Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 451 insertions, 0 deletions

diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
new file mode 100644
index 00000000000..94bb83ce7fd
--- /dev/null
+++ b/drivers/isdn/hisax/bkm_a8.c
@@ -0,0 +1,451 @@
+/* $Id: bkm_a8.c,v 1.22.2.4 2004/01/15 14:02:34 keil Exp $
+ *
+ * low level stuff for Scitel Quadro (4*S0, passive)
+ *
+ * Author       Roland Klabunde
+ * Copyright    by Roland Klabunde   <R.Klabunde@Berkom.de>
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include "hisax.h"
+#include "isac.h"
+#include "ipac.h"
+#include "hscx.h"
+#include "isdnl1.h"
+#include <linux/pci.h>
+#include "bkm_ax.h"
+
+#ifdef CONFIG_PCI
+
+#define	ATTEMPT_PCI_REMAPPING	/* Required for PLX rev 1 */
+
+extern const char *CardType[];
+
+const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $";
+
+static const char *sct_quadro_subtypes[] =
+{
+	"",
+	"#1",
+	"#2",
+	"#3",
+	"#4"
+};
+
+
+#define wordout(addr,val) outw(val,addr)
+#define wordin(addr) inw(addr)
+
+static inline u_char
+readreg(unsigned int ale, unsigned int adr, u_char off)
+{
+	register u_char ret;
+	wordout(ale, off);
+	ret = wordin(adr) & 0xFF;
+	return (ret);
+}
+
+static inline void
+readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
+{
+	int i;
+	wordout(ale, off);
+	for (i = 0; i < size; i++)
+		data[i] = wordin(adr) & 0xFF;
+}
+
+
+static inline void
+writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
+{
+	wordout(ale, off);
+	wordout(adr, data);
+}
+
+static inline void
+writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
+{
+	int i;
+	wordout(ale, off);
+	for (i = 0; i < size; i++)
+		wordout(adr, data[i]);
+}
+
+/* Interface functions */
+
+static u_char
+ReadISAC(struct IsdnCardState *cs, u_char offset)
+{
+	return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80));
+}
+
+static void
+WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
+{
+	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80, value);
+}
+
+static void
+ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
+{
+	readfifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
+}
+
+static void
+WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
+{
+	writefifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
+}
+
+
+static u_char
+ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
+{
+	return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0)));
+}
+
+static void
+WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
+{
+	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0), value);
+}
+
+/* Set the specific ipac to active */
+static void
+set_ipac_active(struct IsdnCardState *cs, u_int active)
+{
+	/* set irq mask */
+	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK,
+		active ? 0xc0 : 0xff);
+}
+
+/*
+ * fast interrupt HSCX stuff goes here
+ */
+
+#define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base, \
+	cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0))
+#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base, \
+	cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data)
+#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base, \
+	cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
+#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base, \
+	cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
+
+#include "hscx_irq.c"
+
+static irqreturn_t
+bkm_interrupt_ipac(int intno, void *dev_id, struct pt_regs *regs)
+{
+	struct IsdnCardState *cs = dev_id;
+	u_char ista, val, icnt = 5;
+	u_long flags;
+
+	spin_lock_irqsave(&cs->lock, flags);
+	ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
+	if (!(ista & 0x3f)) { /* not this IPAC */
+		spin_unlock_irqrestore(&cs->lock, flags);
+		return IRQ_NONE;
+	}
+      Start_IPAC:
+	if (cs->debug & L1_DEB_IPAC)
+		debugl1(cs, "IPAC ISTA %02X", ista);
+	if (ista & 0x0f) {
+		val = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, HSCX_ISTA + 0x40);
+		if (ista & 0x01)
+			val |= 0x01;
+		if (ista & 0x04)
+			val |= 0x02;
+		if (ista & 0x08)
+			val |= 0x04;
+		if (val) {
+			hscx_int_main(cs, val);
+		}
+	}
+	if (ista & 0x20) {
+		val = 0xfe & readreg(cs->hw.ax.base, cs->hw.ax.data_adr, ISAC_ISTA | 0x80);
