Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

1 files changed, 715 insertions, 715 deletions

diff --git a/drivers/isdn/hardware/eicon/di.c b/drivers/isdn/hardware/eicon/di.c
index cb14ae3e715..cd3fba1add1 100644
--- a/drivers/isdn/hardware/eicon/di.c
+++ b/drivers/isdn/hardware/eicon/di.c
@@ -1,26 +1,26 @@
 
 /*
  *
-  Copyright (c) Eicon Networks, 2002.
+ Copyright (c) Eicon Networks, 2002.
  *
-  This source file is supplied for the use with
-  Eicon Networks range of DIVA Server Adapters.
+ This source file is supplied for the use with
+ Eicon Networks range of DIVA Server Adapters.
  *
-  Eicon File Revision :    2.1
+ Eicon File Revision :    2.1
  *
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 2, or (at your option)
-  any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
  *
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING ANY
-  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-  See the GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING ANY
+ implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU General Public License for more details.
  *
-  You should have received a copy of the GNU General Public License
-  along with this program; if not, write to the Free Software
-  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
 #include "platform.h"
@@ -29,9 +29,9 @@
 #include "di_defs.h"
 #include "di.h"
 #if !defined USE_EXTENDED_DEBUGS
-  #include "dimaint.h"
+#include "dimaint.h"
 #else
-  #define dprintf
+#define dprintf
 #endif
 #include "io.h"
 #include "dfifo.h"
@@ -40,315 +40,315 @@
 /*------------------------------------------------------------------*/
 /* local function prototypes                                        */
 /*------------------------------------------------------------------*/
-void pr_out(ADAPTER * a);
-byte pr_dpc(ADAPTER * a);
-static byte pr_ready(ADAPTER * a);
+void pr_out(ADAPTER *a);
+byte pr_dpc(ADAPTER *a);
+static byte pr_ready(ADAPTER *a);
 static byte isdn_rc(ADAPTER *, byte, byte, byte, word, dword, dword);
 static byte isdn_ind(ADAPTER *, byte, byte, byte, PBUFFER *, byte, word);
 /* -----------------------------------------------------------------
-    Functions used for the extended XDI Debug
-    macros
-    global convergence counter (used by all adapters)
-    Look by the implementation part of the functions
-    about the parameters.
-    If you change the dubugging parameters, then you should update
-    the aididbg.doc in the IDI doc's.
+   Functions used for the extended XDI Debug
+   macros
+   global convergence counter (used by all adapters)
+   Look by the implementation part of the functions
+   about the parameters.
+   If you change the dubugging parameters, then you should update
+   the aididbg.doc in the IDI doc's.
    ----------------------------------------------------------------- */
 #if defined(XDI_USE_XLOG)
 #define XDI_A_NR(_x_) ((byte)(((ISDN_ADAPTER *)(_x_->io))->ANum))
-static void xdi_xlog (byte *msg, word code, int length);
+static void xdi_xlog(byte *msg, word code, int length);
 static byte xdi_xlog_sec = 0;
 #else
 #define XDI_A_NR(_x_) ((byte)0)
 #endif
-static void xdi_xlog_rc_event (byte Adapter,
-                               byte Id, byte Ch, byte Rc, byte cb, byte type);
-static void xdi_xlog_request (byte Adapter, byte Id,
-                              byte Ch, byte Req, byte type);
-static void xdi_xlog_ind (byte Adapter,
-                          byte Id,
-                          byte Ch,
-                          byte Ind,
-                          byte rnr_valid,
-                          byte rnr,
-                          byte type);
+static void xdi_xlog_rc_event(byte Adapter,
+			      byte Id, byte Ch, byte Rc, byte cb, byte type);
+static void xdi_xlog_request(byte Adapter, byte Id,
+			     byte Ch, byte Req, byte type);
+static void xdi_xlog_ind(byte Adapter,
+			 byte Id,
+			 byte Ch,
+			 byte Ind,
+			 byte rnr_valid,
+			 byte rnr,
+			 byte type);
 /*------------------------------------------------------------------*/
 /* output function                                                  */
