+ m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
+ info->xmit_size = 112;
+ m->mdmreg[REG_SI1] = 4;
+ m->mdmreg[REG_SI2] = 0;
break;
default:
PARSE_ERROR1;
+ }
+ break;
+ default:
+ PARSE_ERROR1;
}
return 0;
}
static int
-isdn_tty_check_ats(int mreg, int mval, modem_info * info, atemu * m)
+isdn_tty_check_ats(int mreg, int mval, modem_info *info, atemu *m)
{
/* Some plausibility checks */
switch (mreg) {
- case REG_L2PROT:
- if (mval > ISDN_PROTO_L2_MAX)
- return 1;
- break;
- case REG_PSIZE:
- if ((mval * 16) > ISDN_SERIAL_XMIT_MAX)
- return 1;
+ case REG_L2PROT:
+ if (mval > ISDN_PROTO_L2_MAX)
+ return 1;
+ break;
+ case REG_PSIZE:
+ if ((mval * 16) > ISDN_SERIAL_XMIT_MAX)
+ return 1;
#ifdef CONFIG_ISDN_AUDIO
- if ((m->mdmreg[REG_SI1] & 1) && (mval > VBUFX))
- return 1;
-#endif
- info->xmit_size = mval * 16;
- switch (m->mdmreg[REG_L2PROT]) {
- case ISDN_PROTO_L2_V11096:
- case ISDN_PROTO_L2_V11019:
- case ISDN_PROTO_L2_V11038:
- info->xmit_size /= 10;
- }
- break;
- case REG_SI1I:
- case REG_PLAN:
- case REG_SCREEN:
- /* readonly registers */
+ if ((m->mdmreg[REG_SI1] & 1) && (mval > VBUFX))
return 1;
+#endif
+ info->xmit_size = mval * 16;
+ switch (m->mdmreg[REG_L2PROT]) {
+ case ISDN_PROTO_L2_V11096:
+ case ISDN_PROTO_L2_V11019:
+ case ISDN_PROTO_L2_V11038:
+ info->xmit_size /= 10;
+ }
+ break;
+ case REG_SI1I:
+ case REG_PLAN:
+ case REG_SCREEN:
+ /* readonly registers */
+ return 1;
}
return 0;
}
@@ -3011,7 +3011,7 @@ isdn_tty_check_ats(int mreg, int mval, modem_info * info, atemu * m)
* Perform ATS command
*/
static int
-isdn_tty_cmd_ATS(char **p, modem_info * info)
+isdn_tty_cmd_ATS(char **p, modem_info *info)
{
atemu *m = &info->emu;
int bitpos;
@@ -3023,52 +3023,52 @@ isdn_tty_cmd_ATS(char **p, modem_info * info)
if (mreg < 0 || mreg >= ISDN_MODEM_NUMREG)
PARSE_ERROR1;
switch (*p[0]) {
+ case '=':
+ p[0]++;
+ mval = isdn_getnum(p);
+ if (mval < 0 || mval > 255)
+ PARSE_ERROR1;
+ if (isdn_tty_check_ats(mreg, mval, info, m))
+ PARSE_ERROR1;
+ m->mdmreg[mreg] = mval;
+ break;
+ case '.':
+ /* Set/Clear a single bit */
+ p[0]++;
+ bitpos = isdn_getnum(p);
+ if ((bitpos < 0) || (bitpos > 7))
+ PARSE_ERROR1;
+ switch (*p[0]) {
case '=':
p[0]++;
- mval = isdn_getnum(p);
- if (mval < 0 || mval > 255)
+ bval = isdn_getnum(p);
+ if (bval < 0 || bval > 1)
PARSE_ERROR1;
+ if (bval)
+ mval = m->mdmreg[mreg] | (1 << bitpos);
+ else
+ mval = m->mdmreg[mreg] & ~(1 << bitpos);
if (isdn_tty_check_ats(mreg, mval, info, m))
PARSE_ERROR1;
m->mdmreg[mreg] = mval;
break;
- case '.':
- /* Set/Clear a single bit */
- p[0]++;
- bitpos = isdn_getnum(p);
- if ((bitpos < 0) || (bitpos > 7))
- PARSE_ERROR1;
- switch (*p[0]) {
- case '=':
- p[0]++;
- bval = isdn_getnum(p);
- if (bval < 0 || bval > 1)
- PARSE_ERROR1;
- if (bval)
- mval = m->mdmreg[mreg] | (1 << bitpos);
- else
- mval = m->mdmreg[mreg] & ~(1 << bitpos);
- if (isdn_tty_check_ats(mreg, mval, info, m))
- PARSE_ERROR1;
- m->mdmreg[mreg] = mval;
- break;
- case '?':
- p[0]++;
- isdn_tty_at_cout("\r\n", info);
- isdn_tty_at_cout((m->mdmreg[mreg] & (1 << bitpos)) ? "1" : "0",
- info);
- break;
- default:
- PARSE_ERROR1;
- }
- break;
case '?':
p[0]++;