+		if (val) {
+			isac_interrupt(cs, val);
+		}
+	}
+	if (ista & 0x10) {
+		val = 0x01;
+		isac_interrupt(cs, val);
+	}
+	ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
+	if ((ista & 0x3f) && icnt) {
+		icnt--;
+		goto Start_IPAC;
+	}
+	if (!icnt)
+		printk(KERN_WARNING "HiSax: %s (%s) IRQ LOOP\n",
+		       CardType[cs->typ],
+		       sct_quadro_subtypes[cs->subtyp]);
+	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF);
+	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0);
+	spin_unlock_irqrestore(&cs->lock, flags);
+	return IRQ_HANDLED;
+}
+
+void
+release_io_sct_quadro(struct IsdnCardState *cs)
+{
+	release_region(cs->hw.ax.base & 0xffffffc0, 128);
+	if (cs->subtyp == SCT_1)
+		release_region(cs->hw.ax.plx_adr, 64);
+}
+
+static void
+enable_bkm_int(struct IsdnCardState *cs, unsigned bEnable)
+{
+	if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
+		if (bEnable)
+			wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) | 0x41));
+		else
+			wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) & ~0x41));
+	}
+}
+
+static void
+reset_bkm(struct IsdnCardState *cs)
+{
+	if (cs->subtyp == SCT_1) {
+		wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) & ~4));
+		mdelay(10);
+		/* Remove the soft reset */
+		wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) | 4));
+		mdelay(10);
+	}
+}
+
+static int
+BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
+{
+	u_long flags;
+
+	switch (mt) {
+		case CARD_RESET:
+			spin_lock_irqsave(&cs->lock, flags);
+			/* Disable ints */
+			set_ipac_active(cs, 0);
+			enable_bkm_int(cs, 0);
+			reset_bkm(cs);
+			spin_unlock_irqrestore(&cs->lock, flags);
+			return (0);
+		case CARD_RELEASE:
+			/* Sanity */
+			spin_lock_irqsave(&cs->lock, flags);
+			set_ipac_active(cs, 0);
+			enable_bkm_int(cs, 0);
+			spin_unlock_irqrestore(&cs->lock, flags);
+			release_io_sct_quadro(cs);
+			return (0);
+		case CARD_INIT:
+			spin_lock_irqsave(&cs->lock, flags);
+			cs->debug |= L1_DEB_IPAC;
+			set_ipac_active(cs, 1);
+			inithscxisac(cs, 3);
+			/* Enable ints */
+			enable_bkm_int(cs, 1);
+			spin_unlock_irqrestore(&cs->lock, flags);
+			return (0);
+		case CARD_TEST:
+			return (0);
+	}
+	return (0);
+}
+
+int __init
+sct_alloc_io(u_int adr, u_int len)
+{
+	if (!request_region(adr, len, "scitel")) {
+		printk(KERN_WARNING
+			"HiSax: Scitel port %#x-%#x already in use\n",
+			adr, adr + len);
+		return (1);
+	}
+	return(0);
+}
+
+static struct pci_dev *dev_a8 __initdata = NULL;
+static u16  sub_vendor_id __initdata = 0;
+static u16  sub_sys_id __initdata = 0;
+static u_char pci_bus __initdata = 0;
+static u_char pci_device_fn __initdata = 0;
+static u_char pci_irq __initdata = 0;
+
+#endif /* CONFIG_PCI */
+
+int __init
+setup_sct_quadro(struct IsdnCard *card)
+{
+#ifdef CONFIG_PCI
+	struct IsdnCardState *cs = card->cs;
+	char tmp[64];
+	u_char pci_rev_id;
+	u_int found = 0;
+	u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5;
+
+	strcpy(tmp, sct_quadro_revision);
+	printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
+	if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
+		cs->subtyp = SCT_1;	/* Preset */
+	} else
+		return (0);
+
+	/* Identify subtype by para[0] */
+	if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4)
+		cs->subtyp = card->para[0];
+	else {
+		printk(KERN_WARNING "HiSax: %s: Invalid subcontroller in configuration, default to 1\n",
+			CardType[card->typ]);
+		return (0);
+	}
+	if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
+		(sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
+		return (0);
+	if (cs->subtyp == SCT_1) {
+		while ((dev_a8 = pci_find_device(PCI_VENDOR_ID_PLX,
+			PCI_DEVICE_ID_PLX_9050, dev_a8))) {
+			
+			sub_vendor_id = dev_a8->subsystem_vendor;
+			sub_sys_id = dev_a8->subsystem_device;
+			if ((sub_sys_id == PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) &&
+				(sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
+				if (pci_enable_device(dev_a8))
+					return(0);
+				pci_ioaddr1 = pci_resource_start(dev_a8, 1);
+				pci_irq = dev_a8->irq;
+				pci_bus = dev_a8->bus->number;
+				pci_device_fn = dev_a8->devfn;