 /*------------------------------------------------------------------*/
-void pr_out(ADAPTER * a)
+void pr_out(ADAPTER *a)
 {
-  byte e_no;
-  ENTITY  * this = NULL;
-  BUFFERS  *X;
-  word length;
-  word i;
-  word clength;
-  REQ * ReqOut;
-  byte more;
-  byte ReadyCount;
-  byte ReqCount;
-  byte Id;
-  dtrc(dprintf("pr_out"));
-        /* while a request is pending ...                           */
-  e_no = look_req(a);
-  if(!e_no)
-  {
-    dtrc(dprintf("no_req"));
-    return;
-  }
-  ReadyCount = pr_ready(a);
-  if(!ReadyCount)
-  {
-    dtrc(dprintf("not_ready"));
-    return;
-  }
-  ReqCount = 0;
-  while(e_no && ReadyCount) {
-    next_req(a);
-    this = entity_ptr(a, e_no);
+	byte e_no;
+	ENTITY *this = NULL;
+	BUFFERS *X;
+	word length;
+	word i;
+	word clength;
+	REQ *ReqOut;
+	byte more;
+	byte ReadyCount;
+	byte ReqCount;
+	byte Id;
+	dtrc(dprintf("pr_out"));
+	/* while a request is pending ...                           */
+	e_no = look_req(a);
+	if (!e_no)
+	{
+		dtrc(dprintf("no_req"));
+		return;
+	}
+	ReadyCount = pr_ready(a);
+	if (!ReadyCount)
+	{
+		dtrc(dprintf("not_ready"));
+		return;
+	}
+	ReqCount = 0;
+	while (e_no && ReadyCount) {
+		next_req(a);
+		this = entity_ptr(a, e_no);
 #ifdef USE_EXTENDED_DEBUGS
-    if ( !this )
-    {
-      DBG_FTL(("XDI: [%02x] !A%d ==> NULL entity ptr - try to ignore",
-               xdi_xlog_sec++, (int)((ISDN_ADAPTER *)a->io)->ANum))
-      e_no = look_req(a) ;
-      ReadyCount-- ;
-      continue ;
-    }
-    {
-      DBG_TRC((">A%d Id=0x%x Req=0x%x", ((ISDN_ADAPTER *)a->io)->ANum, this->Id, this->Req))
-    }
+		if (!this)
+		{
+			DBG_FTL(("XDI: [%02x] !A%d ==> NULL entity ptr - try to ignore",
+				 xdi_xlog_sec++, (int)((ISDN_ADAPTER *)a->io)->ANum))
+				e_no = look_req(a);
+			ReadyCount--;
+			continue;
+		}
+		{
+			DBG_TRC((">A%d Id=0x%x Req=0x%x", ((ISDN_ADAPTER *)a->io)->ANum, this->Id, this->Req))
+				}
 #else
-    dbug(dprintf("out:Req=%x,Id=%x,Ch=%x",this->Req,this->Id,this->ReqCh));
+		dbug(dprintf("out:Req=%x,Id=%x,Ch=%x", this->Req, this->Id, this->ReqCh));
 #endif
-        /* get address of next available request buffer             */
-    ReqOut = (REQ *)&PR_RAM->B[a->ram_inw(a, &PR_RAM->NextReq)];
+		/* get address of next available request buffer             */
+		ReqOut = (REQ *)&PR_RAM->B[a->ram_inw(a, &PR_RAM->NextReq)];
 #if defined(DIVA_ISTREAM)
-    if (!(a->tx_stream[this->Id]   &&
-        this->Req == N_DATA)) {
+		if (!(a->tx_stream[this->Id]   &&
+		      this->Req == N_DATA)) {
 #endif
-        /* now copy the data from the current data buffer into the  */
-        /* adapters request buffer                                  */
-    length = 0;
-    i = this->XCurrent;
-    X = PTR_X(a,this);
-    while(i<this->XNum && length<270) {
-      clength = min((word)(270-length),(word)(X[i].PLength-this->XOffset));
-      a->ram_out_buffer(a,
-                        &ReqOut->XBuffer.P[length],
-                        PTR_P(a,this,&X[i].P[this->XOffset]),
-                        clength);
-      length +=clength;
-      this->XOffset +=clength;
-      if(this->XOffset==X[i].PLength) {
-        this->XCurrent = (byte)++i;
-        this->XOffset = 0;
-      }
-    }
+			/* now copy the data from the current data buffer into the  */
+			/* adapters request buffer                                  */
+			length = 0;
+			i = this->XCurrent;
+			X = PTR_X(a, this);
+			while (i < this->XNum && length < 270) {
+				clength = min((word)(270 - length), (word)(X[i].PLength-this->XOffset));
+				a->ram_out_buffer(a,
+						  &ReqOut->XBuffer.P[length],
+						  PTR_P(a, this, &X[i].P[this->XOffset]),
+						  clength);
+				length += clength;
+				this->XOffset += clength;
+				if (this->XOffset == X[i].PLength) {
+					this->XCurrent = (byte)++i;
+					this->XOffset = 0;
+				}
+			}
 #if defined(DIVA_ISTREAM)
-   } else { /* Use CMA extension in order to transfer data to the card */
-      i = this->XCurrent;
-      X = PTR_X(a,this);
-      while (i < this->XNum) {
-        diva_istream_write (a,
-                            this->Id,
-                            PTR_P(a,this,&X[i].P[0]),
-                            X[i].PLength,