- isdn_tty_show_profile(mreg, info);
+ isdn_tty_at_cout("\r\n", info);
+ isdn_tty_at_cout((m->mdmreg[mreg] & (1 << bitpos)) ? "1" : "0",
+ info);
break;
default:
PARSE_ERROR1;
- break;
+ }
+ break;
+ case '?':
+ p[0]++;
+ isdn_tty_show_profile(mreg, info);
+ break;
+ default:
+ PARSE_ERROR1;
+ break;
}
return 0;
}
@@ -3077,7 +3077,7 @@ isdn_tty_cmd_ATS(char **p, modem_info * info)
* Perform ATA command
*/
static void
-isdn_tty_cmd_ATA(modem_info * info)
+isdn_tty_cmd_ATA(modem_info *info)
{
atemu *m = &info->emu;
isdn_ctrl cmd;
@@ -3131,7 +3131,7 @@ isdn_tty_cmd_ATA(modem_info * info)
* Parse AT+F.. commands
*/
static int
-isdn_tty_cmd_PLUSF(char **p, modem_info * info)
+isdn_tty_cmd_PLUSF(char **p, modem_info *info)
{
atemu *m = &info->emu;
char rs[20];
@@ -3139,81 +3139,81 @@ isdn_tty_cmd_PLUSF(char **p, modem_info * info)
if (!strncmp(p[0], "CLASS", 5)) {
p[0] += 5;
switch (*p[0]) {
- case '?':
- p[0]++;
- sprintf(rs, "\r\n%d",
- (m->mdmreg[REG_SI1] & 1) ? 8 : 0);
+ case '?':
+ p[0]++;
+ sprintf(rs, "\r\n%d",
+ (m->mdmreg[REG_SI1] & 1) ? 8 : 0);
#ifdef CONFIG_ISDN_TTY_FAX
- if (TTY_IS_FCLASS2(info))
- sprintf(rs, "\r\n2");
- else if (TTY_IS_FCLASS1(info))
- sprintf(rs, "\r\n1");
+ if (TTY_IS_FCLASS2(info))
+ sprintf(rs, "\r\n2");
+ else if (TTY_IS_FCLASS1(info))
+ sprintf(rs, "\r\n1");
#endif
- isdn_tty_at_cout(rs, info);
- break;
- case '=':
+ isdn_tty_at_cout(rs, info);
+ break;
+ case '=':
+ p[0]++;
+ switch (*p[0]) {
+ case '0':
p[0]++;
- switch (*p[0]) {
- case '0':
- p[0]++;
- m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
- m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS;
- m->mdmreg[REG_SI1] = 4;
- info->xmit_size =
- m->mdmreg[REG_PSIZE] * 16;
- break;
+ m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
+ m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS;
+ m->mdmreg[REG_SI1] = 4;
+ info->xmit_size =
+ m->mdmreg[REG_PSIZE] * 16;
+ break;
#ifdef CONFIG_ISDN_TTY_FAX
- case '1':
- p[0]++;
- if (!(dev->global_features &
- ISDN_FEATURE_L3_FCLASS1))
- PARSE_ERROR1;
- m->mdmreg[REG_SI1] = 1;
- m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX;
- m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS1;
- info->xmit_size =
- m->mdmreg[REG_PSIZE] * 16;
- break;
- case '2':
- p[0]++;
- if (!(dev->global_features &
- ISDN_FEATURE_L3_FCLASS2))
- PARSE_ERROR1;
- m->mdmreg[REG_SI1] = 1;
- m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX;
- m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS2;
- info->xmit_size =
- m->mdmreg[REG_PSIZE] * 16;
- break;
+ case '1':
+ p[0]++;
+ if (!(dev->global_features &
+ ISDN_FEATURE_L3_FCLASS1))
+ PARSE_ERROR1;
+ m->mdmreg[REG_SI1] = 1;
+ m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX;
+ m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS1;
+ info->xmit_size =
+ m->mdmreg[REG_PSIZE] * 16;
+ break;
+ case '2':
+ p[0]++;
+ if (!(dev->global_features &
+ ISDN_FEATURE_L3_FCLASS2))
+ PARSE_ERROR1;
+ m->mdmreg[REG_SI1] = 1;
+ m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX;
+ m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS2;
+ info->xmit_size =
+ m->mdmreg[REG_PSIZE] * 16;
+ break;
#endif
- case '8':
- p[0]++;