+				found = 1;
+				break;
+			}
+		}
+		if (!found) {
+			printk(KERN_WARNING "HiSax: %s (%s): Card not found\n",
+				CardType[card->typ],
+				sct_quadro_subtypes[cs->subtyp]);
+			return (0);
+		}
+#ifdef ATTEMPT_PCI_REMAPPING
+/* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
+		pci_read_config_byte(dev_a8, PCI_REVISION_ID, &pci_rev_id);
+		if ((pci_ioaddr1 & 0x80) && (pci_rev_id == 1)) {
+			printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n",
+				CardType[card->typ],
+				sct_quadro_subtypes[cs->subtyp]);
+			/* Restart PCI negotiation */
+			pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
+			/* Move up by 0x80 byte */
+			pci_ioaddr1 += 0x80;
+			pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
+			pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, pci_ioaddr1);
+			dev_a8->resource[ 1].start = pci_ioaddr1;
+		}
+#endif /* End HACK */
+	}
+	if (!pci_irq) {		/* IRQ range check ?? */
+		printk(KERN_WARNING "HiSax: %s (%s): No IRQ\n",
+		       CardType[card->typ],
+		       sct_quadro_subtypes[cs->subtyp]);
+		return (0);
+	}
+	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_1, &pci_ioaddr1);
+	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_2, &pci_ioaddr2);
+	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_3, &pci_ioaddr3);
+	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
+	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
+	if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) {
+		printk(KERN_WARNING "HiSax: %s (%s): No IO base address(es)\n",
+		       CardType[card->typ],
+		       sct_quadro_subtypes[cs->subtyp]);
+		return (0);
+	}
+	pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
+	pci_ioaddr2 &= PCI_BASE_ADDRESS_IO_MASK;
+	pci_ioaddr3 &= PCI_BASE_ADDRESS_IO_MASK;
+	pci_ioaddr4 &= PCI_BASE_ADDRESS_IO_MASK;
+	pci_ioaddr5 &= PCI_BASE_ADDRESS_IO_MASK;
+	/* Take over */
+	cs->irq = pci_irq;
+	cs->irq_flags |= SA_SHIRQ;
+	/* pci_ioaddr1 is unique to all subdevices */
+	/* pci_ioaddr2 is for the fourth subdevice only */
+	/* pci_ioaddr3 is for the third subdevice only */
+	/* pci_ioaddr4 is for the second subdevice only */
+	/* pci_ioaddr5 is for the first subdevice only */
+	cs->hw.ax.plx_adr = pci_ioaddr1;
+	/* Enter all ipac_base addresses */
+	switch(cs->subtyp) {
+		case 1:
+			cs->hw.ax.base = pci_ioaddr5 + 0x00;
+			if (sct_alloc_io(pci_ioaddr1, 128))
+				return(0);
+			if (sct_alloc_io(pci_ioaddr5, 64))
+				return(0);
+			/* disable all IPAC */
+			writereg(pci_ioaddr5, pci_ioaddr5 + 4,
+				IPAC_MASK, 0xFF);
+			writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
+				IPAC_MASK, 0xFF);
+			writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
+				IPAC_MASK, 0xFF);
+			writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
+				IPAC_MASK, 0xFF);
+			break;
+		case 2:
+			cs->hw.ax.base = pci_ioaddr4 + 0x08;
+			if (sct_alloc_io(pci_ioaddr4, 64))
+				return(0);
+			break;
+		case 3:
+			cs->hw.ax.base = pci_ioaddr3 + 0x10;
+			if (sct_alloc_io(pci_ioaddr3, 64))
+				return(0);
+			break;
+		case 4:
+			cs->hw.ax.base = pci_ioaddr2 + 0x20;
+			if (sct_alloc_io(pci_ioaddr2, 64))
+				return(0);
+			break;
+	}	
+	/* For isac and hscx data path */
+	cs->hw.ax.data_adr = cs->hw.ax.base + 4;
+
+	printk(KERN_INFO "HiSax: %s (%s) configured at 0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
+	       CardType[card->typ],
+	       sct_quadro_subtypes[cs->subtyp],
+	       cs->hw.ax.plx_adr,
+	       cs->hw.ax.base,
+	       cs->hw.ax.data_adr,
+	       cs->irq);
+
+	test_and_set_bit(HW_IPAC, &cs->HW_Flags);
+
+	cs->readisac = &ReadISAC;
+	cs->writeisac = &WriteISAC;
+	cs->readisacfifo = &ReadISACfifo;
+	cs->writeisacfifo = &WriteISACfifo;
+
+	cs->BC_Read_Reg = &ReadHSCX;
+	cs->BC_Write_Reg = &WriteHSCX;
+	cs->BC_Send_Data = &hscx_fill_fifo;
+	cs->cardmsg = &BKM_card_msg;
+	cs->irq_func = &bkm_interrupt_ipac;
+
+	printk(KERN_INFO "HiSax: %s (%s): IPAC Version %d\n",
+		CardType[card->typ],
+		sct_quadro_subtypes[cs->subtyp],
+		readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
+	return (1);
+#else
+	printk(KERN_ERR "HiSax: bkm_a8 only supported on PCI Systems\n");
+#endif /* CONFIG_PCI */
+}