-                            ((i+1) == this->XNum),
-                            0, 0);
-        this->XCurrent = (byte)++i;
-      }
-      length = 0;
-   }
+		} else { /* Use CMA extension in order to transfer data to the card */
+			i = this->XCurrent;
+			X = PTR_X(a, this);
+			while (i < this->XNum) {
+				diva_istream_write(a,
+						   this->Id,
+						   PTR_P(a, this, &X[i].P[0]),
+						   X[i].PLength,
+						   ((i + 1) == this->XNum),
+						   0, 0);
+				this->XCurrent = (byte)++i;
+			}
+			length = 0;
+		}
 #endif
-    a->ram_outw(a, &ReqOut->XBuffer.length, length);
-    a->ram_out(a, &ReqOut->ReqId, this->Id);
-    a->ram_out(a, &ReqOut->ReqCh, this->ReqCh);
-        /* if it's a specific request (no ASSIGN) ...                */
-    if(this->Id &0x1f) {
-        /* if buffers are left in the list of data buffers do       */
-        /* do chaining (LL_MDATA, N_MDATA)                          */
-      this->More++;
-      if(i<this->XNum && this->MInd) {
-        xdi_xlog_request (XDI_A_NR(a), this->Id, this->ReqCh, this->MInd,
-                          a->IdTypeTable[this->No]);
-        a->ram_out(a, &ReqOut->Req, this->MInd);
-        more = true;
-      }
-      else {
-        xdi_xlog_request (XDI_A_NR(a), this->Id, this->ReqCh, this->Req,
-                          a->IdTypeTable[this->No]);
-        this->More |=XMOREF;
-        a->ram_out(a, &ReqOut->Req, this->Req);
-        more = false;
-        if (a->FlowControlIdTable[this->ReqCh] == this->Id)
-          a->FlowControlSkipTable[this->ReqCh] = true;
-        /*
-           Note that remove request was sent to the card
-           */
-        if (this->Req == REMOVE) {
-          a->misc_flags_table[e_no] |= DIVA_MISC_FLAGS_REMOVE_PENDING;
-        }
-      }
-        /* if we did chaining, this entity is put back into the     */
-        /* request queue                                            */
-      if(more) {
-        req_queue(a,this->No);
-      }
-    }
-        /* else it's a ASSIGN                                       */
-    else {
-        /* save the request code used for buffer chaining           */
-      this->MInd = 0;
-      if (this->Id==BLLC_ID) this->MInd = LL_MDATA;
-      if (this->Id==NL_ID   ||
-          this->Id==TASK_ID ||
-          this->Id==MAN_ID
-        ) this->MInd = N_MDATA;
-        /* send the ASSIGN                                          */
-      a->IdTypeTable[this->No] = this->Id;
-      xdi_xlog_request (XDI_A_NR(a),this->Id,this->ReqCh,this->Req, this->Id);
-      this->More |=XMOREF;
-      a->ram_out(a, &ReqOut->Req, this->Req);
-        /* save the reference of the ASSIGN                         */
-      assign_queue(a, this->No, a->ram_inw(a, &ReqOut->Reference));
-    }
-    a->ram_outw(a, &PR_RAM->NextReq, a->ram_inw(a, &ReqOut->next));
-    ReadyCount--;
-    ReqCount++;
-    e_no = look_req(a);
-  }
-        /* send the filled request buffers to the ISDN adapter      */
-  a->ram_out(a, &PR_RAM->ReqInput,
-             (byte)(a->ram_in(a, &PR_RAM->ReqInput) + ReqCount));
-        /* if it is a 'unreturncoded' UREMOVE request, remove the  */
-        /* Id from our table after sending the request             */
-  if(this && (this->Req==UREMOVE) && this->Id) {
-    Id = this->Id;
-    e_no = a->IdTable[Id];
-    free_entity(a, e_no);
-    for (i = 0; i < 256; i++)
-    {
-      if (a->FlowControlIdTable[i] == Id)
-        a->FlowControlIdTable[i] = 0;
-    }
-    a->IdTable[Id] = 0;
-    this->Id = 0;
-  }
+		a->ram_outw(a, &ReqOut->XBuffer.length, length);
+		a->ram_out(a, &ReqOut->ReqId, this->Id);
+		a->ram_out(a, &ReqOut->ReqCh, this->ReqCh);
+		/* if it's a specific request (no ASSIGN) ...                */
+		if (this->Id & 0x1f) {
+			/* if buffers are left in the list of data buffers do       */
+			/* do chaining (LL_MDATA, N_MDATA)                          */
+			this->More++;
+			if (i < this->XNum && this->MInd) {
+				xdi_xlog_request(XDI_A_NR(a), this->Id, this->ReqCh, this->MInd,
+						 a->IdTypeTable[this->No]);
+				a->ram_out(a, &ReqOut->Req, this->MInd);
+				more = true;
+			}
+			else {