- /* L2 will change on dialout with si=1 */
- m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
- m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS;
- m->mdmreg[REG_SI1] = 5;
- info->xmit_size = VBUF;
- break;
- case '?':
- p[0]++;
- strcpy(rs, "\r\n0,");
+ case '8':
+ p[0]++;
+ /* L2 will change on dialout with si=1 */
+ m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
+ m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS;
+ m->mdmreg[REG_SI1] = 5;
+ info->xmit_size = VBUF;
+ break;
+ case '?':
+ p[0]++;
+ strcpy(rs, "\r\n0,");
#ifdef CONFIG_ISDN_TTY_FAX
- if (dev->global_features &
- ISDN_FEATURE_L3_FCLASS1)
- strcat(rs, "1,");
- if (dev->global_features &
- ISDN_FEATURE_L3_FCLASS2)
- strcat(rs, "2,");
-#endif
- strcat(rs, "8");
- isdn_tty_at_cout(rs, info);
- break;
- default:
- PARSE_ERROR1;
- }
+ if (dev->global_features &
+ ISDN_FEATURE_L3_FCLASS1)
+ strcat(rs, "1,");
+ if (dev->global_features &
+ ISDN_FEATURE_L3_FCLASS2)
+ strcat(rs, "2,");
+#endif
+ strcat(rs, "8");
+ isdn_tty_at_cout(rs, info);
break;
default:
PARSE_ERROR1;
+ }
+ break;
+ default:
+ PARSE_ERROR1;
}
return 0;
}
@@ -3228,12 +3228,12 @@ isdn_tty_cmd_PLUSF(char **p, modem_info * info)
* Parse AT+V.. commands
*/
static int
-isdn_tty_cmd_PLUSV(char **p, modem_info * info)
+isdn_tty_cmd_PLUSV(char **p, modem_info *info)
{
atemu *m = &info->emu;
isdn_ctrl cmd;
static char *vcmd[] =
- {"NH", "IP", "LS", "RX", "SD", "SM", "TX", "DD", NULL};
+ {"NH", "IP", "LS", "RX", "SD", "SM", "TX", "DD", NULL};
int i;
int par1;
int par2;
@@ -3248,256 +3248,256 @@ isdn_tty_cmd_PLUSV(char **p, modem_info * info)
i++;
}
switch (i) {
- case 0:
- /* AT+VNH - Auto hangup feature */
+ case 0:
+ /* AT+VNH - Auto hangup feature */
+ switch (*p[0]) {
+ case '?':
+ p[0]++;
+ isdn_tty_at_cout("\r\n1", info);
+ break;
+ case '=':
+ p[0]++;
switch (*p[0]) {
- case '?':
- p[0]++;
- isdn_tty_at_cout("\r\n1", info);
- break;
- case '=':
- p[0]++;
- switch (*p[0]) {
- case '1':
- p[0]++;
- break;
- case '?':
- p[0]++;
- isdn_tty_at_cout("\r\n1", info);
- break;
- default:
- PARSE_ERROR1;
- }
- break;
- default:
- PARSE_ERROR1;
+ case '1':
+ p[0]++;
+ break;
+ case '?':
+ p[0]++;
+ isdn_tty_at_cout("\r\n1", info);
+ break;
+ default:
+ PARSE_ERROR1;
}
break;
- case 1:
- /* AT+VIP - Reset all voice parameters */
- isdn_tty_modem_reset_vpar(m);
+ default:
+ PARSE_ERROR1;
+ }
+ break;
+ case 1:
+ /* AT+VIP - Reset all voice parameters */
+ isdn_tty_modem_reset_vpar(m);
+ break;
+ case 2:
+ /* AT+VLS - Select device, accept incoming call */
+ switch (*p[0]) {
+ case '?':
+ p[0]++;
+ sprintf(rs, "\r\n%d", m->vpar[0]);
+ isdn_tty_at_cout(rs, info);
break;
- case 2:
- /* AT+VLS - Select device, accept incoming call */
+ case '=':
+ p[0]++;
switch (*p[0]) {
- case '?':
- p[0]++;
- sprintf(rs, "\r\n%d", m->vpar[0]);
- isdn_tty_at_cout(rs, info);
- break;
- case '=':
- p[0]++;
- switch (*p[0]) {
- case '0':
- p[0]++;
- m->vpar[0] = 0;
- break;
- case '2':
- p[0]++;
- m->vpar[0] = 2;
- break;
- case '?':
- p[0]++;
- isdn_tty_at_cout("\r\n0,2", info);
- break;
- default:
- PARSE_ERROR1;
- }
- break;
- default:
- PARSE_ERROR1;
- }
- break;
- case 3:
- /* AT+VRX - Start recording */
- if (!m->vpar[0])