+				xdi_xlog_request(XDI_A_NR(a), this->Id, this->ReqCh, this->Req,
+						 a->IdTypeTable[this->No]);
+				this->More |= XMOREF;
+				a->ram_out(a, &ReqOut->Req, this->Req);
+				more = false;
+				if (a->FlowControlIdTable[this->ReqCh] == this->Id)
+					a->FlowControlSkipTable[this->ReqCh] = true;
+				/*
+				  Note that remove request was sent to the card
+				*/
+				if (this->Req == REMOVE) {
+					a->misc_flags_table[e_no] |= DIVA_MISC_FLAGS_REMOVE_PENDING;
+				}
+			}
+			/* if we did chaining, this entity is put back into the     */
+			/* request queue                                            */
+			if (more) {
+				req_queue(a, this->No);
+			}
+		}
+		/* else it's a ASSIGN                                       */
+		else {
+			/* save the request code used for buffer chaining           */
+			this->MInd = 0;
+			if (this->Id == BLLC_ID) this->MInd = LL_MDATA;
+			if (this->Id == NL_ID ||
+			    this->Id == TASK_ID ||
+			    this->Id == MAN_ID
+				) this->MInd = N_MDATA;
+			/* send the ASSIGN                                          */
+			a->IdTypeTable[this->No] = this->Id;
+			xdi_xlog_request(XDI_A_NR(a), this->Id, this->ReqCh, this->Req, this->Id);
+			this->More |= XMOREF;
+			a->ram_out(a, &ReqOut->Req, this->Req);
+			/* save the reference of the ASSIGN                         */
+			assign_queue(a, this->No, a->ram_inw(a, &ReqOut->Reference));
+		}
+		a->ram_outw(a, &PR_RAM->NextReq, a->ram_inw(a, &ReqOut->next));
+		ReadyCount--;
+		ReqCount++;
+		e_no = look_req(a);
+	}
+	/* send the filled request buffers to the ISDN adapter      */
+	a->ram_out(a, &PR_RAM->ReqInput,
+		   (byte)(a->ram_in(a, &PR_RAM->ReqInput) + ReqCount));
+	/* if it is a 'unreturncoded' UREMOVE request, remove the  */
+	/* Id from our table after sending the request             */
+	if (this && (this->Req == UREMOVE) && this->Id) {
+		Id = this->Id;
+		e_no = a->IdTable[Id];
+		free_entity(a, e_no);
+		for (i = 0; i < 256; i++)
+		{
+			if (a->FlowControlIdTable[i] == Id)
+				a->FlowControlIdTable[i] = 0;
+		}
+		a->IdTable[Id] = 0;
+		this->Id = 0;
+	}
 }
-static byte pr_ready(ADAPTER * a)
+static byte pr_ready(ADAPTER *a)
 {
-  byte ReadyCount;
-  ReadyCount = (byte)(a->ram_in(a, &PR_RAM->ReqOutput) -
-                      a->ram_in(a, &PR_RAM->ReqInput));
-  if(!ReadyCount) {
-    if(!a->ReadyInt) {
-      a->ram_inc(a, &PR_RAM->ReadyInt);
-      a->ReadyInt++;
-    }
-  }
-  return ReadyCount;
+	byte ReadyCount;
+	ReadyCount = (byte)(a->ram_in(a, &PR_RAM->ReqOutput) -
+			    a->ram_in(a, &PR_RAM->ReqInput));
+	if (!ReadyCount) {
+		if (!a->ReadyInt) {
+			a->ram_inc(a, &PR_RAM->ReadyInt);
+			a->ReadyInt++;
+		}
+	}
+	return ReadyCount;
 }
 /*------------------------------------------------------------------*/
 /* isdn interrupt handler                                           */
 /*------------------------------------------------------------------*/
-byte pr_dpc(ADAPTER * a)
+byte pr_dpc(ADAPTER *a)
 {
-  byte Count;
-  RC * RcIn;
-  IND * IndIn;
-  byte c;
-  byte RNRId;
-  byte Rc;
-  byte Ind;
-        /* if return codes are available ...                        */
-  if((Count = a->ram_in(a, &PR_RAM->RcOutput)) != 0) {
-    dtrc(dprintf("#Rc=%x",Count));
-        /* get the buffer address of the first return code          */
-    RcIn = (RC *)&PR_RAM->B[a->ram_inw(a, &PR_RAM->NextRc)];
-        /* for all return codes do ...                              */
-    while(Count--) {
-      if((Rc=a->ram_in(a, &RcIn->Rc)) != 0) {
-        dword tmp[2];
-        /*
-          Get extended information, associated with return code
-          */
-        a->ram_in_buffer(a,
-                         &RcIn->Reserved2[0],
-                         (byte*)&tmp[0],
-                         8);
-        /* call return code handler, if it is not our return code   */
-        /* the handler returns 2                                    */
-        /* for all return codes we process, we clear the Rc field   */
-        isdn_rc(a,
-                Rc,
-                a->ram_in(a, &RcIn->RcId),
-                a->ram_in(a, &RcIn->RcCh),
-                a->ram_inw(a, &RcIn->Reference),
-                tmp[0],  /* type of extended information */
-                tmp[1]); /* extended information        */
-        a->ram_out(a, &RcIn->Rc, 0);
-      }
-        /* get buffer address of next return code                   */
-      RcIn = (RC *)&PR_RAM->B[a->ram_inw(a, &RcIn->next)];
-    }
-        /* clear all return codes (no chaining!)                    */
-    a->ram_out(a, &PR_RAM->RcOutput ,0);
-        /* call output function                                     */
-    pr_out(a);
-  }
-        /* clear RNR flag                                           */
-  RNRId = 0;
-        /* if indications are available ...                         */
-  if((Count = a->ram_in(a, &PR_RAM->IndOutput)) != 0) {
-    dtrc(dprintf("#Ind=%x",Count));
-        /* get the buffer address of the first indication           */
-    IndIn = (IND *)&PR_RAM->B[a->ram_inw(a, &PR_RAM->NextInd)];
-        /* for all indications do ...                               */
-    while(Count--) {
-        /* if the application marks an indication as RNR, all       */
-        /* indications from the same Id delivered in this interrupt */
-        /* are marked RNR                                           */
-      if(RNRId && RNRId==a->ram_in(a, &IndIn->IndId)) {
-        a->ram_out(a, &IndIn->Ind, 0);
-        a->ram_out(a, &IndIn->RNR, true);
-      }
-      else {
-        Ind = a->ram_in(a, &IndIn->Ind);
-        if(Ind) {
-          RNRId = 0;
-        /* call indication handler, a return value of 2 means chain */
-        /* a return value of 1 means RNR                            */
-        /* for all indications we process, we clear the Ind field   */
-          c = isdn_ind(a,
-                       Ind,
-                       a->ram_in(a, &IndIn->IndId),
-                       a->ram_in(a, &IndIn->IndCh),
-                       &IndIn->RBuffer,
-                       a->ram_in(a, &IndIn->MInd),
-                       a->ram_inw(a, &IndIn->MLength));
-          if(c==1) {
-            dtrc(dprintf("RNR"));
-            a->ram_out(a, &IndIn->Ind, 0);
-            RNRId = a->ram_in(a, &IndIn->IndId);
-            a->ram_out(a, &IndIn->RNR, true);
-          }
-        }
-      }
-        /* get buffer address of next indication                    */
-      IndIn = (IND *)&PR_RAM->B[a->ram_inw(a, &IndIn->next)];
-    }
-    a->ram_out(a, &PR_RAM->IndOutput, 0);
-  }
-  return false;
+	byte Count;
+	RC *RcIn;
+	IND *IndIn;
+	byte c;
+	byte RNRId;
+	byte Rc;
+	byte Ind;
+	/* if return codes are available ...                        */
+	if ((Count = a->ram_in(a, &PR_RAM->RcOutput)) != 0) {
+		dtrc(dprintf("#Rc=%x", Count));
+		/* get the buffer address of the first return code          */
+		RcIn = (RC *)&PR_RAM->B[a->ram_inw(a, &PR_RAM->NextRc)];
+		/* for all return codes do ...                              */
+		while (Count--) {
+			if ((Rc = a->ram_in(a, &RcIn->Rc)) != 0) {
+				dword tmp[2];
+				/*
+				  Get extended information, associated with return code
+				*/
+				a->ram_in_buffer(a,
+						 &RcIn->Reserved2[0],
+						 (byte *)&tmp[0],
+						 8);
+				/* call return code handler, if it is not our return code   */
+				/* the handler returns 2                                    */
+				/* for all return codes we process, we clear the Rc field   */
+				isdn_rc(a,
+					Rc,
+					a->ram_in(a, &RcIn->RcId),
+					a->ram_in(a, &RcIn->RcCh),
+					a->ram_inw(a, &RcIn->Reference),
+					tmp[0],  /* type of extended information */
+					tmp[1]); /* extended information        */
+				a->ram_out(a, &RcIn->Rc, 0);
+			}
+			/* get buffer address of next return code                   */
+			RcIn = (RC *)&PR_RAM->B[a->ram_inw(a, &RcIn->next)];
+		}
+		/* clear all return codes (no chaining!)                    */
+		a->ram_out(a, &PR_RAM->RcOutput, 0);
+		/* call output function                                     */
+		pr_out(a);
+	}
+	/* clear RNR flag                                           */
+	RNRId = 0;
+	/* if indications are available ...                         */
+	if ((Count = a->ram_in(a, &PR_RAM->IndOutput)) != 0) {
+		dtrc(dprintf("#Ind=%x", Count));