- PARSE_ERROR1;
- if (info->online != 1) {
- isdn_tty_modem_result(RESULT_NO_ANSWER, info);
- return 1;
- }
- info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state);
- if (!info->dtmf_state) {
- printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n");
+ case '0':
+ p[0]++;
+ m->vpar[0] = 0;
+ break;
+ case '2':
+ p[0]++;
+ m->vpar[0] = 2;
+ break;
+ case '?':
+ p[0]++;
+ isdn_tty_at_cout("\r\n0,2", info);
+ break;
+ default:
PARSE_ERROR1;
}
- info->silence_state = isdn_audio_silence_init(info->silence_state);
- if (!info->silence_state) {
- printk(KERN_WARNING "isdn_tty: Couldn't malloc silence state\n");
+ break;
+ default:
+ PARSE_ERROR1;
+ }
+ break;
+ case 3:
+ /* AT+VRX - Start recording */
+ if (!m->vpar[0])
+ PARSE_ERROR1;
+ if (info->online != 1) {
+ isdn_tty_modem_result(RESULT_NO_ANSWER, info);
+ return 1;
+ }
+ info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state);
+ if (!info->dtmf_state) {
+ printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n");
+ PARSE_ERROR1;
+ }
+ info->silence_state = isdn_audio_silence_init(info->silence_state);
+ if (!info->silence_state) {
+ printk(KERN_WARNING "isdn_tty: Couldn't malloc silence state\n");
+ PARSE_ERROR1;
+ }
+ if (m->vpar[3] < 5) {
+ info->adpcmr = isdn_audio_adpcm_init(info->adpcmr, m->vpar[3]);
+ if (!info->adpcmr) {
+ printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n");
PARSE_ERROR1;
}
- if (m->vpar[3] < 5) {
- info->adpcmr = isdn_audio_adpcm_init(info->adpcmr, m->vpar[3]);
- if (!info->adpcmr) {
- printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n");
- PARSE_ERROR1;
- }
- }
+ }
#ifdef ISDN_DEBUG_AT
- printk(KERN_DEBUG "AT: +VRX\n");
+ printk(KERN_DEBUG "AT: +VRX\n");
#endif
- info->vonline |= 1;
- isdn_tty_modem_result(RESULT_CONNECT, info);
- return 0;
+ info->vonline |= 1;
+ isdn_tty_modem_result(RESULT_CONNECT, info);
+ return 0;
+ break;
+ case 4:
+ /* AT+VSD - Silence detection */
+ switch (*p[0]) {
+ case '?':
+ p[0]++;
+ sprintf(rs, "\r\n<%d>,<%d>",
+ m->vpar[1],
+ m->vpar[2]);
+ isdn_tty_at_cout(rs, info);
break;
- case 4:
- /* AT+VSD - Silence detection */
- switch (*p[0]) {
- case '?':
- p[0]++;
- sprintf(rs, "\r\n<%d>,<%d>",
- m->vpar[1],
- m->vpar[2]);
- isdn_tty_at_cout(rs, info);
- break;
- case '=':
- p[0]++;
- if ((*p[0]>='0') && (*p[0]<='9')) {
- par1 = isdn_getnum(p);
- if ((par1 < 0) || (par1 > 31))
- PARSE_ERROR1;
- if (*p[0] != ',')
- PARSE_ERROR1;
- p[0]++;
- par2 = isdn_getnum(p);
- if ((par2 < 0) || (par2 > 255))
- PARSE_ERROR1;
- m->vpar[1] = par1;
- m->vpar[2] = par2;
- break;
- } else
- if (*p[0] == '?') {
- p[0]++;
- isdn_tty_at_cout("\r\n<0-31>,<0-255>",
- info);
- break;
- } else
+ case '=':
+ p[0]++;
+ if ((*p[0] >= '0') && (*p[0] <= '9')) {
+ par1 = isdn_getnum(p);
+ if ((par1 < 0) || (par1 > 31))
PARSE_ERROR1;
- break;
- default:
+ if (*p[0] != ',')
PARSE_ERROR1;
- }
- break;
- case 5:
- /* AT+VSM - Select compression */
- switch (*p[0]) {
- case '?':
- p[0]++;
- sprintf(rs, "\r\n<%d>,<%d><8000>",
- m->vpar[3],
- m->vpar[1]);
- isdn_tty_at_cout(rs, info);
- break;
- case '=':
+ p[0]++;
+ par2 = isdn_getnum(p);
+ if ((par2 < 0) || (par2 > 255))
+ PARSE_ERROR1;