+		/* get the buffer address of the first indication           */
+		IndIn = (IND *)&PR_RAM->B[a->ram_inw(a, &PR_RAM->NextInd)];
+		/* for all indications do ...                               */
+		while (Count--) {
+			/* if the application marks an indication as RNR, all       */
+			/* indications from the same Id delivered in this interrupt */
+			/* are marked RNR                                           */
+			if (RNRId && RNRId == a->ram_in(a, &IndIn->IndId)) {
+				a->ram_out(a, &IndIn->Ind, 0);
+				a->ram_out(a, &IndIn->RNR, true);
+			}
+			else {
+				Ind = a->ram_in(a, &IndIn->Ind);
+				if (Ind) {
+					RNRId = 0;
+					/* call indication handler, a return value of 2 means chain */
+					/* a return value of 1 means RNR                            */
+					/* for all indications we process, we clear the Ind field   */
+					c = isdn_ind(a,
+						     Ind,
+						     a->ram_in(a, &IndIn->IndId),
+						     a->ram_in(a, &IndIn->IndCh),
+						     &IndIn->RBuffer,
+						     a->ram_in(a, &IndIn->MInd),
+						     a->ram_inw(a, &IndIn->MLength));
+					if (c == 1) {
+						dtrc(dprintf("RNR"));
+						a->ram_out(a, &IndIn->Ind, 0);
+						RNRId = a->ram_in(a, &IndIn->IndId);
+						a->ram_out(a, &IndIn->RNR, true);
+					}
+				}
+			}
+			/* get buffer address of next indication                    */
+			IndIn = (IND *)&PR_RAM->B[a->ram_inw(a, &IndIn->next)];
+		}
+		a->ram_out(a, &PR_RAM->IndOutput, 0);
+	}
+	return false;
 }
-byte scom_test_int(ADAPTER * a)
+byte scom_test_int(ADAPTER *a)
 {
-  return a->ram_in(a,(void *)0x3fe);
+	return a->ram_in(a, (void *)0x3fe);
 }
-void scom_clear_int(ADAPTER * a)
+void scom_clear_int(ADAPTER *a)
 {
-  a->ram_out(a,(void *)0x3fe,0);
+	a->ram_out(a, (void *)0x3fe, 0);
 }
 /*------------------------------------------------------------------*/
 /* return code handler                                              */
@@ -361,196 +361,196 @@ static byte isdn_rc(ADAPTER *a,
 		    dword extended_info_type,
 		    dword extended_info)
 {
-  ENTITY  * this;
-  byte e_no;
-  word i;
-  int cancel_rc;
+	ENTITY *this;
+	byte e_no;
+	word i;
+	int cancel_rc;
 #ifdef USE_EXTENDED_DEBUGS
-  {
-    DBG_TRC(("<A%d Id=0x%x Rc=0x%x", ((ISDN_ADAPTER *)a->io)->ANum, Id, Rc))
-  }
+	{
+		DBG_TRC(("<A%d Id=0x%x Rc=0x%x", ((ISDN_ADAPTER *)a->io)->ANum, Id, Rc))
+			}
 #else
-  dbug(dprintf("isdn_rc(Rc=%x,Id=%x,Ch=%x)",Rc,Id,Ch));
+	dbug(dprintf("isdn_rc(Rc=%x,Id=%x,Ch=%x)", Rc, Id, Ch));
 #endif
-        /* check for ready interrupt                                */
-  if(Rc==READY_INT) {
-    xdi_xlog_rc_event (XDI_A_NR(a), Id, Ch, Rc, 0, 0);
-    if(a->ReadyInt) {
-      a->ReadyInt--;
-      return 0;
-    }
-    return 2;
-  }
-        /* if we know this Id ...                                   */
-  e_no = a->IdTable[Id];
-  if(e_no) {
-    this = entity_ptr(a,e_no);
-    xdi_xlog_rc_event (XDI_A_NR(a), Id, Ch, Rc, 0, a->IdTypeTable[this->No]);
-    this->RcCh = Ch;
-        /* if it is a return code to a REMOVE request, remove the   */
-        /* Id from our table                                        */
-    if ((a->misc_flags_table[e_no] & DIVA_MISC_FLAGS_REMOVE_PENDING) &&
-        (Rc==OK)) {
-      if (a->IdTypeTable[e_no] == NL_ID) {
-        if (a->RcExtensionSupported &&
-            (extended_info_type != DIVA_RC_TYPE_REMOVE_COMPLETE)) {
-        dtrc(dprintf("XDI: N-REMOVE, A(%02x) Id:%02x, ignore RC=OK",
-                        XDI_A_NR(a),Id));
-          return (0);
-        }
-        if (extended_info_type == DIVA_RC_TYPE_REMOVE_COMPLETE)
-          a->RcExtensionSupported = true;
-      }
-      a->misc_flags_table[e_no] &= ~DIVA_MISC_FLAGS_REMOVE_PENDING;
-      a->misc_flags_table[e_no] &= ~DIVA_MISC_FLAGS_NO_RC_CANCELLING;
-      free_entity(a, e_no);
-      for (i = 0; i < 256; i++)
-      {
-        if (a->FlowControlIdTable[i] == Id)
-          a->FlowControlIdTable[i] = 0;
-      }
-      a->IdTable[Id] = 0;
-      this->Id = 0;
-      /* ---------------------------------------------------------------
-        If we send N_DISC or N_DISK_ACK after we have received OK_FC
-        then the card will respond with OK_FC and later with RC==OK.
-        If we send N_REMOVE in this state we will receive only RC==OK
-        This will create the state in that the XDI is waiting for the
-        additional RC and does not delivery the RC to the client. This
-        code corrects the counter of outstanding RC's in this case.
-      --------------------------------------------------------------- */
-      if ((this->More & XMOREC) > 1) {
-        this->More &= ~XMOREC;
-        this->More |= 1;
-        dtrc(dprintf("XDI: correct MORE on REMOVE A(%02x) Id:%02x",
-                     XDI_A_NR(a),Id));
-      }
-    }
-    if (Rc==OK_FC) {
-      a->FlowControlIdTable[Ch] = Id;
-      a->FlowControlSkipTable[Ch] = false;
-      this->Rc = Rc;
-      this->More &= ~(XBUSY | XMOREC);
-      this->complete=0xff;
-      xdi_xlog_rc_event (XDI_A_NR(a), Id, Ch, Rc, 1, a->IdTypeTable[this->No]);
-      CALLBACK(a, this);
-      return 0;
-    }
-    /*
-      New protocol code sends return codes that comes from release
-      of flow control condition marked with DIVA_RC_TYPE_OK_FC extended
-      information element type.
-      If like return code arrives then application is able to process
-      all return codes self and XDI should not cances return codes.
-      This return code does not decrement XMOREC partial return code
-      counter due to fact that it was no request for this return code,
-      also XMOREC was not incremented.
-      */
-    if (extended_info_type == DIVA_RC_TYPE_OK_FC) {
-      a->misc_flags_table[e_no] |= DIVA_MISC_FLAGS_NO_RC_CANCELLING;
-      this->Rc = Rc;
-      this->complete=0xff;
-      xdi_xlog_rc_event (XDI_A_NR(a), Id, Ch, Rc, 1, a->IdTypeTable[this->No]);
-      DBG_TRC(("XDI OK_FC A(%02x) Id:%02x Ch:%02x Rc:%02x",
-      XDI_A_NR(a), Id, Ch, Rc))
-      CALLBACK(a, this);
-      return 0;
-    }
-    cancel_rc = !(a->misc_flags_table[e_no] & DIVA_MISC_FLAGS_NO_RC_CANCELLING);
-    if (cancel_rc && (a->FlowControlIdTable[Ch] == Id))
-    {
-      a->FlowControlIdTable[Ch] = 0;
-      if ((Rc != OK) || !a->FlowControlSkipTable[Ch])
-      {
-        this->Rc = Rc;
-        if (Ch == this->ReqCh)
-        {
-          this->More &=~(XBUSY | XMOREC);
-          this->complete=0xff;
-        }
-        xdi_xlog_rc_event (XDI_A_NR(a), Id, Ch, Rc, 1, a->IdTypeTable[this->No]);
-        CALLBACK(a, this);
-      }
-      return 0;
-    }
-    if (this->More &XMOREC)
-      this->More--;
-        /* call the application callback function                   */
-    if (((!cancel_rc) || (this->More & XMOREF)) && !(this->More & XMOREC)) {
-      this->Rc = Rc;
-      this->More &=~XBUSY;
-      this->complete=0xff;
-      xdi_xlog_rc_event (XDI_A_NR(a), Id, Ch, Rc, 1, a->IdTypeTable[this->No]);
-      CALLBACK(a, this);
-    }
-    return 0;
-  }
-        /* if it's an ASSIGN return code check if it's a return     */
-        /* code to an ASSIGN request from us                        */
-  if((Rc &0xf0)==ASSIGN_RC) {
-    e_no = get_assign(a, Ref);
-    if(e_no) {
-      this = entity_ptr(a,e_no);
-      this->Id = Id;
-      xdi_xlog_rc_event (XDI_A_NR(a), Id, Ch, Rc, 2, a->IdTypeTable[this->No]);
-        /* call the application callback function                   */
-      this->Rc = Rc;
-      this->More &=~XBUSY;
-      this->complete=0xff;
+	/* check for ready interrupt                                */
+	if (Rc == READY_INT) {
+		xdi_xlog_rc_event(XDI_A_NR(a), Id, Ch, Rc, 0, 0);
+		if (a->ReadyInt) {
+			a->ReadyInt--;
+			return 0;
+		}
+		return 2;
+	}
+	/* if we know this Id ...                                   */
+	e_no = a->IdTable[Id];
+	if (e_no) {
+		this = entity_ptr(a, e_no);
+		xdi_xlog_rc_event(XDI_A_NR(a), Id, Ch, Rc, 0, a->IdTypeTable[this->No]);
+		this->RcCh = Ch;
+		/* if it is a return code to a REMOVE request, remove the   */
+		/* Id from our table                                        */
+		if ((a->misc_flags_table[e_no] & DIVA_MISC_FLAGS_REMOVE_PENDING) &&
+		    (Rc == OK)) {
+			if (a->IdTypeTable[e_no] == NL_ID) {
+				if (a->RcExtensionSupported &&
+				    (extended_info_type != DIVA_RC_TYPE_REMOVE_COMPLETE)) {
+					dtrc(dprintf("XDI: N-REMOVE, A(%02x) Id:%02x, ignore RC=OK",
+						     XDI_A_NR(a), Id));
+					return (0);
+				}
+				if (extended_info_type == DIVA_RC_TYPE_REMOVE_COMPLETE)
+					a->RcExtensionSupported = true;
+			}
+			a->misc_flags_table[e_no] &= ~DIVA_MISC_FLAGS_REMOVE_PENDING;
+			a->misc_flags_table[e_no] &= ~DIVA_MISC_FLAGS_NO_RC_CANCELLING;
+			free_entity(a, e_no);
+			for (i = 0; i < 256; i++)
+			{
+				if (a->FlowControlIdTable[i] == Id)
+					a->FlowControlIdTable[i] = 0;
+			}
+			a->IdTable[Id] = 0;
+			this->Id = 0;
+			/* ---------------------------------------------------------------
+			   If we send N_DISC or N_DISK_ACK after we have received OK_FC
+			   then the card will respond with OK_FC and later with RC==OK.