+ m->vpar[1] = par1;
+ m->vpar[2] = par2;
+ break;
+ } else
+ if (*p[0] == '?') {
p[0]++;
- switch (*p[0]) {
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- par1 = isdn_getnum(p);
- if ((par1 < 2) || (par1 > 6))
- PARSE_ERROR1;
- m->vpar[3] = par1;
- break;
- case '?':
- p[0]++;
- isdn_tty_at_cout("\r\n2;ADPCM;2;0;(8000)\r\n",
- info);
- isdn_tty_at_cout("3;ADPCM;3;0;(8000)\r\n",
- info);
- isdn_tty_at_cout("4;ADPCM;4;0;(8000)\r\n",
- info);
- isdn_tty_at_cout("5;ALAW;8;0;(8000)\r\n",
- info);
- isdn_tty_at_cout("6;ULAW;8;0;(8000)\r\n",
- info);
- break;
- default:
- PARSE_ERROR1;
- }
+ isdn_tty_at_cout("\r\n<0-31>,<0-255>",
+ info);
break;
- default:
+ } else
PARSE_ERROR1;
- }
break;
- case 6:
- /* AT+VTX - Start sending */
- if (!m->vpar[0])
+ default:
+ PARSE_ERROR1;
+ }
+ break;
+ case 5:
+ /* AT+VSM - Select compression */
+ switch (*p[0]) {
+ case '?':
+ p[0]++;
+ sprintf(rs, "\r\n<%d>,<%d><8000>",
+ m->vpar[3],
+ m->vpar[1]);
+ isdn_tty_at_cout(rs, info);
+ break;
+ case '=':
+ p[0]++;
+ switch (*p[0]) {
+ case '2':
+ case '3':
+ case '4':
+ case '5':
+ case '6':
+ par1 = isdn_getnum(p);
+ if ((par1 < 2) || (par1 > 6))
+ PARSE_ERROR1;
+ m->vpar[3] = par1;
+ break;
+ case '?':
+ p[0]++;
+ isdn_tty_at_cout("\r\n2;ADPCM;2;0;(8000)\r\n",
+ info);
+ isdn_tty_at_cout("3;ADPCM;3;0;(8000)\r\n",
+ info);
+ isdn_tty_at_cout("4;ADPCM;4;0;(8000)\r\n",
+ info);
+ isdn_tty_at_cout("5;ALAW;8;0;(8000)\r\n",
+ info);
+ isdn_tty_at_cout("6;ULAW;8;0;(8000)\r\n",
+ info);
+ break;
+ default:
PARSE_ERROR1;
- if (info->online != 1) {
- isdn_tty_modem_result(RESULT_NO_ANSWER, info);
- return 1;
}
- info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state);
- if (!info->dtmf_state) {
- printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n");
+ break;
+ default:
+ PARSE_ERROR1;
+ }
+ break;
+ case 6:
+ /* AT+VTX - Start sending */
+ if (!m->vpar[0])
+ PARSE_ERROR1;
+ if (info->online != 1) {
+ isdn_tty_modem_result(RESULT_NO_ANSWER, info);
+ return 1;
+ }
+ info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state);
+ if (!info->dtmf_state) {
+ printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n");
+ PARSE_ERROR1;
+ }
+ if (m->vpar[3] < 5) {
+ info->adpcms = isdn_audio_adpcm_init(info->adpcms, m->vpar[3]);
+ if (!info->adpcms) {
+ printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n");
PARSE_ERROR1;
}
- if (m->vpar[3] < 5) {
- info->adpcms = isdn_audio_adpcm_init(info->adpcms, m->vpar[3]);
- if (!info->adpcms) {
- printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n");
- PARSE_ERROR1;
- }
- }
+ }
#ifdef ISDN_DEBUG_AT
- printk(KERN_DEBUG "AT: +VTX\n");
+ printk(KERN_DEBUG "AT: +VTX\n");
#endif
- m->lastDLE = 0;
- info->vonline |= 2;
- isdn_tty_modem_result(RESULT_CONNECT, info);
- return 0;
+ m->lastDLE = 0;
+ info->vonline |= 2;
+ isdn_tty_modem_result(RESULT_CONNECT, info);
+ return 0;
+ break;
+ case 7:
+ /* AT+VDD - DTMF detection */
+ switch (*p[0]) {
+ case '?':
+ p[0]++;
+ sprintf(rs, "\r\n<%d>,<%d>",
+ m->vpar[4],
+ m->vpar[5]);
+ isdn_tty_at_cout(rs, info);
break;
- case 7:
- /* AT+VDD - DTMF detection */
- switch (*p[0]) {
- case '?':
- p[0]++;
- sprintf(rs, "\r\n<%d>,<%d>",
- m->vpar[4],
- m->vpar[5]);
- isdn_tty_at_cout(rs, info);
- break;
- case '=':
- p[0]++;
- if ((*p[0]>='0') && (*p[0]<='9')) {
- if (info->online != 1)
- PARSE_ERROR1;
- par1 = isdn_getnum(p);
- if ((par1 < 0) || (par1 > 15))
- PARSE_ERROR1;
- if (*p[0] != ',')
- PARSE_ERROR1;
- p[0]++;
- par2 = isdn_getnum(p);
- if ((par2 < 0) || (par2 > 255))
- PARSE_ERROR1;
- m->vpar[4] = par1;
- m->vpar[5] = par2;
- cmd.driver = info->isdn_driver;
- cmd.command = ISDN_CMD_AUDIO;
- cmd.arg = info->isdn_channel + (ISDN_AUDIO_SETDD << 8);
- cmd.parm.num[0] = par1;
- cmd.parm.num[1] = par2;
- isdn_command(&cmd);
- break;
- } else
- if (*p[0] == '?') {
- p[0]++;
- isdn_tty_at_cout("\r\n<0-15>,<0-255>",
- info);
- break;
- } else
+ case '=':
+ p[0]++;
+ if ((*p[0] >= '0') && (*p[0] <= '9')) {
+ if (info->online != 1)
PARSE_ERROR1;
+ par1 = isdn_getnum(p);
+ if ((par1 < 0) || (par1 > 15))
+ PARSE_ERROR1;
+ if (*p[0] != ',')
+ PARSE_ERROR1;
+ p[0]++;
+ par2 = isdn_getnum(p);
+ if ((par2 < 0) || (par2 > 255))
+ PARSE_ERROR1;
+ m->vpar[4] = par1;
+ m->vpar[5] = par2;
+ cmd.driver = info->isdn_driver;
+ cmd.command = ISDN_CMD_AUDIO;
+ cmd.arg = info->isdn_channel + (ISDN_AUDIO_SETDD << 8);
+ cmd.parm.num[0] = par1;
+ cmd.parm.num[1] = par2;
+ isdn_command(&cmd);
+ break;
+ } else
+ if (*p[0] == '?') {
+ p[0]++;
+ isdn_tty_at_cout("\r\n<0-15>,<0-255>",
+ info);
break;
- default:
+ } else
PARSE_ERROR1;
- }
break;
default:
PARSE_ERROR1;
+ }
+ break;
+ default:
+ PARSE_ERROR1;
}
return 0;
}
@@ -3507,7 +3507,7 @@ isdn_tty_cmd_PLUSV(char **p, modem_info * info)
* Parse and perform an AT-command-line.
*/
static void
-isdn_tty_parse_at(modem_info * info)
+isdn_tty_parse_at(modem_info *info)
{
atemu *m = &info->emu;
char *p;
@@ -3518,188 +3518,188 @@ isdn_tty_parse_at(modem_info * info)
#endif
for (p = &m->mdmcmd[2]; *p;) {
switch (*p) {
- case ' ':
- p++;
+ case ' ':
+ p++;
+ break;
+ case 'A':
+ /* A - Accept incoming call */
+ p++;
+ isdn_tty_cmd_ATA(info);
+ return;
+ break;
+ case 'D':
+ /* D - Dial */
+ if (info->msr & UART_MSR_DCD)
+ PARSE_ERROR;
+ if (info->msr & UART_MSR_RI) {
+ isdn_tty_modem_result(RESULT_NO_CARRIER, info);
+ return;
+ }
+ isdn_tty_getdial(++p, ds, sizeof ds);
+ p += strlen(p);
+ if (!strlen(m->msn))
+ isdn_tty_modem_result(RESULT_NO_MSN_EAZ, info);
+ else if (strlen(ds))
+ isdn_tty_dial(ds, info, m);
+ else
+ PARSE_ERROR;
+ return;
+ case 'E':
+ /* E - Turn Echo on/off */
+ p++;
+ switch (isdn_getnum(&p)) {
+ case 0:
+ m->mdmreg[REG_ECHO] &= ~BIT_ECHO;
break;
- case 'A':
- /* A - Accept incoming call */
+ case 1:
+ m->mdmreg[REG_ECHO] |= BIT_ECHO;
+ break;
+ default:
+ PARSE_ERROR;
+ }
+ break;
+ case 'H':
+ /* H - On/Off-hook */
+ p++;
+ switch (*p) {
+ case '0':
p++;
- isdn_tty_cmd_ATA(info);
- return;
+ isdn_tty_on_hook(info);
break;
- case 'D':
- /* D - Dial */
- if (info->msr & UART_MSR_DCD)
- PARSE_ERROR;
- if (info->msr & UART_MSR_RI) {
- isdn_tty_modem_result(RESULT_NO_CARRIER, info);
- return;
- }
- isdn_tty_getdial(++p, ds, sizeof ds);
- p += strlen(p);
- if (!strlen(m->msn))
- isdn_tty_modem_result(RESULT_NO_MSN_EAZ, info);
- else if (strlen(ds))
- isdn_tty_dial(ds, info, m);
- else
- PARSE_ERROR;
- return;