+			   If we send N_REMOVE in this state we will receive only RC==OK
+			   This will create the state in that the XDI is waiting for the
+			   additional RC and does not delivery the RC to the client. This
+			   code corrects the counter of outstanding RC's in this case.
+			   --------------------------------------------------------------- */
+			if ((this->More & XMOREC) > 1) {
+				this->More &= ~XMOREC;
+				this->More |= 1;
+				dtrc(dprintf("XDI: correct MORE on REMOVE A(%02x) Id:%02x",
+					     XDI_A_NR(a), Id));
+			}
+		}
+		if (Rc == OK_FC) {
+			a->FlowControlIdTable[Ch] = Id;
+			a->FlowControlSkipTable[Ch] = false;
+			this->Rc = Rc;
+			this->More &= ~(XBUSY | XMOREC);
+			this->complete = 0xff;
+			xdi_xlog_rc_event(XDI_A_NR(a), Id, Ch, Rc, 1, a->IdTypeTable[this->No]);
+			CALLBACK(a, this);
+			return 0;
+		}
+		/*
+		  New protocol code sends return codes that comes from release
+		  of flow control condition marked with DIVA_RC_TYPE_OK_FC extended
+		  information element type.
+		  If like return code arrives then application is able to process
+		  all return codes self and XDI should not cances return codes.
+		  This return code does not decrement XMOREC partial return code
+		  counter due to fact that it was no request for this return code,
+		  also XMOREC was not incremented.
+		*/
+		if (extended_info_type == DIVA_RC_TYPE_OK_FC) {
+			a->misc_flags_table[e_no] |= DIVA_MISC_FLAGS_NO_RC_CANCELLING;
+			this->Rc = Rc;
+			this->complete = 0xff;
+			xdi_xlog_rc_event(XDI_A_NR(a), Id, Ch, Rc, 1, a->IdTypeTable[this->No]);
+			DBG_TRC(("XDI OK_FC A(%02x) Id:%02x Ch:%02x Rc:%02x",
+				 XDI_A_NR(a), Id, Ch, Rc))
+				CALLBACK(a, this);
+			return 0;
+		}
+		cancel_rc = !(a->misc_flags_table[e_no] & DIVA_MISC_FLAGS_NO_RC_CANCELLING);
+		if (cancel_rc && (a->FlowControlIdTable[Ch] == Id))
+		{
+			a->FlowControlIdTable[Ch] = 0;
+			if ((Rc != OK) || !a->FlowControlSkipTable[Ch])
+			{
+				this->Rc = Rc;
+				if (Ch == this->ReqCh)
+				{
+					this->More &= ~(XBUSY | XMOREC);
+					this->complete = 0xff;
+				}
+				xdi_xlog_rc_event(XDI_A_NR(a), Id, Ch, Rc, 1, a->IdTypeTable[this->No]);
+				CALLBACK(a, this);
+			}
+			return 0;
+		}
+		if (this->More & XMOREC)
+			this->More--;
+		/* call the application callback function                   */
+		if (((!cancel_rc) || (this->More & XMOREF)) && !(this->More & XMOREC)) {
+			this->Rc = Rc;
+			this->More &= ~XBUSY;
+			this->complete = 0xff;
+			xdi_xlog_rc_event(XDI_A_NR(a), Id, Ch, Rc, 1, a->IdTypeTable[this->No]);
+			CALLBACK(a, this);
+		}
+		return 0;
+	}
+	/* if it's an ASSIGN return code check if it's a return     */
+	/* code to an ASSIGN request from us                        */
+	if ((Rc & 0xf0) == ASSIGN_RC) {