- case 'E':
- /* E - Turn Echo on/off */
+ case '1':
p++;
- switch (isdn_getnum(&p)) {
- case 0:
- m->mdmreg[REG_ECHO] &= ~BIT_ECHO;
- break;
- case 1:
- m->mdmreg[REG_ECHO] |= BIT_ECHO;
- break;
- default:
- PARSE_ERROR;
- }
+ isdn_tty_off_hook();
break;
- case 'H':
- /* H - On/Off-hook */
+ default:
+ isdn_tty_on_hook(info);
+ break;
+ }
+ break;
+ case 'I':
+ /* I - Information */
+ p++;
+ isdn_tty_at_cout("\r\nLinux ISDN", info);
+ switch (*p) {
+ case '0':
+ case '1':
p++;
- switch (*p) {
- case '0':
- p++;
- isdn_tty_on_hook(info);
- break;
- case '1':
- p++;
- isdn_tty_off_hook();
- break;
- default:
- isdn_tty_on_hook(info);
- break;
- }
break;
- case 'I':
- /* I - Information */
+ case '2':
p++;
- isdn_tty_at_cout("\r\nLinux ISDN", info);
- switch (*p) {
- case '0':
- case '1':
- p++;
- break;
- case '2':
- p++;
- isdn_tty_report(info);
- break;
- case '3':
- p++;
- snprintf(ds, sizeof(ds), "\r\n%d", info->emu.charge);
- isdn_tty_at_cout(ds, info);
- break;
- default:;
- }
+ isdn_tty_report(info);
break;
-#ifdef DUMMY_HAYES_AT
- case 'L':
- case 'M':
- /* only for be compilant with common scripts */
- /* no function */
+ case '3':
p++;
- isdn_getnum(&p);
+ snprintf(ds, sizeof(ds), "\r\n%d", info->emu.charge);
+ isdn_tty_at_cout(ds, info);
break;
+ default:;
+ }
+ break;
+#ifdef DUMMY_HAYES_AT
+ case 'L':
+ case 'M':
+ /* only for be compilant with common scripts */
+ /* no function */
+ p++;
+ isdn_getnum(&p);
+ break;
#endif
- case 'O':
- /* O - Go online */
- p++;
- if (info->msr & UART_MSR_DCD)
- /* if B-Channel is up */
- isdn_tty_modem_result((m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) ? RESULT_CONNECT:RESULT_CONNECT64000, info);
- else
- isdn_tty_modem_result(RESULT_NO_CARRIER, info);
+ case 'O':
+ /* O - Go online */
+ p++;
+ if (info->msr & UART_MSR_DCD)
+ /* if B-Channel is up */
+ isdn_tty_modem_result((m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) ? RESULT_CONNECT : RESULT_CONNECT64000, info);
+ else
+ isdn_tty_modem_result(RESULT_NO_CARRIER, info);
+ return;
+ case 'Q':
+ /* Q - Turn Emulator messages on/off */
+ p++;
+ switch (isdn_getnum(&p)) {
+ case 0:
+ m->mdmreg[REG_RESP] |= BIT_RESP;
+ break;
+ case 1:
+ m->mdmreg[REG_RESP] &= ~BIT_RESP;
+ break;
+ default:
+ PARSE_ERROR;
+ }
+ break;
+ case 'S':
+ /* S - Set/Get Register */
+ p++;
+ if (isdn_tty_cmd_ATS(&p, info))
return;
- case 'Q':
- /* Q - Turn Emulator messages on/off */
- p++;
- switch (isdn_getnum(&p)) {
- case 0:
- m->mdmreg[REG_RESP] |= BIT_RESP;
- break;
- case 1:
- m->mdmreg[REG_RESP] &= ~BIT_RESP;
- break;
- default:
- PARSE_ERROR;
- }
+ break;
+ case 'V':
+ /* V - Numeric or ASCII Emulator-messages */
+ p++;
+ switch (isdn_getnum(&p)) {
+ case 0:
+ m->mdmreg[REG_RESP] |= BIT_RESPNUM;
+ break;
+ case 1:
+ m->mdmreg[REG_RESP] &= ~BIT_RESPNUM;
break;
- case 'S':
- /* S - Set/Get Register */
+ default:
+ PARSE_ERROR;
+ }
+ break;
+ case 'Z':
+ /* Z - Load Registers from Profile */
+ p++;
+ if (info->msr & UART_MSR_DCD) {
+ info->online = 0;
+ isdn_tty_on_hook(info);
+ }
+ isdn_tty_modem_reset_regs(info, 1);
+ break;
+ case '+':
+ p++;
+ switch (*p) {
+#ifdef CONFIG_ISDN_AUDIO
+ case 'F':
p++;
- if (isdn_tty_cmd_ATS(&p, info))
+ if (isdn_tty_cmd_PLUSF(&p, info))
return;
break;
case 'V':
- /* V - Numeric or ASCII Emulator-messages */
+ if ((!(m->mdmreg[REG_SI1] & 1)) ||
+ (m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM))
+ PARSE_ERROR;
p++;
- switch (isdn_getnum(&p)) {
- case 0:
- m->mdmreg[REG_RESP] |= BIT_RESPNUM;
- break;
- case 1:
- m->mdmreg[REG_RESP] &= ~BIT_RESPNUM;
- break;
- default:
- PARSE_ERROR;
- }
+ if (isdn_tty_cmd_PLUSV(&p, info))
+ return;
break;
- case 'Z':
- /* Z - Load Registers from Profile */
+#endif /* CONFIG_ISDN_AUDIO */
+ case 'S': /* SUSPEND */
p++;
- if (info->msr & UART_MSR_DCD) {
- info->online = 0;
- isdn_tty_on_hook(info);
- }
- isdn_tty_modem_reset_regs(info, 1);
+ isdn_tty_get_msnstr(ds, &p);
+ isdn_tty_suspend(ds, info, m);
break;
- case '+':
+ case 'R': /* RESUME */
p++;
- switch (*p) {
-#ifdef CONFIG_ISDN_AUDIO
- case 'F':
- p++;
- if (isdn_tty_cmd_PLUSF(&p, info))
- return;
- break;
- case 'V':
- if ((!(m->mdmreg[REG_SI1] & 1)) ||
- (m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM))
- PARSE_ERROR;
- p++;
- if (isdn_tty_cmd_PLUSV(&p, info))
- return;
- break;
-#endif /* CONFIG_ISDN_AUDIO */
- case 'S': /* SUSPEND */
- p++;
- isdn_tty_get_msnstr(ds, &p);
- isdn_tty_suspend(ds, info, m);
- break;
- case 'R': /* RESUME */
- p++;
- isdn_tty_get_msnstr(ds, &p);
- isdn_tty_resume(ds, info, m);
- break;
- case 'M': /* MESSAGE */
- p++;
- isdn_tty_send_msg(info, m, p);
- break;
- default:
- PARSE_ERROR;
- }
+ isdn_tty_get_msnstr(ds, &p);
+ isdn_tty_resume(ds, info, m);
break;
- case '&':
+ case 'M': /* MESSAGE */
p++;
- if (isdn_tty_cmd_ATand(&p, info))
- return;
+ isdn_tty_send_msg(info, m, p);
break;
default:
PARSE_ERROR;
+ }
+ break;
+ case '&':
+ p++;
+ if (isdn_tty_cmd_ATand(&p, info))
+ return;
+ break;
+ default:
+ PARSE_ERROR;
}
}
#ifdef CONFIG_ISDN_AUDIO
@@ -3711,7 +3711,7 @@ isdn_tty_parse_at(modem_info * info)
/* Need own toupper() because standard-toupper is not available
* within modules.
*/
-#define my_toupper(c) (((c>='a')&&(c<='z'))?(c&0xdf):c)
+#define my_toupper(c) (((c >= 'a') && (c <= 'z')) ? (c & 0xdf) : c)
/*
* Perform line-editing of AT-commands
@@ -3722,7 +3722,7 @@ isdn_tty_parse_at(modem_info * info)
* channel index to line (minor-device)
*/
static int
-isdn_tty_edit_at(const char *p, int count, modem_info * info)
+isdn_tty_edit_at(const char *p, int count, modem_info *info)
{
atemu *m = &info->emu;
int total = 0;
@@ -3765,23 +3765,23 @@ isdn_tty_edit_at(const char *p, int count, modem_info * info)
if (m->mdmcmdl < 255) {
c = my_toupper(c);
switch (m->mdmcmdl) {
- case 1:
- if (c == 'T') {
- m->mdmcmd[m->mdmcmdl] = c;
- m->mdmcmd[++m->mdmcmdl] = 0;
- break;
- } else
- m->mdmcmdl = 0;
- /* Fall through, check for 'A' */
- case 0:
- if (c == 'A') {
- m->mdmcmd[m->mdmcmdl] = c;
- m->mdmcmd[++m->mdmcmdl] = 0;
- }
+ case 1:
+ if (c == 'T') {
+ m->mdmcmd[m->mdmcmdl] = c;
+ m->mdmcmd[++m->mdmcmdl] = 0;
break;
- default:
+ } else
+ m->mdmcmdl = 0;
+ /* Fall through, check for 'A' */
+ case 0:
+ if (c == 'A') {
m->mdmcmd[m->mdmcmdl] = c;
m->mdmcmd[++m->mdmcmdl] = 0;
+ }
+ break;
+ default:
+ m->mdmcmd[m->mdmcmdl] = c;
+ m->mdmcmd[++m->mdmcmdl] = 0;
}
}